COATED PRODUCTS Price Sheet COR-11.14 Effective: November 3, 2014 Cancels Price Sheet COR-5.14 of May 12, 2014 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL UPC numbers numbers are available upon request. To obtain current ISO certifications, listings, and other approvals, visit Anvil s website at. Pricing is subject to change without notice. Go to Anvil s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer s risk. Shipments should be carefully examined upon delivery and before the carrier s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. NORTHERN REGION CUSTOMER SERVICE CENTER 80 0-301-2701 SOUTHERN REGION CUSTOMER SERVICE CENTER 800-451-4414
1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller s products. No waiver, alteration or modification of these terms and conditions whether on Buyer s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay. 3. WARRANTY: Seller warrants for one year from the date of shipment Seller s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer s acceptance of Seller s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller s product warranty. THIS IS SELLER S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives. 6. SHIPMENTS: All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller s responsibility ceases, and title passes, on delivery to the carrier. 7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application. 8. S AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated. 9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities. 10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to selfinsure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence. 11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation. 12. TERMS: Cash, net 30 days unless otherwise specified. 4. SELLER S LIABILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under Warranty above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer. 5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments. 2 Revised:
TABLE OF CONTENTS ANVIL CORVEL COATED PRODUCTS Malleable Iron, Cast Iron, and Steel Fittings...4 Forged Steel...5 Steel Pipe Nipples...6 Adapter Nipples...7 Swage Nipples...8 JB Smith Oil Country...9 Swage Nipples Tubing Nipples API Tubing Couplings Bull Plugs JB Smith Bull Plugs.... 10 JB Smith Tapped Bull Plugs... 10 Catawissa Hammer Unions.... 10 Gruvlok... 11 Revised: 3
MALLEABLE IRON, CAST IRON, AND STEEL FITTINGS MI 90 ELBOW STEEL XH API COUPLING 1 2 $19.76 50 3 4 $20.28 35 1 $22.51 20 2 $36.90 10 21 2 $64.16 5 MI TEE 3 $90.20 4 4 $175.45 5 1 2 $20.61 40 3 4 $22.06 20 1 $25.49 12 2 $45.52 10 21 2 $81.34 4 3 $115.93 3 4 $254.85 4 MI 45 ELBOW 1 2 $21.39 75 3 4 $22.37 40 1 $23.70 25 2 $38.58 6 21 2 $82.12 5 3 $106.32 4 4 $195.07 4 1 $36.72 25 2 $64.84 15 21 2 $91.11 - UNION 3 $110.14 1 4 $170.64 1 MI UNIONS 150 1 $41.53 15 300 1 $56.43 10 MI HEX BUSHINGS CI HEX BUSHINGS 2 x 1¹/₂ $26.17 20 2 x 1 4 $27.55 15 2 x 1 2 $28.79 15 2 x 3 4 $26.38 15 2 x 1 $25.97 15 3x2 $42.35 1 4x2 $74.42 20 4x3 $74.42 1 MI BLACK RH COUPLINGS 1 $23.33 25 2 $33.00 5 3 $84.95 4 4 $156.29 4 CI SOLID SQUARE HEAD PLUG 3 $61.59 1 4 Revised:
FORGED STEEL 2000 FS THREADED 90 ELBOW 3000 FS THREADED 90 ELBOW FS HEX BUSHING 1 2 $24.16 25 1 $26.96 25 2 $49.74 5 21 2 $105.89-3 $158.17 32 4 $470.74 12 2000 FS THREADED TEE 1 2 $25.63 25 1 $33.01 25 2 $59.43 5 21 2 $127.35 1 3 $210.49 32 4 $495.03 1 2000 FS THREADED 45 ELBOW 1 $30.42 25 2 $58.13 5 21 2 $129.70 1 3 $202.65 1 4 $481.78 1 2000 FS THREADED CROSS 2 $122.52 5 3 $469.10 1 3000 FS THREADED COUPLING 2 $58.77 5 3000 FS THREADED TEE 1 $36.24 3.05 2 $72.85 7.15 3000 FS THREADED 45 ELBOW 2 $69.87 5 3000 FS AAR THREADED UNION 1 $45.21 10 2 $78.41 9 1 $24.33 25 2 $36.29 10 21 2 $67.52 5 3 $115.22 1 4 $204.95 1 1 2 $19.55 100 1 $21.85 50 2 $30.23 12 3 $89.12 12 4 $174.31 5 Revised: 5
STEEL PIPE NIPPLES ANVIL CORVEL SCH 40 WELDED NIPPLES SCH 80 SEAMLESS NIPPLES 1 4 x 2 $19.28 25 1 4 x 3 $19.90 25 1 4 x 4 $20.28 25 1 2 x 2 $18.90 25 1 2 x 3 $19.20 25 1 2 x 4 $19.63 25 1 2 x 6 $20.32 25 3 4 x 2 $19.28 25 3 4 x 3 $19.55 25 3 4 x 4 $20.13 25 1 x CLOSE $20.01 25 1 x 2 $20.28 25 1 x 3 $20.43 25 1 x 4 $21.23 25 1 x 6 $22.80 25 1 x 8 $26.29 25 1 x 10 $27.82 25 1 x 12 $29.39 25 2 x CLOSE $23.15 25 2 x 3 $24.03 25 2 x 4 $25.45 25 2 x 5 $26.71 20 2 x 6 $28.32 10 2 x 8 $35.75 10 2 x 10 $39.00 10 2 x 12 $42.30 5 3 x CLOSE $48.07 20 3 x 4 $54.38 10 3 x 6 $59.98 10 3 x 8 $71.77 5 3 x 10 $77.40 1 3 x 12 $83.00 1 3 x 36 $239.29 1 4 x CLOSE $70.91 1 4 x 4 $76.07 1 4 x 6 $84.50 1 4 x 8 $91.70 1 4 x 10 $99.17 1 4 x 12 $109.70 1 1 4 x CLOSE $22.78 25 1 4 x 2 $23.50 25 1 4 x 3 $24.83 25 1 4 x 4 $26.57 25 1 2 x CLOSE $20.30 25 1 2 x 2 $20.81 25 1 2 x 3 $21.59 25 1 2 x 4 $22.66 25 1 2 x 6 $25.32 25 1 2 x 8 $29.49 25 1 2 x 10 $31.32 25 1 2 x 12 $33.18 25 3 4 x 2 $21.10 25 3 4 x 3 $22.10 25 3 4 x 4 $23.31 25 1 x CLOSE $22.11 25 1 x 2 $22.41 25 1 x 2 1 2 $22.77 25 1 x 3 $23.71 25 1 x 4 $25.25 25 1 x 6 $28.75 25 1 x 8 $35.44 25 1 x 10 $38.10 25 1 x 12 $41.20 25 2 x CLOSE $25.97 25 2 x 2 1 2 $27.04 25 2 x 3 $28.63 25 2 x 4 $30.92 25 2 x 5 $34.52 25 2 x 6 $36.96 15 2 x 7 $45.76 10 2 x 8 $48.37 10 2 x 9 $50.91 10 2 x 10 $53.48 10 2 x 11 $56.07 10 2 x 12 $58.63 10 21 2 x CLOSE $49.36 10 21 2 x 4 $54.27 15 21 2 x 6 $62.15 10 21 2 x 8 $70.36 5 21 2 x 10 $78.55 5 21 2 x 12 $86.47 5 3 x CLOSE $62.69 10 3 x 4 $69.84 10 3 x 6 $80.37 10 3 x 8 $92.95 5 3 x 10 $103.70 5 3 x 12 $113.39 5 4 x CLOSE $89.93-4 x 4 $96.81 5 4 x 6 $111.53 5 4 x 8 $122.75 2 4 x 10 $142.06 2 4 x 12 $156.73 2 6 Revised:
ADAPTER NIPPLES GROOVED AND GROOVED BY THREAD SCH 40 ADAPTER NIPPLES SCH 80 ADAPTER NIPPLES 2 x 3 $42.27 12 2 x 4 $42.27 12 2 x 6 $46.56 12 2 x 8 $50.78 12 2 x 10 $54.58 12 2 x 12 $57.87 12 3 x 3 $63.86 12 3 x 4 $63.89 12 3 x 6 $68.62 12 3 x 8 $76.66 12 3 x 10 $84.56 6 3 x 12 $94.06 6 4 x 4 $84.13 12 4 x 6 $89.32 6 4 x 8 $105.82 6 4 x 10 $118.11 4 4 x 12 $127.59 4 2 x 3 $67.29 12 2 x 4 $67.29 12 2 x 6 $75.87 12 2 x 8 $84.31 12 2 x 10 $91.90 12 2 x 12 $98.49 12 3 x 4 $101.16 12 3 x 6 $111.08 12 3 x 8 $127.16 6 3 x 10 $142.96 6 3 x 12 $161.96 6 4 x 4 $130.37 12 4 x 6 $140.74 6 4 x 8 $173.75 6 4 x 10 $198.33 4 4 x 12 $217.28 4 Revised: 7
SWAGE NIPPLES SCH 40 SWAGE NIPPLES SCH 80 SWAGE NIPPLES 2 x 1 TBE $77.59 12 2 x 1¹ 4 TBE $85.25 12 2 x 1¹ ₂ TBE $68.60 12 2¹ ₂ x 2 TBE $85.10 12 3 x 1 TBE $131.16 12 3 x 2 TBE $100.20 12 4 x 2 TBE $155.29 6 4 x 3 TBE $145.67 6 2¹ ₂ x 2 GXT $88.34 12 2 x 1 GXT $80.61 12 2 x 1¹ ₂ GXT $71.17 12 3 x 1¹ 4 GXT $146.28 1 3 x 2 GXT $103.90 12 4 x 2 GXT $161.16 6 4 x 3 GXT $151.06 6 2¹ ₂ x 2 TXG $88.34 12 3 x 2 TXG $103.90 12 4 x 2 TXG $161.16 6 4 x 3 TXG $151.06 6 2¹ ₂ x 2 GBE $91.57 12 3 x 2 GBE $107.60 12 4 x 2 GBE $167.03 6 4 x 3 GBE $156.45 6 1 x ¹ 4 TBE $48.25 12 1¹ ₂ x 1 TBE $60.15 12 2 x ¹ ₂ TBE $105.32 12 2 x 1 TBE $86.93 12 2 x 1¹ 4 TBE $91.16 1 2 x 1¹ ₂ TBE $86.93 12 2¹ ₂ x 2 TBE $103.59 12 3 x 2 TBE $122.00 6 3 x 2¹ ₂ TBE $122.00 12 4 x 2 TBE $196.64 4 4 x 3 TBE $182.44 4 2 x 1 GXT $90.41 12 2¹ ₂ x 2 GXT $103.59 12 3 x 2 GXT $126.80 6 4 x 2 GXT $204.58 12 4 x 3 GXT $189.66 6 3 x 2 TXG $126.80 12 4 x 2 TXG $204.58 12 4 x 3 TXG $189.66 12 2¹ ₂ x 2 GBE $111.91 12 3 x 2 GBE $131.59 6 3 x 2¹ ₂ GBE $131.59 12 4 x 2 GBE $212.52 12 4 x 3 GBE $196.89 12 8 Revised:
OIL COUNTRY SWAGE NIPPLES Large End Upset Reduced to Regular or Upset PRIMARY DESCRIPTION EACH 2¹ ₂ EUE 8RD x 2 EUE 8RD STD J55 SWAGE NIPPLE $283.32 6 2¹ ₂ UP 8RD x 2LP STD J55 SWAGE NIPPLE $283.32 6 2¹ ₂ UP 8RD x 2 GRV STD J55 SWAGE NIPPLE $296.47 6 3UP 8RD x 2UP 8RD STD J55 SWAGE NIPPLE $370.51 1 3UP 8RD x 2LP STD J55 SWAGE NIPPLE $370.51 1 3UP 8RD x 2¹ ₂ UP 8R STD J55 SWAGE NIPPLE $370.51 1 3UP 8RD x 2¹ ₂ LP STD J55 SWAGE NIPPLE $370.51 1 3GRV x 2UP 8RD STD J55 SWAGE NIPPLE $340.64 1 3GRV x 2¹ ₂ UP 8RD STD J55 SWAGE NIPPLE $340.64 1 2¹ ₂ UP 8RD x 2LP XH SWAGE NIPPLE $360.20 1 TUBING NIPPLES 18" and Shorter Upset and Non-Upset PRIMARY DESCRIPTION EACH 2 EUE 8RD BE x 6 STD J55 TUBING NIPPLE $117.34 12 2UP 8RD x 2LP x 6 STD J55 TUBING NIPPLE $117.34 12 2UP 8RD x 2GRV x 6 STD J55 TUBING NIPPLE $122.34 12 2¹ ₂UP 8RD BE x 6 STD J55 TUBING NIPPLE $173.34 1 2¹ ₂UP 8RD x 2¹ ₂GRV x 6 STD J55 TUBING NIPPLE $180.99 6 2¹ ₂UP 8RD x 2¹ ₂LP x 6 STD J55 TUBING NIPPLE $173.34 6 3UP 8RD x 3GRV x 6 STD J55 TUBING NIPPLE $290.25 1 3UP 8RD x 3 8V x 6 STD J55 TUBING NIPPLE $266.50 1 2UP 8RD x 2LP x 6 XH TUBING NIPPLE $217.42 1 2¹ ₂UP 8RD x 2¹ ₂LP x 6 XH TUBING NIPPLE $326.29 1 API TUBING COUPLINGS 18" and Shorter Upset and Non-Upset PRIMARY DESCRIPTION EACH 2 UP 8RD J55 API TUBING COUPLING POA 1 2¹ ₂ UP 8RD J55 API TUBING COUPLING POA 1 BULL PLUGS PRIMARY DESCRIPTION EACH 2UP 8RD STD BULL PLUG $122.34 12 2¹ ₂UP 8RD STD BULL PLUG $165.50 1 Revised: 9
BULL PLUGS PRIMARY DESCRIPTION EACH 2 S40 RND CARBON STEEL BULL PLUG $61.28 12 3 STD BULL PLUG $114.43 6 4 STD BULL PLUG $148.88 6 2 XH BULL PLUG $82.43 12 3 XH BULL PLUG $136.83 6 4 XH BULL PLUG $194.04 1 TAPPED BULL PLUGS PRIMARY DESCRIPTION EACH 2 STD ¹ ₄ TAP CRBN STL $68.16 12 2 STD ¹ ₂ TAP CRBN STL $68.16 12 2 S80 ¹ ₄ TAP CRBN STL $89.31 12 2 XH ¹ ₂ TAP BULL PLUG $89.31 12 CATAWISSA HAMMER UNIONS FIG. 100 HAMMER UNION FIG. 200 HAMMER UNION FIG. 300 HAMMER UNION 2 $74.21 12 2 ¹/₂ $138.32 8 3 $132.59 6 4 $207.17 2 1 $52.13 36 2* $70.75 14 2 ¹/₂ $199.68 8 3 $195.41 6 4 $234.27 4 *Ductile Iron 2 $114.03 12 10 Revised:
FITTINGS FOR GROOVED END PIPE 90 ELBOW, FIG. 7050 CROSS, FIG. 7068 2 $88.08 18 3 $150.96 8 4 $173.57 4 2 $205.63 1 3 $361.31 1 4 $594.27 1 45 ELBOW, FIG. 7051 2 $88.08-3 $150.96 1 4 $173.57 - TEES, FIG. 7060 2 $126.69 16 3 $176.13 1 4 $266.37 - CAPS, FIG. 7074 2 $75.07 30 2 -¹/₂ TAP $116.09 1 3 $83.97 15 4 $99.97 10 REDUCING TEE, FIG. 7061 3 x 3 x 2 $222.85 1 CONCENTRIC REDUCER (GR X GR), FIG. 7072 2¹/₂ x 2 $99.97 1 3 x 2 $96.56 1 4 x 2 $131.33 1 4 x 3 $153.73 1 CONCENTRIC REDUCER (GRV X THD), FIG. 7076 3 x 2 $128.13 1 DI BODY WITH 316 SS TRIM, FIG. 7500 WITH TWO POSITION HANDLE OR WITH TWO POSITION LOCKING HANDLE 2 POA 3 POA 4 POA Revised: 11
CORPORATE OFFICES 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 Fax: 603-418-2833 E-mail: sales@anvilintl.com CUSTOMER SERVICE CENTERS UNITED STATES Illinois Tel: 708-885-3000 Fax: 708-534-5441 Toll Free: 1-800-301-2701 Texas Tel: 972-871-1206 Fax: 972-641-8946 Toll Free: 1-800-451-4414 Rhode Island Anvil EPS - Engineered Pipe Supports Tel: 401-886-3000 Fax: 401-886-3010 Toll Free: 1-877-406-3108 CANADA Ontario Tel: 519-426-4551 Fax: 519-426-5509 EUROPE AND MIDDLE EAST Tel: +31-53-5725570 Fax: +31-53-5725579 International Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441 MEXICO, PUERTO RICO AND LATIN AMERICA International Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441 REGIONAL DISTRIBUTION CENTERS UNITED STATES Illinois 7979 W. 183rd Street, Unit D Tinley Park, IL 60484 Texas 1401 Valley View Lane, Suite 150 Irving, TX 75061 Pennsylvania 800 Malleable Road Columbia, PA 17512 California 1470 S. Vintage Avenue Ontario, CA 91761 Florida 236 Outlook Point Drive, Suite 100 Orlando, FL 32809 INTERNATIONAL Canada 390 Second Avenue, Simcoe P.O. Box 40 Ontario, Canada, N3Y 4K9 #755 / Printed in USA / 2014 Revision: November 3, 2014 b u i l d i n g c o n n e c t i o n s t h a t l a s t