P/N# Installation Manual - NOTE: THIS WASTEGATE KIT WILL NOT FIT AUTOMATIC VEHICLES WITH THE HY-35 TURBO.

Similar documents
P/N# This kit will not install on the L Powerstroke.

Caterpillar 3126 B & E models Edge EZ Module Installation Instructions & Manual OLD P/N: ECAT1000 NEW P/N: 50200

Diesel Rx Diaphragm Fuel Pressure Regulator

Cummins ISM Engine Module

20000 Module Installation Guide

Nissan 5.0L Cummins. Up to 60HP Gain. AgDieselSolutions.com

IV6001 Module Installation Guide

HP9015 Module Installation Guide

VP3044 Module Installation Guide

Dodge Cummins 5.9/6.7L

KUB1500 Module Installation Guide

JD2684F Module Installation Guide

IV6870B Module Installation Guide

Cummins 6.7L Tier IV CUCR3004 INSTALLATION INSTRUCTIONS

SISU1684 Module Installation Guide

RE1000 Module Installation Guide

GM 6.6L Duramax *L5P* Up to 90HP Gain 1-3 MPG Fuel Savings. AgDieselSolutions.com

Ford Power Stroke 7.3L Edge Products EZ Module Installation Instructions & Manual OLD P/N: EZF1000 NEW P/N: 10200

21078 Module. AgDieselSolutions.com. LG4 Inline 6 Duramax Up to 90HP Gain 1-3 MPG Fuel Savings

JD2904 Module Installation Guide

21000 Module Installation Guide

33000 Module Installation Guide

John Deere 13.5L Tier IV Module

GM/Dodge/Ram/Ford Drag Hot Form

Up to 90HP Gain. AgDieselSolutions.com

BD Cummins 12V Cool Covers

John Deere 9.0L Tier IV Module

SISU7066F Module Installation Guide

Case IH 10.3L and 12.9 Iveco Module

Part # DDECV TABLE OF CONTENTS. Contents... PG.2 Installa9on. PG.3-6 Troubleshoo9ng...PG.7 Updates PG.8. Introduc9on

EXTENDED WARRANTY COVERAGE

Installation Instructions: JK Inner Fender Liners Part Number(s): & Ratchet 3/8 & 7/16 Sockets. Plastic Clip Removal Tool

TERMS AND CONDITIONS OF SALE

EXTENDED WARRANTY COVERAGE

FYT T200W. Feature: Application: Commercial lighting for warehouse, bus station,airport, production line and so on.

ACTIVE EVACUATION SYSTEM (AES) OPERATIONS MANUAL

STEEL COMPANY R CALVING PEN CARE CENTER #15503 PARTS & ASSEMBLY MANUAL

Model QTS-5. QTS Industrial Series. Parts Manual

Audi B8 Alu Kreuz Drivetrain Stabilizer

Commercial Center Mount Volvo FH,FM,NH,VHD,VNL,VNM,VN,VT- Series Trucks xx. Installation Instructions

LIMITED WARRANTY. Limited Warranty Coverage for product using all AmesburyTruth products (including hardware and seal components)

Users Guide for Ac-MINI

whichever occurs first

MODELS 481, 483 AND 485 FIRE PUMPS INSTALLATION AND START-UP MANUAL

TERMS AND CONDITIONS OF SALE

The following STANDARD TERMS AND CONDITIONS shall apply to all sales of Products by Bailey.

Owner s Manual ! WARNING

American Bath Factory Warranty

TERMS AND CONDITIONS OF SALE- NU-LINE PRODUCTS

CENTRIFUGAL PUMP INSTRUCTION AND OPERATION MANUAL

Product Warranty. Class IV Structure

Product Warranty. Class IX Structure

Guardian Quik-Joint Pipe Coupling

THIS WARRANTY APPLIES ONLY TO 2015 AND LATER YEAR MODELS OF NEW K-TEC SCRAPERS ( K-TEC SCRAPER ).

TERMS AND CONDITIONS OF SALE

WARNING WARNING WARNING. Nissan Armada. Nissan Titan Crew Cab. Nissan Titan King Cab. Parts List 2 Tools Required 4 Installation Warranty

SUSTAINABLE MATERIALS, LLC TERMS & CONDITIONS OF SALE


Emser Tile - Warranty, Terms and Conditions

Terms & Conditions. Terms & Conditions / Warranty

Raydot Radiant Heater Hanging Bracket Assembly

Limited Warranty & Registration

JK Evap. Canister Relocation Kit

TERMS AND CONDITIONS OF SALE MEDICAL EQUIPMENT

STANDARD TERMS AND CONDITIONS

Repair Service Agreement

EXPRESS LIMITED WARRANTY

United Silicon Carbide, inc. Standard Terms and Conditions of Sale

COMMERCIAL SINKS AND FAUCETS LIMITED WARRANTY

License Plate Mount Camera

Emser Tile - Warranty, Terms and Conditions

Owner s Manual. Wood Hammock Stand w/ Cotton Hammock. item no. 014-HG / 014-HG FOLLOW US: CONTACT INFO: NOTE:

Sharpe Warranty Policy and Process

Owner s Manual. Swing Chair with Bed / 014-HG FOLLOW US: CONTACT INFO: NOTE: (949)

Candock limited warranty

CPCAM CCTV CANADA CORP. Terms & Conditions

Magnum Power Products Claim Policy Manual

Warranty Policy & Procedures

Operating Instructions and Parts Manual MBS-1014W Bandsaw

HI QUAL HEAVY DUTY HEAD GATE

Model QTS3QCB. Climate Control ol Series. Parts Manual Record of Change 3C. Manual No C3. February 2010 Edition

Should the Company in its absolute discretion elect to accept the return of any goods, the following will apply -

Special Seatbelt Airbag Offer for Comanche Aircraft

Owner s Manual. Double Chaise Rocker / Item# 014-HG

MANUFACTURER S LIMITED ENGINE AND POWERTRAIN WARRANTY: DTV SHREDDER VERSION ONE (196 CC)

Sunstream FloatLift Powerpack Shelf kit Assembly and Installation Instructions

TERMS AND CONDITIONS OF SALE

NORIBACHI COMMITMENT TO EXCELLENCE STANDARD FIVE YEAR LIMITED WARRANTY FOR HIGH LUMEN OUTPUT LED BULBS AND FIXTURES

795-kcmil, 3M TM Composite Conductor Compression Dead-end Connector Sustained Load Test in Accordance with ANSI C119.4

microvent mariner rescue resuscitator Price list parts January 2014

Snowboards ONE YEAR LIMITED WARRANTY 5150 ONE YEAR LIMITED WARRANTY

IMPORTANT VERIFICATION OF WARRANTY REGISTRATION

Motor Wedges. Instruction Manual

CINEMATRONIX PROVIDED EQUIPMENT WARRANTY

TERMS AND CONDITIONS OF SALE

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Shower Column SHCM Installation Guide

Services Agreement - Terms and Conditions. Gold Support Premier Enterprise Support Services

MAINE RESIDENTIAL LAMP RECYCLING PROGRAM RETAILER PARTICIPATION AGREEMENT

INSTALATION INSTRUCTIONS FOR SPY FANCAN

Transcription:

5 December 2007 1047151-1999-02 HX35 Dodge Cummins Adjustable Wastegate Kit 1 1999-2002 HX-35 Dodge Adjustable Waste Gate Kit P/N# 1047151 - Installation Manual - NOTE: THIS WASTEGATE KIT WILL NOT FIT 2001-02 AUTOMATIC VEHICLES WITH THE HY-35 TURBO. PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION. Please read the disclaimer before proceeding to install this unit.

5 December 2007 1047151-1999-02 HX35 Dodge Cummins Adjustable Wastegate Kit 2 0BIntroduction The purpose of this kit is to allow the user to adjust the amount of boost pressure generated by their turbocharger. The larger diaphram prevents waste gate creep and controls the waste gate much more efficiently. 1BAvailable Accessories BD Super B turbo, BD Twin Turbo, BD Super B Special turbo 2BKit Contents Part Number Description Qty. 3037-40 Rod End 1 1130141 5/16 Nut 1 1462445 Lock Nut 2 1453226 Actuator 1 1407153 Clamp 2 1407152 Circlip 1 1407155 Silicone Hose 7.5

5 December 2007 1047151-1999-02 HX35 Dodge Cummins Adjustable Wastegate Kit 3 3BInstallation 1. Remove the factory wastegate using an 11mm socket or wrench to remove the nuts holding the wastegate to the compressor housing. 2. Remove the cir-clip. Be sure to save this as it will be re-used later. 3. Slide the wastegate off of the actuation rod and discard it. Note that you may need to apply air pressure to the wastegate cylinder to remove the wastegate. 4. Install the BD High Performance Wastegate. Use the new mounting nuts and re-use the old circlip. Be sure to orientate the wastegate hose inlet correctly as well as install the wastegate adjustment locknut. A second circlip has also been provided in the kit. 5. Install the provided wastegate hose. Be sure not to kink it or using a radius that is too tight when connecting the hose. 6. To adjust the unit, loosen the lock nut and turn the rod end. Remember: the shorter the rod, the more boost pressure you will make. When looking at the rod end, turn the rod end clockwise for more boost pressure. The wastegate is preset to open at 30psi. Once you have set the boost pressure, re-install the circlip and tighten the lock nut. Remember: for more boost pressure, shorten the wastegate rod, and for less boost pressure, lengthen the wastegate rod. MORE BOOST TURN CLOCKWISE LESS BOOST TURN COUNTER CLOCKWISE

5 December 2007 1047151-1999-02 HX35 Dodge Cummins Adjustable Wastegate Kit 4 BD Engine Brake Disclaimer of Liability Other than as expressly set forth herein, BD ENGINE BRAKE, Inc. (hereafter collectively, "SELLER"), together with its distributors, jobbers and dealers shall in no way be responsible for the PRODUCT S proper use and service. In no event shall SELLER be liable for any special, incidental, indirect or consequential damages of any kind or nature, whether or not BUYER was advised of the possibility of damage, arising or resulting from the use or performance of the PRODUCT, and BUYER hereby waives any and all such claims. BUYER acknowledges that he/she/it is not relying on SELLER S skill or judgment to select or furnish goods suitable for any particular purpose and that SELLER has no liability that will extend beyond the scope of the limited warranty contained herein, and BUYER hereby waives all remedies or liabilities, expressed or implied, arising by operation of law or otherwise, (including, without limitation, any obligations of SELLER with respect to fitness for any particular purpose; merchantability; and special, incidental, indirect or consequential damages) or whether or not occasioned by SELLER'S negligence. SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages related to BUYER S use of the PRODUCT. BUYER acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and BUYER agrees to indemnify SELLER and hold SELLER harmless from any claim related to the PRODUCT and its use or performance. Under no circumstances will SELLER be liable for any damages, liabilities, costs or expenses incurred as a result of by reason of the use, performance or sale of the PRODUCT, including, without limitation, any damages, liabilities, costs or expenses incurred by reason of BUYER S negligence related to those uses of the PRODUCT. SELLER assumes no liability regarding the improper installation or misapplication of the PRODUCT. It is the installer's responsibility to check for proper installation, and, if in doubt, contact the manufacturer. ULIMITATION OF WARRANTY SELLER hereby provides the following limited warranty as to description, quality, merchantability, fitness for any product s purpose, productiveness, or any other matter of SELLER'S product sold herewith. The SELLER shall be in no way responsible for the product s open use and service and the BUYER hereby waives all rights other than those expressly written herein. This Warranty shall not be extended or varied except by a written instrument signed by SELLER and BUYER. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. All products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated proof of purchase receipt. All Warranty claims are subject to approval by BD ENGINE BRAKE, Inc. Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product, or any other contingent expenses. Under no circumstances will the SELLER be liable for any damage or expenses insured by reason of the use or sale of any such equipment. IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT: THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE, TO THE PLACE OF PURCHASE WITHIN THIRTY (30) DAYS FROM DATE OF PURCHASE FOR A FULL REFUND. THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE

5 December 2007 1047151-1999-02 HX35 Dodge Cummins Adjustable Wastegate Kit 5 BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS.