Is Now Part of To learn more about ON emiconductor, please visit our website at www.onsemi.com Please note: As part of the airchild emiconductor integration, some of the airchild orderable part numbers will need to change in order to meet ON emiconductor s system requirements. ince the ON emiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the airchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON emiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to airchild_questions@onsemi.com. ON emiconductor and the ON emiconductor logo are trademarks of emiconductor Components Industries, LLC dba ON emiconductor or its subsidiaries in the United tates and/or other countries. ON emiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON emiconductor s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. ON emiconductor reserves the right to make changes without further notice to any products herein. ON emiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON emiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON emiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON emiconductor. Typical parameters which may be provided in ON emiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON emiconductor does not convey any license under its patent rights nor the rights of others. ON emiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any DA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. hould Buyer purchase or use ON emiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON emiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON emiconductor was negligent regarding the design or manufacture of the part. ON emiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
V10100V 10 A, 100 V Ultra-Low V chottky Rectifier eatures Ultra-Low orward Voltage Drop Low Thermal Resistance Very Low Profile: Typical Height of 1.1 mm Trench chottky Technology RoH Compliant Green Molding Compound as per IEC61249 tandard Lead ree in Compliance with EU RoH 2011/65/EU Directive Ordering Information 2 1 3 Cathode 3 TO-277 Anode 1 Anode 2 eptember 2015 V10100V 10 A, 100 V Ultra-Low V chottky Rectifier Part Number Top Mark Package Packing Method V10100V V10100V TO-277 3L Tape and Reel Absolute Maximum Ratings tresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at = 25 C unless otherwise noted. ymbol Parameter Value Unit V RRM Peak Repetitive Reverse Voltage 100 V V RWM Working Peak Reverse Voltage 100 V V RM RM Reverse Voltage 70 V V R DC Blocking Voltage 100 V I (AV) Average Rectified Peak orward urge Current 10 A I M Non-Repetitive Peak orward urge Current 180 A T J Operating Junction Temperature Range -55 to +150 C T TG torage Temperature Range -55 to +150 C 2015 airchild emiconductor Corporation www.fairchildsemi.com V10100V Rev. 1.2
Thermal Characteristics (1) Values are at = 25 C unless otherwise noted. ymbol Parameter Minimum Land Pattern Maximum Land Pattern R θja Junction-to-Ambient Thermal Resistance 100 40 C/W ψ JL Junction-to-Lead Thermal Characteristics, Thermocouple oldered to Anode Junction-to-Lead Thermal Characteristics, Thermocouple oldered to Cathode 15 12 6 5 Note: 1. The thermal resistances (R θja & ψ JL ) are characterized with device mounted on the following R4 printed circuit boards, as shown in igure 1 and igure 2. PCB size: 76.2 x 114.3 mm. Minimum land pattern size: 4.9 x 4.8 mm (big pattern, x1), 1.4 x 1.52 mm (small pattern, x2). Maximum land pattern size: 30 x 30 mm (pattern, x2). orce line trace size = 55 mils, sense line trace size = 4 mils. Unit C/W V10100V 10 A, 100 V Ultra-Low V chottky Rectifier igure 1. Minimum Land Pattern of 2 oz Copper igure 2. Maximum Land Pattern of 2 oz Copper Electrical Characteristics Values are at = 25 C unless otherwise noted. ymbol Parameter Conditions Min. Typ. Max. Unit BV R Breakdown Voltage I R = 0.5 ma 100 V I = 5 A 0.513 V orward Voltage Drop I = 5 A, = 125 C 0.463 I = 10 A 0.625 0.670 V I = 10 A, = 125 C 0.575 0.600 V R = 70 V 0.0072 I R Reverse Current V R = 70 V, = 125 C 6.486 V R = 100 V 0.0165 0.060 ma V R = 100 V, = 125 C 16.72 20 C J Junction Capacitance V R = 4 V, f = 1 MHz 796 p T rr Reverse Recovery Time I = 0.5 A, I R = 1 A, I rr = 0.25 A 22.94 ns 2015 airchild emiconductor Corporation www.fairchildsemi.com V10100V Rev. 1.2 2
Typical Performance Characteristics Reverse Current, I R [ma] Junction Capacitance, C J [p] 100 10 1 0.1 0.01 1E-3 1E-4 = -55 o C 1E-5 10 20 30 40 50 60 70 80 90 100 10000 = 125 o C = 75 o C = 25 o C =150 o C igure 3. Typical Reverse Characteristics 1000 100 Reverse Voltage, V R [V] 10 0.1 1 10 100 Reverse Voltage, V R [V] orward Voltage, V [V] Peak orward urge Current [A] 0.7 0.6 0.5 0.4 0.3 0.2 0.1 = 25 o C = 150 o C = -55 o C = 125 o C = 75 o C 0.0 0.01 0.1 1 10 orward Current, I [A] igure 4. Typical orward Characteristics 250 200 150 100 50 0 1 10 100 Number of Cycles V10100V 10 A, 100 V Ultra-Low V chottky Rectifier igure 5. Typical Junction Capacitance igure 6. Maximum Non-repetitive Peak orward urge Current 12 Average orward Current, I [A] 10 8 6 4 2 (3cm x 3cm Pad) T L (Cathode, 3cm x 3cm Pad) 0 0 25 50 75 100 125 150 175 Ambient / Lead Temperature, [ o C] igure 7. orward Current Derating Curve 2015 airchild emiconductor Corporation www.fairchildsemi.com V10100V Rev. 1.2 3
A B 6.65 6.35 6.15 5.67 1.40 1.10 (2X) 4.65 MIN 1.45 MIN D EATING PLANE 0.01 D 4.63 4.25 C 4.15 3.25 2.25 1.95 (0.25) TOP VIEW (0.35) 1.20 1.00 RONT VIEW D 4.90 4.23 0.913 3.680 BOTTOM VIEW 2.20 2.00 0.63 0.43 (2X) 1.25 0.90 0.40 0.23 4.15 MIN 1.00 2.75 1.97 1.15 MIN LAND PATTERN RECOMMENDATION NOTE: UNLE OTHERWIE PECIIED A. PACKAGE REERENCE: JEDEC TO-277 B. DIMENION ARE EXCLUIVE O BURR, MOLD LAH, AND TIE BAR EXTRUION. C. ALL DIMENION ARE IN MILLIMETER. D DOE NOT COMPLY TO JEDEC TANDARD VALUE. E. DRAWING ILENAME: MKT-TO277A03rev5 0.60 DAP OPTION 4.75 MAX BOTTOM VIEW - DAP OPTION
ON emiconductor and are trademarks of emiconductor Components Industries, LLC dba ON emiconductor or its subsidiaries in the United tates and/or other countries. ON emiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON emiconductor s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent Marking.pdf. ON emiconductor reserves the right to make changes without further notice to any products herein. ON emiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON emiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON emiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON emiconductor. Typical parameters which may be provided in ON emiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. ON emiconductor does not convey any license under its patent rights nor the rights of others. ON emiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any DA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. hould Buyer purchase or use ON emiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON emiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON emiconductor was negligent regarding the design or manufacture of the part. ON emiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INORMATION LITERATURE ULILLMENT: Literature Distribution Center for ON emiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 UA Phone: 303 675 2175 or 800 344 3860 Toll ree UA/Canada ax: 303 675 2176 or 800 344 3867 Toll ree UA/Canada Email: orderlit@onsemi.com emiconductor Components Industries, LLC N. American Technical upport: 800 282 9855 Toll ree UA/Canada Europe, Middle East and Africa Technical upport: Phone: 421 33 790 2910 Japan Customer ocus Center Phone: 81 3 5817 1050 www.onsemi.com 1 ON emiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit or additional information, please contact your local ales Representative www.onsemi.com