TENDER NO GMDC/PND/SCRAP/001/14-15 SEALED TENDER IS INVITED FOR DISPOSAL OF SCRAP MATERIAL LYING AT OUR LIGNITE PROJECT, PANANDHRO, TAL. LAKHPAT, DIST. KUTCHH. ON AS IS WHERE IS BASIS: 1) Item & Quantity As mentioned in the list attached (Lot No 1,5,6,47,49& SME-63) Page no 7 2) Inspection Scrape can be available for inspection at Lignite Project,Panandhro Tal. Lakhpat, Dist. Kutch. During working hours Except holidays. Working hours, 8 AM to 4 PM : Lunch Time 12 Noon to 1 PM. Weekly Off : Sunday. (Other holidays as per Govt. Rules).Email Id: panadhro@gmdcltd.com Contract Person : Mr.A.K.Garg GM (Project) Phone No. 09727792739 3) Tender fee Rs. 500/- per Tender (Non refundable) by Cash / M.O/DD. (by hand). Rs. 700/- per Tender (by Mail). 4) EMD EMD by DD or RTGS drawn in favour of GMDC LTD payable at Panandhro Kutchh or Dayapar Kutchh. 5) Last Date & Time of issue of 22/10/2014 Upto 3.00 p.m. Tender by hand. 6) Last Date & Time of issue of Tender by Post 20/10/2014 Up to 10 a.m 7) Last date & time of Submission of tender. 28/10/2014 Upto 3.00 p.m 8) Date & Time of Opening the tender in presence of bidders. 31/10/2014 Upto 3.00 pm
Note: 1. TCS will be calculated @ 1.00% or as applicable on all items & VAT will be charged extra as applicable. 2. Service tax 12.36% or as applicable will be charged on rent charges. 3. The corporation reserves it s right to reject any OR all the tenders without assigning any reasons thereof.bidders must quote their prices against each item. 4. For quoted prices, instructions any to be strictly followed given under each groups of items. 5. Tender document can be down loaded from our Website www.gmdcltd.com. However in such case bidder has to submit tender fee Rs 500/- by demand draft drawn in favour of GMDC LTD payable at Panandhro Kutchh or Dayapar Kutchh along with tender. Name & Address of Bidder.
TENDER NO GMDC/PND/SCRAP/001/14-15 Lot No Description U.O.M. Quantity Vat % TCS on basic amount +VAT amount is charged. EMD in Rs 1 D.G.Set 1000 KVA,Make: Cummins,Model: KTA 3067G,Sr.no 25213930 NO 1 5 1 80000 5 L&T 300 CK II HYD.EXCAVATOR PROJECT MT 100 15 1 400000 Sr.No 02,GJ-12-AN-1124,TATA HITACHI EX- 400 HYD.EXCAVATOR GJ-12-AN-1119 Note: R.T.O Registration cancellation certificate obtained. 6 BEML Dozer D 155 KT 1150 C GJ 12 AN 1132 MT 60 15 1 250000 & BEML BH-35 DUMPER SR.NO 29,GJ-12-Y- 9716 Note: R.T.O Registration cancellation certificate obtained. 47 Spares for Usha Telehoist 27 items LOT 1 15 1 7000 49 Spares for Hyd.Excavator Eder 165 items LOT 1 15 1 30000 SME-63 Bucket Wheel Excavator Spares LOT 1 15 1 400000 Bidders sign and stamp:
GENERAL TERMS & CONDITIONS OF SALE 1) Material is sale on As is where is basis. 2) The corporation may increase/decrease/delete the quantity/items before delivery & may split any OR all items to one OR more parties. a) The person signing the schedule of RATE(S) will be deemed to be the only authorized representative of the bidder for any or all transactions with GMDC in connection with this Tender. His signature will be considered as authorized signature. b) All rates and prices in the tender should be both in figures and in words written in the schedule of Rate(s) Tender(s) containing overwritten or revised rates without being authenticated by bidder Signature is / are liable to be rejected. Should there be any variation between the rates indicated in figure and words, the higher of the two shall be considered. Taxes and duties will be extra as applicable. 3) Offer should accompany earnest money deposit lot wise by demand draft or through RTGS, in favour of G.M.D.C. Ltd. payable at Panandhro Kutchh or Dayapar Kutchh. Offers received without earnest money deposit/tender fee will not be considered in any case. EMD will not attract any interest charges. Bidders are advised to write or affix their rubber stamp at the back of the DD towards EMD showing the name and address of their firm / company. 4) After opening of tenders successful bidders will be informed about acceptance of their offer, by issuing offer letter. 5) After issuance of such intimation to successful tenders, they will have to obtain delivery order from stores section within 20 days time from the date of offer letter which will be issued only after payment of full value of the material / stores along with taxes/tcs / duties for which their offers has been accepted. 6).DEFAULT IN PAYMENT: In case of default in payment of the balance Sale Value within 20 days from date of Offer Letter the due payment may be made together with additional charges @ 1% per week or part thereof calculated on the Full 100% Sale Value for a minimum period of one week or multiple thereof. EMD will be adjusted towards material value only on receipt of the balance Sale Value within the prescribed time. However, this shall not confer any right to the Successful bidder to make any Late Payment of Balance Sale Value or applicable Duties and Taxes and GMDC reserves the right not to accept the payment of the Balance Sale Value with or without the additional charges after the expiry of the free payment time.
7) After issuance of delivery order s successful bidder will have to take delivery of material within 45 days time from the date of Delivery order failing which corporation may dispose off the same to any other party in any manner at the risk and cost of the successful bidder and their earnest money will be liable to be forfeited. Default in lifting materials: In case of any Default in lifting of materials by the successful bidder within the prescribed free time limit, the outstanding material may be lifted within 14 (Fourteen) Days from the due date subject to payment of Ground Rent by the successful bidder directly to the GMDC for the period of delay. Ground Rent will be payable @ 1% per week or part thereof. If successful bidder does not take delivery of the materials after issuing delivery order corporation will cancelled delivery order without intimation to the party and will forfeit 25% amount paid against tender without giving any notice as well as take action for damaged cause to the corporation. 8) Bidders should quote separately for each Lot. Offers for all lots will not be considered and will be rejected except for the items specifically mentioned in the terms & conditions. 9) The corporation reserves the right to reject any OR all the offers for one or more or all the items without assigning any reasons thereof and is not liable to the bidders for any consequent losses or damages arising there from. 10) The prospective bidders are advised to inspect the material / stores at our works site during working hrs. of stores offices before submitting their offers. 11) Any conditional offer is not binding to the corporation and is liable to be rejected. 12) The offers should reach the corporation registry department in sealed cover super scribed with the words offer for disposed off scrap and Tender No,date of opening with due earnest money/tender fee on or before 3.0 p.mof. 28/10/2014 13) Tender offers will be opened on 31/10/2014 at 3 pm. bidders can remain present at the time of opening. 14) The offer/s will be deemed to have submitted on the basis that bidder has agreed to all these terms & conditions of the tenders. 15) The decisions of the corporation in case of dispute will be binding to the bidders. 16) Validity of the tender should be not less than 60 days from the date of opening of the tender, if required by the corporation; the bidders will have to extend the validity for a further period of 30 days.
17) The tender submitted in contravention of the terms & conditions stated herein will not be considered. 18) The courts at Ahmedabad in Gujarat State only will have jurisdiction to deal with and decide any legal mater or contract between the parties hereto. 19) Documents/Certificate prescribed in Condition 20 to 24 herein below in case of those Items / Lots which comprised Hazardous Waste materials within the meaning of the Hazardous Waste (Management and Handling) Rules, 1989 These Documents Certificates should be duly attested by a Notary Public :- SALE OF HAZARDOUS WASTE ITEMS: 20) The sale of Hazardous Waste items, namely Waste Oil and specified categories of Non-Ferrous Metal Waste will be governed by Hazardous Wastes (Management & Handling) Rules, 1989 and its Amendments and the sale of Batteries will be governed by the Batteries (Management & Handling) Rules, 2001 and its Amendments. For such items, only those Parties shall be eligible to bid who have Valid Registration Certificates from the State as well as Central Pollution Control Board (PCB). 21) In case of Sale of Waste Oil & specified Non-Ferrous Metal Waste involving transport of such material to the successful bidder s Plant / Processing Unit located in a State other than Gujarat state, the successful bidder must obtain and submit 'No Objection Certificate' from the State PCB where the successful bidder's Plant / Processing Unit is located, to the Principal before taking delivery, failing which the sale will be treated as cancelled and further action will be taken by GMDC as may be deemed fit by US. 22) In case of Items other than Waste Oil, specified Categories of Non-Ferrous Metal Wastes and Batteries, which fall under the category of HAZARDOUS WASTE, the sale will be governed by the Hazardous Waste (M&H) Rules, 1989and its Amendments. 23) Party bidding for hazardous waste should have valid certificate from state as well as center pollution control board and have to submit true copy of the same along with payment made to the GMDC. Please note that delivery of hazardous materials will not be given if such certificate is not submitted to US. 24) No Lot no of this tender COVERS UNDER HAZARDOUS MATERIALS LIST.
25) Corporation reserves its right to demand copy of any other document / License / Certificate issued by any Statutory / Govt. Authority in favour of the bidder / Successful Bidder, if required, under any Statutory or State / Central Government Act / Law / Order / Rules etc. 26) The sale value including Sales Tax, Duties, TCS and other charge as applicable must be paid by Demand Draft / Pay Order drawn on any Nationalized bank in favour of GMDC Ltd., payable at Panadhro Kutchh or Dayapar Kutchh. Our Banker is Dena Bank Panadhro Kutchh and State Bank of India Dayapar Kutchh. 27) The goods will be sold on As is where is and No complaint basis in so far as physical condition of the same is concerned, The bidder(s) will therefore be deemed to have made themselves aware of the physical conditions, dimensions, size, weight, working conditions etc., by inspecting the materials before submitting their Tender and neither complaint nor any claim in this regard will be entertained by GMDC after the submission of the Tender. 28) Where the goods are sold by unit weight or unit number basis and not on the basis of Lot, the quantity indicated in such cases against the respective lots are purely indicative which in actual may turn out to be more or less than the indicated quantity. In case of actual quantity turning out to be less than the indicated quantity after due completion of the lifting by the successful bidder(s), the successful bidder(s) shall not be entitled to claim any damages, loss of interest or compensation on any other account, but shall be entitled to proportionate refund only. All bidders are advised to visit our site and see all the scrap materials physically and then quote the tender in order to avoid any confusion. 29) All taxes including VAT or other Levies entail on the transaction under any provincial, Local or Central taxes in force for the time being or enforced hereafter, having its impact on the transaction, will be to successful bidder s account and should be deposited by the successful bidders along with cost of the material. We are accepting C Form.We are accepting payment by RTGS. 30) The materials to be purchased by the successful bidder(s) shall be subject to all such Duties (including Excise Duty) as may be applicable from time to time and the same shall be borne by the successful bidder(s). 31) Whatever statutory rate of Excise Duty, Sales Tax/CST, other Levies etc. if any, is / are assessed and applicable on the date of actual removal / lifting of materials shall be paid / payable by the successful bidder(s). Any State / Central Duties and / or Taxes indicated in the Tender catalogue and / or GMDC after letter Delivery Order or any other Letter / Correspondence of GMDC will be only indicative and any error in same will not be accepted as an excuse from the successful bidder in this regard.
32) The successful bidder(s) will be responsible to comply with provisions of Central and State Excise and Sales Tax Act and concerned State and the Rules framed there under and also by the Order / Instructions issued in this behalf by the appropriate Authority. 33) In the event of dispute with regard to Excise duty and Central Excise Authorities levying and additional charges, such Duty / charges shall be payable by the successful bidder(s). Any penalty imposed by the Excise Authorities for non-observance of Excise procedure by the successful bidder(s) shall also be borne by them. 34) In case of sale of mining heavy earth moving equipment or light/heavy vehicle, delivery of vehicle will be given only after completion of RTO formalities. 35) No hot-work permission shall be allowed to the successful bidder inside the principal's stockyard premises for dismantling operations, if allowed such hotwork permission would be at successful bidders cost only to the extent of facilitating the loading and transportation of the goods and subject to that successful bidder take due precaution. 36) For the purpose of removing the materials, the successful Bidder shall employ or engage only his / their own personnel and shall keep the Principal fully indemnified against any claims whatsoever including claim for wage, injuries, compensation, death etc. 37) While removing materials, if any accident or damage to the property/life etc. arises by reason of any act of negligence /omission /default or non-compliance with any of the Terms & Conditions of statutory regulations or rules and regulations applicable within GMDC S premises, on the part of the Successful bidder's / his representative or employees resulting in death or injury to any persons or damages to the property of GMDC or any third Party then in such an event the successful bidder will have to pay compensation to any such person including the employees of GMDC for such injury / for damage to person's property of such persons. The successful bidder shall in such event keep the GMDC indemnified from any demand, claims or proceedings made. 38) In case of Goods sold on Lot Basis, the Ground Rent will be calculated on the value of the entire Lot even if lifted in part, where as in case of Goods sold on Unit Weight or Unit Number Basis, the Ground Rent will be calculated on the value of un-lifted quantity. 39) Bidders have to sign each pages of this tender document as a token of acceptance of its all terms and condition. 40) The Earnest Money Deposit of all unsuccessful bidders shall be returned immediately except to the highest and second highest offer.the EMD of the second highest offer shall be returned on finalization of the Tender bid.
41) For taking delivery of materials successful bidder have to bring Original Delivery order, Original and True copy of Photo ID proof of driving license/pan Card/Election Card, Original Letter pad, Rubber Stamp of your firm. In case successful bidder authorized someone, then he has to bring all documents as stated here and authorizing letter containing signature of representative on letter pad of successful bidder duly authorized by bidder signature. 42) Tenders once submitted cannot be withdrawn on any account. 43) You will also provide and maintain until the scrap is lifted by you, Third party liabilities and property damage insurance, Workman s compensation and road vehicle third party insurance. 44) Since it will not be possible for us to inform each and every bidder regarding updating made in the tender after publishing it hence bidders are adviced to download and carefully study latest updated tender copy on our website www.gmdcltd.com before submitting to us. 45) Please write invariably your Email Id so that any tender updating,offer letter, Delivery Order etc can be mail to you quickly. 46) The Arbitration Clause: Matter relating to any dispute or difference arising out of this tender and subsequent contract based on the bid shall be subject to the exclusive jurisdiction of courts at Ahmedabad only All questions, disputes, differences whatsoever which may at any time arise between the parties to this contract in connection with the contract or any matter arising out of or in relation thereto shall be referred to Sole Arbitrator as per the provisions of Arbitration and Reconciliation Act 1996 and the venue of arbitration proceedings shall be at Ahmedabad. The language of the Arbitration shall be in English 47) Spares quantity written in lot no 47,49 and SME-63 is approximate and actual quantity may vary or some of the spares may not be even available.since we are selling spares on lot basis no claim will be entertained for shortage in spares quantity.
Price Bid GMDC/PND/SCRAP/001/14-15 Lot No Description U.O.M. Quantity Rate in Rs per UOM Total Value in Rs Total Valu Words 1 D.G.Set 1000 KVA,Make: Cummins,Model: KTA 3067G,Sr.no 25213930 NO 1 5 L&T 300 CK II HYD.EXCAVATOR PROJECT Sr.No MT 100 02,GJ-12-AN-1124,TATA HITACHI EX-400 HYD.EXCAVATOR GJ-12-AN-1119 Note: R.T.O Registration cancellation certificate obtained. 6 BEML Dozer D 155 KT 1150 C GJ 12 AN 1132 & MT 50 BEML BH-35 DUMPER SR.NO 29,GJ-12-Y-9716 Note: R.T.O Registration cancellation certificate obtained. 47 Spares for Usha Telehoist 27 items LOT 1 49 Spares for Hyd.Excavator Eder 165 items LOT 1 SME-63 Bucket Wheel Excavator Spares LOT 1 Note: Taxes and duty will be charged extra as applicable.
Bidders sign and stamp: An ISO Certified Company Lot no 47 LIST OF THE SPARES -SUITABLE FOR USHA TELEHOIST MAKE Sr No Code No Part No Decription UOM Qty C 6214 / 1 3100005 310011005 HYD. PRESSURE HOSE NO 10 2 3100007 C 62412 HYD. FLEXIBLE HOSE NO 10 3 3100008 UT 165 TRANION ANGLE NO 1 4 3100009 UT 16 IDLER SHAFT NO 12 5 3100021 UT 773 TRANSMISSION GEAR NO 18 6 3100022 109256 VALVE BODY NO 15 7 3100023 INNER TUBE & CROSS HEAD 10/24849 ASSY. NO 2 8 3100025 1019905 INTER TUBE NO 2 9 3100026 471 / K 23 PTO GEAR NO 5 10 3100029 UT 2648 GLAND NUT NO 1 11 3100032 UT 2649 GLAND NUT NO 1 12 3100039 108619 ELBOW NO 3 13 3100041 109206 END PLATE NO 3 14 3100042 1020643 / B 10019002 LOCKING RING NO 4 15 3100046 UT 2695 DEEP STICK NO 3 16 3100048 UT 71 / A 101007 PRESSURE PIPE ASSY. NO 2 17 3100049 DISTANCE PIECE NO 12 18 3100052 1002 SER KIT PUMP KIT NO 10 19 3100056 1019868 PISTON RETURN ATUBE NO 10 20 3100057 1019900 INNER PISTON NO 6 21 3100062 1020702 TRUNNION ARM NO 15
22 3100064 RH UT 316 TRANION BRACET NO 1 23 3100065 LH UT 316 TRANION BRACET NO 1 24 3100068 1047705 PRESSURE PIPE ASSY. NO 1 25 3100069 1019898 GLAND NUT NO 5 26 3100073 108195 VALVE BODY NO 4 27 3100074 108777 SWASH PLATE NO 1 Lot no 49 List of the spares suitable for EDER make Hydrualic Excavator. Code Sr No No Part No Decription UOM Qty 1 4100002 55791 SEAL KIT NO 1 2 4100008 2035300 NOZZEL WITH HOLDER NO 2 3 4100011 583067 COUPLING ELASTIC MEMBER NO 1 4 4100012 556842 O RING NO 1 5 4100013 556851 O RING NO 4 6 4100014 850146 VALVE DOMPLETE NO 1 7 4100015 719509 / 073120 BRACKE LININ NO 3 8 4100016 552517 / 552521 RIVET NO 31 9 4100017 557502 HOSE NO 1 10 4100018 557503 HOSE NO 1 11 4100019 557194 SEL KIT JOINT NO 1 12 4100020 554009 BUSH NO 4 13 4100021 556013 SEAL NO 5 14 4100023 557582 HOSE NO 1 15 4100024 557540 HOSE NO 1 16 4100025 557086 SEAL KIT NO 2
17 4100026 1870107 / 87107 RELAY NO 1 18 4100301 870104 /41.026A RELAY NO 1 19 4100027 170047 BRAKE HOSE NO 1 20 4100028 850170 BALL COCK NO 1 21 4100030 840636 RELIF VALVE NO 1 22 4100032 870109 STARTER SWITCH NO 1 23 4100034 290679 BOLT NO 1 24 4100035 3007060 OIL SEAL[F.W.F] NO 4 25 4100037 2022130 VALVE SPRING NO 6 26 4100038 304080 SEALING RING FOR FUEL FILTER NO 31 27 4100039 2024030/ 202403000 SEALING RING NO 2 28 4100040 24020 / 2024200 SELING RING BOTTOM NO 18 29 4100041 2039040 O RING FOR DIP STICK NO 1 30 4100044 34084100 DIAPHAM NO 1 31 4100045 557117 SEAL KIT NO 2 32 4100049 703124 REPAINT KIT NO 1 33 4100052 557570 HOSE NO 3 34 4100053 850180 SOLENOID NO 1 35 4100055 780636 MASTER CYLINDER KIT NO 1 36 4100057 554893 BUSHING NO 1 37 4100058 554097 BUSHING NO 1 38 4100059 554098 BUSH NO 1 39 4100064 557549 HOSE NO 3 40 4100066 557111 SEAL KIT NO 2 41 4100068 1540002 TEETH NO 9 42 4100070 1870147 HOUR METER NO 1 43 4100071 2022120 VOLVE COLLECT NO 10 44 4100072 430034210 NOZLE NO 3 45 4100075 555803 SEAL RING NO 2 46 4100076 554502 LUBRICATE NO 15 47 4100078 555727 OLIVE NO 2 48 4200084 3001040 CAM SHAFT BUSH NO 2
49 4100085 2001090 DOWEL PIN FOR THRUST RING NO 4 50 4100086 3047020 JOINT FOR BLANKING PLATE NO 1 51 4100087 5050807 COPPER WASHER NO 1 52 4100088 7550003 THRUSTER WASHER SET NO 1 53 4100090 2035070 BUSH FOR INJECTOR NO 4 54 4100091 6027100 KEAK OFPIPE INDUSRIAL NO 3 55 4100092 3027040 BENJO BOLT NO 8 56 4100094 2036030 RUBBER SLEVE NO 7 57 4100095 6026100 FUEL INJECTION PIPE CYL NO 2 58 4100096 6026200 FUEL INJECTION PIPE CYL-2 NO 2 59 4100097 6026300 FUEL INJECTION PIPE CYL-3 NO 2 60 4100098 6026400 FUEL INJECTION PIPE CYL-4 NO 2 61 4100099 6026500 FUEL INJECTION PIPE CYL-5 NO 2 62 4100100 6026600 FUEL INJECTION PIPE CYL-6 NO 3 63 4100102 3019050 SEALING STRIP NO 4 64 4100104 2024050 SEALING RINGE TOP NO 6 65 4100105 2024040 SPRING NO 24 66 4100106 2024220 SEALINGH WASHER NO 13 67 4100108 3403600 OIL FILLING CVP ASSY. NO 4 68 4100111 3022020 RUBBER SLEEVE NO 6 69 4100112 3022030 GROMMET RUBBER SEEVE NO 9 70 4100113 4020020 SEALING RINGE NO 3 71 4100114 3020050 RUBBER BUSH NO 4 72 4100115 3040030 SEALING RING FOR BOWL NO 22 73 4100120 3013040 RUBBER O RING NO 5 74 4100121 308030 RUBBER O RING NO 4 75 4100123 6051100 SET OFRUBBER O RING SET 1 76 4100125 3003110 JOINT FOR FUEL PUMP NO 5 77 4100127 3013050 JOINT FOR FRONT COVER NO 2 78 4100128 2024320 ROCKER COVER [ALUMINIUM] NO 6 79 4100130 50002/80X030 SET BOLT NO 12 80 4100131 5050608 PLAIN WASHER NO 12 81 4100132 2024130 ROCKER ARM ADUSTING NO 9
82 4100133 2024270 LOCK NUT NO 11 83 4100137 2024140 OIL INTERRING NO 6 84 4100143 3020030 DOUBLE CONE RING NO 6 85 4100144 6040220 SPRING FOR FILTER NO 3 86 4100148 3403210 SEALING RING NO 10 87 4100149 558704 ELECTROLOCK NO 1 88 4100150 1556033 SEAL NO 2 89 4100151 1583055 HOSE COMPENSTING DEVICE NO 1 90 4100152 1557553 HOSE (PILOT LINE) NO 2 91 4100154 556452 / 556450 O RING VALVE BODY NO 12 92 4100155 557338 O RING NO 4 93 4100156 557137 O RING NO 4 94 4100161 557132 SEAL KIT NO 2 95 4100162 556106 SEAL RING NO 1 96 4100163 800283 CENTRAL ROTARY NO 1 97 4100164 1557552 HOSE PILOT NO 1 98 4100166 155481 FITTING NO 3 99 4100167 557125 SEAL KIT NO 1 100 4100168 557124 SEAL KIT NO 1 101 4100170 999804 EXTERED SEAL KIT NO 1 102 4100171 1557072 GASKET NO 1 103 4100172 1200001 STOOPER NO 1 104 4100173 558227 / 558257 INSUL COUPLING NO 1 105 4100174 558257 HOUSING NO 1 106 4100175 558924 BULB AMPUL NO 6 107 4100176 870194 SWITCH NO 2 108 4100178 92520 BUSHING NO 22 109 4100181 NUT (HYDRAULIC NUT GRIDE BOX) NO 1 110 4100182 1900122 AIR CLEANER COMPLET ASSY NO 1 111 4100183 20190300 SHIMS RING NO 24 112 4100184 20353000 OIL SPERAY NOZZLE ASSY NO 3 113 4100186 6037010 HOSE CONNEATION NO 3
114 4100192 200210000 OIL PSRAGNOZZLE NO 26 115 4100194 3027070 LEAK OFF PIPE CONNECTOR NO 1 116 4100196 1558028 CLAMP HOSE NO 2 117 4100198 1558071 CLAMP HOSE NO 2 118 4100199 355207202 ELEMENT CLAMP NO 2 119 4100200 2037060 DIUAL BENJO BOLT NO 4 120 4100201 2019030 SHIM RING NO 24 121 4100204 2021020 LOCATING PIN NO 1 122 4100211 1554093 BUSHING NO 2 123 4100212 1554094 BUSHING NO 2 124 4100214 1555444 FITTING NO 1 125 4100216 1555370 FITTING NO 1 126 4100217 556134 O RING NO 2 127 4100218 556172 O RING NO 1 128 4100219 556173 O RING NO 1 129 4100389 556683 O RING NO 2 130 4100221 556768 O RING NO 2 131 4100223 556878 O RING NO 2 132 4100224 1557072 GASKET NO 2 133 4100225 557086 SEAL KIT NO 1 134 4100227 1557559 FUEL HOSE NO 1 135 4100228 1609418 TRACK LINK LH NO 2 136 4100229 1609419 RTRACK LINK RH NO 2 137 4100230 1609420 BUSH NO 1 138 4100231 1609421 PIN NO 1 139 4100232 1609422 MASTER BUSH NO 1 140 4100233 609444 BUSH NO 1 141 4100234 1551204 NUT NO 10 142 4100235 700070 REPAIR KIT NO 2 143 4100236 1706847 BRAKE HOSE NO 1 144 4100237 1552521 RIVET NO 57 145 4100238 850254 FAN NO 1 146 4100239 1290679 PIN NO 1
147 4100245 3558065 CLAMP NO 2 148 4100247 300706000 OIL SEAL F.W.E. NO 2 149 4100251 556255 SEAL NO 1 150 4100252 556114 SEAL NO 1 151 4100253 557587 HOSE NO 1 152 4100254 850143 COCK NO 1 153 4100255 ALLUMINIUM COUPLING NO 6 154 4100257 92976 ELLOCOS NO 2 155 4100259 583085 SUCTION HOSE NO 1 156 4100266 STEEL BALLS 26MM NO 119 157 4100267 556491 O RING NO 9 158 4100269 840593 PRIMERY VALVE NO 2 159 4100273 60771000010 LEAK PIPE NO 1 160 4100274 565X85X13 / 03013060 OIL SEAL NO 4 161 4100275 3016020 H.T.H.H. BOLT M24X110X2 NO 2 162 4100279 556287 OIL SEAL 140X170X15 NO 1 163 4100280 204210 GASKET FOR ROCER COVER NO 6 164 4100283 L & T BEARING SET TOP & B 075400003 BOTTOM SET 1 165 4100503 554207 BEARING NO 2
Lot No 1 D.G.SET
Lot No 1 D.G.SET
Lot No 1 D.G.SET
Lot No 1 D.G.SET
Lot No 1 D.G.SET
Lot No 6
Lot No 5
Lot No 5
Lot No 5
Lot No 6
Lot No 47
Lot No 49
SME-63 BUCKET WHEEL EXCAVATOR SPARES
ITEM CODE ITEM DESCRIPTION UOM QUANTITY 630001 SHAFT TWO HINGED SHAFT NOS 2 630002 CUP PACKING NOS 10 630007 INNER DISK NOS 7 630008 OUTER DISK NOS 7 630010 BRAKE LINING 27114 NOS 12 630011 BRAKE LINING 500 SET 1 630013 DISTRIBUTOR VALVE COMBINATION FOR NOS 1 630015 PRESSURE REDUCING VALVE LINKING NOS 2 630016 FLOW LIMITING VALVE LINKING UNIT- NOS 3 630017 NON RETURN VALVE FOR HY. PLANT NOS 3 630020 PRESSURES SWITCH 3-8 FOR HY. PLANT NOS 5 630032 METERING VALVE PAG 42H -LUB/ NOS 3 630033 METERING VALVE PAG 43H- LUB. NOS 2 630034 METERING VALVE PAG 44H- LUB. NOS 4 630036 CONNECTING PIECE - LUB PLANT NOS 26 630037 SCREWING 10-320 -LUB PLANT NOS 20 630039 SCREWING E 10-320 - LUB PLANT NOS 27 630040 SCREWING E 16-400 -LUB PLANT NOS 4 630042 SCREWING Q 16-400 - LUB PLANT NOS 6 630043 SCREWING Q 30-250 - LUB PLANT NOS 6 630044 SPACER DR 6/12- LUB PLANT NOS 62 630045 CUTTING RING 10-63 -LUB PLANT NOS 116 630046 CUTTING RING 16-40 - LUB PLANT NOS 50 630047 COCK - LUB PLANT NOS 3 630049 SPACER DR 16/22 - LUB PLANT NOS 14 630051 HOSE LINE 10-8 X630 - LUB PLANT NOS 2 630055 VALVE CONE WITH CREST NOS 11 630057 MICRO SWITCH A1 H1 - LUB PLANT NOS 4 630060 SET OF SEALING ZP 13/3 - LUB SET 2 630061 GASKET Q 1000-600KP /CM2- LUB NOS 3 630063 SPRIAL BEVEL DRIVE NOS 2
630064 SPUR GEAR SHAFT NOS 3 630065 HELICAL GEAR NOS 3 630066 SPRIAL BEVEL DRIVE NOS 3 630069 SEAMLESS PRECISION STEEL PIPE - NOS 5 630071 PLANNET PINION & PLANNET CARRIER NOS 1 630072 CYLINDER GEAR WARM SHAFT NOS 2 630073 CYLINDERICAL WARM GEAR NOS 2 630076 CONNECTING LINKS NOS 1 630081 CONNECTING LINKS NOS 10 630084 PINION NOS 2 630092 BOLTS NOS 13 630101 PROTECTIVE HOOD A 133-10 NOS 100 630102 PROTECTIVE HOOD D 133-10 NOS 100 630107 BRAKE SHOE 500 W (BELT DRIVE) NOS 1 630108 BRAKE SHOE 630(B.W.E. MAIN DRIVE) SET 1 630110 MICRO 5 FILTER NO. 02- NOS 1 630111 AIR FILTER CARTRIDGE P.NO. 60 F NOS 1 630115 SOLONIDE VALVE Z-60- S-H/196 V NOS 1 630116 SEAL KIT SET P.NO B-1-500/320 FOR SET 1 630119 SEAL KIT SET SET 2 630122 INTERNAL LAMINA P.NO.141-2.5 FOR NOS 6 630123 EXTERNAL LAMINER P.NO.122-3:2 NOS 7 630124 HELLICAL COMPRESSOR SPRING C 80 NOS 10 630126 GREASE LINE DISTRIBUTOR 2 WAY NOS 3 630127 GREASE LINE DISTRIBUTOR 3 WAY NOS 10 630128 GREASE LINE DISTIBUTOR 4 WAY PAG NOS 8 630139 COMP.SEAL KIT FOR GEAR PUMP TYPE SET 3 630140 COMP.SEAL KIT FOR GEAR PUMP TYPE SET 2 630171 BEARING - SHIFTING FOR DRIVING NOS 1 630172 BEARING - SHIFTING FOR DRIVE DRUM NOS 1 630177 BUSHES FOR ROCKER ARM 220/250, NOS 6 630178 BUSHES FOR TWO WHEEL ROCKER ARM NOS 6 630179 BUSHES FOR TRACK ROLLER NOS 12
630180 SUPPORT ROLLER WITH BUSHES NOS 3 630181 SPRIAL BEVEL DRIVE M=8, 2=8/32 NOS 1 630185 SPRIAL BEVEL DRIVE WITH HELICAL NOS 3 630186 HELICAL GEAR WITH HELICAL SPUR NOS 2 630188 SIPRAL BEVEL DRIVE 08.0234. NOS 3 630189 SPUR GEAR STEP NOS 1 630191 HOOKS FOR ROLLER NOS 50 630211 OIL FILTER FOR HY. SYSTEM OF MTC NOS 10 630212 OIL FLOW REGULATOR 10.03.01/0 NOS 1 630216 LUBRICATION PIPE NOS 53 630217 LUBRICATION PUMP ZP 175/80 NOS 1 630221 BEARING 23148 CCK /W 33 NOS 1 630222 SLEEVE H3148A NOS 4 630223 BARING P/N 564647 NOS 1 630227 BEARING 22314 CC/C3 W 33 NOS 3 630228 BEARING 6228/C3 NOS 1 630231 BEARING 22316 CC/C3 W 33 NOS 1 630233 BEARING NU 414 NOS 1 630234 BEARING 22313 CC/C3 NOS 2 630243 BEARING 23132 CC/W 33 NOS 2 630248 BEARING 22313 E NOS 1 630250 BEARING 22222 E NOS 2 630251 BEARING 22226 CC/W 33 NOS 1 630252 BEARING 22228 CC/W 33 NOS 2 630255 BEARING 23052 CC/W 33 NOS 2 630259 BEARING NUP 204 ECP NOS 3 630263 BEARING NJ 309 ECP NOS 6 630264 BEARING 6017 NOS 1 630265 BEARING NUP 230ECJ NOS 1 630266 BEARING 6036 M NOS 1 630267 BEARING 6026 NOS 1 630269 BEARING 6022 NOS 1 630271 BEARING 6044 M NOS 1
630272 BEARING NUP 238 E M 1 NOS 1 630278 BEARING SKF NU 2317 NOS 2 630280 BEARING SKF 6314 NOS 1 630282 BEARING 23232 CC/03 W-33 NOS 1 630283 BEARING 514893 NOS 2 630284 BEARING 24148 CC/C3 W33 NOS 3 630286 BEARING 24126 SPRB NOS 4 630294 BUSHING FOR COUPLING KSA 7:1 NOS 1 630296 EXTRACTION DEVICE FOR COUPLING NOS 1 630297 PROTECTIVE HOOD A 159.08 NOS 100 630298 PROTECTIVE HOOD B 159.06 NOS 100 630300 SOLENOID SWITCH M66 TYPE G35 H24V NOS 1 630301 SEAL KIT FOR RECIAMER RECIVING SET 1 630303 BEARING BALL & SHOCKET NOS 1 630313 WEARING PLATE 8X230X230 NOS 1 630319 WEARING PLATE 8X330X230 NOS 1 630321 WEARING PLATE 8X210X210 NOS 2 630322 WEARING PLATE8X120X120 NOS 1 630324 WEARING PLATE 2X300X120 NOS 8 630325 WEARING PLATE 1X300X100 NOS 4 630330 COUNTER SNAKE SCREW NOS 25 630332 HEX NUT M-12 NOS 55 630333 LOCKING NUT M-12 (SP. WASHER) NOS 72 630339 BRAKE LINING 630 SET 4 630340 HEX BOLT M16X55 NOS 16 630342 HEX NUT M16 NOS 16 630343 WASHER NOS 24 630344 LOKING NUT M16 NOS 24 630347 PLATE 10X120X60 NOS 4 630349 THIMBLE DIN 6899 BF.10 NOS 8 630356 WIRE ROP CLAMP DIN 1142 S.65 NOS 16 630358 HEX BOLT M.12X40 NOS 8 630359 HEX NUT M.12 NOS 8
630360 LOCK WASHER A.12 NOS 8 630362 HYDROLIC PLUG 24V NOS 5 630367 BRAKE LINING 250 SET 4 630368 BUSHING SPLIT 360X380X240 NOS 4 630379 COMPLETE REPAIR SEAL KIT FOR KIT 1