Sonoma County Office of Education Information Technology INTERIM SACS2017ALL MANUAL PART 1 OF 2

Transcription

1 Sonoma County Office of Education Information Technology INTERIM SACS2017ALL MANUAL PART 1 OF 2 IT Department October 20, 2017

2 BLANK PAGE Interim Reporting Page 2

3 INTERIM SACS2017ALL MANUAL Part 1 of 2 TABLE OF CONTENTS Part 1 Preparing the First Interim Report SECTION 1.A SEQUENCE OVERVIEW FOR SACS2017ALL 4-6 SECTION 1.B UPDATE SACS2017ALL VALIDATION TABLES SECTION 1.C IMPORT ADOPTED BUDGET INTO SACS2017ALL SECTION 1.D EXTRACT/DOWNLOAD INTERIM FINANCIAL DATA D.1 - EXTRACT FROM ESCAPE 1.D.2 - IMPORT INTO SACS2017ALL Part 2 Reference Information SECTION 2.A SACS SOFTWARE USER GUIDE. 16 SECTION 2.B HOW TO CLEAN UP ACCOUNTS IN ESCAPE 2.B.1 - ACCOUNTS RECEIVABLES (A/R) CLEARING B.2 - ACCOUNTS PAYABLE (A/P) CLEARING 19 2.B.3 GENERAL JOURNAL CLEARING B.4 - INVALID/EXPIRED ACCOUNTS WITH BALANCES B.5 RESTRICTED/UNRESTRICTED ACCOUNT VERIFICATION 24 SECTION 2.C HOW TO UPDATE BUDGET IN ESCAPE 2.C.1 BUDGET TRANSFERS C.2 SPREADSHEET IMPORT METHOD C.3 BUDGET MODEL REVISIONS METHOD SECTION 2.D SACS2017ALL KNOWN ISSUES ***Open Lab October 27, pm for LCFF and Budget Model Revisions*** Interim Reporting Page 3

4 Part 1 Preparing the First and Second Interim Report Section 1.a - Sequence Overview For the interim report process, this sequence of events seems to produce the best results with the least amount of extra work. If you do have problems, contact your IT analyst or your SCOE accountant for assistance. Pages of the Software Users Guide contain a more detailed version of the Interim process. Go to Table of Contents and use Ctrl+Click to get to section in guide. a) Complete the update of the SACS2017ALL Validation Tables for the new state codes and combinations. The current software, SACS2017ALL, contains tables from the early June 2017 release and there may have been several state matrix updates since that time. b) Export/Import Export budget data from the SACS2017 Budget software to import into the SACS2017ALL software. The addition of the budget data file from the SACS2017 software will allow the interim software to automatically pull the Original Budget data when needed. c) Make changes to any of your budget data forms in the Budget period (preference reporting period, Single Budget, July 1) of the SACS2017ALL software. Your accountants will have notified you if there are any updates that should be made to your data before starting into the Interim process. d) Define the LEA and Reporting Period. Remember to change your software preferences to reflect the interim period before you actually import the Excel file from Escape. The date on the preference screen will automatically change to the correct fiscal year when you select the Interim button. If your periods do not match during the import process a warning message will appear stating that the Importation has been discontinued due to Errors found during Prescan. e) Import the Excel file you created from the Escape system. Remember both the name and location of your exported file. The import process is done from within the Import section of the File menu. Locate your file name from whichever folder you saved it by using the browse function located on the Import screen. Once identified, select the file and click twice. The select the black import button at the bottom of the resulting screen. Close the menu screen upon completion. f) Open the Supplemental section within the Forms menu. g) Select the Al-Average Daily Attendance form. Open the form and enter the information required. Save and print the form. This must be done as the ADA figures are pulled over to the Criteria and Standards Review form and used for identifying your required reserve level. h) A Cash Flow report is required. Watch that you do not open and save this form if you will not be using the software version. IF you are using this form, watch for changes in the format. You should be reviewing cash flow on an ongoing basis. Fill in the form, save and print it. You can use your own form or you can use the one provided by the State software within the Supplemental section of the Forms menu. Interim Reporting Page 4

5 The software version of the report will carry forward to the second Interim period without the need to re-key the data. i) Perform all four TRC module edits. (Type of Data section) This will provide validation for all general ledger data, SACS codes and combinations of codes for all columns of the Interim form. This will allow you a chance to correct any Escape data before moving too deeply into the Interim process. ***Make sure to update SACS2017ALL software*** Need TLC for TRCs? Contact your SCOE Accountant to get help to clear TRCs j) Once you are satisfied with the general ledger information, select and complete the Components of Ending Fund Balance by resource. Each new download of G/L information may change these components so remember to review this section and save any changes before moving to the Funds and Acct Group section. k) Open the Funds and Acct Groups section within the Forms menu. l) Select the 01l-General Fund Interim Report. No entry is required on this form but it must be opened and saved as a part of the process. You will need to print all three sorts: Unrestricted, Restricted, and Summary. You must open and save this form for the data to be extracted into the Multiyear Projection (MYPI) and Criteria and Standards Review (O1CSI) forms. m) A Multiyear Projection is required by the State for the current year and the subsequent two years. You can use either the form available within the SACS software (MYPI) or you may use the Excel spreadsheet available from your SCOE accountant. Watch that you do not open and save this form if you will not be using the software version. TRC errors will be created that will require an explanation if the form is saved and not used. These errors will require and explanation. If you are using the SACS provided form, you will need to complete the forms in sequence to allow the summary level reports to calculate correctly. If you are using the software version Forms 01 and Form AI must be completed and saved before opening the MYPI. You will need to complete the multiyear projection spreadsheets for all unrestricted, restricted, and combined information. Save and print the forms. If you are not using the SACS form you must include the spreadsheet as an attachment to your containing the remaining required interim forms. n) Complete and Save Form MYPIO, if using the SACS format, for each fund other than the general fund, with a projected negative ending fund balance. o) Open the Criteria and Standards Review under the Forms menu. Scroll through the form to verify extracted data. Enter any additional data required and completely explain any variance where necessary, such as Status of Negotiations, FTE s, Long Term Debt, Etc. Save and print the form. Forms 01I, Form AI, Form CASH (if using software version) and Form MYPI (if using software version) must be opened and saved before completing the Criteria and Standards Review. p) Select and open the Cl - Certification form. Enter the date of your board meeting and certification choice. Review the Criteria and Standards Review Summary for any areas of potential concern for fiscal solvency. Save and print the form. Interim Reporting Page 5

6 q) From the Forms tab, select the Table of Contents Print or review the form to insure all applicable forms have been completed. This form is automatically updated as you open and save the various forms you complete during the interim process. You may find it helpful to compare the Table of Contents to Attachment A in the Software User Guide, page 265, for completeness. In addition, all individual forms can be printed from the Table of Contents. r) Select the Technical Review Checklist (TRC) tab menu. Again, run all four of the TRC modules in the Types of Data section for a final validation of SACS codes and combinations of codes, forms that have unbalanced or incomplete data and forms that will need to be reopened and saved due to dependency checks. Fatal exceptions must be corrected; warning exceptions must be either corrected or explained; informational exceptions should be corrected or explained. Print the corrected results. s) Export.dat file by deadline December 15, 2017 (First Interim) and March 15,2018 (Second Interim). See list of items to submit to your SCOE Accountant in Part 2 of 2 Manual. NOTE: The Special Education Maintenance of Effort report (Report SEMAI), found within the Reports menu of the Interim reporting periods, should be completed only after all the above steps relating to fund reporting are completed. Interim Reporting Page 6

7 Section 1.b - Update of the SACS2017ALL Validation Tables It's important to update SACS2017ALL software with the latest version. Step 1 -- Downloading the Most Current Tables 1. Go the website 2. Click on Validation Table Files (EXE; Revised 6-Oct-2017) 3. A "File Download" or "Save As" window will open, depending on your operating system 4. Click "Save to save in your C:\SACS2017ALL\Update folder 5. Close the Download Complete box and close your Internet browser. Step 2 -- Unzipping the Vtables.exe Files 1. Locate the file in your Downloads to Unzip. 2. Double-click on the vtables.exe file to open the WinZip self-extractor window. The default folder for the unzipped files should be C:\SACS2017ALL\Update. Interim Reporting Page 7

8 3. Make sure the "Overwrite Silently" box is checked to overwrite the existing validation tables with the current ones, and then click on Extract. 4. Close the WinZip Self-Extractor window. 5. Verify that your Update directory has 12 updated.txt files, one.xls file and one.doc file. The.doc file is a Microsoft Word document that explains the validation table changes in detail. The.xls file is an Excel spreadsheet that contains a summarized list of the code combinations affected by this table update. If anything else is present in this folder the update process (next step) in the SACS2017ALL software will not complete successfully. 6. The easiest way to verify that the files have been updated successfully is to see the dates of the files displayed on the right should reflect the date of latest file update. Interim Reporting Page 8

9 Step 3 -- Running the Update After the validation tables have been downloaded from the CDE and unzipped into the Update subdirectory, the SACS software Update Validation routine must be run. 1. Open the SACS2017ALL software on your desktop 2. Go to File; Click Update Validation 3. Click Yes for the Directory ALL the latest combination and description file in C:\SACS2017ALL\Update 4. This process will take several minutes. You will be able to see the program finding the files and then replacing them with the new ones. 5. Once the Update is Complete, Click on Close, then click on OK The validation table has been updated. Interim Reporting Page 9

10 Section 1.c - Import Adopted Budget Data into SACS2017ALL Districts can export the Budget period data from the SACS2017 Budget Software into the SACS2017ALL Budget Software. Allowing the budget period data to be available for extraction into the Interim Criteria and Standards Review Form (Form 01CSI), significantly reducing the amount of data key entry required on the form. The Budget period data may be exported using either the Official or Other option in SACS2017 Budget Software, the state recommends importing only the Officially exported budget period data into the SACS2017ALL Budget Software to ensure the most clean and accurate budget data extract into the interim Criteria and Standards Review Form. 1. How to import the Budget file into SACS2017ALL There are two methods for 1 st Interim Only: Method 1 Locate the previously exported Budget File (aka.dat file), the one that was sent to the accountants. Method 2 IF Unable to locate the.dat file that was sent to your accountants. Go to SACS2017ALL Budget Software Open the SACS2017 Budget Software Go to Setup Go to File Preferences LEA Preferences Tab should have your district listed as the LEA. If it does not make sure to select your district. Select the correct Budget reporting period, example: Budget, July 1 Select Export Create a new official.dat file Choice of Official or Other Remember to note the folder where the.dat file is exported to. Click the Export Box Save/Close Go to File, Select Import Close the SACS2017 Budget Software Click on the Official Import Option Open the SACS2017ALL Software Select Setup from the Main Menu options Click on the Other for the import designation if your file is not an Official export. Go to Setup Preferences LEA Preferences Tab should have your district listed as the LEA. If it does not make sure to select your district. Interim Reporting Page 10

11 CONTINUE METHOD 1 CONTINUE METHOD 2 Click on the Browse button to locate the budget period Data file that was officially exported from the SACS2017 Software Select the correct Budget reporting period, example: Budget, July 1 Click on the Import Button (left bottom) Save/Close Go to File, Select Import Click on the Official Import Option Cli ck on the Other for the import designation if your file is not an Official export. Click on the Browse button to locate the budget period Data file that was officially exported from the SACS2017 Software Click on the Import Button (left bottom) 2. To view the Budget period data, keep the LEA Preferences set to the budget reporting period. If changes are needed to the budget Criteria and Standards and other budget forms it is recommended that you make those changes. Make the changes in the budget period of the SACS2017ALL software. It is not necessary to go back to the SACS2017 Budget Software, at this point make all corrections in the SACS2017ALL Budget Software. 3. Once you change Preferences in the SACS2017ALL Software to the 1 st Interim reporting period and have opened and saved any required Interim Forms opened the Interim Criteria and Standards Review Form the applicable data from the budget period will automatically extract into any forms/sections that pull data from the budget period. 4. Budget period data WILL NOT extract into the Unaudited Actuals reporting period. Interim Reporting Page 11

12 Section 1.d.1 - Extract Interim Data from Escape The SACS extraction path for Escape is as follows: 1. Go to Finance - Reports Fiscal- Fiscal 51 SACS Extract Create a Favorite! Save Time 10/31/2017 or later depending on Board Approval 2. Section 2- User Options Fiscal Yr. = 2018 {2017/2018} (Is default) 3. Skip Section 3- Original Budget Reporting Period 4. Section 4- Interim Budget Reporting Period select- Reporting Period = Above example is for 1 st Interim, but you have the following options depending upon the actual Interim Reporting Period Interim Reporting Page 12

13 Beginning Fund Balance from Adopted (column IO)? = Y (Yes-Use Adopted Budget amounts) to use the estimated Beginning Balance from Budget Adoption Board Approved Operating Budget = 10/31/2017 (First Interim ) / January 31, 2018 (Second Interim) or later depending on the Board Approved Budget updates (Column B of SACS Form 01I) Projected Year Totals Date = Leave Blank to default to Board Approved Operating Budget date or later date to capture all necessary Budget updates to be included in Interim report (Column D of SACS Form 01I) This is as of transaction date for journal entries affecting revised budget accounts. ***Leave all other report sections as they are*** Click on Go/Export icon at the top Escape menu bar -Select the Excel Data option The report will appear on your screen: (usually behind your open Escape session) Interim Reporting Page 13

14 5. From the File tab in Excel, select Save As- a. Save As: Save the file anywhere on your computer (recommend to your desktop)- The saving default is to a temp folder so be sure to note/remember where you save it. b. File Name: Name the file The file name should be meaningful to you. c. Save As Type: Formatted Text (Space delimited) (*.prn) 6. Save your file. The file will save as a.prn file that the SACS software can import Remember that as you save this file the Excel program will let you know some of the features will not be the same as your original file, save the file anyway. Interim Reporting Page 14

15 Section 1.d.2 - Import Escape Data to SACS2017ALL 1. Open SAC2017ALL Software 2. Select the LEA 3. Reporting Period: First Interim 4. Save/Close 5. Go to File; Select Import 6. Browse for the location and file name of your saved Escape 1 st Interim file 7. Click Import on bottom of page 8. Click Close and Go to Technical Review If you have errors here you will need to correct them in Escape and then perform the Extract and Import process again. Preparation here will save you time later on during the completion of the Interim forms. Interim Reporting Page 15

16 Part 2 - Reference Information Section 2.a - State Software User Guide Key Reference Pages After you have downloaded SACS2017ALL the Software User Guide can be found in your ( C) Drive in Calendars and Manuals folder. From the SACS Manual Table of Contents use Ctrl +F to find key words, when highlighted use Ctrl + Click on mouse to bring to page in manual. These are key items to have ready to help make the process easier to complete. 1.Budget Narrative Tips Refer to Manual Part 2 of 2 2. Average Daily Attendance - Form Al Software User Guide, page Cashflow Worksheet Form CASH Software User Guide, page Certification Page Form CI Software User Guide, page Multiyear Projection/Other Funds Form MYPI0 Software User Guide, page Criteria and Standards Form 01CSI Software User Guide, page Long Term Commitments Audit Report Software User Guide, page Charter School Financial Reports Software User Guide, page Multiyear Projection Form MYPI Software User Guide, page 140 Interim Period Form Dependencies Dependent Forms (save these forms in this order) Forms Dependent on Funds (GL) 01I 01 CASH 01, 62 MYPI 01I, AI MYPIO All applicable funds except 01 01CSI 01I, AI, CASH, MYPI All applicable funds CI 01CSI SEMAI 01, 09, 62 To avoid a cyclical CHK-DEPENDENCY Exception, the forms should be opened and saved in the order listed above in the "Dependent Forms" column. Interim Reporting Page 16

17 Section 2.b.1 - Clean up Prior Year Accounts Receivables (A/R) Begin Reviewing Prior Year AR/Payables and clear out as many as possible prior to October 31. Go to Finance Reports Ledger Ledger02 Receivables/Liabilities Activity Section 2 User Options Closing Year 2017 {2016/2017} A/R or A/P From drop down select one or both Cleared Items NO to limit items that have not cleared Unposted JE? - YES to review unposted Journal Entries Create Favorites for A/P and A/R Save Time! After review of the report you may need to reverse the system created AR or Prior Year Accounts Payable journals. The following is the standard process to cancel or manually complete any AR s or Prior Year Payables needing attention. Interim Reporting Page 17

18 AR Clearing 9229 Accounts Receivable (Current Year) 9210 Accounts Receivable (Prior Year) The year-end closing Asset/Liability Roll moves the entire balance from 9229 object code and creates the beginning balance for 9210 object code in the new fiscal year. Clear AR Procedures When an AR Invoice was setup and not received (Manually Complete) Go to Finance AR - Invoices o Blank out the Fiscal Year field on search screen o Enter the AR needing to be closed o Make no changes to the Accounts tab o From the Task menu, select Manually Complete ****Do Not Return to Open from the Task menu) *** o A system journal will be created in the new fiscal year that will credit 9210 and debit 8XXX revenue for the amount that was not received and clear the Ledger02 Report Interim Reporting Page 18

19 Section 2.b.2 - Clean up Prior Year Accounts Payables (A/P) AP Clearing 9529 Accounts Payable Setup (Current Year) 9510 Accounts Payable (Prior Year) The year-end closing Asset/Liability Roll moves the entire balance from 9529 object code and creates the beginning balance for 9510 object code in the new fiscal year. Clear AP Procedures When a Prior Year Payable was setup and not paid against (Manually Complete) Go to Finance Requisitions Vendor Requisitions o Blank out the Fiscal Year field on search screen o Enter the vendor requisition needing to be closed Make no alterations to the Accounts tab o From the Task menu, select Manually Complete if the requisition has not been paid against ***DO NOT Return to Open from the Task menu*** o A journal will be created in the new fiscal year that will debit the 9510 object and credit the expense by the amount either over or under the established amounts and clear the Ledger02. Interim Reporting Page 19

20 Section 2.b.3 General Journal Clearing Manual A/R or A/P journals created during year-end will need to be reversed manually in 2017/2018 fiscal year once the accrued dollars have been received or have been determined they will not be received. Two methods: Task to Reverse or create new JE to Reverse Accounts Go To Finance Fiscal Journal Entries Search for the JE to Reverse From the list go to TASK to select Reverse **Be careful because it will reverse all JEs on the list** This will create a new JE that will reverse all the lines Go to Task to Submit or Approval Override Go To Finance Fiscal Journal Entries Click NEW to create a manual JE for accounts that need to be reversed Enter a Comment Go to TASK to Submit or Approval Override Don t forget Escape How-To or Tutorial Tools if you need assistance or send an to helpdesk@scoe.org. Interim Reporting Page 20

21 Section 2.b.3 - Invalid/Expired Accounts with Dollars As part of your cleanup process, you will want to review invalid or expired accounts that may have balances. The Fiscal 50 report should be reviewed for invalid account combinations that have associated dollars. **If you have errors on this report you will have errors on SACS TRC report** Go to Finance Reports - Fiscal - Fiscal50 SACS Component Validation Errors Fiscal Year: 2018 {2017/2018} Show: Both problems by Account and accounts by Problem Activity: No-DO NOT show Accounts with no activity For this reporting period concentrate on the errors that have balances as shown below. You will want to do Journal Entry to correct the expenses prior to beginning the interim process to be sure your fund statements are as correct as possible. Interim Reporting Page 21

22 Example: Management code ZERR is used in Escape for mapping errors in Payroll and AP Processing so that production is not stopped, but is invalid for SACS Reporting. If balances exist in these accounts, you will want to do a JE to correct expenses. Run PAY10 Labor Distribution Detail Go to HR/Payroll-Reports-Payroll-PAY10 Starting Pay Date: 7/1/2017 Ending Pay Date: 6/30/ Account Selection: Object: 1-3 is default Management: ZERR This report will allow you to see employee activity to help determine where to journal the expense. NOTE: ZERR is due to an invalid account on a position, then you will want to update account in position. DO NOT journal the encumbrance, it will correct itself when Payroll is processed. Interim Reporting Page 22

23 Find Expired Accounts With Balances Go to Finance Setup - Chart of Accounts Accounts Section 2 Other Include Expired: YES Review if expired accounts have dollars attached Need to journal expense or unexpired the account Or use TASK to Clear the Expiration Date Be careful because this will expire the list of accounts in the selection, may want to narrow search. Interim Reporting Page 23

24 Section 2.b.4 - Restricted/Unrestricted Account Code Verification The Fiscal 13 can be run for Restricted and Unrestricted accounts as verification of your SACS statements. If the reports do not match, check for account strings that have defaulted to Restricted that should not be. NOTE: For all components, except for Resource the restricted flag should always be NO Go to Finance Setup Chart of Accounts Account Components Enter the Component = Management Select Go This situation occurs when you add a new component and do not change the Restricted field before you save the entry. It is very easy to miss that you need to change the flag because this is not a required field. Go to Finance Setup Chart of Accounts Accounts Components Enter the Component Value that needs to be changed Click Go Once the screen appears change the Restricted field from Yes to No. Save/Close Once you change the component to Unrestricted any account code strings that were created while the component was considered Restricted will automatically now become Unrestricted. Interim Reporting Page 24

25 Section 2.C - Ways to Update the Budget in Escape Budget Update Processes Review/clean up your budget prior to beginning the Interim process. You are looking to present the most up to date financial position of your district on October 31, At this time we will be referring to those items you would normally be updating prior to the end of the Interim period. Four different activities within Escape that can be used to update your budget prior to Interims or at any time you would need to make a significant amount of entries to your budget. Methods: Budget Transfers, Journal Import, Budget Model and Budget Entry Section 2.c.1 - Budget Transfer Method This is the typical way that Budget Revisions are posted throughout the fiscal year Go to Finance Budget Budget Transfers Click New Enter Comment In Items section Click New to add account information In the Change column to increase or decrease accounts that need to be revised TASK to Submit or Approval Override if you have permissions Interim Reporting Page 25

26 Section 2.c.2 - Spread Sheet Budget Revision Method This method is good for times when you have already created a spreadsheet for budget changes. Unlike the Budget Management method, the spreadsheet method does not do any math for you nor does it post the journal automatically. Here are the criteria needed to format an Excel Spread Sheet to import into the Budget Import Process in Escape. For Templates Go to Online Resources Templates Journal Entry Import NO HEADER - Remove Header before importing Column A Org Id field: Numeric Column B Fiscal Year 2018 Column C Journal Type = BudRev (Numeric, 8 characters) Column D Department Id (Numeric, 8 characters) In most cases it is Business Column E - No entry for this field (numeric, 12 characters) Column F Transaction Date formatted as 10/31/2017 and requires the / s Column G - Full account string with dashes (up to 60 characters) Column H Debit field (Decrease Budget) Column I Credit field (Increase Budget) are the numeric fields you are using for changing your budget. Each field must have an entry (debit/credit/zero) May include decimals but not commas Column J - Description if you require a different description per line Otherwise the system takes the comment from the import screen. Save the file as both and Excel file and a.csv file. The import process requires the.csv format but if changes are needed then modify at the Excel level and then resave as the.csv file. Keep your naming convention simple and remember where you save files You can see that the.csv file below has been modified and no longer actually looks like the Excel file we actually saved. Interim Reporting Page 26

27 Once the file is saved, go to the journal import activity. Go To Finance Processes Journal Import Click in File to Import field to browse the.cvs file Enter a Comment Click Go Review the import before going to the next step. Click on TASK to Create Journal Entry To POST the Journal Entry Import: Once the journal is created, review before posting. In an account lookup you can see the new balance for account. This amount can be manually changed if needed. Go to TASK to Submit or Approval Override if permitted Note: The use of the Journal Import Process created an entry based exactly on the spreadsheet you created. The system did not do any math or change your entry. Interim Reporting Page 27

28 Section 2.c.3 - Budget Model Revision Method Start by updating position control with any new positions, assignments and/or FTE in your FY18 Escape system. Go to HR/Payroll Employment - Employee Management Be sure to initiate pay for all pay periods, all employees within FY18 Escape Go to: HR/Payroll Processes Initiate Payroll Requests In Budget Management create a new model for 2018 {2017/2018} Go to Finance Budget Budget Management Click New and name your model Save/Close The system will automatically know this model will be a budget revision or transfer and not an original budget model. Populate the model with the new position control data and or any other accounts you would like to update Go to TASK to select Perform Change Enter Comment Select the Type from the menu Click Go to load to model This will mass update the model with Salaries and Benefits from HR Review Model History Tab to verify the change is as expected Interim Reporting Page 28

29 Load Types into Budget Model Go to TASK and select Perform Change Enter Comment Example: Load Salaries In the Type field use the drop down to select from various transactions to Load into the Model Click GO to Load Click YES to continue Repeat Perform Change for each type that is needed in Model Once you have all transactions complete Close Model Example: Load Vacancies Type field : 10 Load Vacancies Click GO to Load Click YES to continue Load Accounts Other than Payroll Example: Load 4XXX-8XXX Type field : 08 Copy Accounts from Revised Click GO to Load Click YES to continue Replace Budget: 2 {Replace Same Item Types} Default Object Code: 4-8 Interim Reporting Page 29

30 Budget Entry Activity for Budget Model Revision Method This allows you to make manual changes to accounts that were loaded into the new model. Go to Finance Budget Budget Entry Select the Interim Model Select Search Criteria for accounts to be modified Click GO Click Open to modify the Budget Amount Click New to Add to Budget Amount Small Save/Close Big Save/Close Don t forget to POST your model once you have made all your modifications with 10/31/2017 Date or later depending on Board Approval! Click on TASK to select Post This Model Interim Reporting Page 30

31 Section 2.d SACS2017ALL Known Issues Problem: Import, Export, and TRC Menu Options Disabled for Some Windows 7/8/10 Users Right after installing the Standardized Account Code Structure (SACS) software, some users are unable to import, export, or run the Technical Review Check (TRC) because the File Import, File Export, and TRC Technical Review menu options are disabled. Fix: Some Windows 7/8/10 users have encountered this problem, and applying one or more of the following solutions has been effective: Ensure that the SACS software was installed correctly: o o o o o Temporarily change the user's level of access to that of the system administrator; Have the user log onto the network; Install the software; Change the user's level of access back to its original setting; and Restart the computer. Register the RICHTX32.OCX file. This should be done by information staff only. Change the SACS software to run in compatibility mode using Windows XP (Service Pack 3). To do this, right-click on the SACS software desktop icon; select Properties; select the Compatibility tab; if not already active, click on the Run this program in compatibility mode: check box; when the drop down menu activates, select Windows XP (Service Pack 3); press the Apply button and then OK. Problem: Known Printing Issues Relating to Windows 7 After the SACS software was modified to mitigate the worst of its incompatibilities with Windows 7, many software testers encountered a remaining printing problem where a fund form, supplemental form, or report is sent to the printer, and the SACS software print status window freezes. (This is not an issue when printing the Technical Review Checklist (TRC), the import log, or from the User Data Input/Review screen.) Workaround: Anticipating this problem for all Windows 7 users, the California Department of Education's (CDE s) workaround is to print first to Microsoft XPS Document Writer or Adobe PDF, then send the document to the printer. Interim Reporting Page 31