Plug-In Low Pass Filter 5Ω Maximum Ratings DC to 1 MHz Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power Input.5W max. Permanent damage may occur if any of these limits are exceeded. Pin Connections INPUT 1 OUTPUT 8 GROUND 2,3,4,5,6,7 CASE GROUND 2,3,4,5,6,7 Outline Drawing Features rugged welded case, hermetic other standard and custom PLP models available with wide selection of fco Applications test equipment lab use transmitters/receivers military/hi-rel applications PASSBAND Low Pass Filter Electrical Specifications fco Nom. STOPBAND (loss < 1 db) (loss 3 db) (loss > 2 db) (loss > 4 db) Passband Typ. VSWR (:1) Stopband Typ. DC-1 12 162-21 21-25 1.7 18 typical frequency response CASE STYLE: A1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications electrical schematic 8 Outline Dimensions ( ) at RF level of dbm INSERTION LOSS inch mm A B C D E F.77.8.385.4.37.4 19.56 2.32 9.78 1.16 9.4 1.16 G H J K wt.2.2.14.31 grams 5.8 5.8 3.56.79 5.2 5 AT T E NUAT ION, db at RF level of dbm 3 db 1 db 2 db 4 db DC.9 1 1.35 1.75 3 F R E QUE NC Y / F co RETURN LOSS Typical Performance Data Frequency Insertion Loss Return Loss Frequency Group Delay (db) (db) _ x σ (nsec) 1..3. 38.3 1..94 195..16.1 15.7 1..96 38..43.1 14. 195..95 565..24.1 19. 285..81 75..29.1 25.3 38..85 93..48.1 2.1 47..96 1..55.1 18.1 565. 1.7 118. 4.25 1.9 5.3 655. 1.11 12. 5.69 2.2 3.4 75. 1.12 13. 17.67 3..7 84. 1.16 142. 32.19 3.6.5 93. 1.43 15. 43.83 5.7.4 1. 1.6 155. 53.2 7.9.3 115. 2.81 16. 58.27 7.5.3 118. 2.36 162. 57.94 6.7.3 12. 2.49 169. 58.1 8.4.3 13. 1.15 172. 55.64 6.2.2 14..5 2. 58.68 3.8.2 142..64 25. 61.62 3.9.1 144. 1.9 27. 62.15 5.5.1 15..45 21. 62.95 5.6.1 155..84 211. 62.89 5..1 16. 1.32 212. 61.95 4.1.1 162. 1.6 213. 64.71 5.4.1 169. 1.59 214. 66.13 8.4.1 17. 1.1 215. 64.3 6.7.1 172..31 216. 65.1 7.9.1 1945. 1. 22. 65.98 8.1.1 2. 1.67 23. 7.5 9.9.1 25. 2.9 25. 65.98 4.1.1 27. 1.42 R F IN 5. at RF level of dbm GROUP DELAY R F OUT INSERTION LOSS (db) 64 48 32 16 RETURN LOSS (db) 4 3 2 1 GROUP DELAY (nsec) 4. 3. 2. 1. 1 1 1 1 1 FREQUENCY 1 1 1 1 1 FREQUENCY. 414 828 1242 1656 27 FREQUENCY Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Mini-Circuits www.minicircuits.com P.O. Box 35166, Brooklyn, NY 11235-3 (718) 934-45 sales@minicircuits.com REV. C M15117 15928
Plug-In Low Pass Filter Typical Performance Data FREQUENCY INSERTION LOSS RETURN LOSS FREQUENCY GROUP DELAY (db) (db) (nsec) 1.. 38.3 1..9 195..2 15.7 1. 1. 38..4 14. 195. 1. 565..2 19. 285..8 75..3 25.3 38..9 93..5 2.1 47. 1. 1..6 18.1 565. 1.1 118. 4.3 5.3 655. 1.1 12. 5.7 3.4 75. 1.1 13. 17.7.7 84. 1.2 142. 32.2.5 93. 1.4 15. 43.8.4 1. 1.6 155. 53.2.3 115. 2.8 16. 58.3.3 118. 2.4 162. 57.9.3 12. 2.5 169. 58..3 13. 1.2 172. 55.6.2 14..5 2. 58.7.2 142..6 25. 61.6.1 144. 1.1 27. 62.2.1 15..4 21. 63..1 155..8 211. 62.9.1 16. 1.3 212. 62..1 162. 1.1 213. 64.7.1 169. 1.6 214. 66.1.1 17. 1. 215. 64.3.1 172..3 216. 65.1.1 1945. 1. 22. 66..1 2. 1.7 23. 7.5.1 25. 2.1 25. 66..1 27. 1.4 REV. X1 6725 Page 1 of 1
Plug-In Low Pass Filter Typical Performance Curves Insertion Loss 1 2 Insertion Loss (db) 3 4 5 6 7 8 9 1 1 1 1 1 Frequency Return Loss 5 1 Return Loss (db) 15 2 25 3 35 4 45 5 1 1 1 1 Frequency 5. Group Delay 4.5 4. Group Delay (nsec) 3.5 3. 2.5 2. 1.5 1..5. 2 4 6 8 1 12 14 16 18 2 22 Frequency REV. X1 6725 Page 1 of 1
Case Style Outline Dimensions A A1 A4 A5 A6 CASE# A B C D E F G H J K A1.385.4 (9.78) (1.16) A4.2.21.77.8 (5.8) (5.33).37.4.2 A5 (19.56) (2.32).24.25 (9.4) (1.16) (5.8) (6.1) (6.35) A6.285.31 (7.24) (7.87) Dimensions are in inches (mm). Tolerances: 2 Pl. +.3; 3 Pl. +.15.2 (5.8).14 (3.56).31 (.79) WT, GRAM 5.2 3.7 3.7 5.2 Notes: 1. Header material: C.R.S. Pin material: #52 alloy. Cover material: Cupro-Nickel. 2. Pin finish: Electro Tin-Silver. 3. Insulated spacer available. Request P/N B14-45-1. 4. Tolerance on pin diameter +/-.5 inch. 5. Glass meniscus.15 inch max. 6. Blue bead indicates Pin 1. Pin numbers do not appear on unit, for reference only. 98-A Rev.: B (3/15/12) M13621 File: 98-A.doc Sheet 1 of 2 This document and its contents are the property of Mini-Circuits
Mini-Circuits Environmental Specifications ENV1 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature Storage Temperature -55 to 1 C Ambient Environment -55 to 1 C Ambient Environment Individual Model Data Sheet Individual Model Data Sheet Thermal Shock -55 to 1 C, 1 cycles MIL-STD-22, Method 17, Condition A-3, except +1 C Vibration (High Frequency) 2g peak, 1-2 Hz, 12 times in each of three perpendicular directions (total 36) MIL-STD-22, Method 24, Condition D Mechanical Shock 5g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-22, Method 213, Condition A Moisture Resistance 1 cycles, 24 hours per cycle MIL-STD-22, Method 16, Condition A, except 5 C and end point electrical test done within 12 hours Solderability 1X Magnification J-STD-2, 95% Coverage Resistance to Solder Heat 26 C for 1 seconds MIL-STD-22, Method 21, Condition B Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63 C to 7 C MIL-STD-22, Method 215 Terminal Strength 4 1/2 Pound Pull MIL-STD-22, Method 211, Condition A ENV1 Rev: OR 1/11/11 M15677 File: ENV1.pdf This document and its contents are the property of Mini-Circuits. Page: 1
Mini-Circuits Environmental Specifications ENV1 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Gross Leak 125 C Bubble Test MIL-STD-22, Method 112, Condition D Barometric Pressure 1, Feet MIL-STD-22, Method 15, Condition D ENV1 Rev: OR 1/11/11 M15677 File: ENV1.pdf This document and its contents are the property of Mini-Circuits. Page: 2