AP Macroeconomics - Mega Macro Review Sheet Answers

Similar documents
AP Macroeconomics Graphical Overview

Objectives of Macroeconomics ECO403

MACROECONOMICS. Section I Time 70 minutes 60 Questions

Archimedean Upper Conservatory Economics, November 2016 Quiz, Unit VI, Stabilization Policies

Answers and Explanations

Unit 3: Aggregate Demand and Supply and Fiscal Policy

Syllabus item: 113 Weight: 3

Dunbar s Big Review Sheet AP Macroeconomics Exam Content Area [Hubbard Textbook pages] (percentage coverage on AP Macroeconomics Exam) I.

AP Macro: Economic Models and Graphs Study Guide. Economic Conditions. Price Level. LRAS SRAS Price Level. Y F Y 1 Real GDP

INDIAN HILL EXEMPTED VILLAGE SCHOOL DISTRICT Social Studies Curriculum - May 2009 AP Economics

AP Macroeconomics review. By: Maria Villasmil. Economis: The study of how people, firms, and government make decisions when faced with scarcity.

2.2 Aggregate demand and aggregate supply

Archimedean Upper Conservatory Economics, October 2016

Garden City High School Course: AP Macroeconomics

Unit 3: Aggregate Demand and Supply and Fiscal Policy

Basic Concepts. MICROECONOMICS: deals with specific economic units and a detailed consideration of these individual units.

AP Econ Practice Test Unit 5

A. unchanged decrease B. surplus decrease C. unchanged no change D. surplus increase E. unchanged increase A. A B. B C. C D. D E. E.

7. Refer to the above graph. It depicts an economy in the: A. Immediate short run B. Short run C. Immediate long run D. Long run

Disposable income (in billions)

1. The most basic premise of the aggregate expenditures model is that:

Disputes In Macroeconomics

Unit 3 Exam Review. Formulas to Know: Output gap = YA YP/YP (x 100) MPC = Consumption/ Yd. MPS = Savings/ Yd

Macroeconomics Study Sheet

FINAL EXAM STUDY GUIDE

Fluctuations of Investment Durability Irregularity of Innovation Variability of Profits Variability of Expectations

FINAL EXAM STUDY GUIDE

Everyone Loves Econ Notes

Principles of Macroeconomics December 17th, 2005 name: Final Exam (100 points)

Assumptions of the Classical Model

ECO 2013: Macroeconomics Valencia Community College

AP Macroeconomics Syllabus Course Outline Required text: Economics: Principles, Problems, and Policies McConnel and Brue 15 th edition

INTI COLLEGE MALAYSIA UNIVERSITY FOUNDATION PROGRAMME ECO 183 : FOUNDATION ECONOMICS (MACROECONOMICS) RESIT EXAMINATION : AUGUST 2002 SESSION

ECON 1010 Principles of Macroeconomics Solutions to Exam #3. Section A: Multiple Choice Questions. (30 points; 2 pts each)

AP Macroeconomics Formulas and Definitions: Key Formulas

Consumption expenditure The five most important variables that determine the level of consumption are:

Disclaimer: This resource package is for studying purposes only EDUCATION

The Aggregate Expenditures Model. A continuing look at Macroeconomics

2000 AP Macro Exam [with some 1995 & 1990 questions]

Macroeconomics Unit 1: Basic Economics Concepts

Discussion Handout 7 7/12/2016 TA: Anton Babkin

Unemployment that occurs at the natural rate of output is called:

Government Budget and Fiscal Policy CHAPTER

ECON 201: Introduction to Macroeconomics Professor Robert Gordon Final Exam: March 18, 2016

Economics 1012A: Introduction to Macroeconomics FALL 2007 Dr. R. E. Mueller Third Midterm Examination November 15, 2007

Pre-Test Chapter 9 ed17

Webnote 228. Aggregate demand (AD) U-tube. Item hl sl Must Know Must know very well! Here are the details of what you need to know.

Introduction to Agricultural Economics Agricultural Economics 105 Spring 2015 Third Exam Version 1

Introduction. Learning Objectives. Chapter 11. Classical and Keynesian Macro Analyses

3. Explain what the APS tells us about people s spending and saving habits.

ADVANCED PLACEMENT MACROECONOMICS

The Influence of Monetary and Fiscal Policy on Aggregate Demand P R I N C I P L E S O F. N. Gregory Mankiw. Introduction

All the graphs (and some other stuff) you need to know for Macro

Unit 3.3 Macroeconomic Models Unit Overview

Practice Problems 30-32

1. When the Federal government uses taxation and spending actions to stimulate the economy it is conducting:

Aggregate Supply and Aggregate Demand

3) Gross domestic product measured in terms of the prices of a fixed, or base, year is:

How does the government stabilize the economy?

In this chapter, look for the answers to these questions

Helpful Hint Fiscal Policy and the AS-AD Model

LECTURE 18. AS/AD in demand-deficient Ireland: Unemployment and Deflation

3 Macroeconomics SAMPLE QUESTIONS

THE INFLUENCE OF MONETARY AND FISCAL POLICY ON AGGREGATE DEMAND

Economic Performance Indicators - Unemployment, CPI, GDP

4: AGGREGATE D/S & FISCAL POLICY

THE INFLUENCE OF MONETARY AND FISCAL POLICY ON AGGREGATE DEMAND

Sticky Wages and Prices: Aggregate Expenditure and the Multiplier. 5Topic

CH Lecture. McGraw-Hill/Irwin Colander, Economics 1-1

Macro Problem Set 3 Fall 2015

Aggregate to add up, aggregation usually implies that the things being added up are similar, but not exactly identical

CURRICULUM COURSE OUTLINE

A. Regular attendance is crucial to success in this class. Poor attendance will harm your participation grade. Grade categories are as follows:

UNIT 5: STABILIZATION POLICIES WHAT CAN THE GOVERNMENT AND THE FEDERAL RESERVE DO TO FIX RECESSIONARY AND INFLATIONARY GAPS?

ECON 3010 Intermediate Macroeconomics Final Exam

Advanced Placement Macroeconomics

Advanced Placement Macro Economics

2. Why is it important for the Fed to know the size and the rate of growth of the money supply?

Introduction to Agricultural Economics Agricultural Economics 105 Spring 2018 Third Hour Exam

Introduction to Economic Fluctuations

1. STUDENTS WILL BE ABLE TO DEFINE AND EXPLAIN THE CONCEPT OF FISCAL POLICY

ABOUT THE EXAM. Multiple Choice Questions two thirds of total score: Free Response Questions one third of total score:

1. You are right. When a fall in the value of the dollar against other currencies makes U.S. final

Homework 4 of ETP Economics

Macroeconomics Mankiw 6th Edition

Introduction. Learning Objectives. Learning Objectives. Chapter 12. Consumption, Real GDP, and the Multiplier

ECO 2013: Macroeconomics Valencia Community College

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Lecture 12: Economic Fluctuations. Rob Godby University of Wyoming

Name: Student # : Section: RYERSON UNIVERSITY Department of Economics

Chapter 13 Fiscal Policy

Introduction to Agricultural Economics Agricultural Economics 105 Spring Third Hour Exam Version 1

Econ 102 Exam 2 Name ID Section Number

download instant at

Econ 102/Lecture 100 Final Exam Form 1 April 27, 2005

EQ: What happens to equilibrium price and quantity when there is a change in supply or demand?

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

a) Calculate the value of government savings (Sg). Is the government running a budget deficit or a budget surplus? Show how you got your answer.

AGEC 105 Test 3 Spring 2013

The Influence of Monetary and Fiscal Policy on Aggregate Demand. Lecture

Transcription:

AP Macroeconomics - Mega Macro Review Sheet Answers 1. The business cycle. 2. Aggregate supply curve (with breakdown of sections). 3. Expansionary ( easy ) monetary policy (Buy bonds, discount rate, reserve requirement). AP Macroeconomics Review - with Answers Page 1

4. Contractionary ( tight ) monetary policy (Sell bonds, discount rate, reserve requirement). 5. Classical vs. Keynesian aggregate supply curves. 6. Short-run aggregate supply curve (SRAS). AP Macroeconomics Review - with Answers Page 2

7. Derivation of long-run aggregate supply (LRAS) from short-run aggregate supply (SRAS) curves. 8. Extended AS-AD model with a recession. 9. Extended AS-AD model with a short-run inflationary gap. AP Macroeconomics Review - with Answers Page 3

10. Extended AS-AD models with inflationary and recessionary gaps. 11. Monetary rule. 12. Economic growth & the extended AS-AD model. AP Macroeconomics Review - with Answers Page 4

13. Economic growth illustrated via a PPC diagram and LRAS. 14. Recessionary gap. 15. Inflationary gap. AP Macroeconomics Review - with Answers Page 5

16. Laffer Curve. 17. Derivation of LRPC (long-run Phillips curve) from short-run Phillips curves. 18. Short-run Phillips Curve. AP Macroeconomics Review - with Answers Page 6

19. Impact of tariffs & quotas. 20. Capital Inflow vs. Capital Outflow. 21. International Exchange Rates. AP Macroeconomics Review - with Answers Page 7

22. What is the difference between real and nominal? Real = Nominal Inflation. Real GDP adjusts Nominal GDP for changes in the price level (inflation and deflation). Real GDP = Nominal GDP / Price Index 23. What s not included in GDP? GDP represents the total market value of all final goods and services produced in a country in one year. Items excluded from GDP include: non-production transactions, existing goods or property sold/transferred, used items, secondhand sales, illegal activities, purely financial transactions, public transfers (social security, cash welfare benefits, etc.), private transfers (allowances, alimony payments, etc.), or the sale of stocks and bonds. 24. What are the determinants (shift factors) of aggregate demand? Changes in consumer spending, investment, government spending, and net exports will cause AD to shift. If consumer wealth increases, expectations become positive, household indebtedness decreases, or taxes decrease, AD will shift to the right (increase). If interest rates decrease or profit expectations increase, AD will shift to the right (increase). Profit expectations depend upon things such as expectations on future business expectations, technology, excess capacity, or business taxes. Net exports may change based on the amount of national income abroad or the value of the dollar. 25. What are the determinants (shift factors) of aggregate supply? Changes in input prices, productivity, or the legal (institutional) environment will result in a shift of the AS curve. Increases in domestic resource availability, decreases in the price of imports, or decreases in market power, will cause AS to shift to right (increase). Increases in subsidies, decreases in taxes, or reductions in government regulation will shift AS to the right. And, increases in productivity will lower per-unit production costs and increase AS. 26. What is cost-push inflation? Cost-push inflation exists when prices rise because of a rise in the per-unit production costs. 27. What is demand-pull inflation? Demand-pull inflation exists hen total spending exceeds the economy s ability to produce output at the current price level. AP Macroeconomics Review - with Answers Page 8

28. What is considered investment (I)? Purchases of machinery, equipment, and tools by businesses. Construction (including residential). Changes in business inventory. 29. What does full employment mean? Full employment means all available resources are being employed. 4-6% unemployment. 30. Who is excluded from the labor force? If you are not actively seeking work. Discouraged workers (those who want a job, but are NOT actively seeking one). Homemakers for non-market wages. Retired workers. Disabled workers. 31. What are the four types of unemployment? 1. FRICTIONAL: Between jobs (personal choice). They may have quit one job to find another, or they may be trying to find the best opportunity after graduating. 2. STRUCTURAL: Job mismatch Skills don t match the skills businesses want Basis for government job training programs. This happens as the demand for certain types of labor changes because skills are now obsolete. 3. CYCLICAL: Insufficient aggregate demand for people actively seeking jobs. 4. SEASONAL: Unemployment caused by changes in the weather. AP Macroeconomics Review - with Answers Page 9

32. How does one calculate the unemployment rate? The unemployment rate represents the % of the labor force not employed! Labor force = employed + unemployed. Unemployment rate = # unemployed / # labor force. 33. What is MPS? Marginal propensity to save is the % of any change in income that is saved. MPS = Savings / Income. 34. What is MPC? Marginal propensity to consume is the % of any change in income that is consumed. MPC = Consumption / Income. 35. What does MPS + MPC equal? MPS + MPC = 1. 36. What is APS? Average propensity to save is the % of income that is saved. APS = Savings / Income. 37. What is APC? Average propensity to consume is the % of income that is consumed. APS = Consumption / Income. 38. What does APS + APC equal? APS + APC = 1. 39. What is the formula for the spending multiplier? m = 1 / (1- MPC) m = 1 / MPS AP Macroeconomics Review - with Answers Page 10

40. Do changes in government spending and taxation have equal results? NO if changes are equal, government spending will have a larger impact since it has a direct effect. Taxes change income and, thus, consumption by an amount equal to the tax times the marginal propensity to consume. So, the change in consumption will be less than the tax change causing its overall impact to be less. 41. What is fiscal policy? Changes in government spending and taxation to manipulate spending! 42. What is expansionary fiscal policy? EXPANSIONARY FISCAL POLICY: To combat a recession! 1. Government Spending (Shifts AD to the right by more than a G due to the multiplier) 2. Taxes ( incomes and consumption by MPC x income, thereby shifting AD to the right by more than the C because of the multiplier) 3. Combination of Government Spending and Taxes. * If the budget was initially balanced, expansionary fiscal policy creates a BUDGET DEFICIT (G > T)! 43. What is contractionary fiscal policy? CONTRACTIONARY FISCAL POLICY: To combat inflation! 1. Government Spending (Shifts AD to the left by more than a G due to the multiplier) 2. Taxes ( incomes and consumption by MPC x income, thereby shifting AD to the left by more than the C because of the multiplier) 3. Combination of Government Spending and Taxes. * If the budget was initially balanced, contractionary fiscal policy creates a BUDGET SURPLUS (T > G)! 44. What type of fiscal policy results in crowding-out? Expansionary fiscal policy. AP Macroeconomics Review - with Answers Page 11

45. What type of fiscal policy results in crowding-in? Contractionary fiscal policy. 46. What is crowding-out? Crowding-out occurs when we are running on a budget deficit and, therefore, we must borrow money to finance that deficit. This increases the demand for loanable funds, causes interest rates to rise, and crowds out some private investment. 47. What is crowding-in? Crowding-in occurs when we are running on a budget surplus and, therefore, we don t need to borrow money to finance our budget. This decreases the demand for loanable funds, causes interest rates to fall, and crowds in some private investment. 48. What is an example of automatic stabilizers? Automatic stabilizers exist because net taxes change with GDP wince taxes reduce disposable incomes and therefore, spending. Taxes automatically rise with GDP when incomes rise. This is an example of an automatic contractionary fiscal policy. Taxes automatically fall with GDP when incomes fall. This is an example of an automatic expansionary fiscal policy. Transfers and subsidies rise when GDP falls; and when these government payments rise, net tax revenues fall along with GDP. This is also an example of an automatic expansionary fiscal policy. The size of automatic stability depends on the responsiveness of changes in taxes to changes in GDP. The more progressive the tax system, the greater the economy s built-in stability. Automatic stability reduces, but does NOT correct economic instability! 49. What is a budget deficit? Government expenditures > Government revenues. G > T. 50. What is a budget surplus? Government revenues > Government expenditures. T > G. AP Macroeconomics Review - with Answers Page 12

51. What is the difference between debt and deficit? Debt is the total accumulation of all past deficits and surpluses. 52. What is the Keynesian view on wage/price flexibility? Prices and wages are NOT flexible they are sticky. Since our economy is characterized by big businesses and unions, businesses are unlikely to lower wages. 53. What is the Classical view on wage/price flexibility? Prices and wages are flexible. During recessions, people lose jobs and are forced to take lower wages. This translates into lower business costs which allows for an increase in production. While nominal wages fall, real wages would remain the same because prices would also drop since firms would need to move out growing inventories. 54. Who is the founder of Classical economics? Adam Smith. 55. Who is the founder of Keynesian economics? John Maynard Keynes. 56. What is the shape of the Classical AS curve? The Classical AS curve is vertical since we always operate at full employment (due to flexible and responsive wages/prices). 57. What is the shape of the Keynesian AS curve? The Keynesian AS curve is horizontal since we usually are operating below full employment (and, since wages/prices are sticky ). AP Macroeconomics Review - with Answers Page 13

58. What is money? 1. Store of Value If it had no value, people wouldn t want it! This lets us transfer purchasing power from the present to the future. It s a convenient way to store wealth. 2. Unit of Account $ -- Price Tag -- Transactions. Prices are quoted in dollars and cents. 3. Medium of Exchange Accept currency in exchange for goods and services. 59. What is the Federal Reserve System? STRUCTURE OF THE CENTRAL BANK (The Federal Reserve System): The Fed was established in 1913. It holds power over the money and banking system. The central controlling authority is the Board of Governors. 1 Member (Presidents) from the 12 Federal Reserve District Banks represent the advisory committee which reports what is going on in each of the reserve bank s districts. The central bank is independent from the U.S. government! Politicians can t directly tell them what to do! 60. What are the tools of monetary policy? Open market operations (buy / sell government securities). Discount rate. Reserve requirement. 61. What is the formula for the money multiplier? mm = 1 / reserve ratio AP Macroeconomics Review - with Answers Page 14

62. What is the reserve ratio? The % of $ that banks must hold in reserves. This amount is set by the Fed and guarantees that banks won t loan out everything in deposit. Money Multiplier = 1 / Reserve Requirement = 1/ RR Example) If RR = 20%, the Money Multiplier = 1 / (1/5) = 5 Example) If RR = 10%, the Money Multiplier = 1 / (1/10) = 10 Changing the reserve ratio affects the size of excess reserves and, therefore the size of the multiplier as well! The reserve ratio is RARELY changed since changing it could destabilize bank s lending and profit positions! A change in the reserve ratio would affect banks lending ability immediately. 63. What is the discount rate? The interest rate the Central Bank charges other banks for loans. An increase in the discount rate signals that borrowing excess reserves is more difficult and will tend to shrink excess reserves. A decrease in the discount rate signals that borrowing excess reserves will be easier and will tend to expand excess reserves. Changing the discount rate has minimal direct effect, since only 2-3% of banks reserves are borrowed from the Fed. It serves more so as a signal indicating the direction of monetary policy! 64. What is the federal funds rate? The interest rate banks charge each other on overnight loans. The FFR is determined by the demand and supply of loanable funds (excess reserves). 65. What is stagflation? Stagflation occurs when prices and unemployment are both rising! AP Macroeconomics Review - with Answers Page 15

66. How do monetarists and Keynesians differ on the issue of crowding-out? Monetarists feel crowding-out is significant and that it completely negates the intended effects of fiscal policy. Keynesians recognize that crowding-out does exist, but they feel it is insignificant (because investments is not really sensitive to interest rates). 67. What is the monetary rule? A rule that would make the Fed increase the money supply each year at the same annual rate as the normal GDP growth rate. This rule would link increases in the LRAS with increases in the money supply so that AD is shifting rightward at the same time. 68. In macroeconomics, what is the difference between the short run and the long run? SHORT-RUN vs. LONG-RUN AGGREGATE SUPPLY: 1. SHORT-RUN: Nominal wages and other input prices remain constant (fixed) as the price level changes. Workers may not realize that their real wages have changed due to inflation (or deflation) and therefore have not adjusted their labor supply and wage decisions. Workers hired under fixed wage contracts are stuck with their current wages regardless of price level changes. 2. LONG-RUN: Nominal wages are fully responsive to changes in the price level. The LRAS (long-run aggregate supply) curve is a vertical line at the fullemployment level of real GDP. 69. What does a Phillips curve illustrate? Shows the inverse relationship between unemployment (u/e) and inflation! 70. Why is the LRAS curve vertical? The LRAS curve is vertical because it represents full employment (and, because nominal wages are fully responsive to changes in the price level in the long run). AP Macroeconomics Review - with Answers Page 16

71. How can we achieve economic growth? 6 MAIN FACTORS of GROWTH: 1. Quantity & Quality of Natural Resources. 2. Quantity & Quality of Human Resources. 3. Supply or Stock of Capital Goods. 4. Technology. 5. Aggregate Demand (must for output to ) 6. Full Employment & Full Production of Resources. This includes both allocative and productive efficiency. 72. How can we illustrate economic growth? GROWTH & PRODUCTION POSSIBLITIES ANAYLSIS: Growth is shown by an outward shift of the PPC. AD must to remain at the full employment at each new production level. New resources that cause the curve to shift outwards must be used efficiently in order to produce the maximum amount of output. In addition, for the economy to obtain the highest possible increase in monetary value, the goods and services most wanted by society must be produced (allocative efficiency). 73. What is the equation of exchange? MV = PQ. M is money supply, V is velocity, P is price, and Q is quantity. PQ represents nominal GDP. AP Macroeconomics Review - with Answers Page 17

74. What is the difference between tariffs and quotas? TARIFFS: Excise tax on imports. Often referred to as protective tariffs since they are intended to protect domestic producers from foreign competition by import prices. Sometimes tariffs are used as a method of bringing in more revenue. IMPORT QUOTAS: These quotas state the maximum amount of imported goods allowed during a specific time period. Low import quotas may serve as a better protective device since they restrict the amount of foreign goods coming into a country. 75. What is the difference between a trade deficit and a trade surplus? Trade Deficit: Imports > Exports. Trade Surplus: Exports > Imports. 76. What is the difference between capital inflows and capital outflows? CAPITAL INFLOW: (interest rate U.S. > interest rate rest of the world ) --> (8% > 5%) * The demand for dollars, value of the dollar, it now takes more foreign currency to buy $1 worth of goods! CAPITAL OUTFLOW: (interest rate U.S. < interest rate rest of the world ) --> (5% < 8%) * The demand for dollars, value of the dollar, it now takes less foreign currency to buy $1 worth of goods! 77. What is the difference between a strong dollar and a weak dollar? APPRECIATION (Strong Dollar): The value of a currency has (purchasing power ). It now takes less of that currency to buy another country s currency. DEPRECIATION (Weak Dollar): The value of a currency has (purchasing power ). It now takes more of that currency to buy another country s currency. AP Macroeconomics Review - with Answers Page 18

78. What is the purpose of trade? ECONOMIC BASIS FOR TRADE: 1. International trade allows nations to the productivity of their resources and therefore realize an expanded PPC (shifts out). 2. The distribution of resources among countries are often unequal. 3. Efficient production entails different technologies and combinations of resources. 4. Products vary amongst nations and some people like imports over domestic goods. 5. As economies progress, the level of resources available may change and affect the relative efficiency of the production of goods and services. 79. What is the difference between absolute and comparative advantage? ABSOLUTE ADVANTAGE: One should buy goods from another if they can produce it cheaper than you can. COMPARATIVE ADVANTAGE: It s beneficial for a person (or country) to specialize and trade even if that person is more productive than the possible trading partners in everything. If there are relative cost differences in the production process, people should specialize. 80. What does the following equation stand for: B.O.P. = B.O.T + C.F. Balance of Payments = Balance of Trade + Capital Flows. Balance of Trade = Exports Imports. Capital Inflow: Interest rates (u.s.) > Interest rates (r.o.w.) Capital Outflow: Interest rates (u.s.) < Interest rates (r.o.w.) 81. What is currency? Coins and paper (Federal Reserve Notes) held in the hands of the public. It is token money since its intrinsic value is less than its actual value. AP Macroeconomics Review - with Answers Page 19

82. What is M1? M1 = Currency + Demand Deposits (Checking Accounts). 83. What is the largest component of M1? Demand Deposits (Checking Accounts). 84. Who is helped and hurt by inflation? REDISTRIBUTIVE EFFECTS of INFLATION: 1. Fixed Income Groups (Hurt). 2. Savers (Hurt). 3. Debtors / Borrowers (Helped). 4. Anticipated Inflation (Effects are less severe due to inflation premiums built into wage/pension contracts). *** Most people are simultaneously helped and hurt by inflation since we are often both borrowers and savers! *** Mild inflation may be a healthy by-product of a prosperous economy or it may have undesirable effects! 85. What types of policies are used during periods of high unemployment? Expansionary ( easy ) fiscal and monetary policies. Fiscal Policies: Taxes, Government Spending. Monetary Policies: reserve requirement, discount rate, BUY bonds. 86. What types of policies are used during periods of high inflation? Contractionary ( tight ) fiscal and monetary policies. Fiscal Policies: Taxes, Government Spending. Monetary Policies: reserve requirement, discount rate, SELL bonds. AP Macroeconomics Review - with Answers Page 20

87. Circular Flow Revisited AP Macroeconomics Review - with Answers Page 21