K2 SNOWBOARDING BINDING TECH MANUAL 17-18
ITEM CODE The Item Code is located on the inside of the LEFT heelcup as shown below. This number identifies the year, model, color and size of the binding. B1404009014 Size codes 1 - XS 2 - S 4 - M 6 - L 8 - XL Color code is not consistant across models. Each model has their own colors specific to each year. pg 1
Mini-Disk 22 Universal Disk 21 Disc mount screw 24 and washer set Leash Highback Calfpad Offset Mini-Disk 23 Ladder strap, ankle Ankle strap 1 2 3 Ankle mount strap Ankle Buckle 8 Ankle Buckle funnel Buckle mount screw 10 Toe Strap Assembly Toe Buckle 14 Toe Buckle funnel Buckle mount screw 10 Lean block and lever 15 Baseplate/Chassis 17 18 Highback mount t-nut 5 6 3 7 Ankle strap mount screw Strap mount rubber washer Ankle mount t-nut (inside) Black- Reference pg 2 Toe mount strap 13 Toe ladder strap 12 Highback mounting lever 16 Green - Warranty stock
Toe ramp (a line) Toe ramp mount pin 19 EVA footbed (full) Toe ramp (pro fusion) Toe ramp adjustment lever Disc-cover clip 20 7 4 6 17 18 16 Mount hardware for Ankle mount strap - Standard and Ankle ladder strap Ankle strap t-nut Strap mount rubber washer Ankle strap mount screw Highback mount t-nut (airlock shown) Highback mount lever assembly does not include t-nut Mount hardware for Ankle mount strap - Hinge Ankle strap t-nut 7 Ankle strap mount screw - Hinge/Cinch 5 Ankle mount strap assembly - Hinge - mount hardware seperate Ankle mount strap - Standard -mount hardware seperate Ankle ladder strap -mount hardware seperate Toe mount strap -includes pin Toe ladder strap -includes pin 2 3 1 13 12 Toe strap assembly 11 -includes Toe mount strap and pin. Highback lean block 15 assembly includes lever/screw, lean block and spring(no t-nut). pg 3
37 K2 SNOWBOARD BINDING TECH MANUAL 17-18 Toe buckle - Cinch (drag housing) 11 Toe strap 36 Toe mount strap - Cinch 34 Ankle buckle - Cinch (drag housing) Cinch bindings Ankle strap 30 Ankle ladder strap - Cinch 31 Ankle mount strap - Cinch 33 Cable anchor - Ankle strap t-nut Highback Calfpad 5 Sideplate Ankle strap mount screw - Hinge/ Cinch 32 Ankle mount bushing (both straps) 41 Highback mount screw - Cinch 42 Highback mount t-nut - Cinch 38 19 39 Toe ramp mount pin (not shown) Toe ladder strap - Cinch 35 Baseplate pg 4 Heelcup 40 Cinch cable assembly Leanblock assembly - Cinch Leanblock mount screw - Cinch Grab loop - included with Leanblock assembly
Grom bindings Toe strap mount pin Ankle mount strap - Grom 13 Ankle Strap - Grom Highback - Grom 25 Disc mount screw and washer set Ankle strap mount screw - Grom Ankle strap pivot - Grom (inside) Toe mount strap- Grom Baseplate - Grom Ankle buckle - Grom Ankle ladder strap - Grom 12 pg 5 9
WARRANTY POLICY CUSTOMER SERVICE USA: 1-800-972-4063 CANADA: 1-877-393-7049 EU: 49.8856.9010 JAPAN: 81.3.3320.7822 ONE YEAR LIMITED WARRANTY K2 warrants to the original purchaser the Binding shall be free from defects in materials and workmanship for a period of one (1) year from the original date of purchase. Should a defect occur during the one year warranty period, K2 will repair or replace the defective product or component part at its option, free of charge, and only for problems associated with normal use of the binding. This warranty shall not apply if the Binding is: A: Altered, modified, or tampered with in any way by anyone. B: Damaged by negligence, accident, or unreasonable use or by other causes unrelated to defective materials or workmanship. C: Has had the serial number altered, defaced or removed. K2 ONE YEAR OUT-OF-WARRANTY OFFER (Dealer option) K2 warrants this product to be free from defects in materials and workmanship for a period of (1) year from the original date of purchase at retail. If our product is determined to have failed due to any other reason within a period of one year from the original date of purchase at retail, we offer a service replacement program to the dealer to replace the original product with identical or reasonably equivalent product at Warranty cost, (Whsl. -25%). The Dealer may opt to pass this savings on to the customer. All shipping costs will be the responsibility of the dealer. This program is an immediate one time offer per customer and must be exercised by the customer within 30 days of the original offer date. Out of warranty offers cannot be made with dealer inventory. This program must be run directly through the Dealer and will follow the same Terms, Responsibilities and Limitations as the One Year Limited Warranty. Limitations: (1) This warranty shall not apply if the Binding is: A: Altered, modified, or tampered with in any way by anyone. B: Damaged by negligence, accident, unreasonable use or by other causes C: Has had the serial number altered, defaced or removed. (2) K2 limits all implied warranties (including, but not limited to fitness and merchantability) to one (1) year from the original date of purchase at retail. In the event that the purchaser is unable to provide proof of purchase, the warranty period shall be one year from the date of manufacture. (3) This warranty extends only to the original retail purchaser, and is not transferable. (4) K2 s sole liability from this warranty is limited to repair and replacement of defective product. Under no circumstances shall K2 be held liable for death or injuries to persons, damage to property, or for incidental, contingent or consequential damages or expenses arising from the use of K2 products. (5) Replacement products under this warranty are warrantied only for the remainder of the original warranty period. pg 6
WARRANTY POLICY TERMS Purchaser's Responsibilities: (1) The Purchaser must retain a copy of the original Proof of Purchase from the Dealer. (If the original proof of purchase cannot be provided on a warranty return, K2 will use the manufacturing date as the start of the warranty period). (2) Damaged product submitted for warranty service must be taken, along with Proof of Purchase, to the K2 Dealer you purchased the product from before expiration of the one year warranty period. K2 s Responsibilities: (1) Products returned for warranty service shall be inspected by a K2 Warranty Service Technician. (2) If the problem is judged by K2 to be due to a factory defect, we will repair, or replace (with an identical or reasonably equivalent product) the product at our election, or we may elect to refund the purchase price (less reasonable depreciation based on actual use) if we cannot readily and quickly provide a replacement. (3) K2 will return the repaired or replacement product at our expense, but if we determine that there is no defect or that the defect resulted from causes not within the scope of this warranty, storage and or return of the product will be at the customers expense. (4) The K2 Warranty Manager makes the final determination concerning defects in materials and workmanship. Dealer's Responsibilities: (1) Request a copy of the original Proof of Purchase and determine if the product is still under warranty. (2) Inspect the product to try and make a determination of the defect. (3) Contact a K2 Customer Service Representative and be prepared to give the following information: a) Account number f) Product model and size b) City g) Original Purchase Date c) New or used product h) Serial number d) Consumers name (Last, First) i) Point of contact phone number e) Dealer reference number j) Defect description (4) The K2 Customer Representative will provide an appropriate address to send the product. (5) Send the product, packaged securely with the following information: a) RMA number received from K2 Customer Service Rep. written on outside of package. b) RMA number and Copy of Original Proof of Purchase must be included inside of package! (Please enclose in an envelope) The purchaser and or Dealer are responsible for removing the binding from the board, shipping and handling charges to the K2 service center along with non-warrantable product back from the K2 Service center. pg 7