Communications Point Data Base for Serial and Ethernet Communications Protocol DNP3
|
|
|
- Irene Rose
- 6 years ago
- Views:
Transcription
1 Switchgear Technical Data TD280015EN Effective July 2015 Supersedes R /2012 Communications Point Data Base for Serial and Ethernet Communications Protocol DNP3 For use with Eaton s Cooper Power series Form 6 Recloser Control COOPER POWER SERIES
2 Form 6 DNP3 Map Points July 1, 2015 v3.00 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF EATON. UNAUTHORIZED REPRODUCTION OR MODIFICATION IS PROHIBITED. Document Date Description /30/2001 Initial release /30/2001 Changed wording on SGF "enable" to "block" Made hot line tag CROBs self-resetting /8/2002 Added Binary Input 59 as "CCI:Control Circuit Interrupted" /30/2002 Added CROBs 18 (Combined Trip / Close) and 19 (Sync-Check Enable) /20/2002 Changed nomenclature of binary inputs and outputs /29/2003 Added TS crob definitions, updated counter & binary input definitions match the 'DNP Tables at last compilation' file /10/2004 Added TS binary input and counter definitions /28/2005 Minor edits in the Class 0-3, Binarys tab /24/2012 Updates and re-release for ProView /1/2015 Updates and re-release for ProView 5.1 Page 1 Cover Page
3 INPUT SUBSYSTEM Binary Inputs Static Variation Event Variation Obj 01 Var 01 Binary input w/o status Obj 02 Var 2 Binary input with time Description Index Hex Index Event Class Recloser Closed Recloser Open Control is Locked Out Any Control or System Alarm Above Minimum Trip Supervisory Off Non-Reclosing Ground Trip Blocked SEF Blocked CLPU Blocked Fast Trips Blocked 10 0A 1 Profile Selected (Normal) 11 0B 1 Profile Selected (Alt1) 12 0C 1 Profile Selected (Alt2) 13 0D 1 Profile Selected (Alt3) 14 0E 1 Hot Line Tag 15 0F 1 Bus Voltage Present (Phase A) Bus Voltage Present (Phase B) Bus Voltage Present (Phase C) Reverse Power Flow Battery Test in Progress No AC Power Battery Alarm ci8:alt1 (TB3:9-10) ci9:alt2 (TB3:11-12) ci10:alt3 (TB3:13-14) ci11:nrml (TB3:15-16) 26 1A 1 co1:aux (TB1:11-12,13) 27 1B 1 co2:ok (TB1:14-15) 28 1C 1 co3:hlt (TB1:16-17) 29 1D 1 co4:gtb (TB1:18-19) 30 1E 1 ss1:lo (TB1:9-10) 31 1F 1 co5:nr (TB3:17-18) co6:alm (TB3:19-20,21) co7:nrm (TB4:1-2) co8:alt1 (TB4:3-4) co9:alt2 (TB4:5-6) co10:alt3 (TB4:7-8) co11:frq (TB4:9-10) co12:vlt (TB4:11-12,13) Reclose Retry Enabled Page 2 Class 0-3, Binarys
4 INPUT SUBSYSTEM Binary Inputs Static Variation Event Variation Obj 01 Var 01 Binary input w/o status Obj 02 Var 2 Binary input with time Description Index Hex Index Event Class A Phase Fault Trip B Phase Fault Trip 42 2A 1 C Phase Fault Trip 43 2B 1 Ground Fault Trip 44 2C 1 SEF Trip 45 2D 1 ci1:rtrip (TB1:3-4) 46 2E 1 ci2:sclose (TB1:5-6) 47 2F 1 ci3:strip (TB1:7-8) ci4:gtb (TB3:1-2) ci5:nrecl (TB3:3-4) ci6:targr (TB3:5-6) ci7 (TB3:7-8) Ground Overcurrent Alarm Phase Overcurrent Alarm Negative Sequence Overcurrent Alarm Hot Line Tag On from Workbench Hot Line Tag On from Communications Hot Line Tag On from Front Panel Switch 58 3A 1 Control Circuit Interrupted 59 3B 1 Page 3 Class 0-3, Binarys
5 INPUT SUBSYSTEM Binary Inputs (Triple-Single) Static Variation Event Variation Obj 01 Var 01 Binary input w/o status Obj 02 Var 2 Binary input with time Description Index Hex Index Event Class Recloser Closed (Phase A) Recloser Open (Phase A) Control is Locked Out Any Control or System Alarm Above Minimum Trip Supervisory Off Non-Reclosing Ground Trip Blocked SEF Blocked CLPU Blocked Fast Trips Blocked 10 0A 1 Profile Selected (Normal) 11 0B 1 Profile Selected (Alt1) 12 0C 1 Profile Selected (Alt2) 13 0D 1 Profile Selected (Alt3) 14 0E 1 Hot Line Tag 15 0F 1 Bus Voltage Present (Phase A) Bus Voltage Present (Phase B) Bus Voltage Present (Phase C) Reverse Power Flow Battery Test in Progress No AC Power Battery Alarm ci8:alt1 (TB3:9-10) ci9:alt2 (TB3:11-12) ci10:alt3 (TB3:13-14) ci11:nrml (TB3:15-16) 26 1A 1 co1:aux (TB1:11-12,13) 27 1B 1 co2:ok (TB1:14-15) 28 1C 1 co3:hlt (TB1:16-17) 29 1D 1 co4:gtb (TB1:18-19) 30 1E 1 ss1:lo (TB1:9-10) 31 1F 1 co5:nr (TB3:17-18) co6:alm (TB3:19-20,21) co7:nrm (TB4:1-2) co8:alt1 (TB4:3-4) co9:alt2 (TB4:5-6) co10:alt3 (TB4:7-8) co11:frq (TB4:9-10) co12:vlt (TB4:11-12,13) Reclose Retry Enabled Page 4 Class 0-3, Binarys (TS)
6 INPUT SUBSYSTEM Binary Inputs (Triple-Single) Static Variation Event Variation Obj 01 Var 01 Binary input w/o status Obj 02 Var 2 Binary input with time Description Index Hex Index Event Class A Phase Fault Trip B Phase Fault Trip 42 2A 1 C Phase Fault Trip 43 2B 1 Ground Fault Trip 44 2C 1 SEF Trip 45 2D 1 ci1:rtrip (TB1:3-4) 46 2E 1 ci2:sclose (TB1:5-6) 47 2F 1 ci3:strip (TB1:7-8) ci4:gtb (TB3:1-2) ci5:nrecl (TB3:3-4) ci6:targr (TB3:5-6) ci7 (TB3:7-8) Ground Overcurrent Alarm Phase A Overcurrent Alarm Negative Sequence Overcurrent Alarm Hot Line Tag On from Workbench Hot Line Tag On from Communications Hot Line Tag On from Front Panel Switch 58 3A 1 Control Circuit Interrupted (Phase A) 59 3B 1 Recloser Closed (Phase B) 60 3C 1 Recloser Open (Phase B) 61 3D 1 Control is Locked Out (Phase B) 62 3E 1 Control Circuit Interrupted (Phase B) 63 3F 1 Recloser Closed (Phase C) Recloser Open (Phase C) Control is Locked Out (Phase C) Control Circuit Interrupted (Phase C) Phase B Overcurrent Alarm Phase C Overcurrent Alarm Ganged Mode Mode Mode USEF Blocked Profile Selected (Alt 4) 74 4A 1 Profile Selected (Alt 5) 75 4B 1 Page 5 Class 0-3, Binarys (TS)
7 INPUT SUBSYSTEM Counters Static Variation Event Variation Obj 20 Var 2 16 bit Counter Obj 22 Var 2 16 bit Counter w/o time Description Index Hex Index Event Class Deadband Trip Counter (Phase A) Trip Counter (Phase B) Trip Counter (Phase C) Trip Counter (Ground) Trip Counter (SEF) Total Trip Counter Page 6 Class 0-3, Counters
8 INPUT SUBSYSTEM Counters (Triple-Single) Static Variation Event Variation Obj 20 Var 2 16 bit Counter Obj 22 Var 2 16 bit Counter w/o time Description Index Hex Index Event Class Deadband Trip Counter (Phase A) Trip Counter (Phase B) Trip Counter (Phase C) Trip Counter (Ground) Trip Counter (SEF) Total Trip Counter Operations Counter (Phase A) Operations Counter (Phase B) Operations Counter (Phase C) Page 7 Class 0-3, Counters (TS)
9 INPUT SUBSYSTEM Analog Inputs Static Variation Event Variation Obj 30 Var 2 16 bit Obj 32 Var 2 16 bit w/o time Description Index Hex Index Event Class Division Scale Factor Units Deadband Low Threshold High Threshold A Phase Primary Current Magnitude Amps B Phase Primary Current Magnitude Amps C Phase Primary Current Magnitude Amps I0 Primary Current Magnitude Amps A Phase Primary Voltage Magnitude Volts B Phase Primary Voltage Magnitude Volts C Phase Primary Voltage Magnitude Volts A Phase Power Factor B Phase Power Factor C Phase Power Factor A Phase Primary Apparent Power 10 0A 2 1 kva B Phase Primary Apparent Power 11 0B 2 1 kva C Phase Primary Apparent Power 12 0C 2 1 kva A Phase Primary Real Power 13 0D 2 1 kw B Phase Primary Real Power 14 0E 2 1 kw C Phase Primary Real Power 15 0F 2 1 kw A Phase Primary Reactive Power kvar B Phase Primary Reactive Power kvar C Phase Primary Reactive Power kvar Line Frequency Hz A Phase Primary Demand Currents Amps B Phase Primary Demand Currents Amps C Phase Primary Demand Currents Amps Battery Voltage Volts Battery Current Amps Page 8 Class 0-3, Analog Inputs
10 OUTPUT SUBSYSTEM - Control Output Relay Block Operations and Status Static Variation Description Index Hex Index Obj Var Desc Operation Type Operation (Support) Mask Condition Conditioned by Supervisory State (Factory ) Description Binary Output CROB Self-Resetting 0xff Off Yes * Close Mechanism Binary Output CROB Self-Resetting 0xff Off Yes * Trip Mechanism Binary Output CROB Latched 0xff Off Yes Block Reclosing Binary Output CROB Latched 0xff Off Yes Block Ground Trip Binary Output CROB Latched 0xff Off Yes Block SEF Binary Output CROB Latched 0xff Off Yes Block CLPU Binary Output CROB Latched 0xff Off Yes Block Fast Trips Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Normal Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt1 Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt2 Binary Output 10 0A CROB Self-Resetting 0xff Off Yes * Profile - Alt3 Binary Output 11 0B CROB Self-Resetting 0xff Off Yes * Reset Targets Binary Output 12 0C CROB Self-Resetting 0xff Off Yes * Reset Demand Meters Binary Output 13 0D CROB Self-Resetting 0xff Off Yes * Reset Alarms Binary Output 14 0E CROB Self-Resetting 0xff Off Yes * Test Battery Binary Output 15 0F CROB Self-Resetting 0xff Off No *, *** Hot Line Tag Set Binary Output CROB Self-Resetting 0xff Off Yes *, *** Hot Line Tag Reset Binary Output CROB Latched 0xff Off Yes Enable Reclose Retry Binary Output CROB Self-Resetting 0xff Off Yes Combined Trip and Close Binary Output CROB Latched 0xff Off Yes Enable Sync Check Binary Output CROB Latched 0xff Off Yes Block USEF Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt4 Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt5 Binary Output CROB Latched 0xff Off Yes Not Used Binary Output CROB Latched 0xff Off Yes Not Used Binary Output CROB Latched 0xff Off Yes Not Used Binary Output 26 1A CROB Latched 0xff Off Yes Not Used Binary Output 27 1B CROB Latched 0xff Off Yes Not Used Binary Output 28 1C CROB Latched 0xff Off Yes Not Used Binary Output 29 1D CROB Latched 0xff Off Yes Not Used Binary Output 30 1E CROB Latched 0xff Off Yes Not Used Binary Output 31 1F CROB Latched 0xff Off Yes Not Used * Momentary/Self Resetting, always read FALSE *** Hot Line Tag activates a latching relay in the control "close" circuit. Crosshatch indicates point is supervised regardless of setting Binary Output Status * Close Mechanism Binary Output Status * Trip Mechanism Binary Output Status Block Reclosing Page 9 CROB
11 OUTPUT SUBSYSTEM - Control Output Relay Block Operations and Status Static Variation Description Index Hex Index Obj Var Desc Operation Type Operation (Support) Mask Condition Conditioned by Supervisory State (Factory ) Description Binary Output Status Block Ground Trip Binary Output Status Block SEF Binary Output Status Block CLPU Binary Output Status Block Fast Trips Binary Output Status * Profile - Normal Binary Output Status * Profile - Alt1 Binary Output Status * Profile - Alt2 Binary Output 10 0A Status * Profile - Alt3 Binary Output 11 0B Status * Reset Targets Binary Output 12 0C Status * Reset Demand Meters Binary Output 13 0D Status * Reset Alarms Binary Output 14 0E Status * Test Battery Binary Output 15 0F Status *, *** Hot Line Tag Set Binary Output Status *, *** Hot Line Tag Reset Binary Output Status Enable Reclose Retry Binary Output Status Combined Trip and Close Binary Output Status Enable Sync Check Binary Output Status Block USEF Binary Output Status * Profile - Alt4 Binary Output Status * Profile - Alt5 Binary Output Status Not Used Binary Output Status Not Used Binary Output Status Not Used Binary Output 26 1A Status Not Used Binary Output 27 1B Status Not Used Binary Output 28 1C Status Not Used Binary Output 29 1D Status Not Used Binary Output 30 1E Status Not Used Binary Output 31 1F Status Not Used * Momentary/Self Resetting, always read FALSE *** Hot Line Tag activates a latching relay in the control "close" circuit. Page 10 CROB
12 OUTPUT SUBSYSTEM - Control Output Relay Block Operations and Status (Triple-Single) Static Variation Description Index Hex Index Obj Var Desc Operation Type Operation (Support) Mask Condition Conditioned by Supervisory State (Factory ) Description Binary Output CROB Self-Resetting 0xff Off Yes * Close Mechanism (Phase A) Binary Output CROB Self-Resetting 0xff Off Yes * Trip Mechanism (Phase A) Binary Output CROB Latched 0xff Off Yes Block Reclosing Binary Output CROB Latched 0xff Off Yes Block Ground Trip Binary Output CROB Latched 0xff Off Yes Block SEF Binary Output CROB Latched 0xff Off Yes Block CLPU Binary Output CROB Latched 0xff Off Yes Block Fast Trips Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Normal Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt1 Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt2 Binary Output 10 0A CROB Self-Resetting 0xff Off Yes * Profile - Alt3 Binary Output 11 0B CROB Self-Resetting 0xff Off Yes * Reset Targets Binary Output 12 0C CROB Self-Resetting 0xff Off Yes * Reset Demand Meters Binary Output 13 0D CROB Self-Resetting 0xff Off Yes * Reset Alarms Binary Output 14 0E CROB Self-Resetting 0xff Off Yes * Test Battery Binary Output 15 0F CROB Self-Resetting 0xff Off No *, *** Hot Line Tag Set Binary Output CROB Self-Resetting 0xff Off Yes *, *** Hot Line Tag Reset Binary Output CROB Latched 0xff Off Yes Enable Reclose Retry Binary Output CROB Self-Resetting 0xff Off Yes Combined Trip and Close (Phase A) Binary Output CROB Latched 0xff Off Yes Enable Sync Check Binary Output CROB Latched 0xff Off Yes * Trip Mechanism (Phase B) Binary Output CROB Latched 0xff Off Yes * Trip Mechanism (Phase C) Binary Output CROB Latched 0xff Off Yes * Close Mechanism (Phase B) Binary Output CROB Latched 0xff Off Yes * Close Mechanism (Phase C) Binary Output CROB Latched 0xff Off Yes * Activate Ganged Mode Binary Output CROB Latched 0xff Off Yes * Activate 1-3 Mode Binary Output 26 1A CROB Latched 0xff Off Yes * Activate 1-1 Mode Binary Output 27 1B CROB Latched 0xff Off Yes * Trip All Phases Binary Output 28 1C CROB Latched 0xff Off Yes * Close All Phases Binary Output 29 1D CROB Self-Resetting 0xff Off Yes Combined Trip and Close (Phase B) Binary Output 30 1E CROB Self-Resetting 0xff Off Yes Combined Trip and Close (Phase C) Binary Output 31 1F CROB Latched 0xff Off Yes Block USEF Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt4 Binary Output CROB Self-Resetting 0xff Off Yes * Profile - Alt5 * Momentary/Self Resetting, always read FALSE *** Hot Line Tag activates a latching relay in the control "close" circuit. Crosshatch indicates point is supervised regardless of setting Binary Output Status * Close Mechanism (Phase A) Page 11 CROB (TS)
13 OUTPUT SUBSYSTEM - Control Output Relay Block Operations and Status (Triple-Single) Static Variation Description Index Hex Index Obj Var Desc Operation Type Operation (Support) Mask Condition Conditioned by Supervisory State (Factory ) Description Binary Output Status * Trip Mechanism (Phase A) Binary Output Status Block Reclosing Binary Output Status Block Ground Trip Binary Output Status Block SEF Binary Output Status Block CLPU Binary Output Status Block Fast Trips Binary Output Status * Profile - Normal Binary Output Status * Profile - Alt1 Binary Output Status * Profile - Alt2 Binary Output 10 0A Status * Profile - Alt3 Binary Output 11 0B Status * Reset Targets Binary Output 12 0C Status * Reset Demand Meters Binary Output 13 0D Status * Reset Alarms Binary Output 14 0E Status * Test Battery Binary Output 15 0F Status *, *** Hot Line Tag Set Binary Output Status *, *** Hot Line Tag Reset Binary Output Status Enable Reclose Retry Binary Output Status Combined Trip and Close Binary Output Status Enable Sync Check Binary Output Status * Trip Mechanism (Phase B) Binary Output Status * Trip Mechanism (Phase C) Binary Output Status * Close Mechanism (Phase B) Binary Output Status * Close Mechanism (Phase C) Binary Output Status * Activate Ganged Mode Binary Output Status * Activate 1-3 Mode Binary Output 26 1A Status * Activate 1-1 Mode Binary Output 27 1B Status * Trip All Phases Binary Output 28 1C Status * Close All Phases Binary Output 29 1D Status Combined Trip and Close (Phase B) Binary Output 30 1E Status Combined Trip and Close (Phase C) Binary Output 31 1F Status Block USEF Binary Output Status * Profile - Alt4 Binary Output Status * Profile - Alt5 * Momentary/Self Resetting, always read FALSE *** Hot Line Tag activates a latching relay in the control "close" circuit. Page 12 CROB (TS)
14 Technical Data TD280015EN Effective July 2015 Communications Point Data Base Eaton 1000 Eaton Boulevard Cleveland, OH United States Eaton.com Eaton s Cooper Power Systems Division 2300 Badger Drive Waukesha, WI United States Eaton.com/cooperpowerseries 2015 Eaton All Rights Reserved Printed in USA Publication No. TD280015EN July 2015 Eaton is a registered trademark. All other trademarks are property of their respective owners. For Eaton's Cooper Power series Form 6 recloser control information call or visit:
MiCOM P443-6/P543-7/P841
MiCOM P443-6/P543-7/P841 Release Notes P443-6/P543-7/P841 Upgrade Platform Hardware Version: M, P Platform Software Version: 75, 65, 45 Publication Reference: P443-6/P543-7/P841-RNC1-TM-EN-1 ALSTOM 2013.
APOGEE Open Processor with Cummins/Onan Modbus Driver: PowerCommand System
Point Map April 2, 2004 Systems Integration APOGEE Open Processor with Cummins/Onan Modbus Driver: PowerCommand System This document provides example point maps for common devices in a Cummins/Onan PowerCommand
Square D Modbus Solution: Altivar 58 VFD
Point Map November 1, 2004 Systems Integration Square D Modbus Solution: Altivar 58 VFD Table 1. Altivar 58 VFD Point Map, Application 4509. 1 LAO Slave Address 1to247 2 LAI Application Number 4509 3 LDI
MICHIGAN ELECTRIC UTILITY
MICHIGAN ELECTRIC UTILITY Generator Interconnection Requirements Projects with Aggregate Generator Output of 30 kw or More, but Less than 150 kw Effective Aug. 10, 2004 INTRODUCTION This Generator Interconnection
Interconnection and Protection Engineering Breaking News: Policy Update
Interconnection and Protection Engineering Breaking News: Policy Update Unintentional Islanding Protection Practice for DER Chris Vance National Grid Engineering Policy Safety Message All field visits
ENTERGY NEW ORLEANS, INC. STANDARD INTERCONNECTION AGREEMENT FOR NET METERING FACILITIES LOCATED IN ORLEANS PARISH
INSTRUCTIONS: Enter information in the empty fields below and send this form to Entergy. This Standard Interconnection Agreement shall be completed, submitted and approved before the net metering facility
ENTERGY LOUISIANA, LLC STANDARD INTERCONNECTION AGREEMENT FOR NET METERING FACILITIES
INSTRUCTIONS Enter information in the empty fields below and send this form to Entergy. This Standard Interconnection Agreement shall be completed, submitted and approved before the net metering facility
Interconnection Process for Customer-Owned Generation (QFs)
Interconnection Process for Customer-Owned Generation (QFs) Member-consumer makes Co-op letter explaining process & providing information (including co-op Application Member reviews information Member
Interconnection Process and Guide for Small Power Generation Systems
Interconnection Process and Guide for Small Power Generation Systems As Adopted by the Board of Directors South Central Indiana REMC July 2014 Amended 05-25-2017 South Central Indiana REMC 300 Morton Avenue
Orange and Rockland Utilities, Inc. Issued in compliance with Order in Case 15-E-0036 dated 07/20/2015.
Orange and Rockland Utilities, Inc. Addendum - SIR-5 INITIAL EFFECTIVE DATE: July 27, 2015 To P.S.C. No. 3 - Electricity Issued in compliance with Order in Case 15-E-0036 dated 07/20/2015. New York State
Distributed Generation Basic Interconnection Requirements and Conditions Effective April 1, 2006
Distributed Generation Basic Interconnection Requirements and Conditions Effective April 1, 2006 These rules are intended to outline the requirements for interconnecting a Distributed Generation Facility
EXCERPTS from the SAMS-SPCS SPS Technical Reference
Problem Statement The existing NERC Glossary of Terms definition for a Special Protection System (SPS or, as used in the Western Interconnection, a Remedial Action Scheme or RAS) lacks clarity and specificity
ATTACHMENT G SMALL GENERATOR INTERCONNECTION PROCEDURES (SGIP) (For Generating Facilities No Larger Than 20 MW)
ATTACHMENT G SMALL GENERATOR INTERCONNECTION PROCEDURES (SGIP) (For Generating Facilities No Larger Than 20 MW) TABLE OF CONTENTS Page No. Section 1. Application... 1.1 Applicability... 1.2 Pre-Application...
STANDARD INTERCONNECTION AGREEMENT FOR INTERCONNECTED CUSTOMER-OWNED BATTERY SUBSYSTEMS 1 KW OR MORE
STANDARD INTERCONNECTION AGREEMENT FOR INTERCONNECTED CUSTOMER-OWNED BATTERY SUBSYSTEMS 1 KW OR MORE This Agreement is made and entered into this day of, 20, by and between, (hereinafter called "Customer"),
AGREEMENT FOR CONNECTION TO EASTERN POWER NETWORKS PLC S DISTRIBUTION SYSTEM
AGREEMENT FOR CONNECTION TO EASTERN POWER NETWORKS PLC S DISTRIBUTION SYSTEM BETWEEN (1) [Eastern / London / South Eastern] Power Networks plc Company Number [02366906 / 03929195 / 03043097] Newington
Electric Interconnection Policy Category 1 Projects Aggregate Generator Output (20 kw and Under)
Marquette Board of Light and Power 2200 Wright Street Marquette, Michigan 49855 906-228-0300 Electric Interconnection Policy Category 1 Projects Aggregate Generator Output (20 kw and Under) Effective:
Interconnection Application and Compliance Form For Photovoltaic Systems Up to 2 MW
Interconnection Application and Compliance Form For Photovoltaic Systems Up to 2 MW A. APPLICANT INFORMATION *Person/Company Name: *OUC Account No.: *Mailing Address: *City, State & Zip: Street Address
ENTERGY MISSISSIPPI, INC. STANDARD INTERCONNECTION APPLICATION AND AGREEMENT FOR RESIDENTIAL NET METERING FACILITIES (for systems 20 kw or less)
INSTRUCTIONS: Enter information in the empty fields below and send this form to Entergy Mississippi, Inc. ( Entergy or the Company ). This Standard Interconnection Application and Agreement shall be completed,
Implementation Plan Project PRC-005 FERC Order No. 803 Directive PRC-005-6
Project 2007-17.4 PRC-005 FERC Order No. 803 Directive PRC-005-6 Standards Involved Approval: PRC 005 6 Protection System, Automatic Reclosing, and Sudden Pressure Relaying Maintenance Retirement: PRC
Cogeneration and Small Power Production Parallel Operation, Power Sales and Interconnection Agreement
between and Lincoln Electric System This Power Sales and Interconnection, hereinafter called the, is made and entered into as of the day of, 20, by and between, hereinafter referred to as the Owner of
ENTERGY MISSISSIPPI, INC. STANDARD INTERCONNECTION APPLICATION AND AGREEMENT FOR NON-RESIDENTIAL NET METERING FACILITIES (for kw systems)
INSTRUCTIONS: Enter information in the empty fields below and send this form to Entergy Mississippi, Inc. ( Entergy or the Company ). This Standard Interconnection Application and Agreement shall be completed,
Big Country Electric Cooperative, Inc. Big Country Development Corporation
Big Country Electric Cooperative, Inc. Big Country Development Corporation Dear Member, We look forward to working with you and being of service as your residential scale memberowned generation project
SMALL GENERATOR INTERCONNECTION PROCEDURES (SGIP) (For Generating Facilities No Larger Than 20 MW)
SMALL GENERATOR INTERCONNECTION PROCEDURES (SGIP) (For Generating Facilities No Larger Than 20 MW) TABLE OF CONTENTS - i - Page No. Section 1. Application... - 1-1.1 Applicability... - 1-1.2 Pre-Application...
Steps/Process. <COOPERATIVE NAME> 10 kw INVERTER PROCESS Page 1
10 kw INVERTER PROCESS Page 1 Application, Procedures, and Terms and Conditions for Interconnecting a Certified Inverter-Based Generation Facility No Larger than 10 kw ("10 kw Inverter Process") Steps/Process
HOLY CROSS ENERGY November 3, 2015 GENERATOR INTERCONNECT POLICY
GENERATOR INTERCONNECT POLICY GENERATOR INTERCONNECT (PROCEDURE) GENERATOR INTERCONNECT (GUIDELINES) Page 1 of 50 TABLE OF CONTENTS GENERATOR INTERCONNECT (PROCEDURE)... 4 I. GENERAL OVERVIEW... 5 A. Applicability...
BOARD POLICY NUMBER 38 NET METERING AND COOPERATIVE PURCHASE OF EXCESS MEMBER OWNED GENERATION CAPACITY
I. OBJECTIVE BOARD POLICY NUMBER 38 NET METERING AND COOPERATIVE PURCHASE OF EXCESS MEMBER OWNED GENERATION CAPACITY To encourage member investment in renewable energy resources, comply with the Public
REISSUED JUNE 1, 1988
REVISED SHEET NO. 29 Effective: October 28, 1966 RULE NO. 14 REISSUED JUNE 1, 1988 Service Connections and Facilities on Customer's Premises A. METER INSTALLATIONS AND MISCELLANEOUS SERVICE EQUIPMENT ON
SIMULTANEOUS TRIP OF SOUTH EAST No.1 AND No kv SVCs ON 31 JULY 2017 REVIEWABLE OPERATING INCIDENT REPORT UNDER THE NATIONAL ELECTRICITY RULES
SIMULTANEOUS TRIP OF SOUTH EAST No.1 AND No.2 275 kv SVCs ON 31 JULY 2017 REVIEWABLE OPERATING INCIDENT REPORT UNDER THE NATIONAL ELECTRICITY RULES Published: 20 September 2017 INCIDENT CLASSIFICATIONS
New York State Public Service Commission
PSC NO. 220 ELECTRICITY ADDENDUM TYPES: SIR NIAGARA MOHAWK POWER CORPORATION ADDENDUM NO. 7 INITIAL EFFECTIVE DATE: AUGUST 16, 2017 STAMPS: ISSUED IN COMPLIANCE WITH ORDER IN CASE 16-E-0560 Issued August
Jefferson Energy Cooperative Policy 124 DISTRIBUTED GENERATION POLICY
DISTRIBUTED GENERATION POLICY I. OBJECTIVE This document establishes the terms and conditions for the interconnection of distributed generation facilities and for providing net energy metering services
Renewable Generation (Category 2 20 kw to 150 kw)
Renewable Generation (Category 2 20 kw to 150 kw) Net Metering Program Generator Interconnection Application Interconnection & Parallel Operating Agreement 01/13 Net Metering Program What is net metering?
Issued: September 2, 2014 Effective: October 3, 2014 WN U-60 Attachment B to Schedule 150, Page 1
WN U-60 Attachment B to Schedule 150, Page 1 FUEL CELL, SOLAR, WIND, BIOGAS, COMBINED HEAT AND POWER, OR HYDROPOWER ELECTRIC GENERATING FACILITIES OF 100 KILOWATTS OR LESS Application and Agreement for
IEC : Annex F
IEC 61511-3:2016 - Annex F SAFETY REQUIREMENT SPECIFICATION Page: Page 2 of 6 CONTENTS 1. SIF SRS... 3 2. SIF SRS(S)... 4 Page: Page 3 of 6 1. SIF SRS Table 1. SRS for the SIS SIS Details Operator Interfaces
AUFLS information paper
AUFLS information paper Contents 1 Introduction... 1 2 The under-frequency management challenge... 1 3 Overview of current arrangements... 3 3.1 The current AUFLS exemptions... 4 4 Initiatives to address
Section 24 COGENERATION AND SMALL POWER PRODUCTION
Section 24 COGENERATION AND SMALL POWER PRODUCTION Cooperative is a member of Corn Belt Power Cooperative and Northwest Iowa Power Cooperative, generation and transmission cooperatives ("G&T" or "Corn
I. Members Applying for New Interconnection/Submission of Plans/Specifications.
PLATTE-CLAY ELECTRIC COOPERATIVE APPLICATION AND AGREEMENT FOR INTERCONNECTION AND NET METERING OF RENEWABLE ENERGY SYSTEMS WITH CAPACITY OF 100 kw OR LESS PROCEDURES: I. Members Applying for New Interconnection/Submission
Chapter 38. UTILITIES* ARTICLE III. ELECTRIC SERVICE*
Chapter 38. UTILITIES* ARTICLE III. ELECTRIC SERVICE* Sec. 38-170. Definitions. Words used in the present tense include the future, and the words in the singular number include the plural. The words in
Snapping Shoals EMC Distributed Generation Basic Interconnection Requirements and Conditions Effective January 12, 2016
POLICY 1647. Snapping Shoals EMC Distributed Generation Basic Interconnection Requirements and Conditions Effective January 12, 2016 GENERAL: This document provides standards, rules, specifications, testing
AGREEMENT FOR PURCHASE OF AS-AVAILABLE ENERGY AND/OR PARALLEL OPERATION WITH A QUALIFYING FACILITY TABLE OF CONTENTS
ProgressEnergy SECOND REVISED SHEET No. 9.100 CANCELS FIRST REVISED SHEET No. 9.100 AGREEMENT FOR PURCHASE OF AS-AVAILABLE ENERGY AND/OR PARALLEL OPERATION WITH A QUALIFYING FACILITY TABLE OF CONTENTS
CLINTON COUNTY ELECTRIC COOPERATIVE, INC. BREESE, ILLINOIS INTERCONNECTION AND PARALLEL OPERATION OF DISTRIBUTED GENERATION
CLINTON COUNTY ELECTRIC COOPERATIVE, INC. BREESE, ILLINOIS MEMBERS: POLICY NO. 126 SUBJECT: INTERCONNECTION AND PARALLEL OPERATION OF DISTRIBUTED GENERATION I. OBJECTIVE To establish safety, reliability
NET ENERGY METERING AND INTERCONNECTION AGREEMENT
NET ENERGY METERING AND INTERCONNECTION AGREEMENT This Net Energy Metering and Interconnection Agreement (the Agreement ), dated,, (the Effective Date ), is entered into by and between the CITY OF PALO
MODEL INTERCONNECTION PROCEDURES
MODEL INTERCONNECTION PROCEDURES 2009 EDITION Introduction IREC first developed model interconnection procedures in 2005 in an effort to capture emerging best practices in this vital area. Since that time,
Electric Rate Schedule GS-2 General Service - Demand
Page 1 of 5 Applicability This Schedule is applicable to general commercial customers having demands in excess of 20 kilowatts and less than 1,000 kilowatts, and public units for residential occupancy.
Western Power Distribution (East Midlands) plc Registered in England and Wales No
CONNECTION AGREEMENT THIS AGREEMENT is made the day of 2014 Between Western Power Distribution (East Midlands) plc Registered in England and Wales No. 2366923 Whose REGISTERED OFFICE is at And Avonbank
Authority 1: EAC (Electricity Authority of Cyprus) as acting DSO, Technical Instruction KE1/33/2005
A. INTERCONNECTION RULES Country: CYPRUS Eligible renewable /other technologies: PV Applicable sectors: All sectors Breakpoint for Small System (Simplified Rules): 20 kw Rules for net metering systems:
WISCONSIN ELECTRIC POWER COMPANY MICHIGAN
Original Sheet No. A-1.00 WISCONSIN ELECTRIC POWER COMPANY MICHIGAN RATE BOOK FOR ELECTRIC SERVICE These Standard Rules and Regulations and Rate Schedules contained herein have been adopted by the Company
PUF RO (RING OSCILLATOR)
PUF RO (RING OSCILLATOR) EEC 492/592, CIS 493 Hands-on Experience on Computer System Security Chan Yu Cleveland State University CIRCUIT PUF - PREVIOUS WORK Ravikanth et. al proposed the first PUF in literature
Derivation of State Graphs and Tables UNIT 14 DERIVATION OF STATE GRAPHS AND TABLES. Designing a Sequential Circuit. Sequence Detectors
Derivation of State Graphs and Tables 2 Contents Case studies: sequence detectors Guidelines for construction of graphs Serial data code conversion Alphanumeric graph notation Reading Unit 4 Basic unit
New Mexico Public Regulation Commission P. O. Box Paseo de Peralta Santa Fe, New Mexico 87504
THE NEW MEXICO INTERCONNECTION MANUAL (To be Used in Conjunction with New Mexico Public Regulation Commission Rule 17.9.568 NMAC, Interconnection of Generating Facilities with a Rated Capacity Up to and
PMP kW Totem-Pole PFC EVM Test Report
PMP20873 1kW Totem-Pole PFC EVM Test Report GaN / Next Zhong Ye Oct. 2016 1 Start up High line startup Note: extra 0.9 second was inserted due to DCP010512 bias long startup time. The time can be eliminated
TRI-COUNTY ELECTRIC COOPERATIVE APPLICATION AND AGREEMENT FOR INTERCONNECTION AND NET METERING OF SYSTEMS WITH CAPACITY OF 100 kw OR LESS
TRI-COUNTY ELECTRIC COOPERATIVE APPLICATION AND AGREEMENT FOR INTERCONNECTION AND NET METERING OF SYSTEMS WITH CAPACITY OF 100 kw OR LESS PROCEDURES: I. Members Applying for New Interconnection/Submission
RIDER 779 INTERCONNECTION STANDARDS. This Rider shall be applicable to the Rate Schedules as identified in Appendix A.
NORTHERN INDIANA PUBLIC SERVICE COMPANY Original Sheet No. 141 TO WHOM AVAILABLE This Rider shall be applicable to the Rate Schedules as identified in Appendix A. Sheet No. 1 of 16 In accordance with 170
BANDERA ELECTRIC COOPERATIVE, INC. Tariff for Electric Service. Sheet No. Section III 1.0
1.0 340. Small Power Production Sections 340-345 of this tariff apply to the interconnection and parallel operation of all small power generating installations. All installations must meet all system performance
Fees - Standard Mode Guide
Fees - Standard Mode Guide Release 2018 May 2017 SISFSAUG-010103 The Edupoint software and any form of supporting documentation are proprietary and confidential. Unauthorized reproduction or distribution
SHEET NO A Effective February 20, 2018
SHEET NO. 49.1-A Rule No. 24 CUSTOMER GRID SUPPLY PLUS A. AVAILABILITY FOR CUSTOMER-GENERATORS Customer Grid-Supply Plus service is available to Eligible Customer-Generators who own or lease from a third
LEVEL 1: STANDARD APPLICATION FORM AND INTERCONNECTION AGREEMENT
LEVEL 1: STANDARD APPLICATION FORM AND INTERCONNECTION AGREEMENT Interconnection Request Application Form and Conditional Agreement to Interconnect (For Lab-Certified Inverter-Based Distributed Generation
TITLE: Line Current Differential Relay PHONE NO: (573) ISSUE DATE:
BID REQUEST NO.: 19 8001 KS C STRATEGIC SOURCING SPECIALIST: Kevin Summers TITLE: Line Current Differential Relay PHONE NO: (573) 884-8797 ISSUE DATE: 7-23-18 E-MAIL: SummersK@umsystem.edu RETURN BID NO
LONWORKS Solution to Danfoss Graham VLT 6000 Adjustable Frequency Drive
Point Map February 23, 2007 Systems Integration LONWORKS Solution to Danfoss Graham VLT 6000 Adjustable Frequency Drive Table 1. VLT 6000 APOGEE Points, Application Number:9098, Program ID:80:00:08:3C:0A:04:04:04.
Section 25 COGENERATION AND SMALL POWER PRODUCTION Effective Date: June 15, 2016
Section 25 COGENERATION AND SMALL POWER PRODUCTION Allamakee-Clayton Electric Cooperative is a member of Dairyland Power Cooperative, a generation and transmission cooperative ("G&T") and obtains all of
Users Guide for Ac-MINI
Problem solved. Users Guide for Ac-MINI Thank you for choosing Anywhere Cart! The AC-MINI is designed to charge and store 1-12 Chromebooks, tablets, and laptops. The AC-MINI-16 is designed to charge and
RENEWABLE ENERGY INCENTIVE PROGRAM Step 1, Section 1 Uniform Credit Purchase Program Application
RENEWABLE ENERGY INCENTIVE PROGRAM Step 1, Section 1 Uniform Credit Purchase Program Application For residential and commercial systems, the combined generation capacity at the location is limited to a
FIRSTENERGY INTERCONNECTION APPLICATION/AGREEMENT - PART
FIRSTENERGY INTERCONNECTION APPLICATION/AGREEMENT - PART 1 With Terms and Conditions for Interconnection For a Level 1 Review (Certified Inverter-based Units of 10kW and under) (Application & Conditional
Installation Instructions for Undervoltage Release Mechanism (Cradle Reset) for GB/GHB, GC/GHC Circuit Breakers
Supersedes IL 15553A Dated 8/10 Contents Description Page Introduction.............................. 2 Installation............................... 3 Effective December 2013 The recommendations and informations
Standard PRC-004-3(x) Protection System Misoperation Identification and Correction
Standard PRC-004-3(x) Protection System Misoperation Identification and Correction Standard Development Timeline This section is maintained by the drafting team during the development of the standard and
PROGRAMMING GUIDE FOR PPC6000 SERIES
NXPG-6001 APRIL 8, 2013 PROGRAMMING GUIDE FOR PPC6000 SERIES DESCRIPTION: This document supplies the commissioning engineer with sufficient information to make appropriate setup and changes to the commissioning
East Central Energy. Rate schedule C&I. C&I Interruptible Service Effective: March 2018 revenue month Energy bills due in April
East Central Energy Rate schedule C&I C&I Interruptible Service Effective: March 2018 revenue month Energy bills due in April Availability This service is available to all non-residential members who agree
HAWAIIAN ELECTRIC COMPANY, INC.
SHEET NO. 49.15-A RULE NO. 27 Net Energy Metering Plus A. ELIGIBLE CUSTOMER-GENERATOR The Net Energy Metering Plus ( NEM+ ) Program is available to existing Eligible Customer- Generators under the Company
RATE 734 RATE FOR ELECTRIC SERVICE INDUSTRIAL POWER SERVICE FOR AIR SEPARATION & HYDROGEN PRODUCTION MARKET CUSTOMERS
NORTHERN INDIANA PUBLIC SERVICE COMPANY Original Sheet No. 77 TO WHOM AVAILABLE Sheet No. 1 of 7 Available to Industrial Customers primarily in the air separation and hydrogen production process industry
MAHARASHTRA ELECTRICITY REGULATORY COMMISSION
MAHARASHTRA ELECTRICITY REGULATORY COMMISSION Maharashtra Electricity Regulatory Commission (Standards of Performance of Distribution Licensees, Period for Giving Supply and Determination of Compensation)
GENERAL RULES AND REGULATIONS Applicable to Electric Service. Table of Contents RULE SUBJECT SHEET NOS.
NORTHERN INDIANA PUBLIC SERVICE COMPANY Original Sheet No. 6 Table of Contents RULE SUBJECT SHEET NOS. 1. Definitions 7, 8, 9,10, 11 2. Tariff on File 12 3. Character of Service 13, 14 4. Application,
Soft Response Generation and Thresholding Strategies for Linear and Feed-Forward MUX PUFs
Soft Response Generation and Thresholding Strategies for Linear and Feed-Forward MUX PUFs Chen Zhou, SarojSatapathy, YingjieLao, KeshabK. Parhiand Chris H. Kim Department of ECE University of Minnesota
Superseding REVISED Sheet No. 38 REVISED SHEET NO. 38 Effective March 20, 2008 Effective February 6, 2014 RULE NO. 18. Net Energy Metering
Superseding REVISED Sheet No. 38 REVISED SHEET NO. 38 Effective March 20, 2008 Effective February 6, 2014 A. ELIGIBLE CUSTOMER-GENERATOR RULE NO. 18 Net Energy Metering Net energy metering is available
INVITATION FOR QUOTATION. TEQIP-III/2018/uiet/Shopping/72
INVITATION FOR QUOTATION TEQIP-III/2018/uiet/Shopping/72 08-Feb-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
Energy Storage Systems (ESS): Preparing to Deal with the Hazards
2017 NFPA Conference & Expo Energy Storage Systems (ESS): Preparing to Deal with the Hazards Presented by: Skip Donnell Engineering Manager Liberty Mutual Insurance Legal Disclaimer: Course Focus & Limitations
Q50 Facility Study. By Tucson Electric Power Company Transmission Planning March 7, Proposed Point of Interconnection: Vail Fort Huachuca 138kV
Q50 Facility Study Proposed Point of Interconnection: Vail Fort Huachuca 138kV By Tucson Electric Power Company Transmission Planning March 7, 2018 PREPARED BY: FACILITY STUDY PREPARED FOR: TUCSON ELECTRIC
Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less) City: State: Zip Code:
Section 466.APPENDIX C Levels 2 to 4 Application Level 2, Level 3 & Level 4 Interconnection Request Application Form (Greater than 25 kw to 10 MVA or less) Interconnection Customer Contact Information
Central Texas Electric Cooperative, Inc. Tariff for Electric Service
340 Interconnection with Distributed Generation Section 340 of this tariff and all subsections thereof apply to the interconnection and parallel operation of all qualifying (QF) and non-qualifying (NQF)
New York State Public Service Commission
PSC NO. 220 ELECTRICITY ADDENDUM TYPES: SIR NIAGARA MOHAWK POWER CORPORATION ADDENDUM NO. 9 INITIAL EFFECTIVE DATE: NOVEMBER 2, 2018 STAMPS: ISSUED IN COMPLIANCE WITH ORDER IN CASE 18-E-0018 Issued October
RECITALS. Now, Therefore, in consideration of the mutual covenants and agreements herein set forth, the Parties do hereby agree as follows:
LEE COUNTY ELECTRIC COOPERATIVE STANDARD INTERCONNECTION AGREEMENT FOR CUSTOMER-OWNED RENEWABLE GENERATION SYSTEMS GREATER THAN 100 KW AND LESS THAN OR EQUAL TO 1 MW TIER 3 This Interconnection Agreement
Xantrex XW Power System Xantrex XW / Xantrex XW / Xantrex XW /240 60
Xantrex XW Power System Xantrex XW4024 120/240 60 Xantrex XW4548 120/240 60 Xantrex XW6048 120/240 60 Installation Guide www.schneider-electric.com Xantrex XW Power System Installation Guide www.schneider-electric.com
Steuben Rural Electric Cooperative, Inc. Member-Owned Distributed Generation Interconnection Information Packet
Steuben Rural Electric Cooperative, Inc. Member-Owned Distributed Generation Interconnection Information Packet Member-Owned Distributed Generation Application Procedures (For single-phase attachment of
Indexed as: BCSSAB 21 (1) IN THE MATTER OF THE SAFETY STANDARDS ACT SBS 2003, Chapter 39
Date Issued: July 12, 2010 File: SSAB 21-10 Indexed as: BCSSAB 21 (1) 2010 IN THE MATTER OF THE SAFETY STANDARDS ACT SBS 2003, Chapter 39 AND IN THE MATTER OF an appeal to the British Columbia Safety Standard
APPENDIX A - GLOSSARY
APPENDIX A - GLOSSARY 1. Photovoltaic (PV) or Solar (interchangeable): These are devices that generate electricity directly from sunlight via an electronic process that occurs naturally in certain types
Chapter 7. Registers & Register Transfers. J.J. Shann. J. J. Shann
Chapter 7 Registers & Register Transfers J. J. Shann J.J. Shann Chapter Overview 7-1 Registers and Load Enable 7-2 Register Transfers 7-3 Register Transfer Operations 7-4 A Note for VHDL and Verilog Users
DS3 System Services Protocol Regulated Arrangements
DS3 System Services Protocol Regulated Arrangements DS3 System Services Implementation Project 12 December 2017 Version 1.0 Contents 1 Introduction... 4 1.1 Service Provider Intermediary for a Providing
B. Document source: Risk assessment by: Organization: Date: SIF specification issued by: Organization: Date:
This form is one of the results of the research project SafeProd supported by VINNOVA (Swedish Agency for Innovation Systems). More information about the project could be found at. Page 1 A. Document issued
8508A Reference Multimeter Extended Specifications
8508A Reference Multimeter Extended Specifications General Specifications Specifications Power Voltage 115 V Setting...100 V to 10 V rms designed for additional voltage fluctuations 10 %. 30 V Setting...00
ARKANSAS PUBLIC SERVICE COMMISSION
3 rd Revised Sheet No. P9.1 Schedule Sheet 1 of 8 Replacing: 2 nd Revised Sheet No. P9.1 9.0. SERVICE REGULATIONS 9.1. REGULATORY AUTHORITY The Arkansas Legislature has delegated authority to the Arkansas
DS3 System Services Protocol Interim Arrangements
DS3 System Services Protocol Interim Arrangements DS3 System Services Implementation Project August 2017 Version 2.1 Contents 1 Introduction... 3 2 Governance... 5 3 Compliance Requirements... 6 4 Performance
Supersedes: 9/01/11 (Rev.5) Preparer: Owner: Approver: Team Member, North America Process Safety Center of Expertise
Procedure No.: BC032.019 Page: 1 of 12 Preparer: Owner: Approver: Team Member, North America Process Safety Center of Expertise Manager, North America Process Safety Center of Expertise Sr. Vice President,
WITNESSETH: WHEREAS, This Agreement does not address the sale of electricity to or from Consumers; and
GENERATOR INTERCONNECTION & OPERATING AGREEMENT FOR CATEGORY 3 5 PROJECTS WITH AGGREGATE GENERATOR OUTPUT OF GREATER THAN 150 kw BETWEEN CONSUMERS ENERGY COMPANY AND (PROJECT DEVELOPER NAME) GENERATOR
MRX-30 Owner s Manual
MRX-30 Owner s Manual Introduction: The MRX-30 Advanced Network System Controller is designed to meet the needs of large residential or small commercial environments. Only Total Control 2.0 software, products,
Implementation Plan Project PRC-005 FERC Order No. 803 Directive PRC-005-6
PRC-005-6 Standards Involved Approval: PRC-005-6 Protection System, Automatic Reclosing, and Sudden Pressure Relaying Maintenance Retirement: PRC-005-5 Protection System, Automatic Reclosing, and Sudden
SALT RIVER PROJECT SMALL GENERATOR INTERCONNECTION PROCEDURES (SGIP) (For Generating Facilities No Larger Than 20 MW)
Improvement and Power District Original Sheet No. P-1 SALT RIVER PROJECT SMALL GENERATOR INTERCONNECTION PROCEDURES (SGIP) (For Generating Facilities No Larger Than 20 MW) Approved by SRP Board of Directors:
SPP Reserve Sharing Group Operating Process
SPP Reserve Sharing Group Operating Process Effective: 1/1/2018 1.1 Reserve Sharing Group Purpose In the continuous operation of the electric power network, Operating Capacity is required to meet forecasted
The DAT210 board on all Plasma Block products contains 10 LED s which are used to indicate status during normal operation, board programming and
The DAT210 board on all Plasma lock products contains 10 LED s which are used to indicate status during normal operation, board programming and troubleshooting of the unit. Documentation DAT210 oard LED
OPERATIONAL INVESTMENTS
EB-0-0 Tab Schedule Page of OPERATIONAL INVESTMENTS REACTIVE CAPITAL Reactive capital investment includes funds for the replacement of failed distribution components and the restoration of system reliability.
Smart Grid Small Generator Interconnection Procedures For Distributed Generators Less than 10 MW Connected in Parallel with LIPA s Radial
Smart Grid Small Generator Interconnection Procedures For Distributed Generators Less than 10 MW Connected in Parallel with LIPA s Radial Distribution Systems Revised January 1, 2017 TABLE OF CONTENTS
Policy Bulletin No. 25 Net Metering. Public Utility District No. 1 of Klickitat County 1313 South Columbus Goldendale, WA 98620
Policy Bulletin No. 25 Net Metering Public Utility District No. 1 of Klickitat County 1313 South Columbus Goldendale, WA 98620 Interconnection Agreement For Net Energy Metering With Customer Solar, Wind,
EXHIBITOR ORDER FORM
Video Equipment DVD Player $ 100.00 22" LCD Monitor $ 175.00 42 LCD Monitor $ 500.00 50 LCD Monitor $ 600.00 70" LCD Monitor w/stand $ 700.00 LCD Projector (WXGA) w/stand & 6 Screen $ 750.00 OTHER MONITOR