studycafe.in PTUM (i) Re-order quantity (ii) Re-order level (v) Average stock level

Similar documents
PTP_Intermediate_Syllabus 2008_Jun2015_Set 3

SUGGESTED SOLUTION INTERMEDIATE N 2018 EXAM

COMMERCE & LAW PROGRAM DIVISION (CLPD) ANSWER KEY TO CS-EXECUTIVE DECEMBER-2014 (ATTEMPT) CODE-C SUBJECT : COST & MANAGEMENT ACCOUNTING

MTP_Intermediate_Syl2016_June2018_Set 1 Paper 8- Cost Accounting

PAPER 8- COST ACCOUNTING

CS Executive Programme Module - I December Paper - 2 : Cost and Management Accounting

Paper T7. Planning, Control and Performance Management. Tuesday 8 December Certified Accounting Technician Examination Advanced Level

MTP_Intermediate_Syllabus 2016_Dec2017_Set 1 Paper 8 Cost Accounting

Postal Test Paper_P8_Intermediate_Syllabus 2016_Set 4 Paper 8- Cost Accounting

SERIES 4 EXAMINATION 2005 COST ACCOUNTING LEVEL 3. (Code No: 3016) FRIDAY 11 NOVEMBER

322 Roll No : 1 : Time allowed : 3 hours Maximum marks : 100

SUGGESTED SOLUTION INTERMEDIATE M 19 EXAM

Answer to MTP_Intermediate_Syl2016_June2018_Set 1 Paper 8- Cost Accounting

MOCK TEST PAPER INTERMEDIATE (IPC): GROUP I PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT

EOQ = = = 8,000 units Reorder level Reorder level = Safety stock + Lead time consumption Reorder level = (ii)

Free of Cost ISBN : Appendix. CMA (CWA) Inter Gr. II (Solution upto Dec & Questions of June 2013 included)

MTP_Intermediate_Syllabus 2012_Jun2017_Set 1 Paper 8- Cost Accounting & Financial Management

Higher National Diploma in Accountancy Third Year, First Semester Examination 2014 DA3101-Advanced Management Accounting

Write your answers in blue or black ink/ballpoint. Pencil may be used only for graphs, charts, diagrams, etc.

MANAGEMENT ACCOUNTING 2. Module Code: ACCT08004

B.COM. Part-III (HONS.) Sub. : ADVANCE COST ACCOUNTING MODAL PAPER-I. Time Allowed: 3 Hour Max. Marks: 100

Final Examination Semester 2 / Year 2011

PAPER 3 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING Answer all questions.

: 1 : 322. Question Paper Booklet No. Time Allowed : 3 hours Maximum marks : 100. Total number of questions : 100 Total number of printed pages : 24

Paper 8- Cost Accounting

MTP_Intermediate_Syl2016_June2017_Set 1 Paper 8- Cost Accounting

INTERMEDIATE EXAMINATION GROUP -II (SYLLABUS 2016)

Write your answers in blue or black ink/ballpoint. Pencil may be used only for graphs, charts, diagrams, etc.

Method of Costing (II) (Process & Operation Costing, Joint Products & By Products)

Historical information collected from a research in relation to sales of a company are as follows. Year Cost of promotion Sales revenue

BATCH All Batches. DATE: MAXIMUM MARKS: 100 TIMING: 3 Hours. PAPER 3 : Cost Accounting

MTP_Intermediate_Syl2016_June2018_Set 2 Paper 8- Cost Accounting

Write your answers in blue or black ink/ballpoint. Pencil may be used only for graphs, charts, diagrams, etc.

Standard Costing and Budgetary Control

INTERMEDIATE EXAMINATION

(AA22) COST ACCOUNTING AND REPORTING

Write your answers in blue or black ink/ballpoint. You can only use pencil for graphs, charts, diagrams, etc.

Sree Lalitha Academy s Key for CA IPC Costing & FM- Nov 2013

SUGGESTED SOLUTION IPCC May 2017 EXAM. Test Code - I N J

Postal Test Paper_P10_Intermediate_Syllabus 2016_Set 1 Paper 10- Cost & Management Accounting And Financial Management

MOCK TEST PAPER 1 INTERMEDIATE (IPC): GROUP I

PAPER 10: COST & MANAGEMENT ACCOUNTANCY

Costing Group 1 Important Questions for IPCC November 2017 (Chapters 6 9)

P8_Practice Test Paper_Syl12_Dec13_Set 3

PAPER 10- COST & MANAGEMENT ACCOUNTANCY

Required: (a) Calculate total wages and average wages per worker per month, under the each scenario, when

Solved Answer Cost & F.M. CA Pcc & Ipcc May

Please ensure your answers are written clearly, or marks may be lost. Do NOT open this paper until you are told to do so by the supervisor.

SUGGESTED SOLUTION INTERMEDIATE M 19 EXAM

The Institute of Chartered Accountants of India

Paper 8- Cost Accounting

PAPER 3 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING QUESTIONS

Answer to MTP_Intermediate_Syllabus 2012_Jun2017_Set 1 Paper 8- Cost Accounting & Financial Management

Suggested Answer_Syl12_Dec2014_Paper_8 INTERMEDIATE EXAMINATION GROUP I (SYLLABUS 2012)

December CS Executive Programme Module - I Paper - 2

COST ACCOUNTING (781) Sample Question Paper ClassXII

Answer to MTP_Intermediate_Syl2016_June2017_Set 1 Paper 8- Cost Accounting

Free of Cost ISBN : CMA (CWA) Inter Gr. II. (Solution upto June & Questions of Dec Included)

Suggested Answer_Syl12_Dec2015_Paper 8 INTERMEDIATE EXAMINATION

MTP_Intermediate_Syllabus 2008_Jun2015_Set 2

P8_Practice Test Paper_Syl12_Dec2013_Set 1

PTP_Intermediate_Syllabus 2012_Jun2014_Set 1

Cost Accounting. Level 3. Model Answers. Series (Code 3016)

MOCK EXAMINATION PRINCIPLES OF ACCOUNTS A-LEVEL PAPER 2

INTERMEDIATE EXAMINATION

ALL IN ONE MGT 402 MIDTERM PAPERS MORE THAN ( 10 )

MOCK TEST PAPER INTERMEDIATE (IPC): GROUP I PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT

TOPPER S INSTITUTE [COSTING] RTP 16 TOPPER S INSTITUE CA INTER COST MGT. ACCOUNTING - RTP

MID TERM EXAMINATION Spring 2010 MGT402- Cost and Management Accounting (Session - 2) Time: 60 min Marks: 47

Free of Cost ISBN : Scanner Appendix. CS Executive Programme Module - I December Paper - 2 : Cost and Management Accounting

MANAGEMENT ACCOUNTING

Free of Cost ISBN : IPCC Gr. I. (Solution of May & Question of Nov ) Paper - 3A : Cost Accounting

(59) MANAGEMENT ACCOUNTING & BUSINESS FINANCE

PAPER 3 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING QUESTIONS

Solution Paper 8 COST AND MANAGEMENT ACCOUNTING June Chapter 2 Material

PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I: COST ACCOUNTING QUESTIONS

MGT402 Cost & Management Accounting. Composed By Faheem Saqib MIDTERM EXAMINATION. Spring MGT402- Cost & Management Accounting (Session - 1)

FOUNDATION EXAMINATION

Paper T4. Accounting for Costs. Thursday 9 June Certified Accounting Technician Examination Intermediate Level

B.Com II Cost Accounting

Answer to MTP_Intermediate_Syllabus 2008_Jun2014_Set 1

Cost and Management Accounting

SAMVIT ACADEMY IPCC MOCK EXAM

Institute of Certified Management Accountants of Sri Lanka

81178 Seat No. Third Year B. B. A. Examination April / May 2003 Management Accountancy

Shree Guru Kripa s Institute of Management

MOCK TEST PAPER 1 INTERMEDIATE (IPC): GROUP I

Revisionary Test Paper_Intermediate_Syllabus 2012_Jun2014

6 Non-integrated, Integrated & Reconciliation of Cost and Financial Accounts


MOCK TEST PAPER INTERMEDIATE (IPC): GROUP I PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT

Revisionary Test Paper_Intermediate_Syllabus 2008_Jun2015

P10_Practice Test Paper_Syl12_Dec2013_Set 1

LCCI International Qualifications. Cost Accounting Level 3. Model Answers Series (3017)

THE PUBLIC ACCOUNTANTS EXAMINATION COUNCIL OF MALAWI 2014 EXAMINATIONS ACCOUNTING TECHNICIAN PROGRAMME PAPER TC9: COSTING AND BUDGETARY CONTROL

Preparing and using budgets

MTP_Intermediate_Syllabus 2012_Jun2017_Set 2 Paper 8- Cost Accounting & Financial Management

2016 EXAMINATIONS ACCOUNTING TECHNICIAN PROGRAMME PAPER TC9: COSTING AND BUDGETARY CONTROL

(AA22) COST ACCOUNTING AND REPORTING

PAPER 8- COST ACCOUNTING

Transcription:

Total No. of Questions - 6 Total No. of Printed Pages - 12 TimeAllowed-3Hours Ma,ximum - 100 Answers to questions are to be given only in English except in the case of candidates who have opted for Hindi Medium. If a candidate has not opted for Hindi Medium, his/trer ' 1. Answer the following : answers in Hindi will not be valued. Question No, I is compulsory. Attempt any four questions out of the remaining ffve questions. Working notes should form part of the answers. (a) IWs. SJ Private Limited manufacfires 20000 units of a product per =20 month. The cost of placing an order is ( 1,50Q The purchase price of the raw material is? 100 per kg. The re-order period is 5 to 7 weeks. The consumption of raw materials varies from 200 kg to 300 kg per week, the average consumption being 250 kg. The carrying cost of inventory is9.757oper annum r You are required to calculate t (i) Re-order quantity (ii) Re-order level (iii) Maximum level (iv) Minimum level 4xS (v) Average stock level PITTM P.T.O.

(2) (b) A manufacturing concern has provided following information related to fixed overheads :' Standard Actual ouputinamonth5000units4800units Fixed overheads < 5,00,000 ( 4'90'000 ComPute : (i) Fixed overhead variance (ii) Fixed overhead expenditure variance (iii) Fixed overhead volume variance (iv) Fixed overhead efficiency variance (c) Following details have been provided by lws AR Enterprises : (i) opening works-in-progless - 3000 units (7avo complete) (ii) Units introduced during the year - 17000 units (iii) Cost of the process (for the period) - <.33,\2'720 (iv) Transferred to next process - 15000 units (v) closing works-in-progress -zzi}units (807o complete) (vi) Normal loss is estimated at lzvo of total input (including units in process in the beginning). Scraps realise ( 50 per unit' Scraps are l00zocomplete. Using FIFO method, compute : (i) F,quivalent Production (ii) Cost Per equivalent unit PflJM 0

(3) (d) IWs. sd Private Limited commenced a contract on I't July 20L7 and the company closes its account for the yem on 31't March every year. The following information relates to the contract as on 31't March 2018. { 9,48,000 (i) Material issued (ii) Direct wages (iii) Prepaid direct wages as on 31.3.2018 (iv) Administrationcharges < 4,57,200 T 1,0g,000 < 7,2A,00A (v) A supervisor, who is paid T 50,000 per month, has devoted twothird of his time to this contract. (vi) A plant costing < 7,85,270 has been on the site for 185 days, its - working life is estimated at 9 years and its scrap value is < 75,000. The contract price is ( 42 laktrs. On 31't March 2018 two-third of the contract was completed. The Architect issued certificatp covenng 50Vo of the conffact price and the confractor had been paid ( l5.751akhs on account. Assuming 365 days in a year, you,lre required to : (i) Prepare a Contract Account showing work cost (ii) Calculate Notional Profit or Loss as on 31$ March 2018. 2. (a) Following details are provided by IWs ZtA hivate Limited for the 10 quarter ending 30 September, 2018 : (0 Direct expenses (ii) Direct wages being l75%o of factory overheads (iii) Cost of goods sold (iv) Selling & distribution overheads (v) Sales (vi) Administration overheads are LlVo offactory overheads ( 1,80,000 < 2,57,250 ( 18,75,000 ( 60,000 ( 22,10,000 PTT]M P.T.O.

(4) Stock details as per Stock Register : Particulars 30.06.201g 30.u).201g, t? ' - Raw material 2,45,600 2,08,000 Work-in-progrcss 1,70,800 1,90,000 Finished goods 3,10,000 Z,'IL,WO You are requiredto prepare a cost sheet showing : l (i) Raw material consumed (ii) Prime cost (iii) Factory cost (iv) Cost of goods sold (v) Cost of sales and profit O) A manufacturing company is producing a product 'A' which is sold in l0 the market at ( 45 per unit. The company has the capacity to produce 40000 units per year. The budget for the year 20lg-19 projects a sale of 30000 units. The costs ofeach unit are expected as under: Margin of safety is? 4,12,500 Materials Wages g Overheads 6 PTT}M ( lz

(5) You are required to : (i) calculate fixed cost and break-even point. (ii) calculate the volume of sales to earn profit of 20vo on sales. (iii) if management is willing to invest? 10,00,000 with an expected return of 20Vo, calculate units to be sold to earn this profit. (iv) Management expects additional sales if the selling price is reduced to? 44. calculate units to be sold to achieve the same profit as desired in above (iii). 3. (a) XYZ Ltd. has obtained an order to supply 48000 bearings per year 10 from a concern. On a steady basis, it is estimated that it costs ( 0:20 as inventory holding cost per bearing per month and the set-up cost per run of bearing manufacture is t 384. You are required to : (i) compute the optimum run size and,number of runs for bearing manufacfure. (i0 compute the interval between two consecutive nrns. (iii) find out the extra costs to be incurred, if company adopts a policy to manufacture 8000 bearings per run as compared to optimum run size. (iv) give your opinion regarding run size of bearing manufacture. Assume 365 days in a year. P.T.O.

7 (6) (b) M/s. HMB Limited is producing a product in 10 batches each of 15000 l0 units in a year and incurring following overheads their on : Amount (() Material procurement 22,50,000 Maintenance 17,30,000 Set-up 6,84,500 Quality control 5,14,800 The prime costs for the yffr amounted to ( 3,01,39,000. The company is-using currently the method of absorbing overheads on the basis of prime cost. Now it wants to shift to activity based costing. Information relevant to Activity drivers for a year are as under : Activity Driver Activity Volume No. of purchase orders 1500 Maintenance hours 9080 No. of set-ups 2250 No. of inspections 27LO The company has produced a batch of 15000 units and has incurred < 26,38,700 and < 3,75,2N on materials and wages respectively. The usage of activities of the said batch are as follows : Material orders 48 orders Maintenance hours 810 hours No. of set-ups 40 No. of inspections 25 You are required to : (i) find out cost of product per unit on absorption costing basis for the said batch. (i, determine cost driver rate, total cost and cost per unit of output of the said batch on the basis of activity based costing.

4. (7) PTT'M (a) The following balances were extracted from a Company's ledger as on 30fr June, 2018 : 10 Particulars Debit (?) Credit (?) Raw material control a/c 2,82,450 Work-in-progress control a/c 2383A0 Finished stock control a/c 3,92,500 General ledger adjustment a/c 9,13,250 Total 9,131250 9r131250 The following transactions took place during September,2018 i (i) Factory overheads - (ii) Goods finished - at cost (iii) Raw materials purchased quarter ended 30h ( allocated to work-in-progress 1,36,350 L3,76,ZOO L2,43,B1O (iv) Direct wages - allocated to work-in-progress 2,56,800 (v) Cost of goods sold 14,56,500 (vi) Raw materials - issued to production 13,60,430 (vii) Raw materials - credited by suppliers ZT,1AO (viii) Raw materials losses - inventory audit 6,000 (ix) Work-in-progress rejected (with no scrap value) 12,300 (x) Customer's returns (at cost) of finished goods 45,900 P.T.O.

(8) PTT]M You are required to prepare : (i) Raw material control a/c (ii) Work-in-progress control a/c (iii) Finished stock conhol a/c (iv) General ledger adjustment a/c (b) IWs XY Travels has been given a'25 km. long route to run an airconditioned Mini Bus. The cost of bus is ( 20,00,000. It has been insured @ 3Vo premium per annum while annual road tax amounts to < 36,000. Annual rcpairs will be ( 50,000 and the bus is likely to last for 5 years. The driver's salary will be ( 2,40,000 per annum and the conductor's salary will be ( 1,80,000 per annum in addition ta t0vo of the takings as commission (to be shared by the driver and" the conductor equally). Offrce and administration overheads will be a ( 3,18,000 per annum. Diesel and oil will be? 1,500 per 100 km. The bus will make 4 round trips carrying on an average 40 passengers on each trip. Assuming 25Vo profrt on takings and considering that the bus will run 10 on an average 25 days in a month, you are required to ; (i) prepare operating cost sheet (for the month), (ii) calculate fare to be charged per passenger km. ' PTTJM

). (e) PTL]M (a) An electronic gadget manufacturer has prepared sales budget for the 10 next few months. io tfri, r spect, following figures are available : Months Electronlc gadgets' sales Ianuary 5000 units February 6000 units March 7000 units April May 7500 units 80@ units To manufacture an electronic gadget, a standard cost of ( 1,500 is incurred and it is sold through dealers at an uniform price of ( 2,000 per gadget to customers. Dealers are given a discount of l1%o on selling price. Apart from other materials, two units of batteries are required to manufacture a gadget. The company wants to hold stock of batteries at the end of each month to cover 30Vo of next month's production and to hold stock of manufactured gadgets to cover 25Vo ofthe next month's sale. 32s}units of batteries and 1200 units of manufactured gadgets were in stock on 1't January. P.T.O.

(10) Required: (i) Prepare production budget (in units) for the month of January, February, March and April. (ii) Prepare purchase budget for batteries (in units) for the month of January,.February and March and calcurate profit for the quarter ending on March. O) (i) Following data have been extracted from the books of M/s. ABC s Private Limited : (i) Salary (each employee, per month) (ii) Bonus (iii) Employer's contribution to pf, ESI etc. (iv) Total cost at employees, welfare actiyities (v) Total leave permitted during the year (vi) No. of employees (vii) Normal idle time (viii) Abnormal idle time (due to failure of power supply) (ix) Working days per annum You are required to calculate : (i) Annual cost of each employee (ii) Employee cost per hour (iii) Cost of abnormal idle time, per employee t 30,000 25Vo of salary lsvo of salary. ( 6,61,500 per annum 30 days 175 70 hours per annum 50 hours 310 dals of 8 hours

(11) ' (ii) lws. NOP Limited has its own power plant and generates its own s power. Information regarding power requirements and power used are as follows: Production Dept. Service Dept. A B x Y (Horse porver hours) Needed capacity production 20,000 25,000 15,000 10,000 Used during the quarter ended September 2018 16,000 20,000 12,000 8,000 During the quarter ended September 2018, costs for generating power amounted to ( 12.60 lakhs out of which < 4.20lakhs was! considered as fixed cost. Service department X renders services to departments A, B, and Y in the ratio of 6:4:2whereas department Y renders services to department A and B in the ratio of 4:1'. The direct labour hours of department A and B are 67500 hours and 48750 hours respectively. Required: (r) Prepare overheads distribution sheet. (ii) Calculate factory overhead per labour hour for the dept. A and dept. B. PTITM P.T,O.

6. Answer any four of the following : (12) (a) Mention and explain types of responsibility cenffes. Marhs 4x5 =20 O) Explain obsolescence and circumstances under w}ich materials become obsolete. State the steps to be taken for its treatment. (c) state the bases of apportionment of following overhead costs : (r) Air-conditioning (ii) Time keeping : (iii) Depreciation of plant and machinery (iv) Power/steam consumption (v) Electric power (Machine operation) (d) How are By-products Eeated in Costing? (e) Explain 'Activity Based Budgeting'* I -1