GUJARAT MINERAL DEVELOPMENT CORPORATION LIMITED. Lignite Project, Panandhro, Tal: Lakhpat,

Transcription

1 TENDER NO GMDC/PND/SCRAP/001/14-15 SEALED TENDER IS INVITED FOR DISPOSAL OF SCRAP MATERIAL LYING AT OUR LIGNITE PROJECT, PANANDHRO, TAL. LAKHPAT, DIST. KUTCHH. ON AS IS WHERE IS BASIS: 1) Item & Quantity As mentioned in the list attached (Lot No 1,5,6,47,49& SME-63) Page no 7 2) Inspection Scrape can be available for inspection at Lignite Project,Panandhro Tal. Lakhpat, Dist. Kutch. During working hours Except holidays. Working hours, 8 AM to 4 PM : Lunch Time 12 Noon to 1 PM. Weekly Off : Sunday. (Other holidays as per Govt. Rules). Id: panadhro@gmdcltd.com Contract Person : Mr.A.K.Garg GM (Project) Phone No ) Tender fee Rs. 500/- per Tender (Non refundable) by Cash / M.O/DD. (by hand). Rs. 700/- per Tender (by Mail). 4) EMD EMD by DD or RTGS drawn in favour of GMDC LTD payable at Panandhro Kutchh or Dayapar Kutchh. 5) Last Date & Time of issue of 22/10/2014 Upto 3.00 p.m. Tender by hand. 6) Last Date & Time of issue of Tender by Post 20/10/2014 Up to 10 a.m 7) Last date & time of Submission of tender. 28/10/2014 Upto 3.00 p.m 8) Date & Time of Opening the tender in presence of bidders. 31/10/2014 Upto 3.00 pm

2 Note: 1. TCS will be 1.00% or as applicable on all items & VAT will be charged extra as applicable. 2. Service tax 12.36% or as applicable will be charged on rent charges. 3. The corporation reserves it s right to reject any OR all the tenders without assigning any reasons thereof.bidders must quote their prices against each item. 4. For quoted prices, instructions any to be strictly followed given under each groups of items. 5. Tender document can be down loaded from our Website However in such case bidder has to submit tender fee Rs 500/- by demand draft drawn in favour of GMDC LTD payable at Panandhro Kutchh or Dayapar Kutchh along with tender. Name & Address of Bidder.

3 TENDER NO GMDC/PND/SCRAP/001/14-15 Lot No Description U.O.M. Quantity Vat % TCS on basic amount +VAT amount is charged. EMD in Rs 1 D.G.Set 1000 KVA,Make: Cummins,Model: KTA 3067G,Sr.no NO L&T 300 CK II HYD.EXCAVATOR PROJECT MT Sr.No 02,GJ-12-AN-1124,TATA HITACHI EX- 400 HYD.EXCAVATOR GJ-12-AN-1119 Note: R.T.O Registration cancellation certificate obtained. 6 BEML Dozer D 155 KT 1150 C GJ 12 AN 1132 MT & BEML BH-35 DUMPER SR.NO 29,GJ-12-Y Note: R.T.O Registration cancellation certificate obtained. 47 Spares for Usha Telehoist 27 items LOT Spares for Hyd.Excavator Eder 165 items LOT SME-63 Bucket Wheel Excavator Spares LOT Bidders sign and stamp:

4 GENERAL TERMS & CONDITIONS OF SALE 1) Material is sale on As is where is basis. 2) The corporation may increase/decrease/delete the quantity/items before delivery & may split any OR all items to one OR more parties. a) The person signing the schedule of RATE(S) will be deemed to be the only authorized representative of the bidder for any or all transactions with GMDC in connection with this Tender. His signature will be considered as authorized signature. b) All rates and prices in the tender should be both in figures and in words written in the schedule of Rate(s) Tender(s) containing overwritten or revised rates without being authenticated by bidder Signature is / are liable to be rejected. Should there be any variation between the rates indicated in figure and words, the higher of the two shall be considered. Taxes and duties will be extra as applicable. 3) Offer should accompany earnest money deposit lot wise by demand draft or through RTGS, in favour of G.M.D.C. Ltd. payable at Panandhro Kutchh or Dayapar Kutchh. Offers received without earnest money deposit/tender fee will not be considered in any case. EMD will not attract any interest charges. Bidders are advised to write or affix their rubber stamp at the back of the DD towards EMD showing the name and address of their firm / company. 4) After opening of tenders successful bidders will be informed about acceptance of their offer, by issuing offer letter. 5) After issuance of such intimation to successful tenders, they will have to obtain delivery order from stores section within 20 days time from the date of offer letter which will be issued only after payment of full value of the material / stores along with taxes/tcs / duties for which their offers has been accepted. 6).DEFAULT IN PAYMENT: In case of default in payment of the balance Sale Value within 20 days from date of Offer Letter the due payment may be made together with additional 1% per week or part thereof calculated on the Full 100% Sale Value for a minimum period of one week or multiple thereof. EMD will be adjusted towards material value only on receipt of the balance Sale Value within the prescribed time. However, this shall not confer any right to the Successful bidder to make any Late Payment of Balance Sale Value or applicable Duties and Taxes and GMDC reserves the right not to accept the payment of the Balance Sale Value with or without the additional charges after the expiry of the free payment time.

5 7) After issuance of delivery order s successful bidder will have to take delivery of material within 45 days time from the date of Delivery order failing which corporation may dispose off the same to any other party in any manner at the risk and cost of the successful bidder and their earnest money will be liable to be forfeited. Default in lifting materials: In case of any Default in lifting of materials by the successful bidder within the prescribed free time limit, the outstanding material may be lifted within 14 (Fourteen) Days from the due date subject to payment of Ground Rent by the successful bidder directly to the GMDC for the period of delay. Ground Rent will be 1% per week or part thereof. If successful bidder does not take delivery of the materials after issuing delivery order corporation will cancelled delivery order without intimation to the party and will forfeit 25% amount paid against tender without giving any notice as well as take action for damaged cause to the corporation. 8) Bidders should quote separately for each Lot. Offers for all lots will not be considered and will be rejected except for the items specifically mentioned in the terms & conditions. 9) The corporation reserves the right to reject any OR all the offers for one or more or all the items without assigning any reasons thereof and is not liable to the bidders for any consequent losses or damages arising there from. 10) The prospective bidders are advised to inspect the material / stores at our works site during working hrs. of stores offices before submitting their offers. 11) Any conditional offer is not binding to the corporation and is liable to be rejected. 12) The offers should reach the corporation registry department in sealed cover super scribed with the words offer for disposed off scrap and Tender No,date of opening with due earnest money/tender fee on or before 3.0 p.mof. 28/10/ ) Tender offers will be opened on 31/10/2014 at 3 pm. bidders can remain present at the time of opening. 14) The offer/s will be deemed to have submitted on the basis that bidder has agreed to all these terms & conditions of the tenders. 15) The decisions of the corporation in case of dispute will be binding to the bidders. 16) Validity of the tender should be not less than 60 days from the date of opening of the tender, if required by the corporation; the bidders will have to extend the validity for a further period of 30 days.

6 17) The tender submitted in contravention of the terms & conditions stated herein will not be considered. 18) The courts at Ahmedabad in Gujarat State only will have jurisdiction to deal with and decide any legal mater or contract between the parties hereto. 19) Documents/Certificate prescribed in Condition 20 to 24 herein below in case of those Items / Lots which comprised Hazardous Waste materials within the meaning of the Hazardous Waste (Management and Handling) Rules, 1989 These Documents Certificates should be duly attested by a Notary Public :- SALE OF HAZARDOUS WASTE ITEMS: 20) The sale of Hazardous Waste items, namely Waste Oil and specified categories of Non-Ferrous Metal Waste will be governed by Hazardous Wastes (Management & Handling) Rules, 1989 and its Amendments and the sale of Batteries will be governed by the Batteries (Management & Handling) Rules, 2001 and its Amendments. For such items, only those Parties shall be eligible to bid who have Valid Registration Certificates from the State as well as Central Pollution Control Board (PCB). 21) In case of Sale of Waste Oil & specified Non-Ferrous Metal Waste involving transport of such material to the successful bidder s Plant / Processing Unit located in a State other than Gujarat state, the successful bidder must obtain and submit 'No Objection Certificate' from the State PCB where the successful bidder's Plant / Processing Unit is located, to the Principal before taking delivery, failing which the sale will be treated as cancelled and further action will be taken by GMDC as may be deemed fit by US. 22) In case of Items other than Waste Oil, specified Categories of Non-Ferrous Metal Wastes and Batteries, which fall under the category of HAZARDOUS WASTE, the sale will be governed by the Hazardous Waste (M&H) Rules, 1989and its Amendments. 23) Party bidding for hazardous waste should have valid certificate from state as well as center pollution control board and have to submit true copy of the same along with payment made to the GMDC. Please note that delivery of hazardous materials will not be given if such certificate is not submitted to US. 24) No Lot no of this tender COVERS UNDER HAZARDOUS MATERIALS LIST.

7 25) Corporation reserves its right to demand copy of any other document / License / Certificate issued by any Statutory / Govt. Authority in favour of the bidder / Successful Bidder, if required, under any Statutory or State / Central Government Act / Law / Order / Rules etc. 26) The sale value including Sales Tax, Duties, TCS and other charge as applicable must be paid by Demand Draft / Pay Order drawn on any Nationalized bank in favour of GMDC Ltd., payable at Panadhro Kutchh or Dayapar Kutchh. Our Banker is Dena Bank Panadhro Kutchh and State Bank of India Dayapar Kutchh. 27) The goods will be sold on As is where is and No complaint basis in so far as physical condition of the same is concerned, The bidder(s) will therefore be deemed to have made themselves aware of the physical conditions, dimensions, size, weight, working conditions etc., by inspecting the materials before submitting their Tender and neither complaint nor any claim in this regard will be entertained by GMDC after the submission of the Tender. 28) Where the goods are sold by unit weight or unit number basis and not on the basis of Lot, the quantity indicated in such cases against the respective lots are purely indicative which in actual may turn out to be more or less than the indicated quantity. In case of actual quantity turning out to be less than the indicated quantity after due completion of the lifting by the successful bidder(s), the successful bidder(s) shall not be entitled to claim any damages, loss of interest or compensation on any other account, but shall be entitled to proportionate refund only. All bidders are advised to visit our site and see all the scrap materials physically and then quote the tender in order to avoid any confusion. 29) All taxes including VAT or other Levies entail on the transaction under any provincial, Local or Central taxes in force for the time being or enforced hereafter, having its impact on the transaction, will be to successful bidder s account and should be deposited by the successful bidders along with cost of the material. We are accepting C Form.We are accepting payment by RTGS. 30) The materials to be purchased by the successful bidder(s) shall be subject to all such Duties (including Excise Duty) as may be applicable from time to time and the same shall be borne by the successful bidder(s). 31) Whatever statutory rate of Excise Duty, Sales Tax/CST, other Levies etc. if any, is / are assessed and applicable on the date of actual removal / lifting of materials shall be paid / payable by the successful bidder(s). Any State / Central Duties and / or Taxes indicated in the Tender catalogue and / or GMDC after letter Delivery Order or any other Letter / Correspondence of GMDC will be only indicative and any error in same will not be accepted as an excuse from the successful bidder in this regard.

8 32) The successful bidder(s) will be responsible to comply with provisions of Central and State Excise and Sales Tax Act and concerned State and the Rules framed there under and also by the Order / Instructions issued in this behalf by the appropriate Authority. 33) In the event of dispute with regard to Excise duty and Central Excise Authorities levying and additional charges, such Duty / charges shall be payable by the successful bidder(s). Any penalty imposed by the Excise Authorities for non-observance of Excise procedure by the successful bidder(s) shall also be borne by them. 34) In case of sale of mining heavy earth moving equipment or light/heavy vehicle, delivery of vehicle will be given only after completion of RTO formalities. 35) No hot-work permission shall be allowed to the successful bidder inside the principal's stockyard premises for dismantling operations, if allowed such hotwork permission would be at successful bidders cost only to the extent of facilitating the loading and transportation of the goods and subject to that successful bidder take due precaution. 36) For the purpose of removing the materials, the successful Bidder shall employ or engage only his / their own personnel and shall keep the Principal fully indemnified against any claims whatsoever including claim for wage, injuries, compensation, death etc. 37) While removing materials, if any accident or damage to the property/life etc. arises by reason of any act of negligence /omission /default or non-compliance with any of the Terms & Conditions of statutory regulations or rules and regulations applicable within GMDC S premises, on the part of the Successful bidder's / his representative or employees resulting in death or injury to any persons or damages to the property of GMDC or any third Party then in such an event the successful bidder will have to pay compensation to any such person including the employees of GMDC for such injury / for damage to person's property of such persons. The successful bidder shall in such event keep the GMDC indemnified from any demand, claims or proceedings made. 38) In case of Goods sold on Lot Basis, the Ground Rent will be calculated on the value of the entire Lot even if lifted in part, where as in case of Goods sold on Unit Weight or Unit Number Basis, the Ground Rent will be calculated on the value of un-lifted quantity. 39) Bidders have to sign each pages of this tender document as a token of acceptance of its all terms and condition. 40) The Earnest Money Deposit of all unsuccessful bidders shall be returned immediately except to the highest and second highest offer.the EMD of the second highest offer shall be returned on finalization of the Tender bid.

9 41) For taking delivery of materials successful bidder have to bring Original Delivery order, Original and True copy of Photo ID proof of driving license/pan Card/Election Card, Original Letter pad, Rubber Stamp of your firm. In case successful bidder authorized someone, then he has to bring all documents as stated here and authorizing letter containing signature of representative on letter pad of successful bidder duly authorized by bidder signature. 42) Tenders once submitted cannot be withdrawn on any account. 43) You will also provide and maintain until the scrap is lifted by you, Third party liabilities and property damage insurance, Workman s compensation and road vehicle third party insurance. 44) Since it will not be possible for us to inform each and every bidder regarding updating made in the tender after publishing it hence bidders are adviced to download and carefully study latest updated tender copy on our website before submitting to us. 45) Please write invariably your Id so that any tender updating,offer letter, Delivery Order etc can be mail to you quickly. 46) The Arbitration Clause: Matter relating to any dispute or difference arising out of this tender and subsequent contract based on the bid shall be subject to the exclusive jurisdiction of courts at Ahmedabad only All questions, disputes, differences whatsoever which may at any time arise between the parties to this contract in connection with the contract or any matter arising out of or in relation thereto shall be referred to Sole Arbitrator as per the provisions of Arbitration and Reconciliation Act 1996 and the venue of arbitration proceedings shall be at Ahmedabad. The language of the Arbitration shall be in English 47) Spares quantity written in lot no 47,49 and SME-63 is approximate and actual quantity may vary or some of the spares may not be even available.since we are selling spares on lot basis no claim will be entertained for shortage in spares quantity.

10 Price Bid GMDC/PND/SCRAP/001/14-15 Lot No Description U.O.M. Quantity Rate in Rs per UOM Total Value in Rs Total Valu Words 1 D.G.Set 1000 KVA,Make: Cummins,Model: KTA 3067G,Sr.no NO 1 5 L&T 300 CK II HYD.EXCAVATOR PROJECT Sr.No MT ,GJ-12-AN-1124,TATA HITACHI EX-400 HYD.EXCAVATOR GJ-12-AN-1119 Note: R.T.O Registration cancellation certificate obtained. 6 BEML Dozer D 155 KT 1150 C GJ 12 AN 1132 & MT 50 BEML BH-35 DUMPER SR.NO 29,GJ-12-Y-9716 Note: R.T.O Registration cancellation certificate obtained. 47 Spares for Usha Telehoist 27 items LOT 1 49 Spares for Hyd.Excavator Eder 165 items LOT 1 SME-63 Bucket Wheel Excavator Spares LOT 1 Note: Taxes and duty will be charged extra as applicable.

11 Bidders sign and stamp: An ISO Certified Company Lot no 47 LIST OF THE SPARES -SUITABLE FOR USHA TELEHOIST MAKE Sr No Code No Part No Decription UOM Qty C 6214 / HYD. PRESSURE HOSE NO C HYD. FLEXIBLE HOSE NO UT 165 TRANION ANGLE NO UT 16 IDLER SHAFT NO UT 773 TRANSMISSION GEAR NO VALVE BODY NO INNER TUBE & CROSS HEAD 10/24849 ASSY. NO INTER TUBE NO / K 23 PTO GEAR NO UT 2648 GLAND NUT NO UT 2649 GLAND NUT NO ELBOW NO END PLATE NO / B LOCKING RING NO UT 2695 DEEP STICK NO UT 71 / A PRESSURE PIPE ASSY. NO DISTANCE PIECE NO SER KIT PUMP KIT NO PISTON RETURN ATUBE NO INNER PISTON NO TRUNNION ARM NO 15

12 RH UT 316 TRANION BRACET NO LH UT 316 TRANION BRACET NO PRESSURE PIPE ASSY. NO GLAND NUT NO VALVE BODY NO SWASH PLATE NO 1 Lot no 49 List of the spares suitable for EDER make Hydrualic Excavator. Code Sr No No Part No Decription UOM Qty SEAL KIT NO NOZZEL WITH HOLDER NO COUPLING ELASTIC MEMBER NO O RING NO O RING NO VALVE DOMPLETE NO / BRACKE LININ NO / RIVET NO HOSE NO HOSE NO SEL KIT JOINT NO BUSH NO SEAL NO HOSE NO HOSE NO SEAL KIT NO 2

13 / RELAY NO /41.026A RELAY NO BRAKE HOSE NO BALL COCK NO RELIF VALVE NO STARTER SWITCH NO BOLT NO OIL SEAL[F.W.F] NO VALVE SPRING NO SEALING RING FOR FUEL FILTER NO / SEALING RING NO / SELING RING BOTTOM NO O RING FOR DIP STICK NO DIAPHAM NO SEAL KIT NO REPAINT KIT NO HOSE NO SOLENOID NO MASTER CYLINDER KIT NO BUSHING NO BUSHING NO BUSH NO HOSE NO SEAL KIT NO TEETH NO HOUR METER NO VOLVE COLLECT NO NOZLE NO SEAL RING NO LUBRICATE NO OLIVE NO CAM SHAFT BUSH NO 2

14 DOWEL PIN FOR THRUST RING NO JOINT FOR BLANKING PLATE NO COPPER WASHER NO THRUSTER WASHER SET NO BUSH FOR INJECTOR NO KEAK OFPIPE INDUSRIAL NO BENJO BOLT NO RUBBER SLEVE NO FUEL INJECTION PIPE CYL NO FUEL INJECTION PIPE CYL-2 NO FUEL INJECTION PIPE CYL-3 NO FUEL INJECTION PIPE CYL-4 NO FUEL INJECTION PIPE CYL-5 NO FUEL INJECTION PIPE CYL-6 NO SEALING STRIP NO SEALING RINGE TOP NO SPRING NO SEALINGH WASHER NO OIL FILLING CVP ASSY. NO RUBBER SLEEVE NO GROMMET RUBBER SEEVE NO SEALING RINGE NO RUBBER BUSH NO SEALING RING FOR BOWL NO RUBBER O RING NO RUBBER O RING NO SET OFRUBBER O RING SET JOINT FOR FUEL PUMP NO JOINT FOR FRONT COVER NO ROCKER COVER [ALUMINIUM] NO /80X030 SET BOLT NO PLAIN WASHER NO ROCKER ARM ADUSTING NO 9

15 LOCK NUT NO OIL INTERRING NO DOUBLE CONE RING NO SPRING FOR FILTER NO SEALING RING NO ELECTROLOCK NO SEAL NO HOSE COMPENSTING DEVICE NO HOSE (PILOT LINE) NO / O RING VALVE BODY NO O RING NO O RING NO SEAL KIT NO SEAL RING NO CENTRAL ROTARY NO HOSE PILOT NO FITTING NO SEAL KIT NO SEAL KIT NO EXTERED SEAL KIT NO GASKET NO STOOPER NO / INSUL COUPLING NO HOUSING NO BULB AMPUL NO SWITCH NO BUSHING NO NUT (HYDRAULIC NUT GRIDE BOX) NO AIR CLEANER COMPLET ASSY NO SHIMS RING NO OIL SPERAY NOZZLE ASSY NO HOSE CONNEATION NO 3

16 OIL PSRAGNOZZLE NO LEAK OFF PIPE CONNECTOR NO CLAMP HOSE NO CLAMP HOSE NO ELEMENT CLAMP NO DIUAL BENJO BOLT NO SHIM RING NO LOCATING PIN NO BUSHING NO BUSHING NO FITTING NO FITTING NO O RING NO O RING NO O RING NO O RING NO O RING NO O RING NO GASKET NO SEAL KIT NO FUEL HOSE NO TRACK LINK LH NO RTRACK LINK RH NO BUSH NO PIN NO MASTER BUSH NO BUSH NO NUT NO REPAIR KIT NO BRAKE HOSE NO RIVET NO FAN NO PIN NO 1

17 CLAMP NO OIL SEAL F.W.E. NO SEAL NO SEAL NO HOSE NO COCK NO ALLUMINIUM COUPLING NO ELLOCOS NO SUCTION HOSE NO STEEL BALLS 26MM NO O RING NO PRIMERY VALVE NO LEAK PIPE NO X85X13 / OIL SEAL NO H.T.H.H. BOLT M24X110X2 NO OIL SEAL 140X170X15 NO GASKET FOR ROCER COVER NO L & T BEARING SET TOP & B BOTTOM SET BEARING NO 2

18 Lot No 1 D.G.SET

19 Lot No 1 D.G.SET

20 Lot No 1 D.G.SET

21 Lot No 1 D.G.SET

22 Lot No 1 D.G.SET

23 Lot No 6

24 Lot No 5

25 Lot No 5

26 Lot No 5

27 Lot No 6

28 Lot No 47

29 Lot No 49

30 SME-63 BUCKET WHEEL EXCAVATOR SPARES

31 ITEM CODE ITEM DESCRIPTION UOM QUANTITY SHAFT TWO HINGED SHAFT NOS CUP PACKING NOS INNER DISK NOS OUTER DISK NOS BRAKE LINING NOS BRAKE LINING 500 SET DISTRIBUTOR VALVE COMBINATION FOR NOS PRESSURE REDUCING VALVE LINKING NOS FLOW LIMITING VALVE LINKING UNIT- NOS NON RETURN VALVE FOR HY. PLANT NOS PRESSURES SWITCH 3-8 FOR HY. PLANT NOS METERING VALVE PAG 42H -LUB/ NOS METERING VALVE PAG 43H- LUB. NOS METERING VALVE PAG 44H- LUB. NOS CONNECTING PIECE - LUB PLANT NOS SCREWING LUB PLANT NOS SCREWING E LUB PLANT NOS SCREWING E LUB PLANT NOS SCREWING Q LUB PLANT NOS SCREWING Q LUB PLANT NOS SPACER DR 6/12- LUB PLANT NOS CUTTING RING LUB PLANT NOS CUTTING RING LUB PLANT NOS COCK - LUB PLANT NOS SPACER DR 16/22 - LUB PLANT NOS HOSE LINE 10-8 X630 - LUB PLANT NOS VALVE CONE WITH CREST NOS MICRO SWITCH A1 H1 - LUB PLANT NOS SET OF SEALING ZP 13/3 - LUB SET GASKET Q KP /CM2- LUB NOS SPRIAL BEVEL DRIVE NOS 2

32 SPUR GEAR SHAFT NOS HELICAL GEAR NOS SPRIAL BEVEL DRIVE NOS SEAMLESS PRECISION STEEL PIPE - NOS PLANNET PINION & PLANNET CARRIER NOS CYLINDER GEAR WARM SHAFT NOS CYLINDERICAL WARM GEAR NOS CONNECTING LINKS NOS CONNECTING LINKS NOS PINION NOS BOLTS NOS PROTECTIVE HOOD A NOS PROTECTIVE HOOD D NOS BRAKE SHOE 500 W (BELT DRIVE) NOS BRAKE SHOE 630(B.W.E. MAIN DRIVE) SET MICRO 5 FILTER NO. 02- NOS AIR FILTER CARTRIDGE P.NO. 60 F NOS SOLONIDE VALVE Z-60- S-H/196 V NOS SEAL KIT SET P.NO B-1-500/320 FOR SET SEAL KIT SET SET INTERNAL LAMINA P.NO FOR NOS EXTERNAL LAMINER P.NO.122-3:2 NOS HELLICAL COMPRESSOR SPRING C 80 NOS GREASE LINE DISTRIBUTOR 2 WAY NOS GREASE LINE DISTRIBUTOR 3 WAY NOS GREASE LINE DISTIBUTOR 4 WAY PAG NOS COMP.SEAL KIT FOR GEAR PUMP TYPE SET COMP.SEAL KIT FOR GEAR PUMP TYPE SET BEARING - SHIFTING FOR DRIVING NOS BEARING - SHIFTING FOR DRIVE DRUM NOS BUSHES FOR ROCKER ARM 220/250, NOS BUSHES FOR TWO WHEEL ROCKER ARM NOS BUSHES FOR TRACK ROLLER NOS 12

33 SUPPORT ROLLER WITH BUSHES NOS SPRIAL BEVEL DRIVE M=8, 2=8/32 NOS SPRIAL BEVEL DRIVE WITH HELICAL NOS HELICAL GEAR WITH HELICAL SPUR NOS SIPRAL BEVEL DRIVE NOS SPUR GEAR STEP NOS HOOKS FOR ROLLER NOS OIL FILTER FOR HY. SYSTEM OF MTC NOS OIL FLOW REGULATOR /0 NOS LUBRICATION PIPE NOS LUBRICATION PUMP ZP 175/80 NOS BEARING CCK /W 33 NOS SLEEVE H3148A NOS BARING P/N NOS BEARING CC/C3 W 33 NOS BEARING 6228/C3 NOS BEARING CC/C3 W 33 NOS BEARING NU 414 NOS BEARING CC/C3 NOS BEARING CC/W 33 NOS BEARING E NOS BEARING E NOS BEARING CC/W 33 NOS BEARING CC/W 33 NOS BEARING CC/W 33 NOS BEARING NUP 204 ECP NOS BEARING NJ 309 ECP NOS BEARING 6017 NOS BEARING NUP 230ECJ NOS BEARING 6036 M NOS BEARING 6026 NOS BEARING 6022 NOS BEARING 6044 M NOS 1

34 BEARING NUP 238 E M 1 NOS BEARING SKF NU 2317 NOS BEARING SKF 6314 NOS BEARING CC/03 W-33 NOS BEARING NOS BEARING CC/C3 W33 NOS BEARING SPRB NOS BUSHING FOR COUPLING KSA 7:1 NOS EXTRACTION DEVICE FOR COUPLING NOS PROTECTIVE HOOD A NOS PROTECTIVE HOOD B NOS SOLENOID SWITCH M66 TYPE G35 H24V NOS SEAL KIT FOR RECIAMER RECIVING SET BEARING BALL & SHOCKET NOS WEARING PLATE 8X230X230 NOS WEARING PLATE 8X330X230 NOS WEARING PLATE 8X210X210 NOS WEARING PLATE8X120X120 NOS WEARING PLATE 2X300X120 NOS WEARING PLATE 1X300X100 NOS COUNTER SNAKE SCREW NOS HEX NUT M-12 NOS LOCKING NUT M-12 (SP. WASHER) NOS BRAKE LINING 630 SET HEX BOLT M16X55 NOS HEX NUT M16 NOS WASHER NOS LOKING NUT M16 NOS PLATE 10X120X60 NOS THIMBLE DIN 6899 BF.10 NOS WIRE ROP CLAMP DIN 1142 S.65 NOS HEX BOLT M.12X40 NOS HEX NUT M.12 NOS 8

35 LOCK WASHER A.12 NOS HYDROLIC PLUG 24V NOS BRAKE LINING 250 SET BUSHING SPLIT 360X380X240 NOS COMPLETE REPAIR SEAL KIT FOR KIT 1