Osborne Books Tutor Zone Preparing and using budgets Chapter activities Osborne Books Limited, 2013
2 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 1 The budgeting environment 1.1 Match the data in the first column with the appropriate source selected from the second column. Data Short term future demand Standard labour times Rejection rates Current pay rates Source Quality control records Office for National Statistics HR records Unfulfilled sales orders PEST analysis HMRC website Work study reports 1.2 Calculate the appropriate budgeted overhead recovery rate for the following production department. The department s annual budget for indirect costs is: Indirect labour 15,000 Supervisor wages 26,700 Depreciation of equipment 32,500 Machine maintenance 28,500 Canteen subsidy 1,300 Total 104,000 Note: The budget production is for 2,000 units of product A and 4,000 units of product B. Each unit of product A requires 1 labour hour and 3 machine hours. Each unit of product B requires 1 hour of labour and 5 machine hours. Complete the following: Overhead recovery should be based on Units of production / Labour hours / Machine hours The recovery rate will be per
c h a p t e r a c t i v i t i e s 3 1.3 A company wishes to estimate how its overheads behave when production volumes change. (a) Complete the following table, and by using the high-low method calculate the expected variable costs (per unit) and fixed costs (per month). Cost per month Output per month (units) Data provided 50,000 7,000 Data provided 40,000 5,000 Difference Variable cost per unit Fixed cost per month (b) Using the information calculated in part (a), complete the following table to show the breakdown of estimated costs at a monthly production level of 6,500 units. Variable costs Fixed costs Total costs
4 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 1.4 Complete the following sentences: Where inventory levels increase, absorption costing will record a higher / lower / equal profit compared to marginal costing. This is because under absorption costing more / less / equal amounts of cost are transferred to the following period through the increased / reduced / equal inventory valuation.
c h a p t e r a c t i v i t i e s 5 2 Forecasting techniques 2.1 This year s sales are 3,500,000. Analysis of recent years shows: a growth trend of 2% per annum seasonal variations from the trend of quarter 1 30,000 quarter 2 + 15,000 quarter 3 + 25,000 quarter 4 10,000 Forecast the sales for each quarter of next year, using the following table. Quarter 1 Quarter 2 Quarter 3 Quarter 4 Total Sales
6 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 2.2 The quarterly sales trend for this year s quarter 4 is 2,800,000. Analysis of recent years shows: a growth trend of 20,000 per quarter seasonal variations from the quarterly trend of quarter 1 5% quarter 2 +8% quarter 3 +12% quarter 4 15% Forecast the sales for each quarter of next year, using the following table. Quarter 1 Quarter 2 Quarter 3 Quarter 4 Total Sales 2.3 Electricity costs for the last year were 390,000, based on a price of 8p per kwh used. The forecast for next year shows a reduction in consumption of 10% due to energy saving measures, but a price increase of 7%. Using the following table, calculate the electricity budget for next year. Do not round any figures. Current year s usage (kwh) Next year s usage (kwh) Current year s price per kwh ( ) Next year s price per kwh ( ) Budget for electricity next year ( )
c h a p t e r a c t i v i t i e s 7 2.4 Next year s sales were originally forecast at 6,106,500, assuming a 3.5% selling price increase from this year. The increase has now been agreed at 2% instead. Assuming the sales volume rises by 1% from the original forecast due to the lower price increase, calculate the revised sales forecast. (a) 6,078,180 (b) 6,255,761 (c) 5,959,000 (d) 6,077,000
8 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 3 Preparing budgets the main principles 3.1 Complete the following table to show the forecast inventories and production units for a particular product. Closing inventory should be 25% of the following week s forecast sales Number of Units Week 1 Week 2 Week 3 Week 4 Week 5 Opening inventory 2,500 Production Sub total Forecast sales 10,000 12,500 13,000 11,500 12,000 Closing inventory Forecast sales in week 6 are 13,000 units.
c h a p t e r a c t i v i t i e s 9 3.2 The following production budget for a month has been prepared. Production Budget Units Opening inventory of finished goods 9,000 Production 50,000 Sub total 59,000 Sales 55,000 Closing inventory of finished goods 4,000 (a) Complete the following working schedule for raw materials. Each unit produced requires 0.8 kg of material. Closing inventory is valued at budgeted purchase price. Raw Materials kg Opening inventory of raw materials 2,500 7,500 Purchases of raw materials 45,000 157,500 Sub total 47,500 165,000 Used in production Closing inventory of raw materials (b) Complete the following working schedule for direct labour. Each unit takes 3 minutes to make. There are 12 direct labour employees, each working 200 basic hours in the month. Additional hours are paid at an overtime rate of time and a half. The overtime premium is included in the direct labour cost. Direct Labour Hours Cost Basic time at 10 per hour Overtime Total (c) Complete the following working schedule for production overheads. Variable overheads are recovered based on total labour hours worked. Production Overheads Hours Cost Variable overheads at 4.00 per hour Fixed overheads 12,000 Total production overheads continued
1 0 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e (d) Complete the following operating budget, using information from the earlier tasks. Closing inventory of finished goods is to be valued at budgeted production cost per unit. Operating Budget Units per unit Sales 4.50 Cost of Goods Sold: Opening inventory of finished goods 31,500 Cost of production: Raw Materials Direct Labour Production Overheads Total cost of production Closing inventory of finished goods Cost of goods sold Gross profit Non-production overheads Administration 10,000 Marketing 12,500 Total non-production overheads Net profit
c h a p t e r a c t i v i t i e s 1 1 3.3 The following budget data has been prepared. Budget Data June July August Sept Credit Sales 5,900 6,300 5,800 6,500 Purchases 2,200 2,180 2,850 2,900 Wages 2,000 1,950 2,050 2,100 Expenses 1,050 1,950 1,060 1,090 Capital expenditure 4,000 4,500 Timings: 40% of credit sales are received in the month after sale, the remainder 1 month later. Purchases are paid in the month after purchase. Wages are paid in the month incurred. Expenses are paid in the month after they are incurred. Expenses include 130 per month depreciation. Capital expenditure is paid immediately it is incurred. Complete a cash forecast for August, using the following table. Cash Forecast August Opening cash balance (1,450) Receipts from sales Payments for: Purchases Wages Expenses Capital expenditure Total payments Closing cash balance
1 2 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 4 Preparing budgets dealing with resources 4.1 51,000 units of finished product are to be manufactured in September. Each finished unit contains 5 kg of raw material. 15% of the raw material input is wasted during production. Inventories of raw material are to be: opening inventory 10,000 kg closing inventory 15,000 kg Select the quantity of raw material to be purchased from the following: (a) (b) (c) (d) 275,750 kg 304,250 kg 295,000 kg 305,000 kg 4.2 Department P manufactures three products, Exe, Wye and Zed. Calculate the machine hours required to manufacture these in November, using the following table. Product Units Units per hour Hours required Exe 290 1.0 Wye 100 2.5 Zed 130 2.0 Total machine hours for department P There are two machines in the department. Each machine can be used for 200 hours in November. Additional machines can be hired if required. How many additional machines should be hired?
c h a p t e r a c t i v i t i e s 1 3 4.3 The following information is available about a company that makes a single product. Each unit is made from 1.25 kg of material costing 3.80 per kg. It takes 20 minutes to make each item. 750 hours of basic labour time is available in the month of April. Any extra hours must be worked in overtime. The basic labour rate is 15 per hour. Overtime is paid at time and a half (50% more than basic rate). Variable overhead relates to labour hours worked, including overtime. Fixed overhead costs are incurred evenly through the year. Complete the following table with the April budget figures. Budget for the year Budget for April Units sold 36,000 3,000 Units produced 33,000 2,400 Sales 504,000 Cost of production: Materials used 156,750 Labour 180,000 Variable production overhead 22,000 Fixed production overhead 27,000 4.4 39,600 units of finished product are to be manufactured during October. Each unit takes 5 minutes to produce. 20 staff each work 150 basic hours in October. The number of overtime hours required to be worked in October is
1 4 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 5 Monitoring performance with budgets 5.1 The operating statement that forms part of the following table has been produced, using the original fixed budget (based on production and sales of 80,000 units) and the actual costs which occurred when 75,000 units were produced and sold. Using the data in the operating statement, together with the notes shown below, complete the flexed budget and variances in the appropriate columns in the table. Original Budget Actual Flexed Budget Variances Fav / (Adv) Volume (units) 80,000 75,000 75,000 Turnover 1,680,000 1,583,000 Costs: Materials 400,000 380,000 Labour 560,000 525,000 Distribution 200,000 185,000 Energy 20,000 19,000 Equipment hire 15,000 16,000 Depreciation 14,000 14,000 Marketing 48,000 50,000 Administration 49,000 48,000 Total Costs 1,306,000 1,237,000 Operating Profit 374,000 346,000 Notes on budget: Material, labour and distribution costs are variable The budget for energy is semi-variable. The variable element is 0.20 per unit Equipment hire budget is based on a cost for each 8,000 units or fewer Depreciation, marketing and administration costs are fixed
c h a p t e r a c t i v i t i e s 1 5 5.2 Hedgit Limited originally produced two budgets, one based on an output of 20,000 units, and one based on an output of 25,000 units. The actual output (production and sales) was 24,500 units. Complete the following table with a flexed budget and variances based on the flexed budget. Budget 1 Budget 2 Actual Flexed Budget Variances Fav / (Adv) Units 20,000 25,000 24,500 24,500 Sales 1,500,000 1,875,000 1,795,000 Materials 700,000 875,000 865,000 Labour 260,000 310,000 300,000 Production Overheads 350,000 390,000 389,000 Administration Overheads 90,000 90,000 92,000 Operating Profit 100,000 210,000 149,000
1 6 p r e p a r i n g a n d u s i n g b u d g e t s t u t o r z o n e 5.3 Twominds Limited is currently using absorption costing for budgeting, but is considering a change to marginal costing. The following statement has been produced showing the original budget and the actual performance, both using absorption costing. The original budget was based on sales and production of 20,000 units, but the actual sales were 18,000 units and the actual production was 21,000 units. Original Budget Actual Sales 400,000 342,000 Less cost of sales Opening inventory 0 0 Cost of production: Direct materials 120,000 130,200 Direct labour 140,000 159,600 Production overheads 50,000 46,200 310,000 336,000 Less closing inventory 0 48,000 310,000 288,000 Gross profit 90,000 54,000 Non-production overheads 30,000 31,000 Operating Profit 60,000 23,000 Direct Materials and Direct Labour are variable costs. Production Overheads and Administration Overheads are fixed costs. Using the following table: Produce a flexible budget in Marginal Costing format Rewrite the actual results in Marginal Costing format Calculate variances
c h a p t e r a c t i v i t i e s 1 7 Flexible Budget Actual Variances Fav / (Adv) Sales Less variable costs: Materials Labour Contribution Less fixed costs: Production overheads Non-production overheads Operating profit