GRUNDFOS DATA BOOKLET TP, TPD, TPE, TPED. In-line circulator pumps 50 Hz

GRUNDFOS DATA BOOKLET TP, TPD, TPE, TPED In-line circulator pumps Hz

Contents Pump data Introduction TP, mains-operated pumps TPE, speed-controlled pumps Type key 5 Codes for shaft seal 5 Performance range Performance range, 2-pole, PN 6, 1, 16 6 Performance range, -pole, PN 6, 1, 16 7 Performance range, 6-pole, PN 16 8 Performance range, 2-pole, PN 25 9 Performance range, -pole, PN 25 1 Product range Product range, 2-pole, PN 6, 1, 16 11 Product range, -pole, PN 6, 1, 16 13 Product range, 6-pole, PN 16 15 Product range, 2-pole, PN 25 15 Product range, -pole, PN 25 16 Operating conditions System and test pressures 17 Sound pressure level 17 Ambient temperature 17 Pumped liquids Pumped liquids 18 Liquid temperature 18 List of pumped liquids 19 TP Series 1 and 2 pumps Technical data 21 Construction 21 Materials 21 Mechanical shaft seal 22 Connections 22 Features and benefits 22 TP Series 3 pumps Technical data 23 Construction 23 Materials 23 Mechanical shaft seal 23 Connections 2 Features and benefits 2 TP Series pumps Technical data 25 Construction 25 Materials 25 Mechanical shaft seal 26 Connections 26 Features and benefits 26 TPE Series 1 pumps Technical data 27 Construction 27 Applications 27 TPE(D) pumps with extended performance range 28 Operating modes of twin-head pumps 28 Control options 28 TPE Series 2 pumps Technical data 29 Construction 29 Applications 29 TPE(D) pumps with extended performance range 3 Operating modes of twin-head pumps 3 Control options 3 Communication Communication with TPE, TPED pumps 31 Speed regulation of TPE pumps Affinity equations 32 TP, TPE pumps in parallel Control of TP, TPE pumps connected in parallel 33 Alternation/standby function of TPED pumps 33 TP, TPE pumps connected to Control MPC 33 TPE Series 2 pumps connected to Control MPC Series 2 3 Grundfos CUE TP pumps connected to Grundfos CUE, external frequency converters 35 Functions 35 External communication 35 Motor data Motors 36 Motor protection 37 Electrical data, mains-operated motors 38 Electrical data, speed-controlled motors 2

Contents Installation Mechanical installation 1 Electrical installation 6 Flanges for TP pumps Flange dimensions 8 Curve charts How to read the curve charts 9 Curve conditions Technical data/performance curves TP, TPD, TPE, TPED, 2-pole, PN 6, 1, 16 52 TP, TPD, TPE, TPED, -pole, PN 6, 1, 16 7 TP, TPD, TPE, TPED, 6-pole, PN 16 1 TP, 2-pole, PN 25 1 TP, -pole, PN 25 16 Weights and shipping volume TP, TPD, TPE, TPED, 2-pole, PN 6, 1, 16 12 TP, TPD, TPE, TPED, -pole, PN 6, 1, 16 121 TP, TPD, 6-pole, PN 6, 1, 16 123 TP, 2-pole, PN 25 123 TP, -pole, PN 25 123 Accessories Unions and valves 125 Counter flanges 126 Base plates 129 Blanking flanges 131 Insulating kits 135 Sensors 136 Potentiometer 137 R1 137 CIU communication interface units 137 CIM communication interface modules 138 EMC filter 138 Minimum inlet pressure - NPSH TP, TPD, 2-pole, PN 6, 1, 16 1 TP, TPD, -pole, PN 6, 1, 16 11 TP, TPD, 6-pole, PN 16 11 TP Series, 2-pole, PN 25 11 TP Series, -pole, PN 25 12 Further product documentation WebCAPS 13 WinCAPS 1 3

Pump data TP, TPD, TPE, TPED Introduction TP pumps are designed for applications such as district heating systems heating systems air-conditioning systems district cooling systems water supply industrial processes industrial cooling. The pumps are available with either mains-operated motors (TP and TPD) or electronically speed-controlled motors (TPE and TPED). The pumps are all single-stage, in-line centrifugal pumps with mechanical shaft seal. The pumps are of the close-coupled type, i.e. pump and motor are separate units. Consequently, the pumps are less sensitive to impurities in the pumped liquid than similar pumps of the canned rotor type. TP, mains-operated pumps The TP range is divided into the following four groups based on their construction: TP Series 1, 2, 3 and. TP Series 1 with union or flange connection Rp 1 (DN 25) to Rp 1 1/ (DN 32) and motor sizes from.12 to.25 kw. For further information, see page 21. TP Series 2 with flange connection DN 32 to DN 1 and motor sizes from.12 to 2.2 kw. For further information, see page 21. TP Series 3 with flange connection DN 32 to DN 2 and motor sizes from.25 to 132 kw. For further information, see page 23. TP Series with flange connection Grundfos offers two TP Series versions: 1 bar version with DN 2 flange and motor sizes from 5 to 75 kw. 25 bar version with DN 1 to DN and motor sizes from 5.5 to 63 kw. For further information, see page 25. TPE, speed-controlled pumps Based on the construction and choice of material of TP pumps, Grundfos offers the following two series of speed-controlled TPE pumps: TPE Series 1 pumps (without factory-fitted differential-pressure sensor) TPE Series 2 pumps (with factory-fitted differential-pressure sensor) TPE Series 1 pumps The difference between the TP and the TPE Series 1 pump range is the motor. The motors of TPE Series 1 pumps have built-in frequency converter. Via an external signal (from a sensor or a controller), TPE Series 1 pumps allow for any configuration and control method required: Constant pressure, temperature or flow. For further information, see page 27. TPE Series 2 pumps The main differences between the TP and the TPE Series 2 pumps are the motor and the factory-fitted differential-pressure sensor. TPE Series 2 pumps are factory-set to proportionalpressure control. The motors of TPE Series 2 pumps have built-in frequency converter for continuous adjustment of the pressure to the flow rate. The TPE Series 2 range is recognized as a preset solution for quick and safe installation. For further information, see page 29. Why select a TPE pump? A TPE pump with electronic speed control offers these obvious benefits: energy savings increased comfort control and monitoring of pump performance communication with the pump. ATEX-approved TP pumps On request, Grundfos offers TP and TPD pumps with ATEX-approval. All ATEX-approved TP pumps are in accordance with Council directive 9/9/EC (Group II, category 3). If an ATEX-approved dry-running protection is installed, the pump can be upgraded to category 2G. High-efficiency motors TP pumps are fitted with high-efficiency motors. TP pumps are primarily fitted with motors that meet the legislative requirements of the EuP IE3 grade. For further information, see section Motors on pages 36 to. IE3

Pump data TP, TPD, TPE, TPED Type key Example TP E D 65-12 /2 -S -A -F -A -BUBE Pump range Electronically speed-controlled pump (Series 1, 2) Twin-head pump Nominal diameter of suction and discharge ports (DN) Maximum head [dm] Pole number S = TPE Series 2 (with factory-fitted differential pressure sensor) Code for pump version: A = Basic version I = PN 6 flange X = Special version Code for pipework connection: F = DIN flange O =Union Code for materials: A = Basic version Z = Bronze pump housing and pump head B = Bronze impeller Code for shaft seal (incl. other plastic and rubber pump parts, except the neck ring) Codes for shaft seal Example B U B E Grundfos type designation A = O-ring seal with fixed seal driver B = Rubber bellows seal D = O-ring seal, balanced G = Bellows seal with reduced seal faces R = O-ring seal with reduced seal faces Material of rotating face A = Carbon, antimony-impregnated B = Carbon, resin-impregnated Q = Silicon carbide U = Tungsten carbide Material of stationary seat B = Carbon, resin-impregnated Q = Silicon carbide U = Tungsten carbide Material of secondary seal E = EPDM P = NBR rubber V = FKM 5

Performance range TP, TPD, TPE, TPED 2-pole, PN 6, 1, 16 Performance range, 2-pole, PN 6, 1, 16 (See page 52 for performance curves) p [kpa] H 8 7 6 8 6 3 3 2 2 15 1 9 8 7 6 1 8 6 5 3 3 2 2 TM2 75 1 TP(D), TPE(D) PN 6/1/16, 2-pole, Hz -9 65-72 65-93 -83-71 8-7 65-66 65-5 65-1 1-39 65-6 8-8-2 8-33 -3 65-3 -36 32-58 32-6 32-38 -27-29 32-32 1-36 65-26 1-31 -2 65-23 65-19 -19-16 -18-57 - -58 1-8 8-57 8-52 -7-36 -3 8-2 32-2 1-2 -2 8-21 1-2 -23 32-23 32-2 32-18 32-1 8-18 8-1 65-18 1-2 1-16 -19-18 -9-12 -12 25-9 R 32-12 32-9 R 65-12 8-12 1-12 25- R 32-6 - 32- R -6 65-6 -6 1 2 3 5 6 8 1 15 2 3 6 8 1 1 2 3 Q [m³/h] 1 2 3 5 6 7 8 9 1 2 3 Q [l/s] Note: All QH curves apply to single-head pumps. For further information about curve conditions, see page. The hatched area shows the performance range of TPE pumps. 6

Performance range TP, TPD, TPE, TPED -pole, PN 6, 1, 16 Performance range, -pole, PN 6, 1, 16 (See page 7 for performance curves) p [kpa] H 6 3 3 2 2 15 1 9 8 7 6 1 8 6 5 3 3 2 2 1 1 TM2 7551 1 TP(D), TPE(D) PN 6/1/16, -pole, Hz 125-2 1-1 125-32 125-36 2-66 2-59 2-53 2-7 1-39 1-37 1-3 1-28 1-33 2-22 1-2 1-17 8-3 125-2 1-2 8-27 65-2 65-17 8-17 8-2 1-26 2-18 2-39 2-31 2-28 2-1 2-2-36 2-33 2-32 2-27 1-2 1-22 2-2 125-21 1-2 125-16 65-1 1-16 8-1 65-13 1-13 -16-16 32-12 -23-19 -13 125-13 -13 1-13 8-11 65-11 125-11 1-11 65-9 -11 32-1 32-8 -1 8-9 8-7 1-9 1-7 -9-9 -6-6 65-6 8-6 32-6 1-6 1-3 32-32-3-3 -3 65-3 8-3 1 2 3 5 6 8 1 15 2 3 6 8 1 1 2 3 6 1 Q [m³/h] 1 2 3 5 6 7 8 91 2 3 6 8 1 Q [l/s] Note: All QH curves apply to single-head pumps. For further information about curve conditions, see page. The hatched area shows the performance range of TPE pumps. 7

Performance range TP, TPD 6-pole, PN 16 Performance range, 6-pole, PN 16 (See page 1 for performance curves) p [kpa] H 2 2 15 12 1 9 8 8 7 6 6 5 3 3 TM2 8768 9 TP(D) PN 16, 6-pole, Hz 125-17/6 125-1/6 125-11/6 125-9/6 1-11/6 1-9/6 125-7/6 125-6/6 1-7/6 1-6/6 2 3 6 8 1 1 2 2 Q [m³/h] 6 7 8 9 1 2 3 Q [l/s] Note: All QH curves apply to single-head pumps. For further information about curve conditions, see page. 8

Performance range TP 2-pole, PN 25 Performance range, 2-pole, PN 25 (See page 1 for performance curves) p [kpa] H 2 2 1 1 9 1 9 8 8 7 7 6 6 3 3 TM2 6868 1 TP PN 25, 2-pole, Hz 1-168 1-153 1-1 1-118 1-1 1-96 1-82 1-7 1-62 2 3 6 7 8 1 1 2 3 Q [m³/h] 6 7 8 9 1 2 3 6 7 8 9 Q [l/s] 9

Performance range TP -pole, PN 25 Performance range, -pole, PN 25 (See page 16 for performance curves) p [kpa] H 7 7 6 6 3 3 2 2 15 1 1 TM2 6869 1 TP PN 25, -pole, Hz -76 3-7 -72 1-6 2-62 3-67 2-66 -67 2-56 1-53 3-59 2-6 -5 2-5 2-51 -51 2-9 1-3 2-125-3 1-2 1-38 1-3 -7 2-37 2-38 1-32 2-2 125-37 125-28 125-31 1-32 1-27 125-2 2-27 2-32 1-27 2-28 1-22 125-2 1-26 1-19 1-2 2-26 125-1 2 3 6 8 1 1 2 3 6 8 1 1 2 3 Q [m³/h] 6 7 8 9 1 2 3 6 7 891 2 3 6789 Q [l/s] 1

Product range TP, TPD, TPE, TPED Product range, 2-pole, PN 6, 1, 16 Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 Cast iron EN-GJL-2 Nodular cast iron EN-GJS--18 Bronze 1) TP 25-/2 R.12.12.37 TP 25-9/2 R.25.25.37 TP 32- /2 R.12.12.37 TP 32-9/2 R.25.25.37 TP, TPD 32-6/2.25.25.37 TP, TPD 32-12/2.37.37.37 TP, TPD 32-1/2.37.37.37 TP, TPD 32-18/2.55.55.55 TP, TPD 32-23/2.75.75.75.75 TP, TPD 32-2/2 1.1 1.1 1.1 1.1 TP, TPD 32-2/2 1.5 1.5 1.5 TP, TPD 32-32/2 2.2 2.2 2.2 TP, TPD 32-38/2 3. 3. 3. TP, TPD 32-6/2... TP, TPD 32-58/2 5.5 5.5 5.5 TP -/2.12.12.37 TP, TPD -6/2.25.25.37 TP -9/2.25.25.37 TP, TPD -12/2.37.37.37 TP -18/2.55.55.55 TP, TPD -19/2.75.75.75.75 TP, TPD -23/2 1.1 1.1 1.1 1.1 TP, TPD -27/2 1.5 1.5 1.5 TP, TPD -2/2 2.2 2.2 2.2 TP, TPD -3/2 3. 3. 3. TP, TPD -36/2... TP, TPD -7/2 5.5 5.5 5.5 TP, TPD -58/2 7.5 7.5 7.5 TP, TPD -6/2.37.37.37 TP, TPD -12/2.75.75.75.75 TP, TPD -18/2.75.75.75.75 TP, TPD -16/2 1.1 1.1 1.1 1.1 TP, TPD -19/2 1.5 1.5 1.5 TP, TPD -2/2 2.2 2.2 2.2 TP, TPD -29/2 3. 3. 3. TP, TPD -36/2... TP, TPD -3/2 5.5 5.5 5.5 TP, TPD -/2 7.5 7.5 7.5 TP, TPD -57/2 11. 11. 11. TP, TPD -71/2 15. 15. 15. TP, TPD -83/2 18.5 18.5 18.5 TP, TPD -9/2 22. 22. 22. TP, TPD 65-6/2.55.55.55 TP, TPD 65-12/2 1.1 1.1 1.1 1.1 TP, TPD 65-18/2 1.5 1.5 1.5 TP, TPD 65-19/2 2.2 2.2 2.2 TP, TPD 65-23/2 3. 3. 3. TP, TPD 65-26/2... TP, TPD 65-3/2 5.5 5.5 5.5 Stainless steel Cast iron Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV 2) P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 11

Product range TP, TPD, TPE, TPED Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type TP, TPD 65-1/2 7.5 7.5 7.5 TP, TPD 65-6/2 11. 11. 11. TP, TPD 65-5/2 15. 15. 15. TP, TPD 65-66/2 18.5 18.5 18.5 TP, TPD 65-72/2 22. 22. 22. TP, TPD 65-93/2 3. 3. TP, TPD 8-12/2 1.5 1.5 1.5 TP, TPD 8-1/2 2.2 2.2 2.2 TP, TPD 8-18/2 3. 3. 3. TP, TPD 8-21/2... TP, TPD 8-2/2 5.5 5.5 5.5 TP, TPD 8-2/2 7.5 7.5 7.5 TP, TPD 8-33/2 11. 11. 11. TP, TPD 8-/2 15. 15. 15. TP, TPD 8-52/2 18.5 18.5 18.5 TP, TPD 8-57/2 22. 22. 22. TP, TPD 8-7/2 3. 3. TP, TPD 1-12/2 2.2 2.2 2.2 TP, TPD 1-16/2... TP, TPD 1-2/2 5.5 5.5 5.5 TP, TPD 1-2/2 7.5 7.5 7.5 TP, TPD 1-2/2 11. 11. 11. TP, TPD 1-31/2 15. 15. 15. TP, TPD 1-36/2 18.5 18.5 18.5 TP, TPD 1-39/2 22. 22. 22. TP, TPD 1-8/2 3. 3. Standard. TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 1) Bronze versions are only available as single-head pumps. Cast iron EN-GJL-2 Nodular cast iron EN-GJS--18 Bronze 1) 2) 2-pole motors above 5.5 kw can be operated at 3 x 66-69 YV. Smaller motor sizes cannot. Stainless steel Cast iron Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV 2) P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 12

Product range TP, TPD, TPE, TPED Product range, -pole, PN 6, 1, 16 Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 Cast iron EN-GJL-2 Nodular cast iron EN-GJS--18 Bronze 1) TP, TPD 32-3/.12.12.37 TP, TPD 32-/.25.25.37 TP, TPD 32-6/.25.25.37 TP, TPD 32-8/.25.25.37 TP, TPD 32-1/.37.37.37 TP, TPD 32-12/.55.55.55 TP, TPD -3/.12.12.37 TP -6/.25.25.37 TP, TPD -9/.25.25.37 TP, TPD -1/.55.55.55.55 TP, TPD -13/.75.75.75.75 TP, TPD -16/ 1.1 1.1 1.1 TP, TPD -3/.25.25.37 TP, TPD -6/.37.37.37 TP, TPD -9/.55.55.55.55 TP, TPD -11/.75.75.75.75 TP, TPD -13/ 1.1 1.1 1.1 TP, TPD -16/ 1.5 1.5 1.5 TP, TPD -19/ 2.2 2.2 2.2 TP, TPD -23/ 3. 3. 3. TP, TPD 65-3/.25.25.37 TP, TPD 65-6/.55.55.55.55 TP, TPD 65-9/.75.75.75.75 TP, TPD 65-11/ 1.1 1.1 1.1 TP, TPD 65-13/ 1.5 1.5 1.5 TP, TPD 65-1/ 2.2 2.2 2.2 TP, TPD 65-17/ 3. 3. 3. TP, TPD 65-2/... TP, TPD 8-3/.37.37.37 TP, TPD 8-6/.75.75.75.75 TP, TPD 8-7/ 1.1 1.1 1.1 TP, TPD 8-9/ 1.5 1.5 1.5 TP, TPD 8-11/ 2.2 2.2 2.2 TP, TPD 8-1/ 3. 3. 3. TP, TPD 8-17/... TP, TPD 8-2/ 5.5 5.5 5.5 TP, TPD 8-27/ 7.5 7.5 7.5 TP, TPD 8-3/ 11. 11. 11. TP, TPD 1-3/.55.55.55.55 TP, TPD 1-6/ 1.1 1.1 1.1 TP, TPD 1-7/ 1.5 1.5 1.5 TP, TPD 1-9/ 2.2 2.2 2.2 TP, TPD 1-11/ 3. 3. 3. TP, TPD 1-13/... TP, TPD 1-17/ 5.5 5.5 5.5 TP, TPD 1-2/ 7.5 7.5 7.5 TP, TPD 1-2/ 11. 11. 11. TP, TPD 1-33/ 15. 15. 15. TP, TPD 1-37/ 18.5 18.5 18.5 Stainless steel Cast iron Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV 2) P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 13

Product range TP, TPD, TPE, TPED Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type TP, TPD 1-1/ 22. 22. TP, TPD 125-11/... TP, TPD 125-13/ 5.5 5.5 5.5 TP, TPD 125-16/ 7.5 7.5 7.5 TP, TPD 125-21/ 11. 11. 11. TP, TPD 125-2/ 15. 15. 15. TP, TPD 125-32/ 18.5 18.5 18.5 TP, TPD 125-36/ 22. 22. TP, TPD 125-2/ 3. 3. TP, TPD 1-13/ 7.5 7.5 7.5 TP, TPD 1-16/ 11. 11. 11. TP, TPD 1-2/ 15. 15. 15. TP, TPD 1-22/ 18.5 18.5 18.5 TP, TPD 1-2/ 22. 22. TP 1-26/ 18.5 18.5 18.5 TP 1-28/ 22. 22. TP 1-3/ 3. 3. TP 1-39/ 37. TP 2-18/ 22. 22. TP 2-22/ 3. 3. TP 2-2/ 37. TP 2-27/ 5. TP 2-32/ 55. TP 2-33/ 37. TP 2-36/ 5. TP 2-/ 55. TP 2-1/ 75. TP 2-7/ 75. TP 2-53/ 9 TP 2-59/ 11 TP 2-66/ 132 TP 2-28/ 5. TP 2-31/ 55. TP 2-39/ 75. Standard. TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 1) Bronze versions are only available as single-head pumps. Cast iron EN-GJL-2 2) -pole motors above kw can be operated at 3 x 66-69 YV. Smaller motor sizes cannot. Nodular cast iron EN-GJS--18 Bronze 1) Stainless steel Cast iron Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV 2) P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 1

Product range TP, TPD, TPE, TPED Product range, 6-pole, PN 16 Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type Standard. TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 1) Bronze versions are only available as single-head pumps. Product range, 2-pole, PN 25 Cast iron EN-GJL-2 Nodular cast iron EN-GJS--18 Bronze 1) Stainless steel Cast iron TP, TPD 125-6/6 1.5 TP, TPD 125-7/6 2.2 2.2 TP, TPD 125-9/6 3. 3. TP, TPD 125-11/6.. TP, TPD 125-1/6 5.5 5.5 TP, TPD 125-17/6 7.5 7.5 TP, TPD 1-6/6 2.2 2.2 TP, TPD 1-7/6 3. 3. TP, TPD 1-9/6.. TP, TPD 1-11/6 5.5 5.5 Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 3 x 38-15 V P 2 Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type Standard. TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 Cast iron EN-GJL-2 Nodular cast iron EN-GJS--18 Bronze Stainless steel Cast iron TP 1-62/2 37. TP 1-7/2 5. TP 1-82/2 55. TP 1-96/2 75. TP 1-1/2 75. TP 1-118/2 9. TP 1-1/2 11. TP 1-153/2 132. TP 1-168/2 16. Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 3 x 38-15 V P 2 15

Product range TP, TPD, TPE, TPED Product range, -pole, PN 25 Design Shaft seal Pressure stage Materials Mains-operated motor Electronically speed-controlled motor Pump housing Impeller Voltage [V] Voltage [V] Pump type Standard. TPE Series 1 TPE Series 2 TP Series 1 TP Series 2 TP Series 3 TP Series BUBE AUUE RUUE BAQE BQQE GQQE DBUE PN 6 PN 1 PN 16 PN 25 Cast iron EN-GJL-2 Nodular cast iron EN-GJS--18 Bronze Stainless steel Cast iron TP 1-19/ 5.5 TP 1-22/ 7.5 TP 1-26/ 11. TP 1-27/ 11. TP 1-32/ 15. TP 1-38/ 18.5 TP 1-2/ 22. TP 125-1/ 7.5 TP 125-2/ 11. TP 125-2/ 15. TP 125-28/ 15. TP 125-31/ 18.5 TP 125-37/ 22. TP 125-3/ 3. TP 1-2/ 18.5 TP 1-27/ 22. TP 1-32/ 3. TP 1-3/ 37. TP 1-3/ 5. TP 1-53/ 55. TP 1-6/ 75. TP 2-26/ 3. TP 2-28/ 37. TP 2-38/ 5. TP 2-2/ 55. TP 2-/ 55. TP 2-51/ 75. TP 2-56/ 9. TP 2-62/ 11. TP 2-27/ 5. TP 2-32/ 55. TP 2-37/ 75. TP 2-9/ 9. TP 2-5/ 11. TP 2-6/ 132. TP 2-66/ 16. TP 3-59/ 2. TP 3-67/ 2. TP 3-7/ 315. TP -7/ 315. TP -51/ 355. TP -5/. TP -67/. TP -72/ 56. TP -76/ 63. Nodular cast iron EN-GJS--15 Bronze 1 x 22-23 ΔV/ 2 YV P 2 3 x 22-2 ΔV/ 38-15 YV P 2 3 x 38-15 ΔV/ 66-69 YV P 2 1 x 22-2 V P 2 3 x 38-8 V P 2 16

Operating conditions TP, TPD, TPE, TPED System and test pressures Pressure System pressure Test pressure [bar] [MPa] [bar] [MPa] PN 6 6.6 1 1. PN 1 1 1. 16 1.6 PN 16 16 1.6 2 2. PN 25 25 2.5 38 3.8 Sound pressure level Single-phase: Three-phase: Max. 7 db(a). See table below. Maximum sound pressure level [db(a)] - ISO 373 Motor Three-phase motors 2-pole -pole 6-pole.12 - - -.18 - - -.25 56 1 -.37 56 5 -.55 57 2 -.75 53 59.5-1.1 53 9.5-1.5 58 7 2.2 6 51 52 3. 59.5 53 63. 63 5 63 5.5 62 63 7.5 6 51 66 11. 6 53-15. 6 5-18.5 6.5 6-22. 65.5 6-3. 7 62-37. 71 66-5. 67 66-55. 72 67-75. 7 7-9. 73 7-11. 76 7-132. 76 7-16. 76 7-2. - 7-2. - 73-315. - 73-355. - 75 -. - 75 -. - 75-56. - 78-63. - 78 - The values apply only to MG and Siemens motors. The values have a tolerance of 3 db according to EN ISO 871; the tolerance is not added to the values in the table. Ambient temperature MG IE2 and IE3 motors:.75-22 kw motors, 2-pole -3 to +6 C.75-15 kw motors, -pole Siemens IE2 and IE3 motors: 3-9 kw motors, 2-pole -3 to +55 C 18.5-9 kw motors, -pole MGE and other motor sizes -3 to + C Storage Down to -3 C If the ambient temperature exceeds above maximum values or if the motor is located more than 1 metres above sea level, the motor output (P 2 ) must be reduced due to the low density and consequent low cooling effect of the air. In such cases, it may be necessary to use an oversize motor with a higher rated output. Key [%] 1 1 2 9 8 3 7 6 2 25 3 35 5 55 6 65 7 75 8 t [ C] 1 22 3 7 m Fig. 1 Relationship between motor output (P 2 ) and altitude Pos. 1 Description Siemens IE2 and IE3 motors: 3-9 kw motors, 2-pole 18.5-9 kw motors, -pole MG IE2 and IE3 motors: 2.75-22 kw motors, 2-pole.75-15 kw motors, -pole 3 MGE and other motor sizes TM3 279 5 The audible noise from TP pumps is primarily noise from the motor fan. The selection of TPE pumps will reduce the noise at partial load, as the motor, and consequently, the motor fan runs at a lower speed. Possible flow noise from control valves is also reduced at partial load in the case of the TPE pump. 17

Pumped liquids TP, TPD, TPE, TPED Pumped liquids Thin, clean, non-aggressive and non-explosive liquids, not containing solid particles or fibres that may mechanically or chemically attack the pump. See "List of pumped liquids" on page 19. Examples of liquids Central heating system water (the water should meet the requirements of accepted standards on water quality in heating systems) cooling liquids domestic hot water industrial liquids softened water. If glycol or another antifreeze agent is added to the pumped liquid, the pump must have a shaft seal of the type RUUE or GQQE. The pumping of liquids with densities or kinematic viscosities higher than those of water can have these consequences: a considerable pressure drop a drop in the hydraulic performance a rise in the power consumption. In these situations, equip the pump with an oversize motor. If in doubt, contact Grundfos. If the water contains mineral oils or chemicals, or if other liquids than water are pumped, the O-rings should be chosen accordingly. Liquid temperature Liquid temperature: -25 C to +1 C. Please note that shaft seals operating close to their maximum temperature will require regular maintenance, i.e. replacement. Pump type Shaft seal Temperature TP Series 1 TP Series 2 TP Series 3 TP Series, 1 bar version TP Series, 25 bar version BUBE C to +11 C BQQE C to +9 C GQQE -25 C to +9 C BUBE C to +1 C AUUE C to +9 C RUUE -25 C to +9 C BAQE C to +12 C (1 C) 1) BQQE C to +9 C GQQE -25 C to +9 C (6 C) 2) BAQE C to +12 C BQQE C to +9 C GQQE -25 C to +9 C DBUE C to +1 C 3) 1) TP Series 3 pumps are designed for a maximum operating temperature of 1 C. For operation above 12 C, an alternative shaft seal is to be selected. Contact Grundfos. 2) The below listed TP Series 3 pumps with GQQE shaft seals are designed for a maximum operating temperature of 6 C. TP 1-26/ TP 2-18/ TP 1-28/ TP 2-22/ TP 1-3/ TP 2-2/ TP 1-39/ TP 2-27/ TP 2-32/ TP 2-33/ TP 2-36/ TP 2-/ TP 2-1/ TP 2-7/ TP 2-53/ TP 2-59/ TP 2-66/ 3) At +12 to +1 C, the maximum operating pressure 23 bar. Depending on the type of cast iron used and the pump application, the maximum liquid temperature may be limited by local regulations and laws. 18

Pumped liquids TP, TPD, TPE, TPED List of pumped liquids Grundfos TP and TPD pumps are designed for circulation systems with constant flow; TPE and TPED pumps for systems with variable flow. Thanks to their design, the pumps can be used in a wider liquid temperature range than pumps of the canned rotor type. A number of typical liquids are listed below. Other pump versions may be used, but we consider the ones stated in the list to be the best choices. The list is intended as a general guide only, and it cannot replace actual testing of the pumped liquids and pump materials under specific working conditions. If in doubt, contact Grundfos. Use the list with some caution, as factors such as concentration of the pumped liquid, liquid temperature or pressure may affect the chemical resistance of a specific pump version. Legend A B C D E F G H May contain additives or impurities that may cause shaft seal problems. The density and/or viscosity differ from those of water. Consider this when calculating motor and pump performance. The liquid must be oxygen-free (anaerobic). Risk of crystallisation/precipitation in the shaft seal. Insoluble in water. The shaft seal rubber parts must be replaced with FKM rubber. Bronze housing/impeller required. Risk of formation of ice on the standby pump. (The risk only applies to TP, TPE Series 2 pumps.) Pumped liquids Water Groundwater Notes Additional information Shaft seal TP Series 1 TP Series 2 TP Series 3 < +9 C BQQE AUUE BQQE > +9 C BUBE BUBE BAQE 1) BBQE 2) TP Series PN 1 BAQE TP Series PN 25 < +12 C BUBE 3) BUBE BAQE BAQE DBUE Boiler-feed water < +1 C BUBE BQBE/DAQF 2) DBUE < +1 C DBUE District heating water < +12 C BUBE BUBE BAQE BAQE DBUE Condensate Softened water Brackish water Coolants Ethylene glycol B, D, H < + C, % Glycerine (glycerol) B, D, H < + C, % Potassium acetate B, D, C, H < + C, % Potassium formate B, D, C, H < + C, % Propylene glycol C G B, D, H Brine-sodium chloride B, D, C, H < +5 C, 3 % Synthetic oils Silicone oil B, E < +9 C BQQE AUUE BQQE > +9 C BUBE BUBE BAQE < +9 C BQQE AUUE BQQE > +9 C BUBE BUBE BAQE ph > 6.5, + C, 1 ppm Cl - BUBE BQQE BQQE GQQE BQQE GQQE BQQE GQQE BQQE GQQE BQQE GQQE BQQE GQQE BUBE BQQE BUBE AUUE AUUE RUUE AUUE RUUE AUUE RUUE AUUE RUUE AUUE RUUE AUUE RUUE BUBE AUUE BAQE BAQE DBUE DBUE DBUE BQQE BQQE DBUE BQQE GQQE BQQE GQQE BQQE GQQE BQQE GQQE BQQE GQQE BQQE GQQE BAQE BQQE GQQE DQQE 2) GQQE DQQE 2) GQQE DQQE 2) GQQE DQQE 2) GQQE DQQE 2) GQQE DQQE 2) BAQE DBUE (To be continued) 19

Pumped liquids TP, TPD, TPE, TPED Pumped liquids Vegetable oils Corn oil 1) BAQE must not be used for potable water. For potable water, Grundfos recommends a BBQE shaft seal. 2) The shaft seal is not standard, but available on request. 3) Maximum +11 C. B, F, E Olive oil B, F, E < +8 C Peanut oil Rape seed oil Soya bean oil Cleaning agents B, F, E D, B, F, E B, F, E Soap (salts of fatty acids) A, E, (F) < +8 C Alkaline degreasing agent A, E, (F) < +8 C Oxidants Notes Additional information Hydrogen peroxide < + C, < 2 % BUBV 2) BQQV 2) BUBV 2) BQQV 2) BUBV 2) AUUV 2) BUBV 2) AUUV 2) BAQV 2) BQQV 2) BAQV 2) BQQV 2) BAQV 2) DBUV 2) BAQV 2) DBUV 2) BUBV 2) BUBV 2) BAQV 2) BQQV 2) AUUV 2) BQQV 2) BAQV 2) DBUV 2) BUBV 2) BQQV 2) BUBV 2) AUUV 2) BAQV 2) BQQV 2) BAQV 2) DBUV 2) BUBV 2) BUBV 2) BAQV 2) BQQV 2) AUUV 2) BQQV 2) BAQV 2) DBUV 2) BQQE (BQQV) 2) BQQE (BQQV) 2) BUBE BQQE AUUE (AUUV) 2) AUUE (AUUV) 2) BUBE AUUE Shaft seal TP Series 1 TP Series 2 TP Series 3 BQQE (BQQV) 2) GQQE DQQE 2) BQQE (BQQV) 2) TP Series PN 1 TP Series PN 25 GQQE DQQE 2) BQQE BQQV 2) DQQE 2) Salts Ammonium bicarbonate A < +2 C, < 15 % BQQE AUUE BQQE GQQE DQQE 2) Calcium acetate A, B < +2 C, < 3 % BQQE AUUE BQQE GQQE DQQE 2) Potassium bicarbonate A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Potassium carbonate A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Potassium permanganate A < +2 C, < 1 % BQQE AUUE BQQE GQQE DQQE 2) Potassium sulphate A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Sodium acetate A < +2 C, < 1 % BQQE AUUE BQQE GQQE DQQE 2) Sodium bicarbonate A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Sodium carbonate A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Sodium nitrate A < +2 C, < % BQQE AUUE BQQE GQQE DQQE 2) Sodium nitrite A < +2 C, < % BQQE AUUE BQQE GQQE DQQE 2) Sodium phosphate (di) A < +1 C, < 3 % BQQE AUUE BQQE GQQE DQQE 2) Sodium phosphate (tri) A < +9 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Sodium sulphate A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Sodium sulphite A < +2 C, < 1 % BQQE AUUE BQQE GQQE DQQE 2) Alkalis Ammonium hydroxide < +1 C, < 3 % BQQE AUUE BQQE GQQE DQQE 2) Calcium hydroxide A < +1 C, < 1 % BQQE AUUE BQQE GQQE DQQE 2) Potassium hydroxide A < +2 C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) Sodium hydroxide A < + C, < 2 % BQQE AUUE BQQE GQQE DQQE 2) 2

TP Series 1 and 2 pumps TP, TPD, TPE, TPED Materials TP Series 1 Fig. 2 TP Series 1 and TP Series 2 Technical data Flow rate: Up to 9 m 3 /h Head: Up to 27 m Liquid temperature (TP Series 1): -25 to +11 C Liquid temperature (TP Series 2): -25 to +1 C Maximum operating pressure: Up to 16 bar Direction of rotation: Counter-clockwise Construction Grundfos TP Series 1 and Series 2 pumps are single-stage, close-coupled pumps with in-line suction and discharge ports of identical diameter. The pumps are fitted with a fan-cooled asynchronous motor. Motor and pump shafts are connected via a rigid two-part coupling. TP Series 1 pumps with union connection are available as single-head (TP) pumps. TP Series 2 pumps are available as single-head (TP) and twin-head (TPD) pumps. TP Series 2 pumps have PN 6 or PN 1 flanges. The pumps are fitted with an unbalanced mechanical shaft seal. The pumps are of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The twin-head pumps are designed with two parallel power heads. A non-return flap valve in the common discharge port is opened by the flow of the pumped liquid and prevents backflow of liquid into the idle pump head. As radial and axial forces are absorbed by the fixed bearing in the motor drive-end, the pump requires no bearing. TP, TPD Series 1 and 2 pumps are fitted with highefficiency motors. Pumps with bronze pump housing (version B) are suitable for circulation of domestic hot water. Gr8262 - Gr8261 Fig. 3 Sectional drawing of TP Series 1 (with union connection) Material specification, Series 1 Pos. Component Material EN/DIN 1 Pump housing TP, TPE Series 2 Cast iron EN-GJL-2, bronze CuSn1 Fig. Sectional drawing of TP Series 2 (with flange connection) TM3 121 15 EN-JL 13 2.193 2 Impeller Stainless steel 1.31 3 Shaft Stainless steel 1.57 Coupling Cast iron EN-GJL-.7 5 Pump head Secondary seals Rotating seal face Stationary seat Cast iron EN-GJL-2, bronze EPDM Tungsten carbide Silicon carbide 5 3 2 Carbon (resin-impregnated) Silicon carbide 5 1 3 2 1.625 2.193 TM3 1211 15 21

TP Series 1 and 2 pumps TP, TPD, TPE, TPED Material specification, Series 2 Pos. Component Material EN/DIN 1 Pump housing Mechanical shaft seal Three types of unbalanced mechanical shaft seal are available as standard: BUBE The BUBE shaft seal is a Grundfos rubber bellows seal with tungsten carbide/carbon seal faces and secondary seals of EPDM. RUUE/GQQE The RUUE shaft seal is a Grundfos O-ring seal with reduced tungsten carbide/tungsten carbide seal faces and secondary seals of EPDM. The GQQE shaft seal is a Grundfos rubber bellows seal with reduced silicon carbide/silicon carbide seal faces and secondary seals of EPDM. AUUE/BQQE The AUUE shaft seal is a Grundfos O-ring seal with fixed seal driver, tungsten carbide/tungsten carbide seal faces and secondary seals of EPDM. The BQQE shaft seal is a Grundfos rubber bellows seal with silicon carbide/silicon carbide seal faces and secondary seals of EPDM. Information on a selection of common pumped liquids with recommended shaft seals is shown on page 19. Shaft seal specification Cast iron EN-GJL-2, bronze CuSn1 EN-JL 1 2.193 2 Impeller Stainless steel 1.31 3 Shaft Stainless steel 1.35 Coupling Cast iron EN-GJL-.7 5 Pump head Secondary seals Rotating seal face Stationary seat Unbalanced shaft seal Shaft diameter Rubber bellows Seal faces Cast iron EN-GJL-2, bronze EPDM Tungsten carbide Carbon (resin-impregnated) Tungsten carbide TP Series 1 TP, TPD Series 2.625 2.193 Version KU according to EN 12756 Version NU according to EN 12756 12 and 16 mm EPDM Tungsten carbide/carbon Tungsten carbide/tungsten carbide Silicon carbide/silicon carbide Special shaft seals are available for partly conditioned water or other liquids containing abrasive or crystallising particles. See page 19. Connections TP Series 1 pumps with union connection have suction and discharge union threads to ISO 228-1. TP Series 2 pumps up to DN 65 are fitted with combination flanges PN 6/PN 1. DN 8 or DN 1 pumps have either PN 6 or PN 1 flanges. All flanges can be connected to flanges in accordance with EN 192-2 and ISO 75-2. Features and benefits TP Series 1 and Series 2 pumps have these features and benefits: Optimised hydraulics for high efficiency - Reduced power consumption. High-efficiency motors - TP pumps are fitted with high-efficiency motors. High-efficiency motors offer reduced energy consumption. TP pumps are primarily fitted with motors that meet the legislative requirements of the EuP IE3 grade. For further information, see section Motors on pages 36 to. Top-pull-out design - Easy dismantling in case of service. In-line design - Contrary to end-suction pumps, in-line pumps allow a straight pipework and thus often reduced installation costs. Pump housing and pump head are electrocoated to improve the corrosion resistance - Electrocoating includes: 1. Alkaline cleaning. 2. Pretreatment with zinc phosphate coating. 3. Cathodic electrocoating (epoxy).. Curing of paint film at 2-2 C. For low-temperature applications at a high humidity, Grundfos offers TP pumps with extra surface treatment to avoid corrosion. These pumps are available on request. Stainless-steel impeller and neck ring - Wear-free operation with high efficiency. TPE, TPED - pumps with built-in frequency converter - 2-pole and -pole TP pumps from.37 and upwards are available as TPE pumps with built-in frequency converter. See pages and 11-1. 22

TP Series 3 pumps TP, TPD, TPE, TPED TP Series 3 pumps with bronze impeller are suitable for pumping brine. Materials Fig. 5 TP Series 3 Gr8259 TM 9586 61 Technical data Flow rate: Up to 825 m 3 /h Head: Up to 93 m Liquid temperature: -25 to +1 C Maximum operating pressure: 16 bar Direction of rotation: Clockwise Construction Grundfos TP, TPD Series 3 pumps are single-stage, close-coupled pumps with in-line suction and discharge ports of identical diameter. The pumps are fitted with a fan-cooled asynchronous motor. Motor and pump shafts are connected via a rigid sleeve coupling. Most TP Series 3 pumps are available as singlehead (TP) and twin-head (TPD) pumps. TP Series 3 pumps have PN 16 flanges. The pumps are fitted with an unbalanced mechanical shaft seal. The pumps are of the top-pull-out design, i.e. the power head (motor, pump head and/or motor stool and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump housing is provided with replaceable wear rings to ensure high pump efficiency for life. The twin-head pumps are designed with two parallel power heads. A non-return flap valve in the common discharge port is opened by the flow of the pumped liquid and prevents backflow of liquid into the idle pump head. As radial and axial forces are absorbed by the fixed bearing in the motor drive-end, the pump requires no bearing. The impeller is hydraulically balanced to minimise axial forces. TP, TPD Series 3 pumps are fitted with highefficiency motors. Fig. 6 Sectional drawing of TP Series 3 Material specification Pos. Component Material EN/DIN 1 Pump housing Cast iron EN-GJL-2 EN-JL 1 2 Impeller 3 Stub shaft Two-part stub shaft Pump head/motor stool Secondary seals Mechanical shaft seal Three types of unbalanced mechanical shaft seal are available as standard: BAQE The BAQE shaft seal is a Grundfos rubber bellows seal with carbon/silicon carbide seal faces and secondary seals of EPDM. GQQE The GQQE shaft seal is a Grundfos rubber bellows seal with reduced silicon carbide/silicon carbide seal faces and secondary seals of EPDM. BQQE The BQQE shaft seal is a Grundfos rubber bellows seal with silicon carbide/silicon carbide seal faces and secondary seals of EPDM. Information on a selection of common pumped liquids with recommended shaft seals is shown on page 19. Shaft seal specification Cast iron EN-GJL-2, bronze CuSn5Zn5Pb Stainless steel Stainless steel/steel EN-JL 13 2.196.1 1.31 1.31/1.31 Cast iron EN-GJL-2 EN-JL 1 EPDM Metal-impregnated Rotating seal face carbon Silicon carbide Stationary seat Silicon carbide 5 Wear rings Bronze CuSn1 2.193 Unbalanced shaft seal Version NU according to EN 12756 Shaft diameter 28, 38, 8 and 55 mm Rubber bellows EPDM Seal faces Carbon/silicon carbide Silicon carbide/silicon carbide 23

TP Series 3 pumps TP, TPD, TPE, TPED Special shaft seals are available for partly conditioned water or other liquids containing abrasive or crystallising particles. See page 19. Connections TP Series 3 pumps have PN 16 flanges. All dimensions are according to ISO 75-2 or EN 192-2. Features and benefits TP Series 3 pumps have these features and benefits: Optimised hydraulics for high efficiency - Reduced power consumption. High-efficiency motors - TP pumps are fitted with high-efficiency motors. High-efficiency motors offer reduced energy consumption. TP pumps are primarily fitted with motors that meet the legislative requirements of the EuP IE3 grade. For further information, see section Motors on pages 36 to. Top-pull-out design - Easy dismantling in case of service. In-line design - Contrary to end-suction pumps, in-line pumps allow a straight pipework and thus often reduced installation costs. Motor-pump shaft with sleeve coupling - - Stable and quiet operation. Easy dismantling in case of service. Hydraulically and mechanically balanced impeller - The impeller is hydraulically and mechanically balanced to increase the life of motor bearings and shaft seal. Pump housing and pump head/motor stool are electrocoated to improve the corrosion resistance - Electrocoating includes: 1. Alkaline cleaning. 2. Pretreatment with zinc phosphate coating. 3. Cathodic electrocoating (epoxy).. Curing of paint film at 2-2 C. For low-temperature applications at a high humidity, Grundfos offers TP pumps with extra surface treatment to avoid corrosion. These pumps are available on request. TPE, TPED - pumps with built-in frequency converter - 2-pole TP pumps from.37 to 22 kw and -pole TP pumps from.37 to 18.5 kw are available as TPE pumps with built-in frequency converter. See pages and 11-1. 2

TP Series pumps TP, TPD, TPE, TPED TP Series pumps are fitted with high-efficiency motors. Materials Gr7539 TM 9587 61 Fig. 7 TP Series Technical data Flow rate: PN 1 version: PN 25 version: Head: PN 1 version: PN 25 version: Liquid temperature: PN 1 version: PN 25 version: Up to 9 m 3 /h Up to m 3 /h Up to 38 m Up to 17 m -25 to +12 C to +1 C * * From +12 to +1 C, max. 23 bar Maximum operating pressure: 1 bar version: 25 bar version: Direction of rotation: Clockwise 1 bar 25 bar Construction Grundfos TP Series pumps are single-stage, closecoupled pumps with in-line suction and discharge ports. The pumps are fitted with a fan-cooled asynchronous motor. Motor and pump shafts are connected via a rigid flange coupling. TP Series pumps are available as single-head (TP) pumps. All TP Series pumps have PN 1 or PN 25 flanges. The largest pumps have DN, PN discharge flanges and a maximum operating pressure of 25 bar. Fig. 8 Sectional drawing of TP Series Material specification TP Series, PN 1 Pos. Component Material EN/DIN 1 Pump housing Cast iron EN-GJL-2 EN-JL1 2 Impeller Ductile cast iron EN-GJS- EN-JL13 Bronze 2.196.1 3 Pump shaft Stainless steel 1.36 Coupling Cast iron EN-GJL-2 EN-JL1 5 Motor stool Cast iron EN-GJL-2 EN-JL1 Secondary seals EPDM rubber Metal-impregnated carbon Rotating seal face Silicon carbide Stationary seat Silicon carbide 6 Wear rings Bronze CuSn1 2.193 TP Series, PN 25 Pos. Component Material EN/DIN 1 Pump housing Ductile cast iron EN-GJS--18 (A-LT) EN-JS12 2 Impeller Ductile cast iron EN-GJS- EN-JS13 Bronze 2.196.1 3 Pump shaft Stainless steel 1.36 Coupling Cast iron EN-GJL-2 EN-JL1 5 Motor stool Cast iron EN-GJL-2 EN-JL1 Secondary seals EPDM rubber Rotating seal face Resin-impregnated carbon Stationary seat Tungsten carbide The pumps are fitted with an unbalanced mechanical shaft seal. The pumps are of the top-pull-out design, i.e. the power head (motor, motor stool and impeller) can be removed for maintenance or service while the pump housing remains in the pipework. The pump housing is provided with replaceable wear rings to ensure high pump efficiency for life. As radial and axial forces are absorbed by the fixed bearing in the motor drive-end, the pump requires no bearing. 25

TP Series pumps TP, TPD, TPE, TPED Mechanical shaft seal For 1 bar versions, the following three types of unbalanced mechanical shaft seal are available as standard: BAQE The BAQE shaft seal is a Grundfos rubber bellows seal with carbon/silicon carbide seal faces and secondary seals of EPDM. GQQE The GQQE shaft seal is a Grundfos rubber bellows seal with reduced silicon carbide/silicon carbide seal faces and secondary seals of EPDM. BQQE The BQQE shaft seal is a Grundfos rubber bellows seal with silicon carbide/silicon carbide seal faces and secondary seals of EPDM. For 25 bar versions, the following mechanical shaft seal is available as standard: DBUE The DBUE shaft seal is a Grundfos balanced O-ring seal with carbon/tungsten carbide seal faces and secondary seals of EPDM. Information on a selection of common pumped liquids with recommended shaft seals is shown on page 19. Special shaft seals are available for partly conditioned water or other liquids containing abrasive or crystallising particles. See page 19. Connections TP Series pumps are the only TP pumps with suction and discharge ports of different diameters. The suction port is one dimension larger than the discharge port in order to obtain a low inlet velocity. This reduces risk of cavitation and noise. From DN 1 to DN 3 TP Series pumps have flanges according to ISO 75-2 or EN 192-2. Features and benefits TP Series pumps have the following features and benefits: Optimised hydraulics for high efficiency - Reduced power consumption. High-efficiency motors - TP pumps are fitted with high-efficiency motors. High-efficiency motors offer reduced energy consumption. TP pumps are primarily fitted with motors that meet the legislative requirements of the EuP IE3 grade. For further information, see section Motors on pages 36 to. Top-pull-out design - Easy dismantling in case of service. In-line design - Contrary to end-suction pumps, in-line pumps allow a straight pipework and thus often reduced installation costs. Motor-pump shaft with flange coupling - - Stable and quiet operation. Easy dismantling in case of service. Supported flange connection - Pump housing flanges have integrated feet in order to stabilise the pump. Surface treatment TP Series pumps are given the following surface treatment: Pump type Electrocoating Spray painting TP Series (from DN 1 to DN 3) x x TP Series (DN ) 2x Electrocoating includes: 1. Alkaline cleaning. 2. Pretreatment with zinc phosphate coating. 3. Cathodic electrocoating (epoxy).. Curing of paint film at 2-2 C. For low-temperature applications at a high humidity, Grundfos offers TP pumps with extra surface treatment to avoid corrosion. These pumps are available on request. 26

TPE Series 1 pumps TP, TPD, TPE, TPED Fig. 9 TPE and TPED Series 1 TM3 37 9 Applications TPE Series 1 pumps have integrated speed control for automatic adaptation of performance to current conditions. The energy consumption is thus kept at a minimum. TPE Series 1 pumps can operate in any duty point within the range between 25 % and 1 % speed (11 to 22 kw TPE(D) pumps up to 11 % speed). H H 1 % Technical data Flow rate: Up to 3 m 3 /h Head: Up to 9 m Liquid temperature: -25 to +1 C Maximum operating pressure: 16 bar Motor sizes (single-phase):.37 to 1.1 kw Motor sizes (three-phase):.55 to 22 kw Construction TPE, TPED Series 1 pumps are based on TP, TPD Series 1, 2 and 3 pumps. The main difference between the TP and the TPE Series 1 pump range is the motor. The motor of TPE Series 1 pumps has a built-in frequency converter for continuous adjustment of the pressure to the flow rate. TPE Series 1 pumps are suitable for applications where the pressure, temperature, flow rate or another parameter is to be controlled on the basis of signals from a sensor at some point in the system. Note: TPE Series 1 pumps are not fitted with a sensor from factory. For further information on construction and materials of TPE Series 1 pumps, see pages 21 to 2. 25 % Q [m 3 h] Q [m³/h] Fig. 1 Duty range of TPE Series 1 pumps The 1 % curve corresponds to the curve of a pump with a mains-operated motor. Depending on the application, TPE Series 1 pumps offer energy savings, increased comfort or improved processing. The pumps can be fitted with sensor types meeting the requirements mentioned in the data booklet titled "Grundfos E-pumps". TM1 916 199 27

TPE Series 1 pumps TP, TPD, TPE, TPED The charts below show possible control modes of TPE Series 1 pumps in different applications. Control mode Constant curve Application Single-pipe heating systems. Systems with three-way valves. Heating and cooling surfaces. Chiller pumps. Constant differential pressure Systems with two-way valves. (Sensor is needed.) Temperature control Constant flow rate Single-pipe heating systems. Systems with three-way valves. Cooling towers. Chiller pumps. Domestic hot-water recirculation systems. (Sensor is needed.) Heating and cooling surfaces. Cooling towers. Flow filters. (Sensor is needed.) Proportional differential pressure (measured) System with two-way valves. (The differential pressure sensor is located in the system.) TPE(D) pumps with extended performance range Standard TPE(D) pumps, Hz, with motors from 11 to 22 kw are able to operate in a range above the 1 % curve. See fig. 11. The extended range is provided by means of optimised software which utilises the MGE motor in an optimum way. The result is that the TPE(D) pump is able to deliver higher head and flow with the same motor size. The curve sheets in the TP, TPD, TPE, TPED data booklet are only showing the nominal 1 % Q-H curve. WinCAPS and WebCAPS are showing the extended performance range of the 11 to 22 kw TPE(D) pumps. Operating modes of twin-head pumps The following operating modes are available for twinhead pumps: Alternating operation The two pumps run alternately for 2 operating hours. In case of fault in the operating pump, the other pump will start. Standby operation One pump is in constant operation. Every 2 operating hours the standby pump will start and run for a short period to prevent it from seizing up. In case of fault in the operating pump, the standby pump will start. The operating mode is selected by means of a selector switch in each terminal box. In case of sensor fault, the operating pump will switch to maximum operation. Control options Communication with TPE, TPED Series 1 pumps is possible via a central building management system, remote control (Grundfos R1) or control panel. The purpose of controlling a TPE, TPED Series 1 pump is to monitor and control the pressure, temperature, flow rate and liquid level of the system. For further information on control options of TPE pumps, see page 31. H (m) 11 % 6 1 % TPE -57/2-S 19 % 17 % 15 % 13 % 3 x V, Hz Q = 5.1 m 3 /h H = 5 m n = 1 % 11 % 1 % 3 2 1 5 1 15 2 25 3 35 5 55 6 Q(m3/h) TM 632 11 Fig. 11 11 to 22 kw TPE(D) pumps with extended performance range 28

TPE Series 2 pumps TP, TPD, TPE, TPED Applications TPE Series 2 pumps have integrated speed control for automatic adaptation of performance to current conditions. The energy consumption is kept thus at a minimum. TM3 38 9 TPE Series 2 pumps can operate in any duty point within the range between 25 % and 1 % speed (11 to 22 kw TPE(D) pumps up to 11 % speed). H Fig. 12 TPE Series 2 1 % Technical data Flow rate: Up to 3 m 3 /h Head: Up to 9 m Liquid temperature: -25 to +1 C Maximum operating pressure: 16 bar Motor sizes (single-phase):.37 to 1.1 kw Motor sizes (three-phase):.55 to 22 kw 25 % Q [m³/h] [m 3 h] TM1 916 199 Construction TPE, TPED Series 2 pumps are based on TP, TPD Series 2 and 3 pumps. The main differences between the TP and the TPE Series 2 pumps are the motor and the factory-fitted differential pressure sensor. The motor of TPE Series 2 pumps has built-in frequency converter for continuous adjustment of the pressure to the flow rate. The TPE Series 2 range is a preset solution for quick and safe installation. For further information on construction and materials of TPE Series 2 pumps, see pages 21 to 2. Fig. 13 Duty range of TPE Series 2 pumps The 1 % curve corresponds to the curve of a pump with a mains-operated motor. Depending on the application, TPE Series 2 pumps offer energy savings, increased comfort or improved processing. TPE Series 2 pumps are suitable for applications requiring pressure control. Proportional pressure TPE Series 2 pumps are factory-set to proportional pressure control. We recommend proportional pressure control in systems with relatively large pressure losses, as it is the most economical control mode. TPE Series 2 pumps set to proportional pressure control continuously adjust the pump head to the water requirement of the system. The setpoint is factory-set to % of the maximum pump head. The pumps can be retrofitted with sensor types meeting the requirements mentioned in the data booklet titled Grundfos E-pumps. 29

TPE Series 2 pumps TP, TPD, TPE, TPED The charts below show possible control modes of TPE Series 2 pumps in different applications. Control mode Proportional pressure Application Systems with two-way valves. - The head against a closed valve is % of the setpoint. Operating modes of twin-head pumps The following operating modes are available for twinhead pumps: Alternating operation The two pumps run alternately for 2 operating hours. In case of fault in the operating pump, the other pump will start. Constant pressure Systems with two-way valves. Standby operation One pump is in constant operation. Every 2 operating hours the standby pump will start and run for a short period to prevent it from seizing up. In case of fault in the operating pump, the standby pump will start. The operating mode is selected by means of a selector switch in each terminal box. Constant curve Single-pipe heating system. Systems with three-way valves. Heating and cooling surfaces. Chiller pumps. TPE(D) pumps with extended performance range Standard TPE(D) pumps, Hz, with motors from 11 to 22 kw are able to operate in a range above the 1 % curve. See fig. 1. In case of sensor fault, the operating pump will switch to maximum operation. Control options Communication with TPE, TPED Series 2 pumps is possible via a central building management system, remote control (Grundfos R1) or control panel. The purpose of controlling TPE, TPED Series 2 pumps is to monitor and control the pressure, temperature, flow rate and liquid level of the system. For further information on control options of TPE pumps, see page 31. H (m) 11 % 6 1 % TPE -57/2-S 19 % 17 % 15 % 13 % 3 x V, Hz Q = 5.1 m 3 /h H = 5 m n = 1 % 11 % 1 % 3 2 1 5 1 15 2 25 3 35 5 55 6 Q(m3/h) TM 632 11 Fig. 1 11 to 22 kw TPE(D) pumps with extended performance range The extended range is provided by means of optimised software which utilises the MGE motor in an optimum way. The result is that the TPE(D) pump is able to deliver higher head and flow with the same motor size. The curve sheets in the TP, TPD, TPE, TPED data booklet are only showing the nominal 1 % Q-H curve. WinCAPS and WebCAPS are showing the extended performance range of the 11 to 22 kw TPE(D) pumps. 3

Communication TP, TPD, TPE, TPED Communication with TPE, TPED pumps Communication with TPE, TPED pumps is possible via a central building management system, remote control (Grundfos R1) or control panel. Central building management system The operator can communicate with a TPE, TPED pump at a distance. Communication can take place via a central building management system allowing the operator to monitor and change control modes and setpoint settings. Remote control The Grundfos R1 remote control is available as an accessory. The operator can communicate with the TPE, TPED pump by pointing the IR-signal transmitter at the control panel of the terminal box. TM3 11 1 LON, Profibus, Modbus, Bnet network or GSM/GPRS network Fig. 16 R1 remote control The operator can monitor and change control modes and settings of the TPE, TPED pump via the R1 display. Control panel The operator can change the setpoint settings manually on the control panel of the TPE, TPED pump terminal box. CIU 1: LON CIU 1: Profibus DP CIU 2: Modbus RTU CIU 2: GSM/GPRS CIU 3: Bnet MS/TP TM 76 Fig. 17 Control panel of a TPE pump CIM 1: LON CIM 1: Profibus DP CIM 2: Modbus RTU CIM 2: GSM/GPRS CIM 3: Bnet MS/TP TPE pump TPE pump (11-22 kw) TM 22 29 Fig. 15 Structure of a central building management system 31

Speed regulation of TPE pumps TP, TPD, TPE, TPED Affinity equations Normally, TPE, TPED pumps are used in applications characterised by a variable flow. Consequently, it is not possible to select a pump that is constantly operating at its optimum efficiency. H H n Q n n ------- n = ------ Q x n x In order to achieve optimum operating economy, the duty point should be close to the optimum efficiency (eta) for most operating hours. H x n x n n H n n ------- n 2 = ------ H x n x Between the min. and max. performance curves, TPE, TPED pumps have an infinite number of performance curves each representing a specific speed. It may therefore not be possible to select a duty point close to the max. curve. Eta Q x Q n Q η ------ n 1 η x H n x n n Max. curve P n P Q x Q n n n Q P n n n 3 ------ = ------ P x n x Min. curve Q [m [m³/h] 3 h] Fig. 18 Min. and max. performance curves In situations where it is not possible to select a duty point close to the max. curve, use the affinity equations below. The head (H), the flow rate (Q) and the input power (P) are the appropriate variables you need for calculating the motor speed (n). Note: The approximated formulas apply on condition that the system characteristic remains unchanged for n n and n x, and that it is based on the formula H = k x Q 2 where k is a constant. The power equation implies that the pump efficiency is unchanged at the two speeds. In practice this is not quite correct. Finally, it is worth noting that the efficiency of the frequency converter and the motor must be taken into account if a precise calculation of the power saving resulting from a reduction of the pump speed is wanted. TM1 916 83 P x Fig. 19 Affinity equations Legend H n Rated head in metres H x Current head in metres Q n Rated flow rate in m 3 /h Q x Current flow rate in m 3 /h n n Rated motor speed in min -1 n x Current motor speed in min -1 η n Rated efficiency in % η x Current efficiency in % WinCAPS and WebCAPS WinCAPS and WebCAPS are selection programs offered by Grundfos. n x The two programs make it possible to calculate the specific duty point and energy consumption of a TPE pump. When you enter the dimensions of the pump, WinCAPS and WebCAPS can calculate the exact duty point and energy consumption. For further information, see page 13. Q TM 872 396 32

TP, TPE pumps in parallel TP, TPD, TPE, TPED Control of TP, TPE pumps connected in parallel In some applications parallel pump operation is required for one or more of the following reasons: One pump cannot achieve the required performance (flow rate). Standby capacity is required to ensure reliability of supply. Overall efficiency needs to be improved in case of big variations in the flow demand. The table below lists the different possibilities of controlling TP, TPE pumps connected in parallel. Parallel-operation control possibilities Built-in alternation/standby function TP, TPE TPE Series 2 1) 1) TP, TPE pumps connected to Control MPC TP, TPE pumps can be connected directly to Grundfos Control MPC. Control MPC incorporates a CU 351 controller that can control up to six pumps. By means of an external sensor Control MPC can ensure optimum adaptation of the performance to the demand by closed-loop control of these parameters: proportional differential pressure constant differential pressure differential pressure (remote) flow rate temperature. The CU 351 incorporates features such as those below: Start-up wizard Correct installation and commissioning is a prerequisite for attaining optimum performance of the system and trouble-free operation year in and year out. Control MPC Control MPC Series 2 During commissioning of the system, a start-up wizard is shown on the display of the CU 351. The wizard will guide the operator through the various steps via a series of dialogue boxes to ensure that all settings are done in the correct sequence. Application-optimised software The CU 351 incorporates application-optimised software which helps you set up your system to the application in question. Available. 1) Applies only to TPED pumps. Alternation/standby function of TPED pumps All TPED pumps have built-in alternation/standby function. The pumps are supplied with a special cable for the communication between the two power heads. The function is activated from factory and "alternating" mode is selected as default. See pages 28 and 3. Fig. 2 TPED Series 2 TM3 13 Furthermore, navigating through the menus of the controller is done in a user-friendly way. You do not need any training to be able to set and monitor the system. Ethernet connection The CU 351 incorporates an Ethernet connection which makes it possible to get full and unlimited access to the setting and monitoring of the system via a remote PC. Service port (GENI TTL) The service port of the CU 351 enables easy access to updating software and data logging in service situations. External communication Control MPC enables communication with other fieldbus protocols. In order to communicate with other fieldbus protocols, a GENIbus module and a gateway are required. Control MPC can communicate with LON, Profibus, Modbus, Bnet, GSM/GPRS or GRM via a Grundfos CIU. 33

TP, TPE pumps in parallel TP, TPD, TPE, TPED TPE Series 2 pumps connected to Control MPC Series 2 TPE Series 2 pumps are connected directly to Grundfos Control MPC Series 2 via GENIbus. Control MPC Series 2 incorporates a CU 351 controller that can control up to six pumps. All pumps must be of the same type and size. Control MPC Series 2 is used for controlling circulator pumps in heating and air-conditioning applications. Control MPC Series 2 ensures optimal adaptation of the performance to the demand by closed-loop control of these parameters: proportional differential pressure constant differential pressure. By means of an external sensor Control MPC Series 2 can also ensure optimum adaptation of the performance to the demand by closed-loop control of these parameters: differential pressure (remote) flow rate temperature. Note: For further information about Control MPC and Control MPC Series 2, see the data booklet titled "Control MPC". The data booklet is available in WebCAPS, on www.grundfos.com. For further information on WebCAPS, see page 13. 3

Grundfos CUE TP, TPD, TPE, TPED TP pumps connected to Grundfos CUE, external frequency converters Functions Intuitive start-up guide The start-up guide enables easy installation and commissioning as well as plug-and-pump convenience. Few settings need to be made by the installer as the rest is done automatically or preset from the factory. Smart user interface Fig. 21 Grundfos CUE Grundfos CUE is a complete range of wall-mounted frequency converters for pump control in a wide range of applications. Grundfos CUE provides a variety of benefits, such as these: Grundfos E-pump functionality and user interface application- and pump family-related functions increased comfort compared to fixed-speed pump solutions simple installation and commissioning compared to standard frequency converters speed control of pumps up to 2 kw. GrA Fig. 22 Grundfos CUE user interface Grundfos CUE features a unique user-friendly control panel with graphic display and easy-to-use buttons. Panel layout resembles the well-known Grundfos R1 remote control, which is used with Grundfos E-pumps. Controlling the value you choose Grundfos CUE has a built-in PI controller offering closed-loop control of a desired value, such as these: constant differential pressure proportional pressure constant temperature constant differential pressure constant flow rate. TM 3283 18 Wide product range The CUE product range is quite comprehensive, covering five different voltage ranges, enclosure classes I/21 (Nema 1) and IP5/55 (Nema 12), and a wide range of output powers. The table below provides a general overview. Input voltage [V] Output voltage [V] Motor 1 x 2-2 3 x 2-2 1.1-7.5 3 x 2-2 3 x 2-2.75-5 3 x 38-3 x 38-.55-2 3 x 525-6 3 x 525-6.75-7.5 3 x 525-69 3 x 525-69 11-2 External communication Grundfos CUE can communicate with LON, Profibus, Modbus, Bnet or GSM/GPRS via a Grundfos CIU. 35

Motor data TP, TPD, TPE, TPED Motors Motors fitted on TP pumps are totally enclosed, fancooled motors with main dimensions to IEC and DIN standards. Electrical tolerances to IEC 3. Mounting designation Pump type Mounting designation - IEC 3-7 TP Series 1 TP Series 2 IM 361 (IM B 1) / IM 3611 (IM V 18) TP Series 3 IM 31 (IM B 5) / IM 311 (IM V 1) TP Series IM 31 (IM B 5) / IM 311 (IM V 1) Relative humidity: Max. 95 % Enclosure class: IP55 Insulation class: F, to IEC 85 Ambient temperature: Max. +55 C (IE2 and IE3 Siemens motors) Max +6 C (IE2 and IE3 MG motors) Max. + C (other motors) Min. -3 C If the pump is installed in humid locations, open the lowest drain hole in the motor. This will reduce the motor enclosure class to IP. High-efficiency motors TP pumps are fitted with high-efficiency motors. TP, TPD pumps with 2-pole three-phase motors from.75 to 75 kw are fitted with IE3 motors. TP, TPD pumps with -pole three-phase motors from.75 to 15 kw are fitted with IE3 motors. TP, TPD pumps with 2-pole three-phase motors of 9 kw are fitted with IE2 (EFF1) motors. TP, TPD pumps with -pole three-phase motors from 18.5 to 9 kw are fitted with IE2 (EFF1) motors. Motor range kw.12.18.25.37.55.75 1.1 1.5 2.2 3.. 5.5 7.5 11. 15. 18.5 22. 3. 37. 5. 55. 75. 9. 11. 132. 16. 2. 2. 315. 355... 56. 63. Electronically speedcontrolled motors Mains-operated motors 2-pole -pole 6-pole 2-pole -pole MEZ MG Siemens MEZ MG Siemens Siemens MGE MG and MGE are Grundfos motor brands. Siemens is a sourced high-quality motor brand. The grey-shaded areas indicate non-available motors. MGE TPE, TPED pumps with 2-pole three-phase motors from.75 to 22 kw are fitted with motors equivalent to IE3. TPE, TPED pumps with -pole three-phase motors from 1.1 to 15 kw are fitted with motors equivalent to IE2 (EFF1). TPE, TPED pumps with -pole three-phase motors of 18.5 kw are fitted with motors equivalent to IE1 (EFF2). 36

Motor data TP, TPD, TPE, TPED Motor protection MG, Siemens Single-phase motors have integrated, interconnected thermal switches. Three-phase motors must be connected to a motorprotective circuit breaker. All three-phase mains-operated motors can be connected to an external frequency converter. If you connect a frequency converter, the motor insulation system will often be overloaded, and the motor will be more noisy than in normal operation. In addition, large motors will be exposed to bearing currents caused by the frequency converter. If you operate the motor via a frequency converter, consider the following: In 2-, - and 6-pole motors of 5 kw (frame size 225) and upwards, isolate one of the motor bearings electrically to prevent damaging currents from passing through the motor bearings. If you have noise-sensitive applications, you can reduce the motor noise by fitting a du/dt filter between the motor and the frequency converter. For particularly noise-sensitive applications, we recommend a sinusoidal filter. The length of the cable between motor and frequency converter affects the motor load. Therefore, check that the cable length meets the specifications laid down by the frequency converter supplier. For supply voltages between and 69 V, fit either a du/dt filter to reduce voltage peaks, or use a motor with reinforced insulation. For supply voltages of 69 V, use a motor with reinforced insulation, and fit a du/dt filter. MGE MGE motors with built-in frequency converter do not require protection by a motor-protective circuit breaker. 37

Motor data TP, TPD, TPE, TPED Electrical data, mains-operated motors Electrical data, 2-pole 1 x 22-23/2 V Electrical data, 2-pole 3 x 38-15/66-69 V Motor I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ].12 1.5 1. 65 28-28 3.2-3.6.25 2.5/2.99 58 28 -.37 2.95/2.7.99 6 277 2.8.55 /3.65.99 66 27 2.8.75 5.1/.75.99 69 278 3. 1.1 7./6.7.98-.99-277 3.9/3.9 1.5 9.9/8.9.98-.99 72-7 27-27 3.9/3.9 Electrical data, 2-pole Motor 3 x 22-2/38-15 V I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ].12.59/.3.8-.72 71 28-28.2-.6.18.9/.52.79-.71 67 28-28.5.25 1.18/.68.81-.72 73 28-28.-..37 1.7/1.8-.7 78.5 28-288.9-5.3.55 2.5/1..8-.7 8 283-28 1.9.75 3.3/1.9.81-.71 8.7 28-287 5.8-6.2 1.1.35-2.5.83-.76 82.7 28-287.5-5. 1.5 5.5/3.15.87-.82 8.2 289-291 8.5-9.3 2.2 7.7/.5.89-.87 85.9 289-291 8.5-9.5 3. 11./6.3.87-.82 87.1 29-292 8.-9.2. 13.6/7.9.87 88.1 292-29 1-11.1 5.5 19.-11..87-.82 89.2 292-29 1.8-11.8 7.5 11. 15. 25.-2.2/ 1.-1. 36.-3.5/ 2.8-19.8 8.5-5./ 28.-26..88-.82 9. 291-292 7.8-9.1.88-.8 91.2 29-29 6.6-7.8.89-.87 91.9 293-29 6.6-7.8 18.5 59.-53.5/ 3.-31..9-.89 92. 293-29 7.1-8.5 22. 68.5/39.5.9 92.7 29 8.3 Electrical data, 2-pole 3 x 22-2/38-2 V Motor 3. 37. 5. 55. 75. I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ] 98.-91./ 56.-53. 118-11/ 68.-6. 1-132/ 81.-76. 172-16/ 99.-92. 236-22/ 136-126 I ------------ Start I 1/1 I ------------ Start I 1/1 I ------------ Start I 1/1.86 93.3 2955 7.8.86 93.7 29 7.6.89 9 296 7.3.89 9.3 2975 7..89 9.7 2975 7.2 Motor I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ] 2.2.5.89-.87 85.9 289-291 8.5-9.5 3. 6.3.87-.82 87.1 29-292 8.-9.2. 7.9.87 88.1 292-29 1-11 5.5 11..87-.82 89.2 292-29 7.5 11. 15. 1.-1./ 8.3-8.1 2.8-19.8/ 12.-11.8 28.-26./ 16.2-15.6 Electrical data, 2-pole 1.8-11.8.88-.82 9. 291-292 7.8-9.1.88-.8 91.2 29-29 6.6-7.8.89-.87 91.9 293-29 6.6-7.8 18.5 3.-31./ 19.6-18.8.9-.89 92. 293-29 7.1-8.5 22. 39.5/22.8.9 92.7 29 8.3 3. 55.-51./ 31.5-3..88 93.5 296 7. 37. 67.-63./ 38.5-36..89 9.1 296 7.2 5. 77/.5.89 9.9 297 7.3 55. 93/53.7.9 95.3 298 6.8 75. 128/73.9.89 95.2 298 7. 9. 1/86.6.9 95.6 298 7.6 11. 182/15.91 95.8 298 6.9 132. 22/127.91 96. 298 7.1 16. 26/1.92 96. 298 7.1 Motor 3. 37. 5. 55. 75. 3 x 38-2/66-725 V I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ] 56.-52./ 32.5-3. 68.-63./ 39.-36.5 81.-75./ 7.-3.5 99.-91./ 57.-53. 136-126/ 78.-73. I ------------ Start I 1/1 I ------------ Start I 1/1.86 93.3 2955 7.8.86 93.7 29 7.6.89 9. 296 7.3.89 9.3 2975 7..89 9.7 2975 7.2 38

Motor data TP, TPD, TPE, TPED Electrical data, -pole 1 x 22-23/2 V Electrical data, -pole 3 x 38-15/66-69 V Motor I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ].12.99.99 53.1 13 2.58.18 1.62.97 5 13-137 2..25 2.1.97 57 13-137 2.2.37 2.85.97 62 13-137 2..55.97 66 13-137 2.6.75 5.5.96 71 139-11 3.2 1.1 7.96 75 12-13 3.9 Electrical data, -pole Motor 3 x 22-2/38-15 V I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ].12.78/.5.67 5 138 3.2.25 1.8/.85.75-.65 69 1-12.-..37 1.9/1.1.77-.67 71 1-12.-..55 2.6/1.5.79-.7 77 139-11.3-.7.75 3.3/1.9.76-.71 82.5 1-1 6.6-7.2 1.1.85/2..71-.6 8.1 1-16 8.2-9. 1.5 6.15-6.3/ 3.55-3.65.75-.68 85.3 1-16 7.3-7.9 2.2 8.5/.9.79-.73 86.7 1 6.-6.6 3. 11./6.3.82-.76 87.7 1-1 7.-7.7. 16.2/9.3.75-.68 88.6 16 7.9-8.7 5.5 19./11..86-.8 89.6 16 7.6 7.5 11. 15. 18.5 22. 3. 26.-2.6/ 1.9-1.2 36.5-35.5/ 21.2-2..-8.5/ 29.-28. 62.-59./ 36.-3.5 72.-68./ 1.5-. 97.-92./ 56.-5. I ------------ Start I 1/1 I ------------ Start I 1/1.86-.82 9. 16 6.8-7.8.86-.81 91. 17-17 7.1-8.1.86-.82 92.1 16-17 7.6-8.7.83 92.5 17 6..8 93. 17 6.7.85 93.3 17 6.7 Motor I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ] 2.2 1.9.76-.71 82.5 1-1 6.6-7.2 3. 6.3.82-.76 87.7 1-1 7.-7.7. 9.3.75-.68 88.6 16 7.9-8.7 5.5 7.5 11. 15. 18.5 22. 11.-11./ 6.35-6.35 1.9-1.2/ 8.6-8. 21.2-2./ 12.2-12. 29.-28./ 16.8-16. 36.-3.5/ 2.5-2. 1.5-./ 2.-23.5 Electrical data, 6-pole.86-.8 89.6 16 7.-7.6.86-.82 9. 16 6.8-7.8.86-.81 91. 16-17 7.1-8.1.86-.82 92.1 16-17 7.6-8.7.83 92.5 17 6..8 93. 17 6.7 3. 56.-5./ 32.5-31.5.85 93.3 17 6.7 37. 67./38.5.85 9 18 6.8 5. 81./7..85 9.5 18 6.9 55. 96./55.5.87 95.1 19 7.5 75. 13./75..87 95.1 19 6.8 9. 158./91..86 95. 19 7.5 11. 19./11..87 95.9 19 7.1 132. 225./13..88 96.1 19 7.3 16. 275./16..88 96.3 19 7. 2. 3./196..88 96. 19 7.6 2. 25./25..88-188 - 315. 5./312..88-188 - 355. 61./3..87-188 -. 69./..87-188 -. 8./9..88-188 - 56. 9./5..88-192 - 63. 16./61..88-192 - Motor 3 x 22-2/38-15 V I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ] I ------------ Start I 1/1 I ------------ Start I 1/1 1.5 6.3/3.65.7 85 9 6.2 2.2 9.35/5..7 8 955 6.2 3. 1.5/6.1.85 8 955 6.6. 1.8/8.5.81 8 9 6.3 5.5 2.8/12..77 86 96 7.3 7.5 29.5/17.2.72 88 965 5.5 Electrical data, 6-pole 3 x 38-15/66-69 V Motor I 1/1 [A] Cos φ 1/1 η [%] n [min -1 ] I ------------ Start I 1/1 2.2 5./3.1.7 8 955 6.2 3. 6.1/3..8 8 955 6.9. 8./.9.81 8 9 6.3 5.5 12./6.95.77 96 96 7.3 7.5 17.2/9.85.72 88 965 5.5 39

Motor data TP, TPD, TPE, TPED Electrical data, speed-controlled motors Electrical data, 2-pole 1 x 2-2 V, 29 min -1 Motor I 1/1 [A].37 2.7-2.5.55 3.9-3.6.75 5.1 -.7 1.1 7.1-6.6 Electrical data, 2-pole 3 x 38-8 V, 29 min -1 Motor I 1/1 [A].75 2. - 1.8 1.1 2.6-2.3 1.5 3.3-2.7 2.2.6-3.8 3. 6.2-5.. 8.1-6.6 5.5 11. - 8.8 7.5 1.8-11.6 11. 22.5-18.8 15. 3-26. 18.5 37-31. 22. 3.5-35. Electrical data, -pole 1 x 2-2 V, 1 min -1 Motor I 1/1 [A].37 2.8-2.6.55. - 3.6.75 5.3 -.85 Electrical data, -pole 3 x 38-8 V, 1 min -1 Motor I 1/1 [A].55 1.5-1.6.75 1.8-1.9 1.1 2.5-2.2 1.5 3.3-2.9 2.2.6-3.8 3. 6.2-5.. 8.1-6.6 5.5 11-9. 7.5 15. - 12. 11. 22. - 17.8 15. 3. - 25. 18.5 37. - 3.

Installation TP, TPD, TPE, TPED Mechanical installation TP, TPD, TPE, TPED pumps with motors smaller than 11 kw can be installed in horizontal or vertical pipework. Twin-head pump housings have two Rp 1/ tappings (TP Series 2) or four Rp 1/8 tappings (TP Series 3) for mounting of automatic air vents. Fig. 23 Installation of motor sizes smaller than 11 kw TP, TPD, TPE, TPED pumps with motors of 11 kw and up may only be installed in horizontal pipes with the motor in vertical position. TM 373 897 Fig. 26 Tappings for mounting of automatic air vents in TP Series 2 and TP Series 3 For further information about identification of TP Series 2 and TP Series 3 models, see pages 21 to 23. If the liquid temperature falls below the ambient temperature, condensation may form in the motor during inactivity. In this case, the drain hole in the motor flange must be open and points downwards. See fig. 27. TM2 7533 373 Fig. 2 Installation of motor sizes of 11 kw and up Note: The motor must never point downwards. Install the pumps in such a way that strain from the pipework is not transferred to the pump housing. Pumps with motors smaller than 11 kw may be suspended direct in the pipes, provided the pipework can support the pump. If not, install the pump on a mounting bracket or base plate. Pumps with motors of 11 kw and up may only be installed in horizontal pipes with the motor placed in vertical position. Always install the pump on an even and rigid foundation. When installing a twin-head pump in a horizontal pipe and with horizontal shaft, fit the upper pump housing with an automatic air vent. TM 3735 897 Fig. 27 Drain hole If twin-head pumps are used for pumping liquids with a temperature below C/32 F, condensed water may freeze and cause the coupling to get stuck. The problem can be remedied by installing heating elements. Whenever possible, pumps with motors smaller than 11 kw should be installed with horizontal motor shaft. See fig. 25. TM3 8127 7 TM 9831 322 Fig. 25 Twin-head pumps with automatic air vent 1

Installation TP, TPD, TPE, TPED Cooling To ensure sufficient cooling of motor and electronics, observe the following: Place the pump in such a way that sufficient cooling is ensured. Make sure that the temperature of the cooling air does not exceed + C. Keep the motor cooling fins, holes in fan cover and fan blades clean. Make sure the frequency for the motor is at least 6 Hz (12 % of maximum speed). The shaft seal could make noise at speeds below 25 % of maximum speed. Condensation cover for TPE pumps When installing TPE pumps outdoors, provide the motor with a suitable cover to avoid condensation on the electronic components and to protect the pump and motor against the direct effects of the elements. When mounting the condensation cover on top of the motor, make sure to leave enough space for the air to cool the motor. Elimination of noise and vibrations In order to achieve optimum operation and minimum noise and vibration, consider vibration dampening of the pump. Generally, always consider this for pumps with motors of 11 kw and up, but for motors of 9 kw and up vibration dampening should be considered as mandatory. Smaller motor sizes, however, may also cause undesirable noise and vibration. Noise and vibration are generated by the revolutions of the motor and pump and by the flow in pipes and fittings. The effect on the environment is subjective and depends on correct installation and the state of the remaining system. Elimination of noise and vibrations is best achieved by means of a concrete foundation, vibration dampers and expansion joints. Concrete foundation Expansion joint Fig. 28 Speed-controlled motors with condensation cover TM2 851 3 Vibration dampers Fig. 29 Foundation of TP pump Concrete foundation Install the pump on a plane and rigid concrete foundation. This is the optimum solution for vibration dampening. As a rule of thumb, the weight of a concrete foundation should be 1.5 times the pump weight. TM2 993 212 2

Installation TP, TPD, TPE, TPED Recommended concrete foundations for TP(D) Series 3 pumps For TP Series 3 pumps with weights of 1 kg or more, it is recommended to mount the pump on a concrete foundation with the dimensions stated in the table below. The same recommendation applies for TPD Series 3 pumps with weights of 3 kg or more. Fig. 3 Foundation for TP(D) Series 3 pumps TM3 919 37 Vibration dampers To prevent the transmission of vibrations to buildings, we recommend you to isolate the pump foundation from building parts by means of vibration dampers. The selection of the right vibration damper requires the following data: forces transmitted through the damper motor speed considering speed control, if any required dampening in % (suggested value is 7 %). Which is the right damper varies from installation to installation, and a wrong damper may increase the vibration level. Vibration dampers should therefore be sized by the supplier. If you install the pump on a foundation with vibration dampers, always fit expansion joints on the pump flanges. This is important to prevent the pump from "hanging" in the flanges. Pump mass [kg] Concrete foundation dimensions Y (height) [mm] Z (length) [mm] X (width) [mm] 1 28 565 565 2 31 62 62 2 33 67 67 3 36 71 71 3 375 7 7 39 78 78 1 81 81 2 8 8 5 87 87 6 9 9 6 6 92 92 7 7 9 9 7 8 97 97 8 9 99 99 8 11 11 9 51 13 13 9 52 1 1 1 53 16 16 1 5 18 18 11 5 11 11 11 56 11 11 12 56 113 113 12 57 11 11 13 58 116 116 13 59 118 118 1 6 119 119 1 6 12 12 1 61 122 122 15 62 123 123 16 62 12 12 16 63 12 12 17 635 127 127 3

Installation TP, TPD, TPE, TPED Expansion joints Install expansion joints to absorb expansions/contractions in the pipework caused by changing liquid temperature. reduce mechanical strains in connection with pressure surges in the pipework. isolate mechanical structure-borne noise in the pipework (only rubber bellows expansion joints). Note: Do not install expansion joints to compensate for inaccuracies in the pipework such as centre displacement of flanges. Fit expansion joints at a distance of minimum 1 to 1.5 times the nominal flange diameter away from the pump on the suction as well as on the discharge side. This will prevent the development of turbulence in the expansion joints, resulting in better suction conditions and a minimum pressure loss on the pressure side. At high water velocities (> 5 m/s) we recommend you to install larger expansion joints corresponding to the pipework. See fig. 31. The illustration below shows an example of a metal bellows expansion joint with limit rods. Fig. 33 Example of metal expansion joint Due to the risk of rupture of the rubber bellows, metal bellows expansion joints may be preferred at temperatures above +1 C combined with high pressure. TM2 98 192 Expansion joints Fig. 31 TP pump installed with larger expansion joints The illustration below shows examples of rubber bellows expansion joints with or without limit rods. TM2 979 192 - TM2 981 192 TM 9629 81 Fig. 32 Examples of rubber bellows expansion joints Expansion joints with limit rods can be used to reduce the effects of the expansion/contraction forces on the pipework. We always recommend expansion joints with limit rods for flanges larger than DN 1. Anchor the pipes in such a way that they do not stress the expansion joints and the pump. Follow the supplier s instructions and pass them on to advisers or pipe installers.

Installation TP, TPD, TPE, TPED Terminal box positions TP single-head pumps As standard, the terminal boxes of TP and TPE pumps are mounted in position 9 o clock. The possible terminal box positions are shown below. 3 Stellung o clock 3 6 o clock 9 o clock Standard Stellung 6 Stellung 9 Stellung 12 Fig. 3 Possible terminal box positions 12 o clock Note: Due to the motor construction the terminal boxes of some TP pumps with motor sizes above 2 kw are mounted in position 1:3. TPD twin-head pumps As standard, the terminal boxes of all TPD and most TPED pumps are mounted in position 12 o clock. See fig. 3. The TPED pumps with terminal boxes installed in other positions are listed in the table. See example in fig. 35. Fig. 35 Terminal box positions of TPED pumps Note: The dimension can be seen in the tables of technical data of the individual pump. See the sections on performance curves and technical data. TM3 565 25 TM2 863 6 TPED pumps with terminal boxes installed in positions different from 12 o clock Single-phase Three-phase TPED 32-6/2.37 TPED 32-23/2.75 TPED 32-12/2.37 TPED 32-2/2 1.1 TPED -6/2.37 TPED 32-2/2 1.5 TPED -12/2.37 TPED 32-32/2 2.2 TPED -6/2.37 TPED 32-38/2 3. TPED 32-3/.37 TPED 32-6/2. TPED -3/.37 TPED 32-58/2 5.5 TPED -3/.37 TPED -19/2.75 TPED -23/2 1.1 TPED -27/2 1.5 TPED -2/2 2.2 TPED -3/2 3. TPED -36/2. TPED -7/2 5.5 TPED -58/2 7.5 TPED -12/2.75 TPED -16/2 1.1 TPED -18/2.75 TPED -19/2 1.5 TPED -2/2 2.2 TPED -29/2 3. TPED -36/2. TPED -3/2 5.5 TPED -57/2 11 TPED -71/2 15 TPED -83/2 18.5 TPED -9/2 22 TPED 65-12/2 1.1 TPED 65-18/2 1.5 TPED 65-19/2 2.2 TPED 65-23/2 3. TPED 65-26/2. TPED 65-3/2 5.5 TPED 65-1/2 7.5 TPED 65-6/2 11 TPED 65-5/2 15 TPED 65-66/2 18.5 TPED 65-72/2 22 TPED 8-12/2 1.5 TPED 8-21/2. TPED 8-2/2 5.5 TPED 8-33/2 11 TPED 8-/2 15 TPED 8-52/2 18.5 TPED 8-57/2 22 TPED 1-12/2 2.2 TPED 65-6/.55 TPED 65-9/.75 TPED 8-6/.75 TPED 1-3/.55 TPED 1-6/ 1.1 5

Installation TP, TPD, TPE, TPED Electrical installation Electrical connection Carry out electrical connection and protection in accordance with local regulations. The pump must be connected to an external mains switch with a minimum contact gap of 3 mm in all poles. Electronically speed-controlled pumps must always be correctly earthed. Note: The. - 22 kw motors must be connected to especially reliable/sturdy earth connections to avoid earth leakage currents above 3.5 ma. Single-phase motors incorporate thermal protection and require no additional motor protection. Three-phase mains-operated motors must be connected to a motor-protective circuit breaker. Motors as from 3 kw have thermistors (PTC). The thermistors are designed according to DIN 82. When the pump is switched on via the mains, the pump will start after approx. 5 seconds. Note: Carry out the mains connection of the pump as shown in the diagram inside the terminal box cover. Do not start the pump until it has been filled with liquid and vented. Protection Protection against fault currents If the pump is connected to an electric installation where an earth leakage circuit breaker (ELCB) is used as additional protection, the earth leakage circuit breaker must be marked with the following symbols. Single-phase: Protection against voltage peaks If you use speed controllers or frequency converters of other makes than Grundfos, you may have the following problems: increased motor noise detrimental voltage peaks additional motor losses. Pumps with voltage peaks exceeding 6 V (maximum value) must therefore be protected. The voltage increase rate du/dt must not exceed Vμs. Noise and detrimental voltage peaks can be prevented by fitting an LC filter between the speed controller and the motor. Communication cables for TPE, TPED Use screened cables (min..5 mm 2 ) for external on/off switch, digital input, sensor and setpoint signals. The screens of the cables should be connected to frame at both ends. The screen of the cable must have good frame connection which must be as close as possible to the terminals. Screen Fig. 36 External start/stop cable connection of TPE, TPED Use a screened 2-core cable for the bus connection. Connect the screen to terminal Y at both ends. TM2 1325 91 The earth leakage circuit breaker must trip out when earth fault currents with DC content (pulsating DC) occur. Three-phase: The earth leakage circuit breaker must trip out when earth fault currents with DC content (pulsating DC) and smooth DC earth fault currents occur. Screen Fig. 37 Bus connection of TPE, TPED Y TM2 133 11 6

Installation TP, TPD, TPE, TPED Other connections, TPE, TPED See the wiring diagrams for instructions on how to connect external potential-free contacts for start/stop and digital function, external setpoint signal and fault signal. Connect the wires to the following terminal groups: Wiring diagram, three-phase,.75-7.5 kw NC C NO Group 2 L1 L2 L3 Group 3 Group 1: Inputs (external start/stop, digital function, setpoint and sensor signals, terminals 1-9 and bus connection, A, Y, B). All inputs are separated from the mains conducting parts by reinforced insulation. Group 2: Output (signal relay). The output, terminals C, NO and NC, are galvanically separated from other circuits. Therefore, the supply voltage or protective extra-low voltage can be connected to the output as desired. -1 V /-2 ma -2 ma 1/ 1 9 8 7 B Y A Group 1 STOP Group 3: Mains supply. Note: As a precaution, separate the wires from each other by reinforced insulation in their entire lengths. If no external on/off switch is connected, maintain the connection across terminals 2 and 3. Wiring diagram, single-phase RUN /-2 ma -1 V 1K 6 5 3 2 Fig. 39 Wiring diagram, three-phase TPE pumps Wiring diagram, three-phase, 11-22 kw TM2 81 513 Signal relay NC C NO Group 2 N PE L Mains connection Group 3 Group 2 Group 3-1 V /-2 ma -2 ma /1 1 9 8 7 B Y A STOP RUN /-2 ma -1 V 1K 6 5 3 2 Group 1 TM2 795 11 Group 1 Fig. Wiring diagram, three-phase TPE pumps TM3 868 27 Fig. 38 Wiring diagram, single-phase TPE pumps 7

Flanges for TP pumps TP, TPD, TPE, TPED Flange dimensions PN 6 and PN 1 flanges D 1 D 2 D 3 S TM2 772 383 EN 192-2 PN 6 (.6 MPa) EN 192-2 PN 1 (1. MPa) Nominal diameter (DN) Nominal diameter (DN) 32 65 8 1 32 65 8 1 125 1 2 2 D 1 32 65 8 1 32 65 8 1 125 1 2 2 D 2 9 1 11 13 1 17 1 11 125 15 16 18 21 2 295 3 D 3 12 13 1 16 19 21 1 1 165 185 2 22 2 285 3 395 S x1 x1 x1 x1 x19 x19 x19 x19 x19 x19 8x19 8x19 8x19 8x23 8x23 12x23 PN 16 and PN 25 flanges D 1 D 2 D 3 S TM2 772 383 EN 192-2 PN 16 (1.6 MPa) EN 192-2 PN 25 (2.5 MPa) Nominal diameter (DN) Nominal diameter (DN) 32 65 8 1 125 1 2 1 125 1 2 2 3 3 D 1 32 65 8 1 125 1 2 1 125 1 2 2 3 3 D 2 1 11 125 15 16 18 21 2 295 19 22 2 31 37 3 9 D 3 1 1 165 185 2 22 2 285 3 235 27 3 36 25 85 555 S x19 x19 x19 x19 8x19 8x19 8x19 8x23 12x23 8x23 8x28 8x28 12x28 12x31 16x31 16x3 PN flanges D 1 D 2 D 3 S TM2 772 383 EN/DIN 2635 PN (. MPa) Nominal diameter (DN) D 1 D 2 585 585 D 3 66 66 S 16x2 2x2 8

Curve charts TP, TPD, TPE, TPED How to read the curve charts H 6 55 5 35 3 25 2 15 1-58/2-6/2-38/2-32/2-2/2-2/2 TP, TPE 32 Hz 8 12 16 2 2 Q [m³/h] 6-58/2 5-6/2 Pump type and frequency QH curve for the individual single-head pump. The bold curve indicates the recommended performance range. The power curve indicates pump input power [P 2 ]. 3 2 1-2/2-2/2-32/2-38/2 8 12 16 2 2 Q [m³/h] NPSH 16 12 8 Eta [%] 6 55 5 35 8 12 16 2 2 Q [m³/h] -2/2-2/2-32/2-38/2-6/2-58/2 The NPSH (3 %) curve shows the required net positive suction head (NPSH) to ensure that the pump head is not reduced by more than 3 %. The available system pressure at the pump inlet must be according to the NPSH (3 %) curve + a safety margin of at least.5 m. The eta curve shows the pump efficiency. 3 8 12 16 2 2 Q [m³/h] 2 6 Q [l/s] 2 6 v [m/s] TM2 17 212 9

Curve charts TP, TPD, TPE, TPED Curve conditions The guidelines below apply to the curves shown on the following pages: Tolerances to ISO 996, Annex A. The curves apply to the performance of single-head three-phase pumps. For other pump versions, please see the exact curves in WinCAPS or WebCAPS. For other pump versions, the performance may differ for the following reasons: - The valve in twin-head pumps may cause losses. - Single-phase motors run at lower speed. Note: Grundfos does not recommend continuous parallel operation of twin-head pumps due to the increased flow in the pump. A too high flow results in noisy operation, increased wear of the impeller due to cavitation, etc. QH curves of the individual single-head pumps are shown with expected speed of a three-phase mainsoperated motor. For further information, see the tables of technical data on the following pages. The performance of the single-phase motor is slightly reduced. Please refer to WinCAPS or WebCAPS for the exact single-phase curves. Curves of TPE Series 1 pumps and TPE Series 2 pumps are shown as nominal curves (1 % curves) only. Please refer to WinCAPS for the exact curves. Measurements have been made with airless water at a temperature of +2 C. The curves apply to a kinematic viscosity of υ =1mm 2 /s (1 cst). Due to the risk overheating, the pump must not run constantly below the minimum flow rate indicated by the bold curves. If the pumped liquid density and/or viscosity are higher than those of water, it may be necessary to use a motor with a higher performance.

51

Technical data/ performance curves G 1 1/2 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED, 2-pole, PN 6, 1, 16 TP, TPE 25-XX /2 R H 9 8 7 6 5 3 2-9/2 R -/2 R TP, TPE 25 Hz 1.2.16.12 1 2 3 5 6 7 Q [m³/h] -9/2 R.8 -/2 R.. 1 2 3 5 6 7 Q [m³/h] NPSH 3 -/2 R, -9/2 R 2 1 Eta [%] 5 35 3 25 2 1 2 3 5 6 7 Q [m³/h] -/2 R -9/2 R 1 2 3 5 6 7 Q [m³/h]..5 1. 1.5 2. Q [l/s] 1 2 3 v [m/s] TM2 1 9 52

Performance curves G 1 1/2 2-pole, PN 6, 1, 16 TM2 838 337 H1 G H2 H3 H3 B1 B2 L1 AE AF Technical data TP 25 -/2 R -9/2 R TPD - - TPE TPED - - Series 1 1 1-phase TP 63 71 IEC size 3-phase TP 63 63 1-phase TPE 71 71 3-phase TPE - - 1-/3-phase TP.12/.12.25/.25 1-/3-phase TPE.37/-.37/- PN 1 1 T min ; T max [ C] [-25;11] [-25;11] G G 1 ½ G 1 ½ 1-/3-phase TP [mm] 118/118 139/118 1-/3-phase TPE [mm] 11/- 11/- 1-/3-phase TP [mm] 11/11 111/11 1-/3-phase TPE [mm] 1/- 1/- AE 1-/3-phase TPE [mm] 15/- 15/- AF 1-/3-phase TPE [mm] 15/- 15/- B1 [mm] 5 5 B2 [mm] 52 52 1-/3-phase TP [mm] 11/- 111/- 1-/3-phase TPE [mm] 1/- 1/- L1 [mm] 18 18 H1 [mm] 25 25 H2 [mm] 118 118 H3 1-/3-phase TP [mm] 323/323 353/323 1-/3-phase TPE [mm] 33/- 33/- 53

Technical data G 2 2-pole, PN 6, 1, 16 TP, TPE 32-XX/2 H 9 8 7 6 5 3 2-9/2 R -/2 R TP, TPE 32 Hz 1 1 2 3 5 6 7 8 9 Q [m³/h].2.2.16.12.8.. -/2 R -9/2 R 1 2 3 5 6 7 8 9 Q [m³/h] NPSH 3. -9/2 R 2.5 2. 1.5 1..5. Eta [%] 55 5 35 3 25 2 -/2 R 1 2 3 5 6 7 8 9 Q [m³/h] -/2 R -9/2 R 1 2 3 5 6 7 8 9 Q [m³/h]..5 1. 1.5 2. 2.5 Q [l/s]..5 1. 1.5 2. 2.5 v [m/s] TM2 15 9 5

Performance curves G 2 2-pole, PN 6, 1, 16 TM2 838 H1 G H2 H3 H3 B1 B2 L1 AE AF Technical data TP 32 -/2 R -9/2 R TPD - - TPE TPED - - Series 1 1 1-phase TP 63 71 IEC size 3-phase TP 63 63 1-phase TPE 71 71 3-phase TPE - - 1-/3-phase TP.12/.12.25/.25 1-/3-phase TPE.37/-.37/- PN 1 1 T min ; T max [ C] [-25;11] [-25;11] G G 2 G 2 1-/3-phase TP [mm] 118/118 139/118 1-/3-phase TPE [mm] 11/- 11/- 1-/3-phase TP [mm] 11/11 111/11 1-/3-phase TPE [mm] 1/- 1/- AE 1-/3-phase TPE [mm] 15/- 15/- AF 1-/3-phase TPE [mm] 15/- 15/- B1 [mm] 51 51 B2 [mm] 6 6 1-/3-phase TP [mm] 11/- 111/- 1-/3-phase TPE [mm] 1/- 1/- L1 [mm] 18 18 H1 [mm] H2 [mm] 118 118 H3 1-/3-phase TP [mm] 338/338 368/338 1-/3-phase TPE [mm] 33/- 33/- 55

Technical data DN 32 2-pole, PN 6, 1, 16 TPED 32-XX/2 H 2-23/2 TP, TPE 32 22 Hz 2 18-18/2 16 1 12-1/2-12/2 1 8 6-6/2 2 1 2 3 5 6 7 8 9 1 11 Q [m³/h] -23/2.7.6.5-18/2. -1/2-12/2.3.2-6/2.1. 1 2 3 5 6 7 8 9 1 11 Q [m³/h] NPSH 1 8 6 2-1/2, -18/2, -23/2-12/2-6/2 H 6 55 5 35 3 25 2 15 1 3 2 1-58/2-6/2-38/2-32/2-2/2-2/2 TP, TPE 32 Hz 8 12 16 2 2 Q [m³/h] 6-58/2 5-2/2-2/2-32/2-6/2-38/2 8 12 16 2 2 Q [m³/h] NPSH 16 12 8 Eta [%] 6 55 5 35 3 25 2 1 2 3 5 6 7 8 9 1 11 Q [m³/h] -18/2-6/2-12/2-23/2-1/2 1 2 3 5 6 7 8 9 1 11 Q [m³/h] Eta [%] 6 55 5 35 3 8 12 16 2 2 Q [m³/h] -2/2-2/2-32/2-38/2-6/2-58/2 8 12 16 2 2 Q [m³/h]..5 1. 1.5 2. 2.5 3. Q [l/s]..5 1. 1.5 2. 2.5 3. v [m/s] TM2 16 9 2 6 Q [l/s] 2 6 v [m/s] TM2 17 81 Note: All curves apply to single-head pumps. For further information, see page. 56

Performance curves DN 32 2-pole, PN 6, 1, 16 P B3 P AF H3 AE D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 337 - TM2 8631 Technical data TP 32-6/2-12/2-1/2-18/2-23/2-2/2-2/2-32/2-38/2-6/2-58/2 TPD TPE TPED Series 2 2 2 2 2 3 3 3 3 3 3 IEC size 1-phase TP 71 71 71 8 8 - - - - - - 3-phase TP 63 71 71 71 8 8 9 9 1 112 132 1-phase TPE 71 71 71 71 8 8 - - - - - 3-phase TPE - - - - 9 8 9 9 1 112 132 1-/3-phase TP.25/.25.37/.37.37/.37.55/.55.75/.75 -/1.1 -/1.5 -/2.2 -/3 -/ -/5.5 1-/3-phase TPE.37/-.37/-.37/-.55/-.75/.75 1.1/1.1 -/1.5 -/2.2 -/3 -/ -/5.5 PN PN 6/1 PN 6/1 PN 6/1 PN 6/1 PN 6/1 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;1] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 32 32 32 32 32 32 32 32 32 32 32 1-/3-phase TP [mm] 12/12 11/12 11/11 11/11 11/11 -/11 -/178 -/178 -/198 -/22 -/22 1-/3-phase TPE [mm] 11/- 11/- 11/- 11/- 11/178 11/178 -/178 -/178 -/198 -/22 -/22 1-/3-phase TP [mm] 11/11 133/133 133/19 133/19 133/19 -/19 -/11 -/11 -/12 -/13 -/13 1-/3-phase TPE [mm] 1/- 1/- 1/- 1/- 1/167 1/167 -/167 -/167 -/177 -/188 -/188 AE 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/- 15/132 15/15 -/132 -/132 -/132 -/15 -/15 AF 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/- 15/132 15/15 -/132 -/132 -/132 -/15 -/15 P [mm] 9/9 - - - - 2 2 2 2 2 3 B1 [mm] 75/176 75/18 12/222 12/222 12/222 125/26 125/26 125/26 125/26 1/321 1/321 B2 [mm] 75/176 75/18 12/222 12/222 12/222 117/257 117/257 117/257 117/257 1/321 1/321 B3 [mm] 2 2 2 2 2 276 276 276 276 355 355 1-phase TPE [mm] 1/26 1/26 1/225 1/225 1/225 1/338 - - - - - TP [mm] 75/176 133/18 133/222 133/222 133/222 125/26 125/26 125/26 125/263 1/321 1/328 3-phase TPE [mm] - - - - 167/32 1/338 167/338 167/338 177/3 188/3 188/3 C1 [mm] 8/2 8/2 8/2 8/2 8/2 1/356 1/356 1/356 1/356 1/35 1/35 C5 [mm] 11/52 11/52 1/82 1/82 1/82 17/5 17/5 17/5 17/5 22/6 22/6 C6 [mm] 13 13 13 13 13 175 175 175 175 175 175 L1 [mm] 22 22 28 28 28 3 3 3 3 H1 [mm] 68 68 79 79 79 1 1 1 1 1 1 H2 [mm] 1/139 126 125 125 137 15 15 15 183 18 223 1-/3-phase TP [mm] 387/386 385/385 395/395 7/395 7/7 -/5 -/535 -/575 -/618 -/656 -/71 H3 1-/3-phase TPE [mm] 7/- 385/- 395/- 395/- 7/97 85/535 -/535 -/575 -/618 -/656 -/71 H [mm] - - - - - - - - - - - M M12 M12 M12 M12 M12 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump and the dimension after the slash applies to the twin-head pump. 57

Technical data DN 2-pole, PN 6, 1, 16 TP, TPE -XX/2 H 1 9 8 7 6 5 3 2 1.2.16.12.8. -9/2 -/2 TP, TPE Hz 1 2 3 5 6 7 8 9 Q [m³/h].2 -/2-9/2 H 28 26 2 22 2 18 16 1 12 1 8 6 2 1. 1.2 1..8.6..2-27/2-23/2-19/2-18/2-12/2-6/2 TP, TPE Hz 2 6 8 1 12 1 16 Q [m³/h] -19/2-27/2-23/2-6/2-18/2-12/2. 1 2 3 5 6 7 8 9 Q [m³/h] NPSH 3. -9/2. 2 6 8 1 12 1 16 Q [m³/h] NPSH 1-19/2, -23/2, -27/2 2.5 2. 1.5 1..5. Eta [%] 6 55 5 35 3 25 2 -/2 1 2 3 5 6 7 8 9 Q [m³/h] -/2-9/2 1 2 3 5 6 7 8 9 Q [m³/h] 8 6 2 Eta [%] 75 7 65 6 55 5 35 3 2 6 8 1 12 1 16 Q [m³/h] -6/2-12/2-18/2-6/2-23/2-18/2-12/2-19/2-27/2 2 6 8 1 12 1 16 Q [m³/h]..5 1. 1.5 2. 2.5 Q [l/s]..5 1. 1.5 2. v [m/s] TM2 18 9 1 2 3 Q [l/s] 1 2 3 v [m/s] TM2 19 81 Note: All curves apply to single-head pumps. For further information, see page. 58

Performance curves DN 2-pole, PN 6, 1, 16 P B3 P AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP -/2-6/2-9/2-12/2-18/2-19/2-23/2-27/2 TPD - - - TPE - TPED - - - Series 1 2 1 2 2 2 2 2 IEC size 1-phase TP 63 71 71 71 8 8 9 9 3-phase TP 63 71 63 71 71 8 8 9 1-phase TPE 71 71 71 71 71 8 8-3-phase TPE - - - - - 9 9 9 1-/3-phase TP.12/.12.25/.25.25/.25.37/.37.55/.55.75/.75 1.1/1.1 1.5/1.5 1-/3-phase TPE.37/-.37/-.37/-.37/-.55/-.75/.75 1.1/1.1 -/1.5 PN PN 6/1 PN 6/1 PN 6/1 PN 6/1 PN 6/1 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;11] [-25;1] [-25;11] [-25;1] [-25;1] [-25;1] [-25;1] [-25;1] D1 [mm] 1-/3-phase TP [mm] 118/118 11/11 139/118 11/11 11/11 11/11 178/11 178/178 1-/3-phase TPE [mm] 11/- 11/- 11/- 11/- 11/- 11/178 11/178 -/178 1-/3-phase TP [mm] 11/11 133/19 111/11 133/19 133/19 133/19 139/19 139/11 1-/3-phase TPE [mm] 1/- 1/- 11/- 1/- 11/- 1/167 1/167 -/167 AE 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/- 15/- 15/132 15/132 -/132 AF 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/- 15/- 15/132 15/132 -/132 P [mm] - - - - - - - - B1 [mm] 75/- 75/18 75/- 75/18 1/- 12/222 12/222 12/222 B2 [mm] 75/- 75/18 75/- 75/18 1/- 12/222 12/222 12/222 B3 [mm] - 2-2 - 2 2 2 1-phase TPE [mm] 1/275 1/26 11/275 1/26 11/225 1/225 1/225 - TP [mm] 11/- 133/18 111/- 133/18 133/- 133/222 139/222 139/222 3-phase TPE [mm] - - - - - 167/32 167/32 167/32 C1 [mm] -/- 8/2 -/- 8/2 8/- 12/2 12/2 12/2 C5 [mm] -/- 125/5 -/- 125/5 125/- 16/95 16/95 16/95 C6 [mm] - 125-125 - 125 125 125 L1 [mm] 2 2 2 2 2 32 32 32 H1 [mm] 55 67 55 67 68 68 68 68 H2 [mm] 118 129 118 129 131 11 11 151 1-/3-phase TP [mm] 353/353 387/366 383/353 387/387 2/39 39/39 99/51 539/ H3 1-/3-phase TPE [mm] 36/- 395/- 36/- 388/- 39/- 32/9 39/9 -/ H [mm] - - - - - - - - M - M12 - M12 M12 M12 M12 M12 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 59

Technical data DN 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED -XX/2 H 6 55 5 35 3 25 2 15 1 7 6 5 3 2 1-58/2-7/2-36/2-3/2-2/2 TP, TPE Hz 8 12 16 2 2 28 32 Q [m³/h] 8-7/2-2/2-3/2-58/2-36/2 8 12 16 2 2 28 32 Q [m³/h] NPSH 1 8-3/2, 36/2, 7/2, 58/2 6-2/2 2 Eta [%] 6 55 5 35 3 8 12 16 2 2 28 32 Q [m³/h] -3/2-36/2-2/2-7/2-58/2 8 12 16 2 2 28 32 Q [m³/h] 2 6 8 1 Q [l/s] 2 6 v [m/s] TM2 2 Note: All curves apply to single-head pumps. For further information, see page. 6

Performance curves DN 2-pole, PN 6, 1, 16 P B3 P AF H3 AE D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP -2/2-3/2-36/2-7/2-58/2 TPD TPE TPED Series 3 3 3 3 3 IEC size 1-phase TP - - - - - 3-phase TP 9 1 112 132 132 1-phase TPE - - - - - 3-phase TPE 9 1 112 132 132 1-/3-phase TP -/2.2 -/3 -/ -/5.5 -/7.5 1-/3-phase TPE -/2.2 -/3 -/ -/5.5 -/7.5 PN PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1-/3-phase TP [mm] -/178 -/198 -/22 -/22 -/26 1-/3-phase TPE [mm] -/178 -/198 -/22 -/22 -/26 1-/3-phase TP [mm] -/11 -/12 -/13 -/13 -/159 1-/3-phase TPE [mm] -/167 -/177 -/188 -/188 -/213 AE 1-/3-phase TPE [mm] -/132 -/132 -/15 -/15 -/15 AF 1-/3-phase TPE [mm] -/132 -/132 -/15 -/15 -/15 P [mm] 2 2 2 3 3 B1 [mm] 13/273 13/273 13/273 19/325 19/325 B2 [mm] 117/267 117/267 117/267 1/321 1/321 B3 [mm] 29 29 29 355 355 1-phase TPE [mm] - - - - - TP [mm] 13/273 13/273 13/273 1/328 159/328 3-phase TPE [mm] 167/35 177/351 188/37 188/3 213/1 C1 [mm] 1/ 1/ 1/ 1/35 1/35 C5 [mm] 17/5 17/5 17/5 22/18 22/18 C6 [mm] 175 175 175 175 175 L1 [mm] 3 3 3 H1 [mm] 1 1 1 11 11 H2 [mm] 166 19 19 225 225 1-/3-phase TP [mm] -/587 -/629 -/666 -/726 -/71 H3 1-/3-phase TPE [mm] -/587 -/629 -/666 -/726 -/71 H [mm] - - - - - M M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 61

Technical data DN 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED -XX/2 H 28 2 2 16 12 8-29/2-2/2-19/2-16/2-18/2-12/2-6/2 TP, TPE Hz 3. 2.5 2. 8 12 16 2 2 28 32 Q [m³/h] -2/2-29/2 1.5 1..5. -19/2-16/2-18/2-12/2-6/2 8 12 16 2 2 28 32 36Q [m³/h] NPSH 1 8-18/2 6 2 Eta [%] 75 7 65 6 55 5 35 3-6/2-12/2-16/2, -19/2, 2/2, -29/2 8 12 16 2 2 28 32 Q [m³/h] -18/2-16/2-12/2-6/2-2/2-19/2-29/2 8 12 16 2 2 28 32 Q [m³/h] 2 6 8 1 Q [l/s] 1 2 3 v [m/s] TM2 21 81 Note: All curves apply to single-head pumps. For further information, see page. 62

Performance curves DN 2-pole, PN 6, 1, 16 P B3 P AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP -6/2-12/2-18/2-16/2-19/2-2/2-29/2 TPD TPE TPED Series 2 2 2 3 3 3 3 IEC size 1-phase TP 71 8 8 - - - - 3-phase TP 71 8 8 8 9 9 1 1-phase TPE 71 8 8 8 - - - 3-phase TPE - 9 9 8 9 9 1 1-/3-phase TP.37/.37.75/.75.75/.75 -/1.1 -/1.5 -/2.2 -/3 1-/3-phase TPE.37/-.75/.75.75/.75 1.1/1.1 -/1.5 -/2.2 -/3 PN PN 6/1 PN 6/1 PN 6/1 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1-/3-phase TP [mm] 11/11 11/11 11/11 -/11 -/178 -/178 -/198 1-/3-phase TPE [mm] 11/- 11/178 11/178 178/11 -/178 -/178 -/198 1-/3-phase TP [mm] 133/133 133/133 133/19 -/19 -/11 -/11 -/12 1-/3-phase TPE [mm] 1/- 1/167 1/167 1/167 -/167 -/167 -/177 AE 1-/3-phase TPE [mm] 15/- 15/132 15/132 15/132 -/132 -/132 -/132 AF 1-/3-phase TPE [mm] 15/- 15/132 15/132 15/132 -/132 -/132 -/132 P [mm] 15/15 12/12-2 2 2 2 B1 [mm] 9/177 1/221 1/225 117/252 117/252 117/252 117/252 B2 [mm] 75/188 1/221 1/225 117/252 117/252 117/252 117/252 B3 [mm] 2 2 2 27 27 27 27 1-phase TPE [mm] 1/26 1/225 1/225 1/252 - - - TP [mm] 9/188 1/221 133/225 117/252 117/252 117/252 125/26 3-phase TPE [mm] - 167/32 167/32 1/335 167/335 167/335 177/335 C1 [mm] 12/2 12/2 12/2 1/3 1/3 1/3 1/3 C5 [mm] 1/6 1/6 1/6 17/6 17/6 17/6 17/6 C6 [mm] 125 126 126 175 175 175 175 L1 [mm] 28 28 28 3 3 3 3 H1 [mm] 75 75/61 75 115 115 115 115 H2 [mm] 137 135/11 135 152 152 152 18 1-/3-phase TP [mm] 3/3 1/1 1/1 -/518 -/58 -/588 -/63 H3 1-/3-phase TPE [mm] 3/- 2/91 1/91 98/58 -/58 -/588 -/63 H [mm] - - - - - - - M M12 M12 M12 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 63

Technical data DN 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED -XX/2 H 9 8 7-9/2-83/2-71/2 TP, TPE Hz 6-57/2 3 -/2-3/2-36/2 2 1 2 3 6 7 Q [m³/h] 2 2 16 12 8-36/2 -/2-3/2-57/2-71/2-83/2-9/2 1 2 3 6 7 Q [m³/h] NPSH 1 12 1 8 6 2 Eta [%] 7 65 6 55 5 35 3 1 2 3 6 7 Q [m³/h] -36/2-3/2 -/2-57/2-9/2-71/2-83/2 1 2 3 6 7 Q [m³/h] 5 1 15 2 Q [l/s] 2 6 8 v [m/s] TM2 22 Note: All curves apply to single-head pumps. For further information, see page. 6

Performance curves DN 2-pole, PN 6, 1, 16 P B3 P AF H3 AE D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP -36/2-3/2 -/2-57/2-71/2-83/2-9/2 TPD TPE TPED Series 3 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - - 3-phase TP 112 132 132 16 16 16 18 1-phase TPE - - - - - - - 3-phase TPE 112 132 132 16 16 16 18 1-/3-phase TP -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 1-/3-phase TPE -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 PN PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1-/3-phase TP [mm] -/22 -/22 -/26 -/31 -/31 -/31 -/31 1-/3-phase TPE [mm] -/22 -/22 -/26 -/31 -/31 -/31 -/31 1-/3-phase TP [mm] -/13 -/13 -/159 -/2 -/2 -/2 -/2 1-/3-phase TPE [mm] -/188 -/188 -/213 -/38 -/38 -/38 -/38 AE 1-/3-phase TPE [mm] -/15 -/15 -/15 -/21 -/21 -/21 -/21 AF 1-/3-phase TPE [mm] -/15 -/15 -/15 -/21 -/21 -/21 -/21 P [mm] 2 3 3 3 3 3 3 B1 [mm] 133/29 133/29 18/386 18/386 18/386 18/386 18/386 B2 [mm] 119/28 119/28 16/379 16/379 16/379 16/379 16/379 B3 [mm] 32 32 2 2 2 2 2 1-phase TPE [mm] - - - - - - - TP [mm] 13/29 1/31 18/386 2/386 2/386 2/386 2/386 3-phase TPE [mm] 188/385 188/385 213/386 38/58 38/58 38/58 38/58 C1 [mm] 1/ 1/ 1/ 1/ 1/ 1/ 1/ C5 [mm] 17/52 17/52 22/123 22/123 22/123 22/123 22/123 C6 [mm] 175 175 175 175 175 175 175 L1 [mm] 3 3 H1 [mm] 115 115 115 115 115 115 115 H2 [mm] 189 228 23 26 26 26 26 1-/3-phase TP [mm] -/676 -/73 -/728 -/8 -/8 -/89 -/89 H3 1-/3-phase TPE [mm] -/676 -/73 -/728 -/8 -/8 -/89 -/92 H [mm] - - - 35 35 35 35 M M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 65

Technical data DN 65 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED 65-XX/2 H 28 26 2 22 2 18 16 1 12 1 8 6 2 3.5 3. 2.5 2. 1.5 1..5. -26/2-23/2-19/2-18/2-12/2-6/2 TP, TPE 65 Hz 5 1 15 2 25 3 35 5 Q [m³/h]. -26/2-6/2-19/2-12/2-23/2-18/2 5 1 15 2 25 3 35 5 Q [m³/h] NPSH 5-12/2 3 2 1-6/2-18/2-19/2, -23/2, -26/2 Eta [%] 8 75 7 65 6 55 5 35 5 1 15 2 25 3 35 5 Q [m³/h] -6/2-12/2-18/2-23/2-19/2-26/2 5 1 15 2 25 3 35 5 Q [m³/h] 2 6 8 1 12 1 Q [l/s]..5 1. 1.5 2. 2.5 3. 3.5 v [m/s] TM2 23 81 Note: All curves apply to single-head pumps. For further information, see page. 66

Performance curves DN 65 2-pole, PN 6, 1, 16 P B3 P AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP 65-6/2-12/2-18/2-19/2-23/2-26/2 TPD TPE TPED Series 2 2 2 3 3 3 IEC size 1-phase TP 8 9 9 - - - 3-phase TP 71 8 9 9 1 112 1-phase TPE 71 8 - - - - 3-phase TPE - 9 9 9 1 112 1-/3-phase TP.55/.55 1.1/1.1 1.5/1.5 -/2.2 -/3 -/ 1-/3-phase TPE.55/- 1.1/1.1 -/1.5 -/2.2 -/3 -/ PN PN 6/1 PN 6/1 PN 6/1 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] D1 [mm] 65 65 65 65 65 65 1-/3-phase TP [mm] 11/11 178/11 178/178 -/178 -/198 -/22 1-/3-phase TPE [mm] 11/- 11/178 -/178 -/178 -/198 -/22 1-/3-phase TP [mm] 133/19 139/19 139/11 -/11 -/12 -/13 1-/3-phase TPE [mm] 1/- 1/167 -/167 -/167 -/177 -/188 AE 1-/3-phase TPE [mm] 15/- 15/132 -/132 -/132 -/132 -/15 AF 1-/3-phase TPE [mm] 15/- 15/132 -/132 -/132 -/132 -/15 P [mm] - - - 2 2 2 B1 [mm] 93/195 1/225 1/225 12/298 12/298 12/298 B2 [mm] 93/21 1/225 1/225 12/29 12/29 12/29 B3 [mm] 2 2 2 32 32 32 1-phase TPE [mm] 1/225 1/225 - - - - TP [mm] 133/195 139/225 139/225 12/298 12/298 12/298 3-phase TPE [mm] - 167/32 167/32 167/36 177/366 188/385 C1 [mm] 12/2 12/2 12/2 1/ 1/ 1/ C5 [mm] 17/63 17/63 17/63 18/65 18/65 18/65 C6 [mm] 153 153 153 175 175 175 L1 [mm] 3 3 3 36 36 36 H1 [mm] 82 82 82 15 15 15 H2 [mm] 15 1 15 172 21 21 1-/3-phase TP [mm] 68/18 517/532 557/7 -/598 -/61 -/678 H3 1-/3-phase TPE [mm] 18/- 62/512 -/517 -/598 -/61 -/678 H [mm] - - - - - - M M12 M12 M12 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 67

Technical data DN 65 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED 65-XX/2 H 1 9 8 7 6 3-93/2-72/2-66/2-5/2-6/2-1/2-3/2 TP, TPE 65 Hz 2 1 2 3 6 7 8 9 Q [m³/h] 32-93/2 28 2 2-72/2-66/2 16-5/2 12-6/2 8-1/2-3/2 1 2 3 6 7 8 9 Q [m³/h] NPSH 1 8 6 2 Eta [%] 75 7 65 6 55 5 35 3 1 2 3 6 7 8 9 Q [m³/h] -1/2-93/2-3/2-72/2-5/2-66/2-6/2 1 2 3 6 7 8 9 Q [m³/h] 5 1 15 2 25 Q [l/s] 2 6 v [m/s] TM2 2 Note: All curves apply to single-head pumps. For further information, see page. 68

Performance curves DN 65 2-pole, PN 6, 1, 16 P B3 P AF H3 AE D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP 65-3/2-1/2-6/2-5/2-66/2-72/2-93/2 TPD TPE - TPED - Series 3 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - - 3-phase TP 132 132 16 16 16 18 2 1-phase TPE - - - - - - - 3-phase TPE 132 132 16 16 16 18-1-/3-phase TP -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/3 1-/3-phase TPE -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/- PN PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 65 65 65 65 65 65 65 1-/3-phase TP [mm] -/22 -/26 -/31 -/31 -/31 -/31 -/7 1-/3-phase TPE [mm] -/22 -/26 -/31 -/31 -/31 -/31 -/- 1-/3-phase TP [mm] -/13 -/159 -/2 -/2 -/2 -/2 -/315 1-/3-phase TPE [mm] -/188 -/213 -/38 -/38 -/38 -/38 -/- AE 1-/3-phase TPE [mm] -/15 -/15 -/21 -/21 -/21 -/21 - AF 1-/3-phase TPE [mm] -/15 -/15 -/21 -/21 -/21 -/21 - P [mm] 3 3 3 3 3 3 B1 [mm] 12/298 12/298 178/39 178/39 178/39 178/39 178/39 B2 [mm] 12/29 12/29 16/383 16/383 16/383 16/383 16/383 B3 [mm] 32 32 1-phase TPE [mm] - - - - - - - TP [mm] 1/31 159/31 2/395 2/395 2/395 2/395 3/21 3-phase TPE [mm] 188/385 213/396 38/558 38/558 38/558 38/558 - C1 [mm] 1/ 1/ 1/52 1/52 1/52 1/52 1/52 C5 [mm] 18/65 18/65 238/111 238/111 238/111 238/111 238/111 C6 [mm] 175 175 175 175 175 175 175 L1 [mm] 36 36 75 75 75 75 75 H1 [mm] 15 15 125 125 125 125 125 H2 [mm] 239 239 263 263 263 263 263 1-/3-phase TP [mm] -/735 -/723 -/859 -/859 -/93 -/93 -/999 H3 1-/3-phase TPE [mm] -/735 -/723 -/859 -/859 -/93 -/929 -/- H [mm] - - 35 35 35 35 35 M M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 69

Technical data DN 8 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED 8-XX/2 H 26 2 22 2 18 16 1 12 1 8 6 6 5 3 2 1-2/2-21/2-18/2-1/2-12/2 TP, TPE 8 Hz 1 2 3 6 7 8 Q [m³/h] -18/2-1/2-12/2-21/2-2/2 1 2 3 6 7 8 Q [m³/h] NPSH 1 H 75 7 TP, TPE 8 Hz -7/2 65 6-57/2 55-52/2 5 -/2 35-33/2 3-2/2 25 2 15 2 6 8 1 12 1 16Q [m³/h] 32 28 2-7/2 2-57/2 16-52/2 12 -/2 8-33/2-2/2 2 6 8 1 12 1 Q [m³/h] NPSH 1-52/2, 57/2, 7/2 8-12/2 8-2/2 6-1/2-18/2, 21/2, 2/2 6-33/2, -/2 2 2 Eta [%] 8 75 7 65 6 55 5 1 2 3 6 7 8 Q [m³/h] -21/2-12/2-2/2-18/2-1/2 1 2 3 6 7 8 Q [m³/h] Eta [%] 8 75 7 65 6 55 5 2 6 8 1 12 1 Q [m³/h] -7/2-57/2-2/2 -/2-33/2-52/2 2 6 8 1 12 1 Q [m³/h] 5 1 15 2 Q [l/s] 1 2 3 v [m/s] TM2 25 9 1 2 3 Q [l/s] 2 6 8 v [m/s] TM2 87 9 Note: All curves apply to single-head pumps. For further information, see page. 7

Performance curves DN 8 2-pole, PN 6, 1, 16 P B3 P AF H3 AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 8-12/2-1/2-18/2-21/2-2/2-2/2-33/2 -/2-52/2-57/2-7/2 TPD TPE - TPED - Series 2 3 3 3 3 3 3 3 3 3 3 IEC size 1-phase TP 9 - - - - - - - - - - 3-phase TP 9 9 1 112 132 132 16 16 16 18 2 1-phase TPE - - - - - - - - - - - 3-phase TPE 9 9 1 112 132 132 16 16 16 18-1-/3-phase TP 1.5/1.5 -/2.2 -/3 -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/3 1-/3-phase TPE -/1.5 -/2.2 -/3 -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/- PN PN 6/PN1 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 8 8 8 8 8 8 8 8 8 8 8 1-/3-phase TP [mm] 178/178 -/178 -/198 -/22 -/22 -/26 -/31 -/31 -/31 -/31 -/2 1-/3-phase TPE [mm] -/178 -/178 -/198 -/22 -/22 -/26 -/31 -/31 -/31 -/31 -/- 1-/3-phase TP [mm] 139/139 -/11 -/12 -/13 -/13 -/159 -/2 -/2 -/2 -/2 -/315 1-/3-phase TPE [mm] -/167 -/167 -/177 -/188 -/188 -/213 -/38 -/38 -/38 -/38 -/- AE 1-/3-phase TPE [mm] -/132 132 132 15 15 15 21 21 21 21 - AF 1-/3-phase TPE [mm] -/132 132 132 15 15 15 21 21 21 21 - P [mm] 135/135 2 2 2 3 3 3 3 3 3 B1 [mm] 12/13 125/296 125/296 125/296 125/296 176/366 176/366 176/366 187/16 187/16 187/16 B2 [mm] 1/225 119/29 119/29 119/29 119/29 1/35 1/35 1/35 162/5 162/5 162/5 B3 [mm] 2 3 3 3 3 7 7 7 1-phase TPE [mm] - - - - - - - - - - - TP [mm] 12/225 125/296 125/296 13/296 1/32 176/366 2/375 2/375 2/16 2/16 3/36 3-phase TPE [mm] 167/32 167/296 177/296 188/395 188/395 213/366 38/538 38/538 38/573 38/573 - C1 [mm] 16/2 1/2 1/2 1/2 1/2 1/8 1/8 1/8 1/5 1/5 1/5 C5 [mm] 18/53 18/78 18/78 18/78 18/78 22/93 22/93 22/93 2/133 2/133 2/133 C6 [mm] 173 175 175 175 175 175 175 175 3 3 3 L1 [mm] 36 36 36 36 36 H1 [mm] 97 15 15 15 15 115 115 115 115 115 115 H2 [mm] 163 176 2 2 23 23 273 273 273 273 273 1-/3-phase TP [mm] 581/581 -/62 -/6 -/681 -/739 -/737 -/859 -/859 -/93 -/93 -/999 H3 1-/3-phase TPE [mm] -/51 -/62 -/6 -/681 -/739 -/737 -/859 -/859 -/93 -/929 -/- H [mm] - - - - - - 35 35 35 35 35 M M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 71

Technical data DN 1 2-pole, PN 6, 1, 16 TP, TPD, TPE, TPED 1-XX/2 H 28 26 2 22 2 18 16 1 12 1 8 6 2-2/2-2/2-16/2-12/2 TP, TPE 1 Hz 1 2 3 6 7 8 9 1 Q [m³/h] 8-2/2 7 H 65 6 55 5 35 3 25 2 15 1 5 32 28-8/2-39/2-36/2-31/2-2/2 TP, TPE 1 Hz 2 6 8 112116182 Q [m³/h] -8/2 6 5 3 2-2/2-16/2-12/2 2 2 16 12 8-2/2-39/2-36/2-31/2 1 1 2 3 6 7 8 9 1 Q [m³/h] NPSH 12 1 8 6 2-12/2-16/2-2/2, -2/2 NPSH 2 6 8 112116182 Q [m³/h] 1-8/2 12 1 8 6 2-2/2, -31/2-36/2, -39/2 Eta [%] 8 75 7 65 6 55 5 1 2 3 6 7 8 9 1 Q [m³/h] -2/2-16/2-2/2-12/2 1 2 3 6 7 8 9 1 Q [m³/h] Eta [%] 85 8 75 7 65 6 55 5 2 6 8 112116182 Q [m³/h] -8/2-2/2-39/2-36/2-31/2 2 6 8 112116182 Q [m³/h] 5 1 15 2 25 3 Q [l/s]..5 1. 1.5 2. 2.5 3. v [m/s] TM2 26 9 1 2 3 6 Q [l/s] 1 2 3 5 6 7 v [m/s] TM2 8751 81 Note: All curves apply to single-head pumps. For further information, see page. 72

Performance curves DN 1 2-pole, PN 6, 1, 16 P B3 P H3 AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 1-12/2-16/2-2/2-2/2-2/2-31/2-36/2-39/2-8/2 TPD TPE - TPED - Series 2 3 3 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - - - - 3-phase TP 9 112 132 132 16 16 16 18 2 1-phase TPE - - - - - - - - - 3-phase TPE 9 112 132 132 16 16 16 18-1-/3-phase TP -/2.2 -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/3 1-/3-phase TPE -/2.2 -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/- PN PN 6/PN 1 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1 1 1 1 1 1 1 1 1 1-/3-phase TP [mm] -/178 -/22 -/22 -/26 -/31 -/31 -/31 -/31 -/7 1-/3-phase TPE [mm] -/178 -/22 -/22 -/26 -/31 -/31 -/31 -/31 -/- 1-/3-phase TP [mm] -/11 -/13 -/13 -/159 -/2 -/2 -/2 -/2 -/315 1-/3-phase TPE [mm] -/167 -/188 -/188 -/213 -/38 -/38 -/38 -/38 -/- AE 1-/3-phase TPE [mm] -/132 15 15 15 21 21 21 21 - AF 1-/3-phase TPE [mm] -/132 15 15 15 21 21 21 21 - P [mm] - 2 3 3 3 3 3 3 B1 [mm] 125/25 156/37 156/37 156/37 19/1 19/1 19/1 19/1 21/3 B2 [mm] 1/265 12/332 12/332 12/332 151/395 151/395 151/395 151/395 173/29 B3 [mm] 28 7 7 7 7 1-phase TPE [mm] - - - - - - - - - TP [mm] 125/265 156/36 156/385 159/385 2/25 2/25 2/25 2/25 3/51 3-phase TPE [mm] 167/3 188/37 188/3 213/3 38/1 38/1 38/1 38/1 - C1 [mm] 16/28 1/8 1/8 1/8 23/5 23/5 23/5 23/5 23/5 C5 [mm] 225/83 2/1 2/1 2/1 275/11 275/11 275/11 275/11 275/11 C6 [mm] 221 175 175 175 23 23 23 23 23 L1 [mm] 5 5 5 5 5 H1 [mm] 17 1 1 1 1 1 1 1 1 H2 [mm] 185 26 25 25 27 27 27 27 37 1-/3-phase TP [mm] -/613 -/718 -/776 -/76 -/881 -/881 -/925 -/925 -/158 H3 1-/3-phase TPE [mm] -/613 -/718 -/776 -/76 -/881 -/881 -/925 -/951 -/- H [mm] - - - - 35 35 35 35 35 M M16 M16 M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 73

Technical data DN 32 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED, -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 32-XXX/ H 6. 5.5 5..5. 3.5 3. 2.5 2. 1.5 1..5. -6/ -/ -3/ TP, TPE 32 Hz 1 2 3 5 6 7 8 9 Q [m³/h] H 13 12 11 1 9 8 7 6 5 3-12/ -1/ -8/ TP, TPE 32 Hz 1 2 3 5 6 7 8 9 1 11 Q [m³/h].12.1-6/.6.5-12/.8 -/. -1/.6-3/.3..2-8/.2.1. 1 2 3 5 6 7 8 9 Q [m³/h] NPSH -/, -6/ 3.5 3. 2.5. 1 2 3 5 6 7 8 9 1 11 Q [m³/h] NPSH 5 2. -3/ 3 1.5 1..5 2 1. Eta [%] 3 2 1 1 2 3 5 6 7 8 9 Q [m³/h] -/ -6/ -3/ Eta [%] 55 5 35 3 25 1 2 3 5 6 7 8 9 1 11 Q [m³/h] -1/ -8/ -12/ 1 2 3 5 6 7 8 9 Q [m³/h] 2 1 2 3 5 6 7 8 9 1 11 Q [m³/h]..5 1. 1.5 2. 2.5 Q [l/s]..5 1. 1.5 2. 2.5 v [m/s] TM2 27 9..5 1. 1.5 2. 2.5 3. Q [l/s]..5 1. 1.5 2. 2.5 3. v [m/s] TM2 28 Note: All curves apply to single-head pumps. For further information, see page. 7

Performance curves DN 32 -pole, PN 6, 1, 16 P B3 P AF H3 AE D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP 32-3/ -/ -6/ -8/ -1/ -12/ TPD TPE TPED Series 2 2 2 3 3 3 IEC size 1-phase TP 63 71 71 - - - 3-phase TP 63 71 71 71 71 8 1-phase TPE 71 71 71 71 71 8 3-phase TPE - - - - - 8 1-/3-phase TP.12/.12.25/.25.25/.25 -/.25 -/.37 -/.55 1-/3-phase TPE.37/-.37/-.37/-.25/-.37/-.55/.55 PN PN 6/1 PN 6/1 PN 6/1 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] D1 [mm] 32 32 32 32 32 32 1-/3-phase TP [mm] 118/118 11/11 11/11 -/11 -/11 -/11 1-/3-phase TPE [mm] 11/- 11/- 11/- 11/- 11/- 11/178 1-/3-phase TP [mm] 11/11 133/133 133/133 -/19 -/19 -/19 1-/3-phase TPE [mm] 1/- 1/- 1/- 1/- 1/- 1/167 AE 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/- 15/- 15/132 AF 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/- 15/- 15/132 P [mm] - 15/15-17 17 2 B1 [mm] 75/18 1/222 1/222 125/26 125/26 1/321 B2 [mm] 75/18 1/222 1/222 117/257 117/257 1/321 B3 [mm] 2 2 2 276 276 355 1-phase TPE [mm] 1/26 1/225 1/225 1/26 1/26 1/321 TP [mm] 11/18 1/222 1/222 125/26 125/26 1/321 3-phase TPE [mm] - - - - - 167/321 C1 [mm] 8/2 8/2 8/2 1/356 1/356 1/35 C5 [mm] 11/52 1/82 1/82 17/5 17/5 22/6 C6 [mm] 13 13 13 175 175 175 L1 [mm] 22 28 28 3 3 H1 [mm] 68 79 79 1 1 1 H2 [mm] 12 125 125 129 129 156 1-/3-phase TP [mm] 16/39 395/395 395/395 -/2 -/2 -/87 H3 1-/3-phase TPE [mm] 8/- 395/- 395/- 2/- 2/- 87/537 H [mm] - - - - - - M M12 M12 M12 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 75

Technical data DN -pole, PN 6, 1, 16 TP, TPD, TPE, TPED -XXX/ H 7 6 5 3 2 1-9/ -6/ -3/ TP, TPE Hz 2 6 8 1 12 1 Q [m³/h] H 16 15 1 13 12 11 1 9 8 7 6 5-16/ -13/ -1/ TP, TPE Hz 2 6 8 1 12 1 16 18 Q [m³/h].2.2-6/ 1.2 1. -16/.16.12.8-9/ -3/.8.6. -13/ -1/..2. 2 6 8 1 12 1 Q [m³/h] NPSH 3.5-9/ 3. 2.5 2. 1.5 1..5-3/ -6/. 2 6 8 1 12 1 16 18 Q [m³/h] NPSH 3. 2.5 2. 1.5 1..5. Eta [%] 7 65 6 55 5 2 6 8 1 12 1 Q [m³/h] -9/ -3/ -6/. Eta [%] 6 55 5 35 2 6 8 1 12 1 16 18 Q [m³/h] -1/ -13/ -16/ 35 3 2 6 8 1 12 1 Q [m³/h] 2 6 8 1 12 1 16 18 Q [m³/h] 1 2 3 Q [l/s]..5 1. 1.5 2. 2.5 3. v [m/s] TM2 29 9 1 2 3 5 Q [l/s] 1 2 3 v [m/s] TM2 3 81 Note: All curves apply to single-head pumps. For further information, see page. 76

Performance curves DN -pole, PN 6, 1, 16 P B3 P AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP -3/ -6/ -9/ -1/ -13/ -16/ TPD - TPE TPED - Series 2 2 2 3 3 3 IEC size 1-phase TP 63 71 71 - - - 3-phase TP 63 71 71 8 8 9 1-phase TPE 71 71 71 8 8-3-phase TPE - - - 9 9 9 1-/3-phase TP.12/.12.25/.25.25/.25 -/.55 -/.75 -/1.1 1-/3-phase TPE.37/-.37/-.37/-.55/.55.75/.75 -/1.1 PN PN 6/1 PN 6/1 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] D1 [mm] 1-/3-phase TP [mm] 118/118 11/11 11/11 -/11 -/178 -/178 1-/3-phase TPE [mm] 11/- 11/- 11/- 11/178 11/178 -/178 1-/3-phase TP [mm] 11/11 133/19 133/133 -/19 -/11 -/11 1-/3-phase TPE [mm] 1/- 1/- 1/- 1/167 1/167 -/167 AE 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/132 15/132 -/132 AF 1-/3-phase TPE [mm] 15/- 15/- 15/- 15/132 15/132 -/132 P [mm] - - 15 2 2 2 B1 [mm] 85/18 1/- 1/222 13/273 19/325 19/325 B2 [mm] 75/18 1/- 1/222 117/267 1/321 1/321 B3 [mm] 2-2 29 355 355 1-phase TPE [mm] 1/26 1/225 1/225 1/273 19/325 - TP [mm] 11/18 133/- 1/222 13/273 19/325 19/325 3-phase TPE [mm] - - - 167/277 167/325 167/325 C1 [mm] 12/2 12/- 12/2 1/ 1/35 1/35 C5 [mm] 125/5 125/- 16/95 17/5 22/18 22/18 C6 [mm] 125-125 175 175 175 L1 [mm] 2 2 32 3 H1 [mm] 67 75 68/79 1 11 11 H2 [mm] 16 123 128 166 158 158 1-/3-phase TP [mm] 19/393 389/389 388/398 -/97 -/59 -/589 H3 1-/3-phase TPE [mm] 11/- 389/- 388/- 7/57 99/59 -/59 H [mm] - - - - - - M M12 M12 M12 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 77

Technical data DN -pole, PN 6, 1, 16 TP, TPD, TPE, TPED -XXX/ H 11 1 9 8 7-11/ -9/ TP, TPE Hz H 2 22 2 18-23/ -19/ TP, TPE Hz 6 5 3 2 1-6/ -3/ 16 1 12 1 8-16/ -13/ 2 6 8 1 12 1 16 18 2 22 Q [m³/h].7-11/.6.5..3.2.1. -3/ -9/ -6/ 2 6 8 1 12 1 16 18 2 22 Q [m³/h] NPSH 3.5 6 8 12 16 2 2 28 32 Q [m³/h] 3.2 2.8 2. 2. 1.6 1.2.8.. -13/ -16/ -23/ -19/ 8 12 16 2 2 28 32 Q [m³/h] NPSH 3.5 3. 2.5-6/ 3. 2.5 2. 2. 1.5 1..5-3/ -9/, -11/ 1.5 1..5. Eta [%] 75 7 65 6 55 5 35 3 2 6 8 1 12 1 16 18 2 22 Q [m³/h] -11/ -3/ -9/ -6/ 2 6 8 1 12 1 16 18 2 22 Q [m³/h]. Eta [%] 65 6 55 5 35 3 8 12 16 2 2 28 32 Q [m³/h] -13/ -16/ -19/ -23/ 8 12 16 2 2 28 32 Q [m³/h] 1 2 3 5 6 Q [l/s]..5 1. 1.5 2. 2.5 v [m/s] TM2 31 81 2 6 8 1 Q [l/s] 1 2 3 v [m/s] TM2 32 Note: All curves apply to single-head pumps. For further information, see page. 78

Performance curves DN -pole, PN 6, 1, 16 P B3 P AF H3 AE D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP -3/ -6/ -9/ -11/ -13/ -16/ -19/ -23/ TPD TPE TPED Series 2 2 3 3 3 3 3 3 IEC size 1-phase TP 71 8 - - - - - - 3-phase TP 71 71 8 8 9 9 1 1 1-phase TPE 71 71 8 8 - - - - 3-phase TPE - - 9 9 9 9 9 9 1-/3-phase TP.25/.25.37/.37 -/.55 -/.75 -/1.1 -/1.5 -/2.2 -/3 1-/3-phase TPE.37/-.37/-.55/.55.75/.75 -/1.1 -/1.5 -/2.2 -/3 PN PN 6/1 PN 6/1 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1-/3-phase TP [mm] 11/12 11/11 -/11 -/178 -/178 -/178 -/198 -/198 1-/3-phase TPE [mm] 11/- 11/- 11/178 11/178 -/178 -/178 -/198 -/198 1-/3-phase TP [mm] 133/133 133/19 -/19 -/11 -/11 -/11 -/12 -/12 1-/3-phase TPE [mm] 1/- 1/- 1/167 1/167 -/167 -/167 -/177 -/177 AE 1-/3-phase TPE [mm] 15/- 15/- 15/132 15/132 -/132 -/132 -/132 -/132 AF 1-/3-phase TPE [mm] 15/- 15/- 15/132 15/132 -/132 -/132 -/132 -/132 P [mm] - - 2 2 2 2 2 2 B1 [mm] 75/181 11/225 133/29 18/386 18/386 18/386 18/386 18/386 B2 [mm] 9/186 1/225 119/28 16/379 16/379 16/379 16/379 16/379 B3 [mm] 2 2 32 2 2 2 2 2 1-phase TPE [mm] 1/26 1/225 1/29 18/386 - - - - TP [mm] 133/186 133/225 133/29 18/386 18/386 18/386 18/386 18/386 3-phase TPE [mm] - - 167/29 18/386 18/386 18/386 18/386 18/386 C1 [mm] 12/2 12/2 1/ 1/ 1/ 1/ 1/ 1/ C5 [mm] 1/6 1/6 17/52 22/123 22/123 22/123 22/123 22/123 C6 [mm] 125 125 175 175 175 175 175 175 L1 [mm] 28 28 3 H1 [mm] 82/9 82 115 115 115 115 115 115 H2 [mm] 135 127 161 167 167 167 195 195 1-/3-phase TP [mm] 8/16 52/ -/7 -/553 -/63 -/63 -/65 -/65 H3 1-/3-phase TPE [mm] 8/- /- 7/557 513/563 -/563 -/63 -/65 -/65 H [mm] - - - - - - - - M M12 M12 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 79

Technical data DN 65 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 65-XXX/ H 12 11 1 9 8 7 6 5 3 2 1 1.2 1..8.6..2. -11/ -9/ -6/ -3/ TP, TPE 65 Hz 8 12 16 2 2 28 32 36Q [m³/h] -9/ -3/ -11/ -6/ 8 12 16 2 2 28 32 36Q [m³/h] NPSH 2.5-3/ H 26 2 22 2 18 16 1 12 1 8 6 3.5 3. 2.5 2. 1.5 1..5. -2/ -17/ -1/ -13/ TP, TPE 65 Hz 5 1 15 2 25 3 35 5 Q [m³/h]. -2/ -13/ -17/ -1/ 5 1 15 2 25 3 35 5 Q [m³/h] NPSH 2.5 2. -6/ 2. 1.5 1.5 1..5-9/, -11/ 1..5. Eta [%] 8 75 7 65 6 55 5 8 12 16 2 2 28 32 36Q [m³/h] -3/ -9/ -11/ -6/ 8 12 16 2 2 28 32 36Q [m³/h]. Eta [%] 7 65 6 55 5 35 5 1 15 2 25 3 35 5 Q [m³/h] -2/ -17/ -13/ -1/ 5 1 15 2 25 3 35 5 Q [m³/h] 2 6 8 1 Q [l/s]..5 1. 1.5 2. 2.5 v [m/s] TM2 33 81 2 6 8 1 12 1 Q [l/s] 1 2 3 v [m/s] TM2 3 Note: All curves apply to single-head pumps. For further information, see page. 8

Performance curves DN 65 -pole, PN 6, 1, 16 P B3 P AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H1 H2 H C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM2 8632 - TM2 8631 Technical data TP 65-3/ -6/ -9/ -11/ -13/ -1/ -17/ -2/ TPD TPE TPED Series 2 2 3 3 3 3 3 3 IEC size 1-phase TP 71 8 - - - - - - 3-phase TP 71 8 8 9 9 1 1 112 1-phase TPE 71 8 8 - - - - - 3-phase TPE - 9 9 9 9 1 1 112 1-/3-phase TP.25/.25.55/.55 -/.75 -/1.1 -/1.5 -/2.2 -/3 -/ 1-/3-phase TPE.37/-.55/.55.75/.75 -/1.1 -/1.5 -/2.2 -/3 -/ PN PN 6/1 PN 6/1 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 65 65 65 65 65 65 65 65 1-/3-phase TP [mm] 11/11 11/11 -/178 -/178 -/178 -/198 -/198 -/22 1-/3-phase TPE [mm] 11/- 11/178 11/178 -/178 -/178 -/198 -/198 -/22 1-/3-phase TP [mm] 133/19 133/19 -/11 -/11 -/11 -/12 -/12 -/13 1-/3-phase TPE [mm] 1/- 1/167 1/167 -/167 -/167 -/177 -/177 -/188 AE 1-/3-phase TPE [mm] 15/- 15/132 15/15 -/132 -/132 -/132 -/132 -/15 AF 1-/3-phase TPE [mm] 15/- 15/132 15/15 -/132 -/132 -/132 -/132 -/15 P [mm] - - 2 2 2 2 2 2 B1 [mm] 125/23 125/23 12/298 178/39 178/39 178/39 178/39 178/39 B2 [mm] 1/2 1/2 12/29 16/383 16/383 16/ 16/383 16/383 B3 [mm] 2 2 32 1-phase TPE [mm] 1/2 1/2 12/298 - - - - - TP [mm] 133/2 133/2 12/298 178/383 178/383 178/39 178/383 178/383 3-phase TPE [mm] - 167/32 167/36 178/383 178/383 178/383 178/383 188/365 C1 [mm] 16/2 16/2 1/ 1/52 1/52 1/52 1/52 1/52 C5 [mm] 17/63 17/63 18/65 238/111 238/111 238/111 238/111 238/111 C6 [mm] 153 153 175 175 175 175 175 175 L1 [mm] 3 3 36 75 75 75 75 75 H1 [mm] 97 97 15 125 125 125 125 125 H2 [mm] 135 17 172 166 166 19 19 19 1-/3-phase TP [mm] 23/23 75/75 -/558 -/612 -/612 -/65 -/65 -/691 H3 1-/3-phase TPE [mm] 23/- 75/525 8/558 -/572 -/612 -/65 -/65 -/691 H [mm] - - - - - - - - M M16 M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 81

Technical data DN 8 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 8-XXX/ H 12 11 1 9 8 7 6 5 3 2 1 2. 1.6 1.2.8.. -11/ -9/ -7/ -6/ -3/ TP, TPE 8 Hz 1 2 3 6 7 Q [m³/h] -6/ -3/ -9/ -7/ -11/ 1 2 3 6 7 Q [m³/h] NPSH 5-3/ H 36 3 32 3 28 26 2 22 2 18 16 1 12 1 12 1 8 6 2-3/ -27/ -2/ -17/ -1/ TP, TPE 8 Hz 1 2 3 6 7 8 9 1 Q [m³/h] -2/ -17/ -1/ -27/ -3/ 1 2 3 6 7 8 9 1 Q [m³/h] NPSH 5-27/, 3/ 3 2 1-6/ -7/ 9/, -11/ 3 2 1-1/, 17/ -2/ Eta [%] 8 75 7 65 6 55 5 1 2 3 6 7 Q [m³/h] -6/ -9/ -11/ -7/ -3/ Eta [%] 75 7 65 6 55 5 1 2 3 6 7 8 9 1 Q [m³/h] -17/ -1/ -3/ -27/ -2/ 1 2 3 6 7 Q [m³/h] 1 2 3 6 7 8 9 1 Q [m³/h] 8 12 16 2 Q [l/s] 1 2 3 v [m/s] TM2 81 8 12 16 2 2 28 Q [l/s] 1 2 3 5 6 v [m/s] TM2 8752 81 Note: All curves apply to single-head pumps. For further information, see page. 82

Performance curves DN 8 -pole, PN 6, 1, 16 P B3 P AF H3 AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 8-3/ -6/ -7/ -9/ -11/ -1/ -17/ -2/ -27/ -3/ TPD TPE TPED Series 2 2 3 3 3 3 3 3 3 3 IEC size 1-phase TP 8 9 - - - - - - - - 3-phase TP 71 8 9 9 1 1 112 132 132 16 1-phase TPE 71 8 - - - - - - - - 3-phase TPE - 9 9 9 1 112 112 132 132 16 1-/3-phase TP.37/.37.75/.75 -/1.1 -/1.5 -/2.2 -/3 -/ -/5.5 -/7.5 -/11 1-/3-phase TPE.37/-.75/.75 -/1.1 -/1.5 -/2.2 -/3 -/ -/5.5 -/7.5 -/11 PN PN 6/PN 1 PN 6/PN 1 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 8 8 8 8 8 8 8 8 8 8 1-/3-phase TP [mm] 12/11 178/178 -/178 -/178 -/198 -/198 -/22 -/26 -/26 -/31 1-/3-phase TPE [mm] 11/- 11/178 -/178 -/178 -/198 -/198 -/22 -/26 -/26 -/31 1-/3-phase TP [mm] 133/19 139/11 -/11 -/11 -/12 -/12 -/13 -/159 -/159 -/2 1-/3-phase TPE [mm] 1/- 1/167 -/167 -/167 -/177 -/177 -/188 -/213 -/213 -/38 AE 1-/3-phase TPE [mm] 15/- 15/132 132 132 132 132 15 15 15 21 AF 1-/3-phase TPE [mm] 15/- 15/132 132 132 132 132 15 15 15 21 P [mm] - - 2 2 2 2 2 3 3 3 B1 [mm] 13/23 135/2 176/366 176/366 176/366 187/16 187/16 23/91 23/91 23/91 B2 [mm] 1/2 1/2 1/35 1/35 1/35 162/5 162/5 226/8 226/8 226/8 B3 [mm] 2 2 7 7 1-phase TPE [mm] 1/2 1/2 - - - - - - - - TP [mm] 133/23 139/2 176/366 176/366 176/366 187/16 187/16 23/91 23/91 23/91 3-phase TPE [mm] - 167/32 176/366 176/366 177/366 187/16 188/16 23/91 23/91 38/91 C1 [mm] 16/2 16/2 1/8 1/8 1/8 1/5 1/5 23/5 23/5 23/5 C5 [mm] 18/53 18/53 22/93 22/93 22/93 2/133 2/133 31/15 31/15 31/15 C6 [mm] 173 173 175 175 175 175 175 3 3 3 L1 [mm] 36 36 62 62 62 H1 [mm] 17 17 115 115 115 115 115 1 1 1 H2 [mm] 163 153 176 176 2 2 2 273 273 33 1-/3-phase TP [mm] 513/61 551/51 -/612 -/612 -/65 -/65 -/691 -/792 -/82 -/91 H3 1-/3-phase TPE [mm] 61/- 91/51 -/572 -/612 -/65 -/65 -/691 -/792 -/872 -/91 H [mm] - - - - - - - - - 35 M M16 M16 M16 M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 83

Technical data DN 1 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 1-XXX/ H 2 18 16 1 12 1 8 6 2 5-17/ -13/ -11/ -9/ -7/ -6/ -3/ TP, TPE 1 Hz 2 6 8 1 Q [m³/h] 6-17/ -13/ 3-11/ 2-9/ 1-7/ -6/ -3/ 2 6 8 1 Q [m³/h] NPSH 1-3/ 8 6 2 Eta [%] 8 75 7 65 6 55 5-13/, -17/ -6/ -9/, -11/ -7/ 2 6 8 1 Q [m³/h] -17/ -6/ -11/ -3/ -13/ -7/ -9/ 2 6 8 1 Q [m³/h] 1 2 3 Q [l/s] 1 2 3 v [m/s] TM2 5 9 Note: All curves apply to single-head pumps. For further information, see page. 8

Performance curves DN 1 -pole, PN 6, 1, 16 P B3 P H3 AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 1-3/ -6/ -7/ -9/ -11/ -13/ -17/ TPD TPE TPED Series 2 2 3 3 3 3 3 IEC size 1-phase TP 8 9 - - - - - 3-phase TP 8 9 9 1 1 112 132 1-phase TPE 8 - - - - - - 3-phase TPE 9 9 9 1 112 112 132 1-/3-phase TP.55/.55 1.1/1.1 -/1.5 -/2.2 -/3 -/ -/5.5 1-/3-phase TPE.55/.55 -/1.1 -/1.5 -/2.2 -/3 -/ -/5.5 PN PN 6/PN 1 PN 6/PN 1 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;1] [-25;1] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1 1 1 1 1 1 1 1-/3-phase TP [mm] 11/11 178/178 -/178 -/198 -/198 -/22 -/26 1-/3-phase TPE [mm] 11/178 -/178 -/178 -/198 -/198 -/22 -/26 1-/3-phase TP [mm] 133/19 139/11 -/11 -/12 -/12 -/13 -/159 1-/3-phase TPE [mm] 1/167 -/167 -/167 -/177 -/177 -/188 -/213 AE 1-/3-phase TPE [mm] 15/132 -/132 132 132 132 15 15 AF 1-/3-phase TPE [mm] 15/132 -/132 132 132 132 15 15 P [mm] - - 2 2 2 2 3 B1 [mm] 175/28 175/28 19/1 19/1 19/1 21/3 21/3 B2 [mm] 125/35 125/35 151/395 151/395 151/395 173/29 173/29 B3 [mm] 28 28 7 7 7 1-phase TPE [mm] 175/35 - - - - - - TP [mm] 175/28 175/28 19/1 19/1 19/1 21/3 21/3 3-phase TPE [mm] 175/3 175/3 19/1 19/1 19/1 21/3 213/3 C1 [mm] 2/28 2/28 23/5 23/5 23/5 23/5 23/5 C5 [mm] 225/83 225/83 2/11 275/11 275/11 275/11 275/11 C6 [mm] 221 221 23 23 23 23 23 L1 [mm] 5 5 5 5 5 H1 [mm] 122 122 1 1 1 1 1 H2 [mm] 172 182 173 21 21 261 277 1-/3-phase TP [mm] 525/525 625/625 -/63 -/676 -/676 -/773 -/796 H3 1-/3-phase TPE [mm] 525/575 -/585 -/63 -/676 -/676 -/773 -/796 H [mm] - - - - - - - M M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 85

Technical data DN 1 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 1-XXX/ H 36 32 28 2 2-1/ -37/ -33/ -2/ -2/ TP, TPE 1 Hz 16 12 2 2 16 12 8 2 6 8 1 12 1 16 18 Q [m³/h] -2/ -2/ -1/ -37/ -33/ 2 6 8 1 12 1 16 18 Q [m³/h] NPSH 1 8 6-33/, -37/, -1/ 2 Eta [%] 8 75 7 65 6 55 5-2/, -2/ 2 6 8 1 12 1 16 18 Q [m³/h] -1/ -2/ -33/ -2/ -37/ 2 6 8 1 12 1 16 18 Q [m³/h] 1 2 3 Q [l/s] 1 2 3 5 6 v [m/s] TM2 8753 81 Note: All curves apply to single-head pumps. For further information, see page. 86

Performance curves DN 1 -pole, PN 6, 1, 16 P B3 P AF H3 AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 1-2/ -2/ -33/ -37/ -1/ TPD TPE - TPED - Series 3 3 3 3 3 IEC size 1-phase TP - - - - - 3-phase TP 132 16 16 18 18 1-phase TPE - - - - - 3-phase TPE 132 16 16 18-1-/3-phase TP -/7.5 -/11 -/15 -/18.5 -/22 1-/3-phase TPE -/7.5 -/11 -/15 -/18.5 - PN PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1 1 1 1 1 1-/3-phase TP [mm] -/26 -/31 -/31 -/363 -/363 1-/3-phase TPE [mm] -/26 -/31 -/31 -/31-1-/3-phase TP [mm] -/159 -/2 -/2 -/262 -/262 1-/3-phase TPE [mm] -/213 -/38 -/38 -/38 - AE 1-/3-phase TPE [mm] 15 21 21 21 - AF 1-/3-phase TPE [mm] 15 21 21 21 - P [mm] 3 3 3 3 3 B1 [mm] 29/579 29/579 29/579 29/579 29/579 B2 [mm] 29/561 29/561 29/561 29/561 29/561 B3 [mm] 6 6 6 6 6 1-phase TPE [mm] - - - - - TP [mm] 29/579 29/579 29/579 29/579 29/579 3-phase TPE [mm] 29/579 38/579 38/579 38/579 - C1 [mm] 23/68 23/68 23/68 23/68 23/68 C5 [mm] 335/11 335/11 335/11 335/11 335/11 C6 [mm] 3 3 3 3 3 L1 [mm] 67 67 67 67 67 H1 [mm] 175 175 175 175 175 H2 [mm] 25 38 38 38 38 1-/3-phase TP [mm] -/858 -/95 -/128 -/12 -/193 H3 1-/3-phase TPE [mm] -/888 -/95 -/998 -/12 - H [mm] - 35 35 35 35 M M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 87

Technical data DN 125 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 125-XXX/ H 16 15 1-16/ TP, TPE 125 Hz H -2/ TP, TPE 125 Hz 13 12 11 1-13/ -11/ 36 32 28-36/ -32/ -2/ 9 8 7 6 2 2 16-21/ 5 2 6 8 1 12 1 16 Q [m³/h] 8-16/ 7 6 5 3 2-11/ -13/ 12 28 2 2 16 12 8 8 12 16 2 Q [m³/h] -2/ -21/ -32/ -2/ -36/ 1 2 6 8 1 12 1 16 Q [m³/h] NPSH 5 8 12 16 2 Q [m³/h] NPSH 6-32/, -36/, -2/ 3 2 1-11/, -13/, 16/ 5 3 2 1-21/, -2/ Eta [%] 8 75 7 65 6 55 5 2 6 8 1 12 1 16 Q [m³/h] -13/ -11/ -16/ 2 6 8 1 12 1 16 Q [m³/h] Eta [%] 75 7 65 6 55 5 8 12 16 2 Q [m³/h] -21/ -36/ -2/ -32/ -2/ 8 12 16 2 Q [m³/h] 1 2 3 Q [l/s]..5 1. 1.5 2. 2.5 3. 3.5 v [m/s] TM2 8755 81 1 2 3 6 Q [l/s] 1 2 3 5 v [m/s] TM2 8756 9 Note: All curves apply to single-head pumps. For further information, see page. 88

Performance curves DN 125 -pole, PN 6, 1, 16 P B3 P H3 AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 125-11/ -13/ -16/ -21/ -2/ -32/ -36/ -2/ TPD TPE - - TPED - - Series 3 3 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - - - 3-phase TP 112 132 132 16 16 18 18 2 1-phase TPE - - - - - - - - 3-phase TPE 112 132 132 16 16 18 - - 1-/3-phase TP -/ -/5.5 -/7.5 -/11 -/15 -/18.5 -/22 -/3 1-/3-phase TPE -/ -/5.5 -/7.5 -/11 -/15 -/18.5 - -/- PN PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 125 125 125 125 125 125 125 125 1-/3-phase TP [mm] -/22 -/26 -/26 -/31 -/31 -/363 -/363 -/2 1-/3-phase TPE [mm] -/22 -/26 -/26 -/31 -/31 -/31 - -/- 1-/3-phase TP [mm] -/13 -/159 -/159 -/2 -/2 -/262 -/262 -/3 1-/3-phase TPE [mm] -/188 -/213 -/213 -/38 -/38 -/38 - -/- AE 1-/3-phase TPE [mm] 15 15 15 21 21 21 - - AF 1-/3-phase TPE [mm] 15 15 15 21 21 21 - - P [mm] 2 3 3 3 3 3 3 B1 [mm] 2/537 2/537 2/537 271/566 271/566 271/566 271/566 271/566 B2 [mm] 22/518 22/518 22/518 23/552 23/552 23/552 23/552 23/552 B3 [mm] 6 6 6 6 6 6 6 6 1-phase TPE [mm] - - - - - - - - TP [mm] 2/537 2/537 2/537 271/566 271/566 271/566 271/566 3/566 3-phase TPE [mm] 2/537 2/537 2/537 38/566 38/566 38/566 - - C1 [mm] 23/68 23/68 23/68 23/68 23/68 23/68 23/68 23/68 C5 [mm] 31/8 31/8 31/8 /175 /175 /175 /175 /175 C6 [mm] 3 3 3 3 3 3 3 3 L1 [mm] 62 62 62 8 8 8 8 8 H1 [mm] 215 215 215 215 215 215 215 215 H2 [mm] 267 283 283 318 318 318 318 318 1-/3-phase TP [mm] -/85 -/877 -/927 -/1 -/178 -/192 -/113 -/12 H3 1-/3-phase TPE [mm] -/85 -/877 -/969 -/1 -/18 -/17 -/- -/- H [mm] - - - 35 35 35 35 35 M M16 M16 M16 M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 89

Technical data DN 1 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 1-XXX/ H 26 2 22 2 18 16 1 12 1 8 6 2 2 16 12 8-2/ -22/ -2/ -16/ -13/ TP, TPE 1 Hz 8 12 16 2 2 28 32 Q [m³/h] -13/ -2/ -16/ -22/ -2/ 8 12 16 2 2 28 32 Q [m³/h] NPSH 6 5 3 2-13/, -16/, -2/, -22/, -2/ 1 Eta [%] 85 8 75 7 65 6 55 5 8 12 16 2 2 28 32 Q [m³/h] -2/ -16/ -2/ -13/ -22/ 8 12 16 2 2 28 32 Q [m³/h] 2 6 8 1 Q [l/s] 1 2 3 5 v [m/s] TM2 875 81 Note: All curves apply to single-head pumps. For further information, see page. 9

Performance curves DN 1 -pole, PN 6, 1, 16 P B3 P AF H3 AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 1-13/ -16/ -2/ -22/ -2/ TPD TPE - TPED - Series 3 3 3 3 3 IEC size 1-phase TP - - - - - 3-phase TP 132 16 16 18 18 1-phase TPE - - - - - 3-phase TPE 132 16 16 18-1-/3-phase TP -/7.5 -/11 -/15 -/18.5 -/22 1-/3-phase TPE -/7.5 -/11 -/15 -/18.5 - PN PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1 1 1 1 1 1-/3-phase TP [mm] -/267 -/31 -/31 -/363 -/363 1-/3-phase TPE [mm] -/26 -/31 -/31 -/31-1-/3-phase TP [mm] -/167 -/2 -/2 -/262 -/262 1-/3-phase TPE [mm] -/213 -/38 -/38 -/38 - AE 1-/3-phase TPE [mm] 15 21 21 21 - AF 1-/3-phase TPE [mm] 15 21 21 21 - P [mm] 3 3 3 3 3 B1 [mm] 296/583 296/583 296/583 296/583 296/583 B2 [mm] 237/553 237/553 237/553 237/553 237/553 B3 [mm] 6 6 6 6 6 1-phase TPE [mm] - - - - - TP [mm] 296/583 296/583 296/583 296/583 296/583 3-phase TPE [mm] 296/583 38/583 38/583 38/583 - C1 [mm] 23/68 23/68 23/68 23/68 23/68 C5 [mm] /153 /153 /153 /153 /153 C6 [mm] 3 3 3 3 3 L1 [mm] 8 8 8 8 8 H1 [mm] 215 215 215 215 215 H2 [mm] 291 321 321 321 321 1-/3-phase TP [mm] -/917 -/18 -/182 -/196 -/117 H3 1-/3-phase TPE [mm] -/966 -/18 -/152 -/178 -/- H [mm] - 35 35 35 35 M M16 M16 M16 M16 M16 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 91

Technical data DN 1 -pole, PN 6, 1, 16 TP, TPD, TPE, TPED 1-XXX/ H 2 38 36 3 32 3 28 26 2 22 2 18 16 1 35 3 25 2 15 1 5-39/ -3/ -28/ -26/ TP, TPE 1 Hz 8 12 16 2 2 28 32 Q [m³/h] -28/ -26/ -39/ -3/ 8 12 16 2 2 28 32 Q [m³/h] NPSH 1 8 6-26/ 2 Eta [%] 85 8 75 7 65 6 55 5-28/, -3/, 39/ 8 12 16 2 2 28 32 Q [m³/h] -39/ -26/ -28/ -3/ 8 12 16 2 2 28 32 Q [m³/h] 2 6 8 1 Q [l/s] 1 2 3 5 v [m/s] TM3 58 26 Note: All curves apply to single-head pumps. For further information, see page. 92

Performance curves DN 1 -pole, PN 6, 1, 16 TM3 8623 8 Technical data TP 1-26/ -28/ -3/ -39/ TPD - - - - TPE - - - TPED - - - - Series 3 3 3 3 IEC size 1-phase TP - - - - 3-phase TP 18 18 2 225 1-phase TPE - - - - 3-phase TPE 18 - - - 1-/3-phase TP -/18.5 -/22 -/3 -/37 1-/3-phase TPE -/18.5 -/- -/- -/- PN PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1 1 1 1 1-/3-phase TP [mm] -/363 -/363 -/2 -/2 1-/3-phase TPE [mm] -/31 -/ - -/- -/- 1-/3-phase TP [mm] -/262 -/262 -/3 -/325 1-/3-phase TPE [mm] -/38 -/ - -/- -/- AE 1-/3-phase TPE [mm] 21 - - - AF 1-/3-phase TPE [mm] 21 - - - P [mm] 3 3 B1 [mm] 335/- 335/- 335/- 335/- B2 [mm] 288/- 288/- 288/- 288/- 1-phase TPE [mm] - - - - TP [mm] 335/- 335/- 335/- 335/- 3-phase TPE [mm] 335/- -/- -/- -/- L1 [mm] 8 8 8 8 H1 [mm] 235 235 235 235 H2 [mm] 319 319 319 39 H3 1-/3-phase TP [mm] -/1113 -/116 -/1221 -/1233 1-/3-phase TPE [mm] -/195 -/ - -/- -/- TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 93

Technical data DN 2 -pole, PN 6, 1, 16 TP 2-XXX/ H 36 32 28 2 2 16 12-1/ -32/ -27/ -2/ -22/ -18/ TP, TPE 2 Hz 8 1 2 3 6 7 Q [m³/h] 8 7 6 3 2 1-18/ -2/ -22/ -27/ -1/ -32/ 1 2 3 6 7 Q [m³/h] NPSH 1 8 6 2-18/, -22/, -2/ -27/, 32/, -1/ Eta [%] 85 8 75 7 65 6 55 5 1 2 3 6 7 Q [m³/h] -1/ -32/ -18/ -27/ -22/ -2/ 1 2 3 6 7 Q [m³/h] 1 1 2 Q [l/s] 1 2 3 5 6 v [m/s] TM3 6 26 9

Performance curves DN 2 -pole, PN 6, 1, 16 TM3 8621 8 Technical data TP 2-18/ -22/ -2/ -27/ -32/ -1/ TPD - - - - - - TPE - - - - - - TPED - - - - - - Series 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - 3-phase TP 18 2 225 225 2 28 1-phase TPE - - - - - - 3-phase TPE - - - - - - 1-/3-phase TP -/22 -/3 -/37 -/5 -/55 -/75 1-/3-phase TPE -/- -/- -/- -/- -/- -/- PN PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 2 2 2 2 2 2 1-/3-phase TP [mm] -/363 -/2 -/2 -/2 -/95 -/555 1-/3-phase TPE [mm] -/ - -/- -/- -/- -/- -/- 1-/3-phase TP [mm] -/262 -/3 -/325 -/325 -/392 -/32 1-/3-phase TPE [mm] -/ - -/- -/- -/- -/- -/- AE 1-/3-phase TPE [mm] - - - - - - AF 1-/3-phase TPE [mm] - - - - - - P [mm] 3 5 5 B1 [mm] 393/- 393/- 393/- 393/- 393/- 393/- B2 [mm] 328/- 328/- 328/- 328/- 328/- 328/- 1-phase TPE [mm] - - - - - - TP [mm] 393/- 393/- 393/- 393/- 393/- 32/- 3-phase TPE [mm] -/- -/- -/- -/- -/- -/- L1 [mm] 9 9 9 9 9 9 H1 [mm] 295 295 295 295 295 295 H2 [mm] 37 37 377 377 377 377 H3 1-/3-phase TP [mm] -/1252 -/139 -/1321 -/1381 -/189 -/192 1-/3-phase TPE [mm] -/ - -/- -/- -/- -/- -/- TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 95

Technical data DN 2 -pole, PN 16 TP 2-XXX/ H 75 7 65 6 55 5 35 3 25 2 12 1 8 6 2-66/ -59/ -53/ -7/ -/ -36/ -33/ TP, TPE 2 Hz 1 2 3 6 7 Q [m³/h] 1-66/ -36/ -33/ -/ -7/ -53/ -59/ 1 2 3 6 7 Q [m³/h] NPSH 1-7/, -53/, -59/, -66/ 12 1 8 6 2 Eta [%] 85 8 75 7 65 6 55 5-33/, -36/, -/ 1 2 3 6 7 Q [m³/h] -33/ -36/ -/ -7/ -53/ -66/ -59/ 1 2 3 6 7 Q [m³/h] 1 1 2 Q [l/s] 1 2 3 5 6 v [m/s] TM3 651 27 96

Performance curves DN 2 -pole, PN 16 TM3 8622 8 Technical data TP 2-33/ -36/ -/ -7/ -53/ -59/ -66/ TPD - - - - - - - TPE - - - - - - - TPED - - - - - - - Series 3 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - - 3-phase TP 225 225 2 28 28 315 315 1-phase TPE - - - - - - - 3-phase TPE - - - - - - - 1-/3-phase TP -/37 -/5 -/55 -/75 -/9 -/11 -/132 1-/3-phase TPE -/- -/- -/- -/- -/- -/- -/- PN PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 2 2 2 2 2 2 2 1-/3-phase TP [mm] -/2 -/2 -/95 -/555 -/555 -/61 -/61 1-/3-phase TPE [mm] -/- -/- -/- -/- -/- -/- -/- 1-/3-phase TP [mm] -/325 -/325 -/392 -/32 -/32 -/95 -/95 1-/3-phase TPE [mm] -/- -/- -/- -/- -/- -/- -/- AE 1-/3-phase TPE [mm] - - - - - - - AF 1-/3-phase TPE [mm] - - - - - - - P [mm] 5 5 5 66 66 B1 [mm] 23/- 23/- 23/- 23/- 23/- 23/- 23/- B2 [mm] 368/- 368/- 368/- 368/- 368/- 368/- 368/- 1-phase TPE [mm] - - - - - - - TP [mm] 23/- 23/- 23/- 32/- 32/- 95/- 95/- 3-phase TPE [mm] -/- -/- -/- -/- -/- -/- -/- L1 [mm] 1 1 1 1 1 1 1 H1 [mm] 295 295 295 295 295 295 295 H2 [mm] 382 382 382 382 382 12 12 H3 1-/3-phase TP [mm] -/1326 -/1386 -/19 -/197 -/167 -/1639 -/1799 1-/3-phase TPE [mm] -/- -/- -/- -/- -/- -/- -/- TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 97

Technical data DN 2 -pole, PN 1 TP 2-XXX/ H 36-39/ TP 2 Hz 32-31/ 28 2-28/ 2 16 12 7 1 2 3 6 7 8 Q [m³/h] 6-28/ -31/ -39/ 3 2 NPSH 1 2 3 6 7 8 Q [m³/h] 8 7 6 5 3 2 Eta [%] 85 8 75 7 65 6 55 5 1 2 3 6 7 8 Q [m³/h] -39/ -28/ -31/ 1 2 3 6 7 8 Q [m³/h] 1 1 2 2 Q [l/s] 1 2 3 5 v [m/s] TM2 6816 98

Performance curves DN 2 -pole, PN 1 P H3 D1D Rp 3/8 L3 L1 H1 H2 L2 D1S C2 C8 Rp 3/8 C8 C7 ø B8 B9 B1 B2 B7 TM2 839 Technical data TP 2-28/ -31/ -39/ TPD - - - TPE - - - TPED - - - Series 1-phase TP - - - IEC size 3-phase TP 225 M 2 M 28 S 1-phase TPE - - - 3-phase TPE - - - 5 55 75 PN 1 1 1 T min ; T max [ C] [-25;12] [-25;12] [-25;12] D1 D /D1 S [mm] 2/3 2/3 2/3 [mm] 2 95 555 [mm] 325 392 32 P [mm] 5 5 5 B1 [mm] 223 223 223 B2 [mm] 635 635 635 [mm] 223 223 223 B7 [mm] 67 67 67 B8 [mm] 3 3 3 B9 [mm] 335 335 335 C2 [mm] 58 58 58 C7 [mm] 52 52 52 C8 [mm] [mm] 2 2 2 L1 [mm] 9 9 9 L2 [mm] 19 19 19 L3 [mm] 62 62 62 H1 [mm] 31 31 31 H2 [mm] 368 368 368 H3 [mm] 1387 195 198 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 99

Technical data DN 125 6-pole, PN 16 TP, TPD, TPE, TPED, 6-pole, PN 16 TP, TPD 125-XXX/6 H 18 16 1 12 1 8 6-17/6-1/6-11/6-9/6-7/6-6/6 TP 125 Hz 2 2 6 8 1 12 1 Q [m³/h] 8-17/6 7 6 5-1/6-11/6 3-9/6 2-7/6-6/6 1 2 6 8 1 12 1 Q [m³/h] NPSH 2.5-1/6, -17/6 2. 1.5 1..5-9/6, -11/6-6/6, -7/6. Eta [%] 8 75 7 65 6 55 5 2 6 8 1 12 1 Q [m³/h] -7/6-6/6-1/6-17/6-9/6-11/6 2 6 8 1 12 1 Q [m³/h] 1 2 3 Q [l/s] 1 2 3 v [m/s] TM2 8757 9 Note: All curves apply to single-head pumps. For further information, see page. 1

Performance curves DN 125 6-pole, PN 16 P B3 P AF H3 AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 125-6/6-7/6-9/6-11/6-1/6-17/6 TPD TPE - - - - - - TPED - - - - - - Series 3 3 3 3 3 3 IEC size 1-phase TP - - - - - - 3-phase TP 1 112 132 132 132 16 1-phase TPE - - - - - - 3-phase TPE - - - - - - 1-/3-phase TP -/1.5 -/2.2 -/3 -/ -/5.5 -/7.5 1-/3-phase TPE -/- -/- -/- -/- -/- -/- PN PN 16 PN 16 PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 125 125 125 125 125 125 1-/3-phase TP [mm] -/23 -/227 -/267 -/267 -/267 -/32 1-/3-phase TPE [mm] -/- -/- -/- -/- -/- -/- 1-/3-phase TP [mm] -/135 -/18 -/167 -/167 -/167 -/197 1-/3-phase TPE [mm] -/- -/- -/- -/- -/- -/- AE 1-/3-phase TPE [mm] - - - - - - AF 1-/3-phase TPE [mm] - - - - - - P [mm] 2 2 3 3 3 3 B1 [mm] 2/537 2/537 271/566 271/566 271/566 271/566 B2 [mm] 22/518 22/518 23/552 23/552 23/552 23/552 B3 [mm] 6 6 6 6 6 6 1-phase TPE [mm] - - - - - - TP [mm] 2/537 2/537 271/566 271/566 271/566 271/566 3-phase TPE [mm] - - - - - - C1 [mm] 23/68 23/68 23/68 23/68 23/68 23/68 C5 [mm] 31/8 31/8 /175 /175 /175 /175 C6 [mm] 3 3 3 3 3 3 L1 [mm] 62 62 8 8 8 8 H1 [mm] 215 215 215 215 215 215 H2 [mm] 267 267 288 288 288 318 1-/3-phase TP [mm] -/829 -/853 -/876 -/91 -/91 -/111 H3 1-/3-phase TPE [mm] -/- -/- -/- -/- -/- -/- H [mm] - - - - - - M M16 M16 M16 M16 M16 M16 The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 11

Technical data DN 1 6-pole, PN 16 TP, TPD 1-XXX/6 H 11 1 9 8 7 6 5 3-11/6-9/6-7/6-6/6 TP 1 Hz 2 6 5 2 6 8 1 12 1 16 18 Q [m³/h] -11/6-9/6 3 2-6/6-7/6 1 2 6 8 1 12 1 16 18 Q [m³/h] NPSH 2.5 2. 1.5-6/6, -7/6, -9/6, -11/6 1..5. Eta [%] 8 75 7 65 6 55 5 2 6 8 1 12 1 16 18 Q [m³/h] -11/6-9/6-7/6-6/6 2 6 8 1 12 1 16 18 Q [m³/h] 1 2 3 Q [l/s]..5 1. 1.5 2. 2.5 v [m/s] TM2 8758 9 Note: All curves apply to single-head pumps. For further information, see page. 12

Performance curves DN 1 6-pole, PN 16 P B3 P H3 AF AE H3 D1 B1 B2 Rp 1/ M L1 C5 H H1 H2 C1 B1 D1 B2 AE AF AE AF M M L1 C6 C5 H H1 H2 C1 TM3 538 36 - TM3 539 36 Technical data TP 1-6/6-7/6-9/6-11/6 TPD TPE - - - - TPED - - - - Series 3 3 3 3 IEC size 1-phase TP - - - - 3-phase TP 112 132 132 132 1-phase TPE - - - - 3-phase TPE - - - - 1-/3-phase TP -/2.2 -/3 -/ -/5.5 1-/3-phase TPE -/- -/- -/- -/- PN PN 16 PN 16 PN 16 PN 16 T min ; T max [ C] [-25;12] [-25;12] [-25;12] [-25;12] D1 [mm] 1 1 1 1 1-/3-phase TP [mm] -/227 -/267 -/267 -/267 1-/3-phase TPE [mm] -/- -/- -/- -/- 1-/3-phase TP [mm] -/18 -/167 -/167 -/167 1-/3-phase TPE [mm] -/- -/- -/- -/- AE 1-/3-phase TPE [mm] - - - - AF 1-/3-phase TPE [mm] - - - - P [mm] 2 3 3 3 B1 [mm] 296/583 296/583 296/583 296/583 B2 [mm] 237/553 237/553 237/553 237/553 B3 [mm] 6 6 6 6 1-phase TPE [mm] - - - - TP [mm] 296/583 296/583 296/583 296/583 3-phase TPE [mm] - - - - C1 [mm] 23/68 23/68 23/68 23/68 C5 [mm] /153 /153 /153 /153 C6 [mm] 3 3 3 3 L1 [mm] 8 8 8 8 H1 [mm] 215 215 215 215 H2 [mm] 275 291 291 291 H3 1-/3-phase TP [mm] -/862 -/879 -/917 -/917 1-/3-phase TPE [mm] -/- -/- -/- -/- H [mm] - - - - M M16 M16 M16 M16 The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 13

Technical data DN 1 2-pole, PN 25 TP, 2-pole, PN 25 TP 1-XXX/2 H 1 9 8-96/2-82/2 TP 1 Hz H 18 17 16 1-168/2-153/2 TP 1 Hz 7 6-7/2-62/2 1 13 12 11-1/2-118/2-1/2 3 1 9 8 2 8 12 16 2 2 28 32 Q [m³/h] 7-96/2 6 3 2 1-82/2-62/2-7/2 8 12 16 2 2 28 32 Q [m³/h] NPSH 1 9 8 7 6 5 3 2 Eta [%] 8 75 7 65 6 55 5 8 12 16 2 2 28 32 Q [m³/h] -82/2-62/2-7/2-96/2 8 12 16 2 2 28 32 Q [m³/h] 7 8 12 16 2 2 28 32 Q [m³/h] 16 1 12 1 8 6 2-118/2-1/2-153/2-1/2-168/2 8 12 16 2 2 28 32 Q [m³/h] NPSH 1 9 8 7 6 5 3 2 Eta [%] 8 75 7 65 6 55 5 8 12 16 2 2 28 32 Q [m³/h] -1/2-118/2-1/2-153/2-168/2 8 12 16 2 2 28 32 Q [m³/h] 2 6 8 Q [l/s] 2 6 8 1 v [m/s] TM2 683 2 6 8 Q [l/s] 2 6 8 1 v [m/s] TM2 6831 1

Performance curves DN 1 2-pole, PN 25 Rp 1/2 P H2 H3 D1D H1 D1S Rp 1/2 L1 B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 1-62/2-7/2-82/2-96/2-1/2-118/2-1/2-153/2-168/2 TPD - - - - - - - - - TPE - - - - - - - - - TPED - - - - - - - - - Series 1-phase TP - - - - - - - - - IEC size 3-phase TP 2 L 225 M 2 M 28 S 28 S 28 M 315 S 315 M 315 L 1-phase TPE - - - - - - - - - 3-phase TPE - - - - - - - - - 37 5 55 75 75 9 11 132 16 PN 25 25 25 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] 1/125 1/125 1/125 1/125 1/125 1/125 1/125 1/125 1/125 [mm] 7 39 87 5 5 555 61 61 61 [mm] 315 1 33 32 32 32 95 95 95 P [mm] 5 5 5 5 5 5 8 8 8 B1 [mm] 18 18 18 18 18 18 18 18 18 B2 [mm] 7 7 7 7 25 25 25 25 25 [mm] 18 18 193 227 219 219 312 312 312 B5 [mm] 36 36 36 36 36 36 36 36 36 B6 [mm] 335 335 335 335 335 335 335 335 335 B7 [mm] 67 67 67 67 75 75 6 6 6 B8 [mm] 192 192 192 192 2 2 2 2 2 B9 [mm] 215 215 215 215 225 225 225 225 225 C3 [mm] 32 32 32 32 32 32 32 32 32 C [mm] 295 295 295 295 295 295 295 295 295 C9 [mm] 89 89 89 89 66 66 66 66 66 [mm] 2 2 2 2 2 2 2 2 2 L1 [mm] 53 53 53 53 66 66 66 66 66 H1 [mm] 16 16 16 16 17 17 17 17 17 H2 [mm] 315 315 315 315 3 3 33 33 33 H3 [mm] 1186 1183 1222 1295 129 1 15 1565 1565 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 15

Technical data DN 1 -pole, PN 25 TP, -pole, PN 25 TP 1-XXX/ H 26 2 22 2 18 16 1 12-26/ -22/ -19/ TP 1 Hz H 36 32 28 2 2-2/ -38/ -32/ -27/ TP 1 Hz 1 16 8 2 6 8 1 12 1 16 Q [m³/h] 12 2 6 8 1 12 1 16 Q [m³/h] 1 8 6-19/ -22/ -26/ 2 16 12 8-2/ -38/ -32/ -27/ 2 2 6 8 1 12 1 16 Q [m³/h] NPSH 5 3 2 1 2 6 8 1 12 1 16 Q [m³/h] NPSH 5 3 2 1 Eta [%] 8 75 7 65 6 55 5 2 6 8 1 12 1 16 Q [m³/h] -22/ -19/ -26/ 2 6 8 1 12 1 16 Q [m³/h] Eta [%] 8 75 7 65 6 55 5 2 6 8 1 12 1 16 Q [m³/h] -2/ -27/ -38/ -32/ 2 6 8 1 12 1 16 Q [m³/h] 1 2 3 Q [l/s] 1 2 3 5 6v [m/s] TM2 6837 81 1 2 3 Q [l/s] 1 2 3 5 6v [m/s] TM2 6838 16

Performance curves DN 1 -pole, PN 25 Rp 1/2 P H2 H3 D1D H1 D1S Rp 1/2 L1 B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 1-19/ -22/ -26/ -27/ -32/ -38/ -2/ TPD - - - - - - - TPE - - - - - - - TPED - - - - - - - Series 1-phase TP - - - - - - - IEC size 3-phase TP 132 S 132 M 16 M 16 M 16 L 18 M 18 L 1-phase TPE - - - - - - - 3-phase TPE - - - - - - - 5.5 7.5 11 11 15 18.5 22 PN 25 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] 1/125 1/125 1/125 1/125 1/125 1/125 1/125 [mm] 26 26 31 31 31 363 363 [mm] 159 159 2 2 2 262 262 P [mm] B1 [mm] 18 18 18 18 18 18 18 B2 [mm] 7 7 7 25 25 25 25 [mm] 18 18 18 18 18 18 18 B5 [mm] 36 36 36 36 36 36 36 B6 [mm] 335 335 335 335 335 335 335 B7 [mm] 1 1 1 29 3 29 29 B8 [mm] 192 192 192 2 2 2 2 B9 [mm] 215 215 215 225 225 225 225 C3 [mm] 32 32 32 32 32 32 32 C [mm] 295 295 295 295 295 295 295 C9 [mm] 89 89 89 66 66 66 66 [mm] 2 2 2 2 2 2 2 L1 [mm] 53 53 53 66 66 66 66 H1 [mm] 16 16 16 17 17 17 17 H2 [mm] 285 285 285 27 27 27 27 H3 [mm] 82 87 916 911 985 999 1 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 17

Technical data DN 125 -pole, PN 25 TP 125-XXX/ H 2 22 2-2/ -2/ TP 125 Hz H 5-3/ -37/ TP 125 Hz 18 35 16 1 12 1-1/ 3 25 2-31/ -28/ 8 6 8 12 16 2 Q [m³/h] 1-2/ 12 1 8 6 2-2/ -1/ 8 12 16 2 Q [m³/h] NPSH 3. 2.5 2. 1.5 1. 15 1 3 25 2 15 1 5 8 12 16 2 2 28 Q [m³/h] -28/ -3/ -37/ -31/ NPSH 8 12 16 2 2 28 Q [m³/h] 5 3 2.5 1 Eta [%] 8 75 7 65 6 55 5 8 12 16 2 Q [m³/h] -2/ -2/ -1/ 8 12 16 2 Q [m³/h] 2 6 Q [l/s] 1 2 3 5 v [m/s] TM2 6839 81 Eta [%] 8 75 7 65 6 55 5 8 12 16 2 2 28 Q [m³/h] -3/ -37/ -28/ -31/ 8 12 16 2 2 28 Q [m³/h] 2 6 8 Q [l/s] TM2 68 85 18

Performance curves DN 125 -pole, PN 25 Rp 1/2 P H2 H3 D1D H1 D1S Rp 1/2 L1 B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 125-1/ -2/ -2/ -28/ -31/ -37/ -3/ TPD - - - - - - - TPE - - - - - - - TPED - - - - - - - Series 1-phase TP - - - - - - - IEC size 3-phase TP 132 M 16 M 16 L 16 L 18 M 18 L 2 L 1-phase TPE - - - - - - - 3-phase TPE - - - - - - - 7.5 11 15 15 18.5 22 3 PN 25 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] 125/1 125/1 125/1 125/1 125/1 125/1 125/1 [mm] 26 31 31 31 363 363 2 [mm] 159 2 2 2 262 262 3 P [mm] B1 [mm] 2 2 2 2 2 2 2 B2 [mm] 3 3 3 51 51 51 51 [mm] 2 2 2 2 2 2 2 B5 [mm] B6 [mm] 36 36 36 36 36 36 36 B7 [mm] 23 23 23 67 68 68 67 B8 [mm] 2 2 2 22 22 22 22 B9 [mm] 23 23 23 227 227 227 227 C3 [mm] 36 36 36 36 36 36 36 C [mm] 32 32 32 32 32 32 32 C9 [mm] 536 536 536 66 66 66 66 [mm] 2 2 2 2 2 2 2 L1 [mm] 59 59 59 66 66 66 66 H1 [mm] 185 185 185 18 18 18 18 H2 [mm] 287 287 287 283 283 283 283 H3 [mm] 92 93 117 18 122 173 113 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 19

Technical data DN 1 -pole, PN 25 TP 1-XXX/ H 65 TP 1-6/ 6 Hz 55-53/ 5-3/ 35-3/ -32/ 3-27/ 25 2-2/ 15 1 1 1 2 2 3 3 Q [m³/h] 7 6-6/ -53/ -3/ 3-3/ -32/ 2-27/ -2/ 1 NPSH 1 1 2 2 3 3 Q [m³/h] 7 6 5 3 2 1 Eta [%] 85 8 75 7 65 6 55 5 1 1 2 2 3 3 Q [m³/h] -32/ -3/ -2/ -3/ -6/ -53/ -27/ 1 1 2 2 3 3 Q [m³/h] 2 6 8 1 12 Q [l/s] 1 2 3 5 6 v [m/s] TM2 682 11

Performance curves DN 1 -pole, PN 25 Rp 1/2 P H2 H3 D1D H1 D1S Rp 1/2 L1 B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 1-2/ -27/ -32/ -3/ -3/ -53/ -6/ TPD - - - - - - - TPE - - - - - - - TPED - - - - - - - Series 1-phase TP - - - - - - - IEC size 3-phase TP 18 M 18 L 2 L 225 S 225 M 2 M 28 S 1-phase TPE - - - - - - - 3-phase TPE - - - - - - - 18.5 22 3 37 5 55 75 PN 25 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] 1/2 1/2 1/2 1/2 1/2 1/2 1/2 [mm] 363 363 2 2 2 95 555 [mm] 262 262 3 325 325 392 32 P [mm] 5 5 5 5 B1 [mm] 23 23 23 23 235 235 235 B2 [mm] 575 575 575 [mm] 23 23 23 23 235 235 235 B5 [mm] 6 6 6 6 7 7 7 B6 [mm] 1 1 1 B7 [mm] 517 517 518 518 58 58 58 B8 [mm] 229 229 229 229 26 26 26 B9 [mm] 275 275 275 275 315 315 315 C3 [mm] 2 2 2 2 2 2 2 C [mm] 36 36 36 36 36 36 36 C9 [mm] 676 676 676 676 823 823 823 [mm] 2 2 2 2 2 2 2 L1 [mm] 7 7 7 7 9 9 9 H1 [mm] 225 225 225 225 2 2 2 H2 [mm] 293 293 293 323 325 325 325 H3 [mm] 177 1128 1186 1197 128 1392 1395 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 111

Technical data DN 2 -pole, PN 25 TP 2-XXX/ H 5 35 3 25 2 15 1 5 3-2/ -38/ -28/ -26/ TP 2 Hz 1 2 3 6 Q [m³/h] -2/ -28/ -38/ H 65 6 55 5 35 3 25 2 1 8 6-62/ -56/ -51/ -/ TP 2 Hz 1 2 3 6 Q [m³/h] -62/ -56/ -51/ -/ 2-26/ 2 1 NPSH 1 2 3 6 Q [m³/h] 6 5 3 2 1 Eta [%] 8 75 7 65 6 55 5 1 2 3 6 Q [m³/h] -2/ -38/ -26/ -28/ 1 2 3 6 Q [m³/h] 1 1 Q [l/s] TM2 683 85 1 2 3 6 Q [m³/h] NPSH 6 5 3 2 1 Eta [%] 9 85 8 75 7 65 6 55 5 1 2 3 6 Q [m³/h] -51/ -/ -62/ -56/ 1 2 3 6 Q [m³/h] 1 1 Q [l/s] 1 2 3 5 6v [m/s] TM2 68 112

Performance curves DN 2 -pole, PN 25 Rp 1/2 P H2 H3 D1D H1 D1S Rp 1/2 L1 B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 2-26/ -28/ -38/ -2/ -/ -51/ -56/ -62/ TPD - - - - - - - - TPE - - - - - - - - TPED - - - - - - - - Series 1-phase TP - - - - - - - - IEC size 3-phase TP 2 L 225 S 225 M 2 M 2 M 28 S 28 M 315 S 1-phase TPE - - - - - - - - 3-phase TPE - - - - - - - - 3 37 5 55 55 75 9 11 PN 25 25 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] 2/2 2/2 2/2 2/2 2/2 2/2 2/2 2/2 [mm] 2 2 2 95 95 555 555 61 [mm] 3 325 325 392 392 32 32 95 P [mm] 5 5 5 5 5 5 66 B1 [mm] 26 26 26 26 268 268 268 268 B2 [mm] 56 56 56 56 6 6 6 6 [mm] 26 26 26 26 268 268 268 268 B5 [mm] 52 52 52 52 535 535 535 535 B6 [mm] 6 6 6 6 7 7 7 7 B7 [mm] 572 572 572 572 65 65 65 65 B8 [mm] 26 26 26 26 3 3 3 3 B9 [mm] 3 3 3 3 3 3 3 3 C3 [mm] 8 8 8 8 85 85 85 85 C [mm] 2 2 2 2 2 2 2 2 C9 [mm] 766 766 766 766 113 113 113 113 [mm] 2 2 2 2 2 2 2 2 L1 [mm] 83 83 83 83 11 11 11 11 H1 [mm] 2 2 2 2 29 29 29 29 H2 [mm] 38 338 338 338 327 327 327 357 H3 [mm] 128 1237 1297 15 13 137 157 1579 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 113

Technical data DN 2 -pole, PN 25 TP 2-XXX/ H 36 32 28 2 2 16 12 8 7 6 3 2-37/ -32/ -27/ TP 2 Hz 1 2 3 6 7 8 Q [m³/h] -32/ -27/ -37/ NPSH 1 2 3 6 7 8 Q [m³/h] 5 3 2 1 H 7 65 6 55 5 35 3 25 2 16 1 12 1 8 6-66/ -6/ -5/ -9/ TP 2 Hz 1 2 3 6 7 8 Q [m³/h] -9/ -66/ -6/ -5/ NPSH 1 2 3 6 7 8 Q [m³/h] 6 5 3 2 1 Eta [%] 85 8 75 7 65 6 55 5 1 2 3 6 7 8 Q [m³/h] -27/ -37/ -32/ 1 2 3 6 7 8 Q [m³/h] Eta [%] 8 75 7 65 6 55 5 1 2 3 6 7 8 Q [m³/h] -6/ -66/ -9/ -5/ 1 2 3 6 7 8 Q [m³/h] 1 1 2 2 Q [l/s] 1 2 3 5 v [m/s] TM2 685 1 1 2 2 Q [l/s] 1 2 3 5 v [m/s] TM2 686 11

Performance curves DN 2 -pole, PN 25 Rp 1/2 P H2 H3 D1D H1 D1S Rp 1/2 L1 B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 2-27/ -32/ -37/ -9/ -5/ -6/ -66/ TPD - - - - - - - TPE - - - - - - - TPED - - - - - - - Series 1-phase TP - - - - - - - IEC size 3-phase TP 225 M 2 M 28 S 28 M 315 S 315 M 315 M 1-phase TPE - - - - - - - 3-phase TPE - - - - - - - 5 55 75 9 11 132 16 PN 25 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] 2/3 2/3 2/3 2/3 2/3 2/3 2/3 [mm] 2 95 555 555 61 61 61 [mm] 325 392 32 32 95 95 95 P [mm] 5 5 5 66 66 66 66 B1 [mm] 33 33 33 33 33 33 33 B2 [mm] 6 6 6 7 7 7 7 [mm] 33 33 33 33 33 33 33 B5 [mm] 65 65 65 65 65 65 65 B6 [mm] 5 5 5 5 5 5 5 B7 [mm] 67 67 67 72 72 72 72 B8 [mm] 3 3 3 33 33 33 33 B9 [mm] 3 3 3 37 37 37 37 C3 [mm] 5 5 5 5 5 5 5 C [mm] 85 85 85 85 85 85 85 C9 [mm] 855 855 855 116 116 116 116 [mm] 2 2 2 2 2 2 2 L1 [mm] 9 9 9 12 12 12 12 H1 [mm] 3 3 3 3 3 3 3 H2 [mm] 368 368 368 373 373 358 358 H3 [mm] 1377 185 188 1653 1655 18 18 TP(E), TP(E)D pumps are primarily fitted with IE3 motors. See section Motors on pages 36 to. 115

Technical data DN 3 -pole, PN 25 TP 3-XXX/ H 75 7 65 6 55 5 35 3 25-7/ -67/ -59/ TP 3 Hz 8 12 16 Q [m³/h] 3 2 2 1-67/ -59/ -7/ 1 NPSH 8 12 16 Q [m³/h] 1 12 1 8 6 2 Eta [%] 85 8 75 7 65 6 55 5 8 12 16 Q [m³/h] -7/ -59/ -67/ 8 12 16 Q [m³/h] 1 2 3 Q [l/s] TM2 687 116

Performance curves DN 3 -pole, PN 25 Rp 1/2 P H2 H3 D1D Rp 1/2 L1 H1 D1S B8 B9 B6 C C9 ø C3 B5 B1 B2 B7 TM2 83 Technical data TP 3-59/ -67/ -7/ TPD - - - TPE - - - TPED - - - Series 1-phase TP - - - IEC size 3-phase TP 315 L 315 315 1-phase TPE - - - 3-phase TPE - - - 2 2 315 PN 25 25 25 T min ; T max [ C] [;1] [;1] [;1] D1 D /D1 S [mm] 3/3 3/3 3/3 [mm] 61 71 71 [mm] 95 69 69 P [mm] 66 11 11 B1 [mm] 338 338 338 B2 [mm] 79 79 79 [mm] 338 338 338 B5 [mm] 675 675 675 B6 [mm] 65 65 65 B7 [mm] 817 817 817 B8 [mm] 37 37 37 B9 [mm] 2 2 2 C3 [mm] 62 62 62 C [mm] 5 5 5 C9 [mm] 12 12 12 [mm] 2 2 2 L1 [mm] 13 13 13 H1 [mm] 375 375 375 H2 [mm] 6 6 6 H3 [mm] 213 251 251 117

Technical data DN -pole, PN 25 TP -XXX/ H 55 5 35 3 25 2 15 1-5/ -51/ -7/ TP Hz 1 1 2 2 3 3 Q [m³/h] H 8 75 7 65 6 55 5 35 3 25-76/ -72/ -67/ TP Hz 8 16 2 32 Q [m³/h] 6-76/ 3 2-5/ -51/ -7/ 3-72/ -67/ 1 2 1 1 2 2 3 3 Q [m³/h] NPSH 1 1 NPSH 8 16 2 32 Q [m³/h] 16 12 1 1 12 8 1 6 8 6 2 Eta [%] 8 75 7 65 6 55 5 1 1 2 2 3 3 Q [m³/h] -7/ -51/ -5/ 1 1 2 2 3 3 Q [m³/h] 2 Eta [%] 85 8 75 7 65 6 55 5 8 16 2 32 Q [m³/h] -67/ -72/ -76/ 8 16 2 32 Q [m³/h] 2 6 8 1 Q [l/s] 2 6 8 v [m/s] TM2 688 8 12 Q [l/s] 2 6 8 1 v [m/s] TM2 689 118

Performance curves DN -pole, PN 25 P Rp 1/2 H3 PN H1 H2 PN D1D Rp 1/2 L1 D1S B6 C ø C9 C3 B5 B9 B8 B2 B1 B7 TM2 8351 337 Technical data TP -7/ -51/ -5/ -67/ -72/ -76/ TPD - - - - - - TPE - - - - - - TPED - - - - - - Series 1-phase TP - - - - - - IEC size 3-phase TP 315 355 355 355 1-phase TPE - - - - - - 3-phase TPE - - - - - - 315 355 56 63 PN 25 25 25 25 25 25 T min ; T max [ C] [;1] [;1] [;1] [;1] [;1] [;1] D1 D /D1 S [mm] / / / / / / [mm] 71 79 79 79 88 88 [mm] 69 725 725 875 925 925 P [mm] 11 9 9 9 11 11 B1 [mm] 8 8 8 8 8 8 B2 [mm] 16 16 16 16 16 16 [mm] 8 8 8 8 8 8 B5 [mm] 895 895 895 895 895 895 B6 [mm] 8 8 8 8 8 8 B7 [mm] 166 166 166 166 166 166 B8 [mm] B9 [mm] 56 56 56 56 56 56 C3 [mm] 83 83 83 83 83 83 C [mm] 735 735 735 735 735 735 C9 [mm] 132 132 132 132 132 132 [mm] 27 27 27 27 27 27 L1 [mm] 1 1 1 1 1 1 H1 [mm] H2 [mm] 76 76 76 76 76 76 H3 [mm] 2386 2611 2611 2611 2771 2771 119

Weights and shipping volume TP, TPD, TPE, TPED TP, TPD, TPE, TPED, 2-pole, PN 6, 1, 16 Connection Weights Pump type D1 D D1 S Shipping volume [m 3 ] Net [kg] Gross [kg] TP/TPD TPE/TPED TP/TPD TPE/TPED TP/TPD TPE/TPED TP 25-/2 R G 1/2 G 1/2 7/- - 8/- -.2/- - TP 25-9/2 R G 1/2 G 1/2 8/- 11/- 9/- 13/-.2/-.36/- TP 32-/2 R G 2 G 2 8/- - 9/- -.2/- - TP 32-9/2 R G 2 G 2 8/- 12/- 9/- 1/-.2/-.36/- TP, TPD 32-6/2 DN 32 DN 32 16/32 22/39 17/33 25/3.36/.72.6/.151 TP, TPD 32-12/2 DN 32 DN 32 19/38 21/2 2/ 22/.36/.72.56/.72 TP, TPD 32-1/2 DN 32 DN 32 23/5 29/59 26/57 33/62.6/.82.6/.151 TP, TPD 32-18/2 DN 32 DN 32 2/5 29/59 27/57 32/62.6/.82.6/.82 TP, TPD 32-23/2 DN 32 DN 32 25/5 1/81 28/57 5/85.6/.82.91/.221 TP, TPD 32-2/2 DN 32 DN 32 2/86 /11 7/11 62/118.138/.3912.138/.3912 TP, TPD 32-2/2 DN 32 DN 32 6/93 52/15 51/19 57/123.138/.3912.18/.3912 TP, TPD 32-32/2 DN 32 DN 32 51/1 57/11 57/12 62/133.18/.3912.18/.3912 TP, TPD 32-38/2 DN 32 DN 32 63/127 65/13 68/1 7/19.18/.58.18/.518 TP, TPD 32-6/2 DN 32 DN 32 76/151 79/157 82/169 85/176.2176/.58.2176/.518 TP, TPD 32-58/2 DN 32 DN 32 9/18 95/189 16/198 113/28.2176/.58.2176/.518 TP -/2 DN DN 12/- - 13/- -.2/- - TP, TPD -6/2 DN DN 2/2 23/8 21/3 25/52.36/.72.56/.72 TP -9/2 DN DN 12/- 17/- 13/- 18/-.2/-.25/- TP, TPD -12/2 DN DN 2/1 22/6 21/3 2/.36/.72.56/.72 TP -18/2 DN DN 2/- 29/- 25/- 32/-.36/-.6/- TP, TPD -19/2 DN DN 29/5 /82 32/59 8/87.6/.151.91/.221 TP, TPD -23/2 DN DN 36/56 6/81 39/61 9/86.6/.151.91/.221 TP, TPD -27/2 DN DN 39/7 37/75 2/75 /8.6/.151.91/.221 TP, TPD -2/2 DN DN 53/17 58/118 58/12 6/136.18/.3912.18/.3912 TP, TPD -3/2 DN DN 65/13 66/133 7/18 72/152.18/.58.18/.518 TP, TPD -36/2 DN DN 7/1 73/16 75/158 78/165.18/.58.18/.518 TP, TPD -7/2 DN DN 9/183 95/192 15/21 113/211.2176/.58.2176/.518 TP, TPD -58/2 DN DN 1/211 16/215 119/228 125/23.2176/.58.2176/.518 TP, TPD -6/2 DN DN 2/5 2/ 21/8 28/53.56/.72.6/.151 TP, TPD -12/2 DN DN 28/56 /83 29/58 1/85.56/.72.91/.221 TP, TPD -18/2 DN DN 28/56 1/83 29/58 5/86.56/.72.91/.221 TP, TPD -16/2 DN DN 7/9 53/16 52/111 6/123.138/.3912.18/.3912 TP, TPD -19/2 DN DN 8/98 5/11 53/11 6/128.138/.3912.18/.3912 TP, TPD -2/2 DN DN 5/18 59/119 59/125 6/137.18/.3912.18/.3912 TP, TPD -29/2 DN DN 65/131 67/13 7/19 72/153.18/.58.18/.518 TP, TPD -36/2 DN DN 71/1 7/1 76/161 8/168.18/.58.18/.518 TP, TPD -3/2 DN DN 86/17 91/182 11/191 19/21.18/.58.18/.518 TP, TPD -/2 DN DN 112/228 11/232 127/27 132/251.2176/.518.2176/.518 TP, TPD -57/2 DN DN 19/33 181/366 166/32 199/392.728/.67.728/1.52 TP, TPD -71/2 DN DN 179/363 18/373 196/38 23/399.728/.67.728/1.52 TP, TPD -83/2 DN DN 181/367 29/22 198/388 227/8.728/.67.728/1.52 TP, TPD -9/2 DN DN 196/396 222/8 222/8 2/7.728/.67.728/1.52 TP, TPD 65-6/2 DN 65 DN 65 26/53 3/59 27/56 33/63.56/.1.6/.151 TP, TPD 65-12/2 DN 65 DN 65 31/63 /86 32/65 2/9.56/.1.91/.221 TP, TPD 65-18/2 DN 65 DN 65 38/76 5/92 1/79 8/95.66/.1.91/.221 TP, TPD 65-19/2 DN 65 DN 65 57/116 63/126 63/132 68/15.18/.3912.18/.3912 TP, TPD 65-23/2 DN 65 DN 65 69/139 71/12 7/156 76/161.18/.58.18/.518 TP, TPD 65-26/2 DN 65 DN 65 7/19 77/155 79/166 82/173.18/.58.18/.518 TP, TPD 65-3/2 DN 65 DN 65 89/178 93/187 1/196 112/26.18/.58.18/.518 TP, TPD 65-1/2 DN 65 DN 65 13/26 15/21 118/22 123/229.18/.58.18/.518 TP, TPD 65-6/2 DN 65 DN 65 151/31 182/372 168/331 21/398.728/.67.728/1.52 TP, TPD 65-5/2 DN 65 DN 65 18/369 185/379 197/39 2/5.728/.67.728/1.52 TP, TPD 65-66/2 DN 65 DN 65 182/373 21/27 199/39 228/53.728/.67.728/1.52 TP, TPD 65-72/2 DN 65 DN 65 197/2 223/5 216/29 22/81.728/1.52.728/1.52 TP, TPD 65-93/2 DN 65 DN 65 35/699-36/725 -.728/1.52 - TP, TPD 8-12/2 DN 8 DN 8 3/83 52/1 /86 57/16.66/.1.91/.37 12

Weights and shipping volume TP, TPD, TPE, TPED Pump type Connection Weights Shipping volume [m 3 ] Net [kg] Gross [kg] D1 D D1 S TP/TPD TPE/TPED TP/TPD TPE/TPED TP/TPD TPE/TPED TP, TPD 8-1/2 DN 8 DN 8 61/12 66/13 7/11 78/151.18/.3912.18/.3912 TP, TPD 8-18/2 DN 8 DN 8 65/132 7/1 78/19 88/18.18/.58.18/.67 TP, TPD 8-21/2 DN 8 DN 8 78/157 8/162 9/17 9/192.18/.58.18/.518 TP, TPD 8-2/2 DN 8 DN 8 93/187 97/195 15/2 118/225.18/.58.728/.518 TP, TPD 8-2/2 DN 8 DN 8 11/211 115/238 115/23 136/268.2176/.518.728/.518 TP, TPD 8-33/2 DN 8 DN 8 18/3 181/37 169/33 23/2.728/.67.728/.67 TP, TPD 8-/2 DN 8 DN 8 16/327 185/377 18/356 25/25.728/.67.728/.67 TP, TPD 8-52/2 DN 8 DN 8 176/39 215/27 197/379 236/77.728/1.52.728/1.52 TP, TPD 8-57/2 DN 8 DN 8 25/7 228/53 226/57 29/3.728/1.52.728/1.52 TP, TPD 8-7/2 DN 8 DN 8 3/697-371/77 -.728/1.52 - TP, TPD 1-12/2 DN 1 DN 1 53/18 61/12 55/113 66/13.1/.213.12/.37 TP, TPD 1-16/2 DN 1 DN 1 93/196 95/22 17/26 19/252.2176/.518.2176/.67 TP, TPD 1-2/2 DN 1 DN 1 18/226 112/235 122/276 13/285.728/.518.728/.67 TP, TPD 1-2/2 DN 1 DN 1 122/25 127/26 136/3 19/31.728/.518.728/.67 TP, TPD 1-2/2 DN 1 DN 1 175/351 26/13 199/1 23/63.728/1.52.728/1.52 TP, TPD 1-31/2 DN 1 DN 1 2/1 29/2 228/6 233/7.728/1.52.728/1.52 TP, TPD 1-36/2 DN 1 DN 1 27/1 23/68 23/6 257/518.728/1.52.728/1.52 TP, TPD 1-39/2 DN 1 DN 1 221/3 27/95 2/93 27/55.728/1.52.728/1.52 TP, TPD 1-8/2 DN 1 DN 1 38/771-25/828 -.797/1.8 - The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. TP, TPD, TPE, TPED, -pole, PN 6, 1, 16 Connection Weights Pump type D1 D D1 S Net [kg] Gross [kg] Shipping volume [m 3 ] TP/TPD TPE/TPED TP/TPD TPE/TPED TP/TPD TPE/TPED TP, TPD 32-3/ DN 32 DN 32 15/3 21/38 16/31 2/2.36/.72.6/.151 TP, TPD 32-/ DN 32 DN 32 25/32 29/5 28/33 32/58.6/.72.6/.151 TP, TPD 32-6/ DN 32 DN 32 25/ 29/5 28/53 32/58.36/.82.6/.151 TP, TPD 32-8/ DN 32 DN 32 35/69 36/7 /86 8/92.138/.3912.18/.3912 TP, TPD 32-1/ DN 32 DN 32 36/71 37/75 1/88 9/92.138/.3912.18/.3912 TP, TPD 32-12/ DN 32 DN 32 9/9 8/96 55/11 61/113.1632/.3912.2176/.3912 TP, TPD -3/ DN DN 17/33 23/1 18/3 26/.36/.72.6/.151 TP -6/ DN DN 22/2 27/- 23/3 3/-.36/.72.6/- TP, TPD -9/ DN DN 28/ 32/9 32/56 36/5.76/.151.76/.151 TP, TPD -1/ DN DN 1/83 2/85 5/99 5/13.138/.3912.18/.3912 TP, TPD -13/ DN DN 7/98 58/12 53/11 71/137.1632/.3912.18/.3912 TP, TPD -16/ DN DN 53/11 6/131 59/126 71/1.2176/.3912.2176/.3912 TP, TPD -3/ DN DN 2/6 3/51 25/8 33/55.36/.72.6/.151 TP, TPD -6/ DN DN 25/ 28/56 26/52 3/61.56/.72.56/.72 TP, TPD -9/ DN DN 3/87 /89 7/13 56/16.138/.3912.18/.3912 TP, TPD -11/ DN DN 55/115 66/137 61/13 79/167.1632/.518.2176/.518 TP, TPD -13/ DN DN 61/127 72/19 67/16 79/167.1632/.518.2176/.518 TP, TPD -16/ DN DN 6/132 73/151 7/151 8/17.2176/.518.2176/.518 TP, TPD -19/ DN DN 69/12 83/171 75/162 9/19.2176/.518.2176/.518 TP, TPD -23/ DN DN 8/165 8/165 87/181 87/18.2176/.518.2176/.518 TP, TPD 65-3/ DN 65 DN 65 33/56 37/62 35/59 1/65.56/.1.6/.151 TP, TPD 65-6/ DN 65 DN 65 33/63 36/69 3/66 38/79.56/.1.56/.1 TP, TPD 65-9/ DN 65 DN 65 6/92 57/115 51/19 69/132.1632/.3912.18/.3912 TP, TPD 65-11/ DN 65 DN 65 63/13 7/155 69/1 8/17.2176/.3912.2176/.58 TP, TPD 65-13/ DN 65 DN 65 65/138 75/158 71/155 82/176.2176/.3912.2176/.58 TP, TPD 65-1/ DN 65 DN 65 7/16 8/177 76/166 91/195.2176/.58.2176/.518 TP, TPD 65-17/ DN 65 DN 65 81/171 81/171 87/188 88/189.2176/.58.2176/.518 TP, TPD 65-2/ DN 65 DN 65 8/169 11/21 87/186 18/229.2176/.58.2176/.518 TP, TPD 8-3/ DN 8 DN 8 37/68 1/72 39/71 /76.56/.1.6/.151 TP, TPD 8-6/ DN 8 DN 8 37/7 /95 39/72 53/1.66/.1.91/.37 TP, TPD 8-7/ DN 8 DN 8 67/11 7/156 8/159 87/173.2176/.3912.2176/.58 TP, TPD 8-9/ DN 8 DN 8 7/18 75/158 83/165 88/175.2176/.58.2176/.58 121

Weights and shipping volume TP, TPD, TPE, TPED Pump type Connection Weights Shipping volume [m 3 ] Net [kg] Gross [kg] D1 D D1 S TP/TPD TPE/TPED TP/TPD TPE/TPED TP/TPD TPE/TPED TP, TPD 8-11/ DN 8 DN 8 73/153 8/176 86/17 98/26.2176/.58.2176/.518 TP, TPD 8-1/ DN 8 DN 8 88/172 87/171 12/192 11/21.2176/.518.2176/.67 TP, TPD 8-17/ DN 8 DN 8 11/199 16/29 115/218 12/239.2176/.518.728/.67 TP, TPD 8-2/ DN 8 DN 8 19/393 18/366 218/3 2/17.9696/1.52.9696/1.52 TP, TPD 8-27/ DN 8 DN 8 25/15 25/16 229/65 23/66.9696/1.52.9696/1.52 TP, TPD 8-3/ DN 8 DN 8 239/8 233/72 263/53 258/522.9696/1.52.9696/1.52 TP, TPD 1-3/ DN 1 DN 1 1/85 3/93 /9 6/13.1/.213.151/.22 TP, TPD 1-6/ DN 1 DN 1 52/17 63/122 55/113 67/127.1/.213.12/.37 TP, TPD 1-7/ DN 1 DN 1 95/191 1/21 19/28 11/251.728/.67.728/.67 TP, TPD 1-9/ DN 1 DN 1 97/196 19/218 122/26 133/268.728/.67.728/.67 TP, TPD 1-11/ DN 1 DN 1 17/215 16/213 131/265 13/26.728/.67.728/.67 TP, TPD 1-13/ DN 1 DN 1 139/282 1/292 16/332 169/32.728/1.52.728/1.52 TP, TPD 1-17/ DN 1 DN 1 168/3 155/313 192/39 189/36.728/1.52.728/1.52 TP, TPD 1-2/ DN 1 DN 1 239/99 2/ 26/59 29/5.9696/1.52.9696/1.52 TP, TPD 1-2/ DN 1 DN 1 27/568 268/556 298/618 318/66.9696/1.52.9696/1.52 TP, TPD 1-33/ DN 1 DN 1 285/589 291/61 39/6 31/652.9696/1.52.9696/1.52 TP, TPD 1-37/ DN 1 DN 1 331/681 33/679 373/732 38/73.9696/1.52.9696/1.8 TP, TPD 1-1/ DN 1 DN 1 36/713-388/763 -.9696/1.8 TP, TPD 125-11/ DN 125 DN 125 183/393 188/3 213/3 218/53.9696/1.52.9696/1.52 TP, TPD 125-13/ DN 125 DN 125 212/ 198/ 22/1 29/7.9696/1.52.9696/1.52 TP, TPD 125-16/ DN 125 DN 125 222/71 223/72 252/522 273/523.9696/1.52.9696/1.52 TP, TPD 125-21/ DN 125 DN 125 298/6 292/592 328/65 32/62.9696/1.52.9696/1.52 TP, TPD 125-2/ DN 125 DN 125 38/623 31/635 358/67 36/686.9696/1.8.9696/1.52 TP, TPD 125-32/ DN 125 DN 125 355/717 35/715 12/775 2/766.9696/1.8.9696/1.52 TP, TPD 125-36/ DN 125 DN 125 37/79-28/86 -.9696/1.8 - TP, TPD 125-2/ DN 125 DN 125 6/928-517/985-1.8/1.8 - TP, TPD 1-13/ DN 1 DN 1 285/57 286/575 315/62 336/625.9696/1.52.9696/1.52 TP, TPD 1-16/ DN 1 DN 1 32/63 31/631 3/693 36/681.9696/1.52.9696/1.52 TP, TPD 1-2/ DN 1 DN 1 33/663 336/675 38/71 386/756.9696/1.8.9696/1.8 TP, TPD 1-22/ DN 1 DN 1 376/755 375/753 33/813 25/8.9696/1.8.9696/1.8 TP, TPD 1-2/ DN 1 DN 1 392/786-9/8 -.9696/1.8 - TP 1-26/ DN 1 DN 1 385/- 388/- 558/- 561/- 2.3/- 2.3/- TP 1-28/ DN 1 DN 1 11/- - 655/- - 2.3/- - TP 1-3/ DN 1 DN 1 62/- - 632/- - 2.3/- - TP 1-39/ DN 1 DN 1 5/- - 79/- - 2.3/- - TP 2-18/ DN 2 DN 2 96/- - 669/- - 2.3/- - TP 2-22/ DN 2 DN 2 56/- - 719/- - 2.3/- - TP 2-2/ DN 2 DN 2 625/- - 79/- - 2.3/- - TP 2-27/ DN 2 DN 2 666/- - 835/- - 2.3/- - TP 2-32/ DN 2 DN 2 817/- - 116/- - 3.1/- - TP 2-33/ DN 2 DN 2 72/- - 923/- - 3.1/- - TP 2-36/ DN 2 DN 2 761/- - 96/- - 3.1/- - TP 2-/ DN 2 DN 2 911/- - 111/- - 3.1/- - TP 2-1/ DN 2 DN 2 935/- - 1133/- - 3.1/- - TP 2-7/ DN 2 DN 2 129/- - 1228/- - 3.1/- - TP 2-53/ DN 2 DN 2 1131/- - 136/- -.6/- - TP 2-59/ DN 2 DN 2 1331/- - 1563/- -.6/- - TP 2-66/ DN 2 DN 2 188/- - 172/- -.6/- - TP 2-28/ DN 2 DN 3 69/- - 875/- - 3.13/- - TP 2-31/ DN 2 DN 3 82/- - 15/- - 3.13/- - TP 2-39/ DN 2 DN 3 935/- - 112/- - 3.13/- - The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. 122

Weights and shipping volume TP, TPD, TPE, TPED TP, TPD, 6-pole, PN 6, 1, 16 Connection Weights Pump type D1 D D1 S Shipping volume [m 3 ] Net [kg] Gross [kg] TP/TPD TPE/TPED TP/TPD TPE/TPED TP/TPD TPE/TPED TP, TPD 125-6/6 DN 125 DN 125 157/31-187/391 -.9696/1.52 - TP, TPD 125-7/6 DN 125 DN 125 166/359-196/9 -.9696/1.52 - TP, TPD 125-9/6 DN 125 DN 125 23/69-26/519 -.9696/1.52 - TP, TPD 125-11/6 DN 125 DN 125 237/82-267/533 -.9696/1.52 - TP, TPD 125-1/6 DN 125 DN 125 2/96-27/56 -.9696/1.52 - TP, TPD 125-17/6 DN 125 DN 125 28/567-31/618 -.9696/1.52 - TP, TPD 1-6/6 DN 1 DN 1 229/61-259/512 -.9696/1.52 - TP, TPD 1-7/6 DN 1 DN 1 253/8-283/558 -.9696/1.52 - TP, TPD 1-9/6 DN 1 DN 1 259/522-289/572 -.9696/1.52 - TP, TPD 1-11/6 DN 1 DN 1 265/53-295/58 -.9696/1.52 - The dimension before the slash applies to the single-head pump, and the dimension after the slash applies to the twin-head pump. TP, 2-pole, PN 25 Pump type Connection Weights Shipping volume D1 [m 3 D D1 S Net [kg] Gross [kg] ] TP 1-62/2 DN 1 DN 125 25 58 2.29 TP 1-7/2 DN 1 DN 125 75 63 2.29 TP 1-82/2 DN 1 DN 125 58 735 2.29 TP 1-96/2 DN 1 DN 125 675 8 3.13 TP 1-1/2 DN 1 DN 125 73 915 3.13 TP 1-118/2 DN 1 DN 125 8 125 3.13 TP 1-1/2 DN 1 DN 125 115 12 3.13 TP 1-153/2 DN 1 DN 125 11 1325 3.13 TP 1-168/2 DN 1 DN 125 128 1.57 TP, -pole, PN 25 Pump type Connection Weights Shipping volume D1 [m 3 D D1 S Net [kg] Gross [kg] ] TP 1-19/ DN 1 DN 125 227 257.72 TP 1-22/ DN 1 DN 125 237 267.72 TP 1-26/ DN 1 DN 125 26 29.72 TP 1-27/ DN 1 DN 125 325 358.7 TP 1-32/ DN 1 DN 125 3 377.7 TP 1-38/ DN 1 DN 125 38 13.7 TP 1-2/ DN 1 DN 125 5 38.7 TP 125-1/ DN 125 DN 1 257 29.7 TP 125-2/ DN 125 DN 1 28 313.7 TP 125-2/ DN 125 DN 1 299 332.7 TP 125-28/ DN 125 DN 1 299 332.7 TP 125-31/ DN 125 DN 1 33.7 TP 125-37/ DN 125 DN 1 25 58.7 TP 125-3/ DN 125 DN 1 69 62 2.29 TP 1-2/ DN 1 DN 2 595 2.29 TP 1-27/ DN 1 DN 2 65 62 2.29 TP 1-32/ DN 1 DN 2 9 66 2.29 TP 1-3/ DN 1 DN 2 575 73 2.29 TP 1-3/ DN 1 DN 2 655 81 2.29 TP 1-53/ DN 1 DN 2 785 97 3.13 TP 1-6/ DN 1 DN 2 9 185 3.13 TP 2-26/ DN 2 DN 2 56 719 2.29 TP 2-28/ DN 2 DN 2 63 785 2.29 TP 2-38/ DN 2 DN 2 67 825 2.29 TP 2-2/ DN 2 DN 2 8 985 3.13 TP 2-/ DN 2 DN 2 86 15 3.13 123

Weights and shipping volume TP, TPD, TPE, TPED Pump type Connection Weights Shipping volume D1 [m 3 D D1 S Net [kg] Gross [kg] ] TP 2-51/ DN 2 DN 2 975 116 3.13 TP 2-56/ DN 2 DN 2 175 126 3.13 TP 2-62/ DN 2 DN 2 121 13.57 TP 2-27/ DN 2 DN 3 78 965 3.13 TP 2-32/ DN 2 DN 3 91 195 3.13 TP 2-37/ DN 2 DN 3 125 121 3.13 TP 2-9/ DN 2 DN 3 1225 15.57 TP 2-5/ DN 2 DN 3 136 158.57 TP 2-6/ DN 2 DN 3 1515 1735.57 TP 2-66/ DN 2 DN 3 1655 1875.57 TP 3-59/ DN 3 DN 3 1935 225 5.88 TP 3-67/ DN 3 DN 3 193 22 5.88 TP 3-7/ DN 3 DN 3 213 2 5.88 TP -7/ DN DN 37 1 1.76 TP -51/ DN DN 1 5 1.76 TP -5/ DN DN 2 6 1.76 TP -67/ DN DN 8 1.76 TP -72/ DN DN 5 1.76 TP -76/ DN DN 52 56 1.76 12

Accessories TP, TPD, TPE, TPED Unions and valves Cast-iron pumps A union kit consists of two cast-iron union tails, two cast-iron union nuts and two EPDM gaskets. Pump type, union connection Pressure stage TP, TPE 25 R PN 1 TP, TPE 32 R PN 1 Size A valve kit consists of two brass valves, two brass union nuts and two EPDM gaskets. The valve housing is of pressure die-cast brass. Product number Rp 3/ 529921 Rp 1 529922 Rp 1 1/ 52992 Rp 1 9921 Rp 1 1/ 9922 Pump type, valve connection Pressure stage Size Bronze pumps A union kit consists of two bronze union tails, two brass union nuts and two EPDM gaskets. The valve housing is of pressure die-cast brass. Product number Rp 3/ 51985 TP, TPE 25 R PN 1 Rp 1 51986 Rp 1 1/ 51987 TP, TPE 32 R PN 1 Rp 1 1/ 5539 Pump type, union connection Pressure stage Size A valve kit consists of two brass valves, two brass union nuts and two EPDM gaskets. The valve housing is of pressure die-cast brass. Product number Rp 3/ 529971 TP, TPE 25 R B PN 1 Rp 1 529972 TP, TPE 32 R B PN 1 Rp 1 1/ 9971 Pump type, valve connection Pressure stage Size Product number Rp 3/ 51985 TP, TPE 25 R B PN 1 Rp 1 51986 Rp 1 1/ 51987 TP, TPE 32 R B PN 1 Rp 1 1/ 5539 125

Accessories TP, TPD, TPE, TPED Counter flanges Cast-iron pumps A flange kit consists of two steel flanges, two gaskets of asbestos-free material IT 2, and the requisite number of bolts. Counter flange Pump type Description Rated pressure Pipework connection Product number Threaded 1 bar, EN 192-2 Rp 1 1/ 53973 Threaded Rp 1¼ For welding ø19 ø78 ø1 ø1 TM3 78 52 TP, TPE 32 TPD, TPED 32 For welding 1 bar, EN 192-2 32 mm, nominal 5397 Threaded 16 bar, EN 192-2 Rp 1 1/ 53973 For welding 16 bar, EN 192-2 32 mm, nominal 5397 Threaded 1 bar, EN 192-2 Rp 1 1/2 53971 Threaded Rp 1½ For welding ø19 ø88 ø11 ø1 TM3 79 52 TP, TPE TPD, TPED For welding 1 bar, EN 192-2 mm, nominal 53972 Threaded 16 bar, EN 192-2 Rp 1 1/2 53971 For welding 16 bar, EN 192-2 mm, nominal 53972 Threaded 1 bar, EN 192-2 Rp 2 5981 Threaded Rp 2 For welding ø19 ø12 ø125 ø165 TM3 8 52 TP, TPE TPD, TPED For welding 1 bar, EN 192-2 mm, nominal 5982 Threaded 16 bar, EN 192-2 Rp 2 5981 For welding 16 bar, EN 192-2 mm, nominal 5982 Threaded 1 bar, EN 192-2 Rp 2 1/2 55981 Threaded Rp 2½ For welding ø19 ø122 ø15 ø185 TM3 81 52 TP, TPE 65 TPD, TPED 65 For welding 1 bar, EN 192-2 65 mm, nominal 55982 Threaded 16 bar, EN 192-2 Rp 2 1/2 55981 For welding 16 bar, EN 192-2 65 mm, nominal 55982 126

Accessories TP, TPD, TPE, TPED Counter flange Pump type Description Rated pressure Pipework connection Product number Threaded 6 bar, EN 192-2 Rp 3 56992 Rp 3 ø19 For welding 6 bar, EN 192-2 8 mm, nominal 56991 Threaded For welding ø138 ø16 ø2 TM3 82 52 TP, TPE 8 TPD, TPED 8 Threaded 1 bar, EN 192-2 Rp 3 56982 For welding 1 bar, EN 192-2 8 mm, nominal 56981 Threaded 16 bar, EN 192-2 Rp 3 56982 For welding 16 bar, EN 192-2 8 mm, nominal 56981 Threaded 6 bar, EN 192-2 Rp 57991 Rp ø19 For welding 6 bar, EN 192-2 1 mm, nominal 57992 Threaded For welding ø158 ø18 ø22 TM3 83 52 TP, TPE 1 TPD, TPED 1 Threaded 1 bar, EN 192-2 Rp 57981 For welding 1 bar, EN 192-2 1 mm, nominal 57982 Threaded 16 bar, EN 192-2 Rp 57981 For welding 16 bar, EN 192-2 1 mm, nominal 57982 Threaded 1 bar, EN 192-2 Rp 5 85367 Threaded Rp 5 For welding ø19 ø188 ø21 ø2 TM3 8 52 TP, TPE 125 TPD, TPED 125 For welding 1 bar, EN 192-2 125 mm, nominal 85368 Threaded 16 bar, EN 192-2 Rp 5 85367 For welding 16 bar, EN 192-2 125 mm, nominal 85368 For welding ø23 ø212 ø2 ø285 TM3 85 52 TP, TPE 1 TPD, TPED 1 For welding 1 bar, EN 192-2 For welding 16 bar, EN 192-2 1 mm, nominal 1 mm, nominal S11116 S11116 127

Accessories TP, TPD, TPE, TPED Bronze pumps A flange kit consists of two bronze flanges, two gaskets of asbestos-free material IT 2, and the requisite number of bolts. Counter flange Pump type Description Rated pressure Pipework connection Product number Threaded 1 bar, EN 192-2 Rp 1 1/ 962729 Rp 1¼ ø19 TP, TPE 32 B For welding 1 bar, EN 192-2 32 mm, nominal 96273 Threaded For welding ø78 ø1 ø1 TM3 78 52 Threaded 16 bar, EN 192-2 Rp 1 1/ 962729 For welding 16 bar, EN 192-2 32 mm, nominal 96273 Threaded 1 bar, EN 192-2 Rp 1 1/2 539711 Threaded Rp 1½ For welding ø19 ø88 ø11 ø1 TM3 79 52 TP, TPE B For welding 1 bar, EN 192-2 mm, nominal 539712 Threaded 16 bar, EN 192-2 Rp 1 1/2 539711 For welding 16 bar, EN 192-2 mm, nominal 539712 Rp 2 ø19 Threaded 1 bar, EN 192-2 Rp 2 59811 Threaded For welding ø12 ø125 ø165 TM3 8 52 TP, TPE B For welding 1 bar, EN 192-2 mm, nominal 59812 Rp 2½ ø19 Threaded 1 bar, EN 192-2 Rp 2 1/2 559811 Threaded For welding ø122 ø15 ø185 TM3 81 52 TP, TPE 65 B For welding 1 bar, EN 192-2 65 mm, nominal 559812 Threaded 6 bar, EN 192-2 Rp 3 965735 Rp 3 Threaded For welding ø19 ø138 ø16 ø2 TM3 82 52 TP, TPE 8 B For welding 6 bar, EN 192-2 8 mm, nominal 569911 Threaded 1 bar, EN 192-2 Rp 3 569812 For welding 1 bar, EN 192-2 8 mm, nominal 569811 Rp ø19 Threaded 6 bar, EN 192-2 Rp 965737 Threaded For welding ø158 ø18 ø22 TM3 85 52 TP, TPE 1 B Threaded 1 bar, EN 192-2 Rp 965738 128

Accessories TP, TPD, TPE, TPED Base plates Note: Base plates are supplied as standard with TP, TPD, TPE, TPED pumps with 11 kw motors and above. TP, TPE Series 1 and 2 Pump type TP, TPE 32 TP, TPE TP, TPE TP 65-6/2 TP, TPE 65-12/2 TP 65-18/2 TP 65-3/ TP, TPE 65-6/ TP, TPE 8 TP, TPE 1 Hexagon head screws Product number 2 x M12 x 2 mm 965915 2 x M16 x 3 mm 96591 TP, TPE Series 3 Pump type TP, TPE 8-2/ TP, TPE 8-27/ TP, TPE 8-3/ TP, TPE 1-2/2 TP, TPE 1-31/2 TP, TPE 1-36/2 TP, TPE 1-39/2 TP, TPE 1-8/2 TP, TPE 1-xx/ TP, TPE 125-xx/ TP, TPE 1-xx/ TP, TPE 125-xx/6 TP, TPE 1-xx/6 Drawing Hexagon head screws Product number 2 x M16 x 3 mm 9653626 Product number Except TPE 32-9. Drawing Product number 38 29 23 35 235 195 2xø18 35 xø1 9653626 195 8 TP, TPE Series 3 Pump type 12 2 TP, TPE 32 TP, TPE TP, TPE TP, TPE 65 TP, TPE 8-xx/2 TP, TPE 8-7/ TP, TPE 8-9/ TP, TPE 8-11/ TP, TPE 8-1/ TP, TPE 8-17/ TP, TPE 1-16/2 TP, TPE 1-2/2 TP, TPE 1-2/2 2xø1 2xø1 16 2xø18 xø1 Hexagon head screws TM 9835 97 965915 96591 Product number 2 x M16 x 3 mm 831 29 TPD, TPED Series 3 Pump type TPD, TPED 32 TPD, TPED TPD, TPED TPD, TPED 65 TPD, TPED 8-xx/2 TPD, TPED 8-7/ TPD, TPED 8-9/ TPD, TPED 8-11/ TPD, TPED 8-1/ TPD, TPED 8-17/ TPD, TPED 1-16/2 TPD, TPED 1-2/2 TPD, TPED 1-2/2 Drawing xø18 TM2 8869 1 Hexagon head screws Product number x M16 x 3 mm 9689381 Product number Drawing Product number 35 235 195 2xø1 35 175 2xø18 9689381 195 96 2xø18 1 xø1 TM 3755 262 831 3 33 7 67 2xø1 TM2 5336 262 129

Accessories TP, TPD, TPE, TPED TPD, TPED Series 3 Pump type TPD, TPED 1-2/2 TPD, TPED 1-31/2 TPD, TPED 1-36/2 TPD, TPED 1-39/2 TPD, TPED 1-7/ TPD, TPED 1-9/ TPD, TPED 1-11/ TPD, TPED 1-13/ TPD, TPED 1-17/ Hexagon head screws Product number x M16 x 3 mm 9653627 Drawing Product number 23 2xø18 9653627 355 385 7 35 67 2xø1 TM2 887 1 TPD, TPED Series 3 Pump type TPD, TPED 8-2/ TPD, TPED 8-27/ TPD, TPED 8-3/ TPD, TPED 1-2/ TPD, TPED 1-2/ TPD, TPED 1-33/ TPD, TPED 1-37/ TPD, TPED 1-1/ TPD, TPED 125-xx/ TPD, TPED 1-xx/ Hexagon head screws Product number x M16 x 3 mm 9653628 Drawing Product number 35 3 3 xø18 9653628 75 5 7 67 2xø1 TM2 8871 1 13

Accessories TP, TPD, TPE, TPED Blanking flanges Normally used with twin-head pumps. TM 636 395 TPD, TPED, 2-pole Pump type 58 5655 969569 9695695 9695696 96525962 96525963 9652596 TPD, TPED 32-6/2 TPD, TPED 32-12/2 TPD, TPED 32-1/2 TPD, TPED 32-18/2 TPD, TPED 32-23/2 TPD, TPED 32-2/2 TPD, TPED 32-2/2 TPD, TPED 32-32/2 TPD, TPED 32-38/2 TPD, TPED 32-6/2 TPD, TPED 32-58/2 TPD, TPED -6/2 TPD, TPED -12/2 TPD, TPED -19/2 TPD, TPED -23/2 TPD, TPED -27/2 TPD, TPED -2/2 TPD, TPED -3/2 TPD, TPED -36/2 TPD, TPED -7/2 TPD, TPED -58/2 TPD, TPED -6/2 TPD, TPED -12/2 TPD, TPED -18/2 TPD, TPED -16/2 TPD, TPED -19/2 TPD, TPED -2/2 TPD, TPED -29/2 TPD, TPED -36/2 TPD, TPED -3/2 TPD, TPED -/2 TPD, TPED -57/2 TPD, TPED -71/2 TPD, TPED -83/2 TPD, TPED -9/2 131

Accessories TP, TPD, TPE, TPED Pump type 58 5655 969569 9695695 9695696 96525962 96525963 9652596 TPD, TPED 65-6/2 TPD, TPED 65-12/2 TP, TPD 65-18/2 TPD, TPED 65-19/2 TPD, TPED 65-23/2 TPD, TPED 65-26/2 TPD, TPED 65-3/2 TPD, TPED 65-1/2 TPD, TPED 65-3/2 TPD, TPED 65-1/2 TPD, TPED 65-6/2 TPD, TPED 65-5/2 TPD, TPED 65-66/2 TPD, TPED 65-72/2 TPD 65-93/2 TPD, TPED 8-12/2 TPD, TPED 8-1/2 TPD, TPED 8-18/2 TPD, TPED 8-21/2 TPD, TPED 8-2/2 TPD, TPED 8-2/2 TPD, TPED 8-33/2 TPD, TPED 8-/2 TPD, TPED 8-52/2 TPD, TPED 8-57/2 TP, TPD 8-7/2 TPD, TPED 1-12/2 TPD, TPED 1-16/2 TPD, TPED 1-2/2 TPD, TPED 1-2/2 TPD, TPED 1-2/2 TPD, TPED 1-31/2 TPD, TPED 1-36/2 TPD, TPED 1-39/2 TP, TPD 1-8/2 132

Accessories TP, TPD, TPE, TPED TPD, TPED, -pole Pump type 58 5655 969569 9695695 9695696 96525962 96525963 9652596 TPD, TPED 32-3/ TPD, TPED 32-/ TPD, TPED 32-6/ TPD, TPED 32-8/ TPD, TPED 32-1/ TPD, TPED 32-12/ TPD, TPED -3/ TPD, TPED -9/ TPD, TPED -1/ TPD, TPED -13/ TPD, TPED -16/ TPD, TPED -3/ TPD, TPED -6/ TPD, TPED -9/ TPD, TPED -11/ TPD, TPED -13/ TPD, TPED -16/ TPD, TPED -19/ TPD, TPED -23/ TPD, TPED 65-3/ TPD, TPED 65-6/ TPD, TPED 65-9/ TPD, TPED 65-11/ TPD, TPED 65-13/ TPD, TPED 65-1/ TPD, TPED 65-17/ TPD, TPED 65-2/ TPD, TPED 8-3/ TPD, TPED 8-6/ TPD, TPED 8-7/ TPD, TPED 8-9/ TPD, TPED 8-11/ TPD, TPED 8-1/ TPD, TPED 8-17/ TPD, TPED 8-2/ TPD, TPED 8-27/ TPD, TPED 8-3/ TPD, TPED 1-3/ TPD, TPED 1-6/ TPD, TPED 1-7/ TPD, TPED 1-9/ TPD, TPED 1-11/ TPD, TPED 1-13/ TPD, TPED 1-17/ TPD, TPED 1-2/ TPD, TPED 1-2/ TPD, TPED 1-33/ TPD, TPED 1-37/ TPD, TPED 1-1/ TPD, TPED 125-11/ TPD, TPED 125-13/ TPD, TPED 125-16/ TPD, TPED 125-21/ TPD, TPED 125-2/ TPD, TPED 125-32/ TPD, TPED 125-36/ TPD 125-2/ 133

Accessories TP, TPD, TPE, TPED Pump type 58 5655 969569 9695695 9695696 96525962 96525963 9652596 TPD, TPED 1-13/ TPD, TPED 1-16/ TPD, TPED 1-2/ TPD, TPED 1-22/ TPD, TPED 1-2/ TPD, 6-pole Pump type 58 5655 969569 9695695 9695696 96525962 96525963 9652596 TP, TPD 125-6/6 TP, TPD 125-7/6 TP, TPD 125-9/6 TP, TPD 125-11/6 TP, TPD 125-1/6 TP, TPD 125-17/6 TP, TPD 1-6/6 TP, TPD 1-7/6 TP, TPD 1-9/6 TPD 1-11/6 13

Accessories TP, TPD, TPE, TPED Insulating kits Insulating kits are only available for TP, TPE Series 2 pumps. An insulating kit consists of two or three insulating covers made of expanded polypropylene (EPP). The insulating kit is tailored to the individual pump model and has an insulating thickness corresponding to the nominal diameter of the pump. The thermal conductivity of EPP is very low (. W/m C), i.e. the insulating property is very good. The insulating kit encloses the entire pump housing. Fig. 1 Insulating kit TM 895 296 Product numbers of insulating kits Single-head TP, TPE Series 2 pumps Pump type Product number TP, TPE 32-3/ 965871 TP, TPE 32-/ 96588 TP, TPE 32-6/2 965873 TP, TPE 32-6/ 96588 TP, TPE 32-12/2 965873 TP, TPE 32-1/2 96588 TP, TPE 32-18/2 96588 TP, TPE 32-23/2 96588 TP, TPE -3/ 96587 TP, TPE -6/ 965875 TP, TPE -6/2 965876 TP, TPE -9/ 96588 TP, TPE -12/2 965877 TP, TPE -18/2 965878 TP, TPE -19/2 96588 TP, TPE -23/2 96588 TP, TPE -27/2 96588 TP, TPE -3/ 965879 TP, TPE -6/2 965881 TP, TPE -6/ 96588 TP, TPE -12/2 965882 TP, TPE -18/2 965883 TP, TPE 65-3/ 96588 TP, TPE 65-6/2 965886 TP, TPE 65-6/ 965885 TP, TPE 65-12/2 965887 TP, TPE 65-18/2 965888 TP, TPE 8-3/ 965889 TP, TPE 8-6/ 96589 TP, TPE 8-12/2 965891 TP, TPE 1-3/ 965892 TP, TPE 1-6/ 965892 135

Accessories TP, TPD, TPE, TPED Sensors Accessory Type Supplier Measuring range Product number Flowmeter Flowmeter Flowmeter Note: All sensors have -2 ma output signal. Sensors for boosting applications Sensors for circulation applications SITRANS F M MAGFLO MAG 31/ W SITRANS F M MAGFLO MAG 31/ W SITRANS F M MAGFLO MAG 31/ W Siemens 1-5 m 3 /h (DN 25) ID8285 Siemens 3-1 m 3 /h (DN ) ID8286 Siemens 6-3 m 3 /h (DN 65) ID8287 Flowmeter SITRANS F M MAGFLO MAG 31/ W Siemens 2-75 m 3 /h (DN 1) ID8288 Temperature sensor TTA () 25 Carlo Gavazzi C to +25 C 9632591 Temperature sensor TTA (-25) 25 Carlo Gavazzi -25 C to +25 C 96319 Temperature sensor TTA () 1 Carlo Gavazzi C to +1 C 9632592 Temperature sensor TTA () 1 Carlo Gavazzi C to +1 C 963195 Accessory for temperature sensor. All with 1/2 RG connection. Protecting tube 9 x mm Carlo Gavazzi 96321 Protecting tube 9 x 1 mm Carlo Gavazzi 96322 Cutting ring bush Carlo Gavazzi 96323 Temperature sensor, ambient temperature WR 52 tmg (DK: Plesner) - C to + C ID8295 Differential temperature sensor ETSD Honsberg C to +2 C 969362 Differential temperature sensor ETSD Honsberg C to + C 969363 Danfoss pressure sensor kit Pressure range Product number Connection: G 1/2 A (DIN 16288 - B6kt) Electrical connection: plug (DIN 36) Pressure sensor, type MBS 3, with 2 m screened cable Connection: G 1/ A (DIN 16288 - B6kt) 5 cable clips (black) Fitting instructions PT (212) - 2.5 bar 9678188 - bar 917275-6 bar 917276-1 bar 917277-16 bar 917278-2.5 bar 5159 - bar 516-6 bar 5161-1 bar 5162-16 bar 5163 Grundfos differential pressure sensor, DPI Pressure range Product number 1 sensor incl..9 m screened cable (7/16" connections) 1 original DPI bracket (for wall mounting) 1 Grundfos bracket (for mounting on motor) 2 M screws for mounting of sensor on bracket 1 M6 screw (self-cutting) for mounting on MGE 9/1 1 M8 screw (self-cutting) for mounting on MGE 112/132 1 M1 screw (self-cutting) for mounting on MGE 16 1 M12 screw (self-cutting) for mounting on MGE 18 3 capillary tubes (short/long) 2 fittings (1/" - 7/16") 5 cable clips (black) Installation and operating instructions Service kit instruction Fitting kit for TPED with two sensors -.6 bar 96611522-1. bar 96611523-1.6 bar 9661152-2.5 bar 96611525 -. bar 96611526-6. bar 96611527-1 bar 966115 96911 Select the differential pressure sensor so that the maximum pressure of the sensor is higher than the maximum differential pressure of the pump. 136

Accessories TP, TPD, TPE, TPED Potentiometer Potentiometer for setpoint setting and start/stop of the pump. CIU communication interface units Product External potentiometer with cabinet for wall mounting. Product number 62568 R1 The R1 is used for wireless communication. Communication takes place by means of infrared light. Product Product number R1 96615297 Fig. 2 Grundfos CIU communication interface unit The CIU units enable communication of operating data, such as measured values and setpoints, between TPE pumps and a building management system. The CIU unit incorporates a 2-2 V/VDC power supply module and a CIM module. It can either be mounted on a DIN rail or on a wall. We offer the following CIU units: GrA 6118 CIU 1 For communication via LON. CIU 1 For communication via Profibus DP. CIU 2 For communication via Modbus RTU. CIU 2 For wireless communication via GSM/GPRS. CIU 3 For communication via Bnet MS/TP. Description Fieldbus protocol Product number CIU 1 LON 96753735 CIU 1 Profibus DP 9675381 CIU 2 Modbus RTU 9675382 CIU 2 GSM/GPRS 9678716 CIU 3 Bnet MS/TP Contact Grundfos For further information about data communication via CIU units and fieldbus protocols, see the CIU documentation available in WebCAPS. 137

Accessories TP, TPD, TPE, TPED CIM communication interface modules EMC filter EMC (electromagnetic compatibility to EN 618-3) Fig. 3 Grundfos CIM communication interface module The CIM modules enable communication of operating data, such as measured values and setpoints, between TPE pumps of 11-22 kw and a building management system. The CIM modules are add-on communication modules which are fitted in the terminal box of TPE pumps of 11-22 kw. Note: CIM modules must be fitted by authorised personnel. We offer the following CIM modules: CIM 1 For communication via LON. CIM 1 For communication via Profibus DP. GrA6121 Motor 2-pole -pole.37.37.55.55.75.75 1.1 1.1 1.5 1.5 2.2 2.2 3. 3... 5.5-7.5 - - 5.5-7.5 11 11 15 15 18.5 18.5 22 - Emission/immunity Emission: Motors may be installed in residential areas (first environment), unrestricted distribution, corresponding to CISPR11, group 1, class B. Immunity: Motors fulfil the requirements for both the first and second environment. Emission: The motors are category C3, corresponding to CISPR11, group 2, class A, and may be installed in industrial areas (second environment). If fitted with an external Grundfos EMC filter, the motors are category C2, corresponding to CISPR11, group 1, class A, and may be installed in residential areas (first environment). TM2 9198 123 CIM 2 For communication via Modbus RTU. CIM 2 For wireless communication via GSM/GPRS. CIM 3 For communication via Bnet MS/TP. Fig. EMC filter The EMC filter for residential areas is available as a complete kit ready for installation. Product Product number EMC filter (TPE 5.5 kw and 7.5 kw, -pole) 9617 EMC filter (TPE 11-22 kw) 967839 Description Fieldbus protocol Product number CIM 1 LON 9682797 CIM 1 Profibus DP 9682793 CIM 2 Modbus RTU 9682796 CIM 2 GSM/GPRS 9682795 CIM 3 Bnet MS/TP Contact Grundfos For further information about data communication via CIM modules and fieldbus protocols, see the CIM documentation available in WebCAPS. 138

Minimum inlet pressure - NPSH TP, TPD, TPE, TPED To ensure optimum and noiseless operation, we recommend the minimum inlet pressure values shown on pages 1 to 12. A minimum inlet pressure is required to avoid pressure drop that may cause cavitation. The minimum inlet pressure (p s ) in bar relative (pressure gauge value on the pump suction side) can be calculated using the following formula. Note: Calculation of the minimum inlet pressure should be based on the maximum required flow. 1 p ( NPSH + H ) ρ g -- ρ c 2 S R S 2.1 p + p [ bar relative] b d p s = Minimum inlet pressure in bar. NPSH R = The required Net Positive Suction Head in metres head. (To be read from the NPSH curve at the highest flow the pump will be delivering). H s = Safety margin = minimum.5 metres head. Note: A safety margin of.5 metres prevents pressure drop. ρ = Density of the pumped liquid measured in kg/m 3. g = Gravitational acceleration measured in m/s. For estimated calculations use the value 9.81 m/s 2. c = Flow velocity of the pumped liquid at the pressure gauge. Insert the flow velocity as the unit [m/s]. (See individual curve charts from page 9). p b = Barometric pressure in bar. (Set the barometric pressure to.97 bar.) Note: Only occasionally the pressure is as high as 1 bar; this value is also at sea level. p d = Vapour pressure in bar. See fig. 5. c Ps NPSH Fig. 5 Minimum inlet pressure Temp. [ C] 1 1 13 12 11 1 9 8 7 6 3 2 1 P d [bar].76 3.61 2.7 1.99 1.3 1.1.7.7.31.2.12.7..2.1 TM2 891 2 - TM3 371 139

Minimum inlet pressure - NPSH TP, TPD, TPE, TPED TP, TPD, 2-pole, PN 6, 1, 16 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP 25-/2 R.1.1.1.8 1. 3.1 TP 25-9/2 R.1.1.1.8 1. 3.1 TP 32-/2 R.1.1.1.8 1. 3.1 TP 32-9/2 R.1.1.1.8 1. 3.1 TP, TPD 32-6/2.1.1.2 1. 1.5 3.2 TP, TPD 32-12/2.1.2.7 1.5 2. 3.7 TP, TPD 32-1/2.1.3.8 1.6 2.1 3.8 TP, TPD 32-18/2.5.7 1.2 2. 2.5.2 TP, TPD 32-23/2.7.9 1. 2.2 2.7. TP, TPD 32-2/2.1.1.2.9 1.5 3.1 TP, TPD 32-2/2.1.1.3 1. 1.6 3.2 TP, TPD 32-32/2.1.1.6 1.3 1.9 3.5 TP, TPD 32-38/2.1.2.7 1. 2. 3.6 TP, TPD 32-6/2.1.2.7 1. 1.9 3.6 TP, TPD 32-58/2.2..9 1.6 2.2 3.8 TP -/2.1.1.1.8 1. 3.1 TP, TPD -6/2.1.1.5 1.2 1.8 3.5 TP -9/2.1.1.1.8 1. 3.1 TP, TPD -12/2.1.1. 1.2 1.7 3. TP -18/2.1.2.7 1.5 2. 3.7 TP, TPD -19/2.1.3.8 1.6 2.1 3.8 TP, TPD -23/2.7.9 1. 2.2 2.7. TP, TPD -27/2.7.9 1. 2.2 2.7. TP, TPD -2/2.1.1. 1.1 1.7 3.3 TP, TPD -3/2.1.1. 1.1 1.6 3.3 TP, TPD -36/2.2..9 1.6 2.1 3.8 TP, TPD -7/2.1.1. 1.1 1.6 3.3 TP, TPD -58/2.2..9 1.6 2.1 3.8 TP, TPD -6/2.1.1. 1.1 1.7 3. TP, TPD -12/2.1.2.7 1.5 2. 3.7 TP, TPD -18/2.1.2.7 1. 2. 3.7 TP, TPD -16/2.1.1.1.8 1. 3. TP, TPD -19/2.1.1.1.9 1. 3. TP, TPD -2/2.1.1.1.8 1. 3. TP, TPD -29/2.1.1.2.9 1.5 3.1 TP, TPD -36/2.1.1.2 1. 1.5 3.1 TP, TPD -3/2.1.1. 1.1 1.6 3.2 TP, TPD -/2.1.1. 1.1 1.6 3.3 TP, TPD -57/2.1.3.8 1.6 2.1 3.7 TP, TPD -71/2.6.8 1.3 2. 2.6.2 TP, TPD -83/2.5.7 1.2 2. 2.5.1 TP, TPD -9/2 1. 1.2 1.7 2. 3..6 TP, TPD 65-6/2.1.3.8 1.5 2.1 3.8 TP, TPD 65-12/2.5.7 1.2 2. 2.5.2 TP, TPD 65-18/2.3.5 1. 1.8 2.3. TP, TPD 65-19/2.1.1.1.7 1.3 2.9 TP, TPD 65-23/2.1.1.1.8 1. 3. TP, TPD 65-26/2.1.1.1.8 1. 3. TP, TPD 65-3/2.1.1.2.9 1. 3.1 TP, TPD 65-1/2.1.1.2.9 1. 3.1 TP, TPD 65-6/2.1.1.2 1. 1.5 3.1 TP, TPD 65-5/2.1.1.3 1. 1.6 3.2 TP, TPD 65-66/2.1.1. 1.1 1.6 3.3 TP, TPD 65-72/2.1.1.6 1.3 1.9 3.5 TP, TPD 65-93/2.6.8 1.3 2. 2.6.2 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP, TPD 8-12/2 1.2 1. 1.9 2.7 3.2.9 TP, TPD 8-1/2.1.2.7 1. 1.9 3.6 TP, TPD 8-18/2.1.1.3 1.1 1.6 3.2 TP, TPD 8-21/2.1.1. 1.1 1.7 3.3 TP, TPD 8-2/2.1.1.6 1.3 1.8 3.5 TP, TPD 8-2/2.1.3.8 1.6 2.1 3.7 TP, TPD 8-33/2.1.2.7 1. 2. 3.6 TP, TPD 8-/2.2..9 1.7 2.2 3.8 TP, TPD 8-52/2.1.2.7 1. 1.9 3.6 TP, TPD 8-57/2.1.3.8 1.6 2.1 3.7 TP, TPD 8-7/2.6.8 1.3 2.1 2.6.2 TP, TPD 1-12/2 1.9 2.1 2.6 3. 3.9 5.6 TP, TPD 1-16/2.1.1.6 1.3 1.9 3.5 TP, TPD 1-2/2.1.1. 1.2 1.7 3.3 TP, TPD 1-2/2.1.1.5 1.3 1.8 3. TP, TPD 1-2/2.6.8 1.3 2. 2.5.2 TP, TPD 1-31/2.6.8 1.3 2. 2.6.2 TP, TPD 1-36/2.6.8 1.3 2. 2.6.2 TP, TPD 1-39/2 1. 1.2 1.7 2. 3..6 TP, TPD 1-8/2 1.5 1.7 2.2 2.9 3.5 5.1 1

Minimum inlet pressure - NPSH TP, TPD, TPE, TPED TP, TPD, -pole, PN 6, 1, 16 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP, TPD 32-3/.1.1.1.8 1. 3.1 TP, TPD 32-/.1.1.1.9 1. 3.1 TP, TPD 32-6/.1.1.3 1.1 1.6 3.3 TP, TPD 32-8/.1.1.1.5 1.1 2.7 TP, TPD 32-1/.1.1.1.5 1.1 2.7 TP, TPD 32-12/.1.1.1.6 1.1 2.7 TP, TPD -3/.1.1.2.9 1.5 3.2 TP -6/.1.1.1.8 1. 3.1 TP, TPD -9/.1.1.3 1. 1.6 3.3 TP, TPD -1/.1.1.2.9 1.5 3.1 TP, TPD -13/.1.1.1.7 1.2 2.8 TP, TPD -16/.1.1.2.9 1.5 3.1 TP, TPD -3/.1.1.1.9 1. 3.1 TP, TPD -6/.1.1.2.9 1.5 3.2 TP, TPD -9/.1.1.1.6 1. 2.8 TP, TPD -11/.1.1.1.6 1. 2.8 TP, TPD -13/.1.1.1.6 1.2 2.8 TP, TPD -16/.1.1.1.7 1.3 2.9 TP, TPD -19/.1.1.1.9 1. 3. TP, TPD -23/.1.1.1 1. 1.5 3.2 TP, TPD 65-3/.1.2.7 1.5 2. 3.7 TP, TPD 65-6/.2..9 1.6 2.2 3.9 TP, TPD 65-9/.1.1.1.6 1.1 2.7 TP, TPD 65-11/.1.1.1.6 1.1 2.7 TP, TPD 65-13/.1.1.1.6 1.1 2.8 TP, TPD 65-1/.1.1.1.6 1.2 2.8 TP, TPD 65-17/.1.1.1.6 1.2 2.8 TP, TPD 65-2/.1.1.1.8 1.3 2.9 TP, TPD 8-3/.8 1. 1.5 2.2 2.8.5 TP, TPD 8-6/.8 1. 1.5 2.3 2.8.5 TP, TPD 8-7/.1.1.1.8 1.3 2.9 TP, TPD 8-9/.1.1.1.7 1.2 2.8 TP, TPD 8-11/.1.1.1.8 1. 3. TP, TPD 8-1/.1.1.1.8 1.3 3. TP, TPD 8-17/.1.1.2 1. 1.5 3.1 TP, TPD 8-2/.1.1.3 1. 1.5 3.2 TP, TPD 8-27/.1.1.2.9 1.5 3.1 TP, TPD 8-3/.1.1.3 1.1 1.6 3.2 TP, TPD 1-3/.8 1. 1.5 2.2 2.8.5 TP, TPD 1-6/.6.8 1.3 2. 2.6.3 TP, TPD 1-7/.1.1.1.8 1.3 3. TP, TPD 1-9/.1.1.1.9 1. 3. TP, TPD 1-11/.1.1.2 1. 1.5 3.1 TP, TPD 1-13/.1.1.6 1.3 1.9 3.5 TP, TPD 1-17/.3.5 1. 1.7 2.3 3.9 TP, TPD 1-2/.1.1.5 1.2 1.8 3. TP, TPD 1-2/.1.2.7 1. 2. 3.6 TP, TPD 1-33/.3.5 1. 1.7 2.3 3.9 TP, TPD 1-37/.3.5 1. 1.7 2.3 3.9 TP, TPD 1-1/.5.7 1.2 1.9 2.5.1 TP, TPD 125-11/.1.1.1.9 1. 3. TP, TPD 125-13/.1.1.2.9 1.5 3.1 TP, TPD 125-16/.1.1.3 1. 1.5 3.2 TP, TPD 125-21/.1.1.3 1. 1.6 3.2 TP, TPD 125-2/.1.1. 1.1 1.7 3.3 TP, TPD 125-32/.1.1.3 1. 1.6 3.2 TP, TPD 125-36/.1.1. 1.2 1.7 3.3 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP, TPD 125-2/.1.2.7 1. 2. 3.6 TP, TPD 1-13/.1.1. 1.1 1.6 3.3 TP, TPD 1-16/.1.1. 1.1 1.7 3.3 TP, TPD 1-2/.1.1. 1.1 1.7 3.3 TP, TPD 1-22/.1.1.5 1.2 1.8 3. TP, TPD 1-2/.1.1.6 1.3 1.9 3.5 TP 1-26/.1.1.5 1.2 1.8 3. TP 1-28/.1.3.8 1.5 2.1 3.7 TP 1-3/.1.2.7 1.5 2. 3.6 TP 1-39/.1.2.7 1. 2. 3.6 TP 2-18/.1.1.5 1.3 1.8 3. TP 2-22/.1.1.6 1. 1.9 3.5 TP 2-2/.1.1.6 1. 1.9 3.5 TP 2-27/.1.1. 1.1 1.7 3.3 TP 2-32/.1.1.5 1.2 1.8 3. TP 2-33/.1.1.3 1.1 1.6 3.2 TP 2-36/.1.1.3 1.1 1.6 3.2 TP 2-/.1.1.3 1. 1.6 3.2 TP 2-1/.1.2.7 1. 1.9 3.6 TP 2-7/.1.1. 1.1 1.6 3.3 TP 2-53/.1.1. 1.1 1.7 3.3 TP 2-59/.1.2.7 1. 2. 3.6 TP 2-66/.2..9 1.7 2.2 3.8 TP 2-28/.1.1.1.8 1. 3.1 TP 2-31/.1.1.1.8 1. 3.1 TP 2-39/.1.1.1.8 1. 3.1 TP, TPD, 6-pole, PN 16 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP, TPD 125-6/6.1.1.1.7 1.2 2.8 TP, TPD 125-7/6.1.1.1.7 1.3 2.9 TP, TPD 125-9/6.1.1.1.7 1.2 2.9 TP, TPD 125-11/6.1.1.1.8 1.3 2.9 TP, TPD 125-1/6.1.1.1.7 1.3 2.9 TP, TPD 125-17/6.1.1.1.8 1. 3. TP, TPD 1-6/6.1.1.1.7 1.3 2.9 TP, TPD 1-7/6.1.1.1.7 1.3 2.9 TP, TPD 1-9/6.1.1.1.8 1.3 2.9 TP, TPD 1-11/6.1.1.1.8 1.3 3. TP Series, 2-pole, PN 25 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP 1-62/2.2..9 1.6 2.2 3.9 TP 1-7/2.1.2.7 1.5 2. 3.7 TP 1-82/2.1.2.7 1. 2. 3.7 TP 1-96/2.1.2.7 1. 2. 3.7 TP 1-1/2.1.1.6 1.3 1.9 3.6 TP 1-118/2.1.2.7 1.5 2. 3.7 TP 1-1/2.1.2.7 1.5 2. 3.7 TP 1-153/2.1.2.7 1. 2. 3.7 TP 1-168/2.1.1.6 1. 1.9 3.6 11

Minimum inlet pressure - NPSH TP, TPD, TPE, TPED TP Series, -pole, PN 25 Pump type p [bar] 2 C 6 C 9 C 11 C 12 C 1 C TP 1-19/.1.1.1.8 1. 3.1 TP 1-22/.1.1.1.8 1. 3.1 TP 1-26/.1.1.1.8 1. 3.1 TP 1-27/.1.1.1.8 1. 3.1 TP 1-32/.1.1.1.8 1. 3.1 TP 1-38/.1.1.1.8 1. 3.1 TP 1-2/.1.1.1.8 1. 3.1 TP 125-1/.1.1.1.8 1. 3.1 TP 125-2/.1.1.1.8 1. 3.1 TP 125-2/.1.1.1.8 1. 3.1 TP 125-28/.1.1.1.8 1. 3.1 TP 125-31/.1.1.1.8 1. 3.1 TP 125-37/.1.1.1.8 1. 3.1 TP 125-3/.1.1.1.8 1. 3.1 TP 1-2/.1.1.1.8 1. 3.1 TP 1-27/.1.1.1.8 1. 3.1 TP 1-32/.1.1.1.8 1. 3.1 TP 1-3/.1.1.1.8 1. 3.1 TP 1-3/.1.1.1.8 1. 3.1 TP 1-53/.1.1.1.8 1. 3.1 TP 1-6/.1.1.1.8 1. 3.1 TP 2-27/.1.1.1.8 1. 3.1 TP 2-28/.1.1.1.8 1. 3.1 TP 2-38/.1.1.1.8 1. 3.1 TP 2-2/.1.1.1.8 1. 3.1 TP 2-/.1.1.1.8 1. 3.1 TP 2-51/.1.1.1.8 1. 3.1 TP 2-56/.1.1.1.8 1. 3.1 TP 2-62/.1.1.1.8 1. 3.1 TP 2-27/.1.1.1.8 1. 3.1 TP 2-32/.1.1.1.8 1. 3.1 TP 2-37/.1.1.1.8 1. 3.1 TP 2-9/.1.1.1.8 1. 3.1 TP 2-5/.1.1.1.8 1. 3.1 TP 2-6/.1.1.1.8 1. 3.1 TP 2-66/.1.1.1.8 1. 3.1 TP 3-59/..6 1.1 1.8 2..1 TP 3-67/..6 1.1 1.8 2..1 TP 3-7/.3.5 1. 1.8 2.3. TP -7/.1.3.8 1.6 2.1 3.8 TP -51/.1.3.8 1.6 2.1 3.8 TP -5/.1.3.8 1.5 2.1 3.8 TP -67/.6.8 1.3 2.1 2.6.3 TP -72/.6.8 1.3 2.1 2.6.3 TP -76/.6.8 1.3 2. 2.6.3 12

Further product documentation TP, TPD, TPE, TPED WebCAPS WebCAPS is a Web-based Computer Aided Product Selection program available on www.grundfos.com. WebCAPS contains detailed information on more than 185, Grundfos products in more than 2 languages. In WebCAPS, all information is divided into six sections: Catalogue Literature Service Sizing Replacement C drawings. Catalogue This section is based on fields of application and pump types, and contains technical data curves (QH, Eta, P1,, etc.) which can be adapted to the density and viscosity of the pumped liquid and show the number of pumps in operation product photos dimensional drawings wiring diagrams quotation texts, etc. Literature In this section you can access all the latest documents of a given pump, such as data booklets installation and operating instructions service documentation, such as Service kit catalogue and Service kit instructions quick guides product brochures. Service This section contains an easy-to-use interactive service catalogue. Here you can find and identify service parts of both existing and discontinued Grundfos pumps. Furthermore, this section contains service videos showing you how to replace service parts. 13

1 Further product documentation TP, TPD, TPE, TPED Sizing This section is based on different fields of application and installation examples, and gives easy step-by-step instructions in how to select the most suitable and efficient pump for your installation carry out advanced calculations based on energy consumption, payback periods, load profiles, life cycle costs, etc. analyse your selected pump via the built-in life cycle cost tool determine the flow velocity in wastewater applications, etc. Replacement In this section you find a guide to selecting and comparing replacement data of an installed pump in order to replace the pump with a more efficient Grundfos pump. The section contains replacement data of a wide range of pumps produced by other manufacturers than Grundfos. Based on an easy step-by-step guide, you can compare Grundfos pumps with the one you have installed on your site. When you have specified the installed pump, the guide will suggest a number of Grundfos pumps which can improve both comfort and efficiency. C drawings In this section it is possible to download 2-dimensional (2D) and 3-dimensional (3D) C drawings of most Grundfos pumps. These formats are available in WebCAPS: 2-dimensional drawings:.dxf, wireframe drawings.dwg, wireframe drawings. 3-dimensional drawings:.dwg, wireframe drawings (without surfaces).stp, solid drawings (with surfaces).eprt, E-drawings. WinCAPS WinCAPS is a Windows-based Computer Aided Product Selection program containing detailed information on more than 185, Grundfos products in more than 2 languages. The program contains the same features and functions as WebCAPS, but is an ideal solution if no Internet connection is available. WinCAPS is available on CD-ROM and updated once ayear. Fig. 6 WinCAPS CD-ROM Subject to alterations. 1