WORKSHELF TABLES Specifications & Pricing Workshelf tables feature the same solid wood leg and steel understructure design from the Workshelf product series. The tables come in a variety of organic worksurface shapes featuring curved corners. Solid wood legs are offered in 3 solid colors and 14 wood stains. The full metal frame comes in white or graphite powdercoat. Power access is available in the metal frame and power/data options include surface embedded or under-surface options. Wire cable management runs through channels that are located down the back-side of the legs. Meeting, counter and bar height tables can nested together. Visit www.three-h.com for downloadable marketing material & images
INDEX TABLES 3... Index 4... General Furniture Specifications 5... 3H Limited Lifetime Warranty 6... 3H Terms & Conditions 7... Finishes 8-10... Statement of Line 11... Leg Stain Finishes 12-20... Price Guide 15... Square Table 16... Round Table 17... Rectangle Table 18... Arc Square Table 19... Arc Double Table 20... Arc Wing Table P. 3
TABLES GENERAL FURNITURE SPECIFICATIONS General Furniture Specifications Workshelf tables are constructed of thermofused melamine laminated on an industry standard particleboard core. All laminate material is finished with a decorative face on both sides and is available in over 36 woodgrain, solid and composite colors. Worksurface tops are 1 thick, and are available with a 1mm PVC trim and knife edge trim, finished to match or compliment the selected laminate finish. All table shapes include an extruded aluminum support frame connected with powder coated steel corner brackets to create a strong ridged leg connection. Aluminum Components Worksurface underframe is available White or Grey powder coated steel. Wood Components Legs are solid European beech hardwood, available in 14 stained finishes or 3 paint colors. Standard Grain Direction Worksurfaces: Grain runs parallel to the desk length Leg: Vertical grain Glide / Leveler Adjustment Table Legs: 1.25 adjustment SCS Indoor Air Quality Certified Workshelf components meet LEED requirements for Low Emitting Materials Systems Furniture and Seating. P. 4
3H LIMITED LIFETIME WARRANTY TABLES Three H Furniture Systems Limited ( Three H ) provides a limited lifetime warranty on all products sold to the original purchaser by a Three H authorized dealer. Three H warrants that its product will remain functional1 for as long as the original purchaser owns the product. The obligation of Three H under this warranty is to repair or replace with a comparable product or component determined to be defective by Three H at no cost to the original purchaser, FOB purchaser s destination. 1 Remain Functional refers to the products ability to fulfill its original purpose or function. Updated January 2017 EXCEPTIONS TO THIS WARRANTY MAY INCLUDE: Three H provides a full warranty on our bullnose, wavecrest and prestige wood trim and finish for a period of 3 years after date of delivery. After 3 years, the warranty applies to the wood edge only. General wear and fading of the finish after a 3 year period is not considered a defect. Three H provides a full warranty on our Workshelf wood legs and finish for a period of 3 years after date of delivery. After 3 years, the warranty applies to the leg only. General wear and fading of the finish after a 3 year period is not considered a defect. Variation in laminate finish characteristic including color and texture is not considered a defect. All fabrics including tackboards, panels & cushions are warranted for a period of 5 years after date of delivery. All lighting products including bulbs, tubes, ballasts and LEDs do not carry a warranty. All power related products & components carry a 1 year warranty. All electric height adjustable components carry a 3 year warranty. Product & components which are not directly manufactured by Three H. In this case warranty is determined by what is offered from the manufacturer of the defective product or component. Product that is not sold by a Three H authorized dealer. Product that is not installed & maintained in accordance with Three H s guidelines & instructions. Product that is damaged by the end user due to misuse, accident, abuse, negligence or shipping. Incidental wear to product including scratches & dents occurring from everyday use. Product that has been altered or re-configured in any way prior to written approval by Three H. Product which has received excessive exposure to U.V rays, heat, water or harsh chemicals. Product that has been damaged due to re-installation without the assistance of an authorized Three H dealer or installer. Product that has been subject to conditions that exceed the BIFMA/ANSI standards applicable to that product. Product that is being used for rental purposes. Customers own material (COM) provided at the request of the user is not covered by the Three H warranty. WARRANTY CLAIM PROCEDURE All warranty claims must be authorized by Three H prior to approval. Claims can be directed to Three H s warranty & replacement officer by contacting 1.800.767.5374 or by emailing claims@three-h.com. Claims must include original order number, as well as a description of return request. Three H reserves the right to investigate any of the above mentioned exceptions, request digital photos of the product in question, as well as proof of original ownership prior to warranty approval. THIS WARRANTY LIABILITY IS LIMITED TO THE REPLACEMENT OF PRODUCT. THREE H WILL NOT BE HELD LIABLE FOR ANY PERSONAL OR PROPERTY DAMAGE AS WELL AS ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE. THIS WARRANTY EFFECTIVE JANUARY 2017 SUPERSEDES ALL PREVIOUS WARRANTIES OFFERED BY THREE H FURNITURE SYSTEMS LIMITED. CARE & MAINTENANCE Three H laminates can be easily cleaned with warm water and mild soaps. Do not use cleansers which contain abrasives, acids or alkalis. P. 5
TABLES 3H TERMS AND CONDITIONS OF SALES QUOTATIONS Three H can only provide quotations to registered dealers. Standard quotations are valid for a period of thirty (30) days unless otherwise specified. Registered project quotations are valid for a period of sixty (60) days unless otherwise specified. PRICING All pricing is subject to change without notice. Prices are subject to any provincial or state taxes & are confirmed at time of invoice. ORDER SUBMISSION An official purchase order is required for all purchases. PO s may be submitted by email to orders@three-h.com or by fax at 1-888-484-5786. The following information is required on all purchase orders: Company name, purchase order number, delivery address & contract number, Three H quotation number(s) or project registration number (if applicable), décor selections (tops, fronts, décor, trim, fabric), total net pricing including dealer discounts and any applicable freight & tax amounts. CONFIRMATIONS After receiving a purchase order, Three H will provide a confirmation along with estimated ship dates. If any discrepancies exist, Three H will provide a deficiency report outlining the details. If you do not receive a confirmation within 48 hours of submission, please contact customer service for verification. DEPOSIT REQUIREMENTS Deposits may be required on large volume orders & can be requested by Three H at quotation stage or at time of purchase order. ORDER CHANGES AND CANCELLATIONS Canceled orders may be subject to re-stocking fees. Restocking fees are a percentage net (including full amount) depending on their status in production. All Three H is product is made to order and does not come from a stocking program. Product returns must be authorized by Three H prior to being sent back. A return authorization number will be issued by our warranty/claims department upon approval. All product being returned must be packaged securely in a similar manner as it was delivered. Product returned damaged will be refused. REPLACEMENTS Replacement components can be requested from replacements@three-h.com or by calling 1.800.767.5374 ext. 235. Please have original Three H order number available when requesting replacements parts. Any installation and labor charges related to warranty replacements must be reviewed & approved by Three H prior to being reimbursed. Three H does not reimburse for concealed freight damages or damages that occur during installation. WARRANTY Three H Furniture Systems offers a limited lifetime warranty on all products. For detailed information, please review our full warranty policy. FREIGHT INFORMATION MINIMUM FREIGHT CHARGES Unless otherwise specified, freight is included to dealer dock on all orders when combined shipment values exceed $5000 list. In certain locations, zone freight premiums may apply. Combined orders under the minimum list will have a $150 net freight charge applied. Three H is not responsible for consolidating or holding orders in order to meet the minimum requirements. This is the responsibility of the dealer. ALTERNATE SHIP TO LOCATIONS If alternate ship to locations other than dealer dock is required, additional freight charges may apply. Please contract Three H Customer Service to verify prior to submitting PO. ADDITIONAL CHARGES Additional shipping charges may also apply for direct to site delivery, weekend delivery, storage fees, gate services, call ahead notices, excessive unload times or other custom freight requests. Please contact customer service for any freight related questions. DAMAGED PRODUCT All merchandise is inspected and packed prior to shipment. It is the responsibility for the dealer to inspect packaging thoroughly upon delivery for any damages prior to accepting delivery. Obvious damages or shortages should be noted on the freight bill (bill of lading) and a claim filed immediately with Three H. Concealed damage should be reported to Three H immediately upon discovery. Any claims against Three H for apparent defects, errors or shortages must be made by the purchaser, in writing, within ten (10) working days after delivery. Failure to make a claim within ten (10) days shall constitute acceptance of the goods and a waiver of any apparent defects, errors or shortages. P. 6
LAMINATES FABRICS PULLS EDGES Visit www.three h.com/tables for more details on this product line and to view our broad selection of finishes. Finishes not listed can be made available upon request. All Specifications are subject to change without notice.
STATEMENT OF LINE
STATEMENT OF LINE TABLES SHAPES COFFEE TABLE 18 H MEETING TABLE 30 H COUNTER TABLE 37 H BAR TABLE 44 H Arc Wing (AW) Arc Double (AD) Arc Square (AR) Rectangle (RE) Round (RO) Square (RE) 24x24 30x30 36x36 42x42 30x30 36x36 42x42 48x48 30x30 36x36 42x42 48x48 30x30 36x36 42x42 48x48 36x36 42x42 36x36 42x42 48x48 36x36 42x42 48x48 36x36 42x42 48x48 36x24 48x24 60x24 60x30 72x30 60x24 72x24 60x30 72x30 72x36 60x24 72x24 60x30 72x30 72x36 60x24 72x24 60x30 72x30 72x36 30x30 36x36 42x42 30x30 36x36 42x42 48x48 30x30 36x36 42x42 48x48 30x30 36x36 42x42 48x48 60x24 60x30 72x30 60x24 72x24 60x30 72x30 72x36 60x24 72x24 60x30 72x30 72x36 60x24 72x24 60x30 72x30 72x36 54x37 72x42 78x42 84x42 P. 9
TABLES STATEMENT OF LINE Frame Color White Graphite Edge Style Leg Color White Graphite Orange Stain (15 Options) Next page to view Stain Options 1mm PVC Knife Edge P. 10
TABLE LEG STAINS TABLES Autumn Cherry Dark Suede Honey Maple Mahogany Mocha Rift Mocha Walnut Nightfall Cocoa Oiled Cherry Stream Walnut Sunset Symphony Walnut Tuxedo Victoria Walnut Victorian Cherry Wild Cherry P. 11
2 PRICE GUIDE
TABLE CODE BREAKDOWN TABLES 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WS TL 72 36 18 - N - AD W W - KA 0 0 G G PRODUCT INFORMATION & DIMENSIONS 1 2 3 4 5 WS TL 72 36 18 PRODUCT LINE Workshelf PRODUCT CATEGORY Table LENGTH 24" 30" 36" 42" 48" 54" 60" 72" DEPTH 24 30 36 37 42 18" 30 37 44 6 DIRECTION N DIRECTION N=Neutral DIRECTION VARIATIONS L=Left R=Right (Applicable with the Arc Wing top shape only) TOP STYLE, LEG STYLE 7 8 9 AD W W TOP STYLE AD=Arc Double AR=Arc Square AW=Arc Wing RE=Rectangular RO=Round LEFT LEGS Wood RIGHT LEGS Wood EDGE, BEAM COLOUR, LEG COLOUR 10 KA EDGE STYLE KA=Knife Edge EDGE VARIATIONS SE=1mm PVC 11 0 GROMMET STYLE 0=None 12 0 GROMMET POSITION 0=None 12 G BEAM COLOUR G=Graphite COLOUR VARIATIONS W=White 14 G LEG COLOUR G=Graphite COLOUR VARIATIONS W=White O=Orange S=Stain (15 stain options) P. 13
TABLES GUIDE TO TABLE PRICING PAGES 1 Choose an Table Shape & Edge Style Each page has a dedicated table Shape, once you choose a shape you can choose an Edge Style. There are 2 tables per page, 1 table is for 1mm PVC and the other for Knife Edge. *Square (RE) WORKSURFACE SHAPES Round (RO) Arc Square (AR) *Rectangle (RE) Arc Double (AD) 24" x 24" x x x 30" x 30" 36" x 36" 42" x 42" 48" x 48" x *Square tops are within the Rectangle code family (RE) 24" x 24" x x x 30" x 30" 36" x 36" Arc Wing (AW) 42" x 42" 48" x 48" x LEFT RIGHT 2 Choose Dimensions Down the left side of the table are the Lengths and Depths. The top row has all four heights represented. The x s mean sizes are not available. S 18 H 30 H 24" x 24" x x x Coffee Table Meeting Table 30" x 30" 36" x 36" 42" x 42" 48" x 48" x 37 H 44 H 24" x 24" x x x 30" x 30" 36" x 36" 42" x 42" 48" x 48" x Counter Table Bar Height Table P. 14
SQUARE TABLE TABLES WS TL XX XX XX - N - RE W W - XX 0 0 G G LENGTH (L) DEPTH (D) (H) TOP STYLE EDGE SQUARE (RE) 1mm PVC (SE) LENGTH x DEPTH 24" x 24" $1081 x x x 30" x 30" 1163 1259 1304 1647 36" x 36" 1250 1346 1391 1734 42" x 42" 1356 1297 1497 1840 48" x 48" x 1552 1597 1888 SQUARE (RE) Knife Edge (KA) LENGTH x DEPTH 24" x 24" $1393 x x x 30" x 30" 1526 1622 1667 2010 36" x 36" 1664 1760 1805 2148 42" x 42" 1822 1685 1963 2306 48" x 48" x 2069 2114 2457 P. 15
TABLES ROUND TABLE WS TL XX XX XX - N - RO W W - XX 0 0 G G LENGTH (L) DEPTH (D) (H) TOP STYLE EDGE ROUND (RO) 1mm PVC (SE) DIAMETER 36" $1160 1256 1301 1644 42" 1266 1314 1407 1750 48" x 1462 1507 1849 ROUND (RO) Knife Edge (KA) DIAMETER 36" $1574 1671 1715 2058 42" 1732 1754 1873 2216 48" x 1826 2024 2367 P. 16
RECTANGLE TABLE TABLES WS TL XX XX XX - N - RE W W - XX 0 0 G G LENGTH (L) DEPTH (D) (H) TOP STYLE EDGE RECTANGLE (RE) 1mm PVC (SE) LENGTH x DEPTH 36" x 24" $1161 x x x 48" x 24" 1239 x x x 60" x 24" 1319 1416 1461 1803 60" x 30" 1389 1485 1530 1873 72" x 30" 1399 1571 1616 1959 72 x 36 x 1633 1678 2021 RECTANGLE (RE) Knife Edge (KA) LENGTH x DEPTH 36" x 24" $1524 x x x 48" x 24" 1653 x x x 60" x 24" 1785 1882 1927 2269 60" x 30" 1880 1977 2022 2365 72" x 30" 2018 2114 2159 2502 72 x 36 x 2202 2247 2590 P. 17
TABLES ARC SQUARE TABLE WS TL XX XX XX - N - AR W W - XX 0 0 G G LENGTH (L) DEPTH (D) (H) TOP STYLE EDGE ARC SQUARE (AR) 1mm PVC (SE) LENGTH x DEPTH 30" x 30" $1163 1259 1304 1647 36" x 36" 1250 1346 1391 1734 42" x 42" 1356 1452 1497 1840 48" x 48" x 1552 1597 1939 ARC SQUARE (AR) Knife Edge (KA) LENGTH x DEPTH 30" x 30" $1526 1622 1667 2010 36" x 36" 1664 1760 1805 2148 42" x 42" 1822 1918 1963 2306 48" x 48" x 2069 2114 2457 P. 18
ARC DOUBLE TABLE TABLES WS TL XX XX XX - N - AD W W - XX 0 0 G G LENGTH (L) DEPTH (D) (H) TOP STYLE EDGE ARC DOUBLE (AD) 1mm PVC (SE) LENGTH x DEPTH 60 x 24 $1319 1416 1461 1803 60 x 30 1389 1485 1530 1873 72" x 24" x 1496 1541 1884 72" x 30" 1474 1571 1616 1959 72" x 36" x 1633 1678 2021 ARC DOUBLE (AD) Knife Edge (KA) LENGTH x DEPTH 60 x 24 $1785 1882 1927 2269 60 x 30 1880 1977 2022 2365 72" x 24" x 2013 2058 2401 72" x 30" 2018 2114 2159 2502 72" x 36" x 2202 2247 2590 P. 19
TABLES ARC WING TABLE WS TL XX XX XX - R - AW W W - XX 0 0 G G LENGTH (L) DEPTH (D) (H) DIREC- TION TOP STYLE EDGE ARC WING (AW) 1mm PVC (SE) LENGTH x DEPTH 54" x 37" $1453 x x x 72" x 42" x 1695 x x 78" x 42" x 1743 x x 84" x 42" x 1792 x x ARC WING (AW) Knife Edge (KA) LENGTH x DEPTH 54" x 37" $1946 x x x 72" x 42" x 2290 x x 78" x 42" x 2364 x x 84" x 42" x 2437 x x P. 20
Three H Furniture Systems Limited 156462 Clover Valley Rd. New Liskeard, ON Canada P0J 1P0 T. 1.800.767.5374 F. 1.888.484.5786 customer.service@three-h.com www.three-h.com 2017 Three H Furniture Systems Limited. All rights reserved.