EU DECLARATION OF CONFORMITY (Doc) issued in accordance with the MARINE EQUIPMENT DIRECTIVE (MED) and EU/US MRA

Transcription

1 EU DECLARATION OF CONFORMITY (Doc) issued in accordance with the MARINE EQUIPMENT DIRECTIVE (MED) and EU/US MRA This is to certify that in compliance with the Directive 2014/90/EU of the European Parliament and of the Council of 23 July 2014 on marine equipment and EU/US Mutual Recognition Agreement 2004/425/EC: Vescom BV St. Jozefstraat 20 P.O. box AB DEURNE T +31 (0) E sales@vescom.com W declares that the product detailed below is in conformity with the requirements of the above Directive as evidenced by the Conformity Route below: EC Type Examination (Module B) Certificate No. MED expiry issued by the Notified Body (No. 0038) USCG Product Approval Category USCG marking /EC0038/MED AND EC (Module D) Certificate of Conformity No. MED /M2 expiry issued by the Notified Body (No. 0038) Design: Description: Type: Brant, Cyprus, Dalma, Dodan, Furka plus, Jemo, Leone plus, Malta, Scott Upholstery Furniture Fire Resisting Material Vinyl Fabric Standards applicable: IMO Res. MSC.61(67) (FTP Code) Annex 1, Part 8 IMO MSC/Circ IMO MSC/Circ Tested by: Fire Technology Services Test report no c/04/04, dated Vescom BV Deurne, 2018 F. van Werkum USCG Approval number: Director /EC0038/MED THIS DOCUMENT TO BE RETAINED FOR LEGAL PURPOSES According to Art. 16 of Directive 2014/90/EU a copy of the EU DoC covering the equipment on board an EU flag ship shall be provided to the ship and shall be kept on board until the said equipment is removed from the ship.

2 Lloyd s Register Notified Body authorised by the MCA USCG.EU MRA *W Maritime & Coastguard Agency EC TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: LLOYD'S REGISTER VERIFICATION LIMITED (LRV), designated as a "notified body" under the terms of the Merchant Shipping (Marine Equipment) Regulations 2016 (S.I No. 1025) did undertake the relevant type approval procedures for the equipment identiíied below which was found to be in compliance with the essential Fire protection equipment requirements of Marine Equipment Directive (MED) 2014/90/EU and Commission Implementing indicating desigr, construction and performance requirements and testing standards for marine equipmen! subject to any conditions in the Design Appraisal Document attached hereto. Manufacturer (Applicant) Address Reference Regulation ltem (No & Item designation) USCG CategoryNumber PToductType St. Jozefstraat AV Deume Regulation20l/306 MED/ UPHOLSTERED FURNITURE 7&.1M-UPHOLSTERED zurniture MATERIAL HAVING QUALITIES OF RESISTANCETO THE PROPAGATION OFFLAME Product Description Upholstered Fumiture Fire Resisting Material - Type: "Vinyl Fabric - Ref T706040" Specified Standard IMO Res. MSC.61(64 - ftp Code) Annex l Part 8 IMO MSC/Circ IMO MSC/Circ IMO Res. MSC.307(88) - (2010 FTP Code) Part 8 The attached Design Appraisal Document (schedule) forms part of this certificate. This ceéificate remains valid unless cancelled or revoked, provided the conditions in the attached schedule are complied with and the equipment remains satisfactory in service. Date of issue 5 October 2017 Expiry date AOctober 2022 Certificate No. MED Signed W Sheet No L of 3 Name J. M. Evans For and on behalf of Lloyds Register Verification LRV EC Distinguishing No. fi)38 Note: This ceéificate is issued under the authority of the MCA. This certificate is not valid for equipmen! the design or manufacture of which has been varied or modified from the specimen tested. The manufacfurer should notify the notified body named on this certificate of any modification or changes to the equipment in order to obtain a valid CeÉificate. USCG-EU MRA - This product has been assigned a U.S. Coast Guard Module B number: USCG Module B number 1ffi.1MlEC003f3to note type approval to Module B only as it pertains to obtaining U. S. Coast Guard approval as allowed by the "Corrigendum to Council Decision mm/a2vfc of 21 April 20(X on the conclusion of an Agreement between the European Community and the United States of America on the mutual recognition of certificates of conformity for marine equipment " Uoyds Register VeriÍication Lirnited (Reg. no ) is a limited company registered in England and Wales. Registered office:71, Fenchurch Sbeet, Londo& EC3M 4BS, UK. A subsidiary of Lloyds Register Group Limited. any Íesponsibility or liability is exclusively on the terms and conditions set out in tftat contract.

3 R Lloyd's Register Verification Limited 71, Fenchurch Street, London, EC3M 4BS LlOyd S Telephone Fax Reg istef med@lr'org Page 2of 3 Document numbeí MED Issue number 1 DESIGN APPRAISAL DOCUMENT Date 13 February 2018 Quote this reference on all future corrnunications soutso/sfs / T A / IE / WP ATTACHMENT TO EC TYPE DGMINATION (MODULE B) CERTIFICATE No. MED The undemoted documents have been appraised for compliance with the relevant requirements of Intemational Conventions and European Union legislation for the EC Type Examination of Marine Equipment for use on Merchant Ships Registered in the European Economic Area. This Design Appraisal Document (schedule) forms part of the CertiÍicate. APPROVAI.GXAMINED DOCUMENTATION Fire Technology Services, Leeds, United Kingdom, Fire Test Report No C /M/04 dated 28th June CONDITIONS OF CERTFICATION 1. Vinyl upholstery consisting of: PVC topcoat (1.10mm nominal thickness) on a PVC foam layer (nominal weight 690g/m2) and PES/Co (65/35) backing material (nominal weight 110glm2). Total weight 800g/m, 2. Composition of individual layers to be maintained in production in accordance with originally tested composition formula 3. Production items of the subject equipment are to be manufactured in accordance with either an approved Production Quality Assurance system (Module D), a Product-Quality assurance system (Module E) or a Product Verification Process (Module F). The wheelmark cannot be afíixed to the product until a coníormity assessment module is in place 4. This product has been assigned a U.S. Coast Guard Module B number USCG Approval Category 7(/..14 /F;C0038 ta note type approval to Module B only as it pertains to obtaining U. S. Coast Guard approval as allowed by the "Corrigendum to Council Decision 20M/425/EC of 21 April 2004 on the conclusion of an Agreement between the European Community and the United States of America on the mutual recognition of certificates of conformity for marine equipment" In those instances where the Notified Body conducting the coníormity assessment in accordance with either Module D, E or F of the Marine Equipment Directive is not Lloyd's Register VeriÍication Ltd., such Notified Body would use the above U.S. Coast Guard Module B number to provide the manufacturer with the U.S. Coast Guard approval number by noting it on the Certificate of Conformity, thereby authorizing the manufacturer to mark the product accordingly Note: For products placed on board U.S. flagged ships there is no declaration of conformity required to meet U.S. Coast Guard requirements 5. Each item, batch or lot of the equipment is to be issued with a "Declaration of ConÍormily' and have the "Mark of ConÍormity" affixed after a conformity assessment module is in place PLACE OF PRODUCTION St. Jozefstraat AVDeume FORM ó438 (04/96) "Lloyd's Register Verífication is the business name oflloyd's Register Verification Limited, a member oflloyd's Register Group. Regishation number

4 Lloyd's Reg istef Lloyd's Register Verification Limited TL Fenchurch Street, London, EC3M 4BS Telephone Fax Page 3of3 MED DESIGN APPRAISAL DOCUMENT Date L3 February 2018 Quote this reference on all future comunications soutso/ sfs / T A / IE / W P e ATTACHMENT TO EC TYPE DGMINATION (MODULE B) CERïFICATE No. MED Jessica Evans Senior Specialist Statutory Fire & Safety Southampton Technical Support Office, Marine & Offshore For and on behalf of Lloyd's Register Verification LRV EC Distinguishing No FORM 6438 (04i96) "Lloyd's Register Verification is the business name oflloyd's Register Verification Limited, a member oflloyd's Register Group. Regisbation numb er

5 Lloyd's Register Notifted Eody authorised by the MCA M Maritime & Goastguard Agency EC (MODULE D) CERTTFTCATE OF CONFORMTTY LLOYD'S REGISTER VERIFICATION LIMITED (LRV), designated as a "notiéied body" under the terms of the Merchant Shipping (Marine Equipment) Regulations 2016 (S.I No. 1025) did undertake an assessment oí the subject manufacturels auaft'y System as per requirements of Armex II Conformity to type based on quality asswance of production process (Module D) of Marine Equipment Directive (MED) 2014/90/EU and Commission Implementing Regulation FU) 2017/306 indicating design, corutruction and performance requirements and testing standards for marine equipment and was found to coníorm with the requirements for the Product Types below. Manufacturer (Applicant) Address Authorised Representative Address St. Jozefshaat AV Deume Netherlands, The Reference Regulation Item (No & designation) Regulation MED/3.18 Surface Materials and floor coverings with low flame-spread and óaracteristics (a) Decorative veneers MED/3.19 Draperies, curtains and other suspended textile materials and filnu MED/3.20 Upholsteredfumiture Approval is subject to continued maintenance oí the requirements of the above mentioned Directives and to all products continuing to comply with the standards and conditions of EC Type Examination Certificates issued by Lloyds Register VeriÍication or other NotÍied Body when they are of the above Designation(s). Approval is further subject to continued maintenance of the certified quality management system in accordance with the requirements of LRQA certificate number RQA or an equivalent replacement thereof. Authorisation is hereby given to the manuíacturer to use the LRV Notified Body Regishation Number 0038 in accordance with the requirements of the specified Directives in relation to the described products. This certificate remains valid unless cancelled or revoked, provided that products manufactured under this Certificate remain satisfactory in service and the above quality management system continues to be approved. First issue L8 February 2016 Date of issue 14 February 2018 Expiry date 17 February 2019 CertiÍicate No. MED 16s012slM2 Signed Sheet No 1oÍ2 Name J. Deboer For and on behalf of Lloyd's Register Verification LRV EC DistinguishingNo. fl)3{l Note: This certificate is issued under the authority of the MCA. No product shall be manufactured under this Certificate unless a valid EC Type Examination Certificate (Module B) is held on that producís Technical File. The manufacturer shall advise the Notlfied Body of all proposed modifications or changes to a product for which an EC Type Examination Certificate (Module B) has been issued, and of proposed changes of manufacfuring location or process, and shall retain copy of their written authorisafion or CeÉification of such changes. # 0038/yyyy Subject to the ManuÍacfure1s compliance with the Íoregoing and those conditions oí the Directive, the Manufacturer or his Authorised Representative is allowed to affix the 'Mark of Conformity' to producb of the types shown above. yyyy = The year in which the mark is affixed. Lloyd's Register Verification Limited (Reg. no ) is a limited company registered in England and Wales. Registered office: 71 Fenchurch Sheí Londo& EC3M 4BS, t lc A subsidiary of Lloyd's Register Group Limited. any responsibility oí liability is exclusively on the terms and conditions set out ín that conhact.

6 RDate 14 February 2018 Lloyd s Register Lloyd's Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS Telephone med@ lr Quote this reference on all future communications sourso/ralqa-med/ld Page 2of 2 MED /M2 1. EC OUALITY SYSTEM ímodule D) CERTIFICATE MED No. MED Places of Production St. JozeÍsbaat AV Deume Module B No's Regulation Item number USCG Approval Number Date of Issue / Revision Notified Bodr MED MÊD/3,20 \U.1WECO0U],^íED Oct-2017 m38 MED A.1./3.78a 1il.112lEC003Á,^','ED May MED /M1 A.1/3.L8a 7&.112/8C /.^ {1 08-Mar2O M A.1,/3.1,9 1,&.1r1,/8C0736il c003É ^ííed 02-Aor-201, O55 A.1./3.20 7@.7M EC07 36 lí /8C Apr