The Professional Tools. Manual assembly laboratory for SMD. Basic version with EASYPLACER manipulator. Reference: Z13070

Transcription

1 Circuit imprimé Français 240 rue Hélène Boucher BUC - FRANCE - Tél. : 33 (0) Fax. : 33 (0) cif@cif.fr Web : Manual assembly laboratory for SMD Basic version with EASYPLACER manipulator Reference: Z3070 All the news and CIF products on The Professional Tools Ed /

2 40902 TABLE OF CONTENT ALLOY DEPOSIT ASSEMBLY VISUAL ASSISTANCE REFLOW OVEN VISUAL CONTROL REWORK STATIONS PROTECTION AND FILTRATION PRODUCTS SERVICES GENERAL SALES CONDITIONS Ed /

3 40902 ALLOY DEPOSIT Ref. Description QTY DX-250C Digital dispenser DX-250C The DX-250 Series is a high performance Digital Dispenser. Complete with a range of accessories, the micro-air dispensing system unites affordability with high accuracy and repeatability for exceptional results. These user friendly fluid dispensing systems include a digital timer with a rotary control time knob for easy setup and a vacuum suck-back control for all viscosities of fluids. Key Features & Benefits Small footprint and lightweight Economical dispenser Highly accurate and repeatable micro-air dispensing Digital timer and vacuum controls Available in two versions of operating pressure: 0 to 00 psi for general applications, and 0 to 5 psi for specific low viscosity applications Packaged ready to use with a universal power supply, foot switch, air hose, sample tips, syringe barrels and adapter. I/O Interface for robotic applications Technical characteristics : DX-250 SH-300 Cycle Timing range Timing tolerances Input voltage Input frequency Cycle mode Size weight Rate 600 cycle/min to s +/- 0.00% VAC 50-60Hz Timed, purge 52 x 65 x 78 mm.2 kg SH-300 Syringe holder for DX-250C F4045 Very silent laboratory compressor, CS 25 Sound level 30 db Delivered with quick connecting kits, 3 m of tube and filter to clean air to connect to our equipment Technical characteristics Capacity Production Maximum pressure Power Net weight Power supply Liter 7 L/min 6 bars 35 W 2 Kg 230 V - 50 Hz Ed /

4 40902 ASSEMBLY Ref. Description QTY V90020 Manual SMD manipulator EASYPLACER The pick and place station EASYPLACER is a new manual system for the placement of SMT-components. Compact and ergonomic station. Working area 380 x 295 mm Delivered ready to use To approach the SMD technology without any problem Ergonomic arm Compact station with a working area of 380 x 295 mm The arm support assures a comfortable position for the operator Head with 360 rotation of pipette Vacuum pump integrated in the assembly unit EASYPLACER is delivered complete with : a set of 2 different needles, a set 2 of different Ø of rubber discs for the prehension of big components and 3 PCB holders. Possibility to add (optional) tape or stick feeders, consult us VISUAL ASSISTANCE H502.L Magnifying lamp ARES.L Of low enlargement, the lamp is intended for the visual assistance. Thanks to its glass square lens of 85 x 55 mm, the lamp offers a wide field of vision and its magnification is adapted to the requirements for precision work. It is particularly recommended for the assistance to the placement of SMT, during the long-term works. It offers a better visual comfort. The lighting high luminosity includes 08 LEDs with white light (daylight). Lens size 85 x 55 mm Light source 08 LEDs Arm length 000 mm Solar protection cover included Ed /

5 40902 REFLOW OVEN Ref. Description QTY F34 REFLOW OVEN - FT 02 FT02 oven has been conceived to the reflow of solder paste or polymerization of the glues for prototyping. FT02 oven is compatible with high temperature alloys and above all "lead free" ones thanks to its new heating system as well as its electronics. It includes in line many functions as 0 programmes memorisation, information display upon LCD monitor, a wide viewing window to supervise the process. For a better safety, FT02 includes a double window with air circulation to avoid any burning risk as well as a blocking door opening to avoid any unwanted opening. Complete view of the card thanks to a large window Possibility to keep in memory 0 programs Compact model, but working area of 90 x 290 mm Heating through forced convection Temperature control by microprocessor Digital display of different advises: temperature and time Easy programming for immediate control Safety: double window with air circulation, closing door access Technical characteristics Working area Heating Quartz elements Temperature control Working temperature Thermic stabilisation time External dimensions L x w x H Total Power Net weight Power supply 90 x 290 mm 2 levels 2 x KW by microprocessor up to 300 C about 3 minutes 370 x 455 x 320 mm 2,2 KW 7,5 Kg 230V 50/60 Hz Ed /

6 40902 REWORK STATIONS FOR TRADITIONAL AND SMT COMPONENTS Ref. Description QTY PS-900 Solder Unit PS-900 Thermo regulated solder unit with a light and ergonomic soldering iron. One of the strong points is its cartridge tips. The tip and the heating element are made of a single piece. It is fast and comfortable to change the tip. Moreover, the cartridge tips may be stored in a small box fixed on the side of the unit. Control of the temperature with Smartheat Technical characteristics Power supply Power Ceramic heating element Temperature Idle Temperature repeatability Tip-to-ground potential Unit net weight Dimensions L x w x H 230 V 50/60 Hz 60 W 24V AC/70W 200 to 400 C 0, C < 2mV 3 Kg 05 x 75 x 90 mm MFR-350 Desoldering unit MFR-350 This desoldering unit is delivered with a very light and ergonomic soldering gun. Totally ESD safe. The pump is included. The unit is delivered with a iron and its cleaning kit. For each tool, many accessories are available: - Nozzles for soldering iron - Desoldering nozzles for gun - Nozzles for hot air iron Technical characteristics Desoldering temperature Output tension Desoldering gun power Power Dimensions L x w x H Power supply 50 C to 380 C 24 V AC 60 W 0 W 70 X 200 X 52,5 mm 230 V 50/60 Hz MFR-UK4 Kit including tweezers and workstand To solder and desolder by contact of SMT components as SO. Very simple and very quick using process, heating is made through contact. No risk to deteriorate the components which are near. Ergonomic plier. Different sizes of tweezers cartridges are available, upon request Ed /

7 40902 REWORK STATIONS FOR TRADITIONAL AND SMT COMPONENTS (to follow) Ref. Designation QTE HCT Hot air rework unit HCT-900 To solder and unsolder SOIC, TSOP, BQFP, SOP, QFP and PLCC. Totally ESD safe. Autonomous model, built-in pump. Accurate adjustment of the air volume and temperature Automatic cooling mode. Temperature adjustment from 00 C to 500 C. Supplied with a standard single jet 5 mm nozzle Technical characteristics Control Temperature Air flow Power Unit net weight Dimensions L x w x H Electrical supply 00 to 500 C 6 to 25 l/min 320 W 4,7 Kg 20 x 70 x 40 mm 230 V 50/60 Hz A large range of nozzles are available, see or website or consult us PROTECTION AND FILTRATION I43200 Basic table antistatic kit including: antistatic green carpet for table 200 x 800 x 2 mm anallergic conductive adjustable bracelet extensible pressure link 0 mm / pressure 0 mm table/ground link 2 I50. Centrale de filtration FILTRATEC Kit A : The unit, including a special filter with high a absorption degree, is directly connected to the etching machine. The acid vapours are first filtered and then chemically neutralised thanks to the filter with an efficiency of more than 99 %. The unit is delivered complete with its connecting kit to the machine and a filter. Inline filter HEPA + Neutrafil, 2 speeds, a very strong and silent turbine (52 dba). As an option possibility of remote control. Dedicated for solder fumes, acid vapours and solvants. Power: 40 W. Suction capacity: 05 m3/h Microfilter efficiency HEPA >99.98% Gas filter efficiency > 95% Dimensions: 307 x 307 x 40 mm Net weight: 0 Kg Ed /

8 40902 VISUAL CONTROL Ref. Description QTY H5022.L Magnifying lamp ROLLER.L The lighting high luminosity includes 08 LEDs with white light (daylight). Of low enlargement, the lamp is intended for the visual assistance. Thanks to its glass round lens of Ø 78 mm, the lamp offers a wide field of vision and its magnification is adapted to the requirements for precision work. It is particularly recommended for the assistance to the placement of SMT, during the long-term works. It offers a better visual comfort. Lens size Ø 78 mm Light source 08 LEDs Arm length 000 mm Solar protection cover included PRODUCTS F4230 Lead free Starter kit for SMT Stored in a PVC suitcase and containing: x syringe 0 cc of lead free solder paste with no-clean flux x spray can of 400 ml flux cleaner x syringe 0 cc with flux gel x bag of 50 polyethylene needles ø 0,40 mm x bag of 0 SMD boxes with lid x SMT tweezers x roll of 0,50 kg lead free solder wire ø 0,5 mm x solder tip cleaner x tip / nozzle repair set. x bag of 25 hot temperature resistant papers Ed /

9 40902 SERVICES Y LIV Installation of the equipment ½ day Delivery, freight charge not included Information prices: - Price EX-WORKS, BUC France - Origin of goods: France / EEC - Installation: on demand - Training: on demand - Validity of offer: month - Delivery time: to confirm at reception of your order - Warranty: year parts and labour, travel costs not included - Payment: 00% before shipment Ed /

10 40902 GENERAL SALES CONDITIONS Page /2. APPLICABILITY OF CONDITIONS.. The hereunder conditions constitute the whole contract between the parties save where varied in writing and signed by the director of the company. The buyer acknowledges that he has no entered into the contract as the result of any other representation made by or on behalf of the company whether or in writing. 2. QUOTATIONS & DRAWINGS 2.. All estimates and quotations remain valid for thirty days unless otherwise stated at the time of the quotation. Quotations do not constitute any offer by the company and no order shall result in a binding contract until accepted by the company The acceptance of the company s quotation must be accompanied by sufficient information to enable the company to proceed forthwith (including without limitation Buyer s drawings if appropriate) and as appropriate information concerning any specific testing of the goods which may be required by the buyer. Otherwise the company shall be at liberty to amend the prices quoted to cover any increase in cost which has taken place after acceptance Unless otherwise specified in the company s quotation, all specifications, drawings, photographs, diagrams and particulars of weight and dimensions submitted with the quotation are approximate only. 3. DELIVERY 3.. Save as otherwise expressly agreed in writing delivery shall be to the destination specified in the buyer s order or such other place as the parties may agree The company reserves the right to deliver goods by instalments and in such event each instalment shall be treated as a separate contract provided the deliveries of further instalments may be withheld until the goods comprised in earlier instalments have been paid for in full Any periods of time quoted or accepted by the company for dispatch delivery or completion of the order are to commence from dispatch of the company s acceptance of the buyer s order and receipt of all necessary information and drawings to enable the company to commence the work. Any such periods are to be treated as estimates only, not involving the company in any liability to the buyer in respect of loss suffered as a result of failure to dispatch, deliver or complete within such a period of time, and no delay shall entitle the buyer to cancel the order or refuse to accept delivery at any time The company shall not be liable to the buyer for any delay or failure to meet its obligation under the contract as a direct result of any force majeure including but not limited to strike, war or act of war, insurrection, riot or civil commotion, act of public enemy, fire, flood or other case caused beyond the control of the company. 4. CLAIMS 4.. Notice of any claim relating to shortage or damage to the goods shall be made to the company and the carrier of the goods in writing within 8 days of receipt of the goods or such time period as may be required by the carrier s conditions is less Notice of any claim related to loss or non-delivery of goods shall be made to the company and the carrier of the goods in writing within 7 days in receiving the advice note in respect thereof or such other time period as may be required by the carrier s conditions is less The company will consider claims only if the above conditions are met and the claim is signed by the customer and accompanied by full particulars giving the invoice and buyer s order number, and as the case may be, the case number, the condition of the case or packing and the copy of the delivery not in respect of the goods The company s liability hereunder in respect of any shortage loss or damage to the goods shall be limited to the proportion of the price attributable to the goods undelivered lost or damaged. 5. SALES CONDITIONS 5.. Unless otherwise stated, the prices in any quotations by the company is based on the current cost of material, labour, duties, taxes, exchange rates, and of conforming to statutory obligations ruling ate the date of such quotation is subject to adjustment Prices contained in a quotation are subject to revision if the buyer shall have omitted to give instructions in sufficient details, or his requirements are for quantity or delivery schedules or other terms different from those against which the prices are quoted, including without limitation changes in local or national site working practices Minimum amount of the order is , otherwise administrative fee of 8.00 will be invoiced For first order, payment must be before the delivery. For following orders and unless otherwise agreed in writing, payment shall be due in full thirty days from the date of delivery note or invoice issue Where only parts of the goods are dispatched, payment shall be made of the contract price attributable to that part In the event of any delay or delays in manufacture, dispatch or delivery which are attributable to the buyer s actions or failure to act, the buyer shall at the discretion of the company either make payment to the company in accordance with the above as if the goods have been delivered at the time at which but for such delay or delays would have taken place or make a partial payment to the company in accordance with the above based upon the proportion of the order completed at the date of and due from the date of which delay was notified. 6. LATE PAYMENT 6.. The company reserves the right to charge interest on late payment of 2% per annum above the base rate quoted by European bank from time to time on the daily balance from the due date until payment is made If any payment falls into arrears the company shall have the right to cancel or postpone performance of any contract with the buyer wholly or in part and to be paid immediately for performance of such contract to date. Ed /

11 40902 GENERAL SALES CONDITIONS Page 2/2 7. RISK AND TITLE 7.. Risk passes to the buyer on delivery of the goods Whilst risk in goods supplied to the buyer under the contract shall pass on delivery, legal and beneficial ownership of the goods shall remain with the company until such time as the company has received payment in full for all goods supplied to the buyer or until such time as the goods are sold to the buyer s customers by way of bona fide sale at full market (whichever shall be the earlier) and until such time the buyer shall keep such goods separate from its property and clearly identified as the property of the company Notwithstanding terms of payment specified herein or elsewhere payment for all goods supplied to the buyer shall become due immediately upon the commencement of any act or proceeding in which the buyer s solvency is involved or upon the appointment of a receiver over the whole of any part of the buyer s assets or undertaking and upon such occurrence the power of sale granted to the buyer shall automatically determine If payment for any goods is overdue whether in whole or in part and any goods have been delivered to the buyer, the company may without prejudice to any of its other rights enter upon the buyer s premises to recover the goods and/or resell the goods or such of them as the company in its absolute discretion may designate 7.5. Until the company is paid in full for all goods supplied, the buyer is and shall remain a fiduciary for the company in respect of the goods and if the buyer sells or allows to be sold the goods, the proceeds of sales shall be held in a separate clearly identifiable and the beneficial interest shall attach to the proceeds of sale and the company shall have the right to trace such proceeds of sale If any of the goods are incorporated or used in other products before full payment for all goods supplied under the contract has been made, title in such product shall be and remain with the company until full payment has been made or such products have been sold and all of the above provisions of this clause shall extend to such products. 8. INDUSTRIAL PROPERTY RIGHTS 8.. The buyer shall indemnify the company in respect of, any infringement which is due to the company having followed a design or instruction furnished or given by the buyer, or the use of such goods in a manner or for a purpose or in a foreign country not specified by or disclosed to the company, or any infringement which is due of such goods in association or combination with any other goods not supplied by the company AND PROVIDED ALSO that this indemnity is conditional on the buyer giving to the company the earliest possible notice in writing of any claim being made or action threatened or brought against the buyer and on the buyer permitting the company at its own exclusive conduct of any litigation that may ensue and all negotiations for a settlement of claim. The buyer on its parts warrants that any design or instruction furnished or given by it shall not be such as will cause the company to infringe any Letter Patent, Registered Design, Trade or Service Mark, copyright or any other industrial property right of whatsoever nature owners or enjoyed by any third in the execution of the contract Any design and/or tooling charges charged to the customer does not constitute the transfer of ownership which at all times remains with C.I.F., unless agreed in writing between the parties concerned. ANY CONDITIONS on the customer in contrary to the above are not accepted. 9. CANCELLATION 9.. The buyer may not vary or cancel the contract or any part thereof without the written consent of the company which, if given, shall be deemed to be on the express condition that the buyer shall indemnify the company against all loss, damage claims actions and loss of profit arising out of such cancellation unless otherwise agreed in writing The company may at its option cancel/suspend all further deliveries under the contract in the event of default by the buyer in making any payments due hereunder or and any other contract between the buyer and the company or shall die or become bankrupt or enter into liquidation or have a receiver appointed to all or any part of its undertaking or assets or shall offer to or enter into arrangement with his or its creditors or any of them or fail to comply with any statutory demand or do or suffer any similar act which evidences insolvency. 0. LAW 0.. The contract shall be deemed to be a contract made in FRANCE and shall be construed according to the law of FRANCE. Any dispute shall be referred to the Tribunal of Commerce of Yvelines in Versailles (F-78). Ed /