List: CPVCFIPN0102171 Effective: January 2, 2017 Supercedes: January 4, 2016 TM PRICE LIST Applicable Standards NSF 61 ASTM F 437 ASTM F 439 ASTM F 1970 Corzan CPVC Schedule 80 s IPEX Inc. Canadian Customer Service Centres Vancouver, BC (604) 534-8631 FAX (604) 534-7616 Calgary, AB (403) 236-8333 FAX (403) 279-8443 Edmonton, AB (780) 415-5300 FAX (780) 415-5358 Saskatoon, SK (306) 933-4664 FAX (306) 934-2020 Winnipeg, MB (204) 633-3111 FAX (204) 633-3075 Toronto, ON (905) 670-7676 FAX (905) 670-5295 Montreal, QC (514) 337-2624 FAX (514) 337-7886 Saint John, NB (506) 633-7473 FAX (506) 633-8720 St. John's, NL (709) 747-7473 FAX (709) 368-9111 Toll free in Canada: (866) 473-9462 www.ipexna.com
Class Codes Corzan CPVC Schedule 80 Discount Code 59DF 59DK 59SS 59DG 59DL 59DH Product Description Corzan Schedule 80 CPVC Pressure s Through 8" Corzan Schedule 80 CPVC Molded s 10" & 12" Corzan Schedule 80 CPVC SS Reinforced s Corzan Schedule 80 CPVC Fabricated Pressure s Corzan CPVC Nipples Corzan CPVC Fabricated Expansion joints Product Listing Discount Multiplier Adapters 8, 9, 10 Bushings 6, 7, 8 Caps 9 Couplings 5 Crosses 4 Elbows 3, 4 Expansion Joints 15 Flanges 11, 12 Nipples 13, 14 Plugs 10 Tees 2 Unions 10 Wyes 11 Soc Spig Ft Mt * Fabricated fitting Legend Solvent Weld Socket Spigot or plain end Female iron pipe thread Male iron pipe thread Molded, 150 psi max. working pressure, non-shock @ 23 0 C (73 0 F) Note: Product codes not indicated can be provided by IPEX at time of order. Corzan is a registered trademark of the Lubrizol Corporation. Viton is a registered trademark of DuPont Dow Elastomers.
Tee Soc x Soc x Soc Size Product Carton Class 1/4 6 059479 25 59DF $ 21.20 3/8 9 059480 25 59DF $ 21.20 1/2 12 059481 20 59DF $ 21.20 3/4 20 059482 15 59DF $ 21.50 1 25 059483 15 59DF $ 26.30 1 1/4 32 059484 10 59DF $ 55.10 1 1/2 40 059485 10 59DF $ 63.00 2 50 059486 10 59DF $ 70.20 2 1/2 65 059487 10 59DF $ 177.00 3 75 059488 5 59DF $ 177.00 4 100 059489 5 59DF $ 238.00 6 150 059490 4 59DF $ 617.00 8 200 059491 2 59DF $ 1,766.00 10 250 059062 1 59DK $ 4,385.00 12 300 059084 1 59DK $ 6,777.00 Tee Soc x Soc x Ft 1/2 12 059942 20 59DF $ 53.20 3/4 20 059943 15 59DF $ 70.90 1 25 059518 15 59DF $ 88.50 Tee Ft x Ft x Ft 1/4 6 059507 25 59DF $ 46.60 3/8 9 059508 25 59DF $ 46.60 1/2 12 059509 25 59DF $ 46.60 3/4 20 059510 15 59DF $ 67.00 1 25 059511 10 59DF $ 71.90 1 1/4 32 059512 10 59DF $ 72.70 1 1/2 40 059513 10 59DF $ 76.10 2 50 059514 10 59DF $ 84.50 2 1/2 65 059515 5 59DF $ 414.00 3 75 059516 5 59DF $ 481.00 4 100 059517 5 59DF $ 1,139.00 Reducing Tee Soc x Soc x Soc 3/4 x 3/4 x 1/2 20 x 20 x 12 059492 15 59DF $ 46.80 1 x 1 x 1/2 25 x 25 x 12 059493 15 59DF $ 54.00 1 x 1 x 3/4 25 x 25 x 20 059494 15 59DF $ 54.00 1 1/4 x 1 x 1 1/4 32 x 32 x 25 059495 15 59DF $ 66.80 1 1/2 x 1 1/2 x 3/4 40 x 40 x 20 059496 15 59DF $ 110.00 11/2 x 1 1/2 x 1 40 x 40 x 25 059497 10 59DF $ 110.00 2 x 2 x 1/2 50 x 50 x 12 059498 10 59DF $ 131.00 2 x 2 x 3/4 50 x 50 x 20 059499 10 59DF $ 131.00 2 x 2 x 1 50 x 50 x 25 059500 10 59DF $ 131.00 2 x 2 x 1 1/2 50 x 50 x 40 059501 10 59DF $ 131.00 3 x 3 x 2 75 x 75 x 50 059502 5 59DF $ 266.00 4 x 4 x 2 100 x 100 x 50 059504 5 59DF $ 338.00 4 x 4 x 3 100 x 100 x 75 059505 5 59DF $ 338.00 6 x 6 x 4 150 x 150 x 100 059506 4 59DF $ 951.00 8 x 8 x 6 200 x 200 x 150 059567 2 59DF $ 1,744.00 2
90º Elbow Soc x Soc Size Product Carton Class 1/4 6 059192 25 59DF $ 23.10 3/8 9 059193 20 59DF $ 23.10 1/2 12 059194 45 59DF $ 9.20 3/4 20 059195 20 59DF $ 11.50 1 25 059196 10 59DF $ 18.40 1 1/4 32 059197 10 59DF $ 39.20 1 1/2 40 059198 15 59DF $ 43.80 2 50 059199 15 59DF $ 52.90 2 1/2 65 059200 5 59DF $ 122.00 3 75 059201 5 59DF $ 137.00 4 100 059202 5 59DF $ 246.00 6 150 059203 5 59DF $ 496.00 8 200 059204 2 59DF $ 1,212.00 10 250 059085 1 59DK $ 4,066.00 12 300 059086 1 59DK $ 5,501.00 90º Elbow Ft x Ft 1/4 6 059206 25 59DF $ 24.10 3/8 9 059207 25 59DF $ 24.10 1/2 12 059208 45 59DF $ 14.10 3/4 20 059209 15 59DF $ 21.10 1 25 059210 10 59DF $ 29.50 1 1/4 32 059211 10 59DF $ 56.10 1 1/2 40 059212 10 59DF $ 60.50 2 50 059213 10 59DF $ 81.00 2 1/2 65 059214 5 59DF $ 251.00 3 75 059215 5 59DF $ 268.00 4 100 059216 5 59DF $ 420.00 90º Elbow Soc x Ft 1/2 12 059187 15 59DF $ 23.80 3/4 20 059941 20 59DF $ 27.70 1 25 059188 10 59DF $ 36.30 1 1/4 32 059189 10 59DF $ 53.20 1 1/2 40 059190 10 59DF $ 80.30 2 50 059191 10 59DF $ 103.00 45º Elbow Soc x Soc 1/4 6 059162 25 59DF $ 34.10 3/8 9 059163 25 59DF $ 34.10 1/2 12 059164 40 59DF $ 11.20 3/4 20 059165 30 59DF $ 16.00 1 25 059166 15 59DF $ 25.30 1 1/4 32 059167 10 59DF $ 49.20 1 1/2 40 059168 20 59DF $ 50.60 2 50 059169 10 59DF $ 56.80 2 1/2 65 059170 5 59DF $ 115.00 3 75 059171 5 59DF $ 148.00 4 100 059172 5 59DF $ 203.00 6 150 059173 5 59DF $ 627.00 8 200 059174 2 59DF $ 1,305.00 10 250 059087 1 59DK $ 3,110.00 12 300 059088 1 59DK $ 5,469.00 3
45º Elbow Ft x Ft Size Product Carton Class 1/4 6 059176 25 59DF $ 32.00 3/8 9 059177 25 59DF $ 32.00 1/2 12 059178 30 59DF $ 30.20 3/4 20 059179 25 59DF $ 33.20 1 25 059180 20 59DF $ 36.60 1 1/4 32 059181 10 59DF $ 62.40 1 1/2 40 059182 10 59DF $ 62.40 2 50 059183 10 59DF $ 82.00 2 1/2 65 059184 5 59DF $ 155.00 4 100 059186 5 59DF $ 352.00 30º Elbow Soc x Soc 6 150 059022 5 59DF $ 765.00 22 1/2º Elbow Soc x Soc 2 50 059614 20 59DF $ 81.10 3 75 059615 5 59DF $ 106.00 4 100 059616 4 59DF $ 159.00 11 1/4º Elbow Soc x Soc 2 50 059617 10 59DF $ 51.20 3 75 059618 10 59DF $ 153.00 4 100 059619 4 59DF $ 186.00 Cross Soc x Soc x Soc x Soc 1/2 12 059154 50 59DF $ 91.50 3/4 20 059155 50 59DF $ 93.90 1 25 059156 50 59DF $ 104.00 1 1/4 32 059157 25 59DF $ 111.00 1 1/2 40 059158 25 59DF $ 122.00 2 50 059159 10 59DF $ 156.00 2 1/2 65 059018 1 59DF $ 209.00 3 75 059160 10 59DF $ 266.00 4 100 059161 3 59DF $ 474.00 4
Coupling Soc x Soc Size Product Carton Class 1/4 6 059130 25 59DF $ 24.30 3/8 9 059131 25 59DF $ 24.30 1/2 12 059132 65 59DF $ 9.60 3/4 20 059133 15 59DF $ 13.50 1 25 059134 20 59DF $ 18.10 1 1/4 32 059135 10 59DF $ 26.60 1 1/2 40 059136 10 59DF $ 33.80 2 50 059137 10 59DF $ 39.00 2 1/2 65 059138 5 59DF $ 86.30 3 75 059139 5 59DF $ 94.00 4 100 059140 5 59DF $ 124.00 6 150 059141 4 59DF $ 289.00 8 200 059142 2 59DF $ 781.00 * 10 250 059033 1 59DK $ 2,173.00 * 12 300 059043 1 59DK $ 3,558.00 Coupling Ft x Ft 1/4 6 059143 25 59DF $ 30.50 3/8 9 059144 25 59DF $ 30.50 1/2 12 059145 65 59DF $ 25.30 3/4 20 059146 40 59DF $ 40.50 1 25 059147 20 59DF $ 46.00 1 1/4 32 059148 20 59DF $ 48.90 1 1/2 40 059149 15 59DF $ 52.50 2 50 059150 10 59DF $ 61.80 2 1/2 65 059151 5 59DF $ 111.00 3 75 059152 5 59DF $ 129.00 4 100 059153 5 59DF $ 262.00 Reducer Coupling Soc x Soc 3/4 x 1/2 20 x 12 059460 50 59DF $ 24.90 1 x 1/2 25 x 12 059461 10 59DF $ 35.30 1 x 3/4 25 x 20 059462 10 59DF $ 35.30 1 1/4 x 1 32 x 25 059463 10 59DF $ 80.50 1 1/2 x 3/4 40 x 20 059464 25 59DF $ 79.80 1 1/2 x 1 40 x 25 059465 10 59DF $ 79.80 1 1/2 x 1 1/4 40 x 32 059466 10 59DF $ 79.80 2 x 1 50 x 25 059467 10 59DF $ 106.00 2 x 1 1/2 50 x 40 059458 10 59DF $ 106.00 3 x 2 75 x 50 059470 5 59DF $ 242.00 4 x 2 100 x 50 059459 5 59DF $ 288.00 4 x 3 100 x 75 059472 5 59DF $ 288.00 6 x 4 150 x 100 059471 1 59DF $ 657.00 8 x 6 200 x 150 059473 2 59DF $ 1,139.00 5
Reducer Bushing Spig x Soc Size Product Carton Class 1/2 x 1/4 12 x 6 059373 50 59DF $ 19.80 1/2 x 3/8 12 x 9 059374 50 59DF $ 19.80 3/4 x 1/2 20 x 12 059375 100 59DF $ 10.30 1 x 1/2 25 x 12 059376 50 59DF $ 15.80 1 x 3/4 25 x 20 059377 50 59DF $ 15.80 1 1/4 x 1/2 32 x 12 059378 25 59DF $ 41.60 1 1/4 x 3/4 32 x 20 059379 25 59DF $ 41.60 1 1/4 x 1 32 x 25 059380 25 59DF $ 41.60 1 1/2 x 1/2 40 x 12 059381 25 59DF $ 46.90 1 1/2 x 3/4 40 x 20 059382 20 59DF $ 46.90 1 1/2 x 1 40 x 25 059383 20 59DF $ 46.90 1 1/2 x 1 1/4 40 x 32 059384 20 59DF $ 46.90 2 x 1/2 50 x 12 059385 10 59DF $ 60.50 2 x 3/4 50 x 20 059386 10 59DF $ 60.50 2 x 1 50 x 25 059387 10 59DF $ 60.50 2 x 1 1/4 50 x 32 059388 10 59DF $ 60.50 2 x 1 1/2 50 x 40 059389 10 59DF $ 60.50 2 1/2 x 2 65 x 50 059392 10 59DF $ 73.80 3 x 1 1/2 75 x 40 059393 10 59DF $ 112.00 3 x 2 75 x 50 059394 10 59DF $ 112.00 3 x 2 1/2 75 x 65 059395 10 59DF $ 112.00 4 x 2 100 x 50 059396 10 59DF $ 124.00 4 x 3 100 x 75 059397 20 59DF $ 124.00 6 x 2 150 x 50 059398 5 59DF $ 266.00 6 x 3 150 x 75 059399 10 59DF $ 266.00 6 x 4 150 x 100 059400 10 59DF $ 263.00 8 x 6 200 x 150 059401 5 59DF $ 867.00 6
Reducer Bushing Spig x Ft Size Product Carton Class 1/2 x 1/4 12 x 6 059428 50 59DF $ 21.30 1/2 x 3/8 12 x 9 059429 50 59DF $ 21.30 3/4 x 1/4 20 x 6 059430 50 59DF $ 23.80 3/4 x 1/2 20 x 12 059431 50 59DF $ 11.30 1 x 1/2 25 x 12 059432 40 59DF $ 14.20 1 x 3/4 25 x 20 059433 40 59DF $ 14.20 1 1/4 x 1/2 32 x 12 059434 25 59DF $ 44.90 1 1/4 x 3/4 32 x 20 059435 25 59DF $ 44.90 1 1/4 x 1 32 x 25 059436 25 59DF $ 44.90 1 1/2 x 1/2 40 x 12 059437 15 59DF $ 55.50 1 1/2 x 3/4 40 x 20 059438 15 59DF $ 55.50 1 1/2 x 1 40 x 25 059439 15 59DF $ 55.50 1 1/2 x 1 1/4 40 x 32 059440 15 59DF $ 55.50 2 x 1/2 50 x 12 059441 10 59DF $ 76.00 2 x 3/4 50 x 20 059442 10 59DF $ 76.00 2 x 1 50 x 25 059443 10 59DF $ 76.00 2 x 1 1/4 50 x 32 059444 10 59DF $ 76.00 2 x 1 1/2 50 x 40 059445 10 59DF $ 76.00 2 1/2 x 3/4 65 x 20 059446 10 59DF $ 122.00 2 1/2 x 1 65 x 25 059447 10 59DF $ 122.00 2 1/2 x 1 1/4 65 x 32 059448 10 59DF $ 122.00 2 1/2 x 1 1/2 65 x 40 059449 10 59DF $ 122.00 2 1/2 x 2 65 x 50 059450 10 59DF $ 122.00 3 x 1 75 x 25 059547 10 59DF $ 322.00 3 x 1 1/2 75 x 40 059451 10 59DF $ 281.00 3 x 2 75 x 50 059452 10 59DF $ 268.00 3 x 2 1/2 75 x 65 059453 10 59DF $ 271.00 4 x 2 100 x 50 059454 6 59DF $ 546.00 4 x 2 1/2 100 x 65 059640 6 59DF $ 546.00 4 x 3 100 x 75 059455 6 59DF $ 546.00 6 x 3 150 x 75 059641 5 59DF $ 1,102.00 6 x 4 150 x 100 059456 5 59DF $ 1,102.00 7
T T Bushing Mt x Ft Size Product Carton Class 3/8 x 1/4 9 x 6 059402 50 59DF $ 28.70 1/2 x 1/4 12 x 6 059403 50 59DF $ 28.70 1/2 x 3/8 12 x 9 059404 50 59DF $ 28.70 3/4 x 1/4 20 x 6 059405 50 59DF $ 31.50 3/4 x 3/8 20 x 9 059406 50 59DF $ 31.50 3/4 x 1/2 20 x 12 059407 60 59DF $ 13.70 1 x 1/4 25 x 6 059643 10 59DF $ 34.10 1 x 1/2 25 x 12 059408 50 59DF $ 23.10 1 x 3/4 25 x 20 059409 50 59DF $ 23.10 1 1/4 x 1/2 32 x 12 059410 25 59DF $ 45.30 1 1/4 x 3/4 32 x 20 059411 25 59DF $ 45.30 1 1/4 x 1 32 x 25 059412 25 59DF $ 44.90 1 1/2 x 1/2 40 x 12 059413 25 59DF $ 54.40 1 1/2 x 3/4 40 x 20 059414 20 59DF $ 54.40 1 1/2 x 1 40 x 25 059415 20 59DF $ 54.40 1 1/2 x 1 1/4 40 x 32 059416 20 59DF $ 54.00 2 x 1/2 50 x 12 059417 10 59DF $ 60.20 2 x 3/4 50 x 20 059418 10 59DF $ 60.20 2 x 1 50 x 25 059419 10 59DF $ 60.20 2 x 1 1/4 50 x 32 059420 10 59DF $ 60.20 2 x 1 1/2 50 x 40 059421 10 59DF $ 54.00 2 1/2 x 2 65 x 50 059422 10 59DF $ 144.00 3 x 1 1/2 75 x 40 059423 10 59DF $ 194.00 3 x 2 75 x 50 059424 10 59DF $ 194.00 3 x 2 1/2 75 x 65 059425 10 59DF $ 194.00 4 x 2 100 x 50 059426 6 59DF $ 332.00 4 x 3 100 x 75 059427 6 59DF $ 332.00 Male Adapter Soc x Mt 1/2 12 059286 50 59DF $ 12.50 3/4 20 059287 50 59DF $ 15.10 1 25 059288 20 59DF $ 25.30 1 1/4 32 059289 15 59DF $ 37.00 1 1/2 40 059290 10 59DF $ 50.00 2 50 059291 10 59DF $ 67.60 2 1/2 65 059292 10 59DF $ 185.00 3 75 059293 5 59DF $ 248.00 4 100 059294 5 59DF $ 417.00 Female Adapter Soc x Ft 1/4 6 059217 25 59DF $ 30.90 3/8 9 059218 25 59DF $ 30.90 1/2 12 059219 40 59DF $ 15.50 3/4 20 059220 40 59DF $ 16.30 1 25 059221 20 59DF $ 37.30 1 1/4 32 059222 10 59DF $ 38.30 1 1/2 40 059223 10 59DF $ 44.50 2 50 059224 10 59DF $ 76.50 2 1/2 65 059225 5 59DF $ 146.00 3 75 059226 5 59DF $ 300.00 4 100 059227 5 59DF $ 499.00 8
Size Product Carton Class Female Adapter Soc x Ft SS Reinforced (preferred for transitions to metal) 1/2 12 059951 25 59SS $ 19.50 3/4 20 059952 25 59SS $ 21.10 1 25 059953 25 59SS $ 47.40 1 1/4 32 059954 10 59SS $ 48.80 1 1/2 40 059955 10 59SS $ 56.60 2 50 059956 10 59SS $ 80.10 2 1/2 65 059646 5 59SS $ 200.00 3 75 059957 5 59SS $ 382.00 4 100 059958 5 59SS $ 635.00 Female Adapter Spig x Ft SS Reinforced (preferred for transitions to metal) Cap Soc Cap Ft 1/2 12 059945 50 59SS $ 20.80 3/4 20 059946 25 59SS $ 21.80 1 25 059947 50 59SS $ 48.80 1 1/4 32 059948 25 59SS $ 50.30 1 1/2 40 059949 25 59SS $ 58.50 2 50 059950 15 59SS $ 80.90 3 75 059647 5 59SS $ 387.00 4 100 059648 5 59SS $ 648.00 1/4 6 059107 25 59DF $ 16.50 3/8 9 059108 25 59DF $ 16.50 1/2 12 059109 25 59DF $ 15.10 3/4 20 059110 25 59DF $ 21.20 1 25 059111 15 59DF $ 37.10 1 1/4 32 059112 10 59DF $ 40.50 1 1/2 40 059113 10 59DF $ 40.50 2 50 059114 10 59DF $ 42.90 2 1/2 65 059115 5 59DF $ 144.00 3 75 059116 5 59DF $ 157.00 4 100 059117 5 59DF $ 159.00 6 150 059118 4 59DF $ 529.00 8 200 059029 3 59DF $ 1,603.00 1/4 6 059119 25 59DF $ 19.40 3/8 9 059120 25 59DF $ 19.40 1/2 12 059121 25 59DF $ 16.50 3/4 20 059122 25 59DF $ 27.30 1 25 059123 15 59DF $ 38.10 1 1/4 32 059124 10 59DF $ 67.30 1 1/2 40 059125 10 59DF $ 69.10 2 50 059126 10 59DF $ 99.40 2 1/2 65 059127 5 59DF $ 230.00 3 75 059128 5 59DF $ 301.00 4 100 059129 5 59DF $ 437.00 9
Plug Mt Size Product Carton Class 1/4 6 059361 50 59DF $ 15.50 3/8 9 059362 50 59DF $ 15.50 1/2 12 059363 25 59DF $ 13.50 3/4 20 059364 25 59DF $ 17.10 1 25 059365 15 59DF $ 27.80 1 1/4 32 059366 10 59DF $ 32.70 1 1/2 40 059367 10 59DF $ 34.70 2 50 059368 10 59DF $ 47.20 2 1/2 65 059369 5 59DF $ 80.00 3 75 059370 5 59DF $ 85.60 4 100 059371 5 59DF $ 99.10 Union Soc x Soc Viton O-Ring Seal Union Ft x Ft Viton O-Ring Seal 1/4 6 059519 25 59DF $ 60.80 1/2 12 059520 10 59DF $ 40.50 3/4 20 059521 10 59DF $ 42.50 1 25 059522 10 59DF $ 50.80 1 1/4 32 059523 5 59DF $ 103.00 1 1/2 40 059524 5 59DF $ 104.00 2 50 059525 5 59DF $ 173.00 3 75 059526 5 59DF $ 359.00 4 100 059550 4 59DF $ 457.00 1/4 6 059527 25 59DF $ 68.40 1/2 12 059529 10 59DF $ 43.30 3/4 20 059530 10 59DF $ 76.70 1 25 059531 10 59DF $ 105.00 1 1/4 32 059532 5 59DF $ 200.00 1 1/2 40 059533 5 59DF $ 200.00 2 50 059534 5 59DF $ 227.00 3 75 059535 5 59DF $ 639.00 4 100 059651 4 59DF $ 745.00 CPVC Tank Adapter Soc x Ft 1/2 12 059100-59DF $ 102.00 3/4 20 059101-59DF $ 122.00 1 25 059102-59DF $ 135.00 1 1/2 40 059103-59DF $ 188.00 2 50 059104-59DF $ 266.00 3 75 059105-59DF $ 466.00 4 100 059106-59DF $ 776.00 10
Wye Soc x Soc x Soc Size Product Carton Class Flange Soc Solid Style Flange Ft Solid Style 1 1/2 40 059553 20 59DF $ 68.70 2 50 059536 10 59DF $ 168.00 3 75 059537 4 59DF $ 826.00 4 100 059538 4 59DF $ 874.00 6 150 059539 3 59DF $ 1,196.00 6 x 6 x 4 150 x 150 x 100 059541 5 59DF $ 934.00 1/2" - 2" 235 psi maximum internal pressure @ 73ºF 3" or larger 150 psi maximum internal pressure @ 73ºF 1/2 12 059228 25 59DF $ 39.90 3/4 20 059229 25 59DF $ 40.80 1 25 059230 15 59DF $ 44.50 1 1/4 32 059231 15 59DF $ 54.30 1 1/2 40 059232 15 59DF $ 60.20 2 50 059233 9 59DF $ 72.80 2 1/2 65 059234 10 59DF $ 151.00 3 75 059235 9 59DF $ 157.00 4 100 059236 4 59DF $ 213.00 6 150 059238 5 59DF $ 361.00 8 200 059239 2 59DF $ 825.00 Heavy Duty Flange Soc Vanstone Style 1/2 12 059240 25 59DF $ 55.50 3/4 20 059241 25 59DF $ 67.30 1 25 059242 15 59DF $ 73.30 1 1/4 32 059243 15 59DF $ 102.00 1 1/2 40 059244 15 59DF $ 108.00 2 50 059245 10 59DF $ 110.00 2 1/2 65 059246 10 59DF $ 155.00 3 75 059247 10 59DF $ 177.00 4 100 059248 5 59DF $ 274.00 6 150 059249 5 59DF $ 475.00 1/2 12 059262 25 59DF $ 40.20 3/4 20 059263 25 59DF $ 41.00 1 25 059264 15 59DF $ 44.60 1 1/4 32 059265 15 59DF $ 54.50 1 1/2 40 059266 20 59DF $ 60.50 2 50 059267 10 59DF $ 73.10 2 1/2 65 059268 10 59DF $ 152.00 3 75 059269 10 59DF $ 158.00 4 100 059270 5 59DF $ 214.00 6 150 059271 5 59DF $ 365.00 8 200 059272 2 59DF $ 1,097.00 10 250 059273 2 59DK $ 3,563.00 12 300 059569 2 59DK $ 5,346.00 All Molded Flanges are rated at 150 psi at 73 o F., non-shock. Standard 150 lb. bolting pattern. CAUTION: When thermoplastic flanges are used with butterfly valves or other equipment, where a full face continuous support does not exist, a back-up ring or fiberglass reinforcement should be used to prevent cracking of the flange face. 11
Flange Ft Vanstone Style Size Product Carton Class 1/2 12 059656 25 59DF $ 56.00 1 25 059658 15 59DF $ 73.80 1 1/4 32 059284 15 59DF $ 102.00 1 1/2 40 059659 20 59DF $ 109.00 2 50 059660 10 59DF $ 111.00 2 1/2 65 059661 10 59DF $ 177.00 3 75 059285 10 59DF $ 177.00 4 100 059662 5 59DF $ 276.00 Flange Spigot Vanstone Style 1/2 12 059274 25 59DF $ 46.50 3/4 20 059275 25 59DF $ 49.80 1 25 059276 15 59DF $ 56.30 1 1/4 32 059277 15 59DF $ 69.70 1 1/2 40 059278 15 59DF $ 77.10 2 50 059279 10 59DF $ 108.00 2 1/2 65 059280 10 59DF $ 169.00 3 75 059281 10 59DF $ 185.00 4 100 059282 5 59DF $ 190.00 6 150 059283 4 59DF $ 414.00 8 200 059570 2 59DF $ 844.00 Flange Blind 1/2 12 059250 25 59DF $ 59.50 3/4 20 059251 25 59DF $ 64.50 1 25 059252 15 59DF $ 80.30 1 1/4 32 059253 15 59DF $ 91.00 1 1/2 40 059254 15 59DF $ 127.00 2 50 059255 10 59DF $ 133.00 2 1/2 65 059256 10 59DF $ 201.00 3 75 059257 10 59DF $ 252.00 4 100 059258 8 59DF $ 340.00 6 150 059259 5 59DF $ 569.00 8 200 059260 5 59DF $ 1,057.00 All Molded Flanges are rated at 150 psi at 73 o F., non-shock. Standard 150 lb. bolting pattern. CAUTION: When thermoplastic flanges are used with butterfly valves or other equipment, where a full face continuous support does not exist, a back-up ring or fiberglass reinforcement should be used to prevent cracking of the flange face. Full Pressure Flange Kit 2 1/2 65 059469 1 59SS $ 1,832.00 3 75 059477 1 59SS $ 2,129.00 4 100 059358 1 59SS $ 2,826.00 6 150 059359 1 59SS $ 3,772.00 Note: Kit includes one (1) Corzan socket flange-solid style. 12
Length Product Carton Class CPVC Nipples 1/4" (6mm) diameter CLOSE STANDARD close 7/8 22 059296 25 59DL $ 6.45 1 1/2 40 059306 25 59DL $ 6.88 2 50 059316 25 59DL $ 7.42 3 75 059317 25 59DL $ 8.71 4 100 059318 25 59DL $ 9.89 5 125 059319 25 59DL $ 11.10 6 150 059320 25 59DL $ 11.90 CPVC Nipples 3/8" (9mm ) diameter CLOSE STANDARD close 1 25 059551 25 59DL $ 7.20 1 1/2 40 059307 25 59DL $ 7.85 2 50 059552 25 59DL $ 8.71 3 75 059939 25 59DL $ 10.20 4 100 059554 25 59DL $ 11.40 CPVC Nipples 1/2" (12mm) diameter CLOSE STANDARD close 1 1/8 28 059297 25 59DL $ 6.88 1 1/2 40 059308 25 59DL $ 7.42 2 50 059322 25 59DL $ 8.17 3 75 059321 25 59DL $ 9.35 4 100 059324 25 59DL $ 11.10 5 125 059325 25 59DL $ 12.30 6 150 059326 25 59DL $ 13.70 CPVC Nipples 3/4" (20mm) diameter CLOSE STANDARD close 1 3/8 35 059298 25 59DL $ 8.60 1 1/2 40 059309 25 59DL $ 9.03 2 50 059327 25 59DL $ 9.89 3 75 059328 25 59DL $ 11.20 4 100 059329 25 59DL $ 12.90 5 125 059331 25 59DL $ 14.30 6 150 059332 25 59DL $ 15.80 CPVC Nipples 1" (25mm) diameter CLOSE STANDARD close 1 1/2 40 059299 25 59DL $ 10.20 2 50 059310 25 59DL $ 11.20 3 75 059333 25 59DL $ 13.70 4 100 059334 25 59DL $ 15.80 5 125 059335 25 59DL $ 18.10 6 150 059336 25 59DL $ 20.60 13
Length Product Carton Class CPVC Nipples 1 1/4" (32mm) diameter CLOSE STANDARD close 1 5/8 41 059300 25 59DL $ 12.50 2 50 059311 25 59DL $ 14.70 3 75 059338 25 59DL $ 18.10 4 100 059339 25 59DL $ 22.70 5 125 059340 25 59DL $ 26.00 6 150 059341 25 59DL $ 29.50 CPVC Nipples 1 1/2" (40mm) diameter CLOSE STANDARD close 1 3/4 45 059301 25 59DL $ 14.30 2 50 059312 25 59DL $ 15.80 3 75 059342 25 59DL $ 19.70 4 100 059343 25 59DL $ 23.80 5 125 059344 25 59DL $ 27.70 6 150 059345 25 59DL $ 31.50 CPVC Nipples 2" (50mm) diameter CLOSE STANDARD close 2 50 059302 25 59DL $ 21.90 3 75 059346 25 59DL $ 26.00 4 100 059347 25 59DL $ 30.60 5 125 059348 25 59DL $ 35.60 6 150 059349 25 59DL $ 40.30 CPVC Nipples 2 1/2" (65mm) diameter CLOSE STANDARD close 2 1/2 65 059303 25 59DL $ 39.60 6 150 059352 25 59DL $ 73.80 CPVC Nipples 3" (75mm) diameter CLOSE STANDARD close 2 5/8 67 059304 25 59DL $ 51.20 3 75 059353 25 59DL $ 51.20 4 100 059354 25 59DL $ 67.00 5 125 059355 25 59DL $ 77.40 6 150 059356 25 59DL $ 88.60 CPVC Nipples 4" (100mm) diameter CLOSE STANDARD close 2 7/8 72 059305 25 59DL $ 78.60 6 150 059357 25 59DL $ 126.00 14
Size Product Carton Class Corzan CPVC Expansion Joint 6" Travel, EPDM Corzan CPVC Expansion Joint 6" Travel, Viton Corzan CPVC Expansion Joint 12" Travel, EPDM Corzan CPVC Expansion Joint 12" Travel, Viton 1/2 12 059973 1 59DH $ 726.00 3/4 20 059975 1 59DH $ 794.00 1 25 059977 1 59DH $ 858.00 1 1/2 40 059979 1 59DH $ 983.00 2 50 059981 1 59DH $ 1,245.00 3 75 059983 1 59DH $ 1,716.00 4 100 059985 1 59DH $ 2,918.00 1/2 12 059959 1 59DH $ 805.00 3/4 20 059961 1 59DH $ 883.00 1 25 059963 1 59DH $ 953.00 1 1/2 40 059965 1 59DH $ 1,091.00 2 50 059967 1 59DH $ 1,383.00 3 75 059969 1 59DH $ 1,906.00 4 100 059971 1 59DH $ 3,242.00 1/2 12 059974 1 59DH $ 739.00 3/4 20 059976 1 59DH $ 847.00 1 25 059978 1 59DH $ 904.00 1 1/2 40 059980 1 59DH $ 1,134.00 2 50 059982 1 59DH $ 1,447.00 3 75 059984 1 59DH $ 1,761.00 4 100 059986 1 59DH $ 2,918.00 1/2 12 059960 1 59DH $ 820.00 3/4 20 059962 1 59DH $ 942.00 1 25 059964 1 59DH $ 1,004.00 1 1/2 40 059966 1 59DH $ 1,261.00 2 50 059968 1 59DH $ 1,609.00 3 75 059970 1 59DH $ 1,957.00 4 100 059972 1 59DH $ 3,242.00 15
Notes
Notes
IPEX Inc. www.ipexna.com ( Vendor ) Terms and Conditions of Sale 1. Scope All sales are subject to these general terms and conditions ( General T&C s ). In addition, certain products may be subject to product-specific terms and conditions ( Specific T&C s ) as posted on the Vendor s website at the time of sale. Purchaser s order is accepted subject to these General T&C s, to the applicable Specific T&C s and to any terms and conditions agreed to in writing by the Vendor and Purchaser. It is expressly agreed that any terms and conditions contained in the Purchaser s order or otherwise stipulated will be deemed for the Purchaser s internal use only and will not be binding on the Vendor. 2. Orders Purchaser s orders are conditional upon satisfactory credit approval by the Vendor. The Vendor will only accept orders in excess of $100 before taxes or such greater amount as may be specified for certain products. Once confirmed by the Vendor, orders for custom-made products manufactured to the Purchaser s specifications and orders for large quantities of non-inventoried products cannot be cancelled, modified or returned, except with the Vendor s written consent and upon terms which provide for indemnification of the Vendor for the costs and expenses incurred. 3. Shipments Delivery schedules stipulated in either the quotation ( Quotation ) or the order confirmation ( Order Confirmation ) are approximate only and shipment will be made within reasonable proximity thereto. Under no circumstances will the Vendor be responsible for any damage whatsoever caused by delays in shipment, whether resulting from causes within or beyond the control of the Vendor. All shipments are F.O.B. the Vendor s location per the American standard sales terminology or Ex Works per the Incoterms international rules applied to foreign trade contracts. The Vendor shall bear no liability for Products lost or damaged during transit. The Vendor may agree to different shipment terms as specified in the Quotation or in the Order Confirmation. Freight prepaid orders, when applicable, will be delivered by the carrier of the Vendor s selection, unless the use of other carriers is agreed to in writing with the Purchaser. Purchaser must verify quantities and report discrepancies within 2 business days of receipt. 4. s All prices quoted or published are F.O.B. the Vendor s location or Ex Works. Published prices are subject to change without notice until orders are accepted by the issuance of an Order Confirmation, whereupon prices will remain firm for those shipments that take place within the 30-day period following the date of the Order Confirmation. For specific projects, contracts or Quotations, the Vendor may agree in writing to protect prices for an extended period of time. order may be shipped in whole or in part at the Vendor s discretion. shipment made will be immediately invoiced. Quoted or published prices do not include any sales, use, excise or any other tax or levy imposed by any present or future law, regulation or other order, on any of the Products. The Purchaser must provide the Vendor with tax exemption certificates or other documents, as required by the specific tax jurisdiction, in order not to be charged for any of the applicable taxes. IPEX Inc. General Terms & Conditions of Sale March 2010
5. Terms of Payment Unless other terms of payment are agreed to in writing by the Vendor, payment is due upon delivery of the Products. If applicable, cash discounts, expressed as a percentage, are calculated on the net invoiced prices before any taxes, freight or other charges and can only be deducted from payment if the Vendor receives payment from Purchaser on or prior to the due date. Net 30 days means that payment is due within 30 days of the date of invoice and no cash discount is applicable. Overdue accounts shall bear interest at a rate of 18% per annum. The granting of credit by the Vendor is at all times based on its evaluation of the Purchaser s financial condition. If such financial condition does not justify continuance of shipment on credit, the Vendor may require full or partial payment in advance. 6. Title to the Goods Sold The Purchaser acknowledges and agrees that so long as the Products are in Vendor s possession, title to the Products shall remain with the Vendor until full payment therefore is received by the Vendor. The Purchaser agrees to defend, indemnify and save the Vendor harmless from any and all costs, expenses and damages arising out of any claims asserted against the Vendor pursuant to the exercise of its ownership rights or any recourse in payment of purchase price. 7. Return of Products The Vendor may accept the return of Products, subject to the following: a) prior to returning any Products, the Purchaser must obtain a Return Material Authorization (RMA) number from the Vendor, b) Products must be returned freight prepaid, unless otherwise authorized by the Vendor and c) Products must be received in good saleable condition and, if required, in full carton quantities and in their original packaging. A minimum return charge of 25% of the purchase price will be applied against any credit issued pursuant to the return of Products, except in the case of a Vendor shipping error. The Vendor may apply additional charges against the credit to cover remarketing costs or may refuse to issue any credit, but will advise the Purchaser accordingly. Certain Products, such as pressure pipe, custom-made configurations, obsolete products, excessive quantities or other specialty products cannot be returned. The Vendor may direct that Products be destroyed for credit rather than returned. 8. Changes to Products The Vendor reserves the right to make changes or improvements to its Products without assuming any further obligation. 9. Patent Rights If any claim is made against the Purchaser based on the allegation that any of the Products sold by the Vendor constitute an infringement of any U.S. or Canadian patent, the Purchaser shall notify the Vendor immediately. The Vendor shall have the right, at its own option and expenses, to take any actions to protect and defend its rights. 10. Force Majeure The Vendor shall in no event be responsible or liable for any non-performance or delay in performance hereunder or any loss or damage of any kind or nature whatsoever, direct or indirect, suffered by the Purchaser, subsequent purchasers, ultimate users of the goods or any other person, as a result of any causes beyond the reasonable control of the Vendor including, without limitation, price alterations, delay in shipments, strikes, lock-outs, fires, floods, civil commotion, riots, wars, acts of God, embargos, labor shortages, walk-outs, work slowdowns, accidents, breakdowns, delays in manufacture, transportation or delivery of goods or materials, shortages of IPEX Inc. General Terms & Conditions of Sale March 2010
materials or supplies, government acts or regulations or licensing action. 11. Governing Law This agreement and all rights and obligations hereunder shall be governed by the laws of the province of Ontario and all actions commenced pursuant hereto shall be brought in a court of competent jurisdiction residing in the province of Ontario. 12. Non-waiver No delay, failure, change or waiver by the Vendor to exercise any one or more of these terms and conditions of sale shall be construed or shall operate to be a waiver thereof or a continuing waiver of such terms and conditions. 13. Warranty and Limitation of Liability 13.1. All of the Vendor s Products are guaranteed against defects resulting from faulty workmanship or materials, subject to the limitations, exceptions, disclaimers and conditions stipulated hereunder or specified with respect to particular products and posted, updated or amended on the Vendor s website or stipulated in the product literature, 13.2. The Vendor will replace, free of charge, including shipping charges for the replacement Products, any Products which are found to be defective in workmanship or material, provided that the following conditions are met: 13.2.1. the Vendor is promptly notified in writing of such defect immediately upon discovery of same and the defective Product is promptly returned to the Vendor. Claimant must provide documentary evidence of failure, as well as the failed components or representative samples of Product(s) that are alleged to have failed and agree to inspection by the Vendor of the system in which the alleged defective Product(s) was/(were) installed. 13.2.2. the Products have not been altered or modified after leaving the Vendor s premises, have not been used in more than one installation, show no evidence of disassembly or tampering, are not and have not been subjected to abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair and the defect is not due, without limitation, to faulty installation, misalignment of Products, vibration, ordinary wear and tear, corrosion, erosion, U.V. degradation, incompatible lubricants, pastes and thread sealants, unusual pressure surges or pulsation, water hammer, temperature shocking or fouling, acts of nature such as earthquakes, fire, flood or lightning or any other event of force majeure. 13.2.3. if the Product is perishable, the Product has been used or installed prior to the expiry date printed on the Product; 13.2.4. the Products have been used in applications or under conditions that are in accordance with the technical information or literature available from the Vendor. 13.3. Limited warranty periods may apply to certain products. Where applicable, these are posted on the Vendor s website. 13.4. The Vendor disclaims any liability or responsibility: IPEX Inc. General Terms & Conditions of Sale March 2010
13.4.1. for labor, materials and/or other expenses required to replace the defective Product or to repair any damage resulting from the use thereof; 13.4.2. for the Purchaser s calculations, product drawings or engineering design specifications; 13.4.3. regarding the accuracy of any plans, drawings or specifications furnished to the purchaser as part of the sale of any of its products; 13.4.4. for loss or damage resulting from failure to abide by manufacturer s warnings, safety instructions or other precautionary guidelines. 13.5. ANY CLAIM OF LIABILITY ASSERTED AGAINST THE VENDOR WHETHER IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, WITH RESPECT TO OR ARISING OUT OF THE SALE, DELIVERY, INSTALLATION, REPAIR OR USE OF ANY PRODUCTS SOLD TO BUYER SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCTS FOUND TO BE DEFECTIVE. It is the responsibility of the owner to obtain and pay for emergency repairs. 13.6. THE VENDOR S LIABILITY IN RESPECT TO THE SALE IS STRICTLY LIMITED TO THE REPLACEMENT OF PRODUCTS AS HEREINBEFORE SPECIFIED AND THE VENDOR SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY DAMAGES WHETHER FOR THE LOSS OF USE OR BUSINESS INTERRUPTION OR ANY OTHER CLAIM FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES. THERE IS NO WARRANTY, CONDITION OR REPRESENTATION OF ANY NATURE WHATSOEVER, EXPRESSED OR IMPLIED, BY STATUTE OR OTHERWISE, EXCEPT AS HEREIN CONTAINED AND THE VENDOR DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS OF ITS PRODUCTS FOR A SPECIAL PURPOSE OR OTHER WARRANTY OF QUALITY. * * * IPEX Inc. General Terms & Conditions of Sale March 2010
IPEX Inc. Canadian Customer Service Centres Vancouver, BC 20460 Duncan Way, Langley, British Columbia V3A 7A3 (604) 534-8631 FAX (604) 534-7616 TERMS OF SALE Transport: F.O.B. Stocking Point. Calgary, AB 8460-60th Street S.E. Calgary, Alberta T2C 3C7 (403) 236-8333 FAX (403) 279-8443 Edmonton, AB 4225-92nd Avenue Edmonton, Alberta T6B 3M7 (780) 415-5300 FAX (780) 415-5358 Saskatoon, SK 611-47th Street East Saskatoon, Saskatchewan S7K 5G5 (306) 933-4664 FAX (306) 934-2020 Winnipeg, MB 2081 Logan Avenue West Winnipeg, Manitoba R2R OJ1 (204) 633-3111 FAX (204) 633-3075 Toronto, ON 6810 Invader Crescent Mississauga, Ontario L5T 2B6 (905) 670-7676 FAX (905) 670-5295 Montreal, QC 6665 chemin Saint-François Saint-Laurent, Québec H4S 1B6 (514) 337-2624 FAX (514) 337-7886 Saint John, NB P.O. Box 127, Grandview Industrial Park Saint John, New Brunswick E2L 3X8 (506) 633-7473 (PIPE) FAX (506) 633-8720 St. John's, NL P.O. Box 13247, Station A St. John's, Newfoundland A1B 4A5 (709) 747-7473 (PIPE) FAX (709) 368-9111 Toll free in Canada: (866) 473-9462 www.ipexna.com