MT-1 Basics: A Comprehensive Overview of LOMAs and Discussion of Common Application Setbacks

Transcription

1 MT-1 Basics: A Comprehensive Overview of LOMAs and Discussion of Common Application Setbacks

2 Introduction: Terminology MT-1s vs. MT-2s LOMAs vs. LOMRs What is a LOMC? Letters of Map Change (LOMCs) MT-1s Map Amendments or LOMAs MT-2s Map Revisions or LOMRs

3 Introduction: MT-1 Applications Increased understanding of LOMC requirements Application submittals are complete Adhere to NFIP regulations Follow current FEMA guidelines Will lead to: Quicker reviews Fewer additional data requests Faster determinations Happier stakeholders/requestors Happier FEMA

4 MT-1 Agenda Who may need a LOMA and why Types of applications Data requirements ESA compliance Community s role eloma OAS Common issues Zone A BFEs

5 Who cares about LOMAs and why? Lenders Required lender actions through National Flood Insurance Reform Act of 1994: Determine whether building is located in SFHA Document determination Require that flood insurance to the appropriate limit be maintained Over the term of the loan, ensure flood insurance is maintained or added if building subsequently becomes part of SFHA

6 Who cares about LOMAs and why? Community officials Required community official actions: Establish minimum regulatory standards Review projects impacting the NFIP floodplain per 44 CFR Ensure that permits are applied for

7 Who cares about LOMAs and why? Property Owners Required property owner actions: Purchase flood insurance or Apply for LOMA, LOMR-F, etc. if they want have insurance requirement removed

8 Types of applications Map Amendments (MT-EZ and MT-1) LOMA CLOMA LOMR-FW LOMR-F CLOMR-F eloma Letter of Map Amendment Conditional Letter of Map Amendment Letter of Map Revision in Floodway Letter of Map Revision Based on Fill Conditional Letter of Map Revision Based on Fill Electronic Letter of Map Amendment

9 Types of applications LOMA: A letter from DHS-FEMA stating that an existing structure or parcel of land that has not been elevated by fill (natural grade) would not be inundated by the base flood. CLOMA: A letter from DHS-FEMA stating that a proposed structure that is not to be elevated by fill (natural grade) would not be inundated by the base flood if built as proposed.

10 Types of applications LOMA or CLOMA Results from limitations or inaccuracies in the base mapping used for Flood Insurance Studies. Based on natural ground, without fill or other physical changes to the SFHA, NFIP regulatory floodway, or BFEs. CLOMAs may be required by the community in order to obtain a building permit. (Requires submittal of certified asbuild data after project completion for a LOMA to be issued).

11 Types of applications LOMR-F: A letter from DHS-FEMA stating that an existing structure or parcel of land that has been elevated by fill would not be inundated by the base flood. CLOMR-F: A letter from DHS-FEMA stating that a parcel of land or proposed structure that will be elevated by fill would not be inundated by the base flood if fill is placed on the parcel as proposed or the structure is built as proposed.

12 Types of applications LOMR-F or CLOMR-F Fill placement is/will be outside the NFIP regulatory floodway. Community acknowledges the placement of fill and asserts that all community floodplain management requirements are/will be met. CLOMR-Fs may be required by the community in order to obtain a building permit. (Requires submittal of certified as-built data after project completion for a LOMR-F to be issued).

13 Types of applications MT-1 May be used for all LOMAs, CLOMAs, LOMRs, and CLOMR-Fs MT-EZ May only be used for LOMAs Single structure/lot Must be outside of floodway

14 Types of applications Who can complete the MT-1 or MT-EZ form? Where can the application form be found? How long does it take to receive a determination?

15 Data requirements Property Information Form Recorded deed or plat map Local tax map showing property Elevation Form or Certificate Effective FIRM Panel

16 Data requirements Vicinity maps Certified Site Survey ESA Compliance: Procedure Memorandum No. 64 Metes and bounds descriptions and accompanying maps BFEs for Zone A areas

17 Common Issues 7000 Frequency of MT-1 Data Requests Types FY10 FY11 0

18 Common issues Number 1: Failing Number to 2: answer all the questions, Failing to especially provide contat Has information, fill been placed or sign on and your date property? the form

19 Common issues Recorder s Stamp Document Number Legal Description

20 Common issues VS

21 Common issues

22 Common issues Point of Beginning P.E. or L.S. certification

23 Common issues Metes and Bounds Area P.E. or L.S. certification

24 Out As Shown Determinations Determination type not an application Use MT-EZ application form Situation where certified elevations are not needed Omit elevations

25 BFEs for Zone A areas BFE Calculation - 50 Lots/5 acres Possible data sources include: U.S Army Corps of Engineers State/Commonwealth agencies (i.e. Department of Natural Resources, Department of Environmental Quality, Department of Transportation, etc.) Local community s Engineering, Planning, or Building Department

26 Community s role When is the Community Acknowledgment form needed? Request is for a LOMR-F / CLOMR-F (Section A) Request involves a structure or property that has been inadvertently included within the NFIP regulatory floodway (Section B) Why is the form needed? Provides FEMA written assurance that the community is aware that the structure or property is located within the NFIP regulatory floodway and meets all community floodplain management requirements (Section B)

27 Community s role Why is the form needed (continued)? Provides FEMA with written assurance that the LOMR-F / CLOMR-F request meets / will meet the minimum floodplain management requirements of the NFIP (Section 60.3) and is reasonably safe from flooding (Section A) Existing residential structures have their lowest floor elevated to or above the BFE The community has issued all permits for existing or proposed construction or other development There have been no encroachments to the NFIP regulatory floodway Who can complete the form? Community official responsible for floodplain management

28 Community s role Community Acknowledgment Form

29 eloma Determination Tool What is an eloma? eloma is a Web-based application within the Mapping Information Platform (MIP) that provides Licensed Land Surveyors and Professional Engineers (Licensed Professionals) with a system to submit simple Letter of Map Amendment (LOMA) requests to FEMA. Map determination companies that are NFDA members can also submit elomas (Certified Professionals). Only existing single residential structures or entire legally recorded properties qualify

30 eloma Determination Tool Why use it? It is fast and easy eloma requests audited by FEMA are processed within 5 business days of receiving all required supporting data from the Licensed Professional Business for your local engineer/surveyor FEMA performs random audits of eloma submittals

31 Types of applications eloma May be used for LOMA requests for single structures or single lots eloma Limitations: Must not contain fill Must be in a detailed studied areas AE, A1-30, or AH (No A, V, AO, or D zones) Must not be in a floodway No multi-lot requests Must not be a metes and bounds request