Company Certificates. Licence to Operate

Transcription

1 Company Certificates Licence to Operate

2 Company Certificates Expire date Certificate name Certified and audited by 26-Okt-2021 ASME U stamp [NB] National Board 26-Okt-2021 ASME R stamp [NB] National Board 26-Okt-2021 National Board ASME U National Board 31-Dec-2021 ISO 9001:2015 Lloyds Register Nederland 7-Aug-2021 SCC VCA :2008 Lloyds Register Nederland 29-May-2020 ISO 14001:2015 Lloyds Register Nederland 19-June-2019 PED module H1 acc. 2014/68/EU TÜV Rheinland 09-Aug-2023 ISO Lloyds Register Nederland 25-Okt April Sep June-2020 Fachbetrieb nach Wasserhaushaltgesetz Fachbetrieb nach DVGW G493-1 Manufacturer and welding shop acc. AD 2000 Merkblatt Hp0 and DIN EN ISO System zur Übertragung der Kennzeichnung von Werkstoffen TÜV Rheinland DVGW Cert GmbH TÜV Rheinland TÜV Rheinland 17-June-2020 EN 1090 Lloyds Register Nederland 21-Sep-2021 ТR CU 012/2011 Atex ТR CU 032/2011 PED TR CU 010/2011 Machine safety TR CU 020/2011 EMC SGS Revisie Datum : 9 : Pagina 2 van 2

3 Certifications Petrogas is qualified to a wide array of international standards, which enables us to work for clients worldwide. ISO 9001:2015 Petrogas drives constant and continuous improvement in the design, engineering, procurement, manufacturing and erection and commissioning of our systems. ISO9001:2015 is the framework we have adopted to support processes. ISO 14001:2015 Our environment is extremely important to us, therefore we try to reduce waste and minimize the consumption of recourses through implementation and certification of an effective management system compliant with ISO 14001:2015. ISO Welding is a key process within our organization. To make sure we meet our customer requirements for fusion welding of metallic materials in our workshop on field installation sites, Petrogas is certified in accordance with the ISO :2005. The product standards are ASME, AD2000, EN 13445, EN 13480, RTOD(2005) and customer specific requirements. Our skids meet the requirements of EN :2009/A1:2011. Welding certifications International Welding Engineer IWE (EN14731) International Welding Technologist IWT (EN14731) Interpretation of Radiographs (EN473 + ASNT-SNT-TC-1A) Radiographic Testing (EN473 + ASNT-SNT-TC-1A). ASME American Society of Mechanical Engineers. For high quality and safety of your Pressure Vessels and Heaters Petrogas acquired U-stamp and R-Stamp certification for the shop construction of pressure vessels and parts in accordance with the ASME Boiler and Pressure Vessel Code Section VIII, Division 1. And for Shop and field Repair and Alteration to pressure retaining items in accordance with the National Board Inspection Code. Pressure Equipment Directive (PED) Petrogas operates a quality system according to the European Directive 2014/68/EU. And have the permission to affix the CE marking to pressure equipment which are covered by module H and H1. This ensures high quality for piping and welding activities. VCA* Petrogas works with trained and skilled workforce, safety is our first priority. Petrogas has been assessed and approved in accordance with the standard: SHE Checklist Contractors (SCC) rev 2008/5.1. Local governances: TRCU, GOST, DPEM, etc. Petrogas also designs and builds installations that meet local rules and requirements.

4 CERTIFICATE OF AUTHORIZATION u ol- o.= C') E IJJ - (tr.9 E(tr e - () (1) The named company is authorized by the American Society of Mechanical Engineers (ASME) for the scope of activity shown below in accordance with the applicable rules of the ASME Boiler and Pressure Vessel Code. The use of the certification mark and the authority granted by this Certificate of Authorization are subject to the provisions of the agreement set forth in the application. Any construction stamped with this certification mark shall have been built strictly in accordance with the provisions of the ASME Boiler and Pressure Vessel Code. COMPANY: SCOPE: Petrogas Gas - Systems B.V. Steenoven 13 Eindhoven 5626 DK The Netherlands Manufacture of pressure vessels at the above location only =l+r o +,.!P o (t, E (tr C) II L (1) E (l) e -F AUTHORIZED: EXPIRES: CERTIFICATE NUMBER September 5, 2018 October 26, ,151 Board Chair, Conformity Assessment Managing Director, Conformity Assessment

5 Certificate of Authorization This is to certify that Petrogas Gas - Systems B.V. Steenoven 13 Eindhoven 5626 DK The Netherlands is authorized to use the R Symbol in accordance with the provisions of the National Board Inspection Code and NB-415, Accreditation of "R" Repair Organizations. All activities within the scope of this Authorization shall be controlled by the above location. The scope of this Authorization is limited to: Metallic Repairs and Alterations At Shop and Field Locations Certification Number: 9170 Issue Date: Expiration Date: September 10, 2018 October 26, 2021 Executive Director

6

7 Certificate of Approval This is to certify that the Management System of: Petrogas Gas-Systems B.V. Steenoven 11-13, 5626 DK Eindhoven, Netherlands has been approved by LRQA to the following standards: ISO 9001:2015 P.G. Cornelissen - Area Manager North Europe Issued by: Lloyd's Register Nederland B.V. Current issue date: 1 January 2019 Expiry date: 31 December 2021 Certificate identity number: Original approval(s): ISO April 2014 Approval number(s): ISO The scope of this approval is applicable to: Design, engineering, procurement, production, project- and construction management, commissioning and turnkey delivery of Gas-, oil- and energy systems. Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Nederland B.V., K.P. van der Mandelelaan 41a 3062MB Rotterdam Netherlands Page 1 of 1

8 Certificate of Approval This is to certify that the Management System of: Petrogas Gas-Systems B.V. Steenoven 11-13, 5626 DK Eindhoven, Netherlands has been approved by LRQA to the following standards: ISO 14001:2015 P.G. Cornelissen - Area Manager North Europe Issued by: Lloyd's Register Nederland B.V. Current issue date: 20 July 2018 Original approval(s): Expiry date: 29 May 2020 Certificate identity number: ISO May 2011 Approval number(s): ISO The scope of this approval is applicable to: Design, engineering, procurement, project, manufacturing and construction management, commissioning and turn key delivery of gas-, oil- and energy systems. Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Nederland B.V., K.P. van der Mandelelaan 41a 3062MB Rotterdam Netherlands Page 1 of 1

9 Certificate of Approval This is to certify that the Safety Assurance System of: Petrogas Gas-Systems B.V. Steenoven 11-13, 5626 DK Eindhoven, Netherlands has been approved by LRQA to the following standards: VGM Checklist Aannemers (VCA*) Rev. 2008/5.1. P.G. Cornelissen - Area Manager North Europe Issued by: Lloyd's Register Nederland B.V. Original approval(s): 8 August 2012 Current issue date: 8 August 2018 Expiry date: 7 August 2021 Certificate number: Nace Code: B0910 The scope of this approval is applicable to: Erection, Commissioning and Service of gas- oil and energy systems. Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as ' Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Nederland B.V., K.P. van der Mandelelaan 41a 3062MB Rotterdam Netherlands Page 1 of 1

10

11

12 Certificate of Approval Lloyd s Register Quality Assurance hereby certifies that the company: Petrogas Gas-Systems B.V. Steenoven 11, 5626 DK Eindhoven, Nederland has furnished proof to fulfil the quality requirements for welding according to: ISO :2005 in the extent mentioned on the schedule of this certificate. P.G. Cornelissen - Area Manager North Europe Issued by: Lloyd's Register Nederland B.V. This certificate is valid only in association with the certificate schedule bearing the same number. Current issue date: 10 August 2018 Original approval date: 17 April 2014 Expiry date: 9 August 2023 Certificate number: Approval number(s): Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense cause d by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or lia bility is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Nederland B.V., K.P. van der Mandelelaan 41a 3062MB Rotterdam Netherlands Page 1 of 2

13 Certificate Schedule Certificate number: ISO Scope of Activity Type of products Product standards Gas, oil and energy installations ASME, AD 2000, EN 13445, EN 13480, RToD (2005), customer specific requirements. Parent material groups Welding and allied processes (ISO/TR 15608) (ISO 4063) 1 / 3 / 8 / 10 / 11 / 43, 45 & , 121, 123, 141, 135, 136 Responsible welding co-ordinator Name Qualification A. Kemner IWT (Diploma no. NL IWT C-011) Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless tha t person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that c ase any responsibility or liability is exclusively on the terms and conditions set out in that contract. Issued by: Lloyd's Register Nederland B.V., K.P. van der Mandelelaan 41a 3062MB Rotterdam Netherlands Page 2 of 2

14

15

16

17

18

19

20

21

22

23

24

25

26