2J9547a CELLULAR/LTE MIMO and 2.4/5.0 GHz ISM MIMO Mast Mount

2J7068BGa-915 CELLULAR/LTE MIMO, 2.4/5.0 GHz ISM, 915 MHz ISM and GNSS

Product Datasheet 2J768BGa-915 CELLULAR/LTE MIMO, 2.4/5. GHz ISM, 915 MHz ISM and GNSS Key Features Cable 1 and 2: CELLULAR / LTE Cable 3: 2.4/5. GHz ISM Cable 4: 915 MHz ISM Cable 5: GPS/GLONASS/QZSS/Galileo

2J4A50PCFa 2 4G LTE/3G/2G MIMO, 2 2.4/5.0 GHz ISM MIMO and GNSS Adhesive Mount

Product Datasheet 2J4A5PCFa 2 4G LTE/3G/2G MIMO, 2 2.4/5. GHz ISM MIMO and GNSS Adhesive Mount Key Features Cable 1 and 2: 4G LTE/3G/2G - 698-96 MHz - 171-217 MHz - 25-27 MHz Cable 3 and 4: 2.4/5. GHz

SPECIFICATION. : 2 x 4G/3G/2G MIMO Antenna (698~960MHz, 1710~2170MHz,2300~2700MHz, MHz) MIMO1 antenna MIMO2 antenna

SPECIFICATION Part No. Product Name Feature : MA761.B.BICG.003 : Pantheon Antenna 4in1 MA761 Screw-Mount [Permanent Mount] 4G/3G/2G MIMO/ 2.4/5GHz MIMO : 2 x 4G/3G/2G MIMO Antenna (698~960MHz, 1710~2170MHz,2300~2700MHz,

SPECIFICATION. Product Name : 4G/3G/2G Cellular Hinged SMA(M) Mount Monopole

SPECIFICATION Part No. : TG.9.113 Product Name : 4G/3G/2G Cellular Hinged SMA(M) Mount Monopole Feature : 7MHz to 38MHz LTE*/GSM/CDMA/HSPA/UMTS 7*/85/9/17/18/19/21/23/35/37 Rotatable hinge design for optimal

SPECIFICATION. Product Name : Dual-Band WiFi 2.4~2.5GHz/5.15~5.85GHz Terminal Mount Monopole Antenna

SPECIFICATION Part No. : GW.05.0153 Product Name : Dual-Band WiFi 2.4~2.5GHz/5.15~5.85GHz Terminal Mount Monopole Antenna Features : High Efficiency with and without groundplane WiFi/Bluetooth/igbee Extremely

MIMO LTE+MIMO Dual Band GHz+GNSS

Tracking Solutions Embedded Antenna design GPS&Wireless solutions Provider MIMO Combo Antenna MODEL: AW-10 V1.0 2013-11-29 MIMO LTE+MIMO Dual Band 2.4-5.0GHz+GNSS Overview: The AW-10 is the multi-band

2.4 GHz. Description. Order Number. Specification. Value. Gain Impedance Type Polarization VSWR Frequency Weight Size Antenna Color

2.4 GHz 2.5 GHz Dipole 2dBi Antenna for Reverse Polarity SMA ORDERING INFORMATION Order Number Description SPECIFICATIONS 1-11 2.4 GHz dipole antenna for reverse polarity SMA connector. Specification Gain

DATASHEET AMOTECH. Application

Document Datasheet Type Chip Antenna Application ISM 868/915MHz Part No. AMAN9001ST05 Revision 4.0 DATASHEET Application ISM 868/915 MHz Features Monopole Structure Size (9.0*.0*1.mm ) Performance Optimizing

MA-203 Stingray GPS/Cellular Glassmount Covert Antenna

MA-23 Stingray GPS/Cellular Glassmount Covert Antenna 3D view top view (this side faces the sky) underside view (this side faces the passenger) This is a combination high performance GPS and Quad-band

Radio Propagation Modelling

Radio Propagation Modelling Ian Wassell and Yan Wu University of Cambridge Computer Laboratory Why is it needed? To predict coverage between nodes in a wireless network Path loss is different from environment

Multilayer Band Pass Filters

Multilayer Band Pass Filters For 5.GHz W-LAN DEA Series Type: DEA25425BT-29B2 (2..25.9mm) DEA25437BT-2 (2..25.9mm) DEA25375BT-254A (2..25.95mm) DEA25425BT-228A4 (2..25.95mm) Issue date: November 2 Conformity

Multilayer Band Pass Filters

Multilayer Band Pass Filters For.GHz W-LAN/Bluetooth DEA Series Type: DEABT-6A (...mm) DEABT-6A (...7mm max.) DEABT-B (...8mm max.) DEABT-C (...9mm) DEABT-7A (...9mm) DEABT-8A (...9mm) DEABT-8A (...mm

(loss < 1 db) (loss 3 db) (loss > 20 db) (loss > 40 db) typical frequency response DC (db) x σ RETURN LOSS. at RF level of 0 dbm

Coaxial Low Pass Filter 5Ω Maximum Ratings DC to 7 MHz Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power Input.5W max. Permanent damage may occur if any of these limits are exceeded.

http://www.tekfun.com.tw/icm.php - Introduction - Tekfun Co., Ltd. has been manufacturing and exporting various Antennas and RF products since 1990. Taking advantage of our own professional Antenna Chamber,

Insertion loss (db) TOP VIEW SIDE VIEW BOTTOM VIEW. 4x ± ± Orientation Marker Denotes Pin Location 4x 0.

Model DC4759J52AHF Ultra Low Profile 85 2dB Directional Coupler Description The DC4759J52AHF is a low cost, low profile sub-miniature high performance 2 db directional coupler in an easy to use RoH compliant,

July Multilayer Diplexer. For MHz / MHz DPX202700DT-4062A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]

R F C o m p o n e n t s July 15 Multilayer Diplexer For 698-96MHz / 17-27MHz DPX27DT-462A1 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 698-96MHz / 17-27MHz Conformity to RoHS

August Multilayer Diplexer. For MHz / MHz DPX165950DT-8144A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

R F C o m p o n e n t s August 15 Multilayer Diplexer For 74-161MHz / -59MHz DPX1659DT-8144A1 1.6x.8mm [EIA 63]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 74-161MHz / -59MHz Conformity to RoHS

July Multilayer Diplexer. For MHz / MHz DPX162170DT-8122B1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

R F C o m p o n e n t s July 15 Multilayer Diplexer For 824-96MHz / 17-217MHz DPX16217DT-8122B1 1.6x.8mm [EIA 63]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 824-96MHz / 17-217MHz Conformity to

October Multilayer Diplexer. For MHz / MHz DPX165950DT-8030D1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]

R F C o m p o n e n t s October 15 Multilayer Diplexer For 791-269MHz / 49-595MHz DPX16595DT-83D1 1.6x.8mm [EIA 63]* * Dimensions Code JIS[EIA] Multilayer Diplexer For 791-269MHz / 49-595MHz Conformity

SAW FILTER FOR RKE Murata part number :SAFBC315MSP0T00

AUTOMOTIVE SAW FILTER FOR RKE Package Dimensions Top View Specification Item Nominal Center Frequency(fc) Specification -4 to +125 C typ. 315. MHz Dot Marking(φ.5) Bottom View (.1) 3.±.2 Q N (3) (4) (1).75±.2

VAC, 50/60 Hz. -25 C to 65 C. Bluetooth Low Energy dBm. +5dBm. 1Mbit/s (2Mbit/s) 128 bit AES b/g/n

SPECIFICATION SHEET BLUFI VER 1.3 HARDWARE SPECIFICATION AC Input AC Plugs 100-240 VAC, 50/60 Hz US type: NEMA 1-15 ungrounded (Type A) European: CEE 7/16 "Europlug" (Type C) British Standard BS 1363 (Type

Propagation Path Loss Measurements for Wireless Sensor Networks in Sand and Dust Storms

Frontiers in Sensors (FS) Volume 4, 2016 doi: 10.14355/fs.2016.04.004 www.seipub.org/fs Propagation Path Loss Measurements for Wireless Sensor Networks in Sand and Dust Storms Hana Mujlid*, Ivica Kostanic

Designing with an Inverted-F PCB Antenna

Page 1 Application Note 5052 24 April 2008 Designing with an Inverted-F PCB Antenna For the EM250 and EM2 Platforms This document describes an Inverted-F PCB antenna designed by Ember for use with both

Link Budget Calculation. Ermanno Pietrosemoli Marco Zennaro

Link Budget Calculation Ermanno Pietrosemoli Marco Zennaro Goals To be able to calculate how far we can go with the equipment we have To understand why we need high masts for long links To learn about

Broadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX, SATELLITE IF

Flat Gain, High IP3 Monolithic Amplifier 50Ω 0.01 to 6 GHz The Big Deal Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Flat Gain Broadband High Dynamic Range without external

QML35. Cover. Voltage A = 5V (+/- 5%) B = 3.3V (+/- 5%)

QML35 DESIGN FEATURES Bearingless modular design Low profile assembled height Resolutions up to 8192 lines per revolution 4, 6, 8 or 10 pole commutation Easy lock-n-twist assembly feature Through shaft

3.6V / 2600mAh Primary Lithium x 0.85 (6 cm x 2.1 cm) 1.0 oz (28 gr) -25 C to 65 C. Bluetooth Low Energy dbm.

SPECIFICATION SHEET ibeek VER 1.3 HARDWARE SPECIFICATION Battery Size Weight Temperature Range Bluetooth Type Bluetooth Sensitivity Bluetooth Max Power Output Bluetooth Antena Bluetooth Frequency Bluetooth

K BAND SUPER LOW NOISE AMPLIFIER N-CHANNEL HJ-FET. Drop-In Replacement: CE3520K3. Part Number Order Number Package Quantity Marking Supplying Form

FEATURES Super low noise figure and high associated gain HETERO JUNCTION FIELD EFFECT TRANSISTOR K BAND SUPER LOW NOISE AMPLIFIER N-CHANNEL HJ-FET NF = 0.75 db TYP., Ga = 10 db TYP. @ f = 20 GHz Micro-X

RDP-272+ DC to 2700 MHz (DC-950, MHz) The Big Deal Low insertion loss High isolation Miniature shielded package.

Surface Mount Diplexer 5Ω DC to 27 MHz (DC-95, 17-27 MHz) The Big Deal Low insertion loss High isolation Miniature shielded package CASE STYLE: CK65 Product Overview is a low-pass + high-pass combination

3.6V / 2600mAh Primary Lithium x 0.85 (60mm x 21mm) 1.0 oz (28 gr) -30 C to +77 C. Bluetooth Low Energy dBm. +5dBm. 1Mbit/s / 2Mbit/s*

SPECIFICATION SHEET BEEKs Industrial VER 1.6 HARDWARE SPECIFICATION Battery Size Weight Temperature Range Bluetooth Type Bluetooth Sensitivity Bluetooth Max Power Output Bluetooth Antenna Frequency Supported

AN021: RF MODULES RANGE CALCULATIONS AND TEST

AN021: RF MODULES RANGE CALCULATIONS AND TEST We Make Embedded Wireless Easy to Use RF Modules Range Calculation and Test By T.A.Lunder and P.M.Evjen Keywords Definition of Link Budget, Link Margin, Antenna

QM35. Cover. Output. A = Line Driver B = Line Driver (ABZ) /Open Collector (UVW) C = Dual Votage Line Driver (ABZ)/ Open Collector (UVW)

QM35 DESIGN FEATURES Bearingless modular design Low profile assembled height Resolutions up to 8192 lines per revolution 4, 6, 8 or 10 pole commutation Easy lock-n-twist assembly feature Through shaft

Monolithic Amplifier CMA-162LN+ Ultra Low Noise, High IP to 1.6 GHz

Ultra Low Noise, High IP3 Monolithic Amplifier 50Ω 0.7 to 1.6 GHz The Big Deal Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Low Noise Figure, 0.5 db High Gain, High IP3

APPLICATION FORM: Authorization for the installing, maintaining and operating of a VSAT network. REVENUE STAMP OF NAF. 10

Authorization for the installing, maintaining and operating of a VSAT network. REVENUE STAMP OF NAF. 10 1 GENERAL INFORMATION The application for the authorization for installing, maintaining and operating

at 1:00 P.M at 4.00 P.M.

No. TEQIP-PRJ-97-8-9 Date: 5.0.08 NOTICE INVITING TENDER Subject: Invitation for quotations for supply of Goods. Indian Institute of Technology (Indian School of Mines),Dhanbad invites quotations for the

Type 778P/779P, Orange Drop, Polypropylene Film/Foil Capacitors

Type 778P/779P Orange Drop 400 Volts A-C Polypropylene Film/Foil Capacitors Features Specifically designed for A-C voltage applications where corona free operation is required for high reliability. Extremely

BLF7G20L-160P; BLF7G20LS-160P

BLF7G20L-160P; BLF7G20LS-160P Rev. 01 22 June 2010 Objective data sheet 1. Product profile 1.1 General description 160 W LDMOS power transistor for base station applications at frequencies from 1800 MHz

IEEE g (54Mbps) mini PCI Wireless LAN Module

XG-603 mpci WLAN Module IEEE 802.11g (54Mbps) mini PCI Wireless LAN Module Z comax Technologies, Inc. has released its new line of Air Runner wireless LAN mini-pci cards. The XG-603 is an IEEE 802.11g

Statistical Analysis of On-body Radio Propagation Channel for Body-centric Wireless Communications

374 PIERS Proceedings, Stockholm, Sweden, Aug. 12 15, 2013 Statistical Analysis of On-body Radio Propagation Channel for Body-centric Wireless Communications H. A. Rahim 1, F. Malek 1, N. Hisham 1, and

Path Loss Models and Link Budget

Path Loss Models and Link Budget A universal path loss model P r dbm = P t dbm + db Gains db Losses Gains: the antenna gains compared to isotropic antennas Transmitter antenna gain Receiver antenna gain

Features rugged welded case, hermetic other standard and custom PLP models available with wide selection of fco

Plug-In Low Pass Filter 5Ω Maximum Ratings DC to 15 MHz Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power Input.5W max. Permanent damage may occur if any of these limits are

Features rugged welded case, hermetic other standard and custom PLP models available with wide selection of fco

Plug-In Low Pass Filter 5Ω Maximum Ratings DC to 1 MHz Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power Input.5W max. Permanent damage may occur if any of these limits are exceeded.

LTE RF Planning Training LTE RF Planning, Design, Optimization Training

LTE RF Planning Training LTE RF Planning, Design, Optimization Training Why should you choose LTE RF Planning Training? LTE RF Planning Training is focused on carrying out RF planning and Design and capacity

SYMBOL TYPE NUMBER VALUE UNIT. Power dissipation at Tamb = 60 ºC 1.5 W. Non repetitive peak zener dissipation (t = 10ms) 40 W

DO-204AL (DO-41) Voltage Power Dissipation 10 to 200 V 1.5 W Maximum Ratings and Electrical Characteristics at 25 C FEATURE Glass passivated chip junction Hiperectifier structure for high reliability Cavity-free

Monolithic Amplifier CMA-84+ Wideband, High Dynamic Range, Ceramic. DC to 7 GHz. The Big Deal

Wideband, High Dynamic Range, Ceramic Monolithic Amplifier Ω DC to 7 GHz The Big Deal Ceramic, hermetically sealed, nitrogen filled Low profile case,.4 High IP3, +38 dbm High Gain, 24 db High POUT, +21

EELE 5414 Wireless Communications. Chapter 4: Mobile Radio Propagation: Large-Scale Path Loss

EELE 5414 Wireless Communications Chapter 4: Mobile Radio Propagation: Large-Scale Path Loss In the last lecture Outline Diffraction. Scattering. Practical link budget design. Log-distance model Log-normal

Optimization of Base Station Location in 3G Networks using Mads and Fuzzy C-means

Optimization of Base Station Location in 3G Networks using Mads and Fuzzy C-means A. O. Onim 1* P. K. Kihato 2 S. Musyoki 3 1. Jomo Kenyatta University of Agriculture and Technology, Department of Telecommunication

4. Absolute Maximum Ratings (Note) (Unless otherwise specified, T a = 25 ) Symbol. Note. V RM V R I O I FSM T j T stg.

Schottky Barrier Diode CCS15S30 Silicon Epitaxial CCS15S30 1. Applications High-Speed Switching 2. Features (1) Low forward voltage: V F (1) = 0.33 V (typ.) 3. Packaging and Internal Circuit 1: Cathode

TOSHIBA Field Effect Transistor Silicon N Channel MOS Type RFM07U7X

RFMUX TOSHIBA Field Effect Transistor Silicon N Channel MOS Type RFMUX VHF- and UHF-band Amplifier Applications (Note)The TOSHIBA products listed in this document are intended for high frequency Power

VHF variable capacitance diode

Rev. 4 6 September 2011 Product data sheet 1. Product profile 1.1 General description The is a variable capacitance diode, fabricated in planar technology and encapsulated in the SOD323 (SC-76) very small

TOSHIBA Transistor Silicon NPN Epitaxial Planar Type 2SC5086. Characteristics Symbol Test Condition Min Typ. Max Unit

TOSHIBA Transistor Silicon NPN Epitaxial Planar Type 2SC5086 VHF~UHF Band Low Noise Amplifier Applications Unit: mm Low noise figure, high gain. NF = 1.1dB, S 21e 2 = 11dB (f = 1 GHz) Absolute Maximum

TOSHIBA Transistor Silicon NPN Epitaxial Planar Type 2SC5066. Characteristics Symbol Test Condition Min Typ. Max Unit

TOSHIBA Transistor Silicon NPN Epitaxial Planar Type 2SC5066 VHF~UHF Band Low Noise Amplifier Applications Unit: mm Low noise figure, high gain. NF = 1.1dB, S 21e 2 = 12dB (f = 1 GHz) Absolute Maximum

4. Absolute Maximum Ratings (Note) (Unless otherwise specified, T a = 25 ) Symbol. Note. V RM V R I FM I O P D I FSM T j T stg

Switching Diodes 1SS302A Silicon Epitaxial Planar 1SS302A 1. Applications Ultra-High-Speed Switching 2. Features (1) Fast reverse recovery time : t rr = 1.6 ns (typ.) (2) AEC-Q101 qualified 3. Packaging

MAINLINE LOSS (db) DIRECTIVITY (db) LB MB UB TYP/MIN TYP/MIN TYP/MIN LB MB UB TYP/MAX TYP/MAX TYP/MAX

DIRECTIONAL SURFACE-MOUNT /MAX /MAX /MAX /MIN /MIN /MIN 133 147 9.8 + 0.8 10-2000 ± 1.0 1.6/2.2 1.7/2.3 2.4/3.0 18/13 22/15 17/13 1.3:1 152 5 SDC-C7 10.5 + 1.0 0.5-500 ± 0.7 1.0/1.4 0.8/1.4 1.0/1.6 28/23

3M Pin Strip Header.100 and Straight and Right Angle, Solder Tail 2300 Series

and Straight and Right Angle, Solder Tail 2300 Series One and two row versions Straight and right angle versions Tin lead or gold plating available Tapered tip does not cut the socket wipe during insertion,

DISCRETE SEMICONDUCTORS DATA SHEET

DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D252 BGY687 600 MHz, 21.5 db gain push-pull amplifier Supersedes data of 1995 Sep 11 2001 Nov 08 FEATURES Excellent linearity Extremely low noise Silicon

An Investigation on the Use of ITU-R P in IEEE N Path Loss Modelling

Progress In Electromagnetics Research Letters, Vol. 50, 91 98, 2014 An Investigation on the Use of ITU-R P.1411-7 in IEEE 802.11N Path Loss Modelling Thiagarajah Siva Priya, Shamini P. N. Pillay *, Manogaran

ECE 5325/6325: Wireless Communication Systems Lecture Notes, Spring 2013

ECE 5325/6325: Wireless Communication Systems Lecture Notes, Spring 2013 Lecture 5 Today: (1) Path Loss Models (revisited), (2) Link Budgeting Reading Today: Haykin/Moher handout (2.9-2.10) (on Canvas),

ITRAINONLINE MMTK RADIO LINK CALCULATION HANDOUT

ITRAINONLINE MMTK RADIO LINK CALCULATION HANDOUT Developed by: Sebastian Buettrich, wire.less.dk Edited by: Alberto Escudero Pascual, IT +46 Table of Contents 1. About this document...1 1.1 Copyright information...2

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

SMT Aluminum Electrolytic Capacitors - General Purpose, General Purpose Filtering, Bypassing, Power Supply Decoupling Type AVS Capacitors are the best value for filter and bypass applications not requiring

PHOTO DIODE NR6800 Series

PHOTO DIODE NR6800 Series 80 m InGaAs AVALANCHE PHOTO DIODE FOR OTDR APPLICATIONS DESCRIPTION The NR6800 Series is an InGaAs avalanche photo diode, and can be used in OTDR systems. FEATURES Small dark

Fibre Passive Devices

AFL manufacture a comprehensive portfolio of fibre passive devices (FPD) and associated enclosures to suit a range of applications including FTTx, CATV, LAN and telecommunications networks. FPD s are available

Coverage Planning for LTE system Case Study

Coverage Planning for LTE system Case Study Amer M. Daeri 1, Amer R. Zerek 2 and Mohammed M. Efeturi 3 1 Zawia University. Faculty of Engineering, Computer Engineering Department Zawia Libya Email: amer.daeri@

Monolithic Amplifier CMA-83LN+ Low Noise, Wideband, High IP3. 50Ω 0.5 to 8.0 GHz

Low Noise, Wideband, High IP3 Monolithic Amplifier 50Ω 0.5 to 8.0 GHz The Big Deal Ceramic, hermetically sealed, nitrogen filled Low profile case, 0.045 Flat gain over wideband Low noise figure, 1.3 db

Real-Time Path Loss Modelling for a More Robust Wireless Performance

Real-Time Path Loss Modelling for a More Robust Wireless Performance Q. Braet 1, D. Plets 1, W. Joseph 1, L. Martens 1 1 Information Technology Department, Ghent University/iMinds Gaston Crommenlaan 8,

IMPROVED PRODUCT VCS331, VCS332

Bulk Metal Foil Technology High Precision 4-Terminal Power Current Sensing Resistors with TCR as low as ± 1 ppm/ C Maximum, Tolerance ± 0.1 % and Rise Time 1.0 ns Effectively No Ringing INTRODUCTION The

3M Shunt 2.54 mm 969 Series

3M Shunt 2.54 mm 969 Series Open type See Regulatory Information Appendix for chemical compliance information Date Modified: February 16, 2009 TS-2186-C Sheet 1 of 2 Physical Insulation Material: PBT Thermoplastic

Type AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life

SMT Aluminum Electrolytic Capacitors -55 C to +5 C - Long Life Long Life Filtering, Bypassing, Power Supply Decoupling Type AHA Capacitors deliver twice the life of many SMT aluminum capacitor types, and

TOSHIBA Transistor Silicon NPN Epitaxial Type TMBT3904

TOSHIBA Transistor Silicon NPN Epitaxial Type TMBT3904 Audio Frequency General Purpose Amplifier Applications High voltage and high current : VCEO = 50 V, IC = 150 ma (max) Complementary to TMBT3906 Absolute

3M D Sub EMI Junction Shell Shielded Flat Cable

3M D Sub EMI Junction Shell Shielded Flat Cable Stainless steel inserts in plastic shell provide EMI/ ESD protection for shielded flat cable Uses standard hardware Light weight, compact size Low profile

SERIES 2000 STICK ANTENNA

Not Recommended for New designs RI-ANT-S01C, RI-ANT-S02C SERIES 2000 STICK ANTENNA SCBS851 DECEMBER 2002 REVISED DECEMBER 2005 FEATURES Best in Class Performance Through Patented HDX Technology IP 64+

Type AXLH -40 ºC to +150 ºC High Performance Axial Leaded Aluminum Electrolyic Capacitors

High Performance Axial Leaded Aluminum Electrolyic Capacitors Type AXLH capacitors are a new generation of high performance aluminum electrolytic capacitors rated up to 2000 hours at 150 ºC. They are designed

SRR4818A Series - Shielded Power Inductors

*RoHS COMPLIANT & AEC APPROVED Features n Shielded construction n Inductance range: 1 to 47 µh n Heating current up to 5.1 A n AEC-Q2 qualified n RoHS compliant* and halogen free** Applications n Automotive

3M Serial Advanced Technology Attachment (SATA) Connector Host Receptacle, Vertical and Right Angle, Std Height, Surface Mount Receptacle 5622 Series

M Serial Advanced Technology Attachment (SATA) Connector 22-position signal and power combination Input/ouput connector for backplane applications EMLB contacts for "hot swap" Blind mate polarization for

145 V PTC Thermistors For Overload Protection

FEATURES Wide range of trip and non-trip currents: From 47 ma up to A for the non-trip current Small ratio between trip and non-trip currents (I t /I nt =.5 at 25 C) High maximum inrush current (up to

Path Loss Measurements for a Non-Line-of-Sight Mobile-to-Mobile Environment

Path Loss Measurements for a Non-Line-of-Sight Mobile-to-Mobile Environment J. Turkka, M. Renfors Abstract This paper shows results of narrowband path loss measurements in a typical urban and suburban

3M Serial Advanced Technology Attachment (SATA) Connector

M Serial Advanced Technology Attachment (SATA) Connector 22-position signal and power combination Input/ouput connector for backplane applications EMLB contacts for "hot swap" Blind mate polarization for

BAS70-00-V to BAS70-06-V

Small Signal Schottky Diodes, Single & Dual Features These diodes feature very low turn-on voltage and fast switching These devices are protected by a PN junction guard ring against excessive voltage,

Solid-Electrolyte TANTALEX Capacitors, Hermetically-Sealed, Axial-Lead

Solid-Electrolyte TANTALEX Capacitors, Hermetically-Sealed, Axial-Lead PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Tolerance:

TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC2712

TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT process) 2SC2712 Audio Frequency General Purpose Amplifier Applications Unit: mm High voltage and high current: V CEO = 50 V, I C = 150 ma (max) Excellent

UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C FORM 10-K. xg Technology, Inc.

UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark One) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended

ECE 5325/6325: Wireless Communication Systems Lecture Notes, Fall Link Budgeting. Lecture 7. Today: (1) Link Budgeting

ECE 5325/6325: Wireless Communication Systems Lecture Notes, Fall 2011 Lecture 7 Today: (1) Link Budgeting Reading Today: Haykin/Moher 2.9-2.10 (WebCT). Thu: Rap 4.7, 4.8. 6325 note: 6325-only assignment

NCR-80 NCR-80. IX C SD A H X A N A X X. Display. Connection. Housing. Version. Mounting. 1: Plastic 2: Thread 3: Metal

NCR-80 Display Mark if none Sample Sample NCR-80. I C SD A H A N A Display : - No Bindisc - No Window (1, 2, 3) A: A - Bindisc Top Mounted with Window (1, 2, 3) F: F - No Bindisc - With Window Top (2,

SRR4828A Series - Shielded Power Inductors

*RoHS COMPLIANT & AEC APPROVED 22 Features Shielded construction Inductance range: 1.2 to 22 µh Heating current up to 5 A AEC-Q2 qualified RoHS compliant* and halogen free** SRRA Series - Shielded Power

Recommended Land Pattern: [mm]

Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. 3 Inductance 10 khz/ 0.1 ma L. mh ±30% 1 4 Rated Current @ 70 C I R.75 A max. DC Resistance

Performance Evaluation of Hata-Davidson Pathloss Model Tuning Approaches for a Suburban Area

American Journal of Software Engineering and Applications 2017; 6(3): 93-98 http://www.sciencepublishinggroup.com/j/ajsea doi: 10.11648/j.ajsea.20170603.16 ISSN: 2327-2473 (Print); ISSN: 2327-249X (Online)

Improved performance with unique modular heat sink. Color 24v Current All Other Controls 365, 375, 385, 395, , 625 WHI, 455, 470, , 940

DL225 Series Square Coaxial Lights Product Highlights Consistent diffuse illumination Improved performance with unique modular heat sink and circuit design Broad range of wavelengths available Five Sizes

Investigating the Best Radio Propagation Model for 4G - WiMAX Networks Deployment in 2530MHz Band in Sub- Saharan Africa

Investigating the Best Radio Propagation Model for 4G - WiMAX Networks Deployment in 530MHz Band in Sub- Saharan Africa Awal Halifa Dep t of Electrical Engineering Kwame Nkrumah Univ. of Science and Technology

PACKAGE OPTION ADDENDUM

PACKAGE OPTION ADDENDUM www.ti.com 15-Apr-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp

3M Polarized Boardmount Socket.100".100" Centerbump Polarization with Straight Solder Tails 8500 Series

3M Polarized Boardmount Socket.100".100" Centerbump Polarization with Straight Solder Tails 8500 Series Centerbump polarization Mates with low profile shrouded headers Part number on each piece Optional

Optimization of Path Loss Models Based on Signal Level Measurements in 4G LTE Network in Sofia

Bulg. J. Phys. 44 (2017) 145 154 Optimization of Path Loss Models Based on Signal Level Measurements in 4G LTE Network in Sofia Ph. Atanasov, Zh. Kiss ovski Faculty of Physics, University of Sofia, 5 James

Commercial Thin Film Resistor, Surface Mount Chip

P-NS Commercial Thin Film Resistor, Surface Mount Chip For applications requiring low noise, stability, low temperature coefficient of resistance, and low voltage coefficient, all Vishay s proven precision

3M Mini Serial Attached SCSI (minisas) Connector Assembly Internal Right Angle Combo Connector

M Mini Serial Attached SCSI (minisas) Connector Assembly 8AB6 Series Capable of 6 Gbps per channel data rate Combination receptacle/shell assembly to facilitate board assembly Available with pre-positioning

PLC Splitter, Blockless Type 1xN, LIIN25 Features

PLC Splitter, Blockless Type 1xN, LIIN25 Features Good channel-to-channel uniformity High reliability and small size Low Insertion loss and Low PDL Compact Design Good channel-to-channel uniformity Wide

For a detailed datasheet and other design support tools, please contact

This device is designed specifically to power Intel processors under a strict disclosure agreement with Intel Corporation. The end user must have a current CNDA in place with Intel Corporation to access

xg Technology, Inc. (Exact name of registrant as specified in its charter)

UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 10-K (Mark One) ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended

To request a full data sheet, please send an to:

To request a full data sheet, please send an email to: display_contact@list.ti.com. PACKAGE OPTION ADDENDUM 11-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins

PACKAGE OPTION ADDENDUM

PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp

High Reliability Glass Epoxy Multi-layer Materials

Data Sheet High Reliability Glass Epoxy Multi-layer Materials Laminate R-1755C Prepreg R-1650C Jun. 2017 No.17061939 Specification / Laminate R-1755C No.; 17061939-1 Property Units Test Method Condition

Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V

Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V Jun. 2017 No.17061636 Specification / Laminate R-1755V No.; 17061636-1 Property Units