(loss < 1 db) (loss 3 db) (loss > 20 db) (loss > 40 db) typical frequency response DC (db) x σ RETURN LOSS. at RF level of 0 dbm

Transcription

1 Coaxial Low Pass Filter 5Ω Maximum Ratings DC to 7 MHz Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power Input.5W max. Permanent damage may occur if any of these limits are exceeded. Features good attenuation rate, 1.35 typ. 2dB/ 3dB BW ratio rugged shielded case other SLP models available with wide selection of cut-off frequencies Applications lab use test equipment video equipment PASSBAND Low Pass Filter Electrical Specifications fco Nom. STOPBAND (loss < 1 db) (loss 3 db) (loss > 2 db) (loss > 4 db) SLP-75 CASE STYLE: FF99 Connectors Model Price Qty. SMA SLP-75(+) $34.95 ea. (1-9) + RoHS compliant in accordance with EU Directive (22/95/EC) The +Suffi x identifi es RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifi cations. Passband Typ. VSWR (:1) Stopband Typ. DC Outline Drawing typical frequency response 4 db R F IN electrical schematic R F OUT 8 Outline Dimensions ( inch mm ) B D E wt grams at RF level of dbm INSERTION LOSS 5 AT T E NUAT ION, db at RF level of dbm 3 db 1 db 2 db DC F R E QUE NC Y / F co RETURN LOSS Typical Performance Data Frequency Insertion Loss Return Loss Frequency Group Delay (db) (db) _ x σ (nsec) at RF level of dbm GROUP DELAY INSERTION LOSS (db) RETURN LOSS (db) GROUP DELAY (nsec) FREQUENCY FREQUENCY FREQUENCY Mini-Circuits ISO 91 ISO 141 AS 91 CERTIFIED P.O. Box 35166, Brooklyn, New York (718) Fax (718) The Design Engineers Search Engine For detailed performance specs & shopping online see web site Provides ACTUAL Data Instantly at minicircuits.com IF/RF MICROWAVE COMPONENTS Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications and performance data contained herein are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at REV. A M98898 SLP

2 Coaxial Low Pass Filter Typical Performance Data FREQUENCY INSERTION LOSS RETURN LOSS FREQUENCY GROUP DELAY (db) (db) (nsec) REV. X Page 1 of 1

3 Coaxial Low Pass Filter Typical Performance Curves Insertion Loss 1 2 Insertion Loss (db) Frequency Return Loss 5 1 Return Loss (db) Frequency 5. Group Delay Group Delay (nsec) Frequency REV. X Page 1 of 1

4 Case Style Outline Dimensions FF FF56 FF99 CASE #. A B C D E WT GRAMS FF (11.68) (43.18) (7.92) FF (17.78) (5.29) Dimensions are in inches (mm). Tolerances: 2Pl. ±.3; 3Pl. ±.15 Notes: 1. Case material: Brass. 2. Case finish: Nickel plate. 98-FF Rev.: AP (1/9/18) M File: 98-FF.docx Sheet 2 of 2 This document and its contents are the property of Mini-Circuits.

5 Mini-Circuits Environmental Specifications ENV28 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 1 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to 1 C Ambient Environment Individual Model Data Sheet Barometric Pressure 1, Feet MIL-STD-22, Method 15, Condition D Humidity 9% RH, 65 C Units may require bake-out after humidity to restore full performance. MIL-STD-22, Method 13 Thermal Shock -65 to 125 C, 5 cycles MIL-STD-22, Method 17, Condition B Vibration (High Frequency) 2g peak, 1-2 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-22, Method 24, Condition D Mechanical Shock 1g, 6ms sawtooth, 3 shocks each direction 3 axes (total 18) MIL-STD-22, Method 213, Condition I ENV28 Rev: B 9/26/13 M File: ENV28.pdf This document and its contents are the property of Mini-Circuits. Page: 1