RDP-272+ DC to 2700 MHz (DC-950, MHz) The Big Deal Low insertion loss High isolation Miniature shielded package.

Size: px

Start display at page:

Download "RDP-272+ DC to 2700 MHz (DC-950, MHz) The Big Deal Low insertion loss High isolation Miniature shielded package."

Daniela Allison
5 years ago
Views:

1 Surface Mount Diplexer 5Ω DC to 27 MHz (DC-95, MHz) The Big Deal Low insertion loss High isolation Miniature shielded package CASE STYLE: CK65 Product Overview is a low-pass + high-pass combination device. Low pass port is designed for DC to 95 MHz and high pass port is designed for 17 to 27 MHz. This diplexer can be used in satellite systems, vehicle tracking, communication test sets and other multiband radio systems. Key Features Feature Advantages Low passband insertion loss Suitable for high performance application. Extended stopband rejection Spurious rejection and avoids using additional filters. Miniature shielded package Reduced interference with the surrounding components. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box 35166, Brooklyn, NY (718) sales@minicircuits.com Page 1 of 3

2 Surface Mount Diplexer 5Ω Maximum Ratings DC to 27 MHz (DC-95, MHz) Operating Temperature -C to 85 C Storage Temperature -55 C to C RF Power Input.5W at 25 C Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation Features Low insertion loss 5Ω Impedance Combination of Low pass and High pass filters Miniature shielded package Aqueous washable CASE STYLE: CK65 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Pin Connections HIGH PASS PORT 14 LOW PASS PORT COMMON PORT 2 GROUND 1,3-9,11-13,15,16 Outline Drawing PCB Land Pattern Suggested Layout, Tolerance to be within±.2 Applications Satellite systems Vehicle tracking Multiband radio systems Pass Band Stop Band Isolation Electrical Specifications at 25 C Parameter Port Min. Typ. Max. Unit Insertion Loss Return Loss Low Pass DC High Pass Low Pass DC High Pass Common Low Pass High Pass Typical Performance Data at 25 C DC DC DC db db db db FREQUENCY (MHz) INSERTION LOSS (db) RETURN LOSS (db) A L B M inch Outline Dimensions ( mm ) C N D P E Q F R G S H T J Demo Board MCL P/N: TB-+ Suggested PCB Layout (PL-12) K Wt. grams 1. Low Pass Port High Pass Port Common Port Low Pass Port High Pass Port Functional Schematic Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box 35166, Brooklyn, NY (718) sales@minicircuits.com REV.A M EDU1518 URJ Page 2 of 3

3 Performance Charts LOW PASS PORT INSERTION LOSS (Pin=dBm) LOW PASS PORT RETURN LOSS (Pin=dBm) Insertion Loss (db) Return Loss (db) HIGH PASS PORT INSERTION LOSS (Pin=dBm) HIGH PASS PORT RETURN LOSS (Pin=dBm) Insertion Loss (db) 6 8 Return Loss (db) CROSS OVER ISOLATION (Pin=dBm) Isolation (db) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at Mini-Circuits P.O. Box 35166, Brooklyn, NY (718) sales@minicircuits.com Page 3 of 3

4 Surface Mount Diplexer Typical Performance Data FREQUENCY (MHz) Low Pass port INSERTION LOSS (db) High Pass port CROSS OVER ISOLATION (db) (between LPF and HPF) RETURN LOSS Common port Low Pass port High Pass port (db) REV. OR 11/4/14 Page 1 of 1

5 Isolation (db) Return Loss (db) Insertion Loss (db) Return Loss (db) Insertion Loss (db) Return Loss (db) Surface Mount Diplexer Typical Performance Curves Low Pass Port Insertion Loss Low Pass Port Return Loss High Pass Port Insertion Loss High Pass Port Return Loss Cross over Isolation Common Port Return Loss REV. OR 11/4/14 Page 1 of 1

6 Case Style Outline Dimensions PCB Land Pattern CK CK65 Suggested Layout, Tolerance to be within.2 CASE # A B C D E F G H J K CK65 (12.7) (12.7) (4.57) (2.54) (2.3) (2.92) (1.52) (1.2) (13.72) (1.52) CASE # L M N P Q R S T WT. GRAM CK65 1. (2.54) (3.43) (3.43) (2.92) (3.56) (1.78) (3.81) (1.78) Dimensions are in inches (mm). Tolerances: 2 Pl. +.3; 3Pl..15 Notes: 1. Case material: Nickel-Silver alloy. 2. Base: Printed wiring laminate. 3. Termination finish: For RoHS Case Styles: 3-5 µ inch ( microns) Gold over 1-2 µ inch ( microns) Nickel plate. All models, (+) suffix. 98-CK Rev.: W (/17/17) M File: 98-CK Sheet 1 of 13 This document and its contents are the property of Mini-Circuits

7 Tape & Reel Packaging TR-F37 Tape Width, mm Device Cavity Pitch, mm Reel Size, inches 7 Devices per Reel Small quantity standards (see note) 13 Standard 5 5 Note: Please consult individual model data sheet to determine device per reel availability. Mini-Circuits carrier tape materials provide protection from ESD (Electro-Static Discharge) during handling and transportation. Tapes are static dissipative and comply with industry standards EIA-481/EIA-541. Go to: 98-TR-F37 Rev.: C (1/17/18) M16476 File: 98-TR-F37.docx Sheet 1 of 1 This document and its contents are the property of Mini-Circuits.

10 Mini-Circuits Environmental Specifications ENV3 All Mini-Circuits products are manufactured under exacting quality assurance and control standards, and are capable of meeting published specifications after being subjected to any or all of the following physical and environmental test. Specification Test/Inspection Condition Reference/Spec Operating Temperature -55 to 85 C Ambient Environment Individual Model Data Sheet Storage Temperature -55 to C Ambient Environment Individual Model Data Sheet HAST 1 C, 85% RH, 96 hours JESD22-A1 Humidity 9 to 95% RH, 2 hours, 5 C MIL-STD-2, Method 3, Condition A, Except 5 C and end-point electrical test done within 12 hours Thermal Shock -55 to C, cycles MIL-STD-2, Method 7, Condition A-3, except + C Solder Reflow Heat Sn-Pb Eutectic Process: 225 C peak Pb-Free Process, 245 C peak J-STD-, Table 4-1, 4-2 and 5-2, Figure 5-1 Solderability X Magnification J-STD-2, Para 4.2.5, Test S, 95% Coverage Vibration (High Frequency) g peak, - Hz, 4 times in each of three axes (total 12) MIL-STD-883, Method 7.3, Condition A Mechanical Shock 5g, 11 ms, 1/2-sine, 18 shocks: 3 each direction, each of 3 axes MIL-STD-2, Method 213, Condition A Marking Resistance to Solvents Isopropyl alcohol + mineral spirits at 25 C; terpene defluxer at 25 C; distilled water + proylene glycol monomethyl ether + monoethanolamine at 63 C to 7 C MIL-STD-2, Method 215 ENV3 Rev: A 2/25/11 M12 File: ENV3.pdf This document and its contents are the property of Mini-Circuits. Page: 1

Features rugged welded case, hermetic other standard and custom PLP models available with wide selection of fco

Features rugged welded case, hermetic other standard and custom PLP models available with wide selection of fco Plug-In Low Pass Filter 5Ω Maximum Ratings DC to 15 MHz Operating Temperature -55 C to 1 C Storage Temperature -55 C to 1 C RF Power Input.5W max. Permanent damage may occur if any of these limits are