E-Auction. For. Procurement of Desktop & Laptop. (Reference No. (n)code\ \05)

Similar documents
Tender for Supply and installation of Desktop Computers SECTION I

GOVERNMENT OF KARNATAKA COMMERCIAL TAXES DEPARTMENT. No. EFS/CR.31 /11-12 Dated: TENDER NOTIFICATION

INVITATION FOR QUOTATION. TEQIP-III/2018/mecj/Shopping/4

Central University of Orissa

Pakistan International Airlines Procurement Logistics Department Commercial Purchases Section Tel:

TENDER DOCUMENT FOR SUPPLY OF 155 (One Hundred & Fifty Five) No.s OF COMPUTERS ON BUYBACK BASIS

Vivekananda Institute of Professional Studies AU-Block, Outer Ring, Pitam Pura, New Delhi

U.T. Administration of Daman and Diu Office of the Principal, Technical Training Institute, Moti Daman

Checklist for bidders/ applicants

REQUEST FOR PROPOSAL (RFP)

Limited Tender Enquiry for Workstation (Single Bid System)

TENDER DOCUMENT FOR Procurement of Computers/Workstations of NIFT Campus, Chennai. Receipt No & Date of issue: Tender Form issued to:

TENDER FOR SUPPLY OF LAPTOPS AT STPI NOIDA MODE OF TENDERING: SEALED TWO-BID SYSTEM 1. DATE & TIME OF PRE-BID MEETING : 12/09/2014 ; 12:30 HRS

TENDER DOCUMENT MAINTENANCE OF PROXY SERVER NATIONAL INSTITUTE OF PUBLIC FINANCE AND POLICY. New Delhi

GUJARAT ENERGY RESEARCH & MANAGEMENT

JAMMU AND KASHMIR STATE FINANCIAL CORPORATION (Incorporated under the State Financial Corporation s Act 1951)

INVITATION FOR QUOTATION

CENTRAL UNIVERSITY OF RAJASTHAN NH-8 Jaipur-Ajmer, Bandarsindri, Kishangarh, Dist. Ajmer

Devi Ahilya Vishwavidyalaya, Indore Nalanda Campus, RNT Marg Indore

INVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT

INDIAN STATISTICAL INSTITUTE

Ref: PURC-MISC-COMPU(S)/2062/IT/(S)/13/NIOH Dated: N.B Please scroll down for documents related to NIT, Corrigendum and other information.

MAHARASHTRA ELECTRICITY REGULATORY COMMISSION

Tender Notice. For. Purchase of Laptops

Tender Reference Number: MMTC/CO/COMP/PUR-PC-PRN/ /1299 Dated: 27/01/2017. For Supply of

INDIAN STATISTICAL INSTITUTE 203 Barrackpore Trunk Road Kolkata

VIRTUAL UNIVERSITY OF PAKISTAN M.A. Jinnah Campus, Defence Road, off. Raiwind Road, Lahore TENDER DOCUMENT

LIMITED TENDER NOTICE

RFP FOR PROCUREMENT: ATM UPGRADE (Hardware and Software) for EMV Compliance

Request for Quotation to Supply of

Tender No. GERMI/RE4/2018/009. GUJARAT ENERGY RESEARCH AND MANAGEMENT INSTITUTE INVITES Issue Date:... April, 2014 LAPTOPS

KHARAGPUR Enquiry No.: IIT/KGP/CSE/PDG/SG/Tender/EQ-DesktopPC/ /01 Date: Yours faithfully, Prof.

DEPARTMENT OF GEOGRAPHY PANJAB UNIVERSITY, SECTOR-14, CHANDIGARH

Bank Response to Prebid Queries for for PC& DVD Ref no. RFP No IDBI/Pcell/RFP18 19/034 dated 3rd Jan 2019

TENDER FOR COMPUTER WORKSTATIONS WITH GRAPHIC CARDS FOR THE INSTITUTE AT OKHLA PHASE-III, NEW DELHI

Limited Tender Enquiry for Workstations under DST-SERB Project (Single Bid System)-Extended

CENTRAL UNIVERSITY OF KASHMIR Nowgam Campus-II, Near Puhroo Crossing, Srinagar

TENDER DOCUMENT FOR. Name of the Tenderer: - Address of Tenderer: - On behalf of Director General, CERT-In. Authorized Signatory

नव न म ष एव अन प रय क त ज व - प रस स करण क द र (स o आईo एo ब o)

E-TENDER DOCUMENTS FOR SUPPLY AND INSTALLATION OF DESKTOPS & WORKSTATIONS.

INVITATION FOR QUOTATION. TEQIP-III/2018/uict/Shopping/10

PLEASE QUOTE PRICES FOB DESTINATION TO BE DELIVERED TO ITEM DESCRIPTION/SPECIAL INSTRUCTIONS QUANTITY UNIT PRICE EXTENDED PRICE

TENDER FOR COMPUTER WORKSTATION FOR THE INSTITUTE AT OKHLA PHASE-III, NEW DELHI (Tender no. IIITD/S&P/IT/Computer Workstation/30/ )

QUOTATION NOTICE. Quotation No: and Date IT/CP/ dated

INDIAN STATISTICAL INSTITUTE 203 Barrackpore Trunk Road Kolkata

SUPPLY & INSTALLATION OF COMPUTER SYSTEMS, UPS & PRINTER

Indian Institute of Technology Bhilai GEC Campus, Sejbahar, Raipur , Chhattisgarh, India

Short Term E-tender Notice for Internet Lease Line

We request you to submit your offer for the supply of Computer Desktops 5 Nos & Laptops 1 No as per our following specification,

at 16:00 Hrs (Indian time)

YASHWANTRAO CHAVAN ACADEMY OF DEVELOPMENT ADMINISTRATION (YASHADA) RAJBHAWAN COMPLEX, BANER ROAD PUNE

Tender Notice. Tender No. Particular EMD(Rs.) Supply Computational Equipments for Anchor Institute Lab. 30 th May, 2018 up to 4:00 pm at Institute

INVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT

M.P. STATE AGRO INDUSTRIES DEVELOPMENT CORPORATION LIMITED: Panchanan, 3rd Floor, Malviya Nagar, Bhopal

Industrial Extension Bureau

Procurement of Licences of Business Objects BI Platform

INDIAN STATISTICAL INSTITUTE 203 Barrackpore Trunk Road Kolkata

Pre Bid Clarifications

INVITATION FOR TENDER FOR SUPPLY OF DEEP LEARNING RACK SERVER

APPAREL EXPORT PROMOTION COUNCIL

INVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT

INDIAN STATISTICAL INSTITUTE

Invitation to Bid For 100 PC Workstations

भ क अ न प - भ रत य कदन अन स ध न स स थ ICAR INDIAN INSTITUTE OF MILLETS RESEARCH र ज न द र, ह दर ब द/Rajendranagar, Hyderabad

R E Q U E S T F O R B I D. UNIFIED SCHOOL DISTRICT NO POYNTZ AVENUE MANHATTAN, KS

No: REC/IT/COMPUR (laptop)/93/01 Date: 15/04/2014

UGC- Human Resource Development Centre

Request for Quotations (Supply of Computer, UPS, Printer, USB Dongles, & Soft wares) Project: TAF-Education/SEA II Project

INVITATION FOR QUOTATION. DIC/UIET/2016 Date: Workstation and Printer To,

CENTRAL MINE PLANNING & DESIGN INSTITUE LTD. REGIONAL INSTITUTE-VI, P.O. JAYANT DISTT. SINGRAULI (M.P.) TENDER DOCUMENT FOR

Gujarat Narmada Valley Fertilizers & Chemicals Ltd. PO: Narmadanagar, Bharuch (Gujarat) e-auction Notice

TENDER DOCUMENT. Tender for Supply, Installation & Commissioning of Laptop and All in one Color Printer cum Scanner cum Photo Copier - Hardware.

Tender Document No. ITMG/3/

TENDER DOCUMENT TENDER FOR SUPPLY & INSTALLATION OF WATER COOLERS AT OFFICES UNDER LIC DO, MEERUT

Perform Image Capturing of Answer Books Through Scanning/Other Photo Capturing Mechanism and Their Retrieval

INVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT

INVITATION FOR TENDER FOR SUPPLY OF EQUIPMENT

Gujarat Electricity Regulatory Commission

SKN AGRICULTURE UNIVERSITY, JOBNER

E-Tender BID FORM for Procurement of Appliances for Guest House/Hostel for IITRAM

Board of School Education Haryana, Bhiwani Empanelment of Vendors For Live CCTV Surveillance on turnkey basis for Evaluation Centres March 2018

Tender Document For Purchase of HDPE Bottles NAU/NMCA/PP/T-3/1/

Tender for the purchase of Biometric Equipments in CSE Department

SUB: RTM TENDER SCHEDULE AND OTHER TERMS & CONDITIONS FOR SUPPLY & INSTALLATION OF MICRO COMPUTER (DESKTOP TYPE), PRINTER & UPS.

INDIAN INSTITUTE OF SCIENCE BENGALURU

INVITATION TO BID (Request for Proposal)

STOCK HOLDING CORPORATION OF INDIA LIMITED

Òkjrh; lwpuk çks ksfxdh lalfkku xqokgkvh

Supply & Installation of 45 Computers [Business Class] with or without trading-in of the existing Computers. Bid Document- [DLC/2009/COM/01]

Board of School Education Haryana, Bhiwani Re-Tender Notice Empanelment of Vendors for Live CCTV surveillance system. For. HTET Exam Dec

Indian Institute of Management Indore (IIM Indore) is an Autonomous Institute under Ministry of Human Resource Development, Govt. of India.

UNIVERSITY OF MADRAS TENDER NOTICE

Bid Processing Fee: Rs. 1,770

Request For Proposal (RFP) for Supply, Installation and Maintenance of Twenty Desktop Computers for Disaster Recover Site, Lucknow

PRICE SCHEDULE Item Description Quantity ## (nos.)

1. Name of the Firm/Dealer/Vendor: Address with telephone No. :.

SAINIK SCHOOL KAZHAKOOTAM TRIVANDRUM

AN ISO 9001 & ISO COMPANY TENDER DOCUMENT. NIT No.: NRO/CON/738/667 date : FOR

Board of School Education Haryana, Bhiwani Empanelment of Vendors for Live CCTV surveillance system. For

Other terms & conditions of Tender for Supply of Software Licenses dated August 31, 2016 remains the same.

Transcription:

E-Auction For Procurement of Desktop & Laptop (Reference No. (n)code\2017-18\05) (n)code Solutions A Division of GNFC Limited 403, GNFC Infotower, S G Highway, Ahmedabad-380054, Gujarat Ph. No. 4000 7300 https://ncode.in Restricted Page 1 of 15

Contents DISCLAIMER... 3 1. SECTION : PRE-QUALIFICATION CRITER IA... 4 1.1. Pre-Qualification Criteria:... 5 1.2. Tender Details:... 6 1.3. e-auction Evaluation:... 6 1.3.1 Evaluation and Comparison:... 6 1.3.2 Award of Work/Criteria for Awarding Tender:... 8 2. SECTION : PAYMENT SC HEDULE AND SLA & PEN ALTIES... 9 2.1 Payment Schedule:... 9 2.2 Penalties... 9 2.3 Other Terms and Conditions:... 9 SECTION 3: SCOPE OF WORK & EXPECTED OUTC OMES... 11 3.1 Signing of Contract:... 12 3.2 Technical and Financial details... 12 3.2.1 Technical Bill of Materials:... 12 3.2.2 Financial Details:... 14 Annexure-III: GCC & GCP Attachments:... 14 Restricted Page 2 of 15

DISCLAIMER All information/ details contained in this e-auction Document are provided in good interest and faith. This is neither an Agreement nor an Offer or Invitation to enter into an Agreement of any kind with any Party. Though adequate care is taken in preparation of this document, the interested firm/ entity shall satisfy itself that the document is complete in all respects. The information provided in this document may not be complete and exhaustive, interested Bidders are required to make enquiries wherever required. Intimation of discrepancy/ ambiguity, if any, will be intimated immediately to (n)code. If no intimation is received by this office by the date mentioned in the document, it shall be deemed that the E-AUCTION document is complete in all respects and firms/ entities submitting their bids are satisfied that the E-AUCTION document is complete in all respects. (n)code reserves the right to reject any or all of the applications/ bids submitted in response to this E-AUCTION document, at any stage and without assigning any reasons, whatsoever. (n)code also reserves the right to withhold or withdraw the tender process at any stage, with intimation to all who submitted the E-AUCTION Application. (n)code reserves the right to change/ modify / amend any or all of the provisions of this E-AUCTION document. Such changes, if any, would be accordingly communicated to the Bidders. Information provided in this document or imparted to any firm/ entity as part of this Tender process is confidential to (n)code and the same shall not be used for any other purpose or distributed to or shared with any other person or organization. Restricted Page 3 of 15

1. SECTION : PRE-QUALIFICATION CRITERIA Restricted Page 4 of 15

1.1. Pre-Qualification Criteria: Pre-Qualification criteria defined for bidders desirous of bidding for the project : a) The bidder should be in the business of Supply, installation, commissioning and testing for Hardware and Software equipment s for at least three years from the e-auction date. b) The Bidder should have prior experience of supply of Scope mentioned activities. Purchase Orders Copies indicated supply of scope mentioned activities must be submitted for the same. The Bidder shall have experience in successful supply, installation of Desktop and Laptop Supporting Documents The Bidder : Business Registration Certificate or Company Incorporation Certificate, PAN Number, TAN, Service Tax registration, GST registration self-attested Copy Work Orders for supply and installation of Desktop & Laptop Bidder to submit minimum two such orders of value (with Completion Certificate from Customer) at-least Rs. 20 Lakhs each in last two years c) Total turnover of the bidder should must be average Rs. 50 Lakhs year for last two financial years (i.e., 2015-16 & 2016-17). d) The bidder should not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Gujarat or any of the PSU in the state of Gujarat. e) Affidavit mentioning that Bidder is not been blacklisted by any state Government, Central government, Tendering Authority, PSUs, Statutory, Autonomous, or Regulatory body within last three year. f) Bidder shall not have suffered bankruptcy/ insolvency during the last 5 years. The Bidder : Copies of the audited Balance sheet and profit and loss accounts The Bidder : Certificate of CA along with a self-affidavit on stamp paper of Rs. 100 Note: In addition to above mandatory documents, the bidder must submit Power of Attorney or board resolution duly executed in favor of the person signing the tender authorizing him to sign the tender document in case the bidder is not a sole proprietary concern. All criteria mentioned as above are mandatory to qualify in tender. Restricted Page 5 of 15

1.2. Tender Details: Earnest Money Deposit Mode of Bid Submission Bid Decrement Value Rs.10,000/- (Ten Thousands Only) Offline (Technical & Organizational ) /Online (Commercial) Rs.10,000/- (Ten Thousands Only) 1.3. e-auction Evaluation: 1.3.1 Evaluation and Comparison: a) For technical evaluation and comparison of the bids will be done based on the evaluation criteria given in the tender/bid document. b) Financial bids of only those bidders who qualify on the basis of evaluation of technical bids will be opened. Only without tax values will be considered for financial evaluation. c) The supplier / service agency will be selected based on evaluation of technical bids & financial bids. d) All Technical bids received from bidders are been opened in the presence of Tender Committee members. who choose to attend the bid opening on the specified date and time at below mentioned address: (n)code Solutions A division of GNFC Limited 403, GNFC Infotower, Bodakdev, S G Highway, Ahmedabad 380 054 e) The Bidder s names, bid modifications or withdrawals, bid prices and the presence or the absence of requisite bid security and such other details as (n)code, at his discretion, may consider appropriate, will be announced at the time of opening. f) No Bid shall be rejected at the opening, except for late bids, which shall be returned unopened to the bidders. g) Bids that are not opened and read out at bid opening shall not be considered for further evaluation, irrespective of the circumstances. Withdrawn bids will be returned to the Bidders. Restricted Page 6 of 15

h) (n)code reserves the right to accept or reject any/all bid without assigning any reason. i) Financial Bids of only those bidders who qualify on the basis of evaluation of technical bid & Demonstration will be opened in the presence of the qualified bidders or their representatives at pre-specified time and date which will be communicated to the qualified bidders well in advance. j) The tender committee has been empowered to take the final decision regarding the tender. k) The bidder shall be qualified on the basis of information furnished by the bidder in accordance with Clause-3.1.B above, in support of his capability with reference to qualification criteria laid down. Even though the bidder meets the above qualification criteria, he shall be disqualified if: The bidder had made misleading or false representation in the forms, statements and attachment submitted in proof of qualification requirements and/or. I. A record of poor performance such as abandoning the work, not properly completing the contract, inordinate delays in completion, litigation history or financial failures etc. II. Bidder has been blacklisted by any Government/ Non-Government / Private agencies/ Organizations/ Institutions/Government Undertakings and funding Agencies in the last 05 years. III. The bidder should provide accurate information on litigation and/ or arbitration resulting from contract completed or under execution by him over the last five years. A consistent history of arbitration awards/ judgments against the applicant or any partner of a joint venture may result in disqualification for proposed work. If the details of litigation history is hidden by the applicant and later on it comes to knowledge of the employer the bidder shall be disqualified for the proposed work and other appropriate actions shall be taken against the bidder. IV. The bidder should submit undertaking on non-judicial stamp paper of Rs. 100/- dully attested by notary public regarding document submitted, are true. Board would have the right to forfeit the EMD and black list to the bidder if any of the information given by the bidder is found faulty or incorrect or misleading. V. During the process of evaluation the (n)code may visit and inspect the works carried out by the bidder in order to assess the performance of the work. The bidder shall have to make arrangement for inspection of work at the respective worksite only. This shall also be considered for evaluation with reference to performance of the bidder. Restricted Page 7 of 15

VI. Depending upon the actual bid capacity assessed and other qualifying requirements, the applicant will be qualified for the work. However at the price bid evaluation stage, a careful check of the appropriate references with reference to the information submitted by the bidder will be done and in no case, a contract will be awarded to a bidder lacking in the financial criteria. 1.3.2 Award of Work/Criteria for Awarding Tender: a) After the closing time of submission, committee will verify the submission of EMD as per bid terms and conditions. The eligibility criteria evaluation will be carried out of the responsive bids. b) The technical bids of the bidders who are complying with all the eligibility criteria will be opened and evaluated next. c) The e-auction Committee reserves the right to award the contract in parts to more than one bidder, provided further that the Bidders(s) are determined to be qualified to perform the contract satisfactorily. Restricted Page 8 of 15

2. SECTION : PAYMENT SCHEDULE AND SLA & PENALTIES 2.1 Payment Schedule: Payment Term: a) No advance payment will be made on award of the contract. Payment Terms b) 70% payment Against Delivery c) 20 % on after complete installation and configuration of basic software d) 10% payment shall be released after completion of 6 months of service. Note: After getting P.O. Installation & Configuration has to be completed within 2 weeks by respective bidder. 2.2 Penalties Delay in delivery related penalty: The licenses are to be delivered and installed in 4 weeks from the date of issuance of Purchase / Work order. In case of delay in delivery of licenses and implementation, the penalty of 1% of contract value per delayed week will be levied up to maximum of 10% of contract value. If delay is beyond 10%, (n) Code reserves the right to terminate the contract. (n)code reserves the right to purchase such product/services from market at cost and risk of Vendor. 2.3 Other Terms and Conditions: a) (n)code reserves the right to split the scope of work and award separate contract/order to different Bidders. Also, Bidder has to confirm that they shall accept part order (including variation in the qty) without any commercial implications. Restricted Page 9 of 15

b) All the information contained in these requisition specifications is the property of GNFC and these are not to be reproduced or disclosed to other parties in any manner without prior permission in writing from (n)code. c) It is very critical that the knowledge of the (n)code facility is not misused / revealed by Bidder, Bidder s employees, and / or any entity associated with Bidder. This will be the Bidder s responsibility and violation to this shall have serious implications. d) Bidder to provide details of their experience and client list. e) Please refer attached GCC (General Conditions of Contract) & GCP (General Conditions of Purchase). All other terms & conditions not covered here are mentioned in these documents as well as in case of any dispute, GCC & GCP will prevail. Other Terms and Conditions Description Undertaking by bidder stating that they have read and understood the entire tender document and agree with all the terms and conditions stated in the e-auction. Compliance (Yes / No) Understanding by the bidder stating that there are no deviations with respect to the requirements detailed in this e-auction. Undertaking by the bidder stating that there are no deviations in the terms and conditions of the e-auction. Prices should be valid for 90 days. Bidder Organization has to agree to General Conditions of Contract (GCC) and General Conditions of Purchase (GCP) as per Annexure Restricted Page 10 of 15

SECTION 3: SCOPE OF WORK & EXPECTED OUTCOMES Restricted Page 11 of 15

3.1 Signing of Contract: a) (n)code Solutions notifies the successful Bidder that its bid has been accepted and sends a Contract Form. b) Within 15 days of receipt of the Contract Form, the successful bidder shall sign the contract and return it to (n)code. c) Prior to the expiry of the period of the bid validity, (n)code will notify the successful bidder in writing. The bidder will confirm the same in writing through registered letter. d) The notification of award will constitute the formation of the Contract. e) Upon the successful Bidder s furnishing of performance security, (n)code will promptly notify each unsuccessful bidder. 3.2 Technical and Financial details 3.2.1 Technical Bill of Materials: The details of Bill of Material are as per the following table. Bidder has to provide his response against each item. Technical Bill of Materials Acceptance Bidders to consider and provide makes/models considering detail specification mention in the E-AUCTION or Higher Specifications for Products of OEM featured in Leaders/ Challengers Quadrant in Latest Gartner Magic Quadrant and/or top 5 in IDC Latest report. Sr. No. Parameter Desktop - Minimum Specifications 1 Processor Intel Core i5-6500 3.2 GHz,6th Generation or better 2 Chipset Latest series 64bit Chipset 3 Motherboard OEM Motherboard 4 RAM 8 GB,Expandable upto 64GB - DDR4 5 Graphics card Minimum Graphics card with 2 GB video memory (non- shared) Compliance (Y/N) Restricted Page 12 of 15

1 TB SATA-3 Hard drive @7200 rpm with Flash Cache 6 HDD of 64GB SSD. Provision for installing 4 more drives. 7 Media Drive No CD / DVD Drive 8 Network interface 10/100/1000 Mbps autosensing on board integrated RJ-45 Ethernet port. 9 Audio Line/Mic IN, Line-out/Spr Out (3.5 mm) 10 Ports Minimum 6 USB ports (out of that 2 in front) 11 Keyboard 104 keys minimum OEM keyboard 12 Mouse 2 button optical scroll mouse (USB) 14 Monitor 15 Operating System 16 Warranty 3 Year 17 Security 22 TFT LED monitor, Minimum 1920 x1080 resolution, 5 ms or better response time, TCO 05 (or higher) certified. 64 bit pre-loaded OS Windows 10 Professional with recovery disc BIOS controlled electro-mechanical internal chassis lock for the system. SMPS; Minimum 400-watt Continuous Power Supply with Full ranging input and APFC. Power supply should be 90% efficient with EPEAT Gold 18 Power supply Certification for the system. Sr. No. Parameter Laptop - Minimum Specifications 1 Processor Intel Core i5-7200u upto 3.1 GHz,7th Generation 2 RAM 8 GB,Expandable upto 16Gb 3 RAM Type DDR4 4 Hard Disk 1 T.B 5 Networking Ethernet and Wifi 802.11 a/b/g/n 6 Optical Drive Integrated 7 Operating System Windows 10 Professional 8 Display 14 Inch or Higher 9 Display Resolution 1920 x 1080 Pixel 10 Graphics Integrated 11 USB 2.0 1 No 12 USB 3.0 2 No Compliance (Y/N) Restricted Page 13 of 15

13 Weight Less than 2.0 kg 14 VGA Port Available 15 HDMI Port Available 16 Finger Print Reader No 17 Power Adapter Yes 18 Warranty 3 Year 19 Laptop Bag Yes 3.2.2 Financial Details: As per the Bill of Material A Sr. No Item Description Quantity (B) Unit Price (C) Total Basic cost (Rs.) (D=B*C) Type of Tax Tax In (Rs.) (E) Total with Tax (Rs.) (F=D+E) 1 Desktop 10 2 Laptop 10 Grand Total Location (Installation to be performed): Ahmedabad & Gandhinagar (Gift City) All the AV Solution should be installed within 2 weeks after issue of Purchase Order or LOI from (n)code Solutions. Date: Organization s seal and Signature of authorized personnel Annexure-III: GCC & GCP Attachments: General Condition of Contract (GCC) General Condition of Purchase (GCP) General Condition of Purchase GCP (Mini) Restricted Page 14 of 15

Enclosed separately Restricted Page 15 of 15