ANSI A10.1 Pre-Project/Pre-Task Safety & Health Planning
|
|
|
- Kelly Richards
- 6 years ago
- Views:
Transcription
1 ANSI A10.1 Pre-Project/Pre-Task Safety & Health Planning Presenter: Pete Chaney May ANSI A10 Construction & Demolition Operations Committee Employer Employee Technical Membership 1
2 CII Zero Injury Techniques 1. Safety Pre-Project/Pre-Task Planning 2. Safety Orientation Training 3. Written Safety Incentives Programs 4. Alcohol & Substance Abuse Programs 5. Accident & Incident Investigations CII Zero Injury Techniques Safety Pre-Project: -Safety Goals -Safety Personnel -Pre-Placement Employee Evaluation 2
3 CII Zero Injury Techniques Safety Pre-Task: -Task Hazard Analysis -Task Training Ballot Process A10.1 Subgroup Full A10 Committee Primary Purpose of A10.1 Include Safety and Health in the construction planning process 3
4 Definitions Potentially Hazardous Task: -Any task that presents a substantial probability of death, serious physical harm or significant impairment to health without appropriate safety or health protective measures. Struck By Objects 4
5 5
6 Potentially Hazardous Task - cont Include, but are not limited to tasks that could result in: A fall of 6 feet or more Being struck by an object An excavation cave-in Exposure to energized electrical parts Overexposure to health hazards Routine tasks becoming non-routine Definitions cont. Complex Task: Any potentially hazardous task that requires specific competencies 6
7 Definitions cont. Project Hazard Identification: The process of identifying Complex Tasks and Potentially Hazardous Tasks throughout project construction. 1. Owners -Pre-Project (Section 4) 2. Project Constructors -Pre-Project (Section 5) -Pre-Task (Section 6) 3. Contractors -Pre-Project (Section 7) -Pre-Task (Section 8) A10.1 Format Three Main Parts: Owners Pre- Project Responsibilities: 1. Project Safety Policies 2. Safety in Design Phase 3. Project Constructor Candidate S & H Performance Evaluations Appendix B 7
8 Owners Project Constructor Candidate Safety and Health Performance Evaluation Appendix B Safety & Health Performance Measurement Criteria Guidelines -Leading Indicators -Lagging Indicators Leading Indicators Appendix B Examples: 8
9 Lagging Indicators Appendix B Examples: Fatality Incidence Rate RCIR for Injury and Illness LWDCIR for Injury and Illness EMR 9
10 Project Constructors Pre-Project Responsibilities: 1. Plan for Overall Safety and Health 2. Project Hazard Identification (Complex Tasks) Appendix C Project Constructor Project Hazard Identification Appendix C Project Hazard Identification Guidelines for Project Constructors and Contractors -Evaluate Documents -Identify Complex Tasks -Generate Hazard Identification Report Project Constructors Pre-Project Responsibilities cont 3. Hazard Identification Report 4. Project Specific Safety and Health Plan 10
11 Project Constructor Project Specific Safety & Health Plan Critical Topics 11
12 12
13 Project Constructors Pre-Project Responsibilities cont 5. Meet with Contractor Candidates 6. Contractor Candidate S & H Performance Evaluations Project Constructors Pre-Task Responsibilities: 1. Regular Safety Coordination Meetings with Contractors 13
14 Contractor Pre- Project Responsibilities: 1. Plan for Safety Within Scope of Work 2. Project Hazard Identification 3. Project Hazard Identification Report 4. Project Specific Safety and Health Plan Contractor Pre- Project Responsibilities cont 5. Meet with Sub-tier Contractor Candidates 6. Evaluate Sub-tier Contractor Safety Performance 7. Safety and Health Training Plan Contractor Safety and Health Training Plan New Hire Job Specific Site Specific Regular on Site Safety Meetings Safety Training for Supervisors 14
15 Contractor Pre- Project Responsibilities: 8. Construction Equipment Selection Based on Safety Contractors Pre-Task Responsibilities: 1. Task Hazard Analyses 2. Establish Responsibility for Supervision and Work 3. Task Specific Safety Training 4. Safety Equipment Availability Contractors Task Hazard Analysis *** Appendix D Task Hazard Analysis Guidelines: 15
16 Click the ARROW to begin playing the video Owners A Summary Project Constructors (GC/CM) Contractors (Including Sub-tier Contractors) Credit and Thanks A10.1 Subgroup Full A10 Committee 16
HULCHER CONTRACTOR SAFETY MANAGEMENT PROCESS
Hulcher Services is initiating a mission to improve safety for its employees, contractors, subcontractors, visitors, and general public. The Hulcher Contractor Safety Management Process (HCSMP) was developed
General Company Information State:
Vendor Registration Form The purpose of the Regional Connector Constructor s (RCC) registration process is to ascertain if your firm possesses the necessary experience, financial resources, and commitment
Contractor s Environmental Health & Safety Disclosure
Contractor s Environmental Health & Safety Disclosure Company Name: Application Date: Address: Phone#: Fax #: Email : Company Contacts: Name Position Environmental Health & Safety (EHS) Personnel: Name
POWER CONSTRUCTION COMPANY CCIP PROGRAM SAFETY REQUIREMENTS
POWER CONSTRUCTION COMPANY CCIP PROGRAM SAFETY REQUIREMENTS The following requirements apply to all subcontractors including tier subcontractors, vendors, deliveries, visitors and the like (herein known
Introduction. This pamphlet utilized research and reports published by the Construction Industries Institute's Zero Accidents Task Force.
Introduction The construction industry in the United States accounts for approximately 10% of the GNP with an annual dollar volume of about $450 billion. Five percent of the nation's workforce is employed
PROHSP6 Control health and safety risks
Overview This standard is for people with a role which involves: 1 managing the control of health and safety risks effectively, co-ordinating outcomes, prioritising risks and reviewing effectiveness; 2
HIGH RISK CONSTRUCTION WORK
CONTRACTOR WHS SYSTEM STANDARD HIGH RISK CONSTRUCTION WORK EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION
HAZARD MANAGEMENT POLICY Page 1 of 7 Reviewed: October 2018
Page 1 of 7 Policy Applies to: The Board of Directors, staff employed by Mercy Hospital, Credentialed Specialists, Allied Health Professionals, contractors, students, volunteers and visitors. Related Standards:
New Work Health & Safety Legislation What does it mean for you as a Business Owner, Director or Executive?
New Work Health & Safety Legislation What does it mean for you as a Business Owner, Director or Executive? Session Overview The WHS Act 2011 became law in January 2012. This presentation outlines some
Prevention. Plan/Prep
A workplace injury is the start of a series of events. These series of events can last several days to several months. An organized plan with implemented practices is a major influence on the timeline
Power Construction Company CCIP Program Safety Requirements
Introduction The following safety requirements (herein known as safety requirements) apply to all subcontractors including tier subcontractors, employees, consultants, vendors, deliveries, visitors and
Exhibit. Owner Controlled Insurance Program. Insurance Requirements
Exhibit Owner Controlled Insurance Program Insurance Requirements 1. Owner Controlled Insurance Program. COUNTY shall implement an Owner Controlled Insurance Program ( OCIP ) for the Project. The OCIP
TAMPA ELECTRIC COMPANY ENERGY SUPPLY CONTRACTOR SAFETY COMPLIANCE PROGRAM
TABLE OF CONTENTS TITLE PAGE # PURPOSE / INTRODUCTION 1 ROLES & RESPONSIBILITIES 1 EMPLOYEE TRAINING 2 SAFETY RULES FOR CONTRACTORS 3 ZERO TOLERANCE RULE VIOLATION REVIEW PROCESS 4 PERIODIC PROGRAM EVALUATION
Carson, CA Inland Star Distribution Centers, Inc. PSM/CalARP
Carson, CA Inland Star Distribution Centers, Inc. PSM/CalARP CONTRACTOR PROGRAM Revision History Rev. # Description of Change Date Revised By 0 Initial Issues July 2016 PSM RMP Solutions Purpose The purpose
CORPORATE POLICY MANUAL
Name of Policy: Contractor Safety Policy Policy Number: CPM-10-91 (replaces MPM-10-91) Responsibility: Health, Safety and Environment Department Approval: Chief Executive Officer Approval Date: March 13,
SMACNA SAFETY PROFILE Performance and Characteristics. July 2011
SMACNA SAFETY PROFILE 2011 Performance and Characteristics July 2011 Introduction Each year SMACNA conducts a Safety Awards Program to recognize SMACNA members with the lowest accident/illness rates in
Risk Assessment Policy. (Whole School including EYFS)
Responsible for Initiating Review of Policy SLT Committee to Review SLT Last Review Date April 2018 Review Period Annually Approved by (Committee and Date) SLT April 2018 Approved by Board of Governors
Accident and Incident Reporting Policy and Procedure (including Notifiable Incidents Procedure)
Purpose YPCT recognises the important role of accident and incident reporting, and investigation in ensuring the health, safety and welfare of all persons within the workplace. YPCT will ensure all accidents
Due Diligence and Accident/Incident Investigations Bills 9 and 35
Due Diligence and Accident/Incident Investigations Bills 9 and 35 Presented by: Tom McKenna, National Representative, WCB Advocacy January 19, 2016 The information is not legal advice. This information
Contractor Qualification Statement
Contractor Qualification Statement PART I OPERATIONAL INFORMATION Date: A. GENERAL Legal Name of Business: Principal Office Street Address: Zip Code: City State: Principal Office Mailing Address: Zip Code:
UC DAVIS. Plant Biology INJURY AND ILLNESS PREVENTION PROGRAM
Plant Biology UC DAVIS Plant Biology INJURY AND ILLNESS PREVENTION PROGRAM This Injury and Illness Prevention Program has been prepared by the University of California, Plant Biology department in accordance
Safety - Introduction
Safety - Introduction Disclaimer: The following slides are NOT all inclusive of the safety requirements required by the Federal, State, local governments, the contract or MWAA s Construction Safety Manual
Management Commitment. BEST Level 3 Guidance. Actions to Achieve Desired Outcomes
Management Leadership and Employee 1 Involvement Take proactive steps to build on earlier gains to improve the culture, systems, policies, and procedures that support a safe and healthy work environment.
HAZARD IDENTIFICATION AND ASSESSMENT
SOP-28 Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 11 Purpose To provide guidelines for identifying, assessing and controlling workplace hazards; To ensure the potential
PROHSP8 SQA Unit Code H8WH 04. Develop, implement and review reactive monitoring systems for health and safety. Overview
Develop, implement and review reactive monitoring systems for health Overview This standard is for people with a role which involves: 1 developing and implementing health reactive performance (loss event)
Hazard Prevention Program. Regulation 19
Hazard Prevention Program Regulation 19 Topics Purpose of the regulation Key terminology What is a Hazard Prevention Program? Overview of the regulation Steps for Complying with the Regulation Conclusion
RISK ASSESSMENT POLICY 2018
RISK ASSESSMENT POLICY 2018 INTRODUCTION A risk assessment is an important tool in protecting employees, parents, children and visitors by analysing hazards and identifying risk reduction measures. The
Archery Victoria is mindful of the risks associated with conducting archery activities and events at club level.
0521. Risk Management Policy Archery Victoria Title: Policy and Procedures Manual Subject: Risk Management Policy Author: Chief Executive Officer - Trevor Filmer Date: 1-Jul-11 Replaces: 1-Jul-11 Number:
Subcontractor Pre-Qualification Form
Subcontractor Pre-Qualification Form Please respond to the following questions and submit to Harvey as soon as possible. Companies will be notified of upcoming bids when contact with Harvey is initiated.
I. Identification of Partners
Work Safe Partnership Program II With the Sheet Metal and Air Conditioning Contractors National Association (Kansas City Chapter) And the Occupational Safety and Health Administration s Kansas City, MO
IGB ACCIDENT/INCIDENT REPORTING AND INVESTIGATION PLAN
IGB ACCIDENT/INCIDENT REPORTING AND INVESTIGATION PLAN Accident/incident Reporting It is necessary to report every accident to your supervisor and the IGB Safety Coordinator in order to learn the cause
CONTRACTOR PRE-QUALIFICATION FORM
Doc..: Rev../Date: C 3/28/2017 Page: 1 of 13 GENERAL INFORMATION 1 Person Completing this PQF: Title: Telephone: Fax: E-mail Address: 2 Contact for Requesting Bids: Title: Telephone: Fax: E-mail Address:
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS Page 1 of 5 RFP 18-PR-DMS-49 ANNUAL MAINTENANCE AND REPAIR OF INDUSTRIAL ELECTRICAL CONTROL EQUIPMENT
2016 CDM Smith All Rights Reserved July 2016 SECTION SAFETY, HEALTH, AND EMERGENCY RESPONSE
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 01 11 01 SAFETY, HEALTH, AND EMERGENCY RESPONSE A. Pursuant to Section 107 of the Contract Work Hours and Safety Standards Act and DOL Regulations set forth in
Promoting Best Practices in safety and risk management with CDRA member companies CDRA Best Practices in Safety Awards Application
Promoting Best Practices in safety and risk management with CDRA member companies. 2019 CDRA Best Practices in Safety Awards Application Application Deadline: January 14, 2019 1 ABOUT CDRA Best Practices
Contractor Pre-qualification Questionnaire
Contractor Pre-qualification Questionnaire This document shall be used to determine qualifications of contractors who shall work under Anderson Engineering Co., Inc. (AECI). AECI shall use this document
RISK MANAGEMENT DIRECTOR
PERSONNEL COMMISSION Class Code: 0578 Salary Range: 55 (M2) RISK MANAGEMENT DIRECTOR JOB SUMMARY Under general direction, to plan, organize, and direct the District s risk management program in the areas
Pipeline Regulatory Issues
Pipeline Regulatory Issues Pete Chace GPS Program Manager (614) 644-8983 Peter.chace@puc.state.oh.us Changes to the GPS Section Staff Expansion Hiring 2 new Gas Pipeline Safety Inspectors. Intent is that
Introduction to OSHA and OSHA Inspections. Jim Shelton, CAS, Houston North
Introduction to OSHA and OSHA Inspections Jim Shelton, CAS, Houston North Introduction to OSHA Occupational Safety and Health Administration Develops and enforces safety and health standards 24 States
SCHEDULE 16 SAFETY REQUIREMENTS
SCHEDULE 16 SAFETY REQUIREMENTS 1. GENERAL 1.1 Capitalized Terms Capitalized terms used in this Schedule have the definitions as set out in the Agreement to Design, Build, Finance and Operate Evan-Thomas
AECOM - SUBPORT Prequalification Questionnaire. General Information. Organization and Experience. Type of Services:
General Information Type of Services: Does your firm want to support federal programs? (Additional information will be required): Name and address of your business Name: Corporate Street Address: City:
FAQS. Prime Contractor Fulfilling Your Health and Safety Obligations. What is the definition of Prime Contractor of a multi-employer workplace?
FAQS Prime Contractor Fulfilling Your Health and Safety Obligations OVERVIEW What is the definition of Prime Contractor of a multi-employer workplace? The Prime Contractor is defined in section 118(1)
This policy aims to ensure the health, safety and welfare of contractors working on UEL premises and those affected by their work.
HR Services UEL Health and Safety Handbook Contractor Health and Safety Management Policy This policy is a sub-policy of the main University Health and Safety Policy Statement Introduction The University
CWMA Conference Workplace Responsibilities, Injury Statistics, OHS Program Requirements, And Recommended Practices
CWMA Conference Workplace Responsibilities, Injury Statistics, OHS Program Requirements, And Recommended Practices Kevin Bennett, CHSC, CRM Industry Specialist, Transportation and Occupational Road Safety
Subcontractor Partner Prequalification Form. Company Name: DBA (if applicable):
Subcontractor Partner Prequalification Form Part 1 General Company Name: DBA (if applicable): Other names your company has operated under in the past (if applicable): Scope of Work: Cities/Counties/Areas
The Workers Advisers Office (WAO)
The Workers Advisers Office (WAO) This factsheet has been prepared for general information purposes. It is not a legal document. Please refer to the Workers Compensation Act and the Rehabilitation Services
Single Contractor Agreement for Occupational Health & Safety Workers Compensation Act
Single Contractor Agreement for Occupational Health & Safety Workers Compensation Act Instructions This is a fillable form. However, you must first save the form before entering information or the data
OSHA 101 When OSHA Comes to Call!
OSHA 101 When OSHA Comes to Call! Introduction to OSHA 2-hour Lesson Directorate of Training and Education OSHA Training Institute OSHA General Duty Clause The creation of OSHA provided workers the right
General Risk Management Framework
North Gold Coast Seahawks Basketball Inc General Risk Management Framework Introduction This guide provides an outline for a North Gold Coast Seahawks Basketball Risk Management Framework. Note: This draft
If you are unsure of which sections to complete, please contact us on
Lintonville Parkway, Ashington, rthumberland NE63 9JZ Arch Business Trading Name: Application Completed by: Approval (circle as appropriate): (Refer to section 11 for full details) APPROVED REJECTED Instructions
Evolution and Ecology
Evolution and Ecology Reviewed and Revised December 2015 UC DAVIS Evolution and Ecology INJURY AND ILLNESS PREVENTION PROGRAM This Injury and Illness Prevention Program has been prepared by the University
Health and Safety Policy Statement
Health and Safety Policy Statement Under the Health and Safety at Work etc Act 1974 (HSW Act) employers must, so far as is reasonably practicable, provide: Safe equipment Safe substances Necessary information,
RISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund CONTRACTORS Municipalities often need services
Title: Environmental, Health and Safety Revision No.: 4 Effective Date: January 1, 2017
Notice: A printed copy of this document may not be the latest version. Always check online (L3 Internal Homepage, click Company Policies ) for latest version. Copyright by L3 Technologies, Inc. 2017 Corporate
DRUG AND ALCOHOL TESTING CONSORTIUM SUBSTANCE ABUSE PREVENTION PROGRAM COMMERCIAL DRIVERS. Consortium Member Agreement
DRUG AND ALCOHOL TESTING CONSORTIUM COMMERCIAL DRIVERS Consortium Member Agreement This agreement is entered into this day of, 20, between the MMUA Drug and Alcohol Testing Consortium (The Consortium)
Section 11. Records / Summaries. Table of Contents
Section 11 Records / Summaries Table of Contents 11.1 INTRODUCTION... 2 11.2 REPORTS ON FILE... 2 11.3 SUMMARIES... 2 11.4 SAFETY PROGRAM AUDIT... 3 11.5 STATISTICS... 4 ALL-CAN MONTHLY REPORT... 5 ALL-CAN
Construction Site Safety and Health Hazards September 25, 2013
SMACNA Online Supervisor Safety Course Construction Site Safety and Health Hazards September 25, 2013 Jim Boom Directorate of Construction Occupational Safety and Health Administration SMACNA Webinar Safe
The Total Cost of Risk
1 I The Total Cost of Risk Risk Management? Safety (prevention)» Reduce/Eliminate the FREQUENCY of exposure» Reduce / Eliminate the SEVERITY of potential hazardous outcomes. Worker s Compensation» Claims
General and Excess Liability Limit Summary (limits are combined for illustration purposes):
General and Excess Liability Limit Summary (limits are combined for illustration purposes): Limit of Liability per Occurrence $2,000,000 Policy Aggregate per Location $6,000,000 Products/Completed Operations
WORK HEALTH AND SAFETY REFRESHER
WORK HEALTH AND SAFETY REFRESHER LEARNING OUTCOMES Advice regarding legislative duties, rights and obligations WHSMS implementation and maintenance Identifying hazards; assessing risks; and developing,
Contractor Information
Contractor Information Contractor Induction Program Table of Contents Introduction... 1 Contractor Occupational Safety and Health Management Systems... 2 Safety Orientation Sessions for Contractors Employees...
INJURY PREVENTION & PRE-LOSS CONTROLS A Paradigm Shift In Workers Compensation. October Sponsored by:
& PRE-LOSS CONTROLS A Paradigm Shift In Workers Compensation October 2011 Sponsored by: INJURY PREVENTION & PRE-LOSS CONTROLS A Paradigm Shift In Workers Compensation Workers compensation was conceived
BURNET COUNTY ACCIDENT PREVENTION PLAN & SAFETY POLICY
BURNET COUNTY ACCIDENT PREVENTION PLAN & SAFETY POLICY TABLE OF CONTENTS MANAGEMENT COMPONENT... 1 Safety Policy Statement Safety Committee Members Authority and Accountability Statement RECORDKEEPING
Labor Law Regulation Part 60 Pursuant to Section 134 of the Workers. Compensation Law as amended by Chapter 6 of the Laws of 2007
DRAFT as of 08/25/08 Labor Law Regulation Part 60 Pursuant to Section 134 of the Workers Compensation Law as amended by Chapter 6 of the Laws of 2007 PART 60 WORKPLACE SAFETY AND LOSS PREVENTION INCENTIVE
Contractor Safety Executive Initiative to Industry-Wide Program. Continuing Education Credits. Sunday, October 13, Contractor Safety Program
Contractors Safety Initiative October 13, 9:00 AM 9:50 AM Following this session, you will be able to: Discuss how electrical utilities address safety and health requirements. Identify subcontractor evaluation
Instructions for Investigation Report
1. COMPANY 2. DEPARTMENT 3. LOCATION OF INCIDENT 4. DATE OF INCIDENT 5. TIME A AM PM 6. DATE OF REPORT INJURY OR ILLNESS PROPERTY DAMAGE OTHER INCIDENTS IDENTIFYING INFORMATION 7. INJURED S NAME 13. PROPERTY
Beyond Traditional Lagging Indicators. Jorge E. Cortés, HSE Manager for International Operations Helmerich & Payne International Drilling Co.
Beyond Traditional Lagging Indicators Jorge E. Cortés, HSE Manager for International Operations Helmerich & Payne International Drilling Co. Presentation Objectives To challenge traditional measure of
Section 6: Incident Reporting & Investigation
2012 Section 6: Incident Reporting & Investigation Total Oilfield Rentals LP 10/1/2012 This page left blank intentionally. 6.0. Incident Reporting & Investigation Rev B October 1, 2012 Table of Contents
CONTRACTOR SAFETY QUALIFICATION PACKET
Page 1 of 8. COMPANY DATA 1. Company Name: Subsidiary/Division of: Local Address: Headquarters Address: (If different from local). Contact Name/Title: Telephone No.: Email Address: FAX No.: Local Address:
IC ARTICLE 13. HEALTH MAINTENANCE ORGANIZATIONS
IC 27-13 ARTICLE 13. HEALTH MAINTENANCE ORGANIZATIONS IC 27-13-1 Chapter 1. Definitions IC 27-13-1-1 Applicability of definitions Sec. 1. The definitions in this chapter apply throughout this article.
KENNECOTT UTAH COPPER SITE SPECIFIC TERMS For purposes of these Site Specific Terms, (a) the term Company means Kennecott Utah Copper LLC; (b) the
KENNECOTT UTAH COPPER SITE SPECIFIC TERMS For purposes of these Site Specific Terms, (a) the term Company means Kennecott Utah Copper LLC; (b) the term Supplier means the supplier, service provider or
Illinois Association of Aggregate Producers Safety Conference Working with Contractors: MSHA Compliance Requirements and Strategies
April 10, 2018 Illinois Association of Aggregate Producers Safety Conference Working with Contractors: MSHA Compliance Requirements and Strategies Nicholas W. Scala, Esq., CMSP Chair, MSHA Practice Group
SUBCONTRACTOR PREQUALIFICATION APPLICATION GENERAL INFORMATION
Date of Response: Company name: SUBCONTRACTOR PREQUALIFICATION APPLICATION GENERAL INFORMATION DBA: Phone: E-mail: Main Office Address: State: ZIP Code: Website: Sole Proprietorship: Partnership: Corporation:
UTCANJ OSHA. Construction Industry Safety Partnership
UTCANJ OSHA Construction Industry Safety Partnership September 24, 2011 23 1 Executive Summary 1.1 The goal of this program is to develop a statewide industry partnership between the construction industry,
Short Term Disability and Long Term Disability Insurance Plans
S U M M A R Y P L A N D E S C R I P T I O N L3 Technologies, Inc. Short Term Disability and Long Term Disability Insurance Plans Effective January 1, 2017 Table of Contents The Short Term Disability and
New Risk Management Techniques The Way Forward EDUARDO DUERI JLT Aerospace Latam MAY 2017
New Risk Management Techniques The Way Forward EDUARDO DUERI JLT Aerospace Latam MAY 2017 SETTING THE RECORD BASIC CONCEPTS 2 Hazard? 3 Hazards Hazard - A condition or an object with the potential to cause
A Bill Regular Session, 2017 HOUSE BILL 1460
Stricken language would be deleted from and underlined language would be added to present law. Act of the Regular Session 0 State of Arkansas st General Assembly As Engrossed: H// H// H// A Bill Regular
SUBCONTRACTOR Pre-Qualification Form
Please complete the form below and email (form and all attachments) to Jodi Huntoon at jhuntoon@stevensconstructioninc.com or fax to 239-936-9010. If all information is not provided and all attachments
Risk Management Performance Metrics for Manufacturers Managing Employee Capital
Hanover Manufacturers Advantage Risk Management Performance Metrics for Manufacturers Managing Employee Capital Maintaining consistent and efficient throughput is crucial to any manufacturers bottom line.
1.3 All employees are equally responsible for complying with the Ontario Occupational Health & Safety Act and its Regulations.
Revision No: 1 Page: 1 of 14 1.0 PURPOSE 1.1 The purpose of this policy is to establish guidelines for contractors in order to provide and maintain a safe work environment for all employees. Advance planning
WORK INTEGRATED LEARNING (WIL) PROGRAM STUDENT PLACEMENT AGREEMENT. This agreement is made on the day of 20..
WORK INTEGRATED LEARNING (WIL) PROGRAM STUDENT PLACEMENT AGREEMENT This agreement is made on the day of 20.. BETWEEN Monash University, through its Faculty of Business and Economics ( the Faculty ) of
The University of North Texas at Dallas Policy Manual Chapter
The University of North Texas at Dallas Policy Manual Chapter 12.000 12.004 Risk Management Campus Safety & Security Policy Statement. The University is committed to protecting and conserving university
UC Irvine Environmental Health & Safety TITLE: Driver Safety Program
SECTION: UC Irvine Environmental Health & Safety TITLE: Driver Safety Program INITIATOR: Dave Mori/Sandra Conrrad (revision) REVISION DATE 08/26/2016 1. Program Description 2. Scope 3. Definitions 4. Responsibilities
RFP No Attachment No. 1 Company Overview
00 01 21-1 REQUEST FOR COMPETITIVE SEALED PROPOSALS The University of Texas Medical Branch at Galveston Project Name: Alumni Field House Roof Coating RFP No.: 19-002 1a. CONTRACTOR LEGAL NAME/BUSINESS
San Antonio Water System PROJECT CONSTRUCTION PROGRAM HEALTH AND SAFETY PROGRAM
PROJECT CONSTRUCTION PROGRAM HEALTH AND SAFETY PROGRAM SEPTEMBER 2007 TABLE OF CONTENTS INTRODUCTION... 2 SAFETY RESPONSIBILITIES, AUTHORITY AND ACCOUNTABILITY... 3 REGULATORY AGENCIES... 3 SAWS... 4
Hazard Identification, Risk Assessment and Control Procedure
Hazard Identification, Risk Assessment and Control Procedure 1. Purpose To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage workplace and
Serious Injury & Fatality Reduction Initiative. Kenneth R Frazier American Electric Power
Serious Injury & Fatality Reduction Initiative Kenneth R Frazier American Electric Power Serious Injury and Fatality Reduction Initiative Over the years S&H efforts have been based on the Heinrich triangle.
Accident/Incident Reporting and Investigation Procedure
Epping Forest Schools Partnership Trust Unlocking the Potential of Collaboration Accident/Incident Reporting and Investigation Procedure This policy was approved by the Board of Trustees in: February 2019
The Risk Manager is responsible for the development of an appropriate safety program.
Employee injury is costly in terms of medical attention, disability and individual human loss. Serious injury resulting in time away from work, permanent disability or even death is a function of the interaction
Risk assessment Policy and Procedures
Risk assessment Policy and Procedures 1. Introduction The purpose of risk assessment is to identify hazards and evaluate any associated risks to health and safety arising from Youth Works activities, enabling
San Antonio Water System Standard Specifications for Construction
ITEM NO. 902 Construction Safety And Health Program 902.1 DESCRIPTION: This item shall govern the preparation and implementation of the contractor s Constuction Safety and Health Program for the specified
Table of Contents* *As an information tool, the Table of Contents includes Pre-Loss Planning and Post-Loss Implementation Chapters.
Table of Contents* *As an information tool, the Table of Contents includes Pre-Loss Planning and Post-Loss Implementation Chapters. Mastering Workers Comp Costs Volume I: Pre-Loss Planning Chapter 1: Workers
Contractor Health and Safety Code of Practice. Updated June 4, 2018
Contractor Health and Safety Code of Practice 2018 Updated June 4, 2018 Updated June 4, 2018 TABLE OF CONTENTS A. DEFINITIONS...3 B. PURPOSE...7 C. STRATEGIC ALIGNMENT...7 D. REGULATORY CONSIDERATIONS...7
Risk Assessment Policy (Trust, Summer, Senior and Prep School & EYFS)
Risk Assessment Policy (Trust, Summer, Senior and Prep School & EYFS) Introduction St Bede s School Trust (hereafter referred to as Bede s) clearly recognises that a failure to take reasonable safety precautions
OCCUPATIONAL HEALTH & SAFETY THE CARING CLIENT IMPLEMENTATION OF THE NATIONAL OHS STRATEGY
Implementation of the National OHS Strategy 2002 2012 Wayne Artuso OCCUPATIONAL HEALTH & SAFETY THE CARING CLIENT Case Study IMPLEMENTATION OF THE NATIONAL OHS STRATEGY 2002-2012 Wayne Artuso Executive
(Last amended 18 December 2017, cf. page 4)
REGULATIONS RELATING TO MANAGEMENT AND THE DUTY TO PROVIDE INFORMATION IN THE PETROLEUM ACTIVITIES AND AT CERTAIN ONSHORE FACILITIES (THE MANAGEMENT REGULATIONS) (Last amended 18 December 2017, cf. page
Shared Sick Leave Program
Shared Sick Leave Program Faculty and Unclassified Staff Southeastern Louisiana University is participating in a Shared Sick Leave Program to be used by the fellow faculty and/or unclassified employees.
Welcome! OSHA & Workers Compensa6on Seminar. February 28, 2013
Welcome! OSHA & Workers Compensa6on Seminar February 28, 2013 Objective OSHA regulations for small business OSHA training requirements for small business OSHA inspections & citations Managing employee
Risk Management Framework. Metallica Minerals Ltd
Risk Management Framework Metallica Minerals Ltd Risk Management Framework 23 March 2012 Table of Contents Contents 1. Introduction... 3 2. Risk Management Approach... 3 3. Roles and Responsibilities...
Risk Assessment Procedure
1. Introduction Risk Assessment Procedure 1.1 The Management of Health and Safety at Work Regulations 1999 set out general duties which apply to employers and are aimed at improving health and safety management.