IR-COOLED CHILLERS WITH SCROLL COMPRESSORS CLSS ENERGY EFFICIENCY MICROCHNNEL CONDENSING COILS HET RECOVERY OPTIONS 190-0 VILBLE IN 7 FRME SIZES, TOTL MODELS WITH WIDE SELECTION OF OPTIONS ND CCESSORIES SCROLL R10a WWW.KLTR.DE EC-FNS MICROCHNNEL HET RECOVERY
High-efficient chilled water production N EXCEPTIONLLY EFFICIENT IR-COOLED CHILLER RNGE OFFERING DIVERSE COOLING CPCITIES ND FETURING WIDE SELECTION OF OPTIONS, INCLUDING PRTIL ND TOTL HET RECOVERY. WITH ITS COMPCT ND RELIBLE SCROLL COMPRESSORS, MICROCHNNEL CONDENSERS, ND QUIET XIL FNS, IT'S THE PERFECT SOLUTION FOR IR CONDITIONING ND PROCESS COOLING PPLICTIONS. The benefits at a glance: ENERGY EFFICIENCY RTIO UP TO.0 ES UP TO.70 INTELLIGENT HED PRESSURE CONTROL WTER TEMPERTURES OF UP TO -1ºC LOW CONDENSING TEMPERTURES HET RECOVERY OPTIONS energy efficiency.5...1.70. ES OF UP TO Referring to 10/15ºC water temperature and 5ºC ambient temperature Referring to 7/1ºC water temperature and 5ºC ambient temperature S900 S5 S775 S750 S700 S50 S5 S00 S575 S550 S55 S75 P50 P5 P00 P75 P50 P00 P75 P50 P5 P00 Capacity () Microchannel condensers Enhanced heat transfer and low condensing temperature Microchannel condensers used in Lighstream Scroll design give a number of advantages, including higher heat transfer rate, low airside pressure drops, and closer approach temperatures. The end result is up to 0% higher energy efficiency in comparison to traditional fin/tube heat exchanger design. Smaller coil face, thin design, up to 50% less weight, and less refrigerant charge translate to lower system cost. Microchannel condensers used in chillers are true HVC coils developed and optimized especially for refrigeration applications and enable remarkable low condensing temperatures. Max-Reger-Str. 90571 Schwaig Germany +9(0)911 715 01
Leading fan technology Optimum air flow for partial load efficiency Lighstream Scroll s new generation fan system not only reduces power consumption by up to 0% while easily managing the extraordinary high volume flows it also works at much reduced operating noise. The smart fan system includes the unique fans with bionic wing concept, the most advanced EC motor technology, and multifunctional air diffusers, resulting in an extra economic efficiency for the customers. EC motor technology does not provide savings only during full-load operation - it is exactly when operating under partial load that EC motors lose much less of their efficiency. 100 75 50 EEV is controlled by a driver which regulates its opening according to the performance levels required by the system and guarantees the minimal overheating under all operating conditions. (%) The electronic expansion valve (EEV) reduces the need for high head pressure when running at part load and lower ambient conditions. EC fans C fans Savings 5 5% energy savings through the use of EEV Fan motors efficiency comparison irflow (%) 5 50 75 100 The control hub of chillers is a sophisticated controller and advanced software developed for efficient operation of the chillers based on scroll compressors. It manages and optimizes the chiller s performance, giving the complete control over the system for plant operator. Scroll compressors Proven performance and reliability Lighstream Scroll chillers are based on scroll compressors in tandem configuration, which offer part-load efficiency and increased load-matching capabilities, as well as quiet operation and diagnostic capabilities, and enable two-stage capacity by running compressors individually or simultaneously. Lightstream's refrigerant side consists of one to four gas circuits - depending on unit capacity, each equipped with electronic expansion valve (EEV) to ensure optimum system efficiency. Depending on their demands, customers can choose from partial or total heat recovery features installed on each gas circuit. Max-Reger-Str. 90571 Schwaig Germany +9(0)911 715 01
Evaporators chillers feature two different types of evaporators: brazed plate for models with refrigerant circuits and shell and tube for - and -circuits models. Brazed plate heat exchangers Brazing the stainless steel plates together eliminate the need for gaskets and thick frame plates, which makes the heat exchanger compact. The brazing material seals and holds the plates together at the contact points ensuring optimal heat transfer efficiency and pressure resistance. Using advanced design technologies and extensive verification guarantees the highest performance and longest possible service lifetime. Shell and tube heat exchangers With innovative refrigerant distributor and optimized plastic baffles designed to improve the brine side heat transfer performances, Lightstream s shell and tube evaporator guarantee maximum efficiency and compactness. The tubes have a specific inner grooved pattern to maximize the heat transfer coefficient and to limit the pressure drop negative effects. Package, options and accessories Description General nti-vibration mounts MCHE electrocoat High ambient kit nti-vibration springs MCHE thermoguard Low noise design (grades 1-) Soundproof compressor enclosures MCHE mesh guard Partial heat recovery system High-sided paneling - C brine kit Total heat recovery system Magnitothermic switches for compressors -1 C brine kit Buffer tank Pump(s) antifreeze heater Flowmeter Electronic expansion valves Service valve (compressor suction) Safety valves on high/low pressure sides Service valve (compressor discharge) Pressure indication on high/low pressure sides Thermal insulation EC fans High-efficient fan diffusers Waterside Pumping group (single/twin inline pumps) Refrigerant side irside C fans Electric and controls Touch screen HMI Phase monitoring relay Sequence management Electric panel heater BMS connectivity Compressor operation indication Compressor power factor capacitor SNMP connectivity Remote monitoring software Soft-start system Energy monitoring Pumping group control system Standard feature Optional feature s and model identification Evaporator type S V / F F F F Length 75 595 715 55 955 075 9195 P Brazed plate Width 50 50 50 50 50 50 50 S Shell and tube Height 15 15 15 15 15 15 15 Nominal capacity Condenser 00 W W-bank microchannel Condenser size No. of condenser banks No. of refrigerant circuits Max-Reger-Str. 90571 Schwaig Germany +9(0)911 715 01
Technical Specs Cooling capacity1 P00 P5 P50 P75 P00 P50 P75 P00 P5 P50 S75 V/ V/ V/ V/ V/ V/ V/ V/ V/ V/ V5/ 190 0 5 70 10 5 75 95 15 0 70 F F F F F F F F /.10.1.1.1.5.9.7.1.5.5.7.0...55 1910 190 10 0 90 70 0 70 90 10 0 5... 75.0 7. 99. 10. 11.0 11.1 1.1 10.0 99. 115.1 11.0 1.0 15.1 17.0 10. 0. 15..0 ES Net weight Compressors Scroll Capacity steps Fans C-type axial irflow 9 5000 5000 5000 17500 17500 17500 1500... 1.7 1.7 1.7 1.7 15. 15. 15.... 1. 1. 1. 1. 9.0 7.5 70. 75. Evaporator Water flow rate.5 7.5 0..5 5.0 59.0.0 Max flow rate 5. 5. 5. 5. 7.0. 9. 9.7 99. 105. 11.0 Water volume l 1. 15.1 15.1 1..0 0.0 1. 1. 1. 1.7 11.5 R10a Charge 1 0. 7. 7...... 1. (1) Coolant: Water 100%; Coolant temperatures: 7/1 C; mbient temperature: 5 C Cooling capacity1 S55 S550 S575 S00 S5 S50 S700 S750 S775 S5 S900 V5/ V5/ V5/ V/ V/ V/ V/ V7/ V7/ V/ V/ 55 50 55 590 15 55 90 75 770 0 0 F F F F F /.0.10.10.11.10.70.57.0..50.55..5.5.5.0 50 50 00 5150 5170 500 5570 70 510 590 0 15.0 15.0 1.0 170.0 175.0 1.0 00.0 1.0 5.0 7.0 5.0 5.0 70.0 0.0 9.0 01.0 0.0.0 70.0 5.0 0.0 0.0 ES Net weight Compressors Scroll Capacity steps Fans C-type axial irflow 9 10 10 1 1 1 1 1 1 1 1 1500 1500 1500 55000 55000 55000 55000 97500 97500 0000 0000.. 5. 5. 9.0 9.0 9.0.... 5. 5... Water flow rate 101.0 101.0 10.0 1.0 1.0 1.0 10.0 10.0 15.0 1.0 1.0 Max flow rate 15.0 15.0 15.0 10.0 10.0 17.0 17.0 Water volume l 1.7 1.7 1.7 0.5 0.5 0.5 1. 1. 1. 5.0 5.0 Evaporator R10a Charge..5.5 5. 5. 5. 5... 7.5 7.5 (1) Coolant: Water 100%; Coolant temperatures: 7/1 C; mbient temperature: 5 C MODELS VILBLE The development of Kaltra products and services is continuous and the information in this document may not be up to date. Please check the current position with Kaltra. Max-Reger-Str. 90571 Schwaig Germany +9(0)911 715 01