Taiyo Holdings / 4626

Transcription

1 COVERAGE INITIATED ON: Shared Research Inc. has produced this report by request from the company discussed in the report. The aim is to provide an owner s manual to investors. We at Shared Research Inc. make every effort to provide an accurate, objective, and neutral analysis. In order to highlight any biases, we clearly attribute our data and findings. We will always present opinions from company management as such. Our views are ours where stated. We do not try to convince or influence, only inform. We appreciate your suggestions and feedback. Write to us at sr_inquiries@sharedresearch.jp or find us on Bloomberg. Research Report by Shared Research Inc.

2 Research Report by Shared Research Inc. INDEX How to read a Shared Research report: This report begins with the trends and outlook section, which discusses the company s most recent earnings. First-time readers should start at the business section later in the report. Executive summary Key financial data Recent updates Highlights Trends and outlook Quarterly trends and results Medium-term outlook Business Business description Market and value chain Strengths and weaknesses Historical performance and financial statement Historical performance Income statement Balance sheet News and topics Other information History Major shareholders Dividend policy Top management Employees Corporate philosophy and CSR initiatives Glossary Profile /71

3 Research Report by Shared Research Inc. Executive summary Business overview Taiyo Holdings' forerunner, Taiyo Ink Mfg., was established in 1953 as a printing ink manufacturer and marketer. In 1970 Taiyo made its first etching resist shipments and entered the resist ink field (resist ink: insulating film that covers printed wiring boards [PWBs] to protect circuit patterns). Taiyo was early to become an official supplier for many large manufacturing clients, leveraging its execution speed (thanks to its independence), R&D and marketing prowess, strategic foresight into technological requirement for end products, and rapid expansion in overseas operation. Taiyo has a global market share in solder resist of over 50% (fairly high share in high-function rigid products and about half in general rigid products). In particular, the company has an extremely high share of the semiconductor package materials market. The OPM has averaged around 20% since FY03/15. Taiyo has four focus areas: rigid board materials, semiconductor package substrate materials, build-up board materials, and flexible printed circuit (FPC) board materials. Under the new medium-term plan through FY03/20, the company aims to break free from its dependency on solder resist and transform into a comprehensive chemical company. As additional growth drivers, Taiyo is looking to new businesses in pharmaceuticals, energy, and food production. The company became an equity-method affiliate of DIC Corporation (TSE1: 4631), which paid about JPY24.8bn and now holds 19.5% of Taiyo s stock. This capital and business alliance will enable the acquisition of more technologies and reinforce Taiyo s financial position. As part of its M&A strategy, Taiyo is conducting more acquisitions to establish a pharmaceutical business. It is looking to improve its R&D capabilities (constantly invests over 5% of sales in R&D) while maintaining an overall OPM of at least 20%. Earnings FY03/18 results: In the electronic parts industry, the company s core market, demand for automotive components, smartphones, virtual currency servers, and automotive electronics-related materials was solid. Aided by both rising sales volumes and a weaker yen, sales rose 9.1% YoY to JPY52.2bn and operating profit rose 22.9% to JPY11.3bn; the OPM rose to 21.7% versus 19.3% the previous year. The company made a one-time write-off of goodwill of JPY3.3bn, booking it as an extraordinary loss. Q4 sales of JPY13.2bn were up 10.7% YoY and Q4 operating profit of JPY2.6bn was up 29.8%; the OPM rose to 20.0% versus 17.0% during the same period the previous year. Full-year company forecast for FY03/19: For FY03/19, the company forecasts sales of JPY60.2bn (+15.2% YoY) and operating profit of JPY9.8bn (-13.6% YoY), assuming an average exchange rate of JPY102/USD. Using the same exchange rate assumption (JPY111/USD) the company used for FY03/18, the company forecasts FY03/19 sales of JPY63.8bn (+22.1% YoY) and operating profit of JPY11.4bn (+0.6% YoY). The company s overseas sales are denominated half in US dollars and half in local currencies. Taiyo estimates the full-year impact of a JPY1/USD change in forex rates at over JPY380mn for sales and JPY180mn for operating profit. The forex impact has increased recently due to a rising share of overseas sales of high-function rigid materials and semiconductor package substrate materials made in Japan. The company is conducting M&A in the pharmaceutical field and acquired Micro Network Technologies Corp. (MNT) using low-interest loans and the funds earned from the capital and business alliance with DIC Corp (TSE1: 4631), maintaining its cash position (JPY446mn in cash equivalents at end-march 2018) as it plans for the next deal. Capital expenditures ended at a little over JPY1.5bn (JPY5.0bn in FY03/18 forecasts), and the company plans to spend JPY4.0bn in FY03/19 (around JPY2.0bn in depreciation expenses). 03/71

4 Research Report by Shared Research Inc. Strengths and weaknesses Strengths: Rapid growth and high margins as the leading upstream specialist in the niche solder resist market; top management s decision speed and modern approach to financial management; and synergies from the capital and business alliance with DIC. Weaknesses: Dependence on solder resist, a mature product that lies in the shadow of the end-products it is used in; lack of personnel to stay ahead of technological innovation; and limited demonstrated ability to develop new businesses outside its core strength. 04/71

5 Research Report by Shared Research Inc. Key financial data Income statement FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 FY03/19 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Est. Sales 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 60,200 YoY 8.1% -28.1% 7.5% 15.1% -1.4% -9.1% 22.2% 9.1% 3.3% -4.0% 9.1% 15.2% Cost of sales 29,512 22,635 24,123 28,428 29,822 25,319 28,348 28,865 27,355 26,220 27,304 YoY 8.8% -23.3% 6.6% 17.8% 4.9% -15.1% 12.0% 1.8% -5.2% -4.1% 4.1% Cost ratio 65.1% 69.4% 68.8% 70.4% 74.9% 70.0% 64.1% 59.8% 54.9% 54.8% 52.3% Gross profit 15,826 9,979 10,932 11,938 9,974 10,864 15,875 19,394 22,487 21,645 24,937 YoY 6.7% -36.9% 9.6% 9.2% -16.5% 8.9% 46.1% 22.2% 15.9% -3.7% 15.2% GPM 34.9% 30.6% 31.2% 29.6% 25.1% 30.0% 35.9% 40.2% 45.1% 45.2% 47.7% SG&A expenses 6,930 6,647 6,089 6,557 5,933 6,479 8,307 10,139 11,522 12,424 13,599 YoY 0.9% -4.1% -8.4% 7.7% -9.5% 9.2% 28.2% 22.1% 13.6% 7.8% 9.5% SG&A ratio 15.3% 20.4% 17.4% 16.2% 14.9% 17.9% 18.8% 21.0% 23.1% 26.0% 26.0% Operating profit 8,896 3,332 4,843 5,380 4,040 4,385 7,568 9,254 10,964 9,221 11,337 9,800 YoY 11.7% -62.5% 45.3% 11.1% -24.9% 8.5% 72.6% 22.3% 18.5% -15.9% 22.9% -13.6% OPM 19.6% 10.2% 13.8% 13.3% 10.2% 12.1% 17.1% 19.2% 22.0% 19.3% 21.7% 16.3% Recurring profit 8,586 3,546 4,787 5,316 4,027 4,743 7,827 9,529 11,129 9,202 11,199 9,600 YoY 3.9% -58.7% 35.0% 11.1% -24.2% 17.8% 65.0% 21.7% 16.8% -17.3% 21.7% -14.3% RPM 18.9% 10.9% 13.7% 13.2% 10.1% 13.1% 17.7% 19.7% 22.3% 19.2% 21.4% 15.9% Net income attrib. to owners of parent 6,171 1,958 3,010 3,402 2,502 3,367 4,930 6,667 7,796 6,398 4,856 6,700 YoY 11.1% -68.3% 53.7% 13.0% -26.5% 34.6% 46.4% 35.2% 16.9% -17.9% -24.1% 38.0% Net margin 13.6% 6.0% 8.6% 8.4% 6.3% 9.3% 11.1% 13.8% 15.6% 13.4% 9.3% 11.1% USD/JPY Per share data (JPY) Shares issued (year end; '000) 27, , , , , , , , , , ,865.2 Treasury shares (year end: '000) 1, , , , , , , , , Shares outstanding (average; '000) 25, , , , , , , , , , ,812.1 EPS Dividend per share Payout ratio 49.3% 121.2% 77.5% 87.3% 91.5% 68.0% 61.9% 34.1% 32.5% 45.1% 95.0% 56.0% DOE 8.1% 6.5% 6.8% 8.6% 6.9% 6.6% 7.9% 5.5% 6.2% 5.5% 6.4% Book value per share 1, , , , , , , , , , ,520.7 Balance sheet (JPYmn) Total current assets 31,057 23,880 27,516 27,675 26,380 26,979 37,798 37,942 39,340 67,401 68,373 Cash and cash equivalents 13,106 11,291 11,913 13,152 11,563 13,766 20,338 18,183 18,385 48,800 44,588 T angible fixed assets 15,889 14,644 13,954 13,050 12,546 12,664 14,375 16,865 19,644 18,389 17,923 Intangible fixed assets ,144 5,327 4,919 4,537 21,818 Investments and other assets 1,520 1,876 1,843 1,821 1,417 4,032 1,050 1,106 1,561 2,057 3,374 Total assets 48,938 40,869 43,704 42,851 40,703 44,023 58,369 61,241 65,464 92, ,490 T otal current liabilities 7,959 5,303 7,172 7,681 6,393 6,724 8,936 11,056 10,898 11,355 20,491 Short-term liabilities ,069 1,372 1,774 8,261 T otal fixed liabilities 1, ,776 8,872 9,315 9,184 17,975 Long-term liabilities ,658 7,685 7,413 7,169 15,923 T otal liabilities 9,798 6,285 8,018 8,664 7,227 7,213 15,713 19,929 20,214 20,540 38,467 Total net assets 39,140 34,584 35,685 34,186 33,476 36,809 42,655 41,312 45,250 71,846 73,023 Cash flow statement (JPYmn) Cash flows from operating activities 9,241 4,581 3,126 4,575 2,793 6,109 7,020 9,232 10,546 9,042 8,100 Cash flows from investing activities -3,390-1, ,343-2,477-3,839-2,913-6,750-1,063-24,161 Cash flows from financing activities -1,969-4,428-2,366-3,696-2,978-2,314 2,350-9,919-2,740 20,342 11,319 Financial ratios Total interest-bearing debt ,192 8,754 8,785 8,943 24,184 Debt/equity ratio 0.0% 0.0% 0.0% 0.0% 0.0% 0.0% 14.5% 21.2% 19.4% 12.4% 33.1% ROA (RP-based) 17.8% 7.9% 11.3% 12.3% 9.6% 11.2% 15.3% 15.9% 17.6% 11.7% 11.0% ROE 16.5% 5.4% 8.7% 9.9% 7.5% 9.7% 12.8% 16.7% 19.0% 11.2% 6.8% Equity ratio 78.5% 83.3% 80.1% 78.2% 81.1% 82.2% 69.6% 63.8% 65.9% 76.9% 65.2% Per employee data (JPYmn) Number of employees ,148 1,122 1,202 1,249 Avg. temp. employees (not included in above) Sales per employee Operating profit per employee Capital expenditures and others Capital expenditures 1,414 1, ,555 3,321 4,055 1,722 1,565 4,000 Depreciation 1,529 1,396 1,261 1,127 1,046 1,003 1,181 1,411 1,891 2,485 1,941 2,000 Goodwill amortization ,535 1,661 R&D expenses , ,199 1,594 2,213 2,441 3,235 3,089 3,000 % of sales 1.9% 3.0% 2.9% 2.5% 2.4% 3.3% 3.6% 4.6% 4.9% 6.8% 5.9% 5.0% Note: Figures may differ from company materials due to differences in rounding methods. Note: Cash and cash equivalents are cash and deposit accounts listed on consolidated balance sheet excluding time deposits with a maturity over three months. Note: Sales and operating profit per employee calculated including average temporary employee numbers. From FY03/10 onward, average temporary employee numbers account for less than 10% of total so are omitted. Note: Does not include capex and amortization related to the marketing and manufacturing rights of 13 long-listed products. 05/71

6 Research Report by Shared Research Inc. Segment performance Segment information (new segments) Segment information FY03/17 FY03/18 (JPYmn) Cons. Cons. Sales (external customers) 47,866 52,241 Electronics Materials 46,450 49,854 Medical and Pharmaceuticals 819 Other Internal sales and transfers % of total sales Electronics Materials 97.0% 95.4% Medical and Pharmaceuticals 1.6% Other YoY -4.0% 9.1% Electronics Materials 7.3% Medical and Pharmaceuticals Other Operating profit 9,221 11,337 Electronics Materials 9,801 12,114 Medical and Pharmaceuticals 8 Other 7 97 Goodwill amortization Company-wide, other -626 % of total operating profit Electronics Materials 99.9% 99.1% Medical and Pharmaceuticals 0.1% Other YoY -15.9% 22.9% Electronics Materials 23.6% Medical and Pharmaceuticals Other OPM 19.3% 21.7% Electronics Materials 21.1% 24.3% Medical and Pharmaceuticals 1.0% Other Depreciation 2,485 2,284 Electronics Materials 1,794 1,331 Medical and Pharmaceuticals 353 Other Adjustments Increase in tangible and intangible fixed assets 1,722 22,513 Electronics Materials Medical and Pharmaceuticals 20,948 Other Adjustments 375 Note: Figures may differ from company materials due to differences in rounding methods. 06/71

7 Research Report by Shared Research Inc. Segment information (old segments) Segment information FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 PWB insulated materials 33,603 25,918 27,961 29,937 26,727 27,997 38,225 44,474 46,318 44,700 48,041 Rigid board materials 25,392 19,911 21,250 22,993 20,289 20,262 29,235 33,539 35,242 33,216 34,342 High-function 18,676 20,230 20,211 21,429 General 14,863 15,012 13,005 12,913 Substrates and flexible board materials 6,886 5,107 5,600 5,685 5,416 6,763 7,965 9,844 10,007 10,348 12,197 Package substrates 9,401 9,376 9,676 11,029 Flexible boards ,168 Build-up board materials 1, ,111 1,259 1, ,025 1,091 1,069 1,136 1,502 FPD materials 10,238 5,683 6,099 9,455 12,307 7,316 4,554 1, Other related products 1, ,443 1,808 3,231 3,165 4,199 Regional sales (incl. internal sales) Japan 26,866 18,970 20,379 18,491 11,787 13,065 14,005 15,786 17,002 17,917 19,807 China 30,804 21,596 10,361 11,911 10,636 10,834 17,791 20,421 21,820 20,618 21,539 Taiwan 4,083 4,414 3,706 3,936 8,398 9,614 9,854 10,042 9,116 South Korea 10,241 13,743 16,668 11,722 10,599 9,199 7,739 8,825 10,271 Others 1,419 1,205 2,972 3,061 2,618 2,854 3,524 4,140 4,451 4,076 4,979 Eliminaitons and company-wide -13,751-9,157-12,980-11,254-5,618-6,227-10,093-10,900-11,023-13,612-13,471 Sales to external customers Japan 13,150 9,843 9,031 9,418 8,605 8,822 8,697 9,410 10,565 9,446 10,171 China 30,786 21,585 10,348 11,911 10,543 10,682 16,203 18,837 20,687 19,923 21,063 Taiwan 3,007 3,219 2,828 2,897 5,575 7,141 6,864 6,062 6,410 South Korea 9,709 12,784 15,233 10,985 10,312 8,835 7,385 8,459 9,771 Others 1,401 1,186 2,958 3,031 2,585 2,796 3,436 4,034 4,340 3,974 4,824 YoY 8.1% -28.1% 7.5% 15.1% -1.4% -9.1% 22.2% 9.1% 3.3% -4.0% 9.1% PWB insulated materials 8.4% -22.9% 7.9% 7.1% -10.7% 4.8% 36.5% 16.3% 4.1% -3.5% 7.5% Rigid board materials 5.9% -21.6% 6.7% 8.2% -11.8% -0.1% 44.3% 14.7% 5.1% -5.7% 3.4% High-function 8.3% -0.1% 6.0% General 1.0% -13.4% -0.7% Substrates and flexible board materials 19.4% -25.8% 9.7% 1.5% -4.7% 24.9% 17.8% 23.6% 1.7% 3.4% 17.9% Package substrates -0.3% 3.2% 14.0% Flexible boards 42.4% 6.5% 73.8% Build-up board materials 6.3% -32.1% 23.4% 13.3% -18.8% -4.9% 5.5% 6.4% -2.0% 6.3% 32.2% FPD materials 7.0% -44.5% 7.3% 55.0% 30.2% -40.6% -37.8% -56.6% -85.2% Other related products 22.9% -30.9% 4.4% -2.2% -21.8% 14.3% 66.1% 25.3% 78.7% -10.2% 32.7% Regional sales (incl. internal sales) Japan 2.6% -29.4% 7.4% -9.3% -36.3% 10.8% 7.2% 12.7% 7.7% 5.4% 10.5% China 17.2% -29.9% -52.0% 15.0% -10.7% 1.9% 64.2% 14.8% 6.9% -5.5% 4.5% Taiwan 8.1% -16.0% 6.2% 113.4% 14.5% 2.5% 1.9% -9.2% South Korea 34.2% 21.3% -29.7% -9.6% -13.2% -15.9% 14.0% 16.4% Others -18.4% -15.1% 146.6% 3.0% -14.5% 9.0% 23.5% 17.5% 7.5% -8.4% 22.2% Eliminaitons and company-wide Sales to external customers -6.0% -25.1% -8.2% 4.3% -8.6% 2.5% -1.4% 8.2% 12.3% -10.6% 7.7% Japan 17.3% -29.9% -52.1% 15.1% -11.5% 1.3% 51.7% 16.3% 9.8% -3.7% 5.7% China 7.1% -12.1% 2.4% 92.4% 28.1% -3.9% -11.7% 5.7% Taiwan 31.7% 19.2% -27.9% -6.1% -14.3% -16.4% 14.5% 15.5% South Korea -18.5% -15.3% 149.4% 2.5% -14.7% 8.2% 22.9% 17.4% 7.6% -8.4% 21.4% Operating profit 8,896 3,332 4,843 5,380 4,040 4,385 7,568 9,254 10,964 9,221 11,337 Japan 2, , ,685 1,906 2,466 2,254 2,026 3,408 China 6,301 3,059 2,463 2,813 1,751 1,584 2,617 3,507 4,775 4,582 4,602 Taiwan ,427 1,763 2,227 1,492 1,847 South Korea ,073 1,212 1,414 1,275 1,663 Others Eliminaitons and company-wide YoY 11.7% -62.5% 45.3% 11.1% -24.9% 8.5% 72.6% 22.3% 18.5% -15.9% 22.9% Japan 8.3% -99.3% % 68.8% -2.4% 70.4% 13.1% 29.4% -8.6% -10.1% 68.2% China 13.4% -51.5% -19.5% 14.2% -37.8% -9.5% 65.2% 34.0% 36.2% -4.0% 0.4% Taiwan -20.8% -7.8% 5.7% 187.1% 23.5% 26.3% -33.0% 23.8% South Korea -0.9% -33.7% -8.9% 81.6% 13.0% 16.7% -9.8% 30.4% Others 3.5% -28.8% -32.1% 84.5% 14.3% 18.8% 40.2% 22.5% 7.6% -10.6% -3.7% OPM 19.6% 10.2% 13.8% 13.3% 10.2% 12.1% 17.1% 19.2% 22.0% 19.3% 21.7% Japan 8.5% 0.1% 2.9% 5.5% 8.4% 12.9% 13.6% 15.6% 13.3% 11.3% 17.2% China 20.5% 14.2% 23.8% 23.6% 16.5% 14.6% 14.7% 17.2% 21.9% 22.2% 21.4% Taiwan 15.8% 11.6% 12.7% 12.6% 17.0% 18.3% 22.6% 14.9% 20.3% South Korea 9.6% 7.1% 3.9% 5.0% 10.1% 13.2% 18.3% 14.4% 16.2% Others 18.8% 15.8% 4.3% 7.8% 10.4% 11.3% 12.9% 13.4% 13.4% 13.1% 10.3% Note: Figures may differ from company materials due to differences in rounding methods. Note: FY03/08 and FY03/09 sales figures for China are those for Asia including Taiwan and South Korea (figures for China alone from FY03/10). Note: From FY03/17, FPD is included in Other related products. Note: Operating profit by product not disclosed. 07/71

8 Research Report by Shared Research Inc. Sales for key products Sales by region (JPYmn) 60,000 Rigid board materials Build-up board materials Other related products Substrates and flexible board materials FPD materials (JPYmn) 60,000 Japan China Taiwan South Korea Others 50,000 50,000 40,000 40,000 30,000 30,000 20,000 20,000 10,000 10, Note: FY03/08 and FY03/09 sales figures for China are those for Asia including Taiwan and South Korea (figures for China alone from FY03/10). 08/71

9 Research Report by Shared Research Inc. Recent updates Highlights On July 5, 2018, Taiyo Holdings Co., Ltd. announced that its Board of Directors, at a meeting held the same day, had approved a new share issue in connection with a restricted stock award system and performance-based stock bonus system, as detailed below. Payment date July 20, 2018 Number of shares to be issued 45,242 shares of common stock of the company Issue price JPY4,410 per share Total value of shares to be issued JPY199,517,220 Funds to be procured JPY77,616,000 Method of offer or allotment Allotment of special restricted stock for 27,642 shares to be issued Third-party allotment for 17,600 shares to be issued Allottees (Allotment of special restricted stock) Five executive directors of the company 27,642 shares Method of contribution Others (Third-party allotment) Five executive directors of the company 17,600 shares In-kind contribution of monetary compensation receivables for allotment of special restricted stock; payment of money for third-party allotment. The issuance of new shares is subject to the effectiveness of the securities registration statement submitted in accordance with the Financial Instruments and Exchange Act. New share issue purpose and rational The new share issue was authorized in accordance with a resolution passed at a Board of Directors meeting on May 19, 2017, and subsequently approved at the 71st ordinary general shareholders meeting held on June 21, 2017, as part of a compensation scheme aimed at further increasing the motivation of executive directors to work toward a sustained increase in the enterprise value of the Taiyo group and further align their interests with those of shareholders. The restricted stock award system and performance-based stock bonus system cover the company's executive directors (directors, as mentioned in each provision of Article 363, Paragraph 1 of the Companies Act). On the same day, the company also announced that it was acquiring all outstanding shares of Thou-Management Corporation (TMC), making it a wholly owned consolidated subsidiary. TMC has a long track record in the systems integration business (contract design and development of business process systems, including servers, database, and terminal-related applications for PCs, smartphones, and tablet computers) as well as in ASP data and security solutions services, and going forward will work to expand its AI business utilizing IoT platforms, IoT security, and data (research) science. Taiyo believes the acquisition of TMC will help it speed up new system construction, something that it had previously identified as a high priority. Taiyo is also looking for the acquisition of TMC to help it sustain growth and increase the group's enterprise value, as the combination of TMC and subsidiary Micro Network Technologies Corp. (MNT) will give the group the internal resources needed to move quickly at every stage of the system construction process, from system planning and proposal to development and operation. Taiyo also expects the development of a close working relationship between TMC and MNT to be mutually beneficial and contribute greatly to the expansion of new business opportunities in the future. In addition to the acquisition of TMC, Taiyo also announced that the Board of Directors, at a meeting held the same day, had approved the following personnel change effective the same day. 09/71

10 Research Report by Shared Research Inc. New position Name Current position Managing Executive Officer Chairman of the Board and Representative Director, Micro Network Technologies Corp. Representative Director and Chairman, Thou-Management Corp. Harutomo Kaiho Managing Executive Officer Chairman of the Board and Representative Director, Micro Network Technologies Corp. On June 20, 2018, the company announced a partial revision to its FY03/18 consolidated financial results and released new segment information. The company group had been reporting financial results under regional segments the four reportable segments of Japan, China, Taiwan, and South Korea that reflected the group s manufacture and sales structure. However, starting FY03/18, Taiyo realigned its reportable segments to the two business-based segments of Electronics Materials and Medical and Pharmaceuticals. In January 2018, Taiyo Pharma Co., Ltd. (a subsidiary established in August 2017) obtained manufacturing and sales authorization, manufacturing and sales rights, and all related assets for 13 long-listed products. In light of this development, which increased the quantitative significance of the group s medical and pharmaceutical business, the company determined it was more appropriate to categorize its activities based on businesses rather than locations, and decided to change its reportable segments accordingly. Figures from the previous fiscal year have been adjusted to match the new segmentation for YoY comparison purposes. FY03/18 results under the new segmentation are as follows: Electronics Materials Sales in the Electronics Materials segment increased 7.3% YoY to JPY49.9bn backed by strong demand for materials used in smartphones, servers for virtual currency, and automotive components, as well as the effect of yen depreciation. Segment profit was up 23.6% YoY to JPY12.1bn. Medical and Pharmaceuticals The company launched its Medical and Pharmaceuticals business on a full scale starting January 2018, when it obtained manufacturing and sales authorization, manufacturing and sales rights, and all related assets for 13 long-listed products. As a result, sales in FY03/18 reached JPY819mn, and segment profit JPY8mn. There is no YoY comparison for the segment as the business was newly launched during FY03/18. 10/71

11 Research Report by Shared Research Inc. Segment information (new segments) Segment information FY03/17 FY03/18 (JPYmn) Cons. Cons. Sales (external customers) 47,866 52,241 Electronics Materials 46,450 49,854 Medical and Pharmaceuticals 819 Other Internal sales and transfers % of total sales Electronics Materials 97.0% 95.4% Medical and Pharmaceuticals 1.6% Other YoY -4.0% 9.1% Electronics Materials 7.3% Medical and Pharmaceuticals Other Operating profit 9,221 11,337 Electronics Materials 9,801 12,114 Medical and Pharmaceuticals 8 Other 7 97 Goodwill amortization Company-wide, other -626 % of total operating profit Electronics Materials 99.9% 99.1% Medical and Pharmaceuticals 0.1% Other YoY -15.9% 22.9% Electronics Materials 23.6% Medical and Pharmaceuticals Other OPM 19.3% 21.7% Electronics Materials 21.1% 24.3% Medical and Pharmaceuticals 1.0% Other Depreciation 2,485 2,284 Electronics Materials 1,794 1,331 Medical and Pharmaceuticals 353 Other Adjustments Increase in tangible and intangible fixed assets 1,722 22,513 Electronics Materials Medical and Pharmaceuticals 20,948 Other Adjustments 375 Note: Figures may differ from company materials due to differences in rounding methods. On May 29, 2018, Shared Research updated the report following interviews with the company. On May 2, 2018, the company announced full-year results for FY03/18; see the results section for details. For previous releases and developments, please refer to the News and topics section. 11/71

12 Research Report by Shared Research Inc. Trends and outlook Quarterly trends and results Cumulative FY03/16 FY03/17 FY03/18 (JPYmn) Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Sales 12,447 25,400 38,300 49,843 11,306 23,442 35,922 47,866 12,425 25,784 39,022 52,241 PWB insulated materials 11,679 23,672 35,607 46,318 10,516 21,919 33,549 44,700 11,554 23,996 36,326 48,041 Rigid board materials 8,756 18,061 27,122 35,242 7,971 16,523 25,030 33,216 8,506 17,540 26,255 34,342 High-function 4,939 10,320 15,496 20,230 4,802 10,123 15,172 20,211 5,287 10,903 16,318 21,429 General 3,817 7,741 11,626 15,012 3,169 6,400 9,858 13,005 3,219 6,637 9,937 12,913 Substrates and flexible board materials 2,666 5,065 7,680 10,007 2,270 4,861 7,688 10,348 2,704 5,706 8,941 12,197 Package substrates 2,522 4,746 7,187 9,376 2,109 4,531 7,163 9,676 2,490 5,144 8,021 11,029 Flexible boards ,168 Build-up board materials , , ,130 1,502 FPD materials Other related products 690 1,535 2,424 3, ,523 2,371 3, ,785 2,695 4,199 Regional sales (incl. internal sales) Japan 4,282 8,651 12,976 17,002 4,052 8,594 13,239 17,917 4,686 9,568 14,887 19,807 China 5,296 11,320 16,919 21,820 4,970 10,439 15,361 20,618 5,221 11,078 16,610 21,539 Taiwan 2,559 5,014 7,581 9,854 2,007 4,128 7,677 10,042 2,235 4,579 7,059 9,116 South Korea 1,992 3,889 5,922 7,739 1,837 4,073 6,453 8,825 2,369 5,035 7,629 10,271 Others 1,097 2,263 3,360 4, ,990 3,033 4,076 1,084 2,098 3,141 4,979 Eliminaitons and company-wide -2,779-5,737-8,458-11,023-2,552-5,782-9,841-13,612-3,170-6,574-10,304-13,471 Sales to external customers Japan 2,668 5,249 7,959 10,565 2,413 4,694 7,134 9,446 2,450 4,889 7,542 10,171 China 4,990 10,697 16,049 20,687 4,768 10,033 14,791 19,923 5,073 10,822 16,234 21,063 Taiwan 1,808 3,528 5,356 6,864 1,408 2,880 4,851 6,062 1,595 3,228 4,962 6,410 South Korea 1,908 3,718 5,659 7,385 1,746 3,896 6,189 8,459 2,254 4,799 7,255 9,771 Others 1,072 2,207 3,274 4, ,938 2,953 3,974 1,051 2,044 3,027 4,824 YoY 6.8% 2.5% 3.8% 3.3% -9.2% -7.7% -6.2% -4.0% 9.9% 10.0% 8.6% 9.1% PWB insulated materials 13.8% 7.3% 6.0% 4.1% -10.0% -7.4% -5.8% -3.5% 9.9% 9.5% 8.3% 7.5% Rigid board materials 14.4% 9.7% 7.7% 5.1% -9.0% -8.5% -7.7% -5.7% 6.7% 6.2% 4.9% 3.4% High-function 14.0% 11.1% 8.3% -2.8% -1.9% -2.1% -0.1% 10.1% 7.7% 7.6% 6.0% General 4.5% 3.6% 1.0% -17.0% -17.3% -15.2% -13.4% 1.6% 3.7% 0.8% -0.7% Substrates and flexible board materials 14.3% 0.5% 1.1% 1.7% -14.9% -4.0% 0.1% 3.4% 19.1% 17.4% 16.3% 17.9% Package substrates -1.4% -1.0% -0.3% -16.4% -4.5% -0.3% 3.2% 18.1% 13.5% 12.0% 14.0% Flexible boards 39.9% 45.4% 42.4% 11.8% 3.4% 6.5% 6.5% 32.9% 70.3% 75.2% 73.8% Build-up board materials -6.9% -0.2% -1.7% -2.0% 7.0% -2.0% 3.2% 6.3% 25.1% 40.2% 36.0% 32.2% FPD materials -92.1% -89.6% -86.0% -85.2% Other related products 57.5% 72.9% 76.2% 78.7% 2.9% -11.8% -11.9% -10.2% 10.3% 17.2% 13.7% 32.7% Regional sales (incl. internal sales) Japan 10.5% 5.3% 5.5% 7.7% -5.4% -0.7% 2.0% 5.4% 15.6% 11.3% 12.4% 10.5% China 19.4% 13.6% 10.3% 6.9% -6.2% -7.8% -9.2% -5.5% 5.1% 6.1% 8.1% 4.5% Taiwan 13.2% 4.4% 3.7% 2.5% -21.6% -17.7% 1.3% 1.9% 11.4% 10.9% -8.1% -9.2% South Korea -21.9% -26.7% -19.2% -15.9% -7.8% 4.7% 9.0% 14.0% 29.0% 23.6% 18.2% 16.4% Others 6.9% 11.8% 9.8% 7.5% -9.6% -12.1% -9.7% -8.4% 9.3% 5.4% 3.6% 22.2% Cost of sales 7,016 13,981 21,093 27,355 6,311 13,160 19,739 26,220 6,544 13,551 20,563 27,304 YoY -1.6% -7.4% -5.0% -5.2% -10.0% -5.9% -6.4% -4.1% 3.7% 3.0% 4.2% 4.1% Cost ratio 56.4% 55.0% 55.1% 54.9% 55.8% 56.1% 54.9% 54.8% 52.7% 52.6% 52.7% 52.3% Gross profit 5,431 11,419 17,206 22,487 4,994 10,282 16,182 21,645 5,880 12,233 18,459 24,937 YoY 20.0% 18.1% 17.3% 15.9% -8.0% -10.0% -6.0% -3.7% 17.7% 19.0% 14.1% 15.2% GPM 43.6% 45.0% 44.9% 45.1% 44.2% 43.9% 45.0% 45.2% 47.3% 47.4% 47.3% 47.7% SG&A expenses 2,829 5,612 8,559 11,522 2,855 5,725 8,993 12,424 3,166 6,489 9,759 13,599 YoY 16.9% 14.2% 15.5% 13.6% 0.9% 2.0% 5.1% 7.8% 10.9% 13.3% 8.5% 9.5% SG&A ratio 22.7% 22.1% 22.3% 23.1% 25.3% 24.4% 25.0% 26.0% 25.5% 25.2% 25.0% 26.0% Operating profit 2,601 5,807 8,646 10,964 2,139 4,557 7,188 9,221 2,714 5,744 8,699 11,337 Japan 766 1,490 1,952 2, ,439 2, ,622 2,732 3,408 China 1,050 2,392 3,670 4,775 1,108 2,387 3,531 4,582 1,147 2,463 3,603 4,602 Taiwan 556 1,159 1,749 2, ,338 1, ,473 1,847 South Korea ,109 1, , ,295 1,663 Others Eliminaitons and company-wide YoY 23.7% 22.1% 19.1% 18.5% -17.8% -21.5% -16.9% -15.9% 26.9% 26.0% 21.0% 22.9% Japan 22.2% 9.6% -4.8% -8.6% -58.7% -42.1% -26.3% -10.1% 154.7% 88.2% 89.9% 68.2% China 45.4% 43.4% 39.1% 36.2% 5.5% -0.2% -3.8% -4.0% 3.5% 3.2% 2.0% 0.4% Taiwan 38.0% 32.0% 29.3% 26.3% -28.8% -28.1% -23.5% -33.0% 23.0% 15.2% 10.1% 23.8% South Korea 17.3% 18.0% 16.6% 16.7% -6.2% -16.8% -13.1% -9.8% 15.7% 39.8% 34.3% 30.4% Others 1.5% 2.4% 4.3% 7.6% 4.4% 0.7% -11.3% -10.6% -10.6% -27.8% -42.2% -3.7% OPM 20.9% 22.9% 22.6% 22.0% 18.9% 19.4% 20.0% 19.3% 21.8% 22.3% 22.3% 21.7% Japan 17.9% 17.2% 15.0% 13.3% 7.8% 10.0% 10.9% 11.3% 17.2% 17.0% 18.4% 17.2% China 19.8% 21.1% 21.7% 21.9% 22.3% 22.9% 23.0% 22.2% 22.0% 22.2% 21.7% 21.4% Taiwan 21.7% 23.1% 23.1% 22.6% 19.7% 20.2% 17.4% 14.9% 21.8% 21.0% 20.9% 20.3% South Korea 17.0% 18.7% 18.7% 18.3% 17.3% 14.9% 14.9% 14.4% 15.5% 16.8% 17.0% 16.2% Others 12.3% 12.9% 13.1% 13.4% 14.2% 14.8% 12.9% 13.1% 11.6% 10.2% 7.2% 10.3% Non-operating income Non-operating expenses Recurring profit 2,616 5,889 8,831 11,129 2,153 4,602 7,302 9,202 2,683 5,690 8,659 11,199 YoY 21.2% 20.7% 18.3% 16.8% -17.7% -21.9% -17.3% -17.3% 24.6% 23.6% 18.6% 21.7% RPM 21.0% 23.2% 23.1% 22.3% 19.0% 19.6% 20.3% 19.2% 21.6% 22.1% 22.2% 21.4% Extraordinary gains Extraordinary losses , ,298 Pre-tax profit 2,621 5,894 8,839 11,137 2,153 4,602 6,433 8,756 2,664 5,671 8,657 7,941 Income taxes 785 1,656 2,368 3, ,656 2, ,621 2,433 3,016 Income taxes current 1,234 1,824 2,338 2, ,466 2,053 2,588 1,025 1,583 2,318 3,040 Income taxes deferred Implied tax rate 30.0% 28.1% 26.8% 27.0% 11.1% 19.5% 25.7% 25.1% 30.0% 28.6% 28.1% 38.0% Net income 1,835 4,238 6,470 8,128 1,913 3,705 4,777 6,557 1,865 4,043 6,223 4,925 Net income attributable to non-controlling interests Net income attributable to owners of parent 1,764 4,088 6,226 7,796 1,876 3,623 4,635 6,398 1,844 3,998 6,160 4,856 YoY 20.6% 22.5% 17.9% 16.9% 6.3% -11.4% -25.6% -17.9% -1.7% 10.4% 32.9% -24.1% Net margin 14.2% 16.1% 16.3% 15.6% 16.6% 15.5% 12.9% 13.4% 14.8% 15.5% 15.8% 9.3% USD/JPY Note: Figures may differ from company materials due to differences in rounding methods. 12/71

13 Research Report by Shared Research Inc. Quarterly FY03/16 FY03/17 FY03/18 (JPYmn) Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Sales 12,447 12,953 12,900 11,543 11,306 12,136 12,480 11,944 12,425 13,359 13,238 13,219 PWB insulated materials 11,679 11,993 11,935 10,711 10,516 11,403 11,630 11,151 11,554 12,442 12,330 11,715 Rigid board materials 8,756 9,305 9,061 8,120 7,971 8,552 8,507 8,186 8,506 9,034 8,715 8,087 High-function 4,939 5,381 5,176 4,734 4,802 5,321 5,049 5,039 5,287 5,616 5,415 5,111 General 3,817 3,924 3,885 3,386 3,169 3,231 3,458 3,147 3,219 3,418 3,300 2,976 Substrates and flexible board materials 2,666 2,399 2,615 2,327 2,270 2,591 2,827 2,660 2,704 3,002 3,235 3,256 Package substrates 2,522 2,224 2,441 2,189 2,109 2,422 2,632 2,513 2,490 2,654 2,877 3,008 Flexible boards Build-up board materials FPD materials Other related products ,504 Regional sales (incl. internal sales) Japan 4,282 4,369 4,325 4,026 4,052 4,542 4,645 4,678 4,686 4,882 5,319 4,920 China 5,296 6,024 5,599 4,901 4,970 5,469 4,922 5,257 5,221 5,857 5,532 4,929 Taiwan 2,559 2,455 2,567 2,273 2,007 2,121 3,549 2,365 2,235 2,344 2,480 2,057 South Korea 1,992 1,897 2,033 1,817 1,837 2,236 2,380 2,372 2,369 2,666 2,594 2,642 Others 1,097 1,166 1,097 1, ,043 1,043 1,084 1,014 1,043 1,838 Eliminaitons and company-wide -2,779-2,958-2,721-2,565-2,552-3,230-4,059-3,771-3,170-3,404-3,730-3,167 Sales to external customers Japan 2,668 2,581 2,710 2,606 2,413 2,281 2,440 2,312 2,450 2,439 2,653 2,629 China 4,990 5,707 5,352 4,638 4,768 5,265 4,758 5,132 5,073 5,749 5,412 4,829 Taiwan 1,808 1,720 1,828 1,508 1,408 1,472 1,971 1,211 1,595 1,633 1,734 1,448 South Korea 1,908 1,810 1,941 1,726 1,746 2,150 2,293 2,270 2,254 2,545 2,456 2,516 Others 1,072 1,135 1,067 1, ,015 1,021 1, ,797 YoY 6.8% -1.3% 6.6% 1.4% -9.2% -6.3% -3.3% 3.5% 9.9% 10.1% 6.1% 10.7% PWB insulated materials 13.8% 1.7% 3.4% -1.6% -10.0% -4.9% -2.6% 4.1% 9.9% 9.1% 6.0% 5.1% Rigid board materials 14.4% 5.6% 4.0% -2.9% -9.0% -8.1% -6.1% 0.8% 6.7% 5.6% 2.4% -1.2% High-function 5.8% 0.2% -2.8% -1.1% -2.5% 6.4% 10.1% 5.5% 7.2% 1.4% General 1.8% -6.9% -17.0% -17.7% -11.0% -7.1% 1.6% 5.8% -4.6% -5.4% Substrates and flexible board materials 14.3% -11.5% 2.3% 3.7% -14.9% 8.0% 8.1% 14.3% 19.1% 15.9% 14.4% 22.4% Package substrates -0.2% 2.2% -16.4% 8.9% 7.8% 14.8% 18.1% 9.6% 9.3% 19.7% Flexible boards 56.8% 32.7% 11.8% -3.4% 12.1% 6.5% 32.9% 105.9% 83.6% 68.7% Build-up board materials -6.9% 6.6% -4.8% -2.9% 7.0% -10.0% 14.3% 15.5% 25.1% 56.2% 28.4% 22.0% FPD materials -92.1% -86.9% -1.3% -61.5% Other related products 57.5% 87.8% 82.2% 86.8% 2.9% -23.4% -12.1% -4.6% 10.3% 24.6% 7.3% 89.4% Regional sales (incl. internal sales) Japan 10.5% 0.7% 5.8% 15.5% -5.4% 4.0% 7.4% 16.2% 15.6% 7.5% 14.5% 5.2% China 19.4% 8.9% 4.2% -3.6% -6.2% -9.2% -12.1% 7.3% 5.1% 7.1% 12.4% -6.2% Taiwan 13.2% -3.4% 2.4% -1.4% -21.6% -13.6% 38.3% 4.0% 11.4% 10.5% -30.1% -13.0% South Korea -21.9% -31.0% 0.2% -2.8% -7.8% 17.9% 17.1% 30.5% 29.0% 19.2% 9.0% 11.4% Others 6.9% 16.7% 5.9% 1.1% -9.6% -14.4% -4.9% -4.4% 9.3% 1.6% 0.0% 76.2% Cost of sales 7,016 6,965 7,112 6,262 6,311 6,849 6,579 6,481 6,544 7,007 7,012 6,741 YoY -1.6% -12.7% 0.1% -5.9% -10.0% -1.7% -7.5% 3.5% 3.7% 2.3% 6.6% 4.0% Cost ratio 56.4% 53.8% 55.1% 54.2% 55.8% 56.4% 52.7% 54.3% 52.7% 52.5% 53.0% 51.0% Gross profit 5,431 5,988 5,787 5,281 4,994 5,288 5,900 5,463 5,880 6,353 6,226 6,478 YoY 20.0% 16.3% 15.8% 11.8% -8.0% -11.7% 2.0% 3.4% 17.7% 20.1% 5.5% 18.6% GPM 43.6% 46.2% 44.9% 45.8% 44.2% 43.6% 47.3% 45.7% 47.3% 47.6% 47.0% 49.0% SG&A expenses 2,829 2,783 2,947 2,963 2,855 2,870 3,268 3,431 3,166 3,323 3,270 3,840 YoY 16.9% 11.5% 18.1% 8.7% 0.9% 3.1% 10.9% 15.8% 10.9% 15.8% 0.1% 11.9% SG&A ratio 22.7% 21.5% 22.8% 25.7% 25.3% 23.6% 26.2% 28.7% 25.5% 24.9% 24.7% 29.0% Operating profit 2,601 3,206 2,839 2,318 2,139 2,418 2,631 2,033 2,714 3,030 2,955 2,638 Japan , China 1,050 1,342 1,278 1,105 1,108 1,279 1,144 1,051 1,147 1,316 1, Taiwan South Korea Others Eliminaitons and company-wide YoY 23.7% 20.9% 13.5% 16.1% -17.8% -24.6% -7.3% -12.3% 26.9% 25.3% 12.3% 29.8% Japan 22.2% -1.1% -33.1% -27.4% -58.7% -24.6% 24.9% 94.4% 154.7% 49.6% 92.4% 15.2% China 45.4% 41.9% 31.8% 27.2% 5.5% -4.7% -10.5% -4.9% 3.5% 2.9% -0.3% -4.9% Taiwan 38.0% 26.9% 24.2% 16.6% -28.8% -27.5% -14.4% -67.8% 23.0% 8.2% 1.6% 142.9% South Korea 17.3% 18.7% 14.0% 16.9% -6.2% -26.0% -6.0% 2.0% 15.7% 66.6% 25.1% 18.3% Others 1.5% 3.3% 8.0% 18.2% 4.4% -2.5% -35.1% -8.3% -10.6% -43.5% -86.5% 101.4% OPM 20.9% 24.8% 22.0% 20.1% 18.9% 19.9% 21.1% 17.0% 21.8% 22.7% 22.3% 20.0% Japan 17.9% 16.6% 10.7% 7.5% 7.8% 12.0% 12.4% 12.5% 17.2% 16.7% 20.9% 13.7% China 19.8% 22.3% 22.8% 22.5% 22.3% 23.4% 23.2% 20.0% 22.0% 22.5% 20.6% 20.3% Taiwan 21.7% 24.6% 23.0% 21.0% 19.7% 20.6% 14.2% 6.5% 21.8% 20.2% 20.7% 18.2% South Korea 17.0% 20.5% 18.8% 16.8% 17.3% 12.8% 15.1% 13.1% 15.5% 17.9% 17.3% 13.9% Others 12.3% 13.6% 13.5% 14.3% 14.2% 15.4% 9.2% 13.7% 11.6% 8.6% 1.2% 15.7% Non-operating income Non-operating expenses Recurring profit 2,616 3,273 2,942 2,298 2,153 2,449 2,700 1,900 2,683 3,007 2,969 2,540 YoY 21.2% 20.4% 13.7% 11.3% -17.7% -25.2% -8.2% -17.3% 24.6% 22.8% 10.0% 33.7% RPM 21.0% 25.3% 22.8% 19.9% 19.0% 20.2% 21.6% 15.9% 21.6% 22.5% 22.4% 19.2% Extraordinary gains Extraordinary losses , ,279 Pre-tax profit 2,621 3,273 2,945 2,298 2,153 2,449 1,831 2,323 2,664 3,007 2, Income taxes Income taxes current 1, , Income taxes deferred Implied tax rate 30.0% 26.6% 24.2% 27.9% 11.1% 26.9% 41.5% 23.4% 30.0% 27.3% 27.2% -81.4% Net income 1,835 2,403 2,232 1,658 1,913 1,792 1,072 1,780 1,865 2,178 2,180-1,298 Net income attributable to non-controlling interests Net income attributable to owners of parent 1,764 2,324 2,138 1,570 1,876 1,747 1,012 1,763 1,844 2,154 2,162-1,304 YoY 20.6% 24.0% 10.0% 13.3% 6.3% -24.8% -52.7% 12.3% -1.7% 23.3% 113.6% % Net margin 14.2% 17.9% 16.6% 13.6% 16.6% 14.4% 8.1% 14.8% 14.8% 16.1% 16.3% -9.9% Note: Figures may differ from company materials due to differences in rounding methods. 13/71

14 Research Report by Shared Research Inc. Quarterly performance Operating profit and OPM (JPYmn) Sales Operating profit (right axis) (JPYmn) Operating profit (right axis) OPM (right axis) 14,000 3,500 3, % 13,500 13,000 12,500 12,000 11,500 11,000 3,000 2,500 2,000 1,500 1,000 3,000 2,500 2,000 1,500 1, % 22.0% 20.9% 19.9% 21.1% 20.1% 18.9% 17.0% 21.8% 22.7% 22.3% 20.0% 25.0% 20.0% 15.0% 10.0% 10, (JPYmn) % 10,000 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 0 0 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 0.0% FY03/16 FY03/17 FY03/18 FY03/16 FY03/17 FY03/18 Sales by product category (JPYmn) 16,000 14,000 Sales by region (JPYmn) 16,000 Japan China Taiwan South Korea Others 12,000 10,000 Other related products FPD materials 14,000 12,000 8,000 6,000 4,000 2,000 Build-up board materials Flexible boards Package substrates Rigid: general Rigid: high-function 10,000 8,000 6,000 4,000 2,000 0 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 FY03/16 FY03/17 FY03/18 0 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 FY03/16 FY03/17 FY03/18 FY03/18 results Markets In the electronic parts industry, the group s core market, demand for smartphones, virtual currency servers, and automotive electronics-related materials was solid. Topics of interest The realized average exchange rate for the full year was JPY111/USD, in line with company's projection of JPY111/USD (announced February 2, 2018) Sales volume of general rigid board materials declined, but sales volume of dry film and flexible printed circuit (FPC) board materials rose YoY Completed transfer of the manufacturing and sales authorization, manufacturing and sales rights, and all related assets for 13 long-listed products to subsidiary Taiyo Pharma Co., Ltd. in January 2018 Acquired systems engineering company Micro Network Technologies Corp., making it a consolidated subsidiary (announced April 6, 2018) Overview of company earnings In FY03/18, sales rose 9.1% YoY to JPY52.2bn and operating profit rose 22.9% to JPY11.3bn; the OPM rose to 21.7% versus 19.3% the previous year. The company made a one-time write-off of goodwill of JPY3.3bn, booking it as an extraordinary loss. Q4 sales of JPY13.2bn were up 10.7% YoY and operating profit of JPY2.6bn was up 29.8%; the Q4 OPM of 20.0% compares with 17.0% in Q4 FY03/17. 14/71

15 Research Report by Shared Research Inc. Causes of YoY changes Sales and operating profit grew YoY saw positive contributions from rising sales volume of dry film (+JPY1.1bn to sales, +JPY629mn to operating profit), foreign-exchange impact/changes in the product mix (+JPY2.9bn to sales, +JPY1.7bn to operating profit), and rising sales at the medical/pharmaceutical business (+JPY820mn to sales, +JPY9mn to operating profit, and +JPY353mn if the amortization of sales rights is included), which together easily offset the negative impact of a decline in sales volume of liquid solder resist for printed wiring boards (-JPY453mn to sales, -JPY223mn to operating profit). Sales by product category Sales of high-function rigid board materials were JPY21.4bn (+6.0% YoY), general rigid board materials were JPY12.9bn (-0.7%), package substrate materials were JPY11.0bn (+14.0%), flexible printed circuit (FPC) board materials were JPY1.2bn (+73.8%), build-up board materials were JPY1.5bn (+32.2%), and other products were JPY4.2bn (+32.7%). Sales of general rigid board materials fell due to an intensifying price competition with local companies in the Chinese market. Segment (regional) performance Sales to external customers by region: Japan, JPY10.2bn (+7.7% YoY, 19.5% of total); China, JPY21.1bn (+5.7%, 40.3%); Taiwan, JPY6.4bn (+5.7%, 12.3%); South Korea, JPY9.8bn (+15.5%, 18.7%); and Others, JPY4.8bn (+21.4%, 9.2%). Sales by region including intragroup sales: Japan, JPY19.8bn (+10.5% YoY; 30.1% of total sales); China, JPY21.5bn (+4.5%; 32.8%); Taiwan, JPY9.1bn (-9.2%; 13.9%); South Korea, JPY10.3bn (+16.4%; 15.6%); and Others, JPY5.0bn (+22.2%; 7.6%). Operating profit by region: Japan, JPY3.4bn (+68.2% YoY); China, JPY4.6bn (+0.4%); Taiwan, JPY1.8bn (+23.8%); South Korea, JPY1.7bn (+30.4%); and Others, JPY514mn (-3.7%). OPM by region: Japan, 17.2%; China, 21.4%; Taiwan, 20.3%; South Korea, 16.2%; and Others, 10.3%. Extraordinary losses: Booking JPY3.3bn on one-time amortization of goodwill (consolidated earnings) Because of tax reforms in Taiwan, a tax deduction for distributing profit surplus which had built up after not distributing surplus in the previous year will no longer be valid as of end-december As such, the company decided to distribute the profit surplus Onstatic Technology Co., Ltd. (OTC) had built up in March Due to the decrease in net assets from this and a calculation of the real value of OTC based on the most recent business plan, the company booked JPY4.2bn in valuation losses on shares of an affiliate in its non-consolidated earnings and JPY3.3bn in one-time amortization of goodwill in the consolidated earnings. For details on previous quarterly and annual results, please refer to the Historical financial statements section. 15/71

16 Research Report by Shared Research Inc. FY03/19 full-year forecasts (at time of FY03/18 earnings announcement) Overview In the electronics components industry, a market related to the company group, demand has continued to be solid for smartphones, servers for virtual currency, and automotive components. There have especially been a large number of inquiries from a set group of customers for servers for virtual currency, and the company expects that strong demand for these products will continue through the summer. According to the company, the sudden growth of flexible printed circuit board materials (FPCs) is driven by the spread of wearable devices. In automotive components, the company has gradually secured certification for its products in not only Japan, but also overseas, and deliveries appear to be progressing smoothly. Dry film has become more profitable as it became more cost competitive with outsourcers by steadily expanding in-house production at its Northern Kyushu factory (contributing to the significant profit growth in Japan). General liquid film struggled due to low prices from local manufacturers in the Chinese market, leading to lower market share. The company acknowledges that it must take some counter-measures during FY03/19 (costs related to these measures included in SG&A expenses). For FY03/19, the company forecasts full-year sales of JPY60.2bn (+15.2% YoY) and an operating profit of JPY9.8bn (-13.6%), assuming an average exchange rate of JPY102/USD for the full year (and JPY105/USD for Q1, JPY103/USD for 1H, JPY100/USD for 2H). Using the same exchange rate assumption of JPY111/USD as the company did for FY03/18, the company forecasts sales of JPY63.8bn (+22.1% YoY) and operating profit of JPY11.4bn (+0.6% YoY). The current exchange rate (as of the end of May 2018) is close to this assumption. YoY change factors analysis In an analysis of the factors leading to YoY changes in sales, the company expects increased volume of solder resist products for printed wiring boards and the impact of an improved sales mix to boost sales up JPY3.3bn (both dry and liquid film contributing half each), the pharmaceutical business to boost sales up JPY6.8bn, and the newly consolidated MNT to boost sales up JPY1.5bn. On the other hand, the company expects yen appreciation in the currency exchange to drive down sales JPY3.6bn (=JPY400mn x JPY9 appreciation). In an analysis of the factors leading to YoY changes in operating profit, the company expects increased volume of solder resist products for printed wiring boards and the impact of an improved sales mix to boost profits by JPY1.2bn. However, the company expects several factors to have a negative impact on YoY operating profit, including SG&A expenses (-JPY700mn), the pharmaceutical business (-JPY343mn, including JPY1.4bn in depreciation expenses on sales rights), the newly consolidated MNT (-JPY100mn, including JPY250mn for amortization of goodwill), and fluctuations in the currency exchange (-JPY1.6bn = JPY178mn x JPY9 appreciation). Expenses required for counter-measures to respond to local companies in the Chinese market (third competitors) are included in the JPY700mn forecasted increase in SG&A expenses. Capital expenditures, M&A The company is conducting M&A in the pharmaceutical field and acquired Micro Network Technologies Corp. (MNT) using low-interest loans and the funds earned from the capital and business alliance with DIC Corp (TSE1: 4631), maintaining its cash position (JPY446mn in cash equivalents at end-march 2018) as it plans for the next deal. Capital expenditures ended at a little over JPY1.5bn (JPY5.0bn in FY03/18 forecasts), and the company plans to spend JPY4.0bn in FY03/19 (around JPY2.0bn in depreciation expenses). 16/71

17 Research Report by Shared Research Inc. Factors impacting FY03/19 company forecasts for sales (YoY) Factors impacting FY03/19 company forecasts for operating profit (YoY) Source: Company data Source: Company data Full-year company forecasts for FY03/19 Income statement FY03/17 FY03/18 FY03/19 FY03/19 (reference) (JPYmn) 1H 2H FY 1H 2H FY 1H Est. 2H Est. FY Est. 1H Est. 2H Est. FY Est. Sales 23,442 24,424 47,866 25,784 26,457 52,241 30,500 29,700 60,200 31,900 31,900 63,800 YoY -7.7% -0.1% -4.0% 10.0% 8.3% 9.1% 18.3% 12.3% 15.2% 23.7% 20.6% 22.1% Gross profit 10,282 11,363 21,645 12,233 12, YoY -10.0% 2.7% -3.7% 19.0% 11.8% 15.2% GPM 43.9% 46.5% 45.2% 47.4% 48.0% 47.7% SG&A expenses 5,725 6,699 12,424 6,489 7, YoY 2.0% 13.4% 7.8% 13.3% 6.1% 9.5% SG&A ratio 24.4% 27.4% 26.0% 25.2% 26.9% 26.0% Operating profit 4,557 4,664 9,221 5,744 5,593 11,337 5,100 4,700 9,800 5,700 5,700 11,400 YoY -21.5% -9.6% -15.9% 26.0% 19.9% 22.9% -11.2% -16.0% -13.6% -0.8% 1.9% 0.6% OPM 19.4% 19.1% 19.3% 22.3% 21.1% 21.7% 16.7% 15.8% 16.3% 17.9% 17.9% 17.9% Non-operating income Non-operating expenses Recurring profit 4,602 4,600 9,202 5,690 5,509 11,199 5,000 4,600 9,600 5,600 5,600 11,200 YoY -21.9% -12.2% -17.3% 23.6% 19.8% 21.7% -12.1% -16.5% -14.3% -1.6% 1.7% 0.0% RPM 19.6% 18.8% 19.2% 22.1% 20.8% 21.4% 16.4% 15.5% 15.9% 17.6% 17.6% 17.6% Extraordinary gains Extraordinary losses 1,021 1, , Pretax profit 4,602 4,154 8,756 5,671 2, Income taxes 897 1,302 2,199 1,628 1, Income taxes current 1,466 1,122 2,588 1,583 1, Income taxes deferred Implied tax rate 19.5% 31.3% 25.1% 28.7% 61.1% 38.0% Net income 3,705 2,852 6,557 4, Net income attrib. to non-controlling interests Net income attrib. to owners of parent 3,623 2,775 6,398 3, ,856 3,500 3,200 6,700 3,900 3,900 7,800 YoY -11.4% -25.2% -17.9% 10.4% -69.1% -24.1% -12.5% 273.0% 38.0% -2.5% 354.5% 60.6% Net margin 15.5% 11.4% 13.4% 15.5% 3.2% 9.3% 11.5% 10.8% 11.1% 12.2% 12.2% 12.2% USD/JPY Note: Figures may differ from company materials due to differences in rounding methods. 17/71

18 Research Report by Shared Research Inc. Historical performance compared with company forecasts Historical performance compared with company forecasts Results versus Initial Est. FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales (Initial Est.) 45,000 43,500 30,000 37,000 44,500 40,500 40,000 45,500 51,500 45,700 46,400 Sales (Results) 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 Results versus Initial Est. 0.8% -25.0% 16.9% 9.1% -10.6% -10.7% 10.6% 6.1% -3.2% 4.7% 12.6% Operating profit (Initial Est.) 9,000 7,000 3,200 5,000 5,600 4,500 6,800 7,700 10,200 8,000 8,100 Operating profit (Results) 8,896 3,332 4,843 5,380 4,040 4,385 7,568 9,254 10,964 9,221 11,337 Results versus Initial Est. -1.2% -52.4% 51.3% 7.6% -27.9% -2.6% 11.3% 20.2% 7.5% 15.3% 40.0% Recurring profit (Initial Est.) 9,000 7,300 3,300 5,000 5,600 4,500 6,800 7,700 10,300 7,800 8,000 Recurring profit (Results) 8,586 3,546 4,787 5,316 4,027 4,743 7,827 9,529 11,129 9,202 11,199 Results versus Initial Est. -4.6% -51.4% 45.1% 6.3% -28.1% 5.4% 15.1% 23.8% 8.0% 18.0% 40.0% Net income (Initial Est.) 6,000 4,700 2,000 3,500 3,800 3,200 4,700 5,000 7,000 5,500 5,600 Net income (Results) 6,171 1,958 3,010 3,402 2,502 3,367 4,930 6,667 7,796 6,398 4,856 Results versus Initial Est. 2.9% -58.3% 50.5% -2.8% -34.2% 5.2% 4.9% 33.3% 11.4% 16.3% -13.3% USD/JPY (Initial Est.) USD/JPY (Results) Results versus Initial Est. -0.8% -1.3% -2.1% -4.7% -0.9% 4.0% 5.3% 10.0% 9.2% 3.8% 11.0% Note: Figures may differ from company materials due to differences in rounding methods. Excluding the impact of the global financial crisis in 2008, differences between actual results and initial company forecasts tend to move more or less in line with the differences between currency fluctuations and assumptions (JPY/USD rates). Difference in historical performance compared with initial company estimates 60.0% Sales Operating profit USD/JPY 40.0% 20.0% 0.0% FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/ % -40.0% -60.0% 18/71

19 Research Report by Shared Research Inc. Medium-term outlook Medium-term management plan: become a comprehensive chemical company In June 2017, Taiyo unveiled a new medium-term management plan covering the three years from FY03/18 through FY03/20. This new plan does not include sales or profit targets, but instead sets minimum target ratios: OPM of a least 20%, ROE of at least 11%, DOE of at least 5%, and record high operating profit. It flags a shift from an emphasis on earnings quantity to quality. The company achieved an OPM in the 20% range in FY03/16, but this figure is the minimum, and all group companies target higher OPM. (Note: this is the first medium-term management plan in seven years. The last medium-term plan was announced in October 2010.) Taiyo did not release medium-term sales and operating profit targets because three-year targets are not optimal for the five- to ten-year business cycle of printed wiring board materials (solder resist), its core business. It worried that three-year sales and earnings targets would lead to short-termism at the management level. The company has released this new medium-term plan to reduce its dependency on solder resist products. Taiyo already has a market share of over 50% for solder resist materials. As overseas sales make up 80% of its solder resist business, it is vulnerable to macroeconomic factors including currency movements and changes in markets for end products such as smartphones and servers. In addition, the company withdrew from the flat panel display (FPD) materials business, previously its second core business, and has yet to develop successful new businesses. To break free of its dependency on solder resist products, Taiyo plans to transform into a comprehensive chemical company and has set targets accordingly. The new medium-term plan has the following nine objectives. Strengthen the profitability of solder resist products Expand printed wiring board (PWB) products other than solder resist Establish the pharmaceutical business as an eventual second earnings driver Make profitable businesses in energy and food production (such as a solar power plant business and a plant factory), for which it has already established subsidiaries Strengthen research capabilities by building an efficient R&D structure; invest over 5% of sales in R&D while maintaining OPM of at least 20% (acquired Chugai Kasei to help strengthen its R&D capabilities) Strengthen balance sheet and access new technologies through capital and business alliance with DIC (DIC paid JPY24.8bn to hold a 19.5% stake in Taiyo) Conduct M&A to launch the pharmaceutical and other businesses Enhance CSR activities Invest in developing and utilizing proactive personnel, and continue to create a work environment that helps retain talented employees 19/71

20 Research Report by Shared Research Inc. Key points of new medium-term business plan NEXT STAGE 2020 Targets 1. Earnings structure OP: over 20% 2. Profitability ROE: over 11% 3. Shareholder returns DOE: over 5% 4. Management performance Exceed its historical high OP * The company's historical high OP was JPY11bn in FY03/16 Objectives 1. Strengthen the profitability of solder resist products 2. Expand non-sr business related to printed wiring board (PWB) 3. Establish pharmaceutical business 4. Make energy and food businesses profitable 5. Enhance fundamental research capability 6. Business alliance with DIC Corporation 7. Execute M&A strategies 8. Expand CSR activities 9. Develop and utilize proactive personnel Capital and business alliance with DIC On February 10, 2017, DIC paid JPY24.8bn to acquire a 19.5% stake in Taiyo (Taiyo is now an equity-method affiliate of DIC). The objectives and overview of the tie-up are as follows. Joint development of new PWB materials such as MIDs (molded interconnect devices) using technology possessed by both the Taiyo Group and DIC Joint development of PWB materials using DIC s advanced resin development technology and pigment dispersion technology In new businesses involving electronics products that DIC is considering entering, improved products that match market needs and swift launch of these products using the Taiyo Group s established links with the industry and assessment technology Outsourced solder resist production to DIC s plants overseas to reduce production costs and improve operating rates at overseas plants DIC is a veteran of the Japanese ink industry with a history of over 100 years. Its FY12/16 sales were 16x those of Taiyo in FY03/17, and operating profit was nearly 6x larger. If this capital and business alliance had taken place between two ink companies it might have been seen as a larger company swallowing the smaller one, but this deal is between companies in different industries, and is a mutually beneficial relationship as Taiyo offers experience in the electronic materials sector (an area DIC is interested in entering). The relationship with DIC is similar to the mutually beneficial capital alliances IBM entered with Intel and Microsoft in the US. Whereas DIC s OPM is just above 7%, Taiyo is significantly more profitable with an OPM of around 20%. Of the roughly JPY24.8bn in funds acquired from the capital alliance, Taiyo plans to spend around JPY8.2bn on M&A and R&D. Uses of funds (JPYbn) Rebuilding the plant in T aiwan and improving productivity (consolidation with OT C T aiwan) 7.5 Dry film line at the Kitakyushu Plant 2.5 Making Onstatic T echnology (OT C) a wholly owned subsidiary 2.5 Rebuilding core IT system 3.0 Improving productivity at the plants in Saitama and in South Korea 1.0 Expanding existing businesses to PWB-related areas through R&D ad M&A Approx. 8.2 Total Approx /71

21 Research Report by Shared Research Inc. Company comparison Taiyo Holdings (4626) DIC (4631) Income statement FY03/16 FY03/17 FY03/18 FY12/15 FY12/16 FY12/17 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Sales 49,843 47,866 52, , , ,427 YoY 3.3% -4.0% 9.1% -1.2% -8.4% 5.1% Operating profit 10,964 9,221 11,337 51,068 54,182 56,483 YoY 18.5% -15.9% 22.9% 24.3% 6.1% 4.2% OPM 22.0% 19.3% 21.7% 6.2% 7.2% 7.2% Recurring profit 11,129 9,202 11,199 48,995 55,797 56,960 YoY 16.8% -17.3% 21.7% 22.7% 13.9% 2.1% RPM 22.3% 19.2% 21.4% 6.0% 7.4% 7.2% Net income attributable to owners of parent 7,796 6,398 4,856 37,394 34,767 38,603 YoY 16.9% -17.9% -24.1% 48.4% -7.0% 11.0% Net margin 15.6% 13.4% 9.3% 4.6% 4.6% 4.9% Per share data (JPY) EPS Dividend per share Payout ratio 32.5% 45.1% 95.0% 20.5% 27.3% 29.4% DOE 6.2% 5.5% 6.4% 3.0% 3.5% Book value per share 1, , ,521 2, , ,329.6 Balance sheet (JPYmn) Total assets 65,464 92, , , , Net assets 45,250 71,846 73, , , Cash flow statement (JPYmn) Cash flows from operating activities 10,546 9,042 8,100 29,113 62,504 54,196 Cash flows from investing activities -6,750-1,063-24,161-9,973-32,202-58,938 Cash flows from financing activities -2,740 20,342 11,319-24,801-26,852 11,375 Financial ratios Cash and cash equivalents 18,385 46,661 41,816 15,113 16,671 17,651 ROA (RP-based) 17.6% 11.7% 11.0% 6.2% 7.3% 7.1% ROE 19.0% 11.2% 6.8% 14.6% 12.9% 13.0% Equity ratio 65.9% 76.9% 65.2% 33.7% 36.4% 37.9% Per employee data (JPYmn) Number of employees 1,202 1,249 20,264 20,481 20,628 Sales per employee Operating profit per employee Other metrics (JPYmn) R&D expenses 2,441 3,235 26,844 26,178 % of sales 4.9% 6.8% 3.3% 3.5% Established September 1953 February 1908 Note: Figures may differ from company data due to differences in rounding methods. Capital and business alliance with DIC Business portofolio of Taiyo HD and DIC Raw materials Upstream processing Downstream processing Market Printing Ink Pigment Paint resin Additives Solid ink Liquid ink Converters Printing, newspapers Publications; packages Fine Chemical Pigment Liquid crystal materials Additives Paints Color filter ink; LC Paints LCD panels Optoelectronics New segment Pigment Epoxy Nanometals Heat dissipation materials PE SR PCB Electronics Polymer Polystyrene Printing resin Epoxy Molding resin Paints SMC BMC Paints Molding Compound Application Materials Pigment Additives Painting resin Molding resin Jet ink Coating process PPS compounds Master batch Printing process Coloring agent Laminating process Molding Printing Molding process Construction; automotive DIC products Taiyo products DIC R&D themes 21/71

22 Research Report by Shared Research Inc. Overview of capital alliance with DIC Type and number of shares Amount paid JPY4,428 per share Total amount paid Approx. JPY24.8bn Increase in capital stock Approx. JPY2.9bn Increase in capital surplus Approx. JPY2.9bn Regarding price per share: Issue price set at JPY4,428, a 10% discount compared to JPY4,920, the closing price on the business day prior to the resolution concerning the third-party allotment. New shares issued (common stock) 1,312,600 Treasury shares disposed (common stock) 4,304,700 Total number of shares 5,617,300 Note: this is more than 90% of the one-month, three-month, and six-month averages. This complies with the Japan Securities Dealers Association s Guidelines Concerning Treatment of Capital Increase by Allotment to a Third Party and is not considered a favorable issue. Becoming an equity-method affiliate of DIC: DIC will hold 19.5% of the voting rights of Taiyo, making Taiyo Holdings an equity-method affiliate. Further, DIC will dispatch one director to the company (proposal submitted to and approved by June 2017 ordinary general meeting of shareholders). Pharmaceutical business strategy On January 5, 2018, the company announced that it had completed a transfer of assets to receive the manufacturing and sales rights of 13 long-listed products from Chugai Pharmaceutical Co. (Chugai Pharmaceutical) for a price of JPY21.3bn, excluding inventories. 13 long-listed products Source: Company data Medium-term forecasts for 13 long-listed products (five-year performance forecasts) FY03/18 FY03/19 FY03/20 FY03/21 FY03/22 FY03/23 Aug-Mar Apr-Mar Apr-Mar Apr-Mar Apr-Mar Apr-Mar (JPYmn) (Year 0) (Year 1) (Year 2) (Year 3) (Year 4) (Year 5) Sales 820 7,592 9,113 8,634 8,362 7,732 Gross profit 820 3,816 4,053 3,920 4,626 4,093 SG&A expenses 811 4,151 3,701 3,388 3,363 2,961 Operating profit ,263 1,132 Amortization of sales rights 353 1,411 1,411 1,411 1,411 1,411 OP before amortization of sales rights 361 1,077 1,763 1,943 2,674 2,543 Source: Company data * Sales for the three months before the transfer of the manufacturing and sales rights (January to March 2018) is the amount after subtracting the manufacturing unit price for Chugai Pharmaceutical and Roche, sales expenses, and processing fees from sales of the 13 long-listed products. * The transfer of manufacturing and sales rights will be conducted in stages from April 2018 and is planned to be completed by December * FY03/19 SG&A expenses include initial expenses of JPY500mn for costs related to manufacturing transfers. * The period of the amortization of goodwill (purchasing price: JPY21.3bn) is 15 years (no generics exist) and 10 years (generics exist). 22/71

23 Research Report by Shared Research Inc. Medium-term strategy Long-listed products: Acquire additional manufacturing and sales rights Regarding manufacturing factories, the company intends to acquire manufacturing factories to shift from outsourcing to in-house production for the company s long-listed products, compile pharmaceutical manufacturing know-how and develop personnel, manufacture products from other companies, and establish factories overseas. In R&D, the company intends to begin R&D at either purchased or company established facilities, and develop in-house products, such as new pharmaceuticals As the purchasing price of long-listed products has fallen due to revisions in pharmaceutical prices, the market is becoming more favorable to purchasers, such as the company, which aims to acquire additional manufacturing and sales rights for long-listed products. The company is aiming for deals worth about JPY20bn. The market for long-listed products will continue to grow as Japanese pharmaceutical companies are focused on discovering new pharmaceuticals. According to the company, there is a high possibility that the pharmaceutical industry may experience a full shift from vertical integration to horizontal division of businesses, a trend which was also seen in the semiconductor industry. In FY03/19, the company plans to acquire factories (both Japanese and overseas factories are being considered) and establish R&D facilities to develop pharmaceuticals. Areas where the company should utilize its strengths Source: Company data Future plans Source: Company data 23/71

24 Research Report by Shared Research Inc. Taiyo Holdings makes systems company a consolidated subsidiary On April 6, 2018, the company announced that it had acquired all shares of Micro Network Technologies Corp. (MNT), making it a consolidated subsidiary. MNT develops software for many industries, from core systems to contracted development of smartphone apps. MNT runs a technology support business using its own systems engineers and a network design and construction business to provide services in the infrastructure realm for servers and networks. By making MNT a consolidated subsidiary, the company was able to establish an environment in which it can dispatch necessary IT personnel at the necessary time. The company also believes that it can increase the speed of new system construction as well as reform IT systems, important business topics for the company, through MNT. Overview of share acquisition One external factor to the share acquisition is the chronic labor shortage for IT personnel. Internally, the company expects rising risks of malfunctions and higher maintenance and operational costs for both hardware and software as 20 years have passed since the company s last large-scale investment in its IT systems. The company identifies IT systems renovation and the construction of new systems as urgent needs. Impact expected from acquisition of systems company At the company group, Taiyo Holdings expects to be able to promptly renovate IT systems and construct new systems, areas of importance for the business, and to acquire knowledge related to software, including IoT, big data, and AI, which had been lacking. At MNT, the company expects strengthened business foundation and proactive investments, as well as an improvement in sales value by acquiring operational knowledge of chemicals manufacturers. Overview of Micro Network Technologies Corp. Source: Company data 24/71

25 Research Report by Shared Research Inc. Business Business description Growth drivers The company's forerunner, Taiyo Ink Mfg., was established in 1953 as a manufacturer and marketer of printing ink. In 1970 Taiyo entered the resist ink field with its first shipment of etching resist products. In 1972 the company succeeded in developing an odorless solder resist using epoxy resin to replace the traditional melamine resin (which emitted formaldehyde when curing). The new product was rated highly for the hardness of the coating film and for being odorless. At the end of 1975 the company s UV curable solder resist (UVR-150G) passed the supplier evaluation of Sony Corp. (TSE1: 6758) and subsequently was adopted by Sony and other major electronics manufacturers including Toshiba Corporation (TSE2: 6502) and Matsushita Electronic Components Co., Ltd. (currently Panasonic Corp; TSE1: 6752), leading to a growth spurt for the company. In 1976, Taiyo decided to drastically shift its business strategy to make solder resist its core growth driver instead of printing ink. What is solder resist?: Protects circuits by preventing shorts due to solder bridges by covering the portion of printed circuit (wiring) boards that do not have solder. In this case, the product is not removed after soldering, but is used as an insulating film. Green is a common color, but in recent years other colors have been used as well. Also known as SR or solder mask, varieties include LPSM (liquid photoimageable solder mask) and DFSM (dry film photoimageable solder mask). The company leverages its execution speed (thanks to its independence), prowess in R&D and marketing, strategic foresight into technological requirement for end products, and rapid expansion in overseas operation, and has received supplier qualifications from multiple large client companies. As a result, for solder resist products, Taiyo has a global market share of over 50% (fairly high share in high-function products, and about half in general products). End products using solder resist include digital consumer electronics, flat-panel TVs, personal computers, semiconductors, smartphones, and automobiles. As use of these products has spread, there has been an increasing need for high-density mounting and improved reliability, and in response the company has been producing a widening variety of increasingly high-function solder resist. Taiyo has an extremely high market share for solder resist materials used to protect semiconductor package surfaces. However, the industry of package substrate materials for semiconductors is seeing rapid technological innovation, such as the FOWLP (Fan Out Wafer Level Package). A single misstep and the company could be easily left behind. Solder resist will remain a growth driver, but there is diminishing scope for Taiyo to increase market share with just a single core product. CEO Eiji Sato recognizes the need to expand beyond solder resist to sustain long-term growth, and has been making preliminary moves to enter other businesses (solar power, food production, and pharmaceuticals). He spearheaded the acquisition of a competitor (Onstatic Technology Co., Ltd. or OTC, based in Taiwan) and an upstream company (Chugai Kasei Co., Ltd.), and also brokered a capital and business alliance with DIC. Still, the company does not yet know which business will become its second core earnings driver. The new medium-term plan drafted by CEO Sato does not include sales or profit targets. Instead, it lays out base figures for margins and capital efficiency: OPM of at least 20%, ROE of at least 11%, DOE of at least 5%, and record high operating profit. By aggregating a number of businesses that meet these criteria, even if they are small, the company aims to create an organization resilient to economic fluctuations and unforeseen events. CEO Sato says that the company works to develop proactive employees and sees that Taiyo s true growth driver is its employees. The company s history embodies the principle that building things requires developing people. The company enjoys a high retention rate; in the company s Suzhou China subsidiary, only a few of its 250 employees leave every year and there is almost zero turnover at its Taiwan subsidiary. 25/71

26 Research Report by Shared Research Inc. Sales and OPM, major business shifts 55,000 Sales OPM (right axis) 35% 50,000 45,000 40,000 35,000 30,000 Jun. 1972: Rolls out S-20 world's first epoxy ink Dec. 1975: UVR-150G adopted by SONY Mar. 1976: Major change in strategy to position solder resist as the core business driver 30% 25% 20% 15% 25,000 May 1970: Enters resist ink market 10% 20,000 5% 15,000 10,000 0% 5,000-5% (JPYmn) % Note: Sales and OPM figures are for fiscal years (e.g., 2016 means FY03/17) Reference: correlation with macro indicators: Plotting the company s YoY sales growth against nominal global GDP growth shows a high degree of correlation. When global GDP growth is positive the company s sales grow at roughly twice the rate of global GDP, and when growth is zero, sales fall by a multiple. The IMF forecasts global GDP growth from 2018 to 2022 to average over 5% per annum in nominal terms (over 3.5% in real terms). If the hypothesis holds, the company can expect sales growth of 7 10% per annum. (Note: the Market and value chain section later in this report discusses the correlation between the company s sales and Japanese companies printed wiring board production, as well as global electronic information industry production.) YoY growth in Taiyo s sales and global GDP 30.0% 25.0% 20.0% 15.0% 10.0% 5.0% 0.0% -5.0% % Global GDP YoY (nominal; USD-based) Taiyo's sales YoY (JPY-based) Source: Shared Research based on company materials and IMF data Note: Sales are for fiscal years (e.g., 2016 means FY03/17) 26/71

27 Research Report by Shared Research Inc. Overview of key products The company regularly reviews its product categorization based on sales. Currently, Taiyo divides products broadly into two groups: insulating materials for PWBs (printed wiring boards) and other related products. The company further breaks down PWB materials into four categories: rigid board materials, semiconductor package substrate materials, FPC (flexible printed circuit board) materials, and build-up wiring board materials. The company then further divides the rigid board category into high-function (PSR-4000 series) and general (such as the PSR-2000 series). Product classifications Field Category Characteristics Application Rigid High-function General Liquid Package Flexible Liquid, dry film Liquid, dry film PWB insulating materials Other related products Build-up Other In FY03/18, rigid board materials accounted for 65.7% of sales (high-function 41.0%, general 24.7%). High-function rigid board materials are used mainly in high-end smartphones, Japanese cars, and tablets. General rigid board materials are used mainly in PCs, LCD TVs, office automation equipment, and industrial equipment. Sales by product (JPY52.2bn in FY03/18) Liquid, dry film Liquid SR materials for surface protection and insulation Build-up materials for interlayer insulation and hole-plugging Materials for marking, etching, and plating; flux, solvent, conductive silver paste Build-up board materials 3% Other related products 8% Flexible board materials 2% Package substrate materials 21% Rigid (highfunction) 41% Rigid (general) 25% Sales of package substrate materials exceeded JPY11.0bn, and are now a mainstay product accounting for 21.1% of sales. Over half of package solder resist sales are dry film, rather than liquid, and have the benefit of uniform thickness measured in microns. Dry film was originally supplied by DuPont (US), but when photoimageable solder resists emerged, there was no technology to affix the dry film to the substrates, so it was supplanted by liquid. Then, around 2000, vacuum laminators for IC card manufacturing emerged, and dry film became used in substrate production as well. At that time, Taiyo launched dry resist products, used in smartphones and tablets. Further, it moved quickly to mass produce a next-generation product (AUS SR1) following qualification by major semiconductor manufacturers. For Taiyo, dry film sales have grown faster than liquid, and have higher margins. Recently, Apple Inc. (US) and other final-stage manufacturers often bypass midstream manufacturers to qualify components themselves. As such, component makers positioned closest upstream risk being left behind if they only meet the standards required by their direct customers. The key to success is constantly anticipating developments at the final-stage manufacturing level and emerging technology trends while enhancing marketing power. Although FPC (flexible printed circuit) and build-up board materials account for only 2.2% and around 2.9% of sales respectively, they are showing fast growth in recent years. There are many FPC applications including smartphones, camera modules, and precision equipment, so it is a growth market, but competition is fierce and the company s market share is still low. The 27/71

28 Research Report by Shared Research Inc. company s build-up board materials are mainly used for plugging holes and have not yet penetrated the interlayer insulation market. Ajinomoto Fine-Techno Co., Inc., a wholly owned subsidiary of Ajinomoto Co., Inc. (TSE1: 2802), has a virtual monopoly in interlayer insulation materials, as it has made its product the de facto standard by being the first to acquire qualification from manufacturers. Taiyo is aware from its own experience of taking the leading share of the solder resist market how difficult it is to penetrate a stronghold such as this. Flat panel display or FPD materials (conductive silver paste used in plasma display panel [PDP] TVs) sales peaked in FY03/12 at JPY12.3bn and have declined in recent years, so in FY03/17 the company included them in its other related products group. Product prices for PDP materials are linked to the price of silver, a raw material. The price of silver rose by a factor of seven, from USD4.9/Troy ounce in 2003 to USD35.2 in Accordingly, this pushed up the company s FPD sales in FY03/12. Still, even if sales expand, it is difficult to improve margins for this product. The company does not disclose OPM by product, but from highest to lowest the order is estimated as package substrate materials, high-function rigid, and general rigid products. This order is the same as the company s global market share: package substrates have an extremely high market share, high-function rigid fairly high share, and general rigid at roughly half. Taiyo s market share (estimates) Field Category Application Global market share Main end products Smartphones (high-end), cars (Japanese), High-function Fairly high tablets Rigid SR materials PC, LCD TVs, electronic office equipment, General High (Around half) industrial equipment PWB insulating materials Sales by product Package Flexible Build-up for surface protection and insulation Interlayer insulation (dry film) Note: Figures may differ from company materials due to differences in rounding methods. Note: From FY03/17, FPD is included in Other related products Note: Operating profit by product category not disclosed. Extremely high Semiconductors Rather low Smartphones, cameras, precision equipment, others (Monopoly by Ajinomoto Fine-Techno) Semiconductors Sales by product FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 PWB insulated materials 33,603 25,918 27,961 29,937 26,727 27,997 38,225 44,474 46,318 44,700 48,041 Rigid board materials 25,392 19,911 21,250 22,993 20,289 20,262 29,235 33,539 35,242 33,216 34,342 High-function 18,676 20,230 20,211 21,429 General 14,863 15,012 13,005 12,913 Substrates and flexible board materials 6,886 5,107 5,600 5,685 5,416 6,763 7,965 9,844 10,007 10,348 12,197 Package substrates 9,401 9,376 9,676 11,029 Flexible boards ,168 Build-up board materials 1, ,111 1,259 1, ,025 1,091 1,069 1,136 1,502 FPD materials 10,238 5,683 6,099 9,455 12,307 7,316 4,554 1, Other related products 1, ,443 1,808 3,231 3,165 4,199 % of sales PWB insulated materials 74.1% 79.5% 79.8% 74.2% 67.2% 77.4% 86.4% 92.2% 92.9% 93.4% 92.0% Rigid board materials 56.0% 61.1% 60.6% 57.0% 51.0% 56.0% 66.1% 69.5% 70.7% 69.4% 65.7% High-function 38.7% 40.6% 42.2% 41.0% General 30.8% 30.1% 27.2% 24.7% Substrates and flexible board materials 15.2% 15.7% 16.0% 14.1% 13.6% 18.7% 18.0% 20.4% 20.1% 21.6% 23.3% Package substrates 19.5% 18.8% 20.2% 21.1% Flexible boards 0.9% 1.3% 1.4% 2.2% Build-up board materials 2.9% 2.8% 3.2% 3.1% 2.6% 2.7% 2.3% 2.3% 2.1% 2.4% 2.9% FPD materials 22.6% 17.4% 17.4% 23.4% 30.9% 20.2% 10.3% 4.1% 0.6% Other related products 3.0% 2.9% 2.8% 2.4% 1.9% 2.4% 3.3% 3.7% 6.5% 6.6% 8.0% YoY 8.1% -28.1% 7.5% 15.1% -1.4% -9.1% 22.2% 9.1% 3.3% -4.0% 9.1% PWB insulated materials 8.4% -22.9% 7.9% 7.1% -10.7% 4.8% 36.5% 16.3% 4.1% -3.5% 7.5% Rigid board materials 5.9% -21.6% 6.7% 8.2% -11.8% -0.1% 44.3% 14.7% 5.1% -5.7% 3.4% High-function 8.3% -0.1% 6.0% General 1.0% -13.4% -0.7% Substrates and flexible board materials 19.4% -25.8% 9.7% 1.5% -4.7% 24.9% 17.8% 23.6% 1.7% 3.4% 17.9% Package substrates -0.3% 3.2% 14.0% Flexible boards 42.4% 6.5% 73.8% Build-up board materials 6.3% -32.1% 23.4% 13.3% -18.8% -4.9% 5.5% 6.4% -2.0% 6.3% 32.2% FPD materials 7.0% -44.5% 7.3% 55.0% 30.2% -40.6% -37.8% -56.6% -85.2% Other related products 22.9% -30.9% 4.4% -2.2% -21.8% 14.3% 66.1% 25.3% 78.7% -10.2% 32.7% 28/71

29 Research Report by Shared Research Inc. Liquid solder resist Dry film solder resist Source: Company data Rigid board Flexible printed circuit board Source: Company data Semiconductor package substrate Build-up substrate Source: Company data Other related products include marking, etching, and plating materials, flux, solvent, conductive silver paste, and FPD (flat panel display) materials. The company also has new businesses including solar power and food production. Sales from the acquisition of Chugai Kasei contributed around JPY1.1bn (11 months) in FY03/16 and JPY1.2bn (12 months) in FY03/17. Chugai Kasei makes and markets resins and pigments, so is more upstream than Taiyo. The company said Chugai Kasei s pigments are used in LCD color filters and recently have been used in aluminum exteriors for major brand smartphones. Taiyo acquired Chugai Kasei for its R&D capabilities. Taiyo spent 2.4% of its sales on R&D in FY03/12, and has steadily increased this ratio every year to reach 6.8% in FY03/17 (5.9% in FY03/18). The company looks to spend at least 5% of sales on R&D while maintaining a high OPM and aims to build a structure where the fruits of its R&D efforts are efficiently used to launch products. 29/71

30 Research Report by Shared Research Inc. The company s subsidiary Taiyo Green Energy Co., Ltd., operates the solar power business, which is a stable source of earnings that generates sales of several tens of millions of yen per annum due to Japan s feed-in tariff (FIT) scheme, which is based on a system of purchasing all output at a fixed price. On August 2, 2017, the company established a subsidiary, Taiyo Pharma Co., Ltd., to enter the pharmaceutical market. The company s internal project team is the core of the new company for now. On November 14, 2017, the company announced that it entered a contract for the transfer of marketing and manufacturing rights of 13 long-listed products from Chugai to Taiyo Pharma. R&D expenses, % of sales 3, % 3, % 7.0% 2,500 2, % 4.9% 5.9% 5.0% 6.0% 5.0% 1,500 1, % 3.0% 2.9% 2.5% 2.4% 3.3% 3.6% 4.0% 3.0% 2.0% % 0 (JPYmn) FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 FY03/19 Est. R&D expenses % of sales (right axis) 0.0% R&D and new development areas Patents and intellectual property strategy Patents can be used to measure how effectively R&D results are being utilized in product launches. The company is focusing on patent acquisition, and employees who submit outstanding patents receive special bonuses. Having a web of patents enables the company to enter cross-licensing agreements with competitors, part of its intellectual property strategy. Looking at patent applications and approvals versus operating profit from 2011 until 2014 (see the following chart), patent approvals rose sharply and operating profit also increased (with a one- or two-year lag). Patent approvals have declined since a peak in 2014, but this seems to be due to the company strengthening its R&D capabilities through acquisitions and alliances, such as acquiring Chugai Kasei and entering an alliance with DIC. Patent applications and acquisitions, and operating profit ,000 10, , , , , Patent applications Patent grants Operating profit (right axis) 0 (JPYmn) Source: Shared Research based on company materials and interviews Note: Aggregate number of patents for Taiyo Holdings and Taiyo Ink Mfg. Note: OP figures are for fiscal years (e.g., 2016 means FY03/17) Acquiring patents under the intellectual property strategy prevents other companies from obtaining the patent rights. The following box shows extracts of a survey by Patent Result Co., Ltd., a patent analysis company. Ajinomoto Fine-Techno, a 30/71

31 Research Report by Shared Research Inc. subsidiary of Ajinomoto Co., Inc. (TSE1: 2802), has a virtual monopoly in interlayer insulation materials used in build-up substrates. The difficulty of breaching this stronghold is underscored by the survey. Based on its own food industry classifications, Patent Result compiled a 2016 ranking of food companies by their ability to prevent other companies from obtaining patent rights in patent review process. Patent Result compiled cases where existing patents by other companies were reasons to reject patent applications in The data clearly show which companies hold numerous leading-edge technologies as competitors work to secure rights for recent technological developments. In order of number of citations, the 2016 rankings were: 1) Ajinomoto (353 cases), 2) Kirin Holdings Co., Ltd. (243), and 3) Meiji Holdings Co., Ltd. (183). Ajinomoto s most cited patent was that for a resin composition used in multilayer printed wiring boards (Patent No ), and was the reason for rejection in 10 cases, including four for Sumitomo Bakelite and two for Taiyo Ink Mfg. Another patent often cited was No regarding production of metabolites using bacteria. The companies most affected by Ajinomoto s patents in 2016 were Kao Corporation and CJ CheilJedang Corporation (South Korea) with nine cases each, followed by Hitachi Chemical Co., Ltd. and Kirin Holdings (eight cases each). Source: Patent Result website R&D activities According to the company s FY03/17 annual securities report, Taiyo s R&D focus areas and results are as follows. Solder resist Key focus areas in rigid board materials HDI (High Density Interconnection) substrates used in smartphones The adoption of the MSAP (Modified Semi-Additive Process) as a method for manufacturing HDI substrates sparked demand for greater-than-ever positioning accuracy, making direct imaging exposure systems using digital exposure mainstream. Also, at the request of large smartphone manufacturers, colors for solder resist used in HDI substrates other than green, such as black and blue, are being used. The Taiyo Group has also been developing high-function solder resist in these colors that can work with direct imaging exposure systems. Shared Research understands that many large manufacturers including Apple and Samsung have adopted it. Automotive substrates There is demand for increasingly diverse characteristics in solder resist for automotive substrates with the emergence of hybrid and electric vehicles. Automotive substrate solder resist must withstand harsh conditions, and its performance in high temperatures is particularly important. The company was able to produce the desired characteristics in solder resist by improving the resin composition. Currently, Taiyo is working toward qualification by the end customer of next-generation solder resist for automotive substrates. The company s solder resist is in wide use after receiving qualification from Japanese automakers, but non-japanese auto manufacturers have yet to increase uptake. The product life of automobiles is around 10 years, and safety is paramount, so once a product is qualified there is little room for other companies to supply their product. 31/71

32 Research Report by Shared Research Inc. Automotive solder resist For integrated mechanical parts, ECUs, sensors, and electric power steering (EPS) For displays and indoor lighting For displays and integrated mechanical parts For ECUs and monitoring systems For advanced driving support systems and comm. systems For rigid flexible PCBs, FPCs, and flat-cables Solder resist for package substrates The company s solder resist for package substrates is commonly used in CSPs (chip scale packages) for SSD memory media as well as memory and application processors for smartphones. The reliability of connections between semiconductor chips and package substrates is an important element in solder resist for package substrates, and demand for dry film is growing each year due to its superior smoothness. Following are specific examples of product development. I. The company developed a matte finish for the solder resist surface in dry film, which was thought to be difficult. It is working to acquire customer qualification. II. The company is developing solder resist that can be used in a variety of sensor types. III. The company is developing solder resist that can effectively dissipate heat generated in the components where it is mounted, which customers are currently evaluating. IV. The company is developing a new solder resist suitable for high-speed telecommunications substrates, which require accurate signal transmission. Interlayer insulating material I. The company has developed a dry film interlayer insulating material used in package substrates, and has made concerted approaches to customers in the Chinese market. Customer evaluation is currently in progress. II. The company is evaluating material for use in passive components as a new market, and is working on uptake among customers. III. As an interlayer insulating material, the company is developing not just dry film but a film with copper foil that can meet new customer needs. Photoimageable coverlay Amid the trend to make smaller and lighter smartphones and tablets, the internal space where circuit boards are installed is shrinking, leading toward growth in demand for soft, flexible substrates and away from the traditional rigid substrates that predominated. The Taiyo Group has developed photoimageable coverlay to simultaneously meet market needs for mechanical properties such as fine processing, heat resistance, and flexibility. Conductive adhesives The company developed anisotropic conductive adhesives, which can be cured quickly at low temperatures, for bonding substrates used in devices such as smartphones and tablets. Using soldering powder in the conductive particles gives greater 32/71

33 Research Report by Shared Research Inc. bonding reliability, and altering the solder powder s particle diameter enables it to deal with the shift to fine pitch. The company has also developed a product that bonds at lower temperatures for materials that are not as heat-resistant. Materials for wearable devices The market for wearable devices has spread beyond accessories such as smart watches and smart glasses, to those that come in direct contact with the body such as activity-measuring devices and conducting textiles used in sports and health care, and biosensors used in medical equipment such as electronic skin devices. As wearable devices are used in close contact with the body, materials used not only need to be flexible, but also stretchable. The company is developing such stretchable conductive materials. Inkjet solder resist The company has developed solder resist for inkjet coating machines, and is conducting assessments with inkjet coating machine manufacturers and customers. Solder resist coating using inkjet coaters is an environmentally friendly way to manufacture substrates. It shortens the drying, exposure, and developing processes, and enables selective coating of necessary areas in a limited space. The company is developing applications other than for solder resist with the same equipment, including plating and etching resist materials, insulating materials for QFPs (Quad Flat Packages), and flexible materials. Photoimageable coverlay Anisotropic conductive adhesive Stretchable conductive paste Inkjet solder resist Pattern made by conductive paste on elestic substrate IJ Patterning Streched 50% Patterning and curing conducted simulatneously 33/71

34 Research Report by Shared Research Inc. Sales by region Trends in the company s sales by region over the past decade can be summed up by shift to China. This coincides with the period where China emerged as the world s electronics workshop. Taiyo purchased Taiwan s OTC (Onstatic Technology Co., Ltd.) in May 2013 and made it a consolidated subsidiary. Following this, the company s sales to China (external customers) grew from 29.5% of the total (FY03/13) to 36.6% (FY03/14), and subsequently reached 41.6% of total sales in FY03/17. This does not mean domestic sales are declining. Domestic sales are still nearly 20% of sales as the company focuses on high-function rigid board materials, package substrate materials, and new materials. OPMs have stayed in the 20% range in China and Taiwan over the past few years (except for Taiwan in FY03/17, which was 14.9%). Note: the company discloses three types of figures for sales by region: external sales only, inter-segment sales or transfers, and regional sales (see the company s annual securities report for details). FY03/18 earnings by segment (by region) Sales to external customers by region: Japan, JPY10.2bn (+7.7% YoY, 19.5% of total); China, JPY21.1bn (+5.7%, 40.3%); Taiwan, JPY6.4bn (+5.7%, 12.3%); South Korea, JPY9.8bn (+15.5%, 18.7%); and Others, JPY4.8bn (+21.4%, 9.2%). Sales by region including intragroup sales: Japan, JPY19.8bn (+10.5% YoY, 30.1% of total); China, JPY21.5bn (+4.5%, 32.8%); Taiwan, JPY9.1bn (-9.2%, 13.9%); South Korea, JPY10.3bn (+16.4%, 15.6%); and Others, JPY5.0bn (+22.2%, 7.6%). Operating profit by region: Japan, JPY3.4bn (+68.2% YoY); China, JPY4.6bn (+0.4%); Taiwan, JPY1.8bn (+23.8%); South Korea, JPY1.7bn (+30.4%); and Others, JPY514mn (-3.7%). OPM by region: Japan, 17.2%; China, 21.4%; Taiwan, 20.3%; South Korea, 16.2%; and Others, 10.3%. 34/71

35 Research Report by Shared Research Inc. Segment information (by region) Segments (regions) FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 Japan 26,866 18,970 20,379 18,491 11,787 13,065 14,005 15,786 17,002 17,917 19,807 China 30,804 21,596 10,361 11,911 10,636 10,834 17,791 20,421 21,820 20,618 21,539 Taiwan 4,083 4,414 3,706 3,936 8,398 9,614 9,854 10,042 9,116 South Korea 10,241 13,743 16,668 11,722 10,599 9,199 7,739 8,825 10,271 Others 1,419 1,205 2,972 3,061 2,618 2,854 3,524 4,140 4,451 4,076 4,979 Eliminations, company-wide expenses -13,751-9,157-12,980-11,254-5,618-6,227-10,093-10,900-11,023-13,612-13,471 % of sales Japan 45.5% 45.4% 42.4% 35.8% 26.0% 30.8% 25.8% 26.7% 27.9% 29.1% 30.1% China 52.1% 51.7% 21.6% 23.1% 23.4% 25.5% 32.8% 34.5% 35.8% 33.5% 32.8% Taiwan 8.5% 8.6% 8.2% 9.3% 15.5% 16.3% 16.2% 16.3% 13.9% South Korea 21.3% 26.6% 36.7% 27.6% 19.5% 15.5% 12.7% 14.4% 15.6% Others 2.4% 2.9% 6.2% 5.9% 5.8% 6.7% 6.5% 7.0% 7.3% 6.6% 7.6% YoY 8.1% -28.1% 7.5% 15.1% -1.4% -9.1% 22.2% 9.1% 3.3% -4.0% 9.1% Japan 2.6% -29.4% 7.4% -9.3% -36.3% 10.8% 7.2% 12.7% 7.7% 5.4% 10.5% China 17.2% -29.9% -52.0% 15.0% -10.7% 1.9% 64.2% 14.8% 6.9% -5.5% 4.5% Taiwan 8.1% -16.0% 6.2% 113.4% 14.5% 2.5% 1.9% -9.2% South Korea 34.2% 21.3% -29.7% -9.6% -13.2% -15.9% 14.0% 16.4% Others -18.4% -15.1% 146.6% 3.0% -14.5% 9.0% 23.5% 17.5% 7.5% -8.4% 22.2% Operating profit 8,896 3,332 4,843 5,380 4,040 4,385 7,568 9,254 10,964 9,221 11,337 Japan 2, , ,685 1,906 2,466 2,254 2,026 3,408 China 6,301 3,059 2,463 2,813 1,751 1,584 2,617 3,507 4,775 4,582 4,602 Taiwan ,427 1,763 2,227 1,492 1,847 South Korea ,073 1,212 1,414 1,275 1,663 Others Eliminations, company-wide expenses YoY 11.7% -62.5% 45.3% 11.1% -24.9% 8.5% 72.6% 22.3% 18.5% -15.9% 22.9% Japan 8.3% -99.3% % 68.8% -2.4% 70.4% 13.1% 29.4% -8.6% -10.1% 68.2% China 13.4% -51.5% -19.5% 14.2% -37.8% -9.5% 65.2% 34.0% 36.2% -4.0% 0.4% Taiwan -20.8% -7.8% 5.7% 187.1% 23.5% 26.3% -33.0% 23.8% South Korea -0.9% -33.7% -8.9% 81.6% 13.0% 16.7% -9.8% 30.4% Others 3.5% -28.8% -32.1% 84.5% 14.3% 18.8% 40.2% 22.5% 7.6% -10.6% -3.7% OPM 19.6% 10.2% 13.8% 13.3% 10.2% 12.1% 17.1% 19.2% 22.0% 19.3% 21.7% Japan 8.5% 0.1% 2.9% 5.5% 8.4% 12.9% 13.6% 15.6% 13.3% 11.3% 17.2% China 20.5% 14.2% 23.8% 23.6% 16.5% 14.6% 14.7% 17.2% 21.9% 22.2% 21.4% Taiwan 15.8% 11.6% 12.7% 12.6% 17.0% 18.3% 22.6% 14.9% 20.3% South Korea 9.6% 7.1% 3.9% 5.0% 10.1% 13.2% 18.3% 14.4% 16.2% Others 18.8% 15.8% 4.3% 7.8% 10.4% 11.3% 12.9% 13.4% 13.4% 13.1% 10.3% Depreciation 1,261 1,127 1,046 1,003 1,181 1,411 1,891 2,485 2,284 Japan , China Taiwan South Korea Others Eliminations, company-wide expenses Increase in tangible and intangible fixed assets ,555 3,321 4,055 1,722 22,513 Japan ,266 2,033 2, China Taiwan South Korea Others ,109 Eliminations, company-wide expenses Number of employees ,148 1,122 1,202 1,249 Avg. temporary employees (not included in above) Japan China Taiwan South Korea Others Company-wide Sales per employee Operating profit per employee Note: Figures may differ from company materials due to differences in rounding methods. Note: FY03/09 and FY03/10 sales figures for China are those for Asia including Taiwan and South Korea. Key manufacturing locations, capex, and utilization by product (as of end-fy03/18) The company s principal manufacturing site is located in Ranzan (Hiki-gun, Saitama Prefecture), where it manufactures high-function rigid solder resist products, package substrate materials, and new products. The location has a technological development building and serves as the company s R&D center. The head office has also been relocated to Ranzan. 35/71

36 Research Report by Shared Research Inc. In order to avoid risks of concentrating domestic production, the company completed another plant, the Kitakyushu Plant, in September 2015 (investment of roughly JPY3.6bn, annual capacity of 1,500 tons of liquid materials, 2.8mn sqm dry film, and expected IRR of 15.4%). The aim was to disperse geographic risk from a BCP (business continuity planning) viewpoint, reducing risk of earthquakes and other disasters, and to be closer to key shipment destinations such as China and South Korea. Subsidiary Taiyo Green Energy has completed a mega-solar project with an investment of roughly JPY400mn (expected IRR: 5.1%). The company has also started cultivating vegetables at a plant factory. Taiyo aims to retain employees by improving the work environment and offering attractive benefits, such as employee cafeterias at three locations and a daycare center in Japan. From FY03/16, Chugai Kasei became a consolidated subsidiary, bringing with it its Nihonmatsu Factory and Urawa Factory as well as R&D facilities. The subsidiary makes and markets dyes (for textiles and leather), functional colorings such as pigments, and specialty chemicals. Capex in Japan: JPY1.3bn in FY03/14; JPY2.0bn in FY03/15; JPY2.6bn in FY03/16; JPY526mn in FY03/17; and JPY542mn in FY03/18. The company s main production facilities overseas are in China (Suzhou), Taiwan, South Korea, and the US (Nevada). Overseas, Taiyo mainly produces high-function rigid products, general rigid products, and customized solder resist products. Domestic locations Taiyo Ink Mfg. Co., Ltd. Head office Ranzan, Hiki-gun, Saitama Chugai Kasei Co., Ltd. Nihonmatsu, Fukushima Micro Network Technologies Corp. Chiyoda-ku, Tokyo Taiyo Holdings Co., Ltd. Ranzan Facility; Taiyo Green Energy Co., Ltd. Ranzan, Hiki, Saitama Taiyo Pharma Co., Ltd. Chiyoda-ku, Tokyo Taiyo Holdings Co., Ltd. Head office Nerima-ku, Tokyo Overseas locations Source: Shared Research edited based on company data 36/71

37 Research Report by Shared Research Inc. Forex impact Half of the company s overseas sales are denominated in US dollars and half in local currencies. Taiyo estimates the full-year impact of a JPY1/USD change in forex rates at over JPY380mn for sales and JPY180mn for operating profit. It said the impact of forex on earnings was increasing because overseas sales of domestically produced high-function rigid and semiconductor materials are taking up an increasing portion of total sales. Taiyo has shifted its production of general solder resist overseas and is working to procure raw materials locally. The company has confined its package substrate material production to Japan to avoid the risk of being copied by overseas competitors. Even if exchange rates and raw material prices (excluding silver) fluctuate, Taiyo s earnings are not affected. This is because the company s products are core components and it has the leading market share, particularly for high-function rigid products, meaning it can set prices to be relatively stable due to qualification from final-stage manufacturers and midstream board manufacturers. Determinants of forex impact as follows. Share of sales in foreign currencies: about 80% Share of expenses in foreign currencies: about 50% Main reasons foreign currency expenses have a smaller share than sales: 1) Advanced R&D is carried out in Japan 2) Advanced products are manufactured in Japan Forex: transactions occur primarily in USD and CNY, but also in other currencies (KRW, NTD, HKD). As currency movements (versus JPY) are primarily from currencies that fluctuate in line with the US dollar, forex sensitivity is calculated using just USD. Source: Shared Research based on company interviews Main group companies (as of May 2018) The Taiyo Group consists of Taiyo Holdings (the company), 17 subsidiaries, and one affiliate. In May 2013 Taiyo purchased its Taiwanese competitor OTC (Onstatic Technology Co., Ltd.) and in June 2015 it acquired Chugai Kasei Co., Ltd., making them consolidated subsidiaries. In December 2014 the company established Taiyo Green Energy Co., Ltd., a solar power generation subsidiary, and in August 2017 established Taiyo Pharma Co., Ltd., a subsidiary to develop and market drugs, to set up new businesses in these areas. In April 2018, the company acquired all shares of Micro Network Technologies Corp (MNT), making it a consolidated subsidiary. 37/71

38 Research Report by Shared Research Inc. Major subsidiaries Consolidated subsidiaries Manufacturing and sales Taiyo Ink Mfg. Co., Ltd. Japan Chugai Kasei Co., Ltd. Japan Taiyo Ink (Suzhou) Co., Ltd. China Products and merchandise Taiwan Taiyo Ink Co., Ltd. Taiwan Onstatic Technology Co., Ltd. Taiwan Taiyo Ink Mfg. Co., (Korea) Ltd. S. Korea T aiyo Holdings Co., Ltd. Sales Taiyo America, Inc. Taiyo Ink International (HK) Limited Taiyo Ink Trading (Shenzhen) Co., Ltd. Other China China Products and merchandise Customers and distributors Taiyo Ink International (Singapore) Pte. Ltd. ROW Taiyo Ink Products Co., Ltd. Non-consolidated subsidiary Taiyo Ink (Thailand) Co., Ltd. Pharmaceuticals and power generation companies Consolidated subsidiaries Taiyo Pharma Co., Ltd. Taiyo Green Energy Co., Ltd. System company Micro Network Technologies Corp. S. Korea Other Japan Japan Japan Technological services Medicine Sell (solar) electric power Electric power companies Customers Fundamental technologies Technology sources, origin Taiyo started out as a manufacturer and marketer of black ink for letterpress printing. Major ink makers, who are also pigment manufacturers, did not produce carbon, the key ingredient in black ink. As such, in raw materials it was possible for the company to compete with these large ink manufacturers just with technical ability and product quality. The company s first encounter with resist ink (the forerunner of solder resist) was in July At that time, a user of Taiyo s plate-making chemicals, Fuji Gosei Kagaku Kenkyujo, made a request for acid resistant ink. The request was for Mylar film to be immersed in concentrated sulfuric acid at 80 degrees Celsius, with only the printed area not dissolved. Manufacturing ink and solder resist are similar in many ways, as they involve taking a wide variety of fine powder materials, mixing them with solvents or resins, kneading, and homogenizing. Expertise and fundamental technologies from these products can be applied to other areas. There are several hundred varieties of solder resist. As such, Taiyo handles multiple products, operating end-to-end production processes from raw material procurement through shipment. The basic manufacturing expertise is in compounding (formulation) and dispersion techniques. The manufacturing process entails weighing and inputting 10 to 20 varieties of raw materials in line with the formulation prescription, pre-mixing in a mixer, using a rolling mill to make the product finer and more homogenous, and finally packaging the product. Using different materials changes the insulation, conductivity, adhesion, heat conduction, UV curing, and thermosetting functions. The company s raw materials are fine powder particles with a diameter of a few microns. While the uses differ, powder particles are handled similarly to those in pharmaceutical and cosmetic manufacturing. Fuji Film Corporation, the subsidiary of Fujifilm Holdings Corp. (TSE1: 4901), saw some success in the pharmaceutical and cosmetics industries because it had the base 38/71

39 Research Report by Shared Research Inc. technologies and the core technologies and manufacturing expertise gained from its manufacture of silver halide photographic film. Similarly, Taiyo is aiming to enter the pharmaceutical industry by leveraging its existing competencies. The company acquired Chugai Kasei for its R&D capabilities. Chugai Kasei develops and manufactures functional pigments including dyes for electronic materials, photosensitive dyes, and specialty pigments. By having a company further upstream under its corporate umbrella, Taiyo has widened its business territories. Fundamental technologies Photolithography Thermal management Element technologies Insulation Adhesion Conduction Comparison with similar and benchmark companies A shift in comparable companies, as Taiyo is on the brink of a third growth period As Taiyo shifts from its second to third growth phase, it should be compared against a different set of companies. During its second growth phase, Taiyo changed course and narrowed its focus to the solder resist industry. Investors who favor growth were interested in Taiyo due to it being an innovation stock and involved in basic materials. An innovation stock is one that creates a market through business renewal and is a leading company in its niche area. In Japan, many of these are upstream (resources and raw materials) companies. Over the past three years Taiyo has had an OPM of around 20%, and at the same time both sales and operating profit were growing by double digits. After the company became the market share leader in the solder resist industry, profit growth rates have plateaued. Still, the company is on the brink of a third growth spurt in light of the aggressive M&A, tie-up with DIC, and move into different business fields spearheaded by CEO Sato. Similar companies to the current Taiyo Similar companies to Taiyo during its second growth phase include JCU (TSE: 4975), Japan Pure Chemical (TSE: 4973), and MEC (TSE: 4971). Each of these companies is in an upstream industry, has one core product, high margins, and an electronic material product with a leading market share. Compared with Taiyo, which is already poised to move into its third phase, these companies are still growing, with relatively shorter histories and lower sales. 39/71

40 Research Report by Shared Research Inc. Comparison with similar companies Taiyo Holdings (4626) JCU (4975) Japan Pure Chemical (4973) MEC (4971) Income statement FY03/16 FY03/17 FY03/18 FY03/16 FY03/17 FY03/18 FY03/16 FY03/17 FY03/18 FY03/16 FY03/17 FY12/17 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Parent Parent Parent Cons. Cons. Cons. Sales 49,843 47,866 52,241 19,818 20,760 23,120 8,429 8,229 10,668 9,078 9,259 9,641 YoY 3.3% -4.0% 9.1% 0.1% 4.8% 11.4% -11.8% -2.4% 2.9% 0.2% 2.0% Operating profit 10,964 9,221 11,337 4,906 5,500 6, ,078 2,185 1,887 1,993 YoY 18.5% -15.9% 22.9% 6.5% 12.1% 12.7% -13.7% -6.0% 4.4% 8.8% -13.6% OPM 22.0% 19.3% 21.7% 24.8% 26.5% 30.1% 11.4% 10.9% 10.1% 24.1% 20.4% 20.7% Recurring profit 11,129 9,202 11,199 4,926 5,502 6,972 1,047 1,002 1,179 2,207 1,888 2,063 YoY 16.8% -17.3% 21.7% 1.9% 11.7% 11.8% -10.9% -4.3% 2.7% 3.7% -14.5% RPM 22.3% 19.2% 21.4% 24.9% 26.5% 30.2% 12.4% 12.2% 11.1% 24.3% 20.4% 21.4% Net income attributable to owners of parent 7,796 6,398 4,856 3,410 4,124 4, ,514 1,642 1,567 YoY 16.9% -17.9% -24.1% 6.4% 20.9% 9.1% -7.8% 1.1% 1.9% 12.7% 8.4% Net margin 15.6% 13.4% 9.3% 17.2% 19.9% 21.2% 8.4% 8.7% 7.8% 16.7% 17.7% 16.3% Per share data (JPY) EPS Dividend per share Payout ratio 32.5% 45.1% 95.0% 24.8% 22.0% 24.1% 65.9% 64.3% 55.5% 23.6% 23.6% 26.9% DOE 6.2% 5.5% 6.4% 5.8% 5.4% 5.7% 5.4% 5.2% 4.5% 2.9% 3.0% 3.1% Book value per share 1, , , , , , Blanace sheet (JPYmn) Total assets 65,464 92, ,490 22,208 26,095 32,266 9,619 11,153 13,420 15,715 17,993 19,247 Net assets 45,250 71,846 73,023 15,704 18,457 22,996 8,494 9,548 11,101 12,250 13,110 14,587 Cash flow statement (JPYmn) Cash flows from operating activities 10,546 9,042 8,100 3,123 4,847 5, ,796 1,633 1,591 Cash flows from investing activities -6,750-1,063-24,161-1,057-1,579-1, ,372-2, Cash flows from financing activities -2,740 20,342 11,319-1,510-1, , Financial ratios Cash and cash equivalents 18,385 46,661 41,816 6,799 8,764 12,234 4,039 3,797 4,093 3,422 3,723 3,664 ROA (RP-based) 17.6% 11.7% 11.0% 22.5% 22.8% 23.9% 10.3% 9.7% 9.6% 14.5% 11.2% 11.1% ROE 19.0% 11.2% 6.8% 23.4% 24.3% 23.7% 8.1% 8.0% 8.1% 12.5% 13.0% 11.3% Equity ratio 65.9% 76.9% 65.2% 70.4% 70.5% 71.1% 87.6% 85.0% 82.0% 78.0% 72.9% 75.8% Per employee data (JPYmn) Number of employees 1,202 1, Avg. temporary employees (not included in above) Sales per employee Operating profit per employee Other R&D expenses 2,441 3,235 3,089 1,145 1, % of sales 4.9% 6.8% 5.9% 5.8% 5.2% 2.8% 2.7% 8.8% 9.7% Established September 1953 April 1968 July 1971 May 1969 Note: Figures may differ from company materials due to differences in rounding methods. Benchmark companies Taiyo benchmarks itself against companies that represent its near-term future, such as Nissan Chemical Industries Ltd. (TSE1: 4021) and Nippon Kayaku Co., Ltd. (TSE1: 4272). Both of these are in the chemical industry and have a history of over 100 years, sales of more than three times that of Taiyo, high R&D-to-sales ratios and OPMs, and several major sources of earnings such as pharmaceuticals. Both have lasted for more than 100 years, one of Taiyo s goals, and are also prime examples of where the company hopes to see itself in the future. Companies Taiyo looks to as examples Taiyo is just starting to transition from a leading company in a niche area to a comprehensive chemicals manufacturer. That said, being a member of the DIC group positions Taiyo at roughly fifth in the chemical industry, in line with Asahi Kasei Corp. (TSE1: 3407) and Nitto Denko Corp. (TSE1: 6988). We will see whether CEO Sato can use its alliance with DIC to grow the company, similar to how Intel and Microsoft grew thanks to alliances with IBM. CEO Sato says there is much to learn from overseas companies. Regarding human resources, he looks at the way 3M Company (US) treats its employees (refer to the comments in the following box). Further, in order to anticipate the direction of final demand, the company looks at the business development of upstream materials companies and downstream companies such as Google and Apple, and aims to enhance its marketing strategies to reach these companies. 3M is a long-established company known for numerous innovative products including Post-it Notes and Scotch Tape. The hit-producing company has a 15% culture, under which engineers can spend up to 15% of their working hours studying a field of interest. The company also has management indicators such as new products share of total sales and numerous other value creating arrangements. The company s technological capabilities can be seen in the sheer number of products it handles (currently around 55,000 types). 3M has roughly 90,000 employees worldwide, around 8,300 in R&D, which gives a good indication of how many products the company develops. 3M s policies and track record are also widely lauded, and in Booz&Co. s 2013 Global Innovation 1000 Study, 3M was ranked fifth, following the renowned companies of Apple, Google, Samsung (South Korea), and Amazon. Of these top five companies, only 3M has a history of over 100 years. Source: HR Tech, 3M Japan 40/71

41 Research Report by Shared Research Inc. Benchmark companies FY (consolidated) Income statement FY03/16 FY03/17 FY03/18 FY03/16 FY03/17 FY03/18 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales 49,843 47,866 52, , , , , , ,888 YoY 3.3% -4.0% 9.1% 3.3% 1.9% 7.3% 0.7% -2.3% 5.5% Operating profit 10,964 9,221 11,337 28,606 31,438 34,988 21,713 19,646 22,606 YoY 18.5% -15.9% 22.9% 12.9% 9.9% 11.3% -2.6% -9.5% 15.1% OPM 22.0% 19.3% 21.7% 16.2% 17.4% 18.1% 13.3% 12.3% 13.5% Recurring profit 11,129 9,202 11,199 29,531 31,713 36,235 21,016 19,947 22,471 YoY 16.8% -17.3% 21.7% 11.9% 7.4% 14.3% -16.5% -5.1% 12.7% RPM 22.3% 19.2% 21.4% 16.7% 17.6% 18.7% 12.9% 12.5% 13.4% Net income attributable to owners of parent 7,796 6,398 4,856 22,350 24,026 27,142 17,291 15,635 15,472 YoY 16.9% -17.9% -24.1% 22.8% 7.5% 13.0% 10.5% -9.6% -1.0% Net margin 15.6% 13.4% 9.3% 12.6% 13.3% 14.0% 10.6% 9.8% 9.2% Per share data EPS Dividend per share Payout ratio 32.5% 45.1% 95.0% 30.7% 33.1% 37.7% 31.2% 33.2% 33.6% DOE 6.2% 5.5% 6.4% 4.5% 5.0% 6.1% 2.8% 2.7% 2.6% Book value per share 1, , ,521 1, , , , , ,203.1 Balance sheet (JPYmn) Total assets 65,464 92, , , , , , , ,565 Net assets 45,250 71,846 73, , , , , , ,602 Cash flow statement (JPYmn) Cash flows from operating activities 10,546 9,042 8,100 29,989 32,491 37,691 19,603 31,390 20,121 Cash flows from investing activities -6,750-1,063-24,161-8,416-13,152-15,244-5,090-11,913-16,171 Cash flows from financing activities -2,740 20,342 11,319-17,317-19,042-20,268-9,432-14,103-6,241 Financial ratio Cash and cash equivalents 18,385 46,661 41,816 35,335 35,701 37,702 47,464 51,785 50,532 ROA (RP-based) 17.6% 11.7% 11.0% 13.1% 13.8% 15.1% 7.8% 7.3% 8.0% ROE 19.0% 11.2% 6.8% 14.6% 15.1% 16.1% 9.2% 8.2% 7.7% Equity ratio 65.9% 76.9% 65.2% 68.1% 69.9% 70.1% 69.3% 71.1% 72.1% Per employee data (JPYmn) Number of employees 1,202 1,249 2,371 2,402 5,188 5,517 Avg. temporary employees (not included in above) Sales per employee Operating profit per employee Others (JPYmn) Note: Figures may differ from company materials due to differences in rounding methods. Taiyo Holdings (4626) Nissan Chemical (4021) Nippon Kayaku (4272) R&D expenses 2,441 3,235 3,089 15,778 16,078 13,000 13,900 % of sales 4.9% 6.8% % 8.9% 8.0% 8.7% Established September 1953 February 1887 June /71

42 Research Report by Shared Research Inc. Earnings analysis Profitability FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 Cost of sales 29,512 22,635 24,123 28,428 29,822 25,319 28,348 28,865 27,355 26,220 27,304 Cost ratio 65.1% 69.4% 68.8% 70.4% 74.9% 70.0% 64.1% 59.8% 54.9% 54.8% 52.3% Gross profit 15,826 9,979 10,932 11,938 9,974 10,864 15,875 19,394 22,487 21,645 24,937 Cost ratio 34.9% 30.6% 31.2% 29.6% 25.1% 30.0% 35.9% 40.2% 45.1% 45.2% 47.7% Operating profit 8,896 3,332 4,843 5,380 4,040 4,385 7,568 9,254 10,964 9,221 11,337 OPM 19.6% 10.2% 13.8% 13.3% 10.2% 12.1% 17.1% 19.2% 22.0% 19.3% 21.7% EBITDA 10,453 4,766 6,142 6,533 5,100 5,406 8,917 10,918 13,135 11,947 16,813 EBITDA margin 23.1% 14.6% 17.5% 16.2% 12.8% 14.9% 20.2% 22.6% 26.4% 25.0% 32.2% Net income attributable to owners of parent 6,171 1,958 3,010 3,402 2,502 3,367 4,930 6,667 7,796 6,398 4,856 Net margin 13.6% 6.0% 8.6% 8.4% 6.3% 9.3% 11.1% 13.8% 15.6% 13.4% 9.3% Financial ratios ROA (RP-based) 17.8% 7.9% 11.3% 12.3% 9.6% 11.2% 15.3% 15.9% 17.6% 11.7% 11.0% ROE 16.5% 5.4% 8.7% 9.9% 7.5% 9.7% 12.8% 16.7% 19.0% 11.2% 6.8% Total asset turnover Working capital (JPY mn) 7,896 6,585 7,536 7,586 7,848 7,398 10,845 11,975 11,087 11,592 13,686 Current ratio 390.2% 450.3% 383.7% 360.3% 412.6% 401.2% 423.0% 343.2% 361.0% 593.6% 333.7% OCF / Current liabilities Net debt / Equity 24.7% 22.5% 21.2% 23.0% 19.4% 18.9% 39.2% 55.9% 48.3% 29.3% 54.0% OCF / Total liabilities Cash conversion cycle (days) Change in working capital -2,209-1, ,447 1, ,094 Note: Figures may differ from company materials due to differences in rounding methods. EBITDA = operating profit + depreciation + goodwill amortization Total assets and ROA (RP-based) Shareholders equity and ROE (JPYmn) Total assets ROA (RP-based; right axis) (JPYmn) Total shareholders' equity ROE (right axis) 120, ,000 80,000 60,000 40,000 20, % 7.9% 12.3% 11.3% 9.6% 11.2% 15.3% 15.9% 17.6% 11.7% 11.0% 20.0% 18.0% 16.0% 14.0% 12.0% 10.0% 8.0% 6.0% 4.0% 2.0% 0.0% 80,000 70,000 60,000 50,000 40,000 30,000 20,000 10, % 5.4% 8.7% 9.9% 7.5% 19.0% 16.7% 12.8% 9.7% 11.2% 6.8% 20.0% 18.0% 16.0% 14.0% 12.0% 10.0% 8.0% 6.0% 4.0% 2.0% 0.0% Operating profit margin and EBITDA margin Cash conversion cycle 35.0% OPM EBITDA margin 32.2% 30.0% 26.4% 25.0% 25.0% 23.1% 22.6% 20.2% 20.0% 17.5% 22.0% 21.7% 19.6% 16.2% 19.2% 19.3% 14.6% 14.9% 15.0% 12.8% 17.1% 90 (Days) % 5.0% 0.0% 13.8% 13.3% 12.1% 10.2% 10.2% /71

43 Research Report by Shared Research Inc. Market and value chain Size of target markets The company s mainstay product, solder resist, is a basic material essential to protect the surface of printed wiring boards, the heart of all devices in the electronic information industry. The market drivers have moved from personal computers, digital consumer electronics, and flat-panel displays, to smartphones. In recent years applications for printed wiring boards have spread to automobiles, robots, and medical equipment. The industry is growing, and facing a growing variety of requirements in terms of cost and functionality demanded by the market. In terms of the industry value chain, Taiyo is positioned upstream (resources and raw materials). Compared with midstream (product development and manufacturing) and downstream (marketing and sales) companies, upstream companies are niche companies that single-handedly supply certain resources and raw materials and reap benefits from the added value. As shown in the following graph, printed wiring board (PWB) production by Japanese companies and Taiyo s sales move in close step. Compared to the 2007 peak, domestic production of PWBs by Japanese corporations has more than halved, while overseas production has doubled. Total value has trended sideways and has not topped the peak levels of The company has developed production centers in Asia, brought a Taiwanese competitor under its corporate umbrella, and progressively shifted to overseas production. Taiyo has also cultivated overseas customers and entered other industries, and is working to transform its structure so that it does not rely on the PWB market alone. PWB production by Japanese companies and Taiyo Holdings sales 2,500.0 Overseas production Domestic production Taiyo sales (right axis) , , , (JPYbn) F 2018F 2019F 0.0 (JPYbn) (JPYbn) F 2018F 2019F Domestic production 1, , , , , Overseas production Total Japanese production 1, , , , , , , , , , , , , , , ,585.3 Taiyo Holdings sales % of total Japanese production 2.0% 2.3% 2.4% 2.4% 1.9% 2.7% 2.7% 2.9% 2.7% 3.4% 3.5% 3.1% 3.3% 3.4% Source: Shared Research, based on JPCA statistics and company data (including estimates) Note: JPCA statistics are for calendar years, excluding Taiyo Holdings sales, which are for its fiscal year (e.g., 2015 means FY03/16) Note: Definition and scope of overseas production for Japanese companies does not cover only consolidated entities but also those where Japanese companies have management rights, regardless of shareholding percentage. In 2016, global electronic information industry production in yen terms was JPY284.2tn (-8.6% YoY). This was due to slowing growth in smartphones, which had been the driver in developed economies and in China, and the effect of yen strength when sales figures were translated into yen. Japanese PWB manufacturing also declined to JPY1.5tn (-10.3% YoY). Meanwhile, Taiyo s FY03/17 sales were JPY47.9bn (-4.0%). For 2017, the Japan Electronics and Information Technology Industries Association (JEITA) forecast 2.6% YoY growth in global electronic information industry production value, due to rising demand for cars with driver assist technology, as well as moves to apply AI, sensors, and actuators in a variety of industrial fields. Meanwhile, the Japan Electronics Packaging and Circuits Association (JPCA) forecast Japanese PWB production value to rise by 3.4% YoY in 2017 and the company s FY03/18 sales forecast is +4.5% YoY. Taiyo s sales basically follow PWB production by Japanese companies and global electronic information industry production. Recently, fluctuations in Taiyo s sales have been less drastic than the YoY fluctuations of sales in relevant industries. This can be assumed to be because the company s products are basic materials used in upstream processes, meaning it does not directly feel the impact of changes in downstream demand. Long-term contracts with customers mean price movements are relatively small. 43/71

44 Research Report by Shared Research Inc. Global electronic information industry production (Japanese companies PWB production value vs Taiyo Holdings sales) (JPY100mn, %) (JPYbn) Act. Act. Estimated Forecast IT solution services 75,707 82,335 81,214 85,182 Semiconductors 35,432 40,555 36,443 37,656 Display devices 15,184 15,983 13,061 13,650 Electronic components 21,733 23,760 22,200 22,820 Other electronic equipment 13,322 14,563 13,848 14,439 Computers and terminals 46,975 49,592 44,145 44,754 Communication equipment 55,983 66,748 58,029 57,756 Audio and visual equipment 15,695 17,325 15,306 15,357 T otal (global electronic equipment production) 280, , , ,613 Japanese companies' production of PWB 1,399 1,608 1,443 1,492 % of global electronic equipment production 0.5% 0.5% 0.5% 0.5% Taiyo Holdings sales % of total Japanese PWB production 3.5% 3.1% 3.3% 3.4% YoY IT solution services 8.0% 8.8% -1.4% 4.9% Semiconductors 19.5% 14.5% -10.1% 3.3% Display devices 11.2% 5.3% -18.3% 4.5% Electronic components 10.8% 9.3% -6.6% 2.8% Other electronic equipment 7.4% 9.3% -4.9% 4.3% Computers and terminals 1.5% 5.6% -11.0% 1.4% Communication equipment 19.6% 19.2% -13.1% -0.5% Audio and visual equipment -3.2% 10.4% -11.7% 0.3% T otal (global electronic equipment production) 10.0% 11.0% -8.6% 2.6% Japanese companies' production of PWB 6.0% 15.0% -10.3% 3.4% Taiyo Holdings sales 9.1% 3.3% -4.0% 4.5% 75,707 82,335 81,214 85,182 Source: Shared Research, based on JEITA and JPCA statistics and company data (includes estimates) Note: All figures are for calendar years, excluding Taiyo Holdings sales, which are for its fiscal year (e.g., 2015 means FY03/16) 15,695 55,983 46,975 21,733 15,184 35, Act. 17,325 66,748 49,592 23,760 15,983 15,306 58,029 44,145 22,200 13,061 15,357 57,756 44,754 22,820 13,650 40,555 36,443 37, Act. Audio and visual equipment Computers and terminals Electronic components Semiconductors 2016 Estimated 2017 Forecast Communication equipment Other electronic equipment Display devices IT solution services Market growth potential Smartphone market growth potential In 2016, there were 1.5bn global smartphone shipments (+3.1% YoY), a sudden deceleration from the double-digit growth seen through This was due to a slump by leading companies Apple and Samsung. Sales of Apple s new iphone 7 and iphone 7 Plus stagnated, while phones catching fire hurt Samsung s sales. Smartphone companies from Greater China still have some momentum. There is expected to be some impact from new product launches in 2017, but the smartphone market is facing a structural issue of near saturation (penetration is 79.0% in China, 74.0% in the UK, 72.0% in the US, and 67.0% in Nigeria). Of the 38 countries surveyed, 36 had penetration rates of over 50%. (Source: AUN Consulting, Inc.) The market is now primarily replacement demand, making it difficult to generate new demand. Global smartphone shipments (mn units) 1,600 (mn) (CY, mn units) F Samsung ,400 Others Apple LG Huawei ,200 SONY Oppo TCL Vivo ,000 Lenovo ZTE Xiaomi Xiaomi ZTE Lenovo TCL Vivo SONY Oppo LG Huawei Others Apple Total 735 1,038 1,274 1,431 1,476 1,511 Samsung YoY % 22.7% 12.3% 3.1% 2.4% F Source: Shared Research based on data from Electronic Device Industry News Technological trends for smartphone PCBs FOWLP (Fan Out Wafer Level Package) In 2016 there was a major development in smartphone substrates. Previously, smartphone processors used Flip Chip Scale Packages (FCCSPs), which were seen as the new battlefield for semiconductor package substrates, instead of personal computer CPUs. However, iphone 7 and iphone 7 Plus employed InFO (Integrated Fan-Out), a Fan Out Wafer Level Package (FOWLP) developed by Taiwan Semiconductor Manufacturing Company Limited (TSMC), the largest semiconductor foundry. This positioned the semiconductor package industry at a crossroads. In other words, FOWLP made the traditional semiconductor package substrate unnecessary, as it enabled simultaneous formation of packages for semiconductors with a redistribution layer 44/71

45 Research Report by Shared Research Inc. (RDL) with a chip on top of a silicon wafer. In fact, Ibiden Co., Ltd. (TSE1:4062), which had been supplying FCCSP substrates for Apple s application processors, was forced to respond through modified semi additive process (MSAP) methodology (see the following paragraph). InFO is a means for TSMC, a semiconductor manufacturer, to make inroads in its core wafer foundry business. (Previously, TSMC and Samsung Electronics Co., Ltd. split contract manufacturing of Apple s application processors (APs), but it appears that TSMC has become the sole supplier for iphone 7, iphone 7 Plus, iphone 8, iphone 8 Plus, and iphone X.) Switch to MSAP (Modified Semi Additive Process) Production methods for the main substrate of the new iphones released at the end of 2017 (iphone 8, iphone 8 Plus, and iphone X) appear to have changed dramatically. Instead of the traditional subtractive method, an MSAP is employed to create plated circuits. MSAP enables a 30% reduction in main substrate area via miniaturization of the circuits. The new iphone (iphone X) uses organic LED (OLED) on its main screen. As battery capacity increases, it has been necessary to shrink the main substrate area. In the HDI substrate manufacturing process using MSAP, positioning accuracy is more important than before so direct exposure systems (which use digital exposure) have come into general use. Printed wiring board manufacturing processes: The subtractive process starts with copper clad laminate, and then removes the unneeded copper foil by dissolving it with a chemical, leaving the desired pattern. Dissolving the copper foil with chemicals is also known as etching, and is the mainstream printed wiring board manufacturing process. The additive process starts with a laminate without copper foil, then involves precipitating and fixing the conductive material to form the pattern. There are also conductive paste printing and semi-additive processes (a combination of both the subtractive and additive processes). Source: OK Print Corporation Printed wiring board technology required for automotive, smartphone, and wearable applications Automotive PWB technology requirement Smartphone PWB technology requirement ADAS ADAS camera camera Impedance control PWB Converter and inverter Heavy-cu PWB Communication module HDI PWB Anylayer PWB Flex-Rigid PWB Cloud server Embedded devices PWB Telecom base station ADAS radar Power module High layer count PWB Milimeter wave radar PWB Power module PWB Metal base PWB Cu-core PWB Cu-inlay PWB Semi flex and FR4-flex Source: Shared Research based on Meiko Electronics Co., Ltd. data Automobile market growth potential Automobile penetration rates per 1,000 people are 846 in US, 714 in Australia, 611 in Japan, and 598 in Germany; that is, over 50% of the population own automobiles in developed economies in the West and Japan. On the other hand, motorcycle penetration is high in emerging markets: one of every three people in Thailand and Malaysia, one of every six in Greece, and one of every 15 in China (as of end-2015, source: Japan Automobile Manufacturers Association). Automobiles, like smartphones, are mainly seeing replacement demand, but forecasts are for a rapid switch to electric vehicles amid mounting environmental concerns and falling battery prices. Also, for conventional fossil fuel-powered (internal combustion) vehicles, the spread of advanced driver assist systems such as automatic brakes and automated driving systems is forecast to lead to acceleration in installed electronics. For the printed wiring board industry, automobile demand is still an untapped area, unlike the mature smartphone market. Head light Junction box Brake and steering Cable FPC Main board Anylayer PWB 45/71

46 Research Report by Shared Research Inc. Due to several factors, electric vehicles look likely to close the gap with conventional fossil fuel automobiles in the near future in terms of driving range, convenience, and price. As battery technology advances, driving ranges are becoming longer and charging times shorter. Furthermore, battery prices are dropping. Bloomberg New Energy Finance forecasts that sales of electric vehicles will outstrip those of fossil fuel-powered vehicles by Global electric vehicle sales forecasts (mn units) Electric vehicle battery price forecasts (mn) (USD; Per kw/h) USD109 USD73 Source: Shared Research based on Bloomberg New Energy Finance Recently, the UK and France have announced bans on fossil fuel-powered automobile sales from The Indian government announced its intention to regulate the sale of fossil fuel-powered automobiles from The Chinese government also appears to be considering when to switch to new energy vehicles (NEVs). Automobile makers and conglomerate auto parts manufacturers will have to respond, and Toyota Motor Corporation (TSE1: 7203), which had been hesitant regarding electric vehicles, announced its entry into the market and appears ready to install its high-function solid-state battery currently under development in automobiles in Fully solid-state batteries are similar to lithium-ion batteries in structure, but have a solid, not liquid, electrolyte (such as ceramics). Furthermore, they do not require separators, so there is a smaller risk of fluid leaks or abnormal ignition, and opportunities in terms of major reductions in charging times and further driving ranges. Technological issues in automotive printed wiring boards Printed wiring boards (PWBs) for automotive applications need to be much more durable than for smartphones and tablets. Requirements include the ability to withstand high temperatures and impacts and a longer product life. Furthermore, automobiles must clear safety and environmental regulatory hurdles. Accordingly, automobile manufacturers subject component makers to rigorous, conservative qualification processes. Once a company is qualified, automobile manufacturers are unlikely to switch to another manufacturer for 10 years or so. Car prices are x those of smartphones, and have a much longer product life. Electrical equipment is used in a number of applications, including information systems, the body, powertrain, and driving safety. With forecasts of increasing electronics use in cars, this is the most important new frontier for electronics components and PWB manufacturers to seize the first mover advantage. Technological trends PWBs are used in all electronic equipment including smartphones, PCs, servers, and audiovisual equipment. They play an important role in making electrical connections between the semiconductors, electronic components, sensors, and other components that are installed in these electronic devices and help them function as system circuitry. They are akin to the capillaries and neural circuits that extend throughout the body in humans. Solder resist that insulates and protects the wiring parts from the external environment can be compared to skin or mucous membranes. As electronic equipment such as smartphones and wearable devices gets smaller and more sophisticated, PWBs face increasing requirements to be compact, thin, and supple. The Apple watch does not have a main substrate similar to a motherboard, but rather something called S1 (SiP, System in Package), a highly integrated module substrate just 2.5sq cm. This is a coreless substrate with a bare chip semiconductor and passive components directly installed and sealed with resin. Further, to prevent parts from interfering with each other, it is covered with sputtered metal material. 46/71

47 Research Report by Shared Research Inc. In 2016 the value of domestic PWB production growth by product category was as follows: flexible and module PWBs fell by double digits YoY and multilayer PWBs fell by a single digit YoY, primarily in build-up board products. Meanwhile, rigid flexible, ceramic, and metal core PWBs grew by double digits YoY. From 2017 onward, the JPCA forecast build-up module and flexible PWBs to resume growing, and for multilayer wiring boards also to return to growth, driven by build-up PWBs with 10 layers or more. In the past, amid constant change in the computer and information device industry, the key driver shifted from general purpose computers to minicomputers, office computers, personal computers, and smartphones. The printed wiring board industry also faced continuous demand for new technology. The upstream solder resist industry felt the effects of these constant changes in the downstream and midstream sectors. Recently, an increasing number of downstream companies are directly qualifying materials of companies further upstream. The key to survival is increasingly keeping an eye on the direction of technological trends and always staying one step ahead. Domestic PWB production by category and forecasts (JPYbn) Printed wiring board (PWB) Module boards F 2018F 2019F Single sided PWB Double sided PWB Four layers Six layes Eight layers Ten layes or more SUM Four Six Eight Ten or more SUM Bulild-up, % of multilayer 31.1% 29.6% 26.2% 30.1% 24.8% 25.0% Single sided Double sided Multilayer Build-up boards Multilayer PWB Flexible printed boards Build-up Build-up, % of flex SUM Flex rigid Ceramics Metal core Others Total 5.6% 6.2% 6.3% 6.8% 5.9% 6.1% Rigid Tape Ceramics Build-up Build-up, % of module Total Total PWB and module boards T otal build-up % of total PWB and module boards % 72.3% 68.2% 70.3% 66.6% 67.4% % 33.3% 31.8% 34.5% 31.1% 31.9% Source: Shared Research based on JPCA data Note: Build-up figures are totals for build-up products in the PWB and module board categories Barriers to entry As with the chemical and pharmaceutical industries, building barriers to entry in the solder resist industry with an intellectual property strategy via patents is fundamental. Taiyo has high market share in high-function liquid resist products for rigid PWBs and dry film for package substrates using its patents. Meanwhile, in interlayer insulating materials for build-up circuit boards, the company is blocked by other companies (Ajinomoto Fine-Techno) patents. In this environment, with a web of patents a company can aim for cross licensing agreements with competitors. A major barrier to entry is handling high-function materials in addition to general materials. Taiyo was previously involved in a fierce market share war with OTC in Taiwan. CEO Sato visited OTC s largest shareholder, Unimicron Technology Corp., and made a direct takeover proposal to the CEO of OTC. The offer was immediately rebuffed, but two years later OTC caved in and Taiyo succeeded in bringing its largest competitor under its umbrella. CEO Sato saw that Taiyo was highly profitable and had a high share in high-function products, which OTC did not have. Taiyo was not going to lose to low-priced general products. As such, the company s M&A strategy was a success. 47/71

48 Research Report by Shared Research Inc. Competitive environment In solder resist alone, Taiyo has a global market share of over 50%. However, solder resist is merely one variety of the company s insulating materials for PWBs. For insulating materials overall, the company s market share is around 20 40%. As new technologies emerge, instead of looking at solder resist as a single market, the definition of the market can be broadened to include interlayer insulating materials and other insulating materials for electronics. As such, there are no concerns from the viewpoint of antimonopoly law, and the company s acquisition of OTC did not violate Taiwan s antimonopoly legislation. Following is a list of companies involved in solder resist. Huntsman International LLC is a major US chemical manufacturer. In May 2017, it agreed to buy Clariant in a share swap deal, giving rise to a giant chemical manufacturer. Huntsman has qualification from a wide range of overseas car manufacturers and is the supplier of solder resist for automotive printed wiring boards for Bosch. Ajinomoto Fine-Techno is a subsidiary of the major food manufacturer Ajinomoto. Until now Taiyo has effectively built up its market share as the leading independent player in the niche market of solder resist, but if considering insulating materials overall, the market is several times larger, leaving more room for major corporations to enter. The alliance with DIC is partly to give Taiyo more strength to handle competition with major corporations. Japanese manufacturers: Asahi Chemical Research Laboratory Co., Ltd., Ajinomoto Fine-Techno, Ube Industries Ltd. (TSE1: 4280), Goo Chemical Co., Ltd. (TSE2: 4962), San-ei Kagaku Co., Ltd., Sanwa Chemical Industrial Co., Ltd., Tamura Corporation (TSE1: 6768), Toagosei Co., Ltd. (TSE1: 4045), Nikko-Materials Co., Ltd., Nippon Polytech Corp., Hitachi Chemical (TSE1: 4217), Fujifilm (wholly owned subsidiary of Fujifilm Holdings Corp. [TSE1: 4901]), Taiyo Ink Mfg. (wholly owned subsidiary of Taiyo Holdings) Non-Japanese manufacturers: E. I. du Pont de Nemours and Company, Electra Polymers Ltd, Elga Europe S.R.L., MacDermid, Inc. (MacDermid Enthone Electronics Solutions), Eternal Chemical Co., Ltd., Huntsman International LLC (Huntsman Advanced Materials LLC), Jiang Su Kuangshun Photosensitivity New-material Stock Co., Ltd., Lackwerke Peters GmbH&Co. KG, LG Chem Ltd., Nan Ya Plastics Corporation, Rogers Corporation, Seoul Chemical Research Laboratory Co., Ltd., Sun Chemical Corporation (wholly owned subsidiary of DIC), Onstatic Technology (wholly owned subsidiary of Taiyo Holdings) Source: Shared Research based on Japan Marketing Survey data 48/71

49 Research Report by Shared Research Inc. Strengths and weaknesses Strengths Rapid growth and high margins as the leading upstream player in niche solder resist business: Taiyo has fully leveraged the speed enabled by being independent, as well as its development and marketing prowess and strategic foresight. It has received supplier qualifications from large domestic manufacturers by anticipating final demand and expanding rapidly overseas. Taiyo has a global market share of over 50% for solder resist (fairly high share for high-function rigid products and about half for general products). It has an extremely high share of the market in materials for semiconductor packages. OPM has trended at around 20% since FY03/15. When a final-stage manufacturer or board manufacturer qualifies a product, prices and supply become relatively stable. Industry leaders such as Taiyo are well-placed to win customer loyalty, enabling them to maintain high market share and margins, as well as negotiate favorable prices in procuring raw materials through economies of scale. Speed of top-management decisions and a modern approach to financial management: After his appointment in April 2011, CEO Sato made a series of bold moves: purchased Taiwanese competitor OTC, acquired Chugai Kasei, brokered an alliance with DIC, and established subsidiaries in new business areas. With a background in consulting and accounting, he emphasizes the financial perspective in management, which has unified the company, as well as HR development, which enables swift decision-making. In a rapidly changing market, delegating authority to subsidiaries is crucial for nimble decision-making. Still, to avoid a loss in group cohesiveness stemming from too much delegation, Taiyo is streamlining global communications by developing proactive employees and by recruiting non-japanese to work at the head office (over 8% of HQ employees are non-japanese). Retention rates at overseas subsidiaries are high (in the Suzhou China subsidiary, only a few out of 250 employees quit every year, and almost none quit in Taiwan). Shuichi Omi, who holds CPA qualifications in Japan and Vietnam, acts as a kind of CFO in his capacity as executive officer and general manager, administration division. Synergies from a proactive capital and business alliance: The company s balance sheet was already strong, but the capital alliance with DIC generated about JPY24.8bn, which Taiyo is using to strengthen existing businesses and enter new businesses. If this alliance had taken place between two ink companies, it might have been seen as DIC, the larger company, swallowing Taiyo. But this deal is across different industries and is a mutually beneficial relationship, as Taiyo has experience in the electronic materials sector, an area that DIC wants to enter. Weaknesses Dependence on solder resist, a mature product that lies in the shadow of the end-products it is used in: Solder resist, the company s main product, is subject to external factors including forex and market trends of smartphones and other end-products. The company has exited the FPD business, formerly its second core business, making it even more reliant on solder resist. Taiyo aims to escape this reliance and become a comprehensive chemical company by entering the energy, food production, and pharmaceuticals markets, but it is still at the starting point in these areas. Lack of personnel to stay ahead of technological innovation: Market development and technological innovation is accelerating, amid a shift in the core products that use PWB materials and trends toward miniaturization and sophistication. Taiyo has established a solid position in soldier resist used as a protective film, but lags in interlayer insulating materials. It also has yet to receive qualifications from overseas car manufacturers. The company is focusing on training proactive personnel, but unlike larger, more general companies, it does not have as many employees to stay ahead of the trends in technological innovation. Limited demonstrated ability to develop new businesses outside of its core strength: An overly successful existing business makes the company a victim of its own success. Taiyo sets high hurdles when trying to develop new core businesses, meaning new businesses are lagging. The company s number of patent approvals has been declining from a peak of 99 in 2014, to 56 in 2015 and 55 in We assume this is because Taiyo was focusing on enhancing R&D through the acquisition of Chugai Kasei and the alliance with DIC. Still, relying on others can be a double-edged sword. 49/71

50 Research Report by Shared Research Inc. Historical performance Q3 FY03/18 results Historical performance and financial statement Markets In the electronic parts industry, the group s core market, demand for automotive components, smartphones, and servers increased. Topics of interest The yen, at JPY112/USD was weaker than the expected rate of JPY108/USD Sales volume of general rigid board materials declined, but sales volume of dry film and flexible printed circuit (FPC) board materials rose YoY Taiyo revised up consolidated full-year forecasts Taiyo Pharma announced the acquisition of 13 long-listed products Overview of company earnings Aided by both rising sales volumes and a weaker yen, sales for cumulative Q3 rose 8.6% YoY to JPY39.0bn and operating profit rose 21.0% YoY to JPY8.7bn; the OPM rose to 22.3% versus 20.0% during the same period last year. In cumulative Q3 the forex rate fell by JPY4 to JPY112/USD from JPY108/USD during the same period last year. For Q3 alone, sales of JPY13.2bn were up 6.1% YoY and operating profit of JPY3.0bn was up 12.3% YoY; the OPM rose to 22.3% versus 21.1% during the same period last year. Progress Sales have reached 76.1%, operating profit has reached 80.5%, recurring profit has reached 80.9%, and net income attributable to owners of parent has reached 81.1% of the company s forecasts. Causes of YoY changes Sales and operating profit grew YoY on increased sales volume of dry film (contributed +JPY554mn to sales and +JPY304mn to operating profit) and foreign-exchange impact and changes in the product mix (contributed +JPY2.7bn to sales and +JPY1.3bn to operating profit), despite the negative impact of a decline in sales volume of liquid solder resist for printed wiring boards (-JPY126mn to sales and -JPY65mn to operating profit). Sales by product category Sales of high-function rigid board materials were JPY16.3bn (+7.6% YoY), general rigid board materials were JPY9.9bn (+0.8%), package substrate materials were JPY8.0bn (+12.0%), flexible printed circuit (FPC) board materials were JPY920mn (+75.2%), build-up board materials were JPY1.1bn (+36.0%), and other products were JPY2.7bn (+13.7%). Segment (regional) performance Sales to external customers by region: Japan, JPY7.5bn (+5.7% YoY, 19.3% of total); China, JPY16.2bn (+9.8%, 41.6%); Taiwan, JPY5.0bn (+2.3%, 12.7%); South Korea, JPY7.3bn (+17.2%, 18.6%); and Others, JPY3.0bn (+2.5%, 7.8%). Sales by region including intragroup sales: Japan, JPY14.5bn (+12.4% YoY, 30.2% of total); China, JPY16.6bn (+12.4%, 33.7%); Taiwan, JPY7.1bn (-8.1%, 14.3%); South Korea, JPY7.6bn (+18.2%, 15.5%); and Others, JPY3.1bn (+3.6%, 6.4%). Operating profit by region: Japan, JPY2.7bn (+89.9% YoY); China, JPY3.6bn (+2.0%); Taiwan, JPY1.5bn (+10.1%); South Korea, JPY1.3bn (+34.3%); and Others, JPY226mn (-42.2%). 50/71

51 Research Report by Shared Research Inc. OPM by region: Japan, 18.4%; China, 21.7%; Taiwan, 20.9%; South Korea, 17.0%; and Others, 7.2%. In Japan and China, rigid printed wiring board (PWB) materials for automotive and other applications were solid, and semiconductor package substrate materials performed well, primarily for high-end smartphones In Taiwan, rigid printed wiring board materials for automotive components performed well In South Korea, package substrate materials performed well, primarily for high-performance smartphones and servers In Others, rigid printed wiring board materials performed in line with last year but profits fell below those of last year due to increased expenditure involved in the initiation of the pharmaceutical business Source: the company s annual securities report Key points Sales of general rigid board materials declined due to loss of market share resulting from initiatives of competitors (local businesses in the Asia region). Taiyo Holdings policy is to work on countermeasures that involve the introduction of new products at reduced cost, rather than lowering the price of existing products. The company recognizes the need to halt the erosion of its market share of general, as local businesses are more likely to advance into high-end products if they develop capability in general purpose products. Sales of dry film for package substrates are increasing steadily in terms of volume and value. That the company has a very high market share is a driver of growth, with the increasing usage of dry film for package substrate. Increased volume and smooth production at the company s Kitakyushu Plant were major factors contributing to increased profit. The large increases in profit in Japan and South Korea are largely attributable to dry film. Others include Taiyo America, Inc., Chugai Kasei Co., Ltd., Taiyo Green Energy Co., Ltd., and Taiyo Pharma Co., Ltd. In December 2017 Taiyo Green Energy Co., Ltd. began operating the Ranzan Onuma Floating Solar Power Plant. All of the electricity generated by the plant is used for the operation of Taiyo Ink Mfg. s Saitama Plant, and corresponds to approximately 5% of the total electricity used by that plant. This approach follows the intent and policy of major clients to preferentially procure materials from businesses that actively implement environmental policies. The company is also bolstering various other ESG initiatives, such as donating solar power equipment regionally in response to emergency, operating a plant factory from which it sells locally, and taking local children into its office nursery. Taiyo Pharma Co., Ltd. recorded expenses (investigation, consultation, etc.) in relation to the execution of the transfer of the marketing and manufacturing rights of 13 long-listed products from Chugai Pharmaceutical. As manufacture and marketing approvals will be transferred sequentially between April 2018 and December 2018, the substantial recording of sales will be from FY03/19. The company is progressing concrete arrangements relating to one of the objectives of the capital and business alliance with DIC, namely outsourcing solder resist production to DIC s plants overseas to reduce production costs and improve operating rates at overseas plants. It seems that it is not only the production of solder resist that is to be outsourced to DIC s plants overseas, but also the production of pharmaceutical products. R&D expenses R&D spending was JPY2.3bn (5.8% of sales, +5.6% YoY). 51/71

52 Research Report by Shared Research Inc. 1H FY03/18 results Business environment In the US, business conditions remained solid and a gentle economic recovery continued. The economy has stayed steady in Europe and kept up a mild recovery. However, the Chinese economy lacked vigor, with slowing growth in production, exports, investment, and consumption. In Japan, a mild recovery in personal consumption continued amid favorable employment and income conditions. Real global GDP growth forecasts for 2017 and 2018 by the International Monetary Fund (IMF) released on October 10 call for +3.6% and +3.7% YoY growth, each up 0.1pp from the previous April and July forecasts. For the US, the IMF forecasts growth at +2.2% YoY in 2017 (up 0.1pp) and +2.3% in 2018 (up 0.2pp). Topics of interest Yen rate (JPY/USD) was in line with forecasts. 1H assumption: JPY111/USD Sales volumes increased YoY overall, driven by dry film Costs improved on enhanced negotiating clout in outsourcing due to increased operating rates at Kitakyushu Plant and bringing dry film production in-house Taiyo revised up consolidated full-year forecasts Taiyo established a subsidiary (Taiyo Pharma Co., Ltd.) Markets Demand was solid for automotive components, smartphones, and servers in the electronic parts industry, the main area in which the group operates. Overview of company earnings In 1H FY03/18, Taiyo s sales were JPY25.8bn (+10.0% YoY) and operating profit JPY5.7bn (+26.0%) on increased sales volume and a weaker yen. The OPM improved from 19.4% in 1H FY03/17 to 22.3%. The forex rate fell by JPY5 YoY from JPY106/USD to JPY111/USD. Causes of YoY changes Sales and operating profit grew YoY on increased sales volume of liquid solder resist for printed wiring boards (contributed +JPY179mn to sales growth and +JPY91mn to operating profit); increased sales volume of dry film for semiconductor packages (+JPY395mn to sales, +JPY215mn to operating profit); and foreign-exchange impact and changes in the product mix (+JPY1.8bn to sales, +JPY881mn to operating profit). Sales by product category Sales of high-function rigid board materials were JPY10.9bn (+7.7% YoY), general rigid board materials were JPY6.6bn (+3.7%), package substrate materials were JPY5.1bn (+13.5%), build-up board materials were JPY750mn (+40.2%), flexible printed circuit (FPC) board materials were JPY562mn (+70.3%), and other products were JPY1.8bn (+17.2%). Uses of the company s products Main applications for the company s high-function rigid board materials are automotive, smartphones (high-end), and tablets. General rigid board materials are used in general consumer electronics such as LCD TVs and low-priced smartphones that do not require supplier qualification. Package substrate materials are used in semiconductors. The market for general rigid board materials has stagnated and the company s response to new competitors from China appears to have been too late, leading to a dip in market share. Build-up board materials used to plug holes (liquid product) are performing well, but dry film used in interlayer insulating has yet to establish a track record. Flexible printed circuit (FPC) board materials still make up a small share of sales, but liquid material used in high-end smartphones has grown strongly. The company has received qualification for its dry film FPC board materials. Small-scale shipments have started and the company expects further increase in shipments to get underway in 2H. Other product sales include sales by subsidiaries Chugai Kasei Co., Ltd. and Taiyo Green Energy Co., Ltd. 52/71

53 Research Report by Shared Research Inc. Segment (regional) performance Sales to external customers by region: Japan JPY4.9bn (+4.2% YoY, 19.0% of total sales); China JPY10.8bn (+7.9% YoY, 42.0% of sales); Taiwan, JPY3.2bn (+12.1% YoY, 12.5% of sales); South Korea, JPY4.8bn (+23.2% YoY, 18.6% of sales); and Others, JPY2.0bn (+5.5% YoY, 7.9% of sales). Sales by region including intragroup sales: Japan, JPY9.6bn (+11.3% YoY, 29.6% of sales); China, JPY11.1bn (+6.1% YoY, 34.2% of sales); Taiwan, JPY4.6bn (+10.9% YoY, 14.2% of sales); South Korea, JPY5.0bn (+23.6% YoY, 15.6% of sales); and Others, JPY2.1bn (+5.4% YoY, 6.5% of sales). OPM by region: Japan, 17.0%; China, 22.2%; Taiwan, 21.0%; South Korea 16.8%; and Others, 10.2%. In Japan, rigid printed wiring board (PWB) materials for automotive and other applications were solid, and semiconductor package substrate materials performed well, primarily for high-end smartphones In China and Taiwan, rigid PWB materials for automotive components performed well In South Korea, automotive rigid PWB materials slumped on declining market share of South Korean automobiles in China. However, package substrate materials performed well, primarily for high-end smartphones. Source: the company s annual securities report R&D expenses R&D spending was JPY1.6bn (6.0% of sales, +22.0% YoY). Forecast revisions released with Q2 earnings announcement Taiyo revised up its full-year FY03/18 forecasts (for the second time, following revisions with the Q1 earnings announcement). This reflected higher demand and a weaker yen versus initial forecasts. Taiyo revised its currency assumption for the full year from JPY106/USD to JPY108/USD. The company estimates the full-year impact of a JPY1/USD change in the forex rate at over JPY350mn on sales and over JPY150mn on operating profit. The company increased its full-year sales forecasts by JPY1.8bn, from JPY48.2bn (+0.7% YoY) to JPY50.0bn (+4.5%). It raised full-year operating profit forecasts by JPY1.0bn, from JPY9.2bn (-0.2%) to JPY10.2bn (+10.6%). The company revised its currency assumption for 2H from JPY100/USD to JPY105/USD, sales from JPY23.2bn to JPY24.2bn, operating profit from JPY4.0bn to JPY4.5bn. The company has not revised 2H forecasts regarding volume. Taiyo planned to use the funds (roughly JPY24.8bn) and improved R&D capability from the alliance with DIC (TSE1: 4631) to boost full-year capex to roughly JPY5bn and to maintain the R&D-to-sales ratio in line with the previous year at 6.6% (about JPY3.3bn), forecasting an OPM of 20.4%. The company expected depreciation expenses of roughly JPY2bn. 53/71

54 Research Report by Shared Research Inc. Full-year company forecasts (as of Q2) Income statement FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) FY FY 1H 2H FY 1H 1H 2H 2H Old Est. Old Est. New Est. Note: Figures may differ from company materials due to differences in rounding methods. FY Old Est. FY New Est. Sales 48,260 49,843 23,442 24,424 47,866 25,000 25,784 23,200 24,216 48,200 50,000 YoY 9.1% 3.3% -7.7% -0.1% -4.0% 6.6% 10.0% -5.0% -0.9% 0.7% 4.5% Gross profit 19,394 22,487 10,282 11,363 21,645 12,233 YoY 22.2% 15.9% -10.0% 2.7% -3.7% 19.0% GPM 40.2% 45.1% 43.9% 46.5% 45.2% 47.4% SG&A expenses 10,139 11,522 5,725 6,699 12,424 6,489 YoY 22.1% 13.6% 2.0% 13.4% 7.8% 13.3% SG&A ratio 21.0% 23.1% 24.4% 27.4% 26.0% 25.2% Operating profit 9,254 10,964 4,557 4,664 9,221 5,200 5,744 4,000 4,456 9,200 10,200 YoY 22.3% 18.5% -21.5% -9.6% -15.9% 14.1% 26.0% -14.2% -4.5% -0.2% 10.6% OPM 19.2% 22.0% 19.4% 19.1% 19.3% 20.8% 22.3% 17.2% 18.4% 19.1% 20.4% Non-operating income Non-operating expenses Recurring profit 9,529 11,129 4,602 4,600 9,202 5,100 5,690 4,000 4,410 9,100 10,100 YoY 21.7% 16.8% -21.9% -12.2% -17.3% 10.8% 23.6% -13.0% -4.1% -1.1% 9.8% RPM 19.7% 22.3% 19.6% 18.8% 19.2% 20.4% 22.1% 17.2% 18.2% 18.9% 20.2% Extraordinary gains Extraordinary losses 32 1,021 1, Pre-tax profit 9,920 11,137 4,602 4,154 8,756 5,671 Income taxes 2,947 3, ,302 2,199 1,628 Income taxes current 2,670 2,855 1,466 1,122 2,588 1,583 Income taxes deferred Implied tax rate 29.7% 27.0% 19.5% 31.3% 25.1% 28.7% Net income 6,972 8,128 3,705 2,852 6,557 4,043 Net income attrib. to non-controlling interests Net income attrib. to owners of parent 6,667 7,796 3,623 2,775 6,398 3,600 3,998 2,800 3,002 6,400 7,000 YoY 35.2% 16.9% -11.4% -25.2% -17.9% -0.6% 10.4% 0.9% 8.2% 0.0% 9.4% Net margin 13.8% 15.6% 15.5% 11.4% 13.4% 14.4% 15.5% 12.1% 12.4% 13.3% 14.0% JPY/USD Q1 FY03/18 results Business environment In the US, corporate investment is slowing down, but a mild economic recovery continued amid a recovery in consumer spending due to an improved labor market. Europe was seeing a solid economic recovery against a backdrop of a mild recovery in consumer spending. Economic growth is slowing in China, although expansion continues. In Japan, personal consumption and the economy continued to recover gradually amid favorable employment and income conditions. Forecasts for 2017 by the International Monetary Fund (IMF) released on July 24 call for global economic growth of +3.5% YoY, unchanged from the figures released in April, but with a wider difference among regions. Forecasts for the US were trimmed by 0.2pp from April to +2.1% YoY and those for the UK by 0.3pp to +1.7%. Meanwhile, forecasts for Japan were lifted by 0.1pp to +1.3% and those for the euro zone by 0.2pp to +1.9%. IMF forecasts maintained accelerating growth in China and in emerging and developing economies, with growth forecasts revised up by 0.1pp each to +6.7% and +4.6% respectively. (Note: on October 10, the IMF revised its 2017 and 2018 forecasts for global GDP growth, raising the forecasts by 0.1pp to 3.6% and 3.7% YoY growth, respectively.) Topics of interest Yen rate (JPY/USD) was weaker than assumed. Actual: JPY112/USD versus forecast of JPY100/USD (announced May 2, 2017) Sales volumes increased YoY overall, driven by dry film Taiyo revised up consolidated 1H and full-year forecasts Taiyo announced establishment of subsidiary (Taiyo Pharma Co., Ltd.) Markets Demand was solid for automotive components and smartphones in the electronic parts industry, the main area in which the group operates. 54/71

55 Research Report by Shared Research Inc. Overview of company earnings In Q1 FY03/18, Taiyo s sales were JPY12.4bn (+9.9% YoY) and operating profit JPY2.7bn (+26.9%) on increased sales volume amid global economic expansion and a weaker yen. The OPM improved from 18.9% in Q1 FY03/17 to 21.8%. The JPY/USD rate depreciated by JPY3 YoY from JPY109/USD to JPY112/USD. Causes of YoY changes Sales and operating profit grew YoY on increased sales volume of liquid solder resist for printed wiring boards (contributed +JPY251mn to sales growth and +JPY128mn to operating profit); increased sales volume of dry film for semiconductor packages (+JPY260mn to sales, +JPY141mn to operating profit); and foreign-exchange impact and changes in the product mix (+JPY608mn to sales, +JPY306mn to operating profit). Sales by product category Sales of high-function rigid board materials were JPY5.3bn (+10.1% YoY), general rigid board materials were JPY3.2bn (+1.6%), package substrate materials were JPY2.5bn (+18.1%), build-up board materials were JPY344mn (+25.1%), flexible printed circuit (FPC) board materials were JPY214mn (+32.9%), and other products were JPY869mn (+10.3%). Uses of the company s products Main applications for the company s high-function rigid board materials are smartphones (high-end), tablets, and automotive (Japanese car manufacturers). General rigid board materials are used in consumer electronics such as LCD TVs. Package substrate materials are used in semiconductors. Build-up board materials are mainly used to plug holes, not for interlayer insulating at this point. FPC board materials still make up a small share of sales, but applications are expanding amid the trend toward miniaturization. Other product sales include sales by subsidiaries Chugai Kasei Co., Ltd. and Taiyo Green Energy Co., Ltd. Segment (regional) performance Sales to external customers by region: Japan JPY2.5bn (+1.5% YoY, 19.7% of total); China JPY5.1bn (+6.4%, 40.8%); Taiwan, JPY1.6bn (+13.3%, 12.8%); South Korea, JPY2.3bn (+29.1%, 18.1%); and Others, JPY1.1bn (+8.6%, 8.5%). Sales by region including intragroup sales: Japan, JPY4.7bn (+15.7% YoY, 30.0% of total); China, JPY5.2bn (+5.1%, 33.5%); Taiwan, JPY2.2bn (+11.4% 14.3%); South Korea, JPY2.4bn (+29.0%, 15.2%); and Others, JPY1.1bn (+9.3%, 6.9%). OPM by region: Japan, 17.2%; China, 22.0%; Taiwan, 21.8%; South Korea 15.5%; and Others, 11.6%. In Japan, rigid printed wiring board (PWB) materials for automotive and other applications were solid, and semiconductor package substrate materials performed well, primarily for high-end smartphones In China and Taiwan, rigid printed wiring board materials for automotive components performed well In South Korea, automotive rigid printed wiring board materials slumped on declining market share of South Korean automobiles in China. However, package substrate materials for semiconductors performed well, primarily those for high-end smartphones. Source: the company s annual securities report R&D expenses R&D spending was JPY741mn (6.0% of sales, +21.9% YoY). Forecast revisions released with Q1 earnings announcement Taiyo revised up its 1H and full-year FY03/18 forecasts. This reflected higher demand and a weaker yen versus initial forecasts. Taiyo revised its 1H currency assumptions from JPY100/USD to JPY111/USD, and from JPY100/USD to JPY106/USD for the full year. The company estimates the full-year impact of a JPY1/USD change in the forex rate at over JPY350mn on sales and over JPY150mn on operating profit. The company increased its 1H and full-year sales forecasts by JPY1.8bn, from JPY23.2bn (-1.0% YoY) to JPY25.0bn (+6.6%) for 1H and from JPY46.4bn (-3.1%) to JPY48.2bn (+0.7%) for the full year. It raised 1H and full-year operating profit forecasts by 55/71

56 Research Report by Shared Research Inc. JPY1.1bn, from JPY4.1bn (-10.0%) to JPY5.2bn (+14.1%) for 1H and from JPY8.1bn (-12.2%) to JPY9.2bn (-0.2%) for the full year. This means Taiyo left its 2H assumptions unchanged (with the assumption of JPY100/USD also unchanged). Taiyo planned to use the funds (roughly JPY24.8bn) from the alliance with DIC (TSE1: 4631) to boost full-year capex to roughly JPY5bn. The company also aimed to maintain the R&D-to-sales ratio in line with the previous year at 6.8% (about JPY3.3bn) and forecast an OPM of 19.1%. The company expected depreciation expenses of roughly JPY2bn. R&D expenses: Until the Kitakyushu Plant (completed in October 2015) begins full-scale operations, the plant s expenses will be included in R&D spending, meaning temporarily higher R&D expenses. Full-scale shipments are expected by the end of FY03/18, so from FY03/19, these expenses (roughly JPY800mn) will be shifted from R&D to cost of sales. Source: Shared Research through company interviews Full-year company forecasts (as of Q1) Income statement FY03/15 FY03/16 FY03/17 FY03/18 Q2 Est. 1H Old Est. 1H New Est. 2H Old Est. (JPYmn) FY FY 1H 2H FY Q1 Note: Figures may differ from company materials due to differences in rounding methods. 2H New Est. FY Old Est. FY New Est. Ref. (Old Est.) Sales 48,260 49,843 23,442 24,424 47,866 12,425 12,575 23,200 25,000 23,200 23, ,700 YoY 9.1% 3.3% -7.7% -0.1% -4.0% 9.9% 3.6% -1.0% 6.6% -5.0% -5.0% -3.1% 0.7% 3.8% Gross profit 19,394 22,487 10,282 11,363 21,645 5,880 YoY 22.2% 15.9% -10.0% 2.7% -3.7% 17.7% GPM 40.2% 45.1% 43.9% 46.5% 45.2% 47.3% SG&A expenses 10,139 11,522 5,725 6,699 12,424 3,166 YoY 22.1% 13.6% 2.0% 13.4% 7.8% 10.9% SG&A ratio 21.0% 23.1% 24.4% 27.4% 26.0% 25.5% Operating profit 9,254 10,964 4,557 4,664 9,221 2,714 2,486 4,100 5,200 4,000 4, ,700 YoY 22.3% 18.5% -21.5% -9.6% -15.9% 26.9% 2.8% -10.0% 14.1% -14.2% -14.2% -12.2% -0.2% 5.2% OPM 19.2% 22.0% 19.4% 19.1% 19.3% 21.8% 19.8% 17.7% 20.8% 17.2% 17.2% 17.5% 19.1% 19.5% Non-operating income Non-operating expenses Recurring profit 9,529 11,129 4,602 4,600 9,202 2,683 2,417 4,000 5,100 4,000 4, ,600 YoY 21.7% 16.8% -21.9% -12.2% -17.3% 24.6% -1.3% -13.1% 10.8% -13.0% -13.0% -13.1% -1.1% 4.3% RPM 19.7% 22.3% 19.6% 18.8% 19.2% 21.6% 19.2% 17.2% 20.4% 17.2% 17.2% 17.2% 18.9% 19.3% Extraordinary gains Extraordinary losses 32 1,021 1, Pre-tax profit 9,920 11,137 4,602 4,154 8,756 2,664 Income taxes 2,947 3, ,302 2, Income taxes current 2,670 2,855 1,466 1,122 2,588 1,025 Income taxes deferred Implied tax rate 29.7% 27.0% 19.5% 31.3% 25.1% 30.0% Net income 6,972 8,128 3,705 2,852 6,557 1,865 Net income attrib. to non-controlling interests Net income attrib. to owners of parent 6,667 7,796 3,623 2,775 6,398 1,844 1,756 2,800 3,600 2,800 2, ,700 YoY 35.2% 16.9% -11.4% -25.2% -17.9% -1.7% 0.5% -23% -1% 1% 1% -12% 0% 5% Net margin 13.8% 15.6% 15.5% 11.4% 13.4% 14.8% 14.0% 12.1% 14.4% 12.1% 12.1% 12.1% 13.3% 13.5% JPY/USD /71

57 Research Report by Shared Research Inc. FY03/17 full-year results Business environment In North America, a gentle economic recovery continued amid ongoing robust personal consumption and a rebound in corporate investment. In Europe, despite several terrorist incidents, personal consumption was solid, underpinning a mild economic recovery. Meanwhile in China, a decline in housing investment growth and strong pressure to reduce excess production capacity was cause for caution about the future, but solid personal incomes underpinned growth. In Japan, while improvements lagged in some areas, a moderate economic recovery continued. Topics The forex (JPY/USD) rate was in line with assumptions (as of the forecast revision on January 24, 2017) at JPY109/USD (JPY120.1/USD in FY03/16) Slight YoY increase in full-year sales volumes Cost increase following completion of Kitakyushu Plant in September 2015 Impairment loss on appraised real estate value of JPY1.0bn as management functions consolidated and relocated, so headquarters land and buildings likely to be idle in the future Entered a capital and business alliance with DIC Markets In the electronic components industry, smartphone demand lost its previous vigor, but there was solid demand for automotive components. Overview FY03/17 sales were JPY47.9bn (-4.0% YoY) and operating profit JPY9.2bn (-15.9%) with the declines primarily due to yen appreciation. The OPM fell from 22.0% to 19.3%. The forex rate rose by JPY11 to JPY109.0/USD from JPY120.1/USD. Factors in YoY growth Factors in YoY sales growth: increased volumes of liquid solder resist for PWBs (+JPY624mn) and increased volumes of dry film for semiconductor packages (+JPY814mn) pushed up sales by a total of +JPY1.4bn. Still, forex and the product mix pulled down sales by JPY3.4bn. Factors in operating profit growth: increased volumes of liquid solder resist for printed wiring boards (+JPY300mn) and increased volumes of dry film for semiconductor packages (+JPY427mn) pushed up operating profit by a total of +JPY727mn. Forex and a less favorable product mix pulled down sales by JPY2.5bn. Sales by product category Sales by product category: high-function rigid JPY20.2bn (flat YoY), general rigid JPY13.0bn (-13.4%), package substrate materials JPY9.7bn (+3.2%), build-up materials JPY1.1bn (+6.3%), FPC materials JPY672mn (+3.2%), and other JPY3.2bn (-10.2%). Use of the company s products High-function rigid materials are used mainly in high-end smartphones, tablets, and automotive (Japanese car manufacturers). General rigid materials are used mainly in PCs and LCD TVs. Package substrate materials are used in semiconductor packages. Build-up materials are mainly used for plugging holes and have not yet penetrated the interlayer insulation market. The company s flexible PWB materials still have a small market share, but applications are increasing amid the trend toward miniaturization. Other sales include some FPD materials sales, which were disclosed separately through FY03/16, and sales from Chugai Kasei (since FY03/16) and Taiyo Green Energy (since FY03/15). 57/71

58 Research Report by Shared Research Inc. Performance by region Sales to external customers Japan JPY9.4bn (-10.6% YoY, 19.7% of sales) China JPY19.9bn (-3.7%, 41.6%) Taiwan JPY6.1bn (-11.7%, 12.7%) South Korea JPY8.5bn (+14.5%, 17.7%) Other JPY4.0bn (-8.4%, 8.3%) Sales including intragroup sales Japan JPY17.9bn (+5.4% YoY, 29.1% of sales) China JPY20.6bn (-5.5%, 33.5%) Taiwan JPY10.0bn (+1.9%, 16.3%) South Korea JPY8.8bn (+14.0%, 14.3%) Other JPY4.1bn (-8.4%, 6.6%) OPM Japan 11.3% China 22.2% Taiwan 14.8% South Korea 14.4% Other 13.1% Capital expenditures, depreciation, and R&D expenses While capital spending for the Kitakyushu Plant has run its course, Taiyo plans to continue spending to strengthen existing businesses and develop new businesses. In FY03/17, capex was JPY1.7bn (-57.5% YoY), and depreciation was JPY2.5bn (+31.4%). R&D expenses were JPY3.2bn (+32.5%), at 6.8% of sales. Note about R&D expenses: Until the company s Kitakyushu Plant (completed in October 2015) begins full-scale operations, its expenses are included in R&D spending, boosting them temporarily in FY03/17. Full-scale shipments are expected by the end of FY03/18, so from FY03/19, these expenses (roughly JPY800mn) will be shifted from R&D to cost of sales. Source: Confirmed by Shared Research through company interviews Extraordinary loss There was impairment loss on real estate appraisal value of JPY1.0bn as management functions consolidated and relocated, so headquarters land and buildings are likely to be idle in the future. Balance sheet Due to the capital and business alliance with DIC, cash and deposits rose by JPY27.4bn YoY to JPY48.8bn, capital by JPY3.0bn to JPY9.2bn, and capital reserves by JPY7.5bn to JPY14.8bn. As a result, total assets rose by JPY26.9bn to JPY92.4bn. 58/71

59 Research Report by Shared Research Inc. Income statement Income statement FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Sales 45,338 32,614 35,056 40,366 39,797 36,184 44,224 48,260 49,843 47,866 52,241 YoY 8.1% -28.1% 7.5% 15.1% -1.4% -9.1% 22.2% 9.1% 3.3% -4.0% 9.1% Cost of sales 29,512 22,635 24,123 28,428 29,822 25,319 28,348 28,865 27,355 26,220 27,304 YoY 8.8% -23.3% 6.6% 17.8% 4.9% -15.1% 12.0% 1.8% -5.2% -4.1% 4.1% Cost ratio 65.1% 69.4% 68.8% 70.4% 74.9% 70.0% 64.1% 59.8% 54.9% 54.8% 52.3% Gross profit 15,826 9,979 10,932 11,938 9,974 10,864 15,875 19,394 22,487 21,645 24,937 YoY 6.7% -36.9% 9.6% 9.2% -16.5% 8.9% 46.1% 22.2% 15.9% -3.7% 15.2% GPM 34.9% 30.6% 31.2% 29.6% 25.1% 30.0% 35.9% 40.2% 45.1% 45.2% 47.7% SG&A expenses 6,930 6,647 6,089 6,557 5,933 6,479 8,307 10,139 11,522 12,424 13,599 YoY 0.9% -4.1% -8.4% 7.7% -9.5% 9.2% 28.2% 22.1% 13.6% 7.8% 9.5% SG&A ratio 15.3% 20.4% 17.4% 16.2% 14.9% 17.9% 18.8% 21.0% 23.1% 26.0% 26.0% Operating profit 8,896 3,332 4,843 5,380 4,040 4,385 7,568 9,254 10,964 9,221 11,337 YoY 11.7% -62.5% 45.3% 11.1% -24.9% 8.5% 72.6% 22.3% 18.5% -15.9% 22.9% OPM 19.6% 10.2% 13.8% 13.3% 10.2% 12.1% 17.1% 19.2% 22.0% 19.3% 21.7% Non-operating income Interest income Dividends received Foreign exchange gains Others Non-operating expenses Interest expenses Commission fee Foreign exchange losses Others Recurring profit 8,586 3,546 4,787 5,316 4,027 4,743 7,827 9,529 11,129 9,202 11,199 YoY 3.9% -58.7% 35.0% 11.1% -24.2% 17.8% 65.0% 21.7% 16.8% -17.3% 21.7% RPM 18.9% 10.9% 13.7% 13.2% 10.1% 13.1% 17.7% 19.7% 22.3% 19.2% 21.4% Extraordinary gains Extraordinary losses 47 1, ,021 3,298 Pre-tax profit 8,571 2,457 4,811 5,208 3,561 4,698 7,593 9,920 11,137 8,756 7,941 Income taxes 2, ,695 1,694 1,005 1,264 2,393 2,947 3,009 2,199 3,016 Income taxes current 2,038 1,400 1,257 1,897 1,002 1,430 1,908 2,670 2,855 2,588 3,040 Income taxes deferred Implied tax rate 25.2% 16.6% 35.2% 32.5% 28.2% 26.9% 31.5% 29.7% 27.0% 25.1% 38.0% Net income 6,410 2,049 3,114 3,514 2,555 3,434 5,199 6,972 8,128 6,557 4,925 Net income attributable to non-controlling interests Net income attributable to owners of parent 6,171 1,958 3,010 3,402 2,502 3,367 4,930 6,667 7,796 6,398 4,856 YoY 11.1% -68.3% 53.7% 13.0% -26.5% 34.6% 46.4% 35.2% 16.9% -17.9% -24.1% Net margin 13.6% 6.0% 8.6% 8.4% 6.3% 9.3% 11.1% 13.8% 15.6% 13.4% 9.3% USD/JPY Per share data (JPY) Shares issued (year end; '000) Treasury shares (year end: '000) -16-1, ,258 Note: Figures may differ from company materials due to differences in rounding methods. Following the slump triggered by the global financial crisis in FY03/09, it took seven years until Taiyo again posted record profits in FY03/16. The company s OPM has been steady at around 20% in the three years from FY03/15 due to a shift in the product mix to high value-added products and cost reductions following the shift to overseas production. Over this timeframe R&D spending increased by roughly 3x, employee numbers by around 50% (note: includes effect of consolidating OTC), and costs to improve the workplace environment increased, driving up SG&A expenses. Sales and operating profit per employee were not diluted and OPM improved. This is a result of R&D and progress in changing employee mindsets. In May 2013, the company purchased its Taiwanese competitor OTC (Onstatic Technology), and in June 2015 it acquired Chugai Kasei, and both were made consolidated subsidiaries. The company and OTC had engaged in fierce price competition, but Taiyo said that selling prices stabilized after the acquisition. It acquired Chugai Kasei to access its R&D capabilities of upstream materials, and to streamline its R&D structure. In January 2017 Taiyo entered a capital and business alliance with DIC, and plans to use the funds from the tie-up for capex, acquisitions, and R&D. 59/71

60 Research Report by Shared Research Inc. Balance sheet Balance sheet FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Assets Cash and cash equivalents 16,440 13,812 14,174 13,972 12,964 14,652 21,150 19,766 21,408 48,800 44,588 Notes and accounts receivable 9,532 6,644 9,173 8,792 8,452 8,199 11,891 13,111 12,836 13,346 15,509 Merchandise and products 4,262 1,356 1,944 1,860 2,154 1,816 2,227 2,348 2,013 2,182 3,499 Work in process Raw materials and supplies 0 1,403 1,646 2,075 1,894 1,674 1,841 1,886 1,593 1,797 2,042 Deferred tax assets Others , ,456 Allowance for doubtful accounts Total current assets 31,057 23,880 27,516 27,675 26,380 26,979 37,798 37,942 39,340 67,401 68,373 Total tangible fixed assets 15,889 14,644 13,954 13,050 12,546 12,664 14,375 16,865 19,644 18,389 17,923 Goodwill ,745 4,849 4,432 4, Sales rights 20,555 Others Total intangible fixed assets ,144 5,327 4,919 4,537 21,818 Investment securities ,058 2,231 Shares and investments in capital of affiliates , Deferred tax assets Net defined retirement benefit asset Others Allowance for doubtful accounts Investments and other assets 1,520 1,876 1,843 1,821 1,417 4,032 1,050 1,106 1,561 2,057 3,374 Total fixed assets 17,863 16,989 16,187 15,175 14,322 17,043 20,570 23,298 26,124 24,984 43,116 Total assets 48,938 40,869 43,704 42,851 40,703 44,023 58,369 61,241 65,464 92, ,490 Liabilities Notes and accounts payable 5,898 3,005 5,482 5,326 4,851 4,486 5,433 5,661 5,765 6,170 7,769 Short-term debt ,274 2,145 Current portion of long-term debt ,116 Accounts payable other and accrued expenses 848 1, , ,633 2,345 1,697 1,210 1,853 Income taxes payable , ,448 Deferred tax liabilities Provision for bonuses Others Total current liabilities 7,959 5,303 7,172 7,681 6,393 6,724 8,936 11,056 10,898 11,355 20,491 Deferred tax liabilities 1, ,069 1,258 1,387 1,458 Long-term debt ,658 7,685 7,413 7,169 15,923 Net defined retirement liabilities Asset retirement obligations Others Total fixed liabilities 1, ,776 8,872 9,315 9,184 17,975 Total liabilities 9,798 6,285 8,018 8,664 7,227 7,213 15,713 19,929 20,214 20,540 38,467 Net assets Capital stock 6,134 6,134 6,134 6,134 6,134 6,134 6,134 6,134 6,188 9,171 9,232 Capital surplus 7,102 7,102 7,102 7,102 7,102 7,102 7,102 7,143 7,304 14,824 14,717 Retained earnings 32,519 27,985 28,661 29,724 29,301 30,379 32,257 36,997 42,490 46,308 47,415 Treasury stock -6,137-4,060-4,060-5,372-5,372-5,372-5,373-14,598-14, Total shareholders' equity 39,618 27,985 37,838 37,589 37,166 38,243 40,120 35,676 41,841 70,125 71,244 Accumulated other comprehensive income -1,215-3,100-2,832-4,098-4,168-2, ,396 1, ,415 Non-controlling interests ,045 2,238 2, Total net assets 39,140 34,584 35,685 34,186 33,476 36,809 42,655 41,312 45,250 71,846 73,023 Total liabilities 48,938 40,869 43,704 42,851 40,703 44,023 58,369 61,241 65,464 92, ,490 Capital expenditures 1,414 1, ,555 3,321 4,055 1,722 22,513 Depreciation 1,529 1,396 1,261 1,127 1,046 1,003 1,181 1,411 1,891 2,485 2,284 Amortization of goodwill ,535 R&D expenses , ,199 1,594 2,213 2,441 3,235 Working capital 7,896 6,585 7,536 7,586 7,848 7,398 10,845 11,975 11,087 11,592 13,686 Total interest-bearing debt ,192 8,754 8,785 8,943 24,184 Net debt -16,440-13,812-14,174-13,972-12,964-14,652-14,958-11,012-12,623-39,857-20,404 Note: Figures may differ from company materials due to differences in rounding methods. 60/71

61 Research Report by Shared Research Inc. Assets Tangible fixed assets declined in the wake of the global financial crisis, but started growing again from FY03/13. Management has been proactive, buying OTC, constructing the Kitakyushu Plant, and establishing Taiyo Green Energy. The company has continued to operate effectively debt-free, and is cash-rich following the financial tie-up with DIC. Liabilities Taiyo has USD-denominated assets, and in these past few years of low interest rates it has accumulated USD-denominated liabilities as a forex hedge. Net assets Net assets have been on an uptrend in line with the company s business performance recovery. At end-fy03/17, following DIC s capital participation, net assets increased by JPY26.6bn YoY to JPY71.8bn. Shareholders equity ratio was 76.9% at end-fy03/17. 61/71

62 Research Report by Shared Research Inc. Statement of cash flows Statement of cash flows FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPYmn) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cash flows from operating activities (1) 9,241 4,581 3,126 4,575 2,793 6,109 7,020 9,232 10,546 9,042 8,100 Cash flows from investng activities (2) -3,390-1, ,343-2,477-3,839-2,913-6,750-1,063-24,161 Free cash flow (1+2) 5,851 3,111 3,056 5,333 1,450 3,632 3,181 6,319 3,796 7,979-16,061 Cash flows from financing activities -1,969-4,428-2,366-3,696-2,978-2,314 2,350-9,919-2,740 20,342 11,319 Depreciation and goodwill amortization (A) 1,557 1,434 1,299 1,153 1,060 1,021 1,349 1,664 2,171 2,726 5,819 Capital expenditures (B) 1, ,436 3,192 3,897 1,645 22,513 Change in working capital (C) -2,209-1, ,447 1, ,094 Simple FCF (NI+A-B-C) 8,776 3,937 2,952 4,051 2,722 4, ,009 6,958 6,974-13,932 Working capital 7,896 6,585 7,536 7,586 7,848 7,398 10,845 11,975 11,087 11,592 13,686 Note: Figures may differ from company materials due to differences in rounding methods. Cash flows from operating activities Cash flows from operating activities move more or less in line with pretax profit and depreciation, but as fluctuations in pretax profit accompany fluctuations in sales, some of the correlation is offset by changes in working capital. Cash flows from investing activities Taiyo has been investing actively in renewing existing facilities, building the Kitakyushu Plant, making acquisitions, and entering new businesses. Investments are expected to remain at high levels as the company uses M&A and other means to become a comprehensive chemical company. Cash flows from financing activities Cash inflows were JPY20.3bn in FY03/17 due to the disposal of treasury stock and share placement to DIC. As the company does not increase interest-bearing debt other than for USD-hedging purposes, net debt is negative (Taiyo has maintained a cash-rich position). As the company works to transform into a comprehensive chemical company, there will be increasing need to consider the balance between capital efficiency, investments, and returns to shareholders. Cash flows FCF and simple FCF (JPYmn) 25,000 Cash flows from operating activities Cash flows from financing activities Cash flows from investng activities (JPYmn) 15,000 Free cash flow Simple FCF 20,000 15,000 10,000 10,000 5,000 5, ,000-10,000-5,000-15,000-10,000-20,000-25,000-15,000-30,000-20,000 Capital expenditures, depreciation, and R&D expenses R&D ratio and OPM (JPYmn) 5,500 5,000 4,500 4,000 3,500 3,000 2,500 2,000 Capital expenditures Depreciation R&D expenses 25.0% 20.0% 15.0% 10.0% 19.6% 10.2% 13.8% 13.3% R&D ratio 12.1% 10.2% 17.1% OPM 19.2% 22.0% 19.3% 21.7% 21.7% 1,500 1, % 6.8% 5.9% 1.9% 3.0% 2.9% 2.5% 2.4% 3.3% 3.6% 4.6% 4.9% 5.0% 0 0.0% Note: Does not include capex and amortization related to the marketing and manufacturing rights of 13 long-listed products (below left graph). 62/71

63 Research Report by Shared Research Inc. March 2018 News and topics On March 23, 2018, the company announced a revision to its dividend forecast and a plan to buy back shares. Revision to dividend forecast The company revised its FY03/18 year-end dividend forecast to JPY95.10 per share, adding JPY30.00 as commemorative dividend (commemorating the 65th anniversary since the company s founding) to the initial JPY65.10 forecast. The revision brings up the annual dividend for FY03/18 to JPY per share, which includes the interim dividend of JPY65.10 per share that has already been paid out. Share repurchase Type of shares to be repurchased: Number of shares to be repurchased: Total repurchase amount: common shares of Taiyo Holdings 375,000 shares (upper limit; 1.30% of total shares issued excluding treasury stock) JPY1.5bn (upper limit) Repurchase period: April 2, 2018 to March 22, 2019 February 2018 On February 2, 2018, the company announced a revision to its full-year forecast, as detailed below: Sales: Operating profit: Recurring profit: JPY51.3bn (versus JPY50.0bn previously) JPY10.8bn (JPY10.2bn) JPY10.7bn (JPY10.1bn) Net income*: JPY7.6bn (JPY7.0bn) EPS: JPY (JPY243.50) *Net income attributable to owners of parent Explaining the revision, the company said demand is running ahead of its initial expectations and the yen is also weaker than expected. The company said that the impact of the execution of the asset transfer (announced on January 5, 2018) under the agreement it had entered into with Chugai Pharmaceutical and F. Hoffmann-La Roche regarding the transfer of marketing and manufacturing rights of 13 long-listed products had not yet been determined and was therefore not reflected in the revisions to its full-year forecast. November 2017 On November 14, 2017, the company announced that it entered into an agreement with Chugai Pharmaceutical Co., Ltd. (TSE1: 4519) and F. Hoffmann-La Roche, Ltd. regarding the transfer of marketing and manufacturing rights of 13 long-listed products. Chugai and Roche will transfer the marketing authorizations including marketing and manufacturing rights of 13 long-listed products manufactured and marketed in Japan by Chugai, to Taiyo Pharma Co., Ltd., a wholly owned subsidiary of Taiyo Holdings. The manufacturing and marketing rights will be transferred to Taiyo Pharma for JPY21.3bn plus the value of inventories. 63/71

64 Research Report by Shared Research Inc. June 2017 On June 22, 2017, the company announced the establishment of a subsidiary, Taiyo Pharma, to develop, manufacture, and sell drugs and quasi-drugs. On June 21, 2017, the company relocated headquarters. New headquarters location: 388 Ohkura, Ranzan-machi, Hiki-gun, Saitama. On June 7, 2017, the company unveiled a new three-year management plan starting in FY03/18, entitled Next Stage February 2017 On February 10, 2017, the company announced the completion of procedures for payment regarding new share issue by a third-party allotment and disposal of treasury stock. January 2017 On January 25, 2017, the company announced upward revision to forecast for year-end dividend per share. On the same day, the company announced business and capital alliance with DIC, new share issue by third party allotment, and disposal of treasury stock. 64/71

65 Research Report by Shared Research Inc. Other information History 1953 September Taiyo Ink Mfg. Co., Ltd. established 1970 August Starts sales of printed wiring board (PWB) materials 1973 May Develops and sells epoxy resin thermal curable one-component solder resist 1976 Major change in strategy to position solder resist as the core business driver 1982 March Establishes Ranzan Plant (current Ranzan Facility) 1984 June Announced liquid photoimageable SR at a JPCA tradeshow 1988 September Establishes Taiyo Ink Mfg. Co., (Korea) Ltd., a joint-venture in South Korea Starts overseas production 1990 March Constructs Technology Development Center at the Ranzan Facility September December Listed as an over-the-counter (OTC) stock Establishes a sales subsidiary Taiyo America, Inc. in Nevada, US 1992 February Starts research and development of PDP materials March January November Relocates the head office to a new building in Nerima, Tokyo Develops and sells solder resist for package substrates (in particular, SR for BGA) Basic patent for alkaline photoimageable solder resist registered in Japan 1994 December Obtains ISO 9001 certification for the head office and the Ranzan Facility 1995 February Makes Taiyo America, Inc. a manufacturing and sales subsidiary, and starts production 1996 September Establishes a production subsidiary Taiwan Taiyo Ink Co., Ltd January Establishes sales subsidiaries Taiyo Ink International (Singapore) Pte. Ltd. and Taiyo Ink International (HK) Ltd January Obtains certification of QS 9000 for the head office and Ranzan Facility, and ISO for Ranzan Facility 2001 January Listed on the First Section of Tokyo Stock Exchange April July December Opens Ranzan-Kitayama Facility as the main domestic production base Establishes a technology support subsidiary Taiyo Ink (Thailand) Co., Ltd. Establishes a production subsidiary Taiyo Ink (Suzhou) Co., Ltd. in China 2003 January Obtains ISO certification for the head office and Ranzan Facility September Observes the 50th anniversary 2005 Expand sales of PDP materials 2010 September Establishes sales subsidiary Taiyo Ink Trading (Shenzhen) Co., Ltd. October Implements a company split and changes the trading name to Taiyo Holdings Co., Ltd May Acquires shares of Onstatic Technology Co., Ltd. in Taiwan and makes it a subsidiary 2014 December Establishes solar power generation subsidiary Taiyo Green Energy Co., Ltd April Establishes a Taiyo Ink Products Co., Ltd., a sales subsidiary of Taiyo Ink Mfg. Co., Ltd. June October Obtains shares of Chugai Kasei Co., Ltd. through a stock swap and makes it a subsidiary Opens Kitakyushu Facility in Kitakyushu, Fukuoka, as the second production base for Taiyo Ink Mfg. Co., Ltd January Enters a capital and business alliance with DIC Corporation August Establishes pharmaceuticals development and sales subsidiary Taiyo Pharma Co., Ltd. Enters an agreement for the transfer of manufacturing and marketing rights of 13 long-listed products from Chugai November to Taiyo Pharma 65/71

66 Research Report by Shared Research Inc. Major shareholders Major shareholders DIC Corporation 5, % KOWA Co., Ltd. 5, % Japan Trustee Services Bank, Ltd. (Trust account) 1, % Japan Trustee Services Bank, Ltd. (Sumitomo Mitsui Trust Bank Retirement Benefit Trust Account re-entrusted by Sumitomo Mitsui Trust Bank) 1, % Misaki Engagement Master Fund % The Master Trust Bank of Japan, Ltd. (Trust account) % Shikoku Chemicals Corporation % Toshin Yushi Co., Ltd % Mitsuo Kawahara % Takato Kawahara % Total 17, % Treasury shares % Total shares issued 28, % as of September 30, 2017 Note: Figures may differ from company materials due to differences in rounding methods. Shareholders by investor type Financial instruments business operators 1% Shares Shareholding held ('000) ratio Foreign companies 16% Financial institutions 21% Other companies 44% Individuals, other 18% as of September 30, 2017 Dividend policy Dividends FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 FY03/18 (JPY) Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. Cons. DPS Payout ratio 49.3% 121.2% 77.5% 87.3% 91.5% 68.0% 61.9% 34.1% 32.5% 45.1% 95.0% DOE 8.1% 6.5% 6.8% 8.6% 6.9% 6.6% 7.9% 5.5% 6.2% 5.5% 6.4% Note: Figures may differ from company materials due to differences in rounding methods. The company s medium-term management plan targets a DOE of at least 5%. This is because Taiyo aims to pay a stable dividend not subject to fluctuations in earnings. Taiyo does not have a particular payout ratio policy, but rather focuses on the DOE. 66/71

67 Research Report by Shared Research Inc. Top management President and Representative Director, CEO, Eiji Sato Born May 3, 1969 April 1992 July 1995 October 1999 May 2001 June 2008 October 2009 April 2010 March 2011 April 2011 April 2014 Joins Tohmatsu (a DRT International company, now Deloitte Touche Tohmatsu LLC) Opens Eiji Sato Certified Public Accountant Office Establishes es Networks Co., Ltd., and becomes President and Representative Director Becomes the auditor for Taiwan Taiyo Ink Co., Ltd. Director, Taiyo Holdings Co., Ltd. Executive Officer and Group CFO of Taiyo Holdings Co., Ltd. Vice President and Representative Director, Taiyo Holdings Co., Ltd Director, es Holdings Co., Ltd. (now es Networks Co., Ltd.; current position) President and Representative Director, Taiyo Holdings Co., Ltd. (present position) and Group CEO (current position) President and Representative Director, Taiyo Ink Co., Ltd. (current position) Co-author of "Corporate Management by CFO" (with Shintaro Suhara), 2010 (published in Japanese) CEO Sato argues (in a book he co-authored called Corporate Management by CFO) that a CFO s financial perspective is crucial to cope with complexities dealing with all stakeholders. He states that companies should be managed by a unified CEO, COO, and CFO. The roles are clearly delineated as the CEO looks at finances from a business perspective, whereas the CFO looks at the business from a financial perspective. Sato also states that unlike a traditional finance manager or accounting manager, a CFO must maintain a longer-term outlook of the company s finances while also looking at the business. Shuichi Omi, who holds CPA qualifications in Japan and Vietnam, acts as a kind of CFO in his capacity as executive officer and general manager, administration division. Employees Per employee data FY03/08 FY03/09 FY03/10 FY03/11 FY03/12 FY03/13 FY03/14 FY03/15 FY03/16 FY03/17 Number of employees ,148 1,122 1,202 1,249 Avg. temporary employees (not included in above) Japan China Taiwan Korea Others Company-wide Sales per employee (JPYmn) Operating profit per employee (JPYmn) Source: Shared Research based on company materials. Note: Employees noted as company-wide (shared) are those who work for the holding company (the company). Onstatic Technology (OTC) was consolidated in FY03/14. Employee numbers have been growing consistently since FY03/08, even in the wake of the global financial crisis. The company boosted its workforce chiefly in Asia accompanying the shift to overseas production and increase in overseas sales offices. Taiyo said it hires personnel of various nationalities at the head office in Japan, and there were 85 non-japanese employees at headquarters as of March 31, 2017, accounting for over 8% of head office employees. 67/71

68 Research Report by Shared Research Inc. Corporate philosophy and CSR initiatives Speed and communication CEO Sato prioritizes speed and communication. The market changes extremely quickly so swift decision-making is key, only made possible by delegating authority to subsidiaries. On the other hand, too much delegation puts group cohesiveness at risk. To prevent this, Taiyo emphasizes global communication, and was developing employees who can thrive in a global setting and recruiting non-japanese employees to work at the head office (85 non-japanese employees or over 8% as of March 31, 2017). Developing proactive human resources CEO Sato says the company is working to develop proactive employees. The company s history has embodied the principle that building things requires developing people, and Taiyo sees employees as its true growth driver. At the company s Suzhou China subsidiary, only a few of its 250 employees leave every year, and there is almost zero turnover at the Taiwan subsidiary. This high retention rate is a reflection of the company s human resources management. Corporate social responsibility and quality control Because Taiyo is in the chemical industry, it pays special attention to protecting the environment for residents near its factories. The company is working to achieve a balance between the wealth generated by chemical substances and the impact on the global environment and human health by creating products that are high-function and do not put a heavy burden on the environment. Taiyo employs management systems based on ISO 9001:2008 and conducts quality assurance, quality control, and quality improvement activities. Corporate philosophy: Realize a pleasant society by further advancing every technology the Group has and creating a wide range of products to help fulfill the dreams for the whole world with our innovative products. CSR philosophy: We will discharge our corporate social responsibility with regard to the achievement of our management philosophy, including complying with the law, protecting the environment, ensuring thorough quality management, and contributing to society. Source: Company materials Corporate philosophy, CSR philosophy, and Code of Conduct Share price, environmental protection, high-function products Source: Company materials. Refer to the company s annual report for further details on CSR initiatives: 68/71