TEST REPORT Job No./Report No. TR R1 DATE :August Page 1 of 10

Transcription

1 TEST REPORT Job No./Report No. TR R1 DATE :August Page 1 of 10 SAB ELEKTRONİK MAK.DAY. TÜK. MALL.SAN.TİC.A.Ş. KOS T.ZİYAEDDIN CAD. 8.SOK. NO:3 KONYA TEL: FAX: info@sab.com.tr For the attention of DURMUŞ KARAKAYA The following sample(s) was/were submitted and identified by/on behalf of the clients as: Sample Submitted By : SAB ELEKTRONİK MAK.DAY. TÜK. MALL.SAN.TİC.A.Ş. Sample Description : Satellite Dish Model No : S&Y PO No/Ref.No : Not Given Client : Not Given End Use : Not Given Sample Receiving Date : July Testing Period : July July Service Type : NORMAL Test Requested : Selected test (s) as requested by client. Test Method : Please refer to next page(s) Test Result(s) : Please refer to next page(s) Conclusion : Based on the performed tests on submitted samples the result complies with the RoHS Directive 2002/95/EC and its subsequent amendments. The test results relate only to the items tested only. The report shall not be reproduced except in full without the written approval of the laboratory. Test reports without SGS seal and uthorized person signature are invalid.the reported uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2 providing a level of confidence of approximately 95% the uncertainty evaluation has been carried out in accordance with UKAS/ISO requirements.this results do not include uncertainties. Opinions and interpretations expressed herein are outside of the scope of UKAS Accreditation.Tests marked (*) in this Test Report are not included in the UKAS Accreditation Schedule for this Laboratory. THIS REPORT SUPERSEDES OUR REPORT NO DATED Issued in Istanbul For and on behalf of Servisleri A.Ş. Neslihan Erol Lab. Customer Services Coordinator Nazlı Şahin Laboratory Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

2 TEST REPORT Job No./Report No. TR R1 DATE :August Page 2 of 10 Test Part Description : No.1: Main big body No.2: Big Metallic part No.3: Medium metallic part Test Item(s): Unit Test Method Results MDL Limit Cadmium(Cd) mg/kg With reference to IEC Lead (Pb) mg/kg With reference to IEC Mercury (Hg) mg/kg With reference to IEC Hexavalent Chromium (CrVI) by Spot test -- With reference to IEC 62321:2008 n.d. n.d. n.d Negative Negative Negative - # (d) #:Positive means the presence of CrVI on the tested areas Negative means the absence of CrVI on the tested areas This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

3 TEST REPORT Job No./Report No. TR R1 DATE :August Page 3 of 10 No.4: Long metallic part No.5: Small metallic part No.6: square metallic part Test Item(s): Unit Test Method Results MDL Limit Cadmium(Cd) mg/kg With reference to IEC Lead (Pb) mg/kg With reference to IEC Mercury (Hg) mg/kg With reference to IEC Hexavalent Chromium (CrVI) by Spot test -- With reference to IEC 62321:2008 n.d. n.d. n.d n.d. n.d Negative Negative Negative - # (d) #:Positive means the presence of CrVI on the tested areas Negative means the absence of CrVI on the tested areas This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

4 TEST REPORT Job No./Report No. TR R1 DATE :August Page 4 of 10 No.7: Thick screw No.8: Thin screw No.9: Medium screw Test Item(s): Unit Test Method Results MDL Limit Cadmium(Cd) mg/kg With reference to IEC Lead (Pb) mg/kg With reference to IEC Mercury (Hg) mg/kg With reference to IEC Hexavalent Chromium (CrVI) by Spot test -- With reference to IEC 62321:2008 n.d. n.d. n.d Negative Negative Negative - # (d) #:Positive means the presence of CrVI on the tested areas Negative means the absence of CrVI on the tested areas This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

5 TEST REPORT Job No./Report No. TR R1 DATE :August Page 5 of 10 No.10: Thick screw No.11: Thin screw No.12: Medium screw Test Item(s): Unit Test Method Results MDL Limit Cadmium(Cd) mg/kg With reference to IEC Lead (Pb) mg/kg With reference to IEC Mercury (Hg) mg/kg With reference to IEC Hexavalent Chromium (CrVI) by Spot test -- With reference to IEC 62321:2008 n.d. n.d. n.d Negative Negative Negative - # (d) #:Positive means the presence of CrVI on the tested areas Negative means the absence of CrVI on the tested areas This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

6 TEST REPORT Job No./Report No. TR R1 DATE :August Page 6 of 10 No.13: Black platic part No.14: Black plastic part Test Item(s): Unit Test Method Results MDL Limit Cadmium(Cd) mg/kg With reference to IEC 62321:2008 and performed by Lead (Pb) mg/kg With reference to IEC 62321:2008 and performed by Mercury (Hg) mg/kg With reference to IEC 62321:2008 and performed by Hexavalent Chromium (CrVI) mg/kg With reference to IEC 62321:2008 and performed by UV-VIS n.d. n.d n.d. n.d n.d. n.d n.d. n.d This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

7 TEST REPORT Job No./Report No. TR R1 DATE :August Page 7 of 10 No.13: Black platic part No.14: Black plastic part Test Item(s) (s): Unit Test Method Results MDL Limit Sum of PBBs mg/kg With reference to IEC 62321:2008 and n.d. n.d Monobromobiphenyl mg/kg With reference to IEC 62321:2008 and Dibromobiphenyl mg/kg With reference to IEC 62321:2008 and Tribromobiphenyl mg/kg With reference to IEC 62321:2008 and Tetrabromobiphenyl mg/kg With reference to IEC 62321:2008 and Hexabromobiphenyl mg/kg With reference to IEC 62321:2008 and Pentabromobiphenyl mg/kg With reference to IEC 62321:2008 and Heptabromobiphenyl mg/kg With reference to IEC 62321:2008 and Octabromobiphenyl mg/kg With reference to IEC 62321:2008 and Nonabromobiphenyl mg/kg With reference to IEC 62321:2008 and Decabromobiphenyl mg/kg With reference to IEC 62321:2008 and This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

8 TEST REPORT Job No./Report No. TR R1 DATE :August Page 8 of 10 Sum of PBDEs mg/kg With reference to IEC 62321:2008 and Monobromodiphenyl ether mg/kg With reference to IEC 62321:2008 and Dibromodiphenyl ether mg/kg With reference to IEC 62321:2008 and Tribromodiphenyl ether mg/kg With reference to IEC 62321:2008 and Tetrabromodiphenyl ether mg/kg With reference to IEC 62321:2008 and Pentabromodiphenyl ether mg/kg With reference to IEC 62321:2008 and Hexabromodiphenyl ether mg/kg With reference to IEC 62321:2008 and Heptabromodiphenyl ether With reference to IEC 62321:2008 and mg/kg Octabromodiphenyl ether With reference to IEC 62321:2008 and mg/kg Nonabromodiphenyl ether With reference to IEC 62321:2008 and mg/kg Decabromodiphenyl ether ## With reference to IEC 62321:2008 and mg/kg n.d. n.d (d) ## = The exemption of DecaBDE in polymeric application according 2005/717/EC was overruled by the European Court of Justice by its decision of Subsequently DecaBDE will be included in the sum of PBDE after (f) - = Not regulated This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

9 TEST REPORT Job No./Report No. TR R1 DATE :August Page 9 of 10 PHOTO APPENDIX This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381

10 TEST REPORT Job No./Report No. TR R1 DATE :August Page 10 of 10 ***End of Report*** This document is issued by the Company subject to its General Conditions of Service printed overleaf available on request or accessible at Attention is drawn to the limitation of liability indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company s findings at the time of its intervention only and within the limits of Client s instructions if any. obligations under the transaction documents. This document cannot be reproduced except in full without prior written approval of the Company. Any unauthorized alteration forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to Abide-i Hürriyet Cad. Geçit Sk. No : 10 K: Şişli 34381