The Professional Tools. Manual assembly laboratory for SMD. Professional version with PRECITEC manipulator. Reference: Z13080

Transcription

1 Circuit imprimé Français 240 rue Hélène Boucher BUC - FRANCE - Tél. : 33 (0) Fax. : 33 (0) cif@cif.fr Web : C.I.F Manual assembly laboratory for SMD Professional version with PRECITEC manipulator Reference: Z3080 All the news and CIF products on The Professional Tools Printed on /0

2 C.I.F TABLE OF CONTENT ALLOY DEPOSIT ASSEMBLY VISUAL ASSISTANCE REFLOW OVEN VISUAL CONTROL REWORK STATIONS FOR COMPONENTS PROTECTION AND FILTRATION PRODUCTS SERVICES GENERAL SALES CONDITIONS Printed on /0

3 C.I.F ALLOY DEPOSIT Ref. Description QTY V90007 MANUAL OPERATED STENCIL PRINTER FOR SMD TECPRINT 700 TECPRINT 700 is a new manual operated stencil printer. Fixing a stencil is fast and easy with our auto-tensioner system. The stencil printer can be used for one as well as two sided PCB s, even if there are already components on one side (height available 25 mm) Compatible with double reflow process (Height available : 25 mm) Very easy to place the stencil. No extra frame, auto-tensioner system Immediate adjustment in X, Y and thêta of the stencil ± 7,0 mm Delivered with a lot of accessories Technical specifications Max stencil 30 x 470 mm Mini stencil 50 x 50 mm Max circuit 300 x 400 mm Mini circuit 30 x 50 mm ASSEMBLY F30. Ergonomic manual placement station PRÉCITEC - The originality of the unit is the prehension head moving only on Z axe. - The moving X and Y is ensured with arm moving. - Compact with a big working area: 350 x 400 mm - Can be used by right-handed and left-handed without modifications - Double support for arm for a best working position to guarantee a perfect comfort to the user. - Sensitive prehension head with components rotation upon Built-in vacuum pump in the arm - Light into the working area on the prehension head. The card is maintained by bars at magnetic base. - Delivered complete with set of accessories: 8 opening boxes (3 x 6 different sizes), set of needles, set of suction cups, 3 bars to support cards. Support table (option) which can receive all kinds of complementary accessories as dispensers or repair units. Technicl specificcations PCB working area 350 x 400 mm Placement accuracy 0402 to QFP with 0,65 mm accuracy Rate until 900 components/ hour Sound level < 70 db(a) Available options: - Color camera Helios II, Ref H Color camera Helios II with color monitor, Ref H Z axis blocking, Ref V90000 Registered model VISUAL ASSISTANCE Printed on /0

4 C.I.F Ref. Description QTY H502.L Magnifying lamp ARES.l Of low enlargement, the lamp is intended for the visual assistance. Thanks to its glass square lens of 85 x 55 mm, the lamp offers a wide field of vision and its magnification is adapted to the requirements for precision work. It is particularly recommended for the assistance to the placement of SMT, during the long-term works. It offers a better visual comfort. The lighting high luminosity includes 08 LEDs with white light (daylight). Lens size 85 x 55 mm Light source 08 LEDs Arm length 000 mm Solar protection cover included Specifications: Electrical supply: 230V - 50/60 Hz Consumption: 8,5 Watts Solar protection cover: yes Quick installation on any plane surface thanks to vise-grips (6,3cm) Net weight: 5.25 Kg REFLOW OVEN F32 Batch Reflow Oven for prototypes - FT 05 forced convection system Reflow oven FT05 is a professional oven of new generation. It is manufactured to work with lead free alloys Complete view of the card through a big window Compact model but offering a reflow working area of 350 x 400 mm Display on LCD screen of the different consigns In-line memorisation of 0 programmes High temperature alloys compatible (lead free) Heat distribution through forced convection. Temperature control by microprocessor. SMTix-FT software included Very simple parameters for a perfect use Safety: double glazing with air circulation, extraction pipe for solder fumes, solder fumes filter unit as an option. 350 x 400 mm 2 levels 4 x KW Printed on /0

5 C.I.F Technical characteristics Working area Heating Quartz elements Memorisation of programmes Temperature control Working temperature Thermic stabilisation time External dimensions L x w x H Total Power Net weight Power supply 0 (in line) by microprocessor up to 300 C about 5 minutes 670 x 600 x 375 mm 4,3 KW 34,5 Kg 230V 50Hz F42302 SMTix-FT software for FT05 oven Software included with FT05 oven Connected to a oven by a simple link RS232, SMTix-FT automatically detects the probed connected to the oven. "Test" Mode: this software can parameter the oven to test profiles on the card, the viewing curve, test agreement and storage into of the 0 memories of the oven or of the PC. You can print the tests and add comments. "Production" Mode: oven piloting further to files agreed tests. View of the oven probe and curve. SMTix software also indicates the problems: broken lamps, dirty oven,... The SMTix software also detects the problems: broken lamps, dirty oven, I5025.F Solder fumes filter unit FILTRATEC F The unit, including a special filter with high a absorption degree, is directly connected to the etching machine. The acid vapours are first filtered and then chemically neutralised thanks to the filter with an efficiency of more than 99 %. The unit is delivered complete with its connecting kit to the machine and a filter. In-line filter HEPA + Neutrafil, 2 speeds, a very strong and silent turbine (52 dba). As an option possibility of remote control. Dedicated for solder fumes, acid vapours and solvants. Power: 40 W. Turbine capacity : 255 M3/h Microfilter efficiency HEPA >99.98% Gas filter efficiency > 95% Dimensions: 307 x 307 x 40 mm Net weight: 0 Kg Printed on /0

6 C.I.F REWORK STATIONS FOR TRADITIONAL AND SMD COMPONENTS Ref. Description QTY MFR-35 Soldering and desoldering unit MFR-35 The MFR-35 features a soldering hand-piece and a desoldering gun. The power supply has an internal pump providing 0.7 bar of vacuum suction force combined with Smartheat technology that makes soldering, rework and through-hole desoldering easy and safe. Features and Benefits: Self-contained powerful pump 2 in ergonomic and flexible hand-piece: pencil or pistol Collection chamber with larger capacity Smart collection chamber for quick and easy change Dual switchable output Powered by Smartheat Technology MFR-UK4 Products included with MFR-35: Switched Dual Output Power Supply with Internal Pump Desolder Hand-piece, with selectable grip, and cord New Style Solder Cartridge Hand-piece, with cord Universal Workstand for Desolder Hand-piece Universal Workstand for Solder Hand-piece Note: No tip/cartridge included Kit hand piece and workstand including: To solder and desolder by contact of SMT components as SO. Very simple and very quick using process, heating is made through contact. No risk to deteriorate the components which are near. Ergonomic plier. Different tweezer cartridges sizes available, upon request HCT Hot air rework unit HCT-900 To solder and unsolder SOIC, TSOP, BQFP, SOP, QFP and PLCC. Totally ESD safe. Autonomous model, built-in pump. Accurate adjustment of the air volume and temperature Automatic cooling mode. Temperature adjustment from 00 C to 500 C. Supplied with a standard single jet 5 mm nozzle Technical characteristics Control Temperature Air flow Power Unit net weight Dimensions L x w x H Electrical supply 00 to 500 C 6 to 25 l/min 320 W 4,7 Kg 20 x 70 x 40 mm 230 V 50/60 Hz A large range of nozzles are available, see our website or consult us Printed on /0

7 C.I.F PROTECTION AND FILTRATION Ref. Description QTY I43200 Basic table antistatic kit including: 2 antistatic green carpet for table 200 x 800 x 2 mm anallergic conductive adjustable bracelet extensible pressure link 0 mm / pressure 0 mm table/ground link I50. Autonomous filtration unit new range FILTRATEC Kit A : The unit, including a special filter with high a absorption degree, is directly connected to the etching machine. The acid vapours are first filtered and then chemically neutralised thanks to the filter with an efficiency of more than 99 %. The unit is delivered complete with its connecting kit to the machine and a filter. Inline filter HEPA + Neutrafil, 2 speeds, a very strong and silent turbine (52 dba). As an option possibility of remote control. Dedicated for solder fumes, acid vapours and solvants. Power: 40 W. Suction capacity: 05 m3/h Microfilter efficiency HEPA >99.98% Gas filter efficiency > 95% Dimensions: 307 x 307 x 40 mm Net weight: 0 Kg VISUAL CONTROL H400 Stereomicroscope SM00 Necessary tool to control pieces. Its highly adjustable and movable feet permits working on table of big dimensions. Working distance feet /objective 300 mm. Occular head at 45. Fix enlargement x 20 Light in case of problem. F4230 PRODUCTS Lead free Starter kit for SMT Stored in a PVC suitcase and containing: x syringe 0 cc of lead free solder paste with no-clean flux x spray can of 400 ml flux cleaner x syringe 0 cc with flux gel x bag of 50 polyethylene needles ø 0,40 mm x bag of 0 SMD boxes with lid x SMT tweezers x roll of 0,50 kg lead free solder wire ø 0,5 mm x solder tip cleaner x bag of 25 hot temperature resistant papers SERVICES Printed on /0

8 C.I.F SERVICES Y LIV Installation of the equipment ½ day Delivery, freight charge not included Information prices: - Price EX-WORKS, BUC France - Origin of goods: France / EEC - Installation: on demand - Training: on demand - Validity of offer: month - Delivery time: to confirm at reception of your order - Warranty: year parts and labour, travel costs not included - Payment: 00% before shipment Printed on /0

9 C.I.F GENERAL SALES CONDITIONS Page /2. APPLICABILITY OF CONDITIONS.. The hereunder conditions constitute the whole contract between the parties save where varied in writing and signed by the director of the company. The buyer acknowledges that he has no entered into the contract as the result of any other representation made by or on behalf of the company whether or in writing. 2. QUOTATIONS & DRAWINGS 2.. All estimates and quotations remain valid for thirty days unless otherwise stated at the time of the quotation. Quotations do not constitute any offer by the company and no order shall result in a binding contract until accepted by the company The acceptance of the company s quotation must be accompanied by sufficient information to enable the company to proceed forthwith (including without limitation Buyer s drawings if appropriate) and as appropriate information concerning any specific testing of the goods which may be required by the buyer. Otherwise the company shall be at liberty to amend the prices quoted to cover any increase in cost which has taken place after acceptance Unless otherwise specified in the company s quotation, all specifications, drawings, photographs, diagrams and particulars of weight and dimensions submitted with the quotation are approximate only. 3. DELIVERY 3.. Save as otherwise expressly agreed in writing delivery shall be to the destination specified in the buyer s order or such other place as the parties may agree The company reserves the right to deliver goods by instalments and in such event each instalment shall be treated as a separate contract provided the deliveries of further instalments may be withheld until the goods comprised in earlier instalments have been paid for in full Any periods of time quoted or accepted by the company for dispatch delivery or completion of the order are to commence from dispatch of the company s acceptance of the buyer s order and receipt of all necessary information and drawings to enable the company to commence the work. Any such periods are to be treated as estimates only, not involving the company in any liability to the buyer in respect of loss suffered as a result of failure to dispatch, deliver or complete within such a period of time, and no delay shall entitle the buyer to cancel the order or refuse to accept delivery at any time The company shall not be liable to the buyer for any delay or failure to meet its obligation under the contract as a direct result of any force majeure including but not limited to strike, war or act of war, insurrection, riot or civil commotion, act of public enemy, fire, flood or other case caused beyond the control of the company. 4. CLAIMS 4.. Notice of any claim relating to shortage or damage to the goods shall be made to the company and the carrier of the goods in writing within 8 days of receipt of the goods or such time period as may be required by the carrier s conditions is less Notice of any claim related to loss or non-delivery of goods shall be made to the company and the carrier of the goods in writing within 7 days in receiving the advice note in respect thereof or such other time period as may be required by the carrier s conditions is less The company will consider claims only if the above conditions are met and the claim is signed by the customer and accompanied by full particulars giving the invoice and buyer s order number, and as the case may be, the case number, the condition of the case or packing and the copy of the delivery not in respect of the goods The company s liability hereunder in respect of any shortage loss or damage to the goods shall be limited to the proportion of the price attributable to the goods undelivered lost or damaged. 5. SALES CONDITIONS 5.. Unless otherwise stated, the prices in any quotations by the company is based on the current cost of material, labour, duties, taxes, exchange rates, and of conforming to statutory obligations ruling ate the date of such quotation is subject to adjustment Prices contained in a quotation are subject to revision if the buyer shall have omitted to give instructions in sufficient details, or his requirements are for quantity or delivery schedules or other terms different from those against which the prices are quoted, including without limitation changes in local or national site working practices Minimum amount of the order is , otherwise administrative fee of 8.00 will be invoiced For first order, payment must be before the delivery. For following orders and unless otherwise agreed in writing, payment shall be due in full thirty days from the date of delivery note or invoice issue Where only parts of the goods are dispatched, payment shall be made of the contract price attributable to that part In the event of any delay or delays in manufacture, dispatch or delivery which are attributable to the buyer s actions or failure to act, the buyer shall at the discretion of the company either make payment to the company in accordance with the above as if the goods have been delivered at the time at which but for such delay or delays would have taken place or make a partial payment to the company in accordance with the above based upon the proportion of the order completed at the date of and due from the date of which delay was notified. 6. LATE PAYMENT 6.. The company reserves the right to charge interest on late payment of 2% per annum above the base rate quoted by European bank from time to time on the daily balance from the due date until payment is made If any payment falls into arrears the company shall have the right to cancel or postpone performance of any contract with the buyer wholly or in part and to be paid immediately for performance of such contract to date. Printed on /0

10 C.I.F GENERAL SALES CONDITIONS Page 2/2 7. RISK AND TITLE 7.. Risk passes to the buyer on delivery of the goods Whilst risk in goods supplied to the buyer under the contract shall pass on delivery, legal and beneficial ownership of the goods shall remain with the company until such time as the company has received payment in full for all goods supplied to the buyer or until such time as the goods are sold to the buyer s customers by way of bona fide sale at full market (whichever shall be the earlier) and until such time the buyer shall keep such goods separate from its property and clearly identified as the property of the company Notwithstanding terms of payment specified herein or elsewhere payment for all goods supplied to the buyer shall become due immediately upon the commencement of any act or proceeding in which the buyer s solvency is involved or upon the appointment of a receiver over the whole of any part of the buyer s assets or undertaking and upon such occurrence the power of sale granted to the buyer shall automatically determine If payment for any goods is overdue whether in whole or in part and any goods have been delivered to the buyer, the company may without prejudice to any of its other rights enter upon the buyer s premises to recover the goods and/or resell the goods or such of them as the company in its absolute discretion may designate 7.5. Until the company is paid in full for all goods supplied, the buyer is and shall remain a fiduciary for the company in respect of the goods and if the buyer sells or allows to be sold the goods, the proceeds of sales shall be held in a separate clearly identifiable and the beneficial interest shall attach to the proceeds of sale and the company shall have the right to trace such proceeds of sale If any of the goods are incorporated or used in other products before full payment for all goods supplied under the contract has been made, title in such product shall be and remain with the company until full payment has been made or such products have been sold and all of the above provisions of this clause shall extend to such products. 8. INDUSTRIAL PROPERTY RIGHTS 8.. The buyer shall indemnify the company in respect of, any infringement which is due to the company having followed a design or instruction furnished or given by the buyer, or the use of such goods in a manner or for a purpose or in a foreign country not specified by or disclosed to the company, or any infringement which is due of such goods in association or combination with any other goods not supplied by the company AND PROVIDED ALSO that this indemnity is conditional on the buyer giving to the company the earliest possible notice in writing of any claim being made or action threatened or brought against the buyer and on the buyer permitting the company at its own exclusive conduct of any litigation that may ensue and all negotiations for a settlement of claim. The buyer on its parts warrants that any design or instruction furnished or given by it shall not be such as will cause the company to infringe any Letter Patent, Registered Design, Trade or Service Mark, copyright or any other industrial property right of whatsoever nature owners or enjoyed by any third in the execution of the contract Any design and/or tooling charges charged to the customer does not constitute the transfer of ownership which at all times remains with C.I.F., unless agreed in writing between the parties concerned. ANY CONDITIONS on the customer in contrary to the above are not accepted. 9. CANCELLATION 9.. The buyer may not vary or cancel the contract or any part thereof without the written consent of the company which, if given, shall be deemed to be on the express condition that the buyer shall indemnify the company against all loss, damage claims actions and loss of profit arising out of such cancellation unless otherwise agreed in writing The company may at its option cancel/suspend all further deliveries under the contract in the event of default by the buyer in making any payments due hereunder or and any other contract between the buyer and the company or shall die or become bankrupt or enter into liquidation or have a receiver appointed to all or any part of its undertaking or assets or shall offer to or enter into arrangement with his or its creditors or any of them or fail to comply with any statutory demand or do or suffer any similar act which evidences insolvency. 0. LAW 0.. The contract shall be deemed to be a contract made in FRANCE and shall be construed according to the law of FRANCE. Any dispute shall be referred to the Tribunal of Commerce of Yvelines in Versailles (F-78). Printed on /0