Master Distributor Stock Components
|
|
- Cameron Allison
- 6 years ago
- Views:
Transcription
1 Bulletin HY /US Master Distributor Stock Components Effective: May 1, 2003 Supersedes: Catalog No. DSC-7000 dated 7/1/01 Model V10 Model V11 Model V12 Model V20 Model 25P Model V40 Model V42 Model V50 Model V70 Model V90 Models HCJ, HCS, HCF Models SP, SPK, SSK Models 300/400 Port Plugs Solenoid Cartridge and Coil Kits V20EH and V040 DCV
2 Bulletin HY /US Master Distributor Stock Components WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Copyright 2003, Parker Hannifin Corporation, All Rights Reserved Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the "Offer of Sale". II Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
3 Bulletin HY /US Contents Master Distributor Stock Components Offer of Sale... IV Model V Model V Model V12...Phaseout Product Model V Model 25P...Phaseout Product Model V40...Phaseout Product Model V42...Phaseout Product Model V50...Phaseout Product Model V Model V Models HCJ, HCS, HCF...Phaseout Product Models SP, SPK, SSK Models 300/ Port Plugs Solenoid Cartridge and Coil Kits III Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
4 Bulletin HY /US Offer of Sale Master Distributor Stock Components The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer s order for any such items, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute acceptance of this offer. 1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Seller s products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyer s acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Seller s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer s assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyer s offer, Acceptance of Seller s products shall in all events constitute such assent. 2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Amounts not timely paid shall bear interest at the maximum rate permitted by law for each month or portion thereof that the Buyer is late in making payment. Any claims by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyer s receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Seller s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller s delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the items sold hereunder shall be free from defects in material or workmanship for a period of 18 months from date of shipment from Parker Hannifin Corporation. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WAR- RANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHAT- SOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIM- ITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR AC- QUIRED WHOLLY OR PARTIALLY, TO BUYER S DESIGNS OR SPECIFICATIONS. 5. Limitation Of Remedy: SELLER S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CON- TRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR RE- PLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLER S SOLE OPTION. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUEN- TIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSO- EVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAIL- URE TO WARN OR STRICT LIABILITY. 6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification or cancellation shall be at Seller s discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Seller s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. Buyer s Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer s property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property, Seller shall not be responsible for any loss or damage to such property while it is in Seller s possession or control. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual Property Rights ). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Seller s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said item so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Seller s sole and exclusive liability and Buyer s sole and exclusive remedy for infringement of Intellectual Property Rights. If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Seller s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter Events of Force Majeure ). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Seller s control. 12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues. 9/91-P IV Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70 Parker Hannifin Corporation Hydraulic Valve Division 520 Ternes Avenue Elyria, Ohio, USA Tel: (440) Fax: (440) Bulletin HY /US, 3.5M, 4/03, Hecks
71 V20EH Open-Center Directional Control Valve Build Program Bulletin HY B1/US Refer to PL HY /US for current pricing information
72 Bulletin HY B1/US Contents Open-Center Directional Control Valve V20EH Build Program Technical Information General Description...1 Operation...1 Benefits...2 Assembly Callout Drawing...2 Specifications...3 Weights...3 Connections...3 Ordering Information Inlet...4 Mid-Inlets...4 Main Relief Options...4 Outlet...4 Stud Assembly Kits...5 Utility Sections...5 Work Section, Standard...6 Work Section, Handle Override...6 Work Section, Single Ended...7 Accessories...8 V20 Solenoid Options...8 Offer of Sale...II Safety Guide...II WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. OFFER OF SALE The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at SAFETY GUIDE For safety information, see Safety Guide SG HY at or call CParker. Copyright 2012, Parker Hannifin Corporation, All Rights Reserved II Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
73 Bulletin HY B1/US Technical Information Open-Center Directional Control Valve V20EH Build Program General Description The V20 has been a strong and reliable player in the LPM (20-26 GPM) open-center, directional control valve market for many years. Now it has a new, electrohydraulic package designed for open-center systems and for those customers wanting to take machine control to the next level. The offering consists of the following: A global solenoid (pwm) that can be used for proportional or on/off control. The coils have a molded on Amp Jr. or Deutsch connector. Work Section Work sections rated to 240 Bar (3500 PSI): 4-way, 3-position; and 3-way, 3-position. A pilot generating/regulating section that is referred to as a utility section. The purpose of this section is to generate and regulate pilot pressure in an opencenter circuit. This section is to be placed adjacent to the outlet cover. Work Section, On/Off only Solenoid (1 piece) Utility Section Operation Open-center valves that are operated by either hydraulic-remotes or electrohydraulics require a way to generate and regulate the pilot pressure. For hydraulic-remote operation, the regulated pilot pressure is needed for the pilot controllers. For electrohydraulic operation, the regulated pilot pressure is required for the work section solenoids. Generation and regulation of the pilot signal can be accomplished externally with an in-line solution, however, this approach requires extra plumbing. The V20 has an integrated section that selectively generates and regulates the pilot pressure to be sent to the hydraulic-remote controllers, or the solenoids installed in the work section. When an operator selects a spool, a signal is sent to a normally open solenoid in the utility section. Pressure will then build until it reaches the setting of the buildup cartridge. This is sufficient pressure to move the main spool, so that it can be connected to the load pressure. At that point, the inlet of the valve will see system pressure, and the pressure-reducing valve in the utility section will regulate the pilot pressure to the hydraulicremote controllers or the work section solenoids. For electrohydraulic operation, optimizing machine control is achieved by having a dedicated drain for the work section solenoids. Therefore, the V20EH package isolates the solenoid within the control valve, and the solenoid drain port is located in the inlet. 1 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
74 Bulletin HY B1/US Technical Information Open-Center Directional Control Valve V20EH Build Program Benefits The pressure required to move the spools is generated and regulated internal to the V20 valve. This eliminates the need for any in-line devices and the associated plumbing which saves installation cost. Minimal impact on open-center pressure drops when the main spools are in neutral. This is because pressure generation is triggered to on, only when a spool is selected. The benefit is less heat generation and reduced fuel consumption. Minimal impact on loop pressure drops: P-A/B and A/B-T which maximizes horsepower utilization. There is an option to have the mechanical buildup for full on-time operation, useful in many applications where the PTO is engaged only when work is to be done. A dedicated solenoid drain to the reservoir optimizes solenoid performance. This translates into consistent metering and machine controllability. An extended bonnet for screw-adjustable work port relief valves in an option available for those applicatons requiring this type of adjustable pressure control (consult factory). Handle with manual override. 2 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
75 Bulletin HY B1/US Technical Information Open-Center Directional Control Valve V20EH Build Program Specifications Pressures Flow Rates (maximum recommended) Leakage Performance Hydraulic Fluid Hydraulic Oil Temperature Filtration (ISO4406) Weights Inlet with relief Work section manual spring return Work section hydraulic remote Work section solenoid operated Work section pilot generation Add for port relief Outlet Pump Inlet Ports: 240 Bar (3500 PSI) Service Ports: 276 Bar (4000 PSI) Pilot: 35 Bar (508 PSI) (input or internal supply) Tank Return Ports: 15 Bar (220 PSI) Solenoid Drain: 2 Bar (29 PSI) 95 LPM (25 GPM) Mineral oil, C ( Bar (1000 PSI) 12 cc/min with no port accessories 22 cc/min with an RV or RV & AC Mineral Base oil For other fluids, consult factory Viscosity, working range: mm²/s ( cst) Recommended Operating Range without Solenoid Operation: -30 to 90 C (-22 to 194 F) Recommended Operating Range with Solenoid Operation: -20 to 80 C (-4 to 176 F) 20/18/14 in Main Flow Paths 18/16/13 Pilot Supply 3.5 kg (7.8 lbs) 4.4 kg (9.7 lbs) 4.5 kg (9.9 lbs) 6.2 kg (13.6 lbs) 4.1 kg (9.1 lbs) 0.1 kg (0.2 lbs) 1.5 kg (3.4 lbs) Solenoid Specifications Voltage Frequency Pilot Current Input (I) Current (ma) for Spool Shift Start Shift Full Shift Insulation Material 12 or 24 VDC 100 ±10 Hz 35 Bar (508 PSI) LPM (4-6 GPM) 1.5A for 12 VDC 0.75A for 24 VDC 12V 24V Class H Duty Cycle 100% R20 Ohm 4.72 (±5%) for 12 VDC (±5%) for 24 VDC Fluid 17/14 per ISO 4406 Cleanliness Ambient -30 to 80 C (-22 to 176 F) Temperature Fluid -20 to 80 C (-4 to 176 F) Temperature Connections O-ring boss ports SAE-J BSPP ports ISO Description SAE# O-ring boss BSPP Inlet Port, Top or Side Outlet Port, Top or Side /16"-12 UNF 3/4" /16"-12 UNF 3/4"-14 Work Ports /16"-12 UNF 3/4"-14 Work Ports 10 7/8"-14 UNF 1/2"-14 3 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
76 Bulletin HY B1/US Ordering Information Open-Center Directional Control Valve V20EH Build Program V20EH Inlet Covers Poduct Code Part Number Side HP Side LP SAE-12 Top HP Top LP SAE-12 Pilot Drain SAE-6 End 20-LC-12-EH SAE-12 X SAE-6 X X 20-LC-12T-EH SAE-6 X SAE-12 X X NOTES: 1. See main relief options below. 2. The top HP port has a steel plug with an SAE-4 gage port. 3. The top LP port has a steel plug. V20EH Mid-Inlet Sections Combined Split HP Product Code Part Number Flow Flow SAE-12 Top SF-EH X X CF-EH X X NOTES: 1. Connects pilot and drain passages between upstream and downstream work sections. 2. See main relief valve options below. V20EH Main Relief Options Product Code Part Number No R/V PSI PSI PSI PSI PSI PSI Option WH X WH X WH X WH X WH X RP51A-3000 RP51A-3000 X K-20-NR X K-WH-A External Screw Adjustable Option for WH Relief V20EH Outlet Covers Product Code Part Number Side LP SAE RC-12-EH-E X NOTE: 1. Contact factory for power beyond options. 4 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
77 Bulletin HY B1/US Ordering Information Open-Center Directional Control Valve V20EH Build Program V20EH Section Stud Assembly Kits Product Code Part Number With Utility Section Without Utility Section (4) K-20-EH One Section K-20-EH One Section Two Sections K-20-EH Two Sections Three Sections K-20-EH Three Sections Four Sections K-20-EH Four Sections Five Sections K-20-EH Five Sections Six Sections K-20-EH Six Sections Seven Sections K-20-EH Seven Sections Eight Sections K-20-EH Eight Sections Nine Sections NOTES: 1. Kits include studs, face seals and nuts. 2. Remember to add the utility section to the section count. 3. Stud torque is 28 ft-lb. 4. For external pilot applications. V20EH Pilot Generating Utility Sections 12V Product Code Part Number (Note 3) Deutsch Connector 8" Lead Wires Pilot Pressure Always "On" 20-UT-EH X X 20-UT-EH-12-D X X 20-UT-EH-MECH X 20-UT-EH-CC Contact factory for closed center applications. X 20-UT-EH-PB Contact factory for power beyond applications. K-20-EH-EP See note below for external pilot bonnet kits. NOTES: 1. Utility section must be stacked directly adjacent (upstream) to the outlet cover. 2. Solenoid has 6" lead wires terminated with Deutsch DT04-2P receptacle with pin terminals. 3. For 24V applications, please consult factory. 4. Use K-20-EH-EP, when a regulated external pilot signal is available. One bonnet per side must have pilot pressure for the bank to operate. Kit contains both bonnets. 5. Pilot pressure factory 500 PSI. 5 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
78 Bulletin HY B1/US Ordering Information Open-Center Directional Control Valve V20EH Build Program V20EH Parallel Work Sections (Housing 10954) - 12V Solenoid Product Code Part Number 3-Way 3-Pos 4-Way 3-Pos 4-Way 3-Pos Free Flow SAE 10 Ports SAE 12 Ports Amp Jr EH-12-A X X X EH-12-A X X X EH-12-A X X X EH-12-A X X X F4-EH-12-A X X X F4-EH-12-A X X X Amp Jr. w/pin Override Deutsch EH-12-A X X X EH-12-A X X X EH-12-A X X X EH-12-A X X X F4-EH-12-A X X X F4-EH-12-A X X X EH-12-D X X X EH-12-D X X X EH-12-D X X X EH-12-D X X X F4-EH-12-D X X X F4-EH-12-D X X X NOTES: 1. These work sections can be used as ON/OFF or proportional depending on the signal input to the solenoids. 2. For 24V applications, please consult factory. 3. All bonnets are machined to accept the standard spool travel limiter/manual override kits. 6 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
79 Bulletin HY B1/US Ordering Information Open-Center Directional Control Valve V20EH Build Program V20EH Parallel Work Sections (Housing 10954) Handle Override - 12V Solenoid Product Code Part Number 3-Way 3-Pos 4-Way 3-Pos 4-Way 3-Pos Free Flow SAE 10 Ports SAE 12 Ports Amp Jr EH-12-A1-HRO X X X EH-12-A1-HRO X X X EH-12-A1-HRO X X X EH-12-A1-HRO X X X F4-EH-12-A1-HRO X X X F4-EH-12-A1-HRO X X X Deutsch EH-12-D-HRO X X X EH-12-D-HRO X X X EH-12-D-HRO X X X EH-12-D-HRO X X X F4-EH-12-D-HRO X X X F4-EH-12-D-HRO X X X NOTES: 1. These work sections can be used as ON/OFF or proportional depending on the signal input to the solenoids. 2. For 24V applications, please consult factory. 3. All bonnets are machined to accept the standard spool travel limiter/manual override kits. 4. Note that the travel limiter/manual override for each side is different. Both are listed in the accessories. V20EH Parallel Work Sections (Housing 10954) Single Ended - 12V Solenoid Product Code Part Number 3-Way 3-Pos 4-Way 3-Pos 4-Way 3-Pos Free Flow SAE 10 Ports SAE 12 Ports Amp Jr EH-12-A1-SE X X X EH-12-A1-SE X X X EH-12-A1-SE X X X EH-12-A1-SE X X X F4-EH-12-A1-SE X X X F4-EH-12-A1-SE X X X Deutsch EH-12-D-SE X X X EH-12-D-SE X X X EH-12-D-SE X X X EH-12-D-SE X X X F4-EH-12-D-SE X X X F4-EH-12-D-SE X X X NOTES: 1. These work sections can only be used as ON/OFF. 2. The standard clevis and handle bracket are present on the front side of the valve. 3. For 24V applications, please consult factory. 7 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
80 Bulletin HY B1/US Ordering Information Open-Center Directional Control Valve V20EH Build Program V20EH Accessories Product Code Part Number Description K-20-TL-MO-S Screw type travel limiter/manual override. Note 1 K-20-TL-IH Screw type travel limiter for handle side on handle override sections. Note 2 K-20-EH-EP External pilot bonnet kit. Note 3 K-20-CONT-ON Utility Section Mechanical Pressure control cartridge. K CNTRL Utility Section 12V Pressure control cartridge. K CNTRL Utility Section 24V Pressure control cartridge. NOTES: 1. These override kits will not fit into the Single Ended (SE) sections. 2. Use this kit for the Handle Override side of the valve only, use K-20-TL-MO-S for the opposite side. 3. Two bonnets are included in this kit. V20EH Solenoid Options Product Code Part Number 12V 24V Amp Jr Amp Jr w/manual Deutsch Override 20-EH-12-A X X 20-EH-12-A X X 20-EH-12-D X X 20-EH-24-A X X 20-EH-24-A X X 20-EH-24-D X X K-20-A1-LW Amp Jr connector with 8" long lead wires. Note 1 NOTE: This is a mating connector to the Amp Jr Coils with 8" leads. 8 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
81 Extensive Hydraulic Product Offering Accumulators Compact Hydraulics Cylinders Electronics/Remote Controls Piston, bladder and diaphragm type accumulators, gas bottles and KleenVent reservoir isolators. Self-contained with a motor, gear pump, reservoir, internal valving, load hold checks and relief valves. Standard and custom hydraulic cylinders for industrial and mobile applications. Parker s unique IQAN approach combines sturdy, well-tested hardware with intelligent, flexible computing power Filtration Integrated Hydraulic Circuits Motors Power Take Off Pressure and return line filters enhances machine life, reduces maintenance and lowers costs. Solutions for complex circuits that include threaded cartridge valves integrated into a single manifold. Full line of high and low speed motors provides power up to 15,000 in-lbs of torque. Parker Chelsea leads the industry for engineering, innovation and performance in auxiliary power systems Power Units Pumps Rotary Actuator Valves and Controls The most complete line of standard, pre-engineered, cataloged hydraulic power units in the industry. Broad line of energyefficient hydraulic pumps that includes piston, vane and gear pumps. Industry leader in the design and manufacture of hydraulic rack and pinion, and vane style rotary actuators. Hydraulic valves for virtually every hydraulic equipment application, from simple to precise control Covering the Industrial and Mobile markets, each catalog is paired with an interactive DVD. Call for your comprehensive guides today C-Parker. Mobile Hydraulics Bulletin HY /US Industrial Hydraulics Bulletin HY /US
82 Parker Hydraulics International Sales Offices North America Hydraulics Group Headquarters 6035 Parkland Boulevard Cleveland, OH USA Tel: Fax: Parker Canada Division 160 Chisholm Drive Milton, Ontario, L9T 3G9 Canada Tel: Fax: Mexico Parker Hannifin de México Industrial Hydraulic Sales Eje Uno Norte No. 100 Parque Industrial Toluca 2000 Toluca, Edo. de Mexico CP Tel: Fax: Europe Hydraulics Group Headquarters La Tuilière 6 CH-1163 Etoy, Switzerland Tel: Fax: Latin America Parker Hannifin Ind. e Com. Ltda Hydraulics Division Av. Frederico Ritter, Cachoeirinha RS, Brazil Tel: Fax: Parker Hannifin Argentina S.A.I.C. Stephenson Tortuguitas-Malvinas Argentinas Pcia. de Buenos Aires, Argentina Tel: Fax: Pan American Division 7400 NW 19th Street, Suite A Miami, FL USA Tel: Fax: Industrial Sales Central Region 1042 Maple Avenue Unit 331 Lisle, IL USA Tel: Great Lakes Region 6035 Parkland Boulevard Cleveland, OH USA Tel: Fax: Gulf Region Standing Cypress Drive Spring, TX USA Tel: Fax: Southwest Region 700 S. 4th Avenue Mansfield, TX USA Tel: Fax: Mid Atlantic & Southeast Regions 1225 Old Alpharetta Rd Suite 290 Alpharetta, GA USA Tel: Fax: Midwest Region 8145 Lewis Road Minneapolis, MN USA Tel: Fax: Northeast Region P.O. Box 396 Pine Brook, NJ USA Tel: Fax: Northwest Region 6458 North Basin Avenue Portland, OR USA Tel: Fax: Pacific and Plains Region 8460 Kass Drive Buena Park, CA USA Tel: Fax: Mobile Sales Mobile Sales Organization and Global Sales 850 Arthur Avenue Elk Grove Village, IL USA Tel: Fax: Asia Pacific Parker Hannifin Shanghai Ltd. 280 Yunqiao Road, Jin Qiao Export Processing Zone Shanghai , China Tel: Fax: Parker Hannifin Hong Kong Ltd. Suites 01-04, 20/F, Tower 2, The Gateway, Harbour City, Tsimshatsui, Hong Kong Tel: Fax: Parker Hannifin Korea Ltd. 18F KAMCO Yangjae Tower Dogok1-dong, Gangnam-gu Seoul, , Korea Tel: Fax: Parker Hannifin India Pvt Ltd. Plot No. EL-26, MIDC, TTC Industrial Area Mahape, Navi Mumbai, , India Tel: Fax: Parker Hannifin Australia Parker Hannifin Pty Ltd. 9 Carrington Road Castle Hill, NSW 2154, Australia Tel: Fax: South Africa Parker Hannifin Africa Pty Ltd 10 Berne Avenue Aeroport Kempton Park 1620, Republic of South Africa Tel: Fax: Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Valve Division 520 Ternes Avenue Elyria, Ohio USA Tel: Fax: Bulletin HY B1/US, 3/12 Your Local Authorized Parker Distributor
83 VO40 Open-Center Directional Control Valve Build Program Bulletin HY B2/US Refer to PL HY /US for current pricing information
84 Bulletin HY B2/US Contents Open-Center Directional Control Valve VO40 Build Program Technical Information General Description...1 Operation...1 Benefits...1 Specifications...2 Ordering Information Inlet Covers...3 Main Inlet Relief Options...3 Outlet Covers...3 Outlet Cover Option Kits...3 Parallel Work Sections with Machined Upper Option Cavities...4 Parallel Work Sections without Machined Upper Option Cavities...4 Tandem Work Sections with Machined Upper Option Cavities...5 P.O. Check (Lock Out) Work Section...5 Spool Positioners/Actuators...6 Handle Option Kits...6 Mechanical Joysticks...6 Section Stud Assembly Kits...7 Direct-Acting Workport Relief Options...7 Offer of Sale...8 WARNING USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. OFFER OF SALE The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the detailed Offer of Sale elsewhere in this document or available at SAFETY GUIDE For safety information, see Safety Guide SG HY at or call CParker. Copyright 2012, Parker Hannifin Corporation, All Rights Reserved Bulletin HY B2.indd, dd II Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
85 Bulletin HY B2/US Technical Information Open-Center Directional Control Valve VO40 Build Program General Description The VO40 Build Program is designed to help a stocking distributor increase the value and services offered to their customers. This is accomplished by having the in-house capability of being responsive to your customer s needs. Its stackable design and modularity enables the distributor to build an almost unlimited number of assemblies with a limited level of inventory. A wide variety of sections and kits facilitate conversion and customization of valve stack assemblies for your customers. Valve assemblies are comprised of an inlet cover plus main relief options, work sections plus relief and positioner options, an outlet cover plus conversion options, and a stacking kit. All of these components are available in the Build Program, giving you the flexibility to build just about any arrangement imaginable. The basic kits for the program are: Inlet covers Outlet covers Inlet cover relief valve options Outlet conversion kits Work sections Handle kits Work section relief valve options Tie bolt stacking kits Work section positioner options Operation The VO40 valve incorporates traditional open-center technology. It is usually interfaced with a constant flow pump, whose flow is routed directly to tank when the spools are in neutral. When one or more spools are selected, flow is directed to the actuators. The throttling of that flow depends upon the spool position and the design of the metering notches. Spool notches can be designed to accommodate resistive loads (meterin) and negative loads (meter-out). To accommodate multiple pump circuits, split flow and combined flow mid-inlets are available. bulletin HY B2.indd, m&a Benefits Enhanced metering especially during simultaneous operation, this is accomplished by having notches in the three critical areas of the spool: open center, parallel path and tank. Improved simultaneous metering having a transition check in each work section ensures that a load does not dip downward when metering two or more work-sections. Repeatability consistent metering from valve to valve is achieved by flycutting all of the critical cast lands. This means that the notch position relative to the spool stroke is controlled and predictable. The result is consistent machine control. Reduced operator fatigue the open-center core is a split wing or Y core design, which provides for a consistent lever force when selecting the spool from neutral to both power positions. Reduced function drift low internal leakage accomplished thru the use of contemporary honing technology. Also, for those functions requiring near zero drift, pilot-operated checks are available. Small footprint port accessories are installed vertical to the spool, allowing the handle to be positioned closer to the valve body. Ease of service the bottom two stud assemblies are slotted, enabling a work section to be replaced without completely disassembling the valve assembly. This is accomplished by loosening the top tie bolt and then lifting the section out of the assembly. Downtime is minimized. Easy conversion from a left-handed to a right-handed section the work section housing and spool are symmetrical, which enables the spool to be inserted in either end of the housing. Improved spool seal life the enclosed handle assembly protects the spool and spool seal area from contamination and the potential corrosion. 1 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
86 Bulletin HY B2/US Technical Information Open-Center Directional Control Valve VO40 Build Program Specifications Pressures Flow Rates (maximum recommended) Internal Pilot Pressure Spool Leakage from work port to tank Inlet Port: 300 Bar (4350 PSI) Tank Port: 50 Bar (725 PSI) Work Ports: 300 Bar (4350 PSI) 40 LPM (10.6 GPM) Required for solenoids consult factory Max Bar (2500 PSI) Oil temp. 50ºC (122ºF), and viscosity 40 cst Weights Weights are approximate due to number of variations available Inlet with relief Outlet Work section with reliefs and manual actuator Work section and manual actuator without reliefs Work Section, PO Checks with manual actuator Joystick assembly 1.92 kg (4.2 lbs) 1.88 kg (4.1 lbs) 1.93 kg (4.3 lbs) 1.98 kg (4.4 lbs) 2.1 kg (4.6 lbs) 0.8 kg (1.8 lbs) Connections Standard valves are available in SAE-6 or SAE-8 (J1926/1). Also available in 3/8" BSP (DIN 3852/2). Connection Location SAE -8 SAE-6 BSP P1, P2 Inlet ¾-16 UNF >\zn-18 UNF C\,-19 T1, T2 Inlet ¾-16 UNF >\zn-18 UNF C\,-19 P3 Outlet ¾-16 UNF >\zn-18 UNF C\,-19 T3 Outlet ¾-16 UNF >\zn-18 UNF C\,-19 PB1 Outlet ¾-16 UNF >\zn-18 UNF C\,-19 Work Ports GAGE PORT PC (Hyd. Conn.) PT (Pneu.Conn.) Work Sections ¾-16 UNF >\zn-18 UNF C\,-19 Inlet M\zn-20 UNF M\zn-20 UNF ¼ Work Sections Work Sections M\zn-20 UNF M\zn-20 UNF ¼ Z\, NPT Z\, NPT Z\, NPT bulletin HY B2.indd, m&a 2 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
87 Bulletin HY B2/US Ordering Information Open-Center Directional Control Valve VO40 Build Program VO40 Inlet Covers Item No. Part Number End Inlet End Outlet Top Inlet Top Outlet 1 VO40-LC-08 NOTE: A SAE 4 gage port (plugged) is located on the end, opposite the main RV. Two SAE port plugs are installed in the top ports. SAE 8 Ports VO40 Main Relief Options Item No. Part Number Description 1 RCP-15A No Relief Plug Kit 2 CRV-15B-2500 Pilot-Operated Relief Valve Cartridge 2500 PSI C/P 3 CRV-15F-2500 Direct-Acting Relief Valve Cartridge 2500 PSI C/P NOTE: CRV-15B Relief Valve is screw adjustable from PSI. CRV-15F Relief Valve is screw adjustable from PSI. VO40 Outlet Covers Item No. Part Number Top Outlet End Outlet SAE 8 Machined for Power Beyond 1 VO40-RC-08 NOTE: Two SAE port plugs are installed, one top port and one side port. VO40 Outlet Cover Conversion Kits Item No. Part Number Description 1 K-PB-08 SAE 8 Power Beyond Sleeve 2 K-CC-PLUG Closed Center Plug bulletin HY B2.indd, m&a 3 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
88 Bulletin HY B2/US Ordering Information Open-Center Directional Control Valve VO40 Build Program VO40 Parallel Work Sections with Machined Upper Option Cavities Item No. Part Number SAE 6 SAE 8 3-Way 3-Pos 4-Way 3-Pos 4-Way 3-Pos Free Flow 4-Way 4-Pos Float Spring Return to Neutral Enclosed Handle Bracket 1 VO VO VO40-06-F4 4 VO40-06-K4 5 VO VO VO40-08-F4 Less Handle Bracket 8 VO40-08-K4 The work sections listed above all have the upper work port relief option cavities machined and plugged. Work sections marked -LB (Less Handle Bracket) have a spool with a female clevis. Handle rod/knob sold separately as shown on page 6. VO40 Parallel Work Sections without Upper Option Cavities Item No. Part Number SAE 6 SAE 8 3-Way 3-Pos 4-Way 3-Pos 4-way 3-Pos Free Flow 4-Way 4-Pos Float Spring Return to Neutral Enclosed Handle Bracket 1 VO40-06-N-03 2 VO40-06-N-04 3 VO40-06-N-F4 4 VO40-06-N-K4 5 VO40-08-N-03 6 VO40-08-N-04 7 VO40-08-N-F4 Less Handle Bracket 8 VO40-08-N-K4 The N in the work sections listed above designates that the the upper work port relief option cavities are NOT machined. Work sections marked -LB (Less Handle Bracket) have a spool with a female clevis. If the application requires work port option cartridges (i.e. reliefs or anti-cavitation checks) do not select from this group. Handle rod/knob sold separately as shown on page 6. bulletin HY B2.indd, m&a 4 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
89 Bulletin HY B2/US Ordering Information Open-Center Directional Control Valve VO40 Build Program VO40 Tandem Work Sections with Machined Upper Option Cavities Item No. Part Number SAE 6 SAE 8 3-Way 3-Pos 4-Way 3-Pos 4-Way 3-Pos Free Flow 4-Way 4-Pos Float Spring Return to Neutral Enclosed Handle Bracket 1 VO40T VO40T VO40T-06-F4 4 VO40T-06-K4 5 VO40T VO40T VO40T-08-F4 8 VO40T-08-K4 The work sections listed above all have the upper work port relief option cavities machined and plugged. Work sections marked -LB (Less Handle Bracket) have a spool with a female clevis. Handle rod/knob sold separately as shown on page 6. Less Handle Bracket VO40 P.O. Check (Lock Out) Work Section Item No. Part Number SAE 6 SAE 8 4-Way 3-Pos Pilot Operated Checks Spring Return to Neutral Enclosed Handle Bracket 1 VO40-06-L04 2 VO40-08-L04 Work sections marked -LB (Less Handle Bracket) have a spool with a female clevis. Handle rod/knob sold separately as shown on page 6. Less Handle Bracket bulletin HY B2.indd, m&a 5 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
90 Bulletin HY B2/US Ordering Information Open-Center Directional Control Valve VO40 Build Program VO40 Spool Positioners/Actuators K-VO40-D K-VO40-RI Item No. Part Number Description 1 K-VO40-D 3-Position detent positioner kit 2 K-VO40-RI Spool in detent, with spring return to neutral positioner kit 3 K-VO40-RO Spool out detent, with spring return to neutral positioner kit 4 K-VO40-RIO Spool in & out detent, with spring return to neutral positioner kit 5 K-VO40-S Spring return to neutral positioner kit 6 K-VO40-PA1 Pneumatic spool actuator kit 7 K-VO40-2C Dual clevis extension kit K-VO40-RO K-VO40-RIO K-VO40-S K-VO40-PA1 K-VO40-2C VO40 Handle Option Kits Item No. Part Number Description 1 K-VO40-H1 Straight Handle Lever Kit 2 K-VO40-H2 Offset Handle Lever Kit Not included with valve work-section assemblies. bulletin HY B2.indd, m&a 6 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
91 Bulletin HY B2/US Ordering Information Open-Center Directional Control Valve VO40 Build Program VO40 Section Stud Assembly Kits Item No. Part Number Description 1 K-VO40-1 Stud Kit for (1) Work Section 2 K-VO40-2 Stud Kit for (2) Work Sections 3 K-VO40-3 Stud Kit for (3) Work Sections 4 K-VO40-4 Stud Kit for (4) Work Sections 5 K-VO40-5 Stud Kit for (5) Work Sections 6 K-VO40-6 Stud Kit for (6) Work Sections NOTE: Each stud kit includes (3) studs and (6) nuts (sect. seals are included with sections). Stud Bolt Torque: Ft Lbs (15-19 Nm) VO40 Direct-Acting Workport Relief Options Item No. Part Number 2.5 GPM Relief Valve Anti-Cav 1 VO40 RV/AC PSI 2 VO40 RV/AC PSI 3 VO40 RV/AC PSI 4 VO40 RV/AC PSI 5 VO40 RV/AC PSI 6 VO40 RV/AC PSI 7 VO40 RV/AC PSI 8 VO40 RV/AC PSI 9 VO40 RV/AC PSI 10 VO40 RV/AC PSI Straight Anti-Cav 11 VO40-AC N/A No Relief Plug 12 VO40-NR N/A bulletin HY B2.indd, m&a 7 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
92 Bulletin HY B2/US Terms of Sale with Warranty Limitations Offer of Sale The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors ( Seller ) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer ( Buyer ) shall be governed by all of the following Terms and Conditions. Buyer s order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer. All goods, services or work described will be referred to as Products. 1. Terms and Conditions. Seller s willingness to offer Products, or accept an order for Products, to or from Buyer is subject to these Terms and Conditions or any newer version of the terms and conditions found on-line at Seller objects to any contrary or additional terms or conditions of Buyer s order or any other document issued by Buyer. 2. Price Adjustments; Payments. Prices stated on Seller s quote or other documentation offered by Seller are valid for 30 days, and do not include any sales, use, or other taxes unless specifically stated. Unless otherwise specified by Seller, all prices are F.C.A. Seller s facility (INCOTERMS 2010). Payment is subject to credit approval and is due 30 days from the date of invoice or such other term as required by Seller s Credit Department, after which Buyer shall pay interest on any unpaid invoices at the rate of 1.5% per month or the maximum allowable rate under applicable law. 3. Delivery Dates; Title and Risk; Shipment. All delivery dates are approximate and Seller shall not be responsible for any damages resulting from any delay. Regardless of the manner of shipment, title to any products and risk of loss or damage shall pass to Buyer upon placement of the products with the shipment carrier at Seller s facility. Unless otherwise stated, Seller may exercise its judgment in choosing the carrier and means of delivery. No deferment of shipment at Buyers request beyond the respective dates indicated will be made except on terms that will indemnify, defend and hold Seller harmless against all loss and additional expense. Buyer shall be responsible for any additional shipping charges incurred by Seller due to Buyer s acts or omissions. 4. Warranty. Seller warrants that the Products sold hereunder shall be free from defects in material or workmanship for a period of eighteen months from the date of delivery to Buyer. The prices charged for Seller s products are based upon the exclusive limited warranty stated above, and upon the following disclaimer: Disclaimer of Warranty: This WARRANTY comprises the sole and entire WARRANTY pertaining TO products provided hereunder. SELLER DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 5. Claims; Commencement of Actions. Buyer shall promptly inspect all Products upon delivery. No claims for shortages will be allowed unless reported to the Seller within 10 days of delivery. No other claims against Seller will be allowed unless asserted in writing within 30 days after delivery. Buyer shall notify Seller of any alleged breach of warranty within 30 days after the date the defect is or should have been discovered by Buyer. Any action based upon breach of this agreement or upon any other claim arising out of this sale (other than an action by Seller for an amount due on any invoice) must be commenced within 12 months from the date of the breach without regard to the date breach is discovered. 6. LIMITATION OF LIABILITY. UPON NOTIFICATION, SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE A DEFECTIVE PRODUCT, OR REFUND THE PURCHASE PRICE. IN NO EVENT SHALL SELLER BE LIABLE TO BUYER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF, OR AS THE RESULT OF, THE SALE, DELIVERY, NON-DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS OR ANY PART THEREOF, OR FOR ANY CHARGES OR EXPENSES OF ANY NATURE INCURRED WITHOUT SELLER S WRITTEN CONSENT, EVEN IF SELLER HAS BEEN NEGLIGENT, WHETHER IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER S LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE OF THE PRODUCTS. 7. User Responsibility. The user, through its own analysis and testing, is solely responsible for making the final selection of the system and Product and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application and follow applicable industry standards and Product information. If Seller provides Product or system options, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the Products or systems. 8. Loss to Buyer s Property. Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyer s property, will be considered obsolete and may be destroyed by Seller after two consecutive years have elapsed without Buyer ordering the items manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Seller s possession or control. 9. Special Tooling. A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture Products. Such special tooling shall be and remain Seller s property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the Products, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 10. Buyer s Obligation; Rights of Seller. To secure payment of all sums due or otherwise, Seller shall retain a security interest in the goods delivered and this agreement shall be deemed a Security Agreement under the Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute and file on Buyer s behalf all documents Seller deems necessary to perfect its security interest. 11. Improper Use and Indemnity. Buyer shall indemnify, defend, and hold Seller harmless from any claim, liability, damages, lawsuits, and costs (including attorney fees), whether for personal injury, property damage, patent, trademark or copyright infringement or any other claim, brought by or incurred by Buyer, Buyer s employees, or any other person, arising out of: (a) improper selection, improper application or other misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent or otherwise, of Buyer; (c) Seller s use of patterns, plans, drawings, or specifications furnished by Buyer to manufacture Product; or (d) Buyer s failure to comply with these terms and conditions. Seller shall not indemnify Buyer under any circumstance except as otherwise provided. 12. Cancellations and Changes. Orders shall not be subject to cancellation or change by Buyer for any reason, except with Seller s written consent and upon terms that will indemnify, defend and hold Seller harmless against all direct, incidental and consequential loss or damage. Seller may change product features, specifications, designs and availability with notice to Buyer. 13. Limitation on Assignment. Buyer may not assign its rights or obligations under this agreement without the prior written consent of Seller. 14. Force Majeure. Seller does not assume the risk and shall not be liable for delay or failure to perform any of Seller s obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter Events of Force Majeure ). Events of Force Majeure shall include without limitation: accidents, strikes or labor disputes, acts of any government or government agency, acts of nature, delays or failures in delivery from carriers or suppliers, shortages of materials, or any other cause beyond Seller s reasonable control. 15. Waiver and Severability. Failure to enforce any provision of this agreement will not waive that provision nor will any such failure prejudice Seller s right to enforce that provision in the future. Invalidation of any provision of this agreement by legislation or other rule of law shall not invalidate any other provision herein. The remaining provisions of this agreement will remain in full force and effect. 16. Termination. Seller may terminate this agreement for any reason and at any time by giving Buyer thirty (30) days written notice of termination. Seller may immediately terminate this agreement, in writing, if Buyer: (a) commits a breach of any provision of this agreement (b) appointments a trustee, receiver or custodian for all or any part of Buyer s property (c) files a petition for relief in bankruptcy on its own behalf, or by a third party (d) makes an assignment for the benefit of creditors, or (e) dissolves or liquidates all or a majority of its assets. 17. Governing Law. This agreement and the sale and delivery of all Products hereunder shall be deemed to have taken place in and shall be governed and construed in accordance with the laws of the State of Ohio, as applicable to contracts executed and wholly performed therein and without regard to conflicts of laws principles. Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim arising out of or relating to this agreement. 18. Indemnity for Infringement of Intellectual Property Rights. Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Section. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets ( Intellectual Property Rights ). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that a Product sold pursuant to this Agreement infringes the Intellectual Property Rights of a third party. Seller s obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If a Product is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using the Product, replace or modify the Product so as to make it noninfringing, or offer to accept return of the Product and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to Products delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any Product sold hereunder. The foregoing provisions of this Section shall constitute Seller s sole and exclusive liability and Buyer s sole and exclusive remedy for infringement of Intellectual Property Rights. 19. Entire Agreement. This agreement contains the entire agreement between the Buyer and Seller and constitutes the final, complete and exclusive expression of the terms of sale. All prior or contemporaneous written or oral agreements or negotiations with respect to the subject matter are herein merged. 20. Compliance with Law, U. K. Bribery Act and U.S. Foreign Corrupt Practices Act. Buyer agrees to comply with all applicable laws and regulations, including both those of the United Kingdom and the United States of America, and of the country or countries of the Territory in which Buyer may operate, including without limitation the U. K. Bribery Act, the U.S. Foreign Corrupt Practices Act ( FCPA ) and the U.S. Anti- Kickback Act (the Anti-Kickback Act ), and agrees to indemnify and hold harmless Seller from the consequences of any violation of such provisions by Buyer, its employees or agents. Buyer acknowledges that they are familiar with the provisions of the U. K. Bribery Act, the FCPA and the Anti-Kickback Act, and certifies that Buyer will adhere to the requirements thereof. In particular, Buyer represents and agrees that Buyer shall not make any payment or give anything of value, directly or indirectly to any governmental official, any foreign political party or official thereof, any candidate for foreign political office, or any commercial entity or person, for the purpose of influencing such person to purchase products or otherwise benefit the business of Seller. 02/12 8 Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
Parts List 852 Series
Parts List Effective: December 15, 2001 Supersedes: P410-852 Dated August 1996 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN
More informationParts List 800 Series
Parts List Effective: January 15, 2009 Supersedes: HY25-2800-M1/US Dated August 2004 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS
More informationParts List 870/877 Series
870/877 Series Effective: December 5, 20 WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
More informationLSHT-120A Parker Pumps Parts & Service. PHP Series Variable Volume Piston Pump Service Bulletin. Model PHP40 **** 10. Hydraulics
Hydraulics Bulletin PM 1638-10-M1/USA LSHT-120A Parker Pumps Parts & Service Effective November 30,1992 Effective: November 1999 PHP Series Variable Volume Piston Pump Service Bulletin WARNING FAILURE
More informationLSHT-120A Parker Pumps Parts & Service. PVP Series Variable Volume Piston Pump Service Bulletin. Model PVP16 **** 12. Hydraulics
Hydraulics Bulletin PM 1620-12-M1/USA LSHT-120A Parker Pumps Parts & Service Effective November 30,1992 Revised: May 1998 PVP Series Variable Volume Piston Pump Service Bulletin WARNING FAILURE OR IMPROPER
More informationParts List 867 Series
Parts List Effective: May 15, 2006 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
More informationRising Stem Plug Valves (PV Series) Catalog 4110-PV Revised, May 2004
Rising Stem (PV Series) Catalog 4110-PV Revised, May 2004 PV Series Rising Stem Introduction Parker Rising Plug and Gauge/Root Valves are available with a variety of seat and seal materials. They are screwed
More informationMaintenance Instructions & Parts List
Maintenance Instructions Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When Ordering Spare Parts. The PTR/LTR Series Actuators will provide superior performance
More informationParts List 348 Series
Effective: November 15, 2013 WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
More informationSwing-Out Ball Valves (SWB Series) Catalog 4125-SWB Revised, April 2004
Swing-Out Ball Valves (SWB Series) Catalog 4125-SWB Revised, April 2004 SWB Series Ball Valves Introduction Parker s three-piece SWB Series Ball Valves are durable valves that can handle the pressure and
More informationStratoflex Non-Latching Automatic Self-Sealing Couplings for the Aerospace Industry
Stratoflex Non-Latching Automatic Self-Sealing Couplings for the Aerospace Industry Catalog 106-NONLAT August 1999 The World Standard ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS
More informationBankable Control Valves BV06 BVB06 BVCS10 BV10 BV18
Service Bulletin Bankable Control Valves BV06 BVB06 BVCS10 BV10 BV18 Effective: June 01, 2006 Supersedes: Bull. 3123-M1/USA, 10/13/1995 06 BV06...1 BV06 Single P.O. Check...2 BV06 Dual P.O. Check...2 BV06
More informationIn (2) Out (1) Dimensions Millimeters (Inches) 31.8 (1.35) 7.9 (.31) 31.8 (1.25) (2) DL Size Manual Poppet Valve
Catalog HY15-3501/US Information General Description 2-Way Poppet Valve. The DL101 Series are suited for emergency lowering applications and onoff flow applications. Operation The DL101 Series are mechanically
More informationThe following STANDARD TERMS AND CONDITIONS shall apply to all sales of Products by Bailey.
The following STANDARD TERMS AND CONDITIONS shall apply to all sales of Products by Bailey. 1. DEFINITIONS. (a) "Bailey" includes Bailey International LLC, Bailey Manufacturing, LP, Maxim Hydraulics Private
More informationParts List 247 Series
Parts List Effective: June 15, 2008 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
More informationParts List 245 Series
Parts List Effective: March 15, 2003 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
More informationHomewood Products Corporation, Selling Policy 100 Pittsburgh, PA USA Terms and Conditions of Sale
Homewood Products Corporation Selling Policy 100 Pittsburgh, PA USA15206 June 1, 2017 Terms and Conditions of Sale Products and Renewal Parts Domestic Sales Terms and Conditions of Sale Homewood Products
More informationMSD Series Modular Membrane Air Dryers. Catalog 9CW-DX-233-1
Modular Membrane Air Dryers Catalog 9CW-DX-233-1 ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
More informationUnited Silicon Carbide, inc. Standard Terms and Conditions of Sale
United Silicon Carbide, inc. Standard Terms and Conditions of Sale 1. APPLICABILITY. These terms and conditions (these Terms and Conditions ) shall apply to all sales by United Silicon Carbide, inc. (
More informationMetric Fitting Expansion Catalog Supplement September
Metric Fitting Expansion 4300 Catalog Supplement September 2015 Metric Fitting Expansion Supplement WARNING FAIURE OR IMPROPER SEECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR
More informationG&D NORTH AMERICA, INC. 1. TERMS & CONDITIONS OF SALE
G&D NORTH AMERICA, INC. 1. TERMS & CONDITIONS OF SALE 2. General. These terms and conditions (the Terms ), together with those contained in any proposal or quotation (a Proposal ) of G&D North America,
More informationAUTOTOOL, INC. TERMS AND CONDITIONS OF SALE
AUTOTOOL, INC. TERMS AND CONDITIONS OF SALE The following terms and conditions of sale as they appear at www.autotoolinc.com at the time of sale (the Terms and Conditions ) govern the sale of all materials,
More informationAmpco Pumps Company LF Series Manual M-034 Rev A 01.17
(13) (11) (12) (11) (2) (1) (10) (1) 4. Install the wave spring (6) on the inside surface of the seal driver (8) with the open slot of the spring facing inward. 5. Place the back-up ring (5) on the inside
More informationACTIVE EVACUATION SYSTEM (AES) OPERATIONS MANUAL
ACTIVE EVACUATION SYSTEM (AES) OPERATIONS MANUAL N7 W22025 Johnson Road, Suite A Waukesha, Wisconsin 53186 Phone (262)-513-8500 Fax (262)-513-9069 1-888-745-6562 (U.S. Only) www.surgivet.com V7300i.doc
More informationTERMS AND CONDITIONS OF SALE
TERMS AND CONDITIONS OF SALE These terms and conditions govern the sale of products ( Products ) by Feelux Lighting, Inc. ( Seller ) and the purchase of Products by the customer ("Customer"). These Terms
More informationSTANDARD TERMS AND CONDITIONS
STANDARD TERMS AND CONDITIONS MODA LLC ( MODA LIGHT ) hereby gives notice of its exception to any revised or additional terms and conditions other than as stated herein and these Terms and Conditions supersede
More informationModel QTS-5. QTS Industrial Series. Parts Manual
QTS Industrial Series Model QTS-5 Parts Manual Record of Change 101 This manual contains important safety information and must be carefully read in its entirety and understood prior to installation by
More informationParts List 523 Series
Effective: January 15, 2015 Supersedes: July 15, 2014 WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
More informationParts List 252 Series
Effective: April 15, 2013 Supersedes: HY25-2252-M1/US Dated November 15, 2012 WARNING User Responsibility FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS
More informationNEBBIOLO STANDARD TERMS & CONDITIONS OF SALE
NEBBIOLO STANDARD TERMS & CONDITIONS OF SALE 1. GENERAL These Terms and Conditions of Sale ("Terms and Conditions") and any attached exhibits [together with those terms and conditions appearing on the
More informationKULZER PURCHASE ORDER TERMS AND CONDITIONS
1. General KULZER PURCHASE ORDER TERMS AND CONDITIONS 1.1 This Purchase Agreement consists, in order of precedence, of the following: the Kulzer Purchase Order (also Order ) (typed portions control over
More informationTERMS AND CONDITIONS OF SALE (REV. 11/16)
TERMS AND CONDITIONS OF SALE (REV. 11/16) 1. Definitions. The term Arconic means Aerospace & Automotive Products, a business unit of Arconic Inc. The term Buyer means the individual, corporation or other
More informationTERMS AND CONDITIONS OF SALE ISO Process Document Z-1012 Revised September 14, 2012
TERMS AND CONDITIONS OF SALE ISO Process Document Z-1012 Revised September 14, 2012 For purposes of these Terms and Conditions of Sale, the term contract shall mean the agreement between All Weather, Inc.,
More informationVaporizing Regulators
Vaporizing Regulators Instrument / Analyzer Products Catalog 4512/USA April 2005 Vaporizing Regulators Table of Contents...3 AVR3 Series Steam Heated Pressure Reducing Regulator...5 Features...5 Specifications...5
More informationGENERAL TERMS & CONDITIONS
GENERAL TERMS & CONDITIONS 1. CONDITIONS OF SALE: The sale or supply of any products and/or services by Cimtec Automation, LLC, its subsidiaries or affiliates ( CIMTEC ) to the customer ( Buyer ) is expressly
More informationNTT Electronics AMERICA, INC. GENERAL TERMS AND CONDITIONS OF SALE
NTT Electronics AMERICA, INC. GENERAL TERMS AND CONDITIONS OF SALE The following terms and conditions (hereinafter Terms and Conditions ) apply to all quotations, purchase orders, order acknowledgements
More informationLSHT-120A Parker Pumps Parts & Service. PHP Series Variable Volume Piston Pump Service Bulletin. Model PHP1050 **** 10. Hydraulics
Hydraulics Bulletin PM 630-0-M/USA LSHT-0A Parker Pumps Parts & Service Effective November 30,99 Effective: January 999 PHP Series Variable Volume Piston Pump Service Bulletin Model PHP050 **** 0 Bulletin
More informationTERMS AND CONDITIONS OF SALE MEDICAL EQUIPMENT
FUJIFILM Medical Systems U.S.A., Inc. (Endoscopy Division) Web Version: 03 (October 10, 2013) TERMS AND CONDITIONS OF SALE MEDICAL EQUIPMENT 1. Each quotation provided by FUJIFILM Medical Systems U.S.A.,
More informationON SEMICONDUCTOR. Standard Terms and Conditions of Sale
ON SEMICONDUCTOR Standard Terms and Conditions of Sale 1. PRODUCT AND SALE TERMS. The buyer ( Buyer ) agrees to purchase, and Semiconductor Components Industries, LLC ( SCI ) and its affiliates and subsidiaries
More informationBENDIX SPICER FOUNDATION BRAKE LLC GENERAL PURCHASE ORDER TERMS AND CONDITIONS
BENDIX SPICER FOUNDATION BRAKE LLC GENERAL PURCHASE ORDER TERMS AND CONDITIONS 1. Commitment, Acceptance: For the goods herein identified, Buyer will buy only the quantities specified herein, if any, or
More informationTERMS AND CONDITIONS OF SALE
TERMS AND CONDITIONS OF SALE 1. Acceptance; Agreement. These Terms and Conditions supersede all other terms and conditions, oral or written, and all other communications between the parties suggesting
More informationTerms and Conditions of Sale of Spare Parts Kits
Terms and Conditions of Sale of Spare Parts Kits SECTION 1: STANDARD TERMS AND CONDITIONS OF SALE FOR SPARE PARTS KITS All purchases of Spare Parts Kits by Company from Zebra Technologies International,
More informationa. Article(s) Goods and/or services described on the face of the Purchase Order
TERMS AND CONDITIONS LIBERTY MUTUAL STANDARD TERMS AND CONDITIONS V. 5.0 1. DEFINITIONS a. Article(s) Goods and/or services described on the face of the Purchase Order b. Customer Liberty Mutual Insurance
More informationTERMS AND CONDITIONS OF SALE
TERMS AND CONDITIONS OF SALE 1. Acceptance; Agreement. These Terms and Conditions supersede all other terms and conditions, oral or written, and all other communications between the parties suggesting
More informationTERMS AND CONDITIONS OF PURCHASE
TERMS AND CONDITIONS OF PURCHASE 1. GENERAL: For purposes of these Terms and Conditions of Purchase, the term Talbots shall mean The Talbots, Inc. The term Order shall mean, collectively: (i) a written
More informationSolarEdge Technologies (Australia) PTY LTD.
SolarEdge Technologies (Australia) PTY LTD. 23-25 Gipps Street, Collingwood 3066, Melbourne, Australia GENERAL TERMS AND CONDITIONS 1. General. This document, entitled General Terms and Conditions (referred
More informationOMNI SYSTEMS, INC. STANDARD TERMS AND CONDITIONS OF SALE
24400 Highland Rd Richmond Heights OH 44143 216-377-5160 (Phone) http://www.omnisystem.com OMNI SYSTEMS, INC. STANDARD TERMS AND CONDITIONS OF SALE This document sets forth the terms and conditions for
More informationCARRY STAINLESS STEEL SUBMERSIBLE TURBINE PUMP CP06 SERIES - 3 PHASE OWNERS MANUAL
CARRY STAINLESS STEEL SUBMERSIBLE TURBINE PUMP CP06 SERIES - 3 PHASE OWNERS MANUAL CP06 SERIES - 3 PHASE HIGH VOLUME STAINLESS STEEL VERTICAL TURBINE SUBMERSIBLE PUMP MODEL NUMBER EXPLANATION 2019 MODEL
More informationSTRATEDGE CORPORATION TERMS AND AGREEMENT OF SALE
STRATEDGE CORPORATION TERMS AND AGREEMENT OF SALE StratEdge Corporation and Purchaser hereby agree to the following terms and conditions: 1) CONTROLLING DOCUMENT The acceptance by StratEdge Corporation
More informationMODIFICATIONS OR AMENDMENTS:
1. GENERAL: These terms and conditions ("Terms") shall be applicable to any accompanying purchase order received by you ("Supplier") from Advanced Engineering, Inc. ("Purchaser"). The term "Goods and Services"
More informationUnited Tool & Mold, Inc. Jungwoo USA, LLC Terms and Conditions of Sale
United Tool & Mold, Inc. Jungwoo USA, LLC Terms and Conditions of Sale Unless United Tool & Mold, Inc. or Jungwoo USA, LLC (as the case may be, we or similar references) has entered into a written agreement
More informationINTERNATIONAL BRASS BALL VALVES
Figure 161N, 171S INTERNATIONAL BRASS BALL VALVES Price Sheet IBV-5.17 Effective: May 1, 2017 Cancels Price Sheet IBV-2.15 of February 2, 2015 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL
More informationIMPORT CAST IRON THREADED FITTINGS
IMPORT CAST IRON THREADED FITTINGS Price Sheet SPF.CI-4.15C Effective April 6, 2015 Cancels Price Sheet SPF.CI-1.15C of January 5, 2015 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS,
More informationCustomer s control including, but not limited to, names, telephone numbers and addresses.
These of Sale and Service (collectively, the Terms ) and the accompanying Quotation govern the sale of Products and Support and the license of Software by TEGAM, Inc. and its subsidiaries (collectively,
More informationTerms & Conditions of Sale North America
Terms & Conditions of Sale North America 1. Acceptance. Magnaflux, a division of Illinois Tool Works Inc., is herein referred to as Magnaflux, and the customer purchasing products ( Products ) or services
More informationHP TERMS AND CONDITIONS OF SALE AND SERVICE
HP TERMS AND CONDITIONS OF SALE AND SERVICE HP's sale of Products and Support and HP's license of Software are governed by these HP Terms and Conditions of Sale and Service. 1. DEFINITIONS a) "Exhibits"
More informationACCOUNT OPENING AGREEMENT AND CREDIT APPLICATION
Retail Information Services FULL COMPANY LEGAL NAME: DIVISION NAME: BILLING ADDRESS: ACCOUNT OPENING AGREEMENT AND CREDIT APPLICATION PLEASE SIGN AND COMPLETE ENTIRE APPLICATION ACCOUNTS PAYABLE CONTACT
More informationFleetPride, Inc. Standard Terms and Conditions of Purchase
FleetPride, Inc. 1. Terms of Agreement: The following terms and conditions of sale (these Standard Terms and Conditions ) contain general provisions applicable to all FleetPride, Inc. ( FleetPride ) supply
More informationTERMS AND CONDITIONS
TERMS AND CONDITIONS 1. ENTIRE AGREEMENT. This Quotation ("Quotation"), including all of the terms and provisions set forth on both sides hereof, constitutes the entire agreement between Buyer, as identified
More informationSTANDARD TERMS AND CONDITIONS FOR THE SALE OF GOODS ALL MARKETS EXCEPT OIL AND GAS
STANDARD TERMS AND CONDITIONS FOR THE SALE OF GOODS ALL MARKETS EXCEPT OIL AND GAS 1. Scope of Application These terms and conditions of sale ( T&C ) apply to all sales by our company ( Supplier ) of goods
More informationDiesel Rx Diaphragm Fuel Pressure Regulator
CAUTION! There are many ways to which this regulator can be mounted in conjunction with a fuel system. The user must have detailed knowledge of fuel systems to perform this installation. While performing
More informationAdilyfe Pty Ltd 1046A Dandenong Road Carnegie VIC 3163 Australia TERMS AND CONDITIONS OF SALE
Adilyfe Pty Ltd TERMS AND CONDITIONS OF SALE ACCEPTANCE These Terms and Conditions of Sale (this Contract ) shall govern all orders for the purchase of products from ADILYFE Pty Ltd. or its affiliates
More informationCylindrical Proximity Sensor E2GN
Cylindrical Proximity Sensor E2GN High quality at exceptional cost M12 and M18 models with standard sensing range. Ordering Information Shielded Non- Shielded Size M12 M18 M12 M18 Sensing Distance 2 mm
More informationHALLIBURTON GENERAL TERMS AND CONDITIONS. HALLIBURTON Halliburton as used herein is defined as Halliburton Energy Services, Inc.
HALLIBURTON Halliburton as used herein is defined as Halliburton Energy Services, Inc. PAYMENT TYPES If Customer does not have an approved open account with Halliburton or if Customer has an approved account
More informationBulletin PM Service Parts Guide. Hydraulics. Model PAVC 100 **** 22. Effective: April, PAVC 100****22 Series Variable Volume Piston Pump
Bulletin PM340- Hydraulics Service Parts Guide Model PAVC 00 **** Effective: April, 998 PAVC 00**** Series Variable Volume Piston Pump Table of Contents Page No. Pump Cutaways..., Differential & Control
More informationCooper Heat Treating LLC Terms and Conditions of Order Effective April 2, 2013
1. DEFINITIONS - The terms defined in this paragraph shall have the meanings set forth below: 1.1. Customer means Cooper Heat Treating LLC. 1.2. Order means this written Purchase Order between Customer
More informationPg 1 of 7 SMC Terms and Conditions of Purchase Order Rev3 6/8/15
SMC, LTD. (SMC) TERMS AND CONDITIONS OF PURCHASE ORDERS 1. ACCEPTANCE SMC Purchase Orders ( Order(s) ) must be accepted in writing by SELLER by signing and promptly returning the Acknowledgment to SMC,
More informationIMS Company Terms and Conditions of Sale
IMS Company Terms and Conditions of Sale Seller s Terms and Conditions of Sale apply to all purchases made by Buyer from Seller and all Invoices, emails, packing lists, or any other method of confirming
More informationWidget, Inc. Sales Agreement
Widget, Inc. Sales Agreement Please read the agreement(s) below carefully. Widget, Inc. will accept your order only after you have accepted the terms of this sales agreement. By acknowledgement of this
More informationBELSHAW ADAMATIC BAKERY GROUP - TERMS & CONDITIONS OF PURCHASE 2/1/2015
Belshaw Adamatic Bakery Group 814 44 th Street NW Suite 103 Auburn, WA 98001 USA Tel: 206-322-5474 Fax: 206-322-5425 www.belshaw-adamatic.com BELSHAW ADAMATIC BAKERY GROUP - TERMS & CONDITIONS OF PURCHASE
More informationMan Lift Standard Terms and Conditions of Sale Page 1 of 5
Man Lift Standard Terms and Conditions of Sale Page 1 of 5 1. Definitions. Unless otherwise defined herein, all terms which appear in these Man Lift Standard Terms and Conditions of Sale in initial capital
More informationLTL IT Solutions Terms and Conditions
LTL IT Solutions Terms and Conditions 1. AGREEMENT By placing an order (via purchase order or otherwise) in connection with the quote ("Quote") provided to you, you accept the Quote and the terms and conditions
More informationTyco Electronics Singapore Pte. Ltd. ( the Company ) Standard Terms and Conditions of Sale
Tyco Electronics Singapore Pte. Ltd. ( the Company ) Standard Terms and Conditions of Sale Definition Where the context permits: Contract means the contract for the sale and purchase of the Goods as provided
More informationWorldwide General Terms and Conditions
THALES e-security Worldwide General Terms and Conditions Release: 0.2 THALES e-security INC 900 South Pine Island Road, Suite 710, Plantation, Florida 33324, U.S.A A Pennsylvania corporation THALES UK
More informationPrice List February 17, 2014
Price List February 17, 2014 Price List Certification and General Installation Certification All Ductile Iron Spooling manufactured by is made in accordance with current ANSI/AWWA- C115/A21.15 For submittals
More informationGENERAL TERMS AND CONDITIONS OF SALE
GENERAL TERMS AND CONDITIONS OF SALE 1. PRICES FACILIS prices are exclusive of taxes, shipping, and insurance. Domestic prices apply only to products purchased for use in the United States. Export prices
More informationSPF FIRE PROTECTION O-LET FITTINGS Price Sheet SPF.OLET-5.18 Effective: May 7, 2018 Cancels Price Sheet SPF.OLET-3.18 of March 5, 2018
Including Weights & Packaging SPF FIRE PROTECTION O-LET FITTINGS Price Sheet SPF.OLET-5.18 Effective: May 7, 2018 Cancels Price Sheet SPF.OLET-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT/PRICING
More informationPhilips Lumify Service Subscription Agreement
1 Philips Lumify Service Subscription Agreement IMPORTANT -- READ THESE TERMS CAREFULLY BEFORE CONFIRMING YOUR LUMIFY ORDER When you confirm your Lumify order, you acknowledge that you have read this subscription
More informationTel: Fax:
Alatas Americas Inc Houston Office 22015 South Frwy. Manvel, Texas 77578 USA Tel: +1 281 431 0707 Fax: +1 281 431 0799 Email: houston@alatas.us Web: www.alatas.com GENERAL TERMS AND CONDITIONS OF SALE
More informationE4E2. Ideal for Detecting Transparent Film, Transparent Bottles, and Clear Plastic Containers. Compact Ultrasonic Sensor. Ordering Information
Compact Sensor Ideal for Detecting Transparent Film, Transparent Bottles, and Clear Plastic Containers Compact, vertical design with built-in amplifier allows easy mounting on small conveyor lines. Detects
More informationLUTRON ASUKA CO., LTD. TERMS AND CONDITIONS OF SALE
LUTRON ASUKA CO., LTD. TERMS AND CONDITIONS OF SALE 1. Acceptance Of Orders/Terms: All orders are subject to acceptance by Lutron Asuka Co., Ltd. ("SUPPLIER") at its Coopersburg, PA headquarters. SUPPLIER
More informationFontaine Commercial Trailer. Terms and Conditions of Purchase Guide
Guide TERMS AND CONDITIONS OF PURCHASE 1. Acceptance; Agreement. These Terms and Conditions supersede all other terms and conditions, oral or written, and all other communications between the parties suggesting
More informationIMPORT CAST IRON THREADED FITTINGS Price Sheet SPF.CI Effective: October 8, 2018 Cancels Price Sheet SPF.CI-2.18 of February, 2018
THREADED FITTINGS Price Sheet SPF.CI-10.18 Effective: October 8, 2018 Cancels Price Sheet SPF.CI-2.18 of February, 2018 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
More informationPrice List August 1, 2017
Price List August 1, 2017 Cement Lined - Price List August 2017 Certification and General Installation Certification All Ductile Iron Spooling manufactured by is made in accordance with current ANSI/AWWA-
More informationTERMS AND CONDITIONS OF SALE- NU-LINE PRODUCTS
TERMS AND CONDITIONS OF SALE- NU-LINE PRODUCTS 1. Acceptance; Agreement. These Terms and Conditions supersede all other terms and conditions, oral or written, and all other communications between the parties
More informationGENERAL TERMS and CONDITIONS
GENERAL TERMS and CONDITIONS PLATYPUS TECHNOLOGIES LLC (hereinafter "PLATYPUS") agrees to sell its products under the Terms and Conditions below. 1. Acceptance Governing Provisions: By purchasing and accepting
More informationPLEASE READ THESE TERMS OF SALE VERY CAREFULLY
Terms of Sale Last updated: September 2018 PLEASE READ THESE TERMS OF SALE VERY CAREFULLY THESE TERMS OF SALE ARE LIMITED TO THOSE CONTAINED HEREIN. ANY ADDITIONAL OR DIFFERENT TERMS IN ANY FORM DELIVERED
More informationPAN OSTON PURCHASE ORDER TERMS & CONDITIONS
PAN OSTON PURCHASE ORDER TERMS & CONDITIONS 1. ACKNOWLEDGMENT AND ACCEPTANCE OF ORDER. This Order constitutes an offer that is expressly limited to the Terms and Conditions contained herein. The Terms
More informationSTANDARD TERMS AND CONDITIONS OF SALE. Everight Position Technologies Corporation
STANDARD TERMS AND CONDITIONS OF SALE Everight Position Technologies Corporation These Standard Terms and Conditions of Sale (these Terms ) govern the sale of all products (the Products ) by Everight Position
More informationUNITED STATES AND CANADA TERMS AND CONDITIONS OF SALE NOVEMBER 2006
UNITED STATES AND CANADA TERMS AND CONDITIONS OF SALE NOVEMBER 2006 1 Definitions Invoice means the invoice issued by the Supplier which described the Products purchased by the Purchaser and which includes,
More informationSTANDARD TERMS & CONDITIONS OF SALE
STANDARD TERMS & CONDITIONS OF SALE THE SALE OF PRODUCTS AND SERVICES ("PRODUCTS") BY ABACUS TECHNOLOGIES, ARE SUBJECT TO THESE TERMS AND CONDITIONS ("AGREEMENT") REGARDLESS OF OTHER OR ADDITIONAL TERMS
More informationFATIGUE TECHNOLOGY INC. PURCHASE ORDER TERMS AND CONDITIONS DATED JANUARY 4, 2006
FATIGUE TECHNOLOGY INC. PURCHASE ORDER TERMS AND CONDITIONS DATED JANUARY 4, 2006 1. CONTRACT. Fatigue Technology Inc. s, hereinafter called FTI, purchase order, or change order to a purchase order, collectively
More informationFRESENIUS KABI USA, LLC GENERAL TERMS AND CONDITIONS FOR THE SUPPLY OF GOODS AND SERVICES
FRESENIUS KABI USA, LLC GENERAL TERMS AND CONDITIONS FOR THE SUPPLY OF GOODS AND SERVICES 1. General Terms: These General Terms and Conditions shall apply to and be incorporated by this reference in all
More informationSTEEL PIPE NIPPLES WELDED
STEEL NIPPLES WELDED Price Sheet SPF.PNW-5.18 Effective: May 7, 2018 Cancels Price Sheet SPF.PNW-2.18 of February 5, 2018 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT
More informationCA Master Agreement ( MA )
CA Master Agreement ( MA ) FINAL This MA is entered into by CA Canada Company ( CA ) and customer entity ( You ) identified on the relevant Order Form and shall be effective from the date specified on
More informationPURCHASE ORDER TERMS AND CONDITIONS
PRECEDENCE If there is a conflict between these terms, the information on the face of this PO, or any attachments to the PO, the terms on the face of the PO shall take precedence over these terms, and
More information130 SERIES REPAIR PARTS INDEX
130 SERIES REPAIR PARTS INDEX NOTE! Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # A-03-208 2013 Pentair Ltd. 02/20/13 SECTION
More informationQIOPTIQ LIMITED (UK) CONDITIONS OF SALE
QIOPTIQ LIMITED (UK) CONDITIONS OF SALE 1. DEFINITIONS For the purposes of these Conditions of Sale: a) The "Company" shall mean Qioptiq Ltd. b) The "Article(s) " shall mean the products or services to
More informationMcCLOSKEY INTERNATIONAL LTD CONDITIONS OF PURCHASE.
McCLOSKEY INTERNATIONAL LTD CONDITIONS OF PURCHASE. 1. DEFINITIONS In these conditions the following expressions shall have the following meanings: 1.1.1 The Company shall mean McCloskey International,
More informationDeluxe Corporation Purchase Terms and Conditions
Deluxe Corporation Purchase Terms and Conditions The following standard purchase terms and conditions only apply to purchasing transactions (including but not limited to purchase orders) that do not have
More information