Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 0-Feb-7 Document Number: 000
PowerPAK MLP55-3L Case Outline Package Information 5 6 Pin dot by marking 2 x 0.0 C B A D 2 x 0.0 C A 0.0 C A A A2 F F2 D2-5 K7 K4 D2-4 E2-4 K2 K D2-3 K K E MLP55-3L (5 mm x 5 mm) 0.0 m C A B E2-3 E2- (Nd-) xe ref. B 4 b e E2-2 Top view C Side view L K3 K0 K5 K6 6 5 K2 D2-3 D2-2 (Nd-) x e ref. Bottom view K DIM. MILLIMETERS INCHES MIN. NOM. MAX. MIN. NOM. MAX. A () 0.70 0.0 0.027 0.02 0.03 A 0.00-0.05 0.000-0.002 A2 0.20 ref. 0.00 ref. b (4) 0.20 0.25 0 0.00 0.00 0.02 D 4.0 5.00 5.0 0.3 0.6 0.200 e 0 BSC 0.0 BSC E 4.0 5.00 5.0 0.3 0.6 0.200 L 5 0 5 0.03 0.05 0.07 N (3) 32 32 Nd (3) Ne (3) D2-0..03.0 0.03 0.04 0.043 D2-2 0..03.0 0.03 0.04 0.043 D2-3.7.2.7 0.074 0.076 0.07 D2-4 0 BSC 0.02 BSC D2-5.00.05.0 0.03 0.04 0.043 E2-.27.32.37 0.050 0.052 0.054 E2-2.3. 2.03 0.076 0.07 0.00 E2-3 3.75 3.0 3.2 0 2 E2-4 5 BSC 0.0 BSC F 0.20 BSC 0.00 BSC F2 0.20 BSC 0.00 BSC K 0.67 BSC 0.026 BSC K2 0.22 BSC 0.00 BSC K3.25 BSC 0.04 BSC K4 0.05 BSC 0.002 BSC K5 BSC 0.05 BSC K6 0.2 BSC 0.005 BSC Revision: -Oct-6 Document Number: 640 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
Package Information DIM. MILLIMETERS INCHES MIN. NOM. MAX. MIN. NOM. MAX. K7 0 BSC 0.06 BSC K 0 BSC 0.06 BSC K 0 BSC 0.06 BSC K0 BSC 0.033 BSC K 0 BSC 0.06 BSC K2 0 BSC 0.06 BSC ECN: T6-0644-Rev. E, -Oct-6 DWG: 6025 Notes. Use millimeters as the primary measurement 2. Dimensioning and tolerances conform to ASME Y4.5M. - 4 3. N is the number of terminals, Nd is the number of terminals in X-direction, and Ne is the number of terminals in Y-direction 4. Dimension b applies to plated terminal and is measured between 0.20 mm and 0.25 mm from terminal tip 5. The pin # identifier must be existed on the top surface of the package by using indentation mark or other feature of package body 6. Exact shape and size of this feature is optional 7. Package warpage max. 0.0 mm. Applied only for terminals Revision: -Oct-6 2 Document Number: 640 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
Recommended Land Pattern PowerPAK MLP55-3L for SiC620, SiC620A PAD Pattern Top side transparent view (not bottom view) Land pattern for MLP55-3L (E2-2).32 (e) (D2-) 3.03 (E3) 5 (D2-4) 3.4 (D2-5).05 (D3) (K2) 0.22 (K) 0.67 (E2-) 4.2 5 5.42 3.3 3 5.6 2.02.75.35 7.5 3 3.5 (E2-3). (L) (D2-2) (D2-3) 5.03.2 (b) 0.25 6 (L) 5 2.0 5 0.07 2.5 5 0.65 3.05 0. 5 6 0.65 All dimensions in millimeters 3 32 33 Component for MLP55-3L 33 35 Land pattern for MLP55-3L 6 5 Revision: -Jul-7 Document Number: 6644 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 0-Feb-7 Document Number: 000