DIVISION OFFICE, GANDHINAGAR. TENDER NOTICE NO :- 08-2018-19 SR NO :- 1 P R No: - 352316 RFQ No: - 48684 Sr.No Particulars Description 1 Tender For Tender of labour charges for making fabrications of HT LT & TC for Gandhinagar DO UGVCL 2 Estimated Cost Rs. 485687/- 3 Earnest Money Deposit Rs. 5000/- 4 Security Deposit 5% Of Order Value 5 Last Date & Time Of Issue Tender Dt 04.06.2018 Up To 14.00pm 6 Last Date & Time Of Submission Of Dt 14.06.2018 Up To 15.00pm Tender (Only By Rpad/Speed Post) 7 Date & Time Of Opening Of Tender Dt 14.06.2018 At 16.00 Pm (If Possible) 8 Tender Fee (Non Refundable) Rs. 590/- (With 18% GST) 9 Time Limit 12 Month Issued To: M/S. Executive Engineer Gandhinagar : To Be Filled By The Tenderer: Tender Fees Rs. Paid Vide Receipt No Dt. EMD Rs Paid Vide Receipt No Dt..
P R No: - 352316 RFQ No: - 48684 Lin e No. Item Code 2 991000 0027 3 991000 0028 4 991000 0032 5 991000 0034 6 991000 0036 7 991000 0039 8 991000 0040 SCHEDULE B Item Description Category UOM Quanti ty fabrication of V-X arm from 65x65x6mm M.S. angle Top fittinf from 65x65x6mm M.S. angle and 50x6mm M.S. flat anchor rod from 65x65x6mm M.S. angle and 16 mm sq round bar. Turn buckle from 65x65x6mm M.S. angle and 16mm sq round bar. fabrication of eye bolt from 16mm sq round bar fabrication of C clamp(u) for LT shackle insulator made from 50x6mm M.S. Flat Price (INR) Amount (INR) 99.01 Number 2800 20.6 57680 99.01 Number 500 7.21 3605 99.01 Number 2000 5.15 10300 99.01 Number 2000 5.15 10300 99.01 Number 2000 22.66 45320 99.01 Number 4500 2.06 9270 99.01 Number 4500 3.6 16200 fabrication of side clamp
9 991000 0041 10 991000 0042 11 991000 0043 12 991000 0044 13 991000 0045 14 991000 0046 15 991000 0050 16 991000 0051 for PSC pole made from 50x6mm M.S. Flat fabrication of stay clamp 99.01 pair for PSC pole made Pair 4500 4.64 20880 from 50x6mm M.S. Flat fabrication of three hole 99.01 patti made from Number 500 1.54 770 50x6mm M.S. Flat fabrication of 3.36 Mtr angle made 99.01 Number 1000 8.24 8240 65x65x6mm M.S.angle fabrication of 2.75 Mtr anglr made from 99.01 Number 2500 7.72 19300 65x65x6mm M.S. angle. fabrication of 1.35 Mtr anglr made from 99.01 Number 2500 7.47 18675 65x65x6mm M.S. angle. fabrication of 0.75 Mtr anglr made from 99.01 Number 3000 7.21 21630 65x65x6mm M.S. angle. fabrication of 2.75 Mtr channel made 99.01 Number 2500 32.96 82400 from100x50x6mm M.S Channel. fabrication of V- Xarm extension made from 99.01 Number 60 195.7 11742 65x65x6mm M.S. angle and 65x6mm M.S.flat
17 991000 0053 18 991000 0061 19 991000 0067 20 991000 0075 21 991000 0094 fabrication of V-Xarm made from 65x65x6mm M.S. angle(for 22KV). fabrication of 3.36Mtr made from 100x50x6mm MS channel (For 22KV) fabrication of 0.75 Mtr angle from 50x50x6mm. fabrication of 2750 MM Angle CROSS ARM from 50x50x6 mm M.S. angle fabrication of Earthig coils made from G.I.Wire No.8 Tot al I / We am /are willing to carry out the work (1) On company Rate (2) % Above of estimated rate (3) % Below of estimated rate 99.01 Number 1000 25.75 25750 99.01 Number 1000 36.05 36050 99.01 Number 2500 6.18 15450 99.01 Number 2500 7.21 18025 99.01 Number 5000 10.82 54100 46860 485687 Supdt.Of A/C(Exp), Gandhinagar. Executive Engineer, Gandhinagar. Seal and Signature of Tenderer
Following documents to be submitted along with Tender. A. Solvency Certificate / Bank Guarantee issued from any Nationalized Bank amounting to sum equivalent to amount of five times of the tender value. Tenderer can opt to submit it within 15 days if he is eligible as a lowest tenderer, but the undertaking for same should be put up with the tender. B. Separate EPF Code No. allotted by RPFC & Last Six month of current year EPF Challan paid copy is required. C. Registration certificate in appropriate class as contractor in UGVCL/ any DISCOM/PWD/Irrigation/Central Govt. undertaking / State Govt. undertaking. D. Latest income tax clearance certificate and PAN No. in the name of Tenderer. E. Experience of work of Rs 10 Lacs executed during current year for Fabrication under Gandhinagar Division. F. Group Insurance: A copy of the insurance policy of the insured labourer s under W.C. Act 1923. G. The contractor will have to undertake responsibility of accidents etc. for his persons working on line and same will be on stamp paper of Rs. 100/- or of the appropriate value (if revised by Govt.) The cost of stamp paper will be borne by contractor. H. List of the Tools & Tackles and safety equipments available with contractors on his letter pad. I. Copy of the Electrical contractor license as and when required. J. Service Tax registration is required and implements as per Head Office, Mehsana Circular. No. 2166 Dt.18.9.14. K. Vendor registration of UGVCL Reg office Mehsana must be required
The contractor will have to give the following under taking. 1 Should this tender be accepted, I/we hereby agree to abide by and fulfill all the terms and provision of the Tender and contract of works as applicable and in default thereof to forfeit and pay to the Company the sum of money due. 2. The value of earnest money deposit paid herewith should be absolutely forfeited to the company, should I/We not deposit the full amount of specified security deposit, within specified time limit. 3. The contractor shall co-operate with the Company in recording measurement etc. as expeditiously as possible and he shall fulfill all the requirements which are necessary to finalize his outstanding bills within one month from the date of completion of work, failing which the Company shall finalize the account on the basis of its records and pay him such amount as found due to him together with the amount of security deposit if any remaining payable to him after deducting there from the amount due by him to the Company s for shortages of materials, rectification, incomplete work, etc and the Company shall not entertain any further claim from him thereafter. 4. The competent authority can delete any item in schedule B in the tender, if he feels that the rate quoted by the contractor for that item is abnormally high when compared to the estimated rate. 5. In case of any dispute S.E. will be the final authority for deciding the same and his decision will be final and binding on the contractor and Department and no further appeal will be entertained. 6. The contractor will have to see that safety equipments are used by his labourers, while working on line, equipment etc. of the Company and contractor will be responsible for any accident. 7. The contractor will have to undertake the responsibility of accidents etc. for his persons working on line and same will be on stamp paper of Rs. 100/- or of the appropriate value (if revised by Govt.) The cost of stamp paper will be borne by the contractor. 8. The contractors will have to take insurance of suitable amount for his labourers. 9. Contractors should carry out the work under supervision of UGVCL.
10. Following documents to be submitted with filed Tender 1. Copy of UGVCL Vendor registration letter for current period is must. 1. Copy of Labour License of current year is required must. 2. Contracter should produce TIN NO. & Pan card copy 3. P.F. Account Number,Work experience Certificate. 4. Electrical contractor license. 5. Bank solvency certificate. 6. ESIC policy & insurance premium challan copy. 7. Copy of Last year IT return. 8. Experience: Contracter should produce evidence of having experience in executing similar nature and magnitude of jobs preferably photo copy of orders secured from any GUVNL Discom and satisfactory completion certificate from respective department. 9. Minimum 10 lacs experience of work. 10. Attested copy of power of attorney,if any, for signing the Tender documents. 11. If technical bid is not fulfill as per requirement of document then tender will liable to reject automatically. 12. The technical bid must he accompanied by Photo ID & their office address proof of Gandhinagar Division jurisdiction. 13. Service Tax registration is required. 14. Tender fee Amt. & DD No. & Date 15. EMD Amount & DD No. & Date. 16. The Sealed Technical bid comprising of schedule B should be submitted in separate sealed envelope super scribe accordingly on the envelop. 17. The sealed price bids comprising of schedule B should be submitted in separate sealed envelop super scribe accordingly on the envelope. 18. Both envelopes comprising of Technical bid and price bid should be submitted in one common envelope super scribing the name of work and tender oprning date etc UGVCL reserves the right to reject any OR all tenders without assigning any reasons there of 19. Group insurance : A copy of insurance policy of the insured labourer s under W.C. Act 1923. 20. The contracter will have to undertake responsibility of accident etc. for his persons working on site and same will be on stamp paper of Rs. 100/- or of appropriate value ( if revised by Govt.) The cost of stamp paper will be borne by contractor. 21. List of Tools & tackles and other Safety Equipments available with contractor on his letter pad. 22. GST NO IS MUST REQUIRED & IT IS IMPLEMENTS AS PER UGVCL COMPANY NOMS 23. You Must pay Tender Fee with 18% GST Rate as per circular UGVCL/R&C/ACCOUNT/GST/1090/14.7.17
Important instructions for submitting the Tender 1. Executive Engineer, GANDHINAGAR DO. has invited Tender for erection work of HT, LT line and T/C under Sub-Division for various scheme of Division from the contractors / firms who have executed works of similar nature and magnitude successfully and who are registered under appropriate class. (Mention S/dn which applicable) (In the case of Tender for E/o of HT,LT & T/c Line Work) 2. Tender documents are in. Technical Bid System 2.1 Technical bid is to be submitted in a separate sealed envelope and subscribing the envelope as Technical Bid. Technical bid should be submitted with documents as under, failing which tender is liable for rejection, following documents dully attached should be submitted for pre qualification criteria. Pre-Qualification criteria for selection in Technical Bid A. Solvency Certificate / Bank Guarantee issued from any Nationalized Bank amounting to sum equivalent to amount of five times of the tender value. Tenderer can opt to submit it within 15 days if he is eligible as a lowest tenderer, but the undertaking for same should be put up with the tender. B. Separate EPF Code No. allotted by RPFC & Last Six month of current year EPF Challan paid copy is required. C. Registration certificate in appropriate class as contractor in UGVCL/ any DISCOM/PWD/Irrigation/Central Govt. undertaking / State Govt. undertaking. D. Latest income tax clearance certificate and PAN No. in the name of Tenderer. E. Experience certificate and satisfactory work completion certificate required for erection of HT-LT line & T/C work by authorized officer of any Distribution Company of Gujarat. F. Copy of the last three annual work orders of erection of HT/LT line & T/C of any Distribution Company is required. G. Group Insurance: A copy of the insurance policy of the insured labourer s under W.C. Act 1923.
H. The contractor will have to undertake responsibility of accidents etc. for his persons working on line and same will be on stamp paper of Rs. 100/- or of the appropriate value (if revised by Govt.) The cost of stamp paper will be borne by contractor. I List of the Tools & Tackles and safety equipments available with contractors on his letter pad. J. Copy of the Electrical contractor license as and when required. K. Service Tax registration is required. 2.2 The sealed Price Bids comprising of Schedule- B should be submitted in separate sealed envelope subscribing the envelope as Price Bid. 2.3 Both Technical and Price bid should be submitted in one common envelope subscribing the name of the work and tender opening date etc. 3.0 Bids as above should reach to The Uttar Gujarat Vij Company Limited Division office, KALOL upto stipulated time. 3.1 Technical bid shall be opened on date (as mentioned)(if possible) in the presence of the bidders, who remains present at that time. 4.0 Earnest money deposit of should be deposited in form of Demand Draft in favour of UTTAR GUJARAT VIJ COMPANY LIMITED drawn on any scheduled Bank, payable at GANDHINAGAR. 5.0 Bidders should complete the tender documents in all respects and it should be signed by contractor with Company s seal on all pages. 6.0 The bidders shall submit their offer without any deviations in general terms and conditions of the contract or in Technical specification/items. Tenders of such deviations may also be rejected. Incomplete and conditional tenders shall not be considered. 7.0 UTTAR GUJARAT VIJ COMPANY LTD reserves the right to split up the work covered in the scope of this contract amongst more than one contractor. 8.0 The rates shall be quoted both in words and figures as per unit specified in schedule- B in case of any discrepancy between the rates quoted in words & figures, rate quoted in words will
prevail. A Cello tape must be adhered on rates provided by the contractor along with signature and stamp. 9.0 Intending bidders should submit their tenders after studying all tenders documents carefully and visiting the site for satisfying themselves of actual site conditions, location and accessibility of site and nature, extent of the work involved etc. Submission of tenders implies that bidders have obtained all necessary information and other data required for executing the work and read all the terms and conditions. No claim for extra charges on account of any misunderstanding will be allowed. 10.0 All approaches to the site shall be in the scope of bidders. 11.0 Bidders will not be allowed to give sub-contract of the works awarded to him for any, reasons what so ever without written permission of competent authority. 12.0 In the experience certificate, contractor has to furnish the details of similar works executed by him along with the list of equipments, tools and tackles and manpower available with him. 13.0 Price quoted shall be firm, till overall completion of the work, under contract and there will not be any price escalation. 14.0 Date of opening of Price Bid will be intimated later on to those Bidders who are qualified in technical bid. Price bid of only qualifying bidders on the basis of Technical bid shall only be opened. Price Bid, who are not qualified technically as per requirement of technical bid shall not be opened. 15.0 Offers shall be valid for the period of 120 days from the date of opening of price bid. Tenders shall not withdraw tenders during the validity period, failing which their EMD shall be forfeited during the said period of 120 days. 16.0 All the works shall be carried out as per specifications attached with the tender and relevant Indian Standard issued by Bureau of Indian Standards. All materials procured should be confirming to relevant Indian Standard issued by Bureau of Indian Standard. 17.0 Tenders, which do not fulfil all or any of the conditions of the tender of incomplete in any respect, are liable for rejection. 18.0 Uttar Gujarat Vij Company Ltd. reserves the right to reject any or all tenders without assigning any reason thereof.
19.0 a. The tenderer must quote his rate per unit specified in the schedule in figures as well as in words. If there is difference between rates quoted in words and figures rates quoted in words shall prevail. Further should there be any discrepancy between rate and amount that rates shall prevail. b. The tenderer must quote his rates net lowest and the rates not confirming to the unit specified in schedule may not be considered even though they may be lowest. c. The rates must be stated for each item separately and in addition percentage of reduction in the total price if any should also be quoted. d. Any variation in rates etc will not be allowed on any ground once the tender sumitted is opened for consideration. e. The tenderer s own conditions of the contract will not be considered as forming the part of the tender. The tenderers must send in their tenders, only if the Company s conditions are acceptable to them. f. All corrections what so ever made in the tendered rate must be signed fully with date by the tenderer before submitting the tenders. g. Rates must be quoted without any conditions in case of divergence between rates in figures and words; it will be constrained to read the rate most favorable to Company. (20) The rate quoted should be in percentage higher /lower/rate to rate. EXECUTIVE ENGINEER UGVCL D.O., GANDHINAGAR