THE NATIONAL INDUSTRIES (LICENSING AND REGISTRA- TION) ACT, 1967 (No. 10 OF 1967) REGULATIONS Made under section 28 THE NATIONAL INDUSTRIES REGULATIONS, 2000 Short title Interpretation Act No. 10 of 1967 Application for industrial licence or certificate of registration Application to be on a prescri bed Form 1 1. These Regulations may be cited as the National Industries Regulations, 2000. 2. In these Regulations, unless the context otherwise requires- "Act" means the National Industries (Licensing and Registration) Act, 1967; "Board" means the Board appointed by the Minister under section 10A of the Act; "prescribe" in relation to forms means prescribed in the Schedule to these Regulations; "Registrar" means the Registrar of industries: 3. Every application for an industrial licence shall be submitted through the Board, and in case of application for a certificate of registration to the Registrar or Assistant Registrar. 4. Every application for a first grant or renewal of an industrial licence or a certificate of registration shall be in a prescribed form.
5. Every industrial licence shall be in the prescribed form. 6. Every regulation certificate shall be in the prescribed form. 7. Every licence shall be authenticated by an official seal. 8. The project with a fixed investment cost not exceeding one hundred million shillings shall be issued with a certificate of registration and a project with fixed investment exceeding one hundred million shillings shall be issued with an industrial licence. 9. The fee for a certificate of registration shall be US$ four hundred or its equivalent in Tanzania shillings and the fee for an industrial licence shall be US$ five hundred or its equivalent in Tanzania shillings. 10. Where the Registrar- (a) is satisfied that a holder of a licence issued in respect of a project has not, within the period of three years from the date of issue of the licence, implemented that project; and (b) &er requiring the person referred to in paragraph (a) to show cause why the licence issued in respect of the project shall not be cancelled, is satisfied that there is no sufficient cause, he may cancel the licence issued in respect of that project and shall report the matter to the Board. l1.+l) Every person who holds a valid temporary industrial licence or certificate of registration shall submit, in the case of temporary industrial licence to the Board, and in the case of registration certificate, to the Registar, a progress report once in every calender year. Industrial licence to be in prescribd Form 2 Registration Certificate to be in prescri bed Form 3 Licence to be on a seal Project with fixed investment Registration certificate Fee Registrar to cancel licence Submission of annual progress report
(2) Every progress report shall be in a prescribed form. (3) Any person who contravenes the provisions of paragraph (l) of this regulation commits an offence and upon conviction is liable to a fine of fifty thousand shillings payable to the Registrar of Companies. Transfer of industrial licence Meeting of the Board Appeals to Minister 12. Every application for the transfer of an industrial licence shall be in the prescribed form. 13.--(l) The Board shall meet at least four times in a year. (2) Without prt:judiee.to the generality of subregulation (1) the Chairman may at any time call an emergency meeting. 14.--(l) The time within which a person may appeal to the Minister under the provisions of subsection (1) of section 24 of the Act shall be thirty days from the date of the communication of that person of such decision, revocation or variation. 2) The Minister may for any good or sufficient reason extend the time for the bringing of the appeal. Revocation G.N. No. 20 of 1991 15. The National Industries Regulations, 199 1 are hereby revoked. SCHEDULE Form l THE UNITED REPUBLIC OF TANZANIA THE NATIONAL INDUSTRIES (LICENSING AND REGISTRATION) ACT ACT NO. 10 OF 1967
SHERIA YA KUSAJTZI NA KUSIMAMIA WANDA VYA TAIFA NA. 10 YA MWAKA 1967 (APPLICATION FORM FOR INDUSTRIAL LICENCE CERTIFICATE OF REGISTRATION) Made under sections 4 and 12 1. Name and Address of the Company (Jina la Anwani ya Kampuni... 2. Name of share holders and nationality (Majina ya wenye hisa na uraia wao).................. 3. What other business/industry in which you hold shares (Taja biashara au viwanda ambavyo una hisa) 4. Company Registration Number (Namba ya usajili wa Kampuni)...... 5. Contact, Telephone... E-mail..... 6. Feasibility study carried out by...... (Mchanganuo umefanywa na). 7. Anwani (Address)... S. Nature of industry e.g. chemical, engineering, fooa processing etc.............
Type of goods (Aina ya bidhaa) Capacity per year (Uwezo kwa mwaka) Ex-factory price (Bei ya kiwandani kila zao) 9. (a) (i) Is the industry export oriented? YesNo. Je, Kiwanda kitazalisha kwa ajili ya mauzo ya nchi za nje tu? Ndiyo Hapana) (ii) (iii) 1s the Industry import oriented? YesNo. Je, Kiwanda kitazalisha vifaa ambavyo kwa sasa vinaag~zwa toka nchi za nje? NdiyoMapana. Je, kiwanda kitazalisha vifaa kwa ajili ya mauzo katika nchi za nje na kwa ajili ya matumizi ya hapa nchini? Ndiyomapana. (b) Estimate of Annual sales in Tanzania (Actual Units) (Makadirio ya mauzo katika Tanzania kwa mwaka)....... 10. Estimates of Annual exports (Actual Units) (Makadirio ya mauzo nchi za nje kwa mwaka)... 11. Potential demand in Tanzania per annum...... (Mahitaji ya Tanzania kwa mwaka) 12. Kiasi kinachoagizwa toka nje ya nchi kwa mwaka... (Present imports p.a.? 13. Location of the proposed factory (number of plot, place) (Mahali kitakapojengwa Kiwanda. Taja mahali. Namba ya Kiwanja. mahali. Wilaya, Mkoa) 14. (Level of Investment (Total) T.Shs. Kiwango cha Mtaji (jumla T.Shs.)...,... (a) Building etc. T.Shs Majengo T.Shs... (b) Machinery & Equipment T.Shs. (Mitambo T.Shs.)... (c) Working capital for 1 year T.Shs. Gharama za uendeshaji (kwa mwaka) T.Shs...
15. Working capital T.Shs. (Mtaji utapatikana wapi) T.S~S...... (a) Nchini-Fedha zenu Fedha za mashirika ya fedha............ (b) Mikopo...... 16. Raw materials per annum in units, tons (Mali ghafi zinazohitajika kwa mwaka)...... Source Type of Raw Physical Unit PricelUnit Totai Cost T.Shs. Materials (a) (b) (C) Local Imported Total (a) (b) 17. Local of raw material Mahali yalipo mali ghafi...... 18. Estimate date of production would begin? (Lini uzalishaji wa bidhaa utaanza)...... 19. Production process (Njia ya uzalishaji wa bidhaa) 20. Proposed marketing system (Aina nyingine ya mpango wa mauzo) 2 1. Other proposed export market. (Aina nyingine soko la nje)... 22. Uajiri jumla (Labour force MM?.... (a) Tanzanians (htailzarila)
(b) Foreigners (Wageni) 23. Any provisions for training local (Mpango wa mafunzo kwa wazalendo)... (a) Wataalam/ProftssionaIs (b) Technical staff Specify type (Aina ya mafundi) (c) Administrative Staff (Watumishi wa Utawala) (d) Mengineyo 24. Facilities required (Vifaa vinavyohitajika) (a) Land (acres) Ardhi (Eka)... (b) Power per year (electricity) (Umeme kwa mwaka)... (C) Fuel (units) per year...... (d) Water (units) per year (Maji kwa mwaka)...... 25. E.I.A. Environmental Impact Assessment (~pproval) Hatua za kuhifadhi mazi11gil.a....... (a) Effluent disposal and water treatment facilities (Uondoaji uchafu pamoja na usafishaji maji)...... (b) Rate of disposal effluent units per year (Kiwango cl~a ~rondoaji uchaftr kwa rnwaka)......
I certie that the information given above is correct (Natliibitisha kuwa maelezo yaliyopo ~ LILI 11; saliihi) Date:....... Tarehe:...... (Sig~iatture of Applicant)... (Sahilii ya Mwombaji) Form 2 THE UMTED REPUBLIC OF TANZANIA The National Industries (Licensing and Registration) Act. 1967 (Sections 11. 12 R: 15) INDUSTRIAL LICENCE Licence No:... ISIC Class No:...... Issued at:...... Name of Firm and Address:... This licence permits operating a factory to manufacture for sale:...... Subject to the following conditions: (i) That the bearer is obliged to subniit annual progress reports on the Project: (ii) That the prodiicts produced shall conform to the standard accepted by Tanzania Bureau of Standards: (iii) Others:......... Location of the Factory:... Date... Registrar Ministry of Indust~y. and Trade
Form 3 THE UNITED REPUBLIC OF TANZANIA MINISTRY OF INDUSTRY AND TRADE (The National Industries (Licensing arid Registration) (Sections 5. 6. 7 & 8) CERTIFICATE OF REGISTRATION.. Reg~stratlon No... ISIC Class No... Issued at:..... Nanie ot F~rm and Address:......... The registration is for a factory to prodt~ce for Sale: Subject to the following conditions: (i) That the products produced shall confor111 to the standards Accepted bv Tanzania Bureau of Standards. Location of Factory:... Date... Registrar Ministn. of in dust^?. and Trade Fornl -I THE UNITED REPUBLIC OF TANZANIA THE NATIONAL INDUSTRIES (LICENSING AND REGISTRATION) ACT. 1967 PROGRESS REPORT FOR REGISTRAT1ON:LICENSED INDUSTRIES 1. Name and address of the firm:... 2. Nature of Industry:...... 3. Registration Certificate;Licerice No...... 4. Has land been acquired? Yes~No 5. Machinery iliiported Items G. Raw Material Inlported:
7. Construction and Civil Works - What stage is attained?............... 8. Level of Investment:- (a) Total Planned... (b) Total actual to date:... 9. Labour force:- (a) Total Planned:... (b) Actual to date:... 10. Type of goods Capacity 24 Actual Output Pricefunit Value of Roduced per year Hours Unit Unit Quantity Ex-factory Output Shs. Quantity 11. Raw Materials Local Imported Unit PriceIUnit Values Shs. Quantity C.I.F. One month Trial production 12. Bottlenecks faced of any and proposed remedial action... i......... Date:..... Signature of Investor/Promoter Dar es Salaam, 30"' June, 2000 I. SIMBA, Minister for Industry and Trade