C E R T I F I C A T E O F C O M P L I A N C E 20150612- R25219 Certificate Number Report Reference R25219-20110920 Issue Date 2015-JUNE-12 Issued to: SECURITRON MAGNALOCK CORP 10027 S 51ST ST PHOENIX AZ 85044 This is to certify that representative samples of ACCESSORIES FOR WINDSTORM-RATED SWINGING DOORS See next page for Models Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: See next page for Standards See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Page 1 of 3
C E R T I F I C A T E O F C O M P L I A N C E 20150612- R25219 Certificate Number Report Reference R25219-20110920 Issue Date 2015-JUNE-12 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. PRODUCT COVERED: Multiple types and designs of accessories for windstorm-rated swinging doors for use with doors Classified as Exterior Swinging Doors under the Windstorm Rated Building Products category in the UL Building Materials Directory. The models, types and ratings are shown in the table below: Model For Use with Component Type Wall Type Max Door Opening Size (ft-) Max Design Pressure (psf) Max Impact Energy Resistance (ft-lbs) Test Method(s)* Power transfer unit CEPT, SEPT, ICPT, ICPT-R wood stud, 4 ft - 0 by 8 ft - 0 +150, -150 350 ALL* EPT wood stud 3 ft - 0 by 7 ft - 0 +/-60 350 ALL* EPTL wood stud 3 ft - 0 by 7 ft - 0 +/-60 350 ALL* ALL* - SDI-BHMA A250.13,ASTM E330,ASTM E1886,ASTM E1996,TAS 201,TAS 202,. STANDARDS: Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies, ANSI/SDI-BHMA A250.13 Impact Test Procedures, TAS 201 Criteria for Testing Impact and Non Impact Resistant Building Envelope Components Using Uniform Static Air Pressure, TAS 202 Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Page 2 of 3
C E R T I F I C A T E O F C O M P L I A N C E 20150612- R25219 Certificate Number Report Reference R25219-20110920 Issue Date 2015-JUNE-12 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Criteria for Testing Products Subject to Cyclic Wind Pressure Loading, Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference, ANSI/ASTM E330-2002 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials, ANSI/ASTM E1886-2005 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes, ASTM E1996-2009 Bruce Mahrenholz, Assistant Chief Engineer, Global Inspection and Field Services Page 3 of 3
Certificate Number 20150929-R21028 Report Reference R21028 Issue Date 2015-September-29 Issued to: Securitron Magnalock Corp. 10027 S 51 st St Phoenix, AZ 85044 USA This is to certify that representative samples of Miscellaneous Fire Door Accessories, Positive-pressure Tested Miscellaneous Fire Door Accessories Certified for Canada Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: ANSI/UL 10C, "Positive Pressure Fire Tests of Door Assemblies." CAN/ULC-S104, "Standard Method for Fire Tests of Door Assemblies." See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Classification Mark for the U.S. and Canada should be considered as being covered by UL's Classification and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements. The UL Classification Mark includes: the UL in a circle symbol: with the word CLASSIFIED (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of UL s evaluation of the product; and the product category name (product identity) as indicated in the appropriate UL Directory. The UL Classification Mark for Canada includes: the UL Classification Mark for Canada: with the word CLASSIFIED (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of UL s evaluation of the product; and the product category name (product identity) in English, French, or English/French as indicated in the appropriate UL Directory. Look for the UL Classification Mark on the product. William R. Carney, Director, North American Certification Programs Page 1 of 2
Certificate Number 20150929-R21028 Report Reference R21028 Issue Date 2015-September-29 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Power transfer units, Models EPT, EPTL, EL-EPT, EL-EPTL, EPT-SC, EPTL-SC, EL-EPT-SC, EL-EPTL-SC may be prefixed with "FA". Models CEPT-10, EL-CEPT, CEPT-C5E. Models SEPT, SEPT-10, EL-SEPT, SEPT-C5E, SEPT-SC, EL-SEPT-SC. Power transfer units, Models ICPT and ICPT-R. William R. Carney, Director, North American Certification Programs Page 2 of 2
Certificate Number 20151218-R25219 Report Reference R25219 Issue Date 2015-December-18 Issued to: Securitron Magnalock Corp. 10027 S 51 st St Phoenix, AZ 85044 USA This is to certify that representative samples of Accessories for Windstorm-rated Swinging Doors Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: ANSI/SDI-BHMA A250.13, "Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies." See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Look for the UL Certification Mark on the product. Bruce Mahrenholz, Director North American Certification Program contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ Page 1 of 2
Certificate Number 20151218-R25219 Report Reference R25219 Issue Date 2015-December-18 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Model For Use with Component Type Wall Type Max Door Opening Size (ft-) Max Design Pressure (psf) Max Impact Energy Resistance (ft-lbs) Test Method(s)* Power transfer unit CEPT wood stud, 4 ft - 0 by 8 ft - 0 +150, -150 350 SDI-BHMA A250.13, ASTM ICPT, ICPT-R wood stud, 4 ft - 0 by 8 ft - 0 +/-150 350 SDI-BHMA A250.13, ASTM SEPT wood stud, 4 ft - 0 by 8 ft - 0 +/-150 350 SDI-BHMA A250.13, ASTM EPT wood stud 3 ft - 0 by 7 ft - 0 +/-60 350 SDI-BHMA A250.13, ASTM EPTL wood stud 3 ft - 0 by 7 ft - 0 +/-60 350 SDI-BHMA A250.13, ASTM (+) Positive load applied to outdoor (exterior) side of assembly; (-) negative load applied to indoor (interior) side of assembly Bruce Mahrenholz, Director North American Certification Program contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/ Page 2 of 2