Configuring the Dolby Conference Phone 3.0.x with Unify OpenScape Enterprise Express 8.0.x April 29, 2016 This product is protected by one or more patents in the United States and elsewhere. For more information, including a specific list of patents protecting this product, please visit www.dolby.com/patents. Dolby, Dolby Voice, and the double-d symbol are registered trademarks of Dolby Laboratories. 2016 Dolby Laboratories, Inc. All rights reserved. Dolby Laboratories, Inc. 1275 Market Street San Francisco, CA 94103-1410 USA Telephone 415-558-0200 Fax 415-863-1373 http://www.dolby.com
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 2 Table of Contents Information about this guide... 3 Prerequisites... 3 Configuration parameters... 4 Adding a new subscriber... 5 Registering the Dolby Conference Phone to Unify OpenScape Enterprise Express... 9
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 3 Information about this guide This is a simple, straightforward guide to configuring your Dolby Conference Phone 3.0.x for use with Unify OpenScape Enterprise Express 8.0.x. This guide presumes an enterprise network environment and does not cover provisioning of the service. Prerequisites Take a look at what is required in this section and have that information available before you start. Read the appropriate Unify OpenScape Enterprise Express documentation for information on specific network requirements. Note: Your local system administrator can provide these details. You will need to know the following before you can complete the steps outlined in this document: Credentials for authenticating the Dolby Conference Phone with the Unify server: o Subscriber user name o Subscriber password The subscriber directory number assigned to the Dolby Conference Phone. IP addresses for the following: o Primary Unify OpenScape Enterprise Express Platform server o Secondary Unify OpenScape Enterprise Express Platform server Note: Network Address Translation (NAT) is not supported by the Dolby Conference Phone. Therefore, the Unify OpenScape Enterprise Express Platform servers should be on the same side of the organization firewall as the Dolby Conference Phones.
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 4 Configuration parameters The following table maps the Unify OpenScape Enterprise Express Platform configuration to the Dolby Conference Phone configuration parameters. Unify OpenScape Enterprise Express Platform Configuration Dolby Conference Phone Configuration Parameter Required/Optional User name Sip.Credential.Name Required Password Sip.Credential.Password Required Directory number Sip.Account.UserName Required Primary (OSS) server IP address (or outbound proxy) Sip.Pbx.OutboundProxy1 Required Secondary (OSS) server IP address (or outbound proxy) Sip.Pbx.OutboundProxy2 Optional
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 5 Adding a new subscriber You must add a new subscriber in order to set up a SIP phone extension/account for the Dolby Conference Phone. To create a new subscriber: 1. Log in to the Unify Common Management Platform with the appropriate credentials. 2. Click OpenScape Voice. 3. On the OpenScape Voice page, click Business Group.
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 6 4. Select the branch office from the drop- down menu. 5. Select Members > Subscribers and then click Add.
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 7 6. Complete the subscriber information. a. Click Directory Number and select the number from the display. b. Set the type of number: public or private. c. Select the time zone and language. d. Set External Caller ID and Display Name, or leave at default setting. e. Specify appropriate routing information and attributes. 7. Verify and update the Connection settings. a. Select the Type (i.e., dynamic, static). b. Select the Transport Protocol. c. Select the Associated Endpoint.
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 8 8. Update the Security settings. a. Enter the Realm; in the example above, it is dolby- labs. b. Enter the User Name. c. Enter the Password. d. Confirm the Password. 9. Add a Feature Profile for your new subscriber and check the appropriate settings. 10. Add accounting information, as shown. 11. Click Save to save all your changes.
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 9 Registering the Dolby Conference Phone to Unify OpenScape Enterprise Express Note: The following procedure uses the web interface. 1. Log in the web user interface with the device IP address (for example, https://a.b.c.d). 2. Enter the default credentials: Username = admin Password = 1739 3. Select Settings > IP PBX Settings > Account. 4. Change the Account settings as shown: Display Name: Dolby Voice (but you can rename this to anything that makes sense for your organization) Extension Number/Address: Extension number (mandatory) Display Number: Extension number Transport Type: Auto (works with TCP and UDP) Secure Media: Mandatory
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 10 Transport Port: 5060 5. Next, change the Server settings as shown: Primary Call Server/Outbound Proxy: IP address of your OSS (Common Management Platform) Primary Server/Outbound Proxy port: 5060 Optional: If you have a secondary (failover) server available, enter the details in the Secondary Call Server/Outbound Proxy field Set Transport Type to match your selection in the Connection settings of the previous procedure Note: Ensure you are adding the correct Primary/Secondary account details. 6. Update the credentials (these settings are mandatory for digest authentication): a. Enter the Subscriber User Name in the User Credential Name field. b. Enter the Communication Profile password you created in the User Credential Password. c. Enter the Server realm you created or add an *(Asterisk) to cover any string for this field.
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 11 7. Confirm the password and Save. If the information entered is correct, the phone registers with the Session Manager. 8. To verify the registration, go to Status > System > Device (see the image on the next page for an example).
Configuring the Dolby Conference Phone with Unify OpenScape Enterprise Express 12