Type Approval Certificate

Transcription

1 Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd s Register Type Approval System. This certificate is issued to: PRODUCER DESCRIPTION Phoenix Contact GmbH & Co. KG Flachsmarkstraße Blomberg Push-in Terminal Blocks and Push-in Test Disconnect Terminal Blocks TYPES Push-in Terminal Blocks: PT 1,5/S-MTD PT 1,5/S-TWIN-MTD PT 2,5-PE/3L PTT 1,5/S-2L PT 1,5/S-QUATTRO-MTD PT 4-PE/3L PTT 1,5/S-2TG Push-in Test Disconnect Terminal Blocks PT 1,5/S-MT PT 1,5/S-TG PT 1,5/S-QUATTRO-MT PT 1,5/S-QUATTRO-TG PT 1,5/S-TWIN-MT PT 1,5/S-TWIN-TG PTT 1,5/S-2MT PTT 1,5/S-L/MT PTT 1,5/S-L/TG PTT 2,5-2MT PTT 2,5-2TG PTTBS 2,5-2MTB PTTBS 2,5-2TGB APPLICATION ADDITIONAL TEST Marine, offshore and industrial application for use in environmental categories ENV1, ENV2, ENV3 and ENV4 as defined in Lloyd s Register s Type Approval System, Test Specification Number 1, 2015 Low temperature (-65 C / 24 hours) Certificate No. 16/20026 Issue Date 15 March 2016 Expiry Date 14 March 2021 Sheet 1 of 3 71 Fenchurch Street, London EC3M 4BS Is a subsidiary of Lloyd's Register Group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

2 STANDARD IEC : 2009 RATINGS Type Conductor Size (mm²) Current (A) Voltage (V) PT 1,5/S-MTD PT 1,5/S-TWIN-MTD PT 1,5/S-QUATTRO-MTD PT 2,5-PE/3L PT 4-PE/3L PTT 1,5/S-2L PTT 1,5/S-2TG PT 1,5/S-MT PT 1,5/S-TG PT 1,5/S-QUATTRO-MT PT 1,5/S-QUATTRO-TG PT 1,5/S-TWIN-MT PT 1,5/S-TWIN-TG PTT 1,5/S-2MT PTT 1,5/S-L/MT PTT 1,5/S-L/TG PTT 2,5-2MT PTT 2,5-2TG PTTBS 2,5-2MTB PTTBS 2,5-2TGB PLACE OF Phoenix Contact Wielkopolska Spolka z.o.o PRODUCTION U1. Celna Nowy Tomysl Polen Certificate No. 16/20026 Issue Date 15 March 2016 Expiry Date 14 March 2021 Sheet 2 of 3 71 Fenchurch Street, London EC3M 4BS Is a subsidiary of Lloyd's Register Group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

3 The Type Approval does not eliminate the need for normal inspection and survey procedures required by the Rules and Regulations. If the specified standards are amended during the validity of this certificate, the product is to be re-approved prior to it being supplied to vessels to which the amended standards apply. The Design Appraisal Document No. HTS/ETS and its supplementary Type Approval Terms and Conditions form part of this Certificate. Certificate No. 16/20026 Issue Date 15 March 2016 Expiry Date 14 March 2021 Sheet 3 of 3 71 Fenchurch Street, London EC3M 4BS Is a subsidiary of Lloyd's Register Group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

4 Document no: HTS/ETS Issue number 0 Page 1 of 3 Marine Design Appraisal Document Date 15 March 2016 Am Sandtorkai Hamburg Please quote this reference number on all future communications Telephone +49 (0) Fax +49 (0) HPC / /TW/MK/FS hamburg-technical-support@lr.org THE LLOYD S REGISTER S TYPE APPROVAL SYSTEM, 2014 ISSUED TO: PHOENIX CONTACT GMBH & CO.KG FOR: PUSH-IN TERMINAL BLOCKS AND PUSH-IN TEST DISCONNECT TERMINAL BLOCKS TYPE APPROVAL CERTIFICATE NO. 16/20026 The undernoted documents have been reviewed for compliance with the requirements of the Lloyd s Register s Type Approval System, 2014 and this Design Appraisal Document forms part of the Certificate. APPROVAL DOCUMENTATION Form 2502TA Request for Marine Services Type Approval Form 2571 Application for Type Approval KAT Inspection and Surveillance of Production ETS from Phoenix Contact: Conformity of equality regarding terminals and material of housing DRAWINGS PT1,5/S-TWIN-MT PT 1,5/S-TWIN-TG PT 1,5/S-TWIN-MTD PT 1,5/S-MT PT 1,5/S-TG PT 1,5/S-MTD PT 1,5/S-QUATTRO-MT PT 1,5/S-QUATTRO-TG PT 1,5/S-QUATTRO-MTD PTT 1,5/S-2L PTT 1,5/S-MT PTT 2,5/S-2TG PTT 1,5/S-L-MT PTT 1,5/S-L-TG FINAL ACCEPTANCE OF ACTUAL ITEM(S) DEPEND(S) ON SATISFACTORY SURVEY AND TESTING Is a member of Lloyd s Register group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Form 6438MARREF ( )

5 Date 15 March 2016 Am Sandtorkai 41 Document no: HTS/ETS Issue number 0 Page 2 of Hamburg Please quote this reference number on all future communications Telephone +49 (0) Fax +49 (0) hamburg-technical-support@lr.org HPC / /TW/MK/FS DRAWINGS (CONTINUED) PTT 2,5-2MT PTT 2,5-2TG PTTBS 2,5-2MTB PTTBS 2,5-2TGB PT 2,5-PE/3L PT 4-PE/3L TEST REPORTS DE Type Test Report PTTBS 2,5-2MTB DE Type Test Report PTTBS 2,5-2TGB with P-DI DE Type Test Report PTTBS 2,5-2TGB with P-CO DE Type Test Report PTT 2,5-2MT DE Type Test Report PTT 2,5-2TG with P-DI D Type Test Report PT 1,5/S-MTD D Type Test Report PT 1,5/S-TWIN-MTD D Type Test Report PT 1,5/S-QUATTRO-MTD D Type Test Report PT 1,5/S-MT D Type Test Report PT 1,5/S-TG with P-FIX-3, D Type Test Report PT 1,5/S-QUATTRO-MT D Type Test Report PT 1,5/S-TWIN-MT D Type Test Report PT 1,5/S-2MT D Type Test Report PTT 1,5/S-2L and PTT 1,5/S-2L D Type Test Report PT 1,5/S-QUATTRO-TG with P-FIX-3, D Type Test Report PT 1,5/S-TWIN-TG with P-FIX-3, D Type Test Report PTT 1,5/S-L/MT and PTT 1,5/S-L/TG EN Type Test Report PT 2,5-PE/3L EN Type Test Report PT 4-PE/3L EN Test Report PT 1,5/S-MT and PT 1,5/S-TG EN Test Report PT 1,5/S-MTD EN Test Report PT 1,5/S-QUATTRO-MT and PT 1,5/S-QUATTRO-TG ; PT 1,5/S-TWIN-MT and PT 1,5/S-TWIN-TG EN Test Report PT 1,5/S-QUATTRO-MTD and PT 1,5/S-TWIN -MTD EN Test Report PTT 1,5/S-2MT ; PTT 1,5/S-2TG ; PTT 1,5/S-L/MT ; PTT 1,5/S-L/TG ; PTT 1,5/S-2L EN Test Report PTT 2,5-2MT and PTT 2,5-2TG EN Test Report PTTBS 2,5-2MTB and PTTBS 2,5-2TGB EN Test Report PT 2,5-PE/3L EN Test Report PT 4-PE/3L FINAL ACCEPTANCE OF ACTUAL ITEM(S) DEPEND(S) ON SATISFACTORY SURVEY AND TESTING Is a member of Lloyd s Register group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Form 6438MARREF ( )

6 Date 15 March 2016 Am Sandtorkai 41 Document no: HTS/ETS Issue number 0 Page 3 of Hamburg Please quote this reference number on all future communications Telephone +49 (0) Fax +49 (0) hamburg-technical-support@lr.org HPC / /TW/MK/FS Senior Surveyor T +49 (0) E thorsten.wolff@lr.org Supplementary Type Approval Terms and Conditions Type Approval certifies that a representative sample of the product(s) referred to herein has/have been found to meet the applicable design criteria for the use specified herein. It does not mean or imply approval for any other use, nor approval of any product(s) designed or manufactured otherwise than in strict conformity with the said representative sample. Type Approval is based on the understanding that the manufacturer s recommendations and instructions and any relevant requirements of the Rules and Regulations are complied with. Type Approval does not eliminate the need for normal inspection and survey procedures required by the Rules and Regulations. reserves the right to cancel or withdraw this Type Approval Certificate in accordance with the LR Type Approval System Procedure. FINAL ACCEPTANCE OF ACTUAL ITEM(S) DEPEND(S) ON SATISFACTORY SURVEY AND TESTING Is a member of Lloyd s Register group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Form 6438MARREF ( )

7 Part 2 Terminals / Insulators Rating Producer/ Licence No. Phoenix Contact GmbH & Co. KG Flachsmarkstraße Blomberg Germany Type Push-in terminal blocks and Push-in test disconnect terminal blocks Standard Voltage Continuous Current Amperes Maximum Conductor Size mm 2 AWG Category/ Additional Tests ENV1, ENV2, ENV3 ENV4 (2015) Remarks Cert. No. Expiry date: 14 March /20026 Push-in terminal blocks IEC :2009 PT 1,5/S-MTD ,5 1, C / 24hrs Mounting on NS35 DIN rail PT 1,5/S-TWIN-MTD ,5 1,5 14 (DIN EN 60715: ) PT 1,5/S-QUATTRO-MTD ,5 1,5 14 PT 2,5-PE/3L ,5 12 PT 4-PE/3L PTT 1,5/S-2L ,5 14 PTT 1,5/S-2TG ,5 14 Push-in test disconnect IEC :2009 terminal blocks PT 1,5/S-MT ,5 14 PT 1,5/S-TG ,5 14 PT 1,5/S-QUATTRO-MT ,5 14 PT 1,5/S-QUATTRO-TG ,5 14 PT 1,5/S-TWIN-MT ,5 14 PT 1,5/S-TWIN-TG ,5 14 PTT 1,5/S-2MT ,5 14 PTT 1,5/S-L/MT ,5 14 PTT 1,5/S-L/TG ,5 14 PTT 2,5-2MT ,5 12 PTT 2,5-2TG with P-DI ,5 12 PTTBS 2,5-2MTB ,5 12 PTTBS 2,5-2TGB with P-DI ,5 12 PTTBS 2,5-2TGB with P-Fix ,5 12 1