DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE

Transcription

1 DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE Certificato No. / Certificate No AHSO-ITA-SINCERT Si attesta che / This is to certify that è conforme ai requisiti della norma per i sistemi di gestione: has been found to conform to the management system standard: BS OHSAS (Occupational Health and Safety Assessment Series) 18001:2007 Valutato secondo le prescrizioni del Regolamento Tecnico RT-12 Evaluated according to the requirements of Technical Regulations RT-12 Questa Certificazione è valida per il seguente campo applicativo: This Certificate is valid for the following product or service ranges: Progettazione e costruzione di edifici industriali, fondazioni speciali in cemento armato e rivestimenti refrattari per forni e caldaie. Montaggi meccanici (Settore EA : 28-17) Design and construction of industrial buildings, special reinforced concrete foundations and furnaces and boilers refractory living. Mechanical erection (Sector EA : 28-17) Data Prima Emissione/Initial Certification Date: Il Certificato è valido fino al: This Certificate is valid until: Luogo e Data/Place and Date: Vimercate (MB), Per l Organismo di Certificazione: For the Certification Body: L audit è stato eseguito sotto la supervisione di/ The audit has been performed under the supervision of Paolo Balladore Lead Auditor Vittore Marangon La validità del presente Certificato è subordinata al rispetto delle condizioni contenute nel Contratto di Certificazione. DNV GL BUSINESS ASSURANCE ITALIA S.R.L. - VIA ENERGY PARK, VIMERCATE (MB) - ITALY TEL

2 DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE Certificato No. / Certificate No. CERT AQ-MIL-SINCERT Si attesta che / This is to certify that Il sistema di gestione per la qualità di / The quality management system of è conforme ai requisiti della norma: has been found to conform to the standard: UNI EN ISO 9001:2008 (ISO 9001:2008) Valutato secondo le prescrizioni del Regolamento Tecnico RT-05 Evaluated according to the requirements of Technical Regulations RT-05 Questa Certificazione è valida per il seguente campo applicativo: This Certificate is valid for the following product or service ranges: Progettazione e costruzione di edifici industriali, fondazioni speciali in cemento armato e rivestimenti refrattari per forni e caldaie. Montaggi meccanici (Settore EA : 28-17) Design and construction of industrial buildings, special foundations of reinforced concrete and refractory linings for furnaces and boilers. Mechanical assembly (Sector EA : 28-17) La presente certificazione si intende riferita agli aspetti gestionali dell impresa nel suo complesso ed è utilizzabile ai fini della qualificazione delle imprese di costruzione ai sensi dell articolo 40 della Legge No. 163 del 12 aprile 2006 e successive modificazioni e del D.P.R. 5 ottobre 2010 No. 207 This certificate is meant to refer to the general management aspects of the organization as a whole and may be used by construction companies for qualification purposes according to Art. 40 of the Law No. 163 dated 12 april 2006 and subsequent modifications as well as D.P.R. 5 October 2010 No. 207 Data Prima Emissione/Initial Certification Date: Il Certificato è valido fino al: This Certificate is valid until: L audit è stato eseguito sotto la supervisione di/ The audit has been performed under the supervision of Alessandro Bernardotti Luogo e Data/Place and Date: Agrate Brianza (MB), Per l Organismo di Certificazione: For the Certification Body: Zeno Beltrami Lead Auditor La validità del presente Certificato è subordinata al rispetto delle condizioni contenute nel Contratto di Certificazione. DET NORSKE VERITAS ITALIA SRL - CENTRO DIREZIONALE COLLEONI - PALAZZO SIRIO V.LE COLLEONI, AGRATE BRIANZA (MB) ITALY TEL

3 DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE Certificato No. / Certificate No AE-ITA-ACCREDIA Si attesta che / This is to certify that è conforme ai requisiti della norma per i sistemi di gestione: has been found to conform to the management system standard: UNI EN ISO 14001:2004 (ISO 14001:2004) Valutato secondo le prescrizioni del Regolamento Tecnico RT-09 Evaluated according to the requirements of Technical Regulations RT-09 Questa Certificazione è valida per il seguente campo applicativo: This Certificate is valid for the following product or service ranges: Progettazione e costruzione di edifici industriali, fondazioni speciali in cemento armato e rivestimenti refrattari per forni e caldaie. Montaggi meccanici (Settore EA : 28-17) Design and construction of industrial buildings, special reinforced concrete foundations and fornaces and boilers refractory living. Mechanical erection (Sector EA : 28-17) Data Prima Emissione/Initial Certification Date: Il Certificato è valido fino al: This Certificate is valid until: Luogo e data/place and Date: Agrate Brianza (MB), Per l Organismo di Certificazione: For the Certification Body: L audit è stato eseguito sotto la supervisione di/ The audit has been performed under the supervision of Federica Klun Lead Auditor Zeno Beltrami La validità del presente Certificato è subordinata al rispetto delle condizioni contenute nel Contratto di Certificazione. DNV GL BUSINESS ASSURANCE ITALIA S.R.L. - CENTRO DIREZIONALE COLLEONI - PALAZZO SIRIO V.LE COLLEONI, AGRATE BRIANZA (MB) ITALY TEL

4 MANAGEMENT SYSTEM CERTIFICATE Certificate No: ASCC-ITA-RvA Initial certification date: 26 November 2015 Valid: 30 June November 2018 This is to certify that the management system of has been found to conform to Management System Standard: SCC** 2008/5.1 This certificate is valid for the following scope: Installation of metallic carpentry for industrial use. Installation of industrial, mechanical, electro-mechanical, piping, structures and related electrical works. NACE : 45.3 / NACE, Rev.2: Place and date: Barendrecht, 30 June 2016 For the issuing office: DNV GL Business Assurance Zwolseweg 1, 2994 LB, Barendrecht, Netherlands D.P. Koek ACCREDITED UNIT: DNV GL Business Assurance B.V., ZWOLSEWEG 1, 2994 LB, BARENDRECHT, NETHERLANDS. TEL: assurance.dnvgl.com

5 Working together for a safer world Lloyd s Register Verification The Management System for: ISO : 2005 Quality Requirements for the Fusion Welding of Metallic Material Comprehensive Quality Requirements In accordance with LRV procedures, it is hereby certified that: Via G.Marconi Dalmine (BG) Italy Applies a quality and welding management system in line with the above standard for the following scope: Product Type: Product Standards: Steel Structures assembly for buildings and industrial plants. Piping and pressure parts assembly for industrial Plants Client Specifications, EN13445, EN Welding and Inspection Standards: EN ISO : A2: 2012, EN ISO : 2013, EN ISO 5817: 2014, Parent Materials: Material Groups 1.1,1,2, 8 as per PD CEN ISO/TR 15608:2013. Welding and Allied Processes: EN ISO 4063: 2010: 136, 141, 111 Responsible Welding Co-ordinator: Mr Amedeo AMADEI International Welding Inspector Certificate Number: LRC /03 Original Approval: 30 November 2015 Current Certificate: 15 March 2017 Expiry Date: 29 November 2020 R.A.Pennycook on behalf of Lloyd s Register Verification Lloyd s Register Verification Limited (Reg. no ) is a limited company registered in England and Wales. Registered office: 71 Fenchurch Street, London, EC3M 4BS, UK. A subsidiary of Lloyd s Register Group Limited. Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.

6 Working together for a safer world Comments Validity of the Certificate This Certificate remains valid provided: There is no change to the Recognised Welding Coordinator. LRV is permitted to perform the annual verification. No modifications occur which affect the validity of the certificate. If such modifications do occur LRV is to be informed immediately by the manufacturer so that a decision on validity of the certificate can be made. Note: If a valid certificate is to be renewed, the renewal must be applied for at least two months before the end of the period of validity of the current certificate. Lloyd s Register Verification Limited (Reg. no ) is a limited company registered in England and Wales. Registered office: 71 Fenchurch Street, London, EC3M 4BS, UK. A subsidiary of Lloyd s Register Group Limited. Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document, which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.