Type Approval Certificate

Transcription

1 Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd s Register Type Approval System. This certificate supersedes certificate number 15/20115 (E1) issued on which is hereby cancelled. This certificate is issued to: PRODUCER DESCRIPTION DEIF A/S Frisenborgvej Skive Denmark Protection and power management unit, generator protection unit, paralleling and protection unit TYPES PPM 300 EIM 3.1 Engine input module GAM 3.1 Governor/AVR module 2.0.x.x (EIM 3.1) Certificate No. 15/20115 (E2) Issue Date 27 April 2017 Expiry Date 08 October 2020 LR Sheet 1 of 3 71 Fenchurch Street, London EC3M 4BS Is a subsidiary of Lloyd's Register Group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

2 TYPES continued GPU 300 PPU 300 EIM 3.1 Engine input module GAM 3.1 Governor/AVR module 2.0.x.x (EIM 3.1) APPLICATION ADDITONAL TEST DESIGN CODE Certificate No. Marine applications for use in environmental categories ENV1, ENV2 and ENV3 as defined in Lloyd s Register s Type Approval System, Test Specification Number 1 July Low temperature (-25C /16 hours) Manufacturer s specification LR Ship Rules (2016) Part 6, Chapter 1 and 2 15/20115 (E2) Issue Date 27 April 2017 Expiry Date 08 October 2020 LR Sheet 2 of 3 71 Fenchurch Street, London EC3M 4BS Is a subsidiary of Lloyd's Register Group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

3 OTHER CONDITIONS Unless an LR software conformity assessment has been carried out for the units the EIM card may provide diesel safety functions as back up only to provide design diversity and an additional short circuit protection independent of PPM 300, GPU 300 resp. PPU 300 is to be provided. The Type Approval does not eliminate the need for normal inspection and survey procedures required by the Rules and Regulations. If the specified standards are amended during the validity of this certificate, the product is to be re-approved prior to it being supplied to vessels to which the amended standards apply. The Design Appraisal Document No. HTS/ETS and its supplementary Type Approval Terms and Conditions form part of this Certificate. Certificate No. 15/20115 (E2) Issue Date 27 April 2017 Expiry Date 08 October 2020 LR Sheet 3 of 3 71 Fenchurch Street, London EC3M 4BS Is a subsidiary of Lloyd's Register Group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

4 Document no: HTS/ETS Issue number 0 Page 1 of 3 Design Appraisal Document Date 27 April 2017 Am Sandtorkai Hamburg Please quote this reference number on all future communications Telephone +49 (0) Fax +49 (0) HPC / /TW/KW hamburg-technical-support@lr.org THE LLOYD S REGISTER S TYPE APPROVAL SYSTEM, 2015 ISSUED TO: DEIF A/S, SKIVE, DENMARK FOR: PROTECTION AND POWER MANAGEMENT UNIT, GENERATOR PROTECTION UNIT, PARALLELING AND PROTECTION UNIT TYPE APPROVAL CERTIFICATE NO. 15/20115 (E2) The undernoted documents have been reviewed for compliance with the requirements of the Lloyd s Register s Type Approval System Procedure TA14 and this Design Appraisal Document forms part of the Certificate. APPROVAL DOCUMENTATION Unnumbered Application Checklist HTS/ETS Design Appraisal Document for Certificate No. 15/20115 (E1) Software Quality Plan for PPU 3000 version A Data sheet Paralleling and Protection Unit PPU A Designer s handbook Paralleling and Protection Unit PPU A Installation instructions Paralleling and Protection Unit PPU A Operator s manual Paralleling and Protection Unit PPU IPA0331 HWFMEA Failure Mode and Effects Analysis (Hardware) IPA0331 SFME Failure Mode and Effects Analysis TEST REPORTS EPC 658 Multiline 300 HW update test data (215 pages) EPC 0658 PPU 300 witness test LR Unnumbered PPU 300 Factory Acceptance Test Version FINAL ACCEPTANCE OF ACTUAL ITEM(S) DEPEND(S) ON SATISFACTORY SURVEY AND TESTING Is a member of Lloyd s Register group Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. Form 6438MARREF ( )

5 Date 27 April 2017 Am Sandtorkai 41 Document no: HTS/ETS Issue number 0 Page 2 of Hamburg Please quote this reference number on all future communications Telephone +49 (0) Fax +49 (0) hamburg-technical-support@lr.org HPC / /TW/KW DRAWINGS ACM3.1 ML Rev.: E PCB assembly top ACM3.1 ML Rev.: B EIM 3.1 F100 ML Rev.: H PCB assembly top EIM3.1 MI Rev.: D GAM 3.1 ML Rev.: E GAM3.1 ML Rev.: D ML300 IOM Rev.: E IOM3.1 ML Rev.: C PCM 5TX ML Rev.: I PCM3.x ML Rev.: F BU ML Rev.: I LR Senior Specialist Electrotechnical Systems T +49 (0) E thorsten.wolff@lr.org FINAL ACCEPTANCE OF ACTUAL ITEM(S) DEPEND(S) ON SATISFACTORY SURVEY AND TESTING Is a member of Lloyd s Register group Form 6438MARREF ( )

6 Date 27 April 2017 Am Sandtorkai 41 Document no: HTS/ETS Issue number 0 Page 3 of Hamburg Please quote this reference number on all future communications Telephone +49 (0) Fax +49 (0) hamburg-technical-support@lr.org HPC / /TW/KW Supplementary Type Approval Terms and Conditions Type Approval certifies that a representative sample of the product(s) referred to herein has/have been found to meet the applicable design criteria for the use specified herein. It does not mean or imply approval for any other use, nor approval of any product(s) designed or manufactured otherwise than in strict conformity with the said representative sample. Type Approval is based on the understanding that the manufacturer s recommendations and instructions and any relevant requirements of the Rules and Regulations are complied with. Type Approval does not eliminate the need for normal inspection and survey procedures required by the Rules and Regulations. reserves the right to cancel or withdraw this Type Approval Certificate in accordance with the LR Type Approval System Procedure. FINAL ACCEPTANCE OF ACTUAL ITEM(S) DEPEND(S) ON SATISFACTORY SURVEY AND TESTING Is a member of Lloyd s Register group Form 6438MARREF ( )

7 Part 2 Power Distribution Systems / Protective Devices Producer/Licence No. Type Standard Rating Category/ Additional Tests Remarks Cert. No. Deif A/S Friesenborgvej 33, DK-7800 Skive, Denmark Protection and power management unit, generator protection unit, paralleling and protection uni Types PPM 300 EIM 3.1 Engine input module GAM 3.1 Governor/AVR module Manufacturer s specification Power supply (Vdc): 12 and 24 Input voltage (V ac): (2-897*) Input current (A ac): 1 or 5 ( *) Input frequency (Hz): (15-78*) (* = measurement range) ENV1, ENV2, ENV3 (2013) Low temperature (-25C /16 hours) Expires: 08 October 2020 Unless an LR software conformity assessment has been carried out for the units the EIM card may provide diesel safety functions as back up only to provide design diversity and an additional short circuit protection independent of PPM 300, GPU 300 resp. PPU 300 is to be provided. 15/20115 (E2) 2.0.x.x (EIM 3.1) GPU 300 PPU 300 EIM 3.1 Engine input module GAM 3.1 Governor/AVR module 1

8 Part 2 Power Distribution Systems / Protective Devices Producer/Licence No. Type Standard Rating Category/ Additional Tests Remarks Cert. No. 2.0.x.x (EIM 3.1) 2