C E R T I F I C A T E O F C O M P L I A N C E

Similar documents
C E R T I F I C A T E O F C O M P L I A N C E

C E R T I F I C A T E O F C O M P L I A N C E

The implementation timeframe for each new requirement is provided in the details below.

MaxLite L-Form Series

MINIMUM INSPECTION PROCEDURAL GUIDELINES FOR BUILDING ELECTRICAL RECERTIFICATION

TABLE OF CONTENTS - ADDENDUM NO. 3

3M Round Conductor Flat Cable.025" 30 AWG Solid, TPE 3749 Series

MaxLite StaxMAX LED Flood Lights


MaxLite Hazardous Location StaxMAX LED High Output Flood Lights

ELECTRICAL FEE SCHEDULE. Effective October 1, 2013 Revision June 2018

Business Account Service Takeover Authorization Form

CLAVERHAM COMMUNITY COLLEGE

HOG CONFINEMENT QUESTIONNAIRE

STAATSKOERANT, 19 NOVEMBER 2010 No NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)

Product Approval Guide ISSUE 01. Australian Safety Approval

IMPORTANT LETTER Day Moist Ammonia Stress Cracking Test shall be conducted on brass parts containing more than 15 percent zinc.

UL TEST REPORT AND PROCEDURE

BIDDER'S PROPOSAL TO THE HONORABLE MAYOR AND MEMBERS OF THE CITY COUNCIL

Excerpt From FCC USOA Part-32

A Discussion Paper of Principles for Provincial Licensing of Electrical Contractors and Master Electricians

3M Round Conductor Flat Cable.050" 28 AWG Stranded, FEP 3601 Series

SOUTH AFRICAN TELECOMMUNICATIONS REGULATORY AUTHORITY (SATRA) VOLUME 3 CHART OF ACCOUNTS AND COST ALLOCATION MANUAL (COA/CAM)

BUILDING SUBCODE FEES:

COVER PAGE. Bid Proposal # 1902 WIRE & CABLE ELECTRIC DISTRIBUTION

LOS ANGELES COMMUNITY COLLEGE DISTRICT PROPOSITION AA BOND CONSTRUCTION PROGRAM

The braiding is tight and dense, providing excellent coverage over small wires, cables, hoses, tubes and pipes.

3M Molded Assembly 2 mm x 2 mm 2M Series

TOWNSHIP OF FRANKLIN O-6-18 ORDINANCE AMENDING CHAPTER OF THE CODE OF THE TOWNSHIP OF FRANKLIN- CONSTRUCTION PERMITS

User Manual. Plenum DVI Dual Link Male/Male Cable ATP-14009

ADDENDUM. xdsl (ADSL & SDSL)

ASSOCIATION OF APARTMENT OWNERS OF HALE KAMAOLE

Intertek Testing Services NA, Inc.: Grant of Expansion of Recognition. AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

PROPOSAL FOR JEWELERS BLOCK POLICY. To be effected with

Frequently Asked Questions for the Transition from UL 508C to UL

Building Permit Fees

LAKE WALES CHARTER SCHOOLS, INC. HILLCREST ELEMENTARY SCHOOL A CHARTER SCHOOL AND COMPONENT UNIT OF THE DISTRICT SCHOOL BOARD OF POLK COUNTY, FLORIDA

Subject: Addendum No. 1 Project #C CCE Parking Lot Replacement Phase 2 Robert Bishop Drive 4380 Richmond Road, Highland Hills, Ohio 44122

Proposal form. Personal Information Name of the Proposer: Telephone: Fax:

Restaurant Supplemental Application

Regulatory Reform (Fire Safety) Order 2005: An Insurer s View. Mark Newton Property Technical Manager Royal & Sunalliance Insurance

DRAFT. Los Angeles Community College District

1. The fee for plan review shall be due upon completion of subcode review.

CITY OF ROCK HILL, SOUTH CAROLINA REQUEST FOR PROPOSAL PORTABLE GENERATORS AUGUST 28, 10:00 AM BACKGROUND BID REQUEST


Union County. Invitation for Bid # Agricultural Center Ceiling Replacement

Hydro One Networks' Request for Leave to Sell Distribution Assets to PowerStream Inc.

PROPOSAL FORM. Cleaning Industry Insurance - Property. Underwriting Agent. Lloyd s Broker

Cost Estimation for Regional Transmission Overlay Study (RTOS)

Private Circuit Service Specific Terms and Conditions

Chapter 9. Cost Management

UAA ANSEP ULA RENOVATION Anchorage, Alaska VOLUME I BIDDING & CONTRACT DOCUMENTS

Getting Started Is Easy

Factors for calculating annual allowance pension debit for members below age 60

ARTISAN ACE-14 POLICY APPLICATION

ADDENDUM #1 RFQ M1201M. 06/07/13 Please replace Chiller Maintenance Specifications with the attached Chiller Maintenance Specifications.

RULES AND REGULATIONS FOR ELECTRIC SERVICE. These Rules and Regulations, approved by the Florida Public Utilities Commission, constitute the Company's

Recognition of Deferred Tax Assets for Unrealised Losses (Amendments to MFRS 112) Deductible temporary differences

NORTHERN INDIANA PUBLIC SERVICE COMPANY Attachment GG True-Up Adjustment For the Year Ended December 31, 2014

Notice of Award-Contract Information Printing: Monthly Winning Numbers Flip Charts-Lottery Commission (T-2044)

Interior Electrical Line Plus Terms and Conditions

Wallingford Public Schools Strategic Plan Date: December 1, 2016 Strategic Plan Area: Facilities

Product Series : Audio Sound Processor for mini compo, micro compo, TV, radio cassette recorder

CITY OF SEWARD SHORT TERM RENTAL PERMIT APPLICATION

ARKANSAS PUBLIC SERVICE COMMISSION

JEWELLERS BLOCK POLICY PROPOSAL FOR INSURANCE

BUILDING PERMIT FEES

PROPOSAL FORM. Property All Risk

Type 943C, Polypropylene Capacitors, for High Pulse, Snubber Very High dv/dt for Snubber Applications

3M Shunt 2.54 mm 969 Series

GPSPS, Inc. Michigan Tariff No. 1 Original Page No. 1. GPSPS, Inc.

OAKSTEAD COMMUNITY DEVELOPMENT DISTRICT PASCO COUNTY, FLORIDA FINANCIAL REPORT FOR THE FISCAL YEAR ENDED SEPTEMBER 30, 2012

17th Edition Iee Wiring Regulations Explained And Illustrated Iee Wiring Regulations Explained And Illustrated Scadden


3M Mini Serial Attached SCSI (minisas) Connector Assembly Internal Right Angle Combo Connector

Interstate/International Rates, Terms and Conditions 7150 N. Park D, Suite 500 Original Title Page Pennsauken, NJ 08109

Reinventing. an Enduring Franchise. Paul Steece Vice President and General Manager Electrical Markets Division. September 9, 2008

INTERNATIONAL WIRE GROUP INC

LEGAL NOTICE INVITATION FOR FORMAL BID IFB For. Veterans Tribute Park Maintenance Shed Electrical and Low Voltage. For

ADDENDUM 1 TO THE CONSTRUCTION DOCUMENTS FOR HALLE WAREHOUSE - 4TH FLOOR HVAC

CA-NLH-59 Depreciation Methodology and Asset Service Lives Page 1 of 3

Derivation of State Graphs and Tables UNIT 14 DERIVATION OF STATE GRAPHS AND TABLES. Designing a Sequential Circuit. Sequence Detectors

KENTUCKY FAIR PLAN APPLICATION FOR HOMEOWNERS COVERAGE FORM HO-8

Substantial Product Hazard List: Seasonal and Decorative Lighting Products. SUMMARY: The Consumer Product Safety Commission ( CPSC or Commission ) is

SPIRIT TELECOM LIMITED ABN

UNDERWRITING GUIDELINES FOR TECHNOLOGY MANUFACTURERS SEGMENT

GENERAL TARIFF. 1) This item is subject to the terms and provisions of Part A of this Tariff.

Summary of Consolidated Financial Results for the Fiscal Year Ended March 31, 2017 (FY2016)

ARMED SERVICES BOARD OF CONTRACT APPEALS. Appeal of -- ) ) Performance Construction, Inc. ) ASBCA No ) Under Contract No. N C-0143 )

One and two family residences... $ Mobile Homes... $73.73 Commercial Building... $ All other miscellaneous applications... $44.

A Portfolio of Best-in-Class Industrial Distributors. 6 th November, 2012

Counterfeit products in fires An LFB perspective

Project Manual For NMIMT Jones Hall Renovation

LOS ANGELES COMMUNITY COLLEGE DISTRICT MEASURE J BOND CONSTRUCTION PROGRAM

RISK SPECIALISTS COMPANY 200 STATE STREET, BOSTON, MA ALARM CONTRACTORS PROGRAM

P.S.C MO. No. 1 CenturyLink Communications, LLC Catalog No. 1 (T) Fourth Revised Title Sheet (T) Cancels Third Revised Title Sheet (T) CATALOG

FOREST LAKES CONDOMINIUM ASSOCIATION, INC. NAPLES, FLORIDA FINANCIAL STATEMENTS YEAR ENDED DECEMBER 31, 2016

FOR CONSULTATION ANNEX A FINANCIAL TRANSACTIONS REPORTING (WIRE TRANSFERS) REGULATIONS, 2015 PART I PRELIMINARY

Samoset at Winnipesaukee Condominium Association. Estimated Financial Results for Operating & Reserve Budget for 2012

Transcription:

Report Reference E22244-19670220 2014-FEBRUARY-06 COMPONENT - APPLIANCE WIRING MATERIAL See Addendum Page UL 758 - Appliance Wiring Material. Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. Page 1 of 1

Report Reference E22244-19670220 2014-FEBRUARY-06 the product as specified on this certificate were tested according to the current UL requirements SINGLE-CONDUCTOR THERMOPLASTIC-INSULATED WIRE: 3068, 3069, 3070, 3071, 3074, 3075, 3101, 3113, 3122, 3123, 3125, 3126, 3127, 3128, 3132, 3133, 3134, 3135, 3136, 3137, 3139, 3143, 3144, 3172, 3176, 3211, 3212, 3213, 3214, 3215, 3216, 3218, 3219, 3220, 3221, 3222, 3223, 3224, 3231, 3239, 3251, 3252, 3253, 3254, 3257, 3262, 3268, 3270, 3271, 3303, 3304, 3318, 3322, 3333, 3362, 3367, 3404, 3408, 3410, 3479, 3507, 3512, 3513, 3514, 3517, 3518, 3519, 3522, 3527, 3529, 3530, 3535, 3536, 3550, 3568, 3573, 3576, 3585, 3586, 3604, 3605, 3634, 3636, 3637, 3638, 3640, 3641, 3642, 3643, 3644, 3771, 3772, 3787, 3788, 3789, 3801, 3802, 3803, 3804, 3805, 3806, 3807, 3808, 3907, 3908, 3909, 3910, 3919, 3946 Page 2 of 2

Report Reference E22244-19781103 2014-JANUARY-28 COMPONENT - APPLIANCE WIRING MATERIAL See Addendum Page ANSI/UL 758, Appliance Wiring Material. Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. Page 1 of 1

Report Reference E22244-19781103 2014-JANUARY-28 the product as specified on this certificate were tested according to the current UL requirements SINGLE-CONDUCTOR THERMOPLASTIC-INSULATED WIRE; 4201, 4226, 4251, 4276, 4202, 4227, 4252, 4277, 4203, 4228, 4253, 4278, 4204, 4229, 4254, 4279, 4205, 4230, 4255, 4280, 4206, 4231, 4256, 4281, 4207, 4232, 4257, 4282, 4208, 4233, 4258, 4283, 4209, 4234, 4259, 4284, 4210, 4235, 4260, 4285, 4211, 4236, 4261, 4286, 4212, 4237, 4262, 4287, 4213, 4238, 4263, 4288, 4214, 4239, 4264, 4289, 4215, 4240, 4265, 4290, 4216, 4241, 4266 4291, 4217, 4242, 4267, 4292, 4218, 4243, 4268, 4293, 4219, 4244, 4269, 4294, 4220, 4245, 4270, 4295, 4221, 4246, 4271, 4296, 4222, 4247, 4272, 4297, 4223, 4248, 4273, 4298, 4224, 4249, 4274, 4299, 4225, 4250, 4275, 4300, 4301, 4326, 4351, 4376, 4302, 4327, 4352, 4377, 4303, 4328, 4353, 4378, 4304, 4329, 4354, 4379, 4305, 4330, 4355, 4380, 4306, 4331, 4356, 4381, 4307, 4332, 4357, 4382, 4308, 4333, 4358, 4383, 4309, 4334, 4359, 4384, 4310, 4335, 4360, 4385, 4311, 4336, 4361, 4386, 4312, 4337, 4362, 4387, 4313, 4338, 4363, 4388, 4314, 4339, 4364, 4389, 4315, 4340, 4365, 4390, 4316, 4341, 4366, 4391, 4317, 4342, 4367, 4392, 4318, 4343, 4368, 4393, 4319, 4344, 4369, 4394, 4320, 4345, 4370, 4395, 4321, 4346, 4371, 4396, 4322, 4347, 4372, 4397, 4323, 4348, 4373, 4398, 4324, 4349, 4374, 4399, 4325, 4350, 4375, 4400, 4401, 4426, 4451, 4476, 4402, 4427, 4452, 4477, 4403, 4428, 4453, 4478, 4404, 4429, 4454, 4479, 4405, 4430, 4455, 4480, 4406, 4431, 4456, 4481, 4407, 4432, 4457, 4482, 4408, 4433, 4458, 4483, 4409, 4434, 4459, 4484, 4410, 4435, 4460, 4485, 4411, 4436, 4461, 4486, 4412, 4437, 4462, 4487, 4413, 4438, 4463, 4488, 4414, 4439, 4464, 4489, 4415, 4440, 4465, 4490, 4416, 4441, 4466, 4491, 4417, 4442, 4467, 4492, 4418, 4443, 4468, 4493, 4419, 4444, 4469, 4494, 4420, 4445, 4470, 4495, 4421, 4446, 4471, 4496, 4422, 4447, 4472, 4497, 4423, 4448, 4473, 4498, 4424, 4449, 4474, 4499, 4425, 4450, 4475, 4500 Page 2 of 2

Report Reference E22244-19190501B 2014-JANUARY-28 COMPONENT - APPLIANCE WIRING MATERIAL See Addendum Page ANSI/UL 758, Appliance Wiring Material. Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Recognized Component Mark on the product. Page 1 of 2

Report Reference E22244-19190501B 2014-JANUARY-28 the product as specified on this certificate were tested according to the current UL requirements SINGLE-CONDUCTOR THERMOPLASTIC-INSULATED WIRE; 5035, 5048, 5096, 5107, 5127, 5128, 5167, 5180, 5196, 5214, 5251, 5253, 5254, 5256, 5257, 5259, 5294, 5304, 5315, 5324, 5328, 5329, 5334, 5335, 5347, 5359, 5360, 5376, 5377, 5390, 5400, 5446, 5470 Page 2 of 2

Certificate Number 20140127-E14998 Report Reference E14998-19670213 2014-JANUARY-27 FIXTURE WIRE Types SF-1, SF-2, SFF-1 and SFF-2 UL 66, Fixture Wire Only those products bearing the UL Listing Mark should be considered as being covered by UL's Listing and Follow-Up Service. The UL Listing Mark generally includes the following elements: the symbol UL in a circle: with the word LISTED ; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) as indicated in the appropriate UL Directory. Look for the UL Listing Mark on the product. Page 1 of 1

Certificate Number 20140127-E14998 Report Reference E14998-19670213 2014-JANUARY-27 FIXTURE WIRE Types SF-1, SF-2, SFF-1 and SFF-2 UL 66, Fixture Wire Only those products bearing the UL Listing Mark should be considered as being covered by UL's Listing and Follow-Up Service. The UL Listing Mark generally includes the following elements: the symbol UL in a circle: with the word LISTED ; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) as indicated in the appropriate UL Directory. Look for the UL Listing Mark on the product. Page 1 of 1

Certificate Number 20140127-E241484 Report Reference E241484-20040127 2014-JANUARY-27 POWER-LIMITED FIRE ALARM CABLE Type FPL, FPLR (60 C to 90 C). UL 1424, Cables for Power-Limited Fire-Alarm Circuits Only those products bearing the UL Listing Mark should be considered as being covered by UL's Listing and Follow-Up Service. The UL Listing Mark generally includes the following elements: the symbol UL in a circle: with the word LISTED ; a control number (may be alphanumeric) assigned by UL; and the product category name (product identifier) as indicated in the appropriate UL Directory. Look for the UL Listing Mark on the product. Page 1 of 1