GUJARAT STATE ELECTRICITY CORP. LTD. WANAKBORI THERMAL POWER STATION TAL. GALTESWAR, DIST.KHEDA, TECH BID RFQ NO: NAME OF WORK:

Transcription

1 GUJARAT STATE ELECTRICITY CORP. LTD. WANAKBORI THERMAL POWER STATION TAL. GALTESWAR, DIST.KHEDA, WEB TENDER NOTICE NO: 229 /15/W TECH BID RFQ NO: NAME OF WORK: TENDER FOR THE WORK OF REMOVING OF OLD METALLIC EXPANSION BELLOW & REPLACEMENT OF NEW METALLIC EXPANSION BELLOW OF FLUE GAS INLET TO APH DUCT A & B OF BOILER UNIT # 4, 5 & 6 AT WANAKBORI TPS. 1 of 23

2 GUJARAT STATE ELECTRICITY CORPORATION LIMITED Wanakbori Thermal Power Station, Taluka:Galteshwar, Dist:Kheda Ph Fax: , AN ISO-9001:2008, ISO-14001:2004, OHSAS 18001:2007 Certified Power Plant CIN: U40100GJ1993SGC RFQ NO TECHNICAL BID Work of removing of old Metallic expansion bellow & Replacement of new Metallic expansion bellow of flue gas inlet to APH duct A & B of Boiler unit #4, 5 & 6 at Wanakbori TPS. Due on At 3.30 P.M. (if Possible) EMD paid YES/NO Please mention the EMD Receipt No. Date: OR D.D. No. Date: NOTE: THE UNDER SIGNED RESERVES THE RIGHT TO REJECT ANY OR ALL TENDERS WITHOUT ASSIGNING ANY REASONS THERE OF. TENDER FEE SHALL BE ACCEPTED BY DD IN FAVOUR OF GUJARAT STATE ELECTRICITY CORPORATION LIMITED PAYABLE AT DENA BANK, WANAKBORI BRANCH. THE SD / E.M.D. WILL BE ACCEPTED BY D.D. IN FAVOUR OF 'GUJARAT STATE ELECTRICITY CORPORATION LTD., PAYABLE AT DENA BANK WANAKBORI BRANCH OR BANK GUARANTEE ISSUED BY FOLLOWING BANKS WILL ONLY BE ACCEPTED AS SD/EMD The Earnest money Deposit will be accepted in form of DD or Bank Guarantee drawn in favour of GUJARAT STATE ELECTRICITY CORPORATION LTD payable at Dena Bank, Wanakbori Branch only. (A) Guarantees Issued by following banks will be accepted as SD/EMD on payment basis. (1) All Nationalized banks including public sector Bank IDBI Bank Ltd. (2) Private Sector Bank authorized By RBI to undertake State Government Business (At present AXIS Bank, ICICI Bank and HDFC Bank) (B) Guarantees issued by following banks will be accepted as SD/EMD for period up to March 31,2015. The validity cut of date in GR is with respect to dated of issue of Bank Guarantee irrespective of date of termination of Bank Guarantee. (1) Commercial Bank (1) Kotak Mahindra Bank. (2) Yes bank (3) Indusland Bank (4) Ratnakar Bank (5) Karur Vysya Bank (6) DCB Bank (7) Federal Bank (8) South Indian Bank (2) Co-operative Banks of Gujarat. (1)The Kalupur Commercial Co-operative Bank Ltd. (2)Rajkot Nagrik Sahakari Bank Ltd. (3)The Ahmedabad Mercantile Co-operative Bank Ltd. (4)The Mehsana Urban Co-operative Bank Ltd. (5)Nutan Nagrik Sahakari Bank Ltd. (6)Dena Gujarat Gramin Bank. THE BANK GUARANTEE OF ANY OTHER CO-OPERATIVE BANK AND OTHER SCHEDULED BANKS ETC. WILL NOT BE ACCEPTED. 2 of 23

3 GUJARAT STATE ELECTRICITY CORPORATION LIMITED WANAKBORI THERMAL POWER STATION TAL. GALTESWAR, DIST.KHEDA PIN: Tender for the work of removing of old Metallic expansion bellow & Replacement of new Metallic expansion bellow of flue gas inlet to APH duct A & B of Boiler unit # 4, 5 & 6 at Wanakbori TPS. INDEX S.L. NO DOCUMENT PAGE NO. 1 Tender notice 5 to 7 2 Qualifying criteria 8 3 Schedule A (Scope of work) 9 to 10 4 Annexure A 11 5 Black listing undertaking 12 6 General condition of contract 13 TO 18 7 Circular Safety rules 20 to 22 9 Schedule - B 23 3 of 23

4 GUJARAT STATE ELECTRICITY CORPORATION LIMITED Wanakbori Thermal Power Station, Taluka:Galteshwar, Dist:Kheda Ph Fax: , AN ISO-9001:2008, ISO-14001:2004, OHSAS 18001:2007 Certified Power Plant CIN: U40100GJ1993SGC WANAKBORI T.P.S. DIST. KHEDA ACKNOWLEDGMENT OF TENDER FEE & EMD Name of work: - Work of removing of old Metallic expansion bellow & Replacement of new Metallic expansion bellow of flue gas inlet to APH duct A & B of Boiler unit # 4, 5 & 6 at Wanakbori TPS. TENDER FEE PAID VIDE DEMAND DRAFT NO. DATE RS. EARNEST MONEY DEPOSIT PAID VIDE D.D. / B.G. NO. DATE RS. NOTE: THE UNDER SIGNED RESERVES THE RIGHT TO REJECT ANY OR ALL TENDERS WITHOUT ASSIGNING ANY REASONS THERE OF. TENDER FEE SHALL BE ACCEPTED BY DD IN FAVOUR OF GUJARAT STATE ELECTRICITY CORPORATION LIMITED PAYABLE AT DENA BANK, WANAKBORI BRANCH. THE SD / E.M.D. WILL BE ACCEPTED BY D.D. IN FAVOUR OF 'GUJARAT STATE ELECTRICITY CORPORATION LTD., PAYABLE AT DENA BANK WANAKBORI BRANCH OR BANK GUARANTEE ISSUED BY FOLLOWING BANKS WILL ONLY BE ACCEPTED The Earnest money Deposit will be accepted in form of DD or Bank Guarantee drawn in favour of GUJARAT STATE ELECTRICITY CORPORATION LTD payable at Dena Bank, Wanakbori Branch only. (B) Guarantees Issued by following banks will be accepted as SD/EMD on payment basis. (1) All Nationalized banks including public sector Bank IDBI Bank Ltd. (3) Private Sector Bank authorized By RBI to undertake State Government Business (At present AXIS Bank, ICICI Bank and HDFC Bank) (B) Guarantees issued by following banks will be accepted as SD/EMD for period up to March 31,2015. The validity cut of date in GR is with respect to dated of issue of Bank Guarantee irrespective of date of termination of Bank Guarantee. (1) Commercial Bank (1) Kotak Mahindra Bank. (2) Yes bank (3) Indusland Bank (4) Ratnakar Bank (5) Karur Vysya Bank (6) DCB Bank (7) Federal Bank (8) South Indian Bank (2) Co-operative Banks of Gujarat. (1)The Kalupur Commercial Co-operative Bank Ltd. (2)Rajkot Nagrik Sahakari Bank Ltd. (3)The Ahmedabad Mercantile Co-operative Bank Ltd. (4)The Mehsana Urban Co-operative Bank Ltd. (5)Nutan Nagrik Sahakari Bank Ltd. (6) Dena Gujarat Gramin Bank. THE BANK GUARANTEE OF ANY OTHER CO-OPERATIVE BANK AND OTHER SCHEDULED BANKS ETC. WILL NOT BE ACCEPTED. 4 of 23

5 GUJARAT STATE ELECTRICITY CORPORATION LIMITED Wanakbori Thermal Power Station, Taluka:Galteshwar, Dist:Kheda Ph Fax: , AN ISO-9001:2008, ISO-14001:2004, OHSAS 18001:2007 Certified Power Plant CIN: U40100GJ1993SGC Tender Notice No: 229/15/W RFQ NO: Sealed percentage rate tenders are invited for the work of removing of old Metallic expansion bellow & Replacement of new Metallic expansion bellow of flue gas inlet to APH duct A & B of Boiler unit # 4, 5 & 6 at Wanakbori TPS from Contractors who have executed works of similar nature in GSECL / GETCO / DISCOM / Central /State Government / Railway/Semi Govt. as per pre qualification criteria of work successfully. Tendered should down load the tender documents online from the web site submit the same as per instruction therein by RPAD only. RFQ No Name of Work Removal / erection / alignment /welding of 7 X 10 & 5 X 7 fold metallic expansion bellows of flue gas duct of APH inlet and removing & re-fixing of cover plate inside the ducts along with required scaffolding erection & dismantling as per scope of work and instruction of EIC of GSECL. Estimate d Cost Rs Time Limit 11 MONTHS Tender Fee Rs. E.M.D. Rs Last date of submission of tender (technical and price bid) up to Hrs. Date of Opening of technical bid. (in presence of willing bidders) at Hrs. : Date of opening of Price bid. (in presence of qualified bidders) : Validity of tender from the date of opening of technical bid Will be informed afterwards to technically qualified bidders. 180 days No tenders shall be accepted / opened in any case received after due date and time of receipt of tender, irrespective of delay due to postal services or any other reasons and the GSECL shall not assume any responsibility for late receipt of tender. The tenders are to be submitted by the intending bidders in two separate sealed and super scribed envelopes as listed below: Envelope No.1: Technical bid and Qualifying criteria data, details specification. Envelope No. 2: Price Bid. NOTE: - 1. D.D. for Tender fee & EMD should be placed in separate envelope which should attached separately with Technical bid cover as per instructions contained in Tender documents. 2. Technical and qualifying criteria of bid details specification (envelope No.1) will be opened first and subject to evaluation, based on the qualification criteria contained in the individual bid document. 5 of 23

6 Price bids (Envelope No.2) of bidders who are assessed and declared as substantially technically responsive on evaluation of the technical bid will be opened for further commercial evaluation. Terms & Condition: - It is necessary to specify the name of the work on closed cover while bidding the tender. The full particulars can be had in the tender, which can be downloaded from the web site N.B.: 1. Hard copy of Technical bid will be accepted only by RPAD on or before due date. Tender received late will not be accepted. Any alterations, modifications to bids received after opening of tender shall not be considered unless called for by the GSECL The Earnest money Deposit will be accepted in form of DD or Bank Guarantee drawn in favour of GUJARAT STATE ELECTRICITY CORPORATION LTD payable at Dena Bank, Wanakbori Branch only. (C) Guarantees Issued by following banks will be accepted as SD/EMD on payment basis. (1) All Nationalized banks including public sector Bank IDBI Bank Ltd. (4) Private Sector Bank authorized By RBI to undertake State Government Business (At present AXIS Bank, ICICI Bank and HDFC Bank) (B) Guarantees issued by following banks will be accepted as SD/EMD for period up to March 31,2015. The validity cut of date in GR is with respect to dated of issue of Bank Guarantee irrespective of date of termination of Bank Guarantee. (1) Commercial Bank (1) Kotak Mahindra Bank. (2) Yes bank (3) Indusland Bank (4) Ratnakar Bank (5) Karur Vysya Bank (6) DCB Bank (7)IFEDERAL Bank (8) South Indian bank (2) Co-operative Banks of Gujarat. (1)The Kalupur Commercial Co-operative Bank Ltd. (2)Rajkot Nagrik Sahakari Bank Ltd. (3)The Ahmedabad Mercantile Co-operative Bank Ltd. (4)The Mehsana Urban Co-operative Bank Ltd. (5)Nutan Nagrik Sahakari Bank Ltd. (6) Dena Gujarat Gramin Bank THE BANK GUARANTEE OF ANY OTHER CO-OPERATIVE BANK AND OTHER SCHEDULED BANKS ETC. WILL NOT BE ACCEPTED. It is mandatory to submit security Deposit before order placement. Party shall have to pay security deposit of 5% of contract value within 10 days from the date of letter of intent. Such Security Deposit will be payable either in D. D. / Bank Guarantees. Bank Guarantees from Scheduled / Nationalized Banks will be acceptable if the amount of security Deposit payable exceed Rs. 5,000/-. The Bank Guarantees will be executed on the standard form prescribed by the corporation. In case of the Bank Guarantees furnished / submitted they should have clear one time validity till the completion of the order in all respects and up to the expiry of the Guarantee period from the date of work completion. Bank Guarantee for interim period will not be allowed. If by any reasons the work period is extended then contractor should undertake to renew the Bank Guarantee at least one month before the expiry of the validity failing which GSECL will be at liberty to encash the same. If the full Security Deposit amount is not paid immediately after the receipt of the Letter of Intent, then the order will not be placed (at the discretion of the GSECL) and without entering into any correspondences and this will be binding on the tenderer. If the tenderer fails to pay the Security Deposit or defaults in execution of the orders placed or if GSECL suffers any financial loss due to this, then GSECL will be at liberty to adjust the amount from other orders of the same firm or by encasing the Bank Guarantee. Failure to deposit the SD will entail for fore fitting of EMD and the contract shall be treated as terminated. You shall not be, allowed to start the work if, SD is not paid. Any loss to the GSECL due to late start of the work because of the late payment of SD shall be contractor s liability. 6 of 23

7 N.B.:RTGS/NEFT Bank Details Bank Name & Branch :- Dena Bank Wanakbori, Ta:- Galteswar, Dist:- Kheda, Pin (Gujarat) Account No MICR No IFSC No- BKDN (a) DD no & bank guarantee no and date should be mention on envelop invariably on technical cover as well as main cover. (b) Copy of tranjection acnolodgement slip of AEFT/RTGS should be submitted along with tender. 1. Tenderer should fulfill the condition of all qualifying criteria mentioned in sheet of Qualifying criteria. Failing to which Tender shall be rejected. 2. Tender without EMD and Tender fee shall be rejected. 3. Chief Engineer, WTPS reserves right either to accept or reject any or all tenders without assigning any reasons. 4. Subletting of Tender shall not be allowed. 5. Tenderers shall also certify that quated tender is UNCONDITIONAL on tender covers itself. 6. Corporation reserve right to split the contract. Signature of contractor. Chief Engineer (C & O) GSECL, WTPS 7 of 23

8 Qualifying criteria. A. Party should have done such type of works during last five (05) years satisfactorily at Wanakbori TPS OR other Thermal Power stations of GSECL, NTPC or other Electricity Board/IPP/Govt/Semi gov in the later case. Documentary proof of having executed such or similar type of orders will have to be produced along with Technical bid. However, submission of such documentary proof by party will not automatically qualify the party as to its capability to execute such or similar type of orders and the Corporation shall assess the capability of the party at the time of evaluation of the Technical bid. B. Tender submitted without payment of EMD will not be opened or considered. C. Subletting of tender is not permitted. D. The contractor shall have to produce copies of last two years income tax returned certificate. E. Contractor shall have to submit the valid copy of Bank solvency certificate of 20% of estimated value. F. Corporation reserve right to split the contract. G. Chief Engineer, WTPS reserves right either to accept or reject any or all tenders without assigning any reasons. H. Contractor should have a valid separate PF A/C and contract labour should be covered under PF A/C. I. The contractor shall have to produce copy of valid workman Group insurance policy covering all the labors who are going to work at WTPS site. J. The contractor shall have to produce copy of valid labor license from the Asstt. Labour Commissioner, Nadiad. K. For fulfillment of all the Labour laws, liabilities before starting of the contract work, contractor should give the assurance/indemnity bond on non judicial stamp paper of Rs. 100/- to GSECL, WTPS or as per the tender amount. L. The contractor has to submit copy of PAN card, Service Tax Reg. Certificate and TIN No. along with the tender documents. 8 of 23

9 GUJARAT STATE ELECTRICITY CORPORATION LIMITED WANAKBORI THERMAL POWER STATION TAL. GALTESWAR. DIST. KHEDA. SCHEDULE A Sub:- Job works for removing of old Metallic expansion bellow & Replacement of new Metallic Expansion bellow of flue gas inlet to APH duct A & B of Boiler unit # 4, 5 & 6 at Wanakbori TPS. 1. The time is the essence of the contractor and the party shall have to ensure that work mentioned in the Schedule `B has to be completed within 15 days in AOH & 25 working days in COH, days counting from the date of L/C issued/instruction of GSECL EIC. 2. The payment will be made as per the actually work done only. 3. The work shall be commenced by all the concerned party after ensuring the issue of L/C by the department. It will be the responsibility of the party to take care in this aspect for safety purpose. 4. Party shall have to submit the material account in triplicate along with the bill. 5. Subletting the contract to other contractor is not permitted unless it is approved by the competent authority of GSECL. 6. Party shall have to attend daily meeting invariably to review the work progress and to receive communication. Failing to which penalty of Rs per day shall be recovered from Bill. 7. Party shall have to submit daily progress report in prescribed format. Failing to which penalty of Rs per day shall be recovered from Bill. 8. The contractor shall offer a Guarantee for a period of 6 (six) months from the date of commissioning of unit towards poor workmanship. 10. The contractor shall have to offer for kerosene test for leakage checking after completion of work. 11. The party shall have to work round the clock to complete the given job in stipulated time period. 12. The party should have to co-ordinate with other agencies during work execution for safety purpose. SPECIFICATION/ SCOPE OF WORK: Scope of work consists of as follows but shall not be limited to REMOVAL OF DAMAGED / ERODED EXPANSION JOINTS: The scope of work includes the preparation of necessary temporary scaffolding at elevated location of expansion joint with their own scaffolding materials, locking the respective duct by means of welding of channel / beam before cutting the eroded expansion joints to maintain the original width of joints, cutting the eroded expansion joints (7X10 fold & 5X7 fold)) by means of gas cutting, removing the same form respective duct and crediting the same scrap in main store as per instruction of EIC. The scope of work also includes removal of insulation cladding and insulation materials required to uncover and cutting of respective damaged / eroded expansion joints. Quantity of work shall be considered on actual cutting length of expansion joints. 2. Removal of cover plate, fabrication of cover plate, alignment & welding of cover plate is in the scope of contractor. 3. The replacement/repairing of economizer, LTSH and APH area is also in parallel work, so that contractor has to arrange special type scaffolding (above & bellow expansion joint) to work smoothly in economizer, LTSH and APH area. 4. Contractor has to coordinate with all the contractors who are working in economizer, LTSH and APH area to avoid un necessary disputes. 5. It is responsibility of contractor to watch out that the work of economizer, LTSH and APH area is not be suffered due to expansion bellow replacement work. 5. ERECTION, ALIGNMENT & WELDING OF 7 X 10 FOLD & 5 X 7 FOLD EXPANSION JOINTS: (a) (b) (c) (d) The scope of work includes as follows. Cleaning the edges of respective duct at which new expansion joints to be erected and welded. Edge preparation of respective duct by means of grinding. Transportation of required size of new metallic expansion joints from main store to site including means of transportation at their own cost. Shifting of new expansion joints or pieces of expansion joints from main store to site to respective 9 of 23

10 (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) location where it is to be erected is in the scope of contractor. Required lifting tools tackles (i.e. chain pulley block, wire slings & pulleys etc.) shall have to be arranged by the contractor at their own cost. Placement and alignment of new expansion joints with corner either in single piece or in more than one piece in respective position and seal welding the same. Any rectification if required for matching the gap of cut portion of respective duct & width of new expansion joints by means of pressing/expanding shall have to be arranged by the contractor at their own cost. Removing the lock of new expansion joints to release the load on it. Removing and cutting of temporary locking of respective duct. Removing of scaffolding. Welding should be free from any kind of welding defect. Welding shall have to be rectified if any defect noticed. Cleaning of surrounding area by disposing off the debris, scrap materials etc. Attending the leakages, if any noticed during charging the duct with gas and air. Quantity of work shall be considered on actual length of welding joint of installed expansion joint. Use suitable size of welding electrode of ISI brand confirming to AWS-6013 series only for metallic expansion bellows. If required and not included above any extra work will be carried out by contractor, it is in party s scope. 6. FABRICATION & INSTALLATION OF SEAL COVER PLATE ON EXPANSION JOINTS: The scope of work include transportation of MS plates/angles from main store, transportation of same from main store to site including transportation means, fabrication of seal cover plate of required width by cutting and grinding the edges of same, shifting the seal cover plate from site to the location of installation by means of lifting tackles, removing of eroded seal cover plate, installation and providing of new fabricated seal cover plate on expansion joints from inside, welding of seal cover plate from one side only as per instruction of EIC & other side should be free for accommodating of expansion, crediting of scrap and any surplus materials to main store. The welding should be free from any kind of welding defect. Welding shall have to be rectified if any defect noticed. Besides of above, if any extra work related to this job is not mentioned in this, but it is required for complete this job shall have to be carried out by the contractor within the quoted rate only. SCOPE OF CONTRACTOR 1. Party has to procure & use the general purpose welding electrodes for mild steel application which are approved by Corporation in ARC / any ISI make confirming to AWS-6013 series. The detail of such welding electrodes is available with Engineer in charge & which may be used by party in concurrence with Engineer in charge. 2. Oxygen/DA gas cylinder, kerosene/diesel/cotton waste, restolene etc. are in the contractor s scope. Contractor has to produce the entry gate pass to Engineer in charge as and when asked, 3. All the transporting means loading and unloading of materials / spares from Main store to Site shall have to arrange by Contractor at their own cost. 4. The party has to arrange for 24 V transformer/battery torches to be utilized as safety equipment while carrying out work inside of equipments/at higher elevation. The party has to provide required capacity of welding machine SCOPE OF GSECL 1. Metallic Expansion bellow (7 X 10 fold & 5 X 7 fold) will be issued by GSECL free of cost in piece form from main store. 2. Electric supply will be arranged by GSECL free of cost at one point near work place; extension will be arranged by the contractor. 3. Necessary MS plate for cover palate will be issued by GSECL free of cost from main store. 10 of 23

11 GUJARAT STATE ELECTRICITY CORPORATION LIMITED TA-GALTESWAR DIST. - KHEDA ANNEXURE A 1. All necessary tools and tackles such as chain pulley blocks, welding generator sets, hook-chooks, wire slings, spanner, gas cutting sets, welding cables, grinding machines etc. shall be arranged by the party at his own cost. 2. At any time it is found that work force of the party is inadequate and progress of the work is not be to the satisfaction of GSECL, other agencies/departmental personnel will be put to carry out work. Amount so incurred will be recovered from the party s bill. In this case the decision of the Engineer in charge of WTPS shall be final and binding on the contractor/party. 3. The time is the essence of the contract and the party shall have to ensure that work is completed within stipulated period, in the contract, keeping personnel round the clock otherwise penalty will be charged at the rate of 1/2% per week subject to maximum of 10% of the contract value as per the Corporation s rules. 4. Party shall indemnity GSECL against for any injury and/or damages that may be caused in his man or material. Moreover the party shall be fully responsible for any damaged caused to the Corporation s properties done by his men/materials, while executing the work. The CORPORATION will be entitled to recover the damages from the party s bill. 5. Party should take all necessary precautions during execution of the work and all labours of the party should utilize all types of safety applications during work in plant area to prevent the accident as per factory acts/rules. 6. The electrical connection and electricity to the party s welding generator sets and other equipments such as grinding sets etc. shall be given by the GSECL free of cost at one point only near to working place, as directed by EIC. 7. This is a rate contract for a period of 11 months counted from the date of commencement of work and can be same rates and terms. The CORPORATION reserves the right to extend this annual contract for further period of six months, as deemed suitable, considering the balance quantities yet to complete, and it will be binding to the party. The rates and other terms and conditions will remain same as per original order for the extended period. 8. The conditional tender will not be accepted withdrawal of condition unilaterally after opening of tender will not be permitted. Chief Engineer, WTPS reserves right either to accept or reject under all tender without assigning any reasons. 9. The labour laws in existence and which may modify from time to time shall be binding to the party. 10. The party will have to execute an indemnity bond and agreement on non judicial stamp paper of appropriate value. The cost of the stamp shall be borne by the party. 11. The CORPORATION reserves the right to split each item in to more than one agency and place the order accordingly. All parties should therefore, carefully evaluate and fill up the rate item wise keeping themselves ready to execute order for any one or more allotted to them by the CORPORATION. 12. The CORPORATION reserves the right to terminate the contract at any time by giving seven days notice to the party without entertaining of claim/compensation. 13. The contractor shall have to arrange to remove the day to day scrap materials from site and deposit to GSECL main stores/bmd.ii site stores as per the instruction of Engineer in charge. The site must have to be kept cleared before starting/commissioning of equipments/unit otherwise 5% of the contractor order value of the amount or expenditure actually incurred will be recovered from the party s bill without assigning any reason in the event of non removal of scrap. 14. Rates are quoted to be firm and hence no price and labour escalation will be applicable. 15. The spares, pertaining to equipment components, packing ropes, MS plates, gasket etc. will be issued free of cost from GSECL store as per requirement of the work. 16. Contractor shall have to prepare the material account and shall have to submit the same in triplicate along with the bill. 17. The RA bills may be raised by the party on completion of works per unit quantity wise. 11 of 23

12 UNDERTAKING IN REGARD TO STOP DEAL / BLACK LIST THEREOF All bidders will have to furnish the following undertaking duly filled in, signed and stamped for each quoted item of the tender along with the Technical Bid. I/We authorized signatory of M/s _here by certify that M/s is not stop deal/black listed by GUVNL and or their any subsidiary company viz. GSECL/GETCO/ DGVCL/MGVCL / UGVCL / PGVCL. 12 of 23

13 GENERAL CONDITION OF CONTRACT 1. WAGES TO BE PAID & TIME OF PAYMENT ETC. BY THE CONTRACTOR: (a) (b) The contractors shall pay minimum rates fixed under the minimum wages act. The wages of every contract labour employed by him under this contract shall be paid by him before the expiry of 7th day of the last day of the month in respect of which the wages are payable (i.e. wages of a month have to the paid by him in the first week of the next month). The payment shall be disbursed in the presence of management representative during the working hours in factory premises and the contractor shall get the entries certified in the register of wages by the representatives of the company. Any default will result in cancellation of contract forthwith or also the contract shall be punishable to the extent of Rs. 100/- fine per each day. The contractor shall be give his telephone number and address to the Board so that in case of labour trouble etc. the contractor can be contacted. The contractor shall arrange to have his office outside the factory premises and the contractor shall keep himself present through out the work hours. 2. LABOURS LAWS: (a) (b) (c) (d) Person below the age of 18 years shall not be employed for the work. No female worker shall be employed in the night shift between PM to AM. Contractor shall maintain a valid labour license under the contractor labour (Regulation and Abolition) Act for the employing necessary manpower to be required by him in the absence of such license the contractor shall be liable to terminated without assign any reasons thereof. The contractor shall at his own expense comply with all labour laws and keep the Board indemnified in respect thereof. Some of the major liabilities under various labour and industrial laws which the contractor shall comply with are as under: 1. Payment of contributing of way of Employer s contribution towards provident fund, family pension scheme, deposit linked insurance scheme, administrative charges etc. at the rates made applicable from time to time by Government of Gujarat/ Government of India or other Statutory Authorities. 2. Payment of deposit in respect of each contract labour at rate of Rs. 30/- with the office of Commissioner of Labour as per contract labour (Regulation and Abolition) Act. 3. License as prescribed under the contract labour (Regulation and Abolition) Act and rules framed there under depending upon the number of workman employed by the contractor License is compulsory it ten or more labours engaged due date. 4. Identity cards as prescribed under the factories act. With photo affixed there to the same for identification 5. Payment of retrenchment compensation, notice pay and other liabilities as per Industrial Disputes Act. Any payment to the contractor s employees arising out of any claim or disputes under the industrial Disputes Act or any other labour laws. 6. Payment of compensation in case of accidental injury. 7. Provision of crèche if female labour employed is more than 30 numbers. 8. Maternity leave as per the provision of the Maternity Benefit Act. 13 of 23

14 3. PROVIDENT FUND AND FAMILY PENSION SCHEME. The contractor shall submit along with his bill (month wise) a statement regarding deductions against employees provident fund and family pension scheme in respect of each concerned employees. Provident fund and family pension scheme at the rate of 8.33% (or at the rate made applicable by the Government from time to time) of Wages. The contractor s contribution and his workers contribution towards provident fund and family pension scheme shall be deposited by the contractor with Regional Provident Fund commissioner, Ahmedabad. 4. DEPOSIT LINKED INSURANCE SCHEME: The contractor shall have to deposit 1/2 % of the wages in respect of employees who is a member of the provident fund as the contribution to the Deposit linked insurance scheme with Regional Provident Fund Commissioner, Ahmedabad. 5. ADMINISTRATIVE CHARGES: Administrative charges for maintaining Provident fund account shall be deposited by the contractor with Regional Provident Fund Commissioner, Ahmedabad at the rates applicable. 6. PAID LEAVE FACILITY: Paid leave facility at the rate of one day for every 29 days worked by the contractor labour shall be provided by the contractor to his workers. He shall maintain leave records/leave cards for individual labourers which shall be duly verified and approved certified by the authorized officer of the Board. 7. WORKMEN S COMPENSATION FUND AND EMPLOYERS LIABILITY INSURANCE: The contractor shall cover all his employees under workmen s compensation fund and under the liability Insurance. 8. The contractor shall employ adequate number of experienced staff at site for daily supervision and for maintenance of various registers and records required under the law and contract no payment for supervision shall be admissible. 9. CONTRACTOR TO INDEMINITY THE BOND: The contractor shall indemnity and keep indemnified the Bond and every member, officer and employees of the G.S.E.C.L. also Engineer in charge and his staff against action proceeding claims, demands, costs and expenses whatsoever arising, out of or in connection with the maters referred in above clauses and elsewhere and against all actions claims, demands, cost and expenses which may be made against the G.S.E.C.L. by any workmen / employees of the contractor or any sub contractor and/ or contractor from any liability any wise any workman employees of the contractor or sub contractor under any laws rules or regulation having the force of low including but not limited to claims against the owner workmen compensation Act The employees Provident Fund 1952, and or/ the Contract labour (Abolition and Regulation) Act the G.S.E.C.L. shall not be liable for in respect of or in consequence of any accident or injury to workman of other person in the employment of the contractor or his sub contractor and the contractor shall identify workman in the G.S.E.C.L. against all such damage and compensation and against all claims, demands, proceeding costs charge and expenses what so ever in respect there of or in relation there to. 14 of 23

15 10. WORKMAN S COMPENSATION & EMPLOYER S LIABILITY INSURANCE: Insurance shall be affected for all the contractor s employees engaged in the performance of these contractors. If any of the work is subjected, the contractor shall require the sub contractor to provide workman s compensation and Employers Liability Insurance for the letter s employees are covered under this scheme. 11. The Company reserves the right to terminate this rate contract at any time during contract period without giving notice of termination of any reasons thereof. 12. The Company will be entitled to deduct directly from the bills, to be paid to the contractor any sum of sums payable by the contractor and which sum/sums the GSECL is required to pay as a principal employer on account of Contractor default in respect of all liabilities referred to in above clauses. 13. Nothing in the contract document stated shall anywise constitutes any workman/ employees of the contractor or any sub contractor as or to be workman employees of the owner or place obligationary liability in respect of any such workman/ employee upon the GSECL. 14. Office Correspondence will be carried out in English and if at any time to facilitate the contractor, Gujarati Translation may be furnished if deemed fit the English version will be the contract one the same only will held good for legal matter. 15. Contractor will be responsible and liable to pay difference in wages if any and or observe the revised service conditions that may be awarded by the honorable Industrial Tribunal effective from the dated directed in the award. 16. Rates quoted are firm and hence no price escalation or labour escalation will be applicable towards execution of work. 17. In case of delay in execution of work the penalty as Cl. No. 3 of Tender and contract for work will be applicable. 18. Party shall have to provide at their own the required personal protective equipments of standard make (ISI approved) to their staff during work execution and it will be your responsibility to see that the same are by your staff while at work. 19. The contractor shall deposit 15 days salary at the rate of last drawn salary for every completed one year services for each worker for liabilities of gratuity. SECTION: GENERAL CONDITIONS OF CONTRACT 1. The contractor shall at their own expense make all necessary provision for housing water supply and sanitary arrangement for their employee as well as for works and shall pay direct to the authorities concerned all rates and taxes. 2. The contractor shall make their own arrangements for the necessary approach road, for transport of their materials and be responsible for the Compensation on account of damage to crop on Corporation s property. 3. All the royalty charges octroi other duties will be paid by the contractor and no extra could be claimed on this account. 4. The organization will supply articles at the place and rates mentioned in schedule `A of Tender form. In case of the materials issued either through or with the recommendation of this organization it will be absolutely necessary for the contractor to maintain a correct and honest record of the daily consumption of the said materials/with inside particular reference to the work during the day. 15 of 23

16 The Engineer-in-charge of this department or his authorized agent shall have the right to inspect and check the stores containing these materials and the account for these materials shall be presented for inspection whenever asked for by them. Every facility shall be afforded by the contractors for all these inspections Engineer-in-charge will supply the materials in any quantity as deemed fit. 5. Godown or sheds hired or constructed for storage of controlled materials and more/ particularly of cement shall be such as would prevent the materials from getting damages in any way. 6. It will be absolutely incumbent the contractors to have on the site of work only such of the materials as have been dully passed by the Engineer-in-charge Materials that have been rejected must on no account be allowed to remain on the side and in spite of written order to do so any such rejected material is on the site beyond a period of 48 hours, notice the Engineer-in-charge shall have the right to remove it at the risk and cost of the contractor and even destroy it. 7. It must be distinctly understood that the conditions of the contract and of claims in respect of extra work will not be allowed, unless the works to which they relate is clearly without the spirit and meaning of the specifications or unless such work are ordered in writing by the Engineer-in-charge and claimed for in specified manner. 8. On completion of the work, the site shall be cleared by the contractors within the stipulated period, and ground brought to original state and they shall not be entitled for any extra claim on this account. 9. General specification of the latest edition of the P.W.D. Hand Book volume I & II shall also apply. 10. When cement is obtained through or with the recommendation or issued by the Corporation it should be understood that the contractors will have to be very careful regarding the handling of the cement bag so as to preserve their serviceability and quality. 11. DAMAGE CAUSES TO WORKS : The work whether fully constructed or not, and all materials, machinery plant tools, temporary building and other things connected there shall be at the risk and in the sole charge of the contractor until the works have been delivered, completed to the Engineer- in-charge and certificate from him to that effect obtained until such delivery the contractor shall at their own cost take all the precautions reasonably necessary to keep all the aforesaid works materials machinery, plant, tools, temporary building and other things connected with the work, free from any loss or damage and in the event to the same or any part there of being lost or damage shall from with within possible speed, reinstate and make good such loss or damage at contractor s own cost. 12. Supply of controlled articles will be invariably recommended after the actual requirements have been carefully scrutinized. In the event of any such materials remaining in surplus in charge of the contract, on account of some modifications either in the design or changes in construction or any other reason will be returned to the department. 13. There will be generally no objection on the component parts of the works being given over to responsible sub contractors but it must be borne in mind that this department would under no circumstances recognize these sub contractors and responsibility of executing the work in accordance with the condition of the contract will entirely rest on the main contractors. The main contractors will therefore always have the very responsible member preferably a technical hand, present on the works with power to sign all work order issued on the site of work and to take requisite actions in the interest of very efficient execution of works. 14. With a view to ensure rapid progress on the works purchaser may store at work sites certain quantities of the materials such as cement etc. and it will be incumbent on the tender to purchase these materials, at the rates mentioned in schedule `A of tender form for supply of necessary articles, all necessary help will be tendered but in must be clearly understood 16 of 23

17 that the purchases does not accepted and responsibility for the delay that may be cause in their supply on account of circumstances beyond the purchaser s control. 15. The Engineer-in-charge will fix the hours of work and no work shall be executed beyond that period during night time or in absence of the Engineer-in-charge or his authorized agent. The box measures shall be filled only in the presence of the Engineer-in-charge or his authorized agent. 16. Contractor will be asked to present the sample of materials and the approved sampled will be preserved at the site of work and no change in the approved sample will be allowed without the written permission of the Engineer-in-charge. 17. If any work is not executed according to the specifications and the directions of the Engineer-in-charge the same will be rejected or reduced rate will be allowed as deemed fit by the Engineer-in-charge. 18. Contract will have to communicate the name of his authorized agent who shall be presentation the works and shall be authorized to sign the materials requisitions receive instruction given verbally, or on the order book on behalf of the contractor. 19. The materials issued to the contractor as per schedule `A of the tender shall not be removed from the work and all surplus material at the end of the works which is considered serviceable shall be returned to the organization even the unserviceable material shall be removed only with the prior permission to the E.E. in writing. 20. The contractor will have to sign the conditions of the contract and execute the agreement, send the list of previous works executed solvency certificates and pay up the security deposits, failing to that the tender will be rejected and earnest money deposit will be forfeited. The value of the stamp paper and stamp duty charges shall be borne by the contactor. 21. The contractor must arrange for all transport of materials weighting of material issued at department stores and all such cost include in the rates of schedule `B with the loss or above percentage quoted by the contractor for finished work. 22. The competent authorities can delete to any items in the schedule `B of the tender order if they fill that the items is not essential to be executed. 23. A schedule of quantities is included in the tender document it shall definitely understood that the Corporation does not accept any responsibility for the correctness or complication of this schedules and this schedule is liable to alterations by commissions, deduction or additions at the description of the Chief Engineer of as set forth in conditions of contract specific percentage less or above shall be quoted by the contractor below the total amount of schedule B. The tender documents shall be written legibly and free from grouser, over written on conversion of figures correction where unavoidable shall be made by crossing out initialing dating and rewriting both in figures and in words in case of my discrepancy in figures the price quoted in words shall prevail. 24. This notice to tenders shall form a part of the contract. 25. The entire work is to be completed within the stipulated time limit from the date of work order. The contractor will not be eligible for any extra for the idle period of work or waiting period that may be required to suit other considerations and no claim for compensation on account of such will be considered. However in case or delay due to circumstances beyond the control contractor either in date of commencement or due to waiting during construction extension time may be considered for completion of work. 26. In case contractor is unable to account for full quantity of materials issued to him from the department stores, recovery will be effected from him at cost rates or market rates prevailing at the time of issue whichever is higher, plus 15% to cover Corporation s departmental supervision charges for all material unaccounted for. 17 of 23

18 27. Scrap from reinforcement (bars below 1.25 M lengths) not be accepted back and the contractor will be authorized to remove it from the site after completion of works and rendering of accounts with written permission of Engineer in charge not below the rank of Executive Engineer. The corporation will not be responsible for any delay in supply of controlled materials such as M.S. Reinforcement Bars cement etc. however it will hand over to see that there in no delay of materials. Due consideration will be given in granting extension of time for completion of the work if found necessary on account of delay supply of materials. No claim for compensation or for damages for extension in time shall be entertained in this account. All materials inquired by the contractor shall be drawn from the stores by requisition given in writing by the contractor at least one week before the requirement of work. The recoveries will be affected in running payment for all material issued up to the date of measurements for the particular bill or the quantities used in the works measured at the description of the Executive Engineer in charge of work. 28. The contractor shall keep one full time qualified engineer at site who shall be fully authorized to receive and comply with such instructions as given by the Executive Engineer. The names of such Engineer with his qualification and experience shall be intimated by the contractor. The E.E. shall have the right to demand the removal of any technical person. Skilled or unskilled work men who in his opinion are considered to cause bad workmanship in the execution of work or to cause indiscipline. 29. Bill shall be submitted by the contractor monthly on or before the date fixed by the E.E. for all works executed in the previous months. 30. SUPPLY OF WATER AND ELECTRICITY: If possible water for work purpose only may be supplied by the Corporation at one point as decided by the Engineer & recovery for water charges shall be affected at two percent of cost of time as executed in which the water supplied by the Corporation is used as certified by the Engineer in charge. Electric supply is required the contractor shall be given Free of cost by GSECL. 31. Should this tender be accepted I/We have agreed to abide by and full fill all the terms and provision of `Tender and Contract of works as applicable and in default there to forfeit and pay to the Corporation the some of money due. 32. The work will have to be carried out in co ordination with other Agencies on the same site on account of this in case the contractor has to stop or delay his works for same time he will not claim anything extra only Corporation may consider to give suitable extension in time limit if necessary on such account. 33. Any disputes arising out of the contract if not settled mutually, than the same shall be settle by Gujarat Public Work Arbitration Tribunal act Note: - Following clauses are not applicable to this contract. i.e. 2,3,4,6,9,10,12,14,16 & of 23

19 CIRCULAR-1 The following are the major obligations to be fulfilled by the Contractors as per the Contract Labour (R&A) Act 1970 and rules mentioned there under. 1. License to be obtained before starting the work where number of contract labours in ten or more. 2. Payment to contract labourers has to be made in presence of IRO/LWO. Wages rates for contract labourers are applicable as per the terms and a condition of the license. Minimum rate of the wages for unskilled labour, semiskilled labour and for skilled labour notified from time to time by the competent authority under the said Act. 3. Every contractor shall have to maintain the muster roll and wedges register in respect of his contract labours. 4. Every contractor is required to issue employment card to their labours. 5. The Contractor has to maintain the register No 13 containing the details of contract labours employed by him. 6. Earned leave / card as per factory Act and rules. 7. Other registers required under Contract Labour rules and the Factory Act & rules. 8. Every Contractor shall have to obtain Insurance Policy in respect of the contract labours engaged by him to cover them under Workmen s Compensation Act. 9. To send half yearly return to licensing officer as per rule-82 (1) as per schedule time. 10. Before starting the work as per contract awarded to him, he should make arrangement to enter in to agreement in the prescribe format on the stamp paper as applicable. Before fulfilling the above requirement the contractor is instructed not to start the work. The responsibility will be on his head in case he fails. 11. Contractor should posses separate P.F. code on their Firm name otherwise their offer may not be considered. All the contractors are informed to adhere to the rules and regulations applicable to them, particularly in respect of the labours engaged by them. The contractor not fulfilling the obligations will not be allowed or continue with work / not be held qualified to carry out the work at Wanakbori TPS. 19 of 23

20 General Safety Rules / norms To Be Observed By the Contractors. - Safety measures regarding fatal accident in the project All the contractors working at Thermal Power Station for Project Erection testing, commissioning shall strictly observe the following Safety Rules. Concerned Contractors are responsible for informing & observance of these rules by their supervisors/employees/ labours as well as the supervisors/ employees/ labours of agencies/ sub-contractors engaged, if any, by them for the work contract awarded to them. Prior to commencement of the work, Contractor shall submit a written assurance on their letterhead to the concerned Sectional Head / Engineer-in-charge that they have thoroughly gone through these Rules, have educated their employees / employees of their sub contractor and will strictly observe the said Rules while execution of work under work contract awarded to them. They shall indemnify the Corporation for any loss or damage / accident / injury to the Corporation s property / employee or employee of their own in default due to non - observing these rules. 1. Persons to be employed for carrying out the work shall possess required qualification, are fully trained and conversant for the works to be done. All persons should have gate pass. Register consisting the full details i.e. address, phone number nearest relative,.. of all persons to be maintained. During the work execution, one trained & competent supervisor shall always remain present at site. 2. The contractor shall take all the required safety measures prior to commencement of work on dangerous substances, machineries or area at which cautionary notice is displayed and obtain `Line Clear` or `Work Permit` through the concerned Department / Section. 3. Prior to carrying out welding, gas cutting, furnace heating or any other hot work job, remove all the inflammable material lying at or nearby worksite or cover it properly by suitable protective covering. Also, special care shall be taken before carrying out such job & see that all possible contributing factors to set fire shall be removed / vanished prior to commencement of the work. Advance intimation shall be given to concerned section / Fire Section to commence the work in fire prone areas. They should also keep ready all the First Aid & Fire Extinguishers / equipments & fire extinguishing media / material like sand / water buckets or other appropriate equipment at such place. 4. While carrying out work in confined space or inside vessel, obtain necessary `Confined Space / Vessel Entry Permit` from concerned department prior to commencement of the work. For lighting in such areas, only 24-volt (ISI certified & with proper guard) hand lamp shall be used. For taking care of the persons working inside the confined space / vessel, a supervisor / person capable to keep continuous watch on person(s) working inside, assist them incase of emergency or arrange to get immediate outside help, shall remain present at entry point. (Use full body safety belt without failed.) While working inside sewage, trench or at-depth, a person to warn outsiders / entrants / passers etc shall remain available near entry point or the entry point shall be cordoned by a barricade tape with a cautionary notice. After completion of the works, all the lids / covers / grills / grits opened, shall be refixed / re-placed in the original position as it were prior to commencement of the work and leave the work place in safe condition in all respect, so as to prevent accident to fellow workers. 5. Do not work on or block (by stacking material, spare parts, tools-tackles, equipments etc), any passages / walkways / gangways / aisles / staircases / ladders / lifts or any other approaches / roads leading to plans or its auxiliaries, on which there is traffic movement or possible traffic movement in case of emergency. Such passages are meant for safe escape in the event of emergency. If it is utmost necessary to carry out work in such area with blocking of passage, prior permission of Competent Authority or the Engineer-In-Charge shall be obtained. To demarcate / declare the area as UNSAFE, cordon it using barricading tape & display suitable caution notice or keep a person to restrict / divert the traffic on this route through other safe passage. 6. Prior to use of power / electrically operated hand tools / equipments / machines / gadgets like welding machine, hand grinder, hand drill etc, ensure for its safe operation & use it only if it is found safe to use. Do not use defective, unsafe or improperly maintained equipments. The electrical power supply required to run such equipments shall not be taken directly at their own but shall be obtained through concerned Electrical Maintenance Departments or their authorized persons or under their observations / guidance only. The Electrical Section shall provide temporary electrical connection up to contractor s Mains Board on which it is compulsory to install mains switch, ELCB & fuses of adequate capacity. All such equipments shall invariably be earthed adequately to prevent electrical shock, sparking, short circuit etc. Power cord to be used shall be of adequate capacity, without any joint & shall consist of earth wire also. Hence, it is necessary to use adequate capacity 3-wire power 20 of 23