Polypropylene Acid Waste Systems

Price List: AWMIUS0204191 Effective: February 4, 2019 Supercedes: January 15, 2018 PRICE LIST Polypropylene Acid Waste Systems IPEX USA LLC Customer Service Center Oakville Office PHONE (289) 881 0120 TOLL FREE (800) 463 9572 FAX (905) 844 0826 EMAIL: orders66@ipexamerica.com Denver Office PHONE (303) 373 1918 TOLL FREE (888) 461 5307 FAX (888) 461 5309 EMAIL: orders43@ipexamerica.com www.ipexna.com

Acid Waste Systems Product Listing Adapters 4, 9, 16, 17, 18 Hub Clamps 19 Bends 4, 5, 6, 10, 11, 17 Pipe 2, 3 Bushings 16 Pipe Clips 6, 17 Cables 19 Plugs 6, 15, 21 Caps 15 Screws 21 Cleanouts 15 Sediment Baskets 21 Connector Cables 19 Sink Outlets 7 Control Unit 18 Sink Overflows 7 Couplings 3, 4, 8, 10 Spanners 6, 15 Covers 21 Strainers 21 Cup Sinks 8, 9 Sweeps 10 Dilution Trap 9 Tail Piece Adapter 17 Elastolives 5 Taps 21 Flanges 16 Tees 5, 11, 12, 15 Floor Cleanout w- Nickel-Bronze Cover 21 Traps 4, 9, 17, 18 Floor Drains 20, 21 Trap Primer 21 Funnels 21 Union Nuts 6 Fuses 19 Vent Loops 4 Grooving Tools 6 Wyes 7, 8, 12, 13, 14 ***** For NeutraTanks, please see Price List # NEUTRAUS0204191 ****** Legend Comes With c/w Loose Nut LN Cast Iron CI Mechanical Joint MJ Drain, Waste and Vent DWV Male Pipe Thread MPT Enfield Electrofusion Joint EJ Male Straight Thread MST Female Pipe Thread FPT Side Inlet SI Female Straight Thread FST Spigot Sp Hub H Water Closet W.C. Long Radius L With Cleanout w/cleanout Labline Mechanical Joint LJ Price Class Codes Product Description Enfield pipe through 6" Enfield pipe 8 through 12" Labline fittings through 4" Enfield fittings through 6" Enfield fittings 8 through 12" Labline & Enfield tools and machines Floway drains through 6" Accessories Cobra Pipe Clips Discount Code 146KA 146KB 156KE 257KC 257KD 257KJ 237KI 156KF 437HF Discount Multiplier

Acid Waste Polypropylene Pipe Description Dimension Product Significant Box / Palette Class Unit Acid Waste Polypropylene Pipe, Flame Retardant Schedule 40-10 Ft Length Price Per Foot 1 1/2 2 146001 146002 W001 W002 180/1800 90/990 146KA 146KA $ $ 15.43 20.12 3 146003 W003 420 146KA $ 40.26 4 146004 W004 450 146KA $ 51.84 6 146006 W006 220 146KA $ 103.41 8 146008 W008 140 146KB $ 138.78 10 146010 W010 110 146KB $ 218.95 10' Lengths 12 146012 W012 60 146KB $ 278.67 Acid Waste Polypropylene Pipe, Flame Retardant Schedule 40-20 Ft Length Price Per Foot 1 1/2 146031 W001-20 3020 146KA $ 15.43 2 146032 W002-20 2100 146KA $ 20.12 3 146033 W003-20 1160 146KA $ 40.26 4 146034 W004-20 1020 146KA $ 51.84 6 146036 W006-20 440 146KA $ 103.41 20' Lengths Note: 20' Schedule 40 FR pipe is a non-stock item available upon special order. Acid Waste Polypropylene Pipe, Flame Retardant Schedule 80-10 ft Length Price Per Foot 10' Lengths 1 1/2 146013 WT001 180/1800 146KA $ 25.77 2 146014 WT002 90/990 146KA $ 31.96 3 146015 WT003 420 146KA $ 60.82 4 146016 WT004 450 146KA $ 79.38 2

Acid Waste Polypropylene Pipe Description Dimension Product Significant Box / Palette Class Unit Acid Waste Polypropylene Pipe, Black Non-Flame Retardant Schedule 40-20 ft Length Price Per Foot 1 1/2 146101 WB01 3020 146KA $ 11.58 2 146102 WB02 2100 146KA $ 15.43 3 146103 WB03 1160 146KA $ 31.72 4 146104 WB04 1020 146KA $ 40.26 6 146106 WB06 440 146KA $ 80.53 8 146108 WB08 280 146KB $ 120.69 10 146110 WB10 220 146KB $ 180.95 20' Lengths 12 146212 WB12 120 146KB $ 231.61 Acid Waste Polypropylene Pipe, Black Non-Flame Retardant Schedule 80-20 ft Length Price Per Foot 1 1/2 146201 WB1106 3020 146KA $ 18.20 2 146202 WB1107 2100 146KA $ 24.00 3 146203 WB1108 1160 146KA $ 44.12 4 146204 WB1109 1020 146KA $ 62.32 6 146206 WB1110 440 146KA $ 118.85 8 146208 WB1111 280 146KB $ 206.27 10 146210 WB1112 220 146KB $ 296.76 20' Lengths 12 146211 WB1113 120 146KB $ 437.90 Black Non-Flame Retardant Enfield Coupling 2 257147 L162B - 257KC $ 83.86 3 257150 L163B - 257KC $ 80.15 4 257154 L164B - 257KC $ 109.98 6 257158 L166B - 257KC $ 186.90 8 257161 L168B - 257KD $ 641.11 10 257143 L1610B - 257KD $ 683.01 12 257145 L1612B - 257KD $ 838.58 3

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Vent Loop U Bend 1 1/2 156101 W1011 30 156KE $ 100.10 2 156102 W1012 15 156KE $ 135.90 P Trap - 2 Piece 1 1/2 156103 W1021 15 156KE $ 145.50 2 156104 W1022 10 156KE $ 214.54 P Trap - 3 piece Long Radius 1 1/2 156711 WT11 10 156KE $ 148.32 2 156712 WT12 6 156KE $ 175.34 3 156713 WT13-156KE $ 358.51 4 156714 WT14-156KE $ 670.10 S Trap - 3 piece 1 1/2 156105 W1031 8 156KE $ 216.75 2 156106 W1032-156KE $ 335.82 Running Trap - 3 Piece 1 1/2 156107 W1041-156KE $ 199.74 2 156108 W1042-156KE $ 301.80 Threaded Adapter Male Thread x Female Thread 1 1/2 x 1 1/4 156121 W121 144 156KE $ 47.21 1 1/2 x 1 1/2 156131 W131 135 156KE $ 47.21 Male Adapter MJ x Male Thread 1 1/2 156141 W141T 105 156KE $ 45.21 2 156142 W142 48 156KE $ 55.70 3 156143 W143-156KE $ 168.00 4 156144 W144-156KE $ 241.29 Female Adapter MJ x Female Thread 1 1/2 156151 W151 75 156KE $ 45.21 2 156152 W152 48 156KE $ 55.70 Coupling 1 1/2 156161 W161 70 156KE $ 55.70 2 156162 W162 48 156KE $ 64.27 3 156163 W163-156KE $ 128.24 4 156164 W164-156KE $ 141.73 All Labline fittings are furnished assembled with Olives and Union Nuts. 4

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit 1/4 Bend (90 ) 1 1/2 156181 W181 30 156KE $ 64.27 2 156182 W182 20 156KE $ 81.35 3 156183 W183-156KE $ 218.40 4 156184 W184-156KE $ 262.00 1/8 Bend (45 ) 1 1/2 156191 W191 50 156KE $ 64.27 2 156192 W192 40 156KE $ 81.35 3 156193 W193-156KE $ 218.40 4 156194 W194-156KE $ 262.00 Sanitary Tee 1 1/2 156201 W201 24 156KE $ 99.55 2 156203 W202 12 156KE $ 145.62 3 156206 W203-156KE $ 379.50 4 156210 W204-156KE $ 479.83 Reducing Sanitary Tee 2 x 1 1/2 156204 W2021 12 156KE $ 126.56 3 x 1 1/2 156207 W2031-156KE $ 314.36 3 x 2 156208 W2032-156KE $ 333.68 4 x 1 1/2 156211 W2041-156KE $ 363.14 4 x 2 156212 W2042-156KE $ 383.31 4 x 3 156213 W2043-156KE $ 427.43 Cleanout Tee 1 1/2 156202 W2015 18 156KE $ 221.50 2 156205 W2025 12 156KE $ 268.00 3 156209 W2035-156KE $ 526.00 4 156214 W2045-156KE $ 651.50 Loose Nut 1/8 Bend (45 ) MJ x LN 1 1/2 156216 W211-156KE $ 60.50 2 156217 W212-156KE $ 72.81 3 156218 W213-156KE $ 191.66 4 156219 W214-156KE $ 241.29 Loose Nut 1/4 Bend MJ x LN 1 1/2 156291 W291 30 156KE $ 60.38 2 156292 W292 20 156KE $ 72.81 3 156293 W293-156KE $ 191.66 4 156294 W294-156KE $ 241.29 Assembled All Labline fittings are furnished assembled with Olives and Union Nuts. 5

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit No Heat Elastolive Yellow 1 1/2 156222 W221NH 60 156KF $ 7.24 2 156113 W222NH 40 156KF $ 8.73 3 156114 W223NH - 156KF $ 36.33 4 156115 W224NH - 156KF $ 53.55 Mechanical Joint Lubricant Union Nut Cleanout Plug Cobra Pipe Clip 1kg 156715 - - 257KJ $ 9.43 Approved for use with Labline & Plenumline mechanical joint systems 1 1/2 156231 W231 600 156KF $ 21.69 2 156232 W232 300 156KF $ 32.51 3 156233 W233 108 156KF $ 51.51 4 156234 W234 96 156KF $ 87.20 1 1/2 156241 W241 310 156KE $ 46.00 2 156242 W242 160 156KE $ 50.00 3 156243 W243 42 156KE $ 57.64 4 156244 W244-156KE $ 92.10 1 1/2 437345 434310 10 437HF $ 4.59 2 437346 434311 10 437HF $ 6.28 3 437348 434313 10 437HF $ 12.39 4 437349 434314 10 437HF $ 21.95 6 437432 434317 10 437HF $ 39.88 Grooving Tool & Spanner Combination Set 1 1/2 156263 W261CS - 257KJ $ 120.47 2 156265 W262CS - 257KJ $ 166.02 3 156267 W263CS - 257KJ $ 374.81 4 156269 W264CS - 257KJ $ 486.02 Spanner 1 1/2 156264 W2611-257KJ $ 36.00 2 156266 W2622-257KJ $ 50.00 3 156268 W2633-257KJ $ 72.00 4 156270 W2644-257KJ $ 105.00 All Labline fittings are furnished assembled with Olives and Union Nuts. 6

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Grooving Tool 1 1/2 156109 W261-257KJ $ 86.29 2 156110 W262-257KJ $ 116.29 3 156111 W263-257KJ $ 302.51 4 156112 W264-257KJ $ 378.87 Sink Outlet w/ Plug 1 1/2-3 3/8 156303 W301B (Black) - 156KE $ 145.62 1 1/2-2 7/8 156311 W311B (Black) - 156KE $ 255.00 156302 W3012B - 156KE $ 15.36 (Lock Nut For W301B) Sink Outlet Plug - 156301 W3011B (Black) - 156KE $ 30.95 Sink Overflow 1 1/2 156321 W321B (Black) - 156KE $ 30.90 45º Wye 1 1/2 156361 W371 18 156KE $ 82.44 2 156363 W372 12 156KE $ 120.79 3 156367 W373-156KE $ 355.74 4 156373 W374-156KE $ 408.14 Reducing 45º Wye 2 x 1 1/2 156364 W3721 11 156KE $ 145.62 3 x 1 1/2 156368 W3731-156KE $ 314.36 3 x 2 156369 W3732-156KE $ 355.74 4 x 1 1/2 156374 W3741-156KE $ 461.08 4 x 2 156375 W3742-156KE $ 408.14 4 x 3 156376 W3743-156KE $ 430.20 Combination Wye & 1/8 Bend 1 1/2 156362 W3715 18 156KE $ 145.62 2 156365 W3725 10 156KE $ 191.66 3 156370 W3735-156KE $ 383.31 4 156377 W3745-156KE $ 479.83 Reducing Combination Wye & 1/8 Bend 2 x 1 1/2 156366 W37251-156KE $ 191.66 3 x 1 1/2 156371 W37351-156KE $ 314.36 3 x 2 156372 W37352-156KE $ 355.74 4 x 1 1/2 156380 W37451-156KE $ 472.42 4 x 2 156378 W37452-156KE $ 407.00 4 x 3 156379 W37453-156KE $ 426.50 Assembled All Labline fittings are furnished assembled with Olives and Union Nuts. 7

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Double Wye 1 1/2 156381 W381 14 156KE $ 203.61 2 156383 W382 10 156KE $ 300.00 3 156387 W383-156KE $ 447.42 4 156392 W384-156KE $ 632.99 Reducing Double Wye 2 x 1 1/2 156384 W3821 8 156KE $ 441.75 3 x 1 1/2 156388 W3831-156KE $ 487.11 3 x 2 156389 W3832-156KE $ 520.10 4 x 1 1/2 156405 W3841-156KE $ 625.26 4 x 2 156393 W3842-156KE $ 641.24 4 x 3 156394 W3843-156KE $ 668.56 Double Wye & 1/8 Bend 1 1/2 156382 W3815 10 156KE $ 260.31 2 156385 W3825 6 156KE $ 373.71 3 156390 W3835-156KE $ 651.55 4 156395 W3845-156KE $ 882.47 Reducing Double Wye & 1/8 Bend 2 x 1 1/2 156386 W38251-156KE $ 379.38 3 x 1 1/2 156406 W38351-156KE $ 504.12 3 x 2 156391 W38352-156KE $ 538.14 4 x 1 1/2 156407 W38451-156KE $ 801.03 4 x 2 156396 W38452-156KE $ 829.38 4 x 3 156408 W38453-156KE $ 891.75 Reducing Coupling LN x MJ 2 x 1 1/2 156397 W3921 48 156KE $ 49.92 3 x 1 1/2 156398 W3931-156KE $ 122.71 3 x 2 156400 W3932 18 156KE $ 145.62 4 x 1 1/2 156399 W3941-156KE $ 170.10 4 x 2 156401 W3942-156KE $ 195.51 4 x 3 156402 W3943-156KE $ 241.29 Cup Sink Round 6 x 4 Deep 156403 W401B - 156KE $ 241.00 4 x 4 Deep 156404 W402-156KE $ 172.00 Assembled Loose nut not furnished All Labline fittings are furnished assembled with Olives and Union Nuts. 8

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Cup Sink Oval 6 x 3 156491 W497-156KE $ 241.00 9 x 3 156493 W498-156KE $ 266.00-156492 W4971-156KE $ 15.36 (Nut for W497) Glass Adapter MJ x Bead 1 1/2 156451 W451 105 156KE $ 111.34 2 156452 W452 48 156KE $ 143.04 3 156453 W453-156KE $ 227.06 4 156454 W454-156KE $ 316.75 Duriron Adapter MJ x Spigot 1 1/2 156461 W461 70 156KE $ 109.02 2 156462 W462 48 156KE $ 131.70 3 156463 W463-156KE $ 165.72 4 156464 W464-156KE $ 217.78 Universal Trap Female Thread x MJ 1 1/2 156501 W501 15 156KE $ 248.11 1 1/2 156511 W511 10 156KE $ 260.31-156512 W5112-156KE $ 99.55 (PP Base Only) - 156513 W5113-156KE $ 99.55 (Clear Base Only) - 156514 W5114-156KE $ 46.00 (O-Ring Gasket Only) - 156516 W5116-156KE $ 89.75 (Top Assembly For W501 & W511) Universal Trap, S-Type Female Thread x MJ 1 1/2 156502 W5015 10 156KE $ 232.76 1 1/2 156515 W5115 10 156KE $ 242.86 Dilution Trap 1 1/2 156601 W601-156KE $ 822.34 1 1/2 156611 W611-156KE $ 822.34 Transparent Base All Labline fittings are furnished assembled with Olives and Union Nuts. 9

Description Dimension Product Significant Pkg. Class Unit Coupling EJ Fabricated Repair Coupling EJ 90º Sweep EJ Flame Retardant Polypropylene Chemical Waste Fittings and Accessories 1 1/2 257141 L161-257KC $ 57.64 2 257146 L162 56 257KC $ 72.81 3 257149 L163-257KC $ 92.10 4 257153 L164-257KC $ 130.16 6 257157 L166-257KC $ 206.82 8 257160 L168-257KD $ 604.36 10 257142 L1610-257KD $ 720.18 12 257144 L1612-257KD $ 873.98 2 257148 L162R - 257KC $ 187.00 3 257152 L163R - 257KC $ 225.00 4 257156 L164R - 257KC $ 300.58 6 257159 L166R - 257KC $ 430.20 8 257295 L168R - 257KD $ 831.86 90º Sweep EJ x Sp 1/4 Bend (90 ) EJ 1 1/2 257171 L171 24 257KC $ 72.81 2 257172 L172-257KC $ 141.73 3 257173 L173-257KC $ 153.00 4 257174 L174-257KC $ 249.00 6 257175 L176-257KC $ 595.00 1 1/2 257281 L281 30 257KC $ 86.33 2 257282 L282 18 257KC $ 111.13 3 257283 L283-257KC $ 141.73 4 257284 L284-257KC $ 241.29 6 257286 L286-257KC $ 1,290.00 1 1/2 257181 L181 40 257KC $ 103.41 2 257184 L182 24 257KC $ 114.99 1/4 Bend (90 ) EJ x Sp 1 1/2 257291 L291 40 257KC $ 72.81 2 257293 L292 24 257KC $ 141.73 Fabricated 1/4 Bend (90 ) EJ 8 257185 L188-257KD $ 3,648.50 10 257182 L1810-257KD $ 4,212.49 12 257183 L1812-257KD $ 4,943.51 Enfield components should only be joined using Enfusion Control Units. 10

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit 1/8 Bend EJ 1 1/2 257191 L191 45 257KC $ 69.00 2 257194 L192 24 257KC $ 88.00 3 257195 L193-257KC $ 160.50 4 257196 L194-257KC $ 180.00 6 257197 L196 32 257KC $ 498.20 1/8 Bend EJ x Sp 1 1/2 257221 L211 60 257KC $ 55.70 2 257222 L212 24 257KC $ 59.50 3 257223 L213 8 257KC $ 128.00 4 257224 L214-257KC $ 148.00 6 257225 L216-257KC $ 408.14 Fabricated 1/8 Bend EJ 8 257198 L198-257KD $ 3,018.22 10 257192 L1910-257KD $ 3,363.82 12 257193 L1912-257KD $ 4,084.00 Sanitary Tee EJ 1 1/2 257201 L201 20 257KC $ 92.00 2 257206 L202 12 257KC $ 107.35 3 257208 L203-257KC $ 214.60 4 257211 L204-257KC $ 322.00 Fabricated Sanitary Tee EJ 6 257214 L206-257KC $ 2,145.47 8 257217 L208-257KD $ 2,525.00 10 257202 L2010-257KD $ 6,000.00 12 257205 L2012-257KD $ 6,720.00 Reducing Sanitary Tee EJ 2 x 1 1/2 257207 L2021 12 257KC $ 107.25 3 x 1 1/2 257209 L2031-257KC $ 191.25 3 x 2 257210 L2032-257KC $ 214.54 4 x 2 257212 L2042-257KC $ 289.70 4 x 3 257213 L2043-257KC $ 314.36 Assembled Enfield components should only be joined using Enfusion Control Units. 11

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Fabricated Reducing Sanitary Tee EJ Double Sanitary Tee EJ 6 x 2 257215 L2062-257KC $ 995.51 6 x 4 257216 L2064-257KC $ 1,053.41 8 x 3 257163 L2083-257KD $ 1,780.76 8 x 4 257218 L2084-257KD $ 1,780.76 8 x 6 257219 L2086-257KD $ 2,093.96 10 x 3 257164 L20103-257KD $ 4,134.02 10 x 4 257203 L20104-257KD $ 4,134.02 10 x 6 257204 L20106-257KD $ 4,402.33 10 x 8 257165 L20108-257KD $ 4,742.42 12 x 4 257166 L20124-257KD $ 4,458.51 12 x 6 257167 L20126-257KD $ 4,678.96 12 x 8 257168 L20128-257KD $ 4,803.07 12 x 10 257169 L201210-257KD $ 6,273.14 1 1/2 * 257351 L351-257KC $ 191.66 2 257352 L352 6 257KC $ 260.31 3 257354 L353 2 257KC $ 339.25 4 257357 L354-257KC $ 430.20 Reducing Double Sanitary Tee EJ 2 x 1 1/2 257353 L3521 6 257KC $ 264.17 3 x 1 1/2 257355 L3531 2 257KC $ 333.68 4 x 2 257358 L3542-257KC $ 678.38 4 x 3 257359 L3543-257KC $ 697.70 45º Wye EJ 1 1/2 257371 L371 20 257KC $ 99.55 2 257390 L372 12 257KC $ 137.87 3 257394 L373-257KC $ 230.00 4 257400 L374-257KC $ 332.50 6 257406 L376-257KC $ 863.00 Fabricated 45º Wye EJ 8 257414 L378-257KD $ 5,971.30 10 257372 L3710-257KD $ 6,740.32 12 257381 L3712-257KD $ 8,320.01 Reducing Wye EJ 2 x 1 1/2 257391 L3721-257KC $ 130.00 3 x 1 1/2 257395 L3731-257KC $ 242.00 3 x 2 257396 L3732-257KC $ 260.31 4 x 1 1/2 257425 L3741-257KC $ 402.77 4 x 2 257401 L3742-257KC $ 307.00 4 x 3 257402 L3743-257KC $ 325.00 6 x 1 1/2 257426 L3761-257KC $ 979.27 6 x 2 257407 L3762-257KC $ 520.50 6 x 3 257408 L3763-257KC $ 576.35 6 x 4 257409 L3764-257KC $ 598.41 Assembled While quantities last. Item obsolete once stock is depleted. * Fabricated Enfield components should only be joined using Enfusion Control Units. 12

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Fabricated Reducing Wye EJ Combination Wye & 1/8 Bend (Long Turn Wye) EJ Fabricated Combination Wye & 1/8 Bend EJ Reducing Combination Wye & 1/8 Bend EJ 8 x 2 257427 L3782-257KD $ 3,443.88 8 x 3 257415 L3783-257KD $ 3,595.45 8 x 4 257416 L3784-257KD $ 3,865.05 8 x 6 257421 L3786-257KD $ 4,751.70 10 x 3 257428 L37103-257KD $ 6,740.32 10 x 4 257373 L37104-257KD $ 6,740.32 10 x 6 257379 L37106-257KD $ 6,740.32 10 x 8 257380 L37108-257KD $ 6,843.46 12 x 3 257429 L37123-257KD $ 6,825.32 12 x 4 257383 L37124-257KD $ 7,022.60 12 x 6 257387 L37126-257KD $ 7,125.75 12 x 8 257388 L37128-257KD $ 7,279.55 12 x 10 257430 L371210-257KD $ 10,205.49 1 1/2 257389 L3715 13 257KC $ 121.00 2 257392 L3725 8 257KC $ 153.50 3 257397 L3735-257KC $ 260.00 4 257403 L3745-257KC $ 358.70 6 257410 L3765-257KC $ 1,190.16 8 257417 L3785-257KD $ 6,805.47 10 257374 L37105-257KD $ 9,488.94 12 257384 L37125-257KD $ 11,106.61 2 x 1 1/2 257393 L37251 10 257KC $ 145.62 3 x 1 1/2 257398 L37351-257KC $ 218.40 3 x 2 257399 L37352 4 257KC $ 230.00 4 x 1 1/2 257431 L37451-257KC $ 552.18 4 x 2 257404 L37452-257KC $ 325.00 4 x 3 257405 L37453-257KC $ 340.00 6 x 1 1/2 257432 L37651-257KC $ 1,185.00 6 x 2 257411 L37652-257KC $ 1,185.00 6 x 3 257412 L37653-257KC $ 1,185.00 6 x 4 257413 L37654-257KC $ 1,250.00 Fabricated Reducing Combination Wye & 1/8 Bend EJ 8 x 3 257418 L37853-257KD $ 4,968.85 8 x 4 257419 L37854-257KD $ 5,071.98 8 x 6 257420 L37856-257KD $ 5,149.78 10 x 3 257375 L371053-257KD $ 7,125.75 10 x 4 257376 L371054-257KD $ 7,254.21 10 x 6 257377 L371056-257KD $ 7,357.36 10 x 8 257378 L371058-257KD $ 7,909.25 12 x 4 257434 L371254-257KD $ 8,153.53 12 x 6 257435 L371256-257KD $ 8,307.33 12 x 8 257386 L371258-257KD $ 8,705.42 12 x 10 257385 L3712510-257KD $ 8,922.55 Assembled Enfield components should only be joined using Enfusion Control Units. 13

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Fabricated Double 45º Wye EJ Reducing Double 45º Wye EJ 2 257445 L382-257KC $ 250.00 3 257448 L383-257KC $ 340.00 4 257452 L384-257KC $ 531.20 6 257457 L386-257KC $ 2,575.00 8 257460 L388-257KD $ 4,751.70 10 257442 L3810-257KD $ 8,345.33 12 257462 L3812-257KD $ 9,336.93 6 x 4 257458 L3864-257KC $ 2,850.00 Fabricated Reducing Double 45º Wye EJ 2 x 1 1/2 257446 L3821-257KC $ 229.71 3 x 2 257449 L3832-257KC $ 383.31 4 x 2 257453 L3842-257KC $ 614.96 4 x 3 257454 L3843-257KC $ 614.96 8 x 6 257461 L3886-257KD $ 5,354.26 10 x 4 257443 L38104-257KD $ 6,715.00 10 x 6 257463 L38106-257KD $ 7,138.41 10 x 8 257444 L38108-257KD $ 7,601.64 12 x 4 257464 L38124-257KD $ 7,601.64 12 x 6 257465 L38126-257KD $ 7,601.64 12 x 8 257466 L38128-257KD $ 7,768.10 12 x 10 257467 L381210-257KD $ 8,705.42 Fabricated Double Combination Wye & 1/8 Bend EJ 2 257447 L3825-257KC $ 322.64 3 257450 L3835-257KC $ 383.31 4 257455 L3845-257KC $ 639.77 6 257459 L3865-257KC $ 3,300.00 Fabricated Reducing Double Combination Wye & 1/8 Bend EJ 3 x 2 257451 L38352-257KC $ 479.83 4 x 2 257456 L38452-257KC $ 835.57 Assembled Enfield components should only be joined using Enfusion Control Units. 14

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Cleanout w/ Plug Sp Cleanout Plug Male Thread Cleanout w/ Brass Plug Sp Fabricated Cleanout Tee EJ 1 1/2 257232 L241 75 257KC $ 61.50 2 257235 L242-257KC $ 72.81 3 257238 L243 12 257KC $ 134.02 4 257241 L244-257KC $ 260.31 6 * 257244 L246-257KC $ 521.19 1 1/2 257233 L241A - 257KC $ 45.00 2 257236 L242A - 257KC $ 50.00 3 257239 L243A - 257KC $ 57.64 4 257242 L244A - 257KC $ 92.10 2 257231 L2402-257KC $ 107.51 3 257247 L2403-257KC $ 162.19 4 257248 L2404-257KC $ 287.67 1 1/2 257551 L901-257KC $ 133.00 2 257552 L902-257KC $ 142.00 3 257553 L903-257KC $ 299.00 4 257554 L904-257KC $ 408.00 6 257555 L906-257KC $ 2,850.00 Fabricated Cap EJ 1 1/2 257541 L641-257KC $ 52.00 2 257543 L642-257KC $ 59.50 3 257544 L643-257KC $ 100.00 4 257545 L644-257KC $ 191.66 6 257546 L646-257KC $ 314.36 8 257547 L648-257KD $ 420.00 10 257542 L6410-257KD $ 1,438.53 12 257548 L6412-257KD $ 1,746.15 * Fabricated Enfield components should only be joined using Enfusion Control Units. 15

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Flange - ASA 150 EJ Fabricated Flange - ASA 150 EJ Fabricated Blind Flange - ASA 150 Reducing Bushing Sp x EJ Fabricated Reducing Bushing Sp x EJ Male Adapter EJ x Male Thread 1 1/2 257361 L361-257KC $ 188.12 2 257365 L362-257KC $ 202.97 3 257366 L363-257KC $ 408.14 4 257367 L364-257KC $ 518.44 6 257368 L366-257KC $ 708.72 8 257369 L368-257KD $ 1,272.07 10 257362 L3610-257KD $ 1,746.15 12 257363 L3612-257KD $ 1,899.95 8 257370 L3688-257KD $ 646.00 10 257360 L361010-257KD $ 894.29 12 257364 L361212-257KD $ 1,018.54 2 x 1 1/2 257472 L3912 80 257KC $ 65.09 3 x 1 1/2 257473 L3913-257KC $ 68.95 3 x 2 257476 L3923-257KC $ 72.81 4 x 1 1/2 257474 L3914-257KC $ 176.29 4 x 2 257477 L3924 24 257KC $ 153.34 4 x 3 257479 L3934 15 257KC $ 164.65 6 x 1 1/2 257475 L3916-257KC $ 228.81 6 x 3 257480 L3936-257KC $ 270.59 6 x 4 257483 L3946 10 257KC $ 300.58 8 x 3 257481 L3938-257KD $ 1,438.53 8 x 4 257484 L3948-257KD $ 1,901.77 8 x 6 257486 L3968 56 257KD $ 2,068.25 10 x 4 257482 L39410-257KD $ 2,567.66 10 x 6 257485 L39610-257KD $ 2,864.40 10 x 8 257487 L39810-257KD $ 3,955.52 12 x 4 257489 L39412-257KD $ 3,646.10 12 x 6 257490 L39612-257KD $ 3,865.05 12 x 8 257488 L39812-257KD $ 4,122.00 12 x 10 257471 L391012-257KD $ 4,288.48 1 1/2 257121 L141 84 257KC $ 46.06 2 257122 L142-257KC $ 53.78 Female Adapter EJ x Female Thread 1 1/2 257131 L151-257KC $ 68.95 2 257132 L152-257KC $ 72.81 Assembled While quantities last. Item obsolete once stock is depleted. Enfield components should only be joined using Enfusion Control Units. 16

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Glass Adapter EJ x Bead Cast Iron Adapter EJ x Sp P Trap - 2 piece EJ P Trap - 3 piece EJ Fabricated P Trap - 2 piece EJ 1/4 Bend EJ x LN 1 1/2 257501 L451 105 257KC $ 76.67 2 257502 L452 56 257KC $ 84.38 3 257503 L453 20 257KC $ 107.27 4 257504 L454-257KC $ 183.94 1 1/2 257511 L461-257KC $ 103.41 2 * 257512 L462 56 257KC $ 107.27 3 * 257513 L463-257KC $ 153.34 4 * 257514 L464-257KC $ 229.71 1 1/2 257104 L1021 16 257KC $ 145.80 2 257105 L1022 8 257KC $ 202.97 Shipped as 2 pieces 3 257563 LT13-257KC $ 383.31 4 257564 LT14-257KC $ 670.10 6 257565 LT16-257KC $ 1,742.84 Shipped as 3 pieces 8 257566 LT18-257KD $ 8,551.62 10 257562 LT110-257KD $ 10,142.15 Shipped as 2 pieces 1 1/2 257292 L291A - 257KC $ 96.27 Cobra Pipe Clip 1 1/2 437345 434310 10 437HF $ 4.59 2 437346 434311 10 437HF $ 6.28 3 437348 434313 10 437HF $ 12.39 4 437349 434314 10 437HF $ 21.95 6 437432 434317 10 437HF $ 39.88 3"/12" FRPP Tail Piece Adapter c/w Spig x Brass Compression Ring 1 1/2 x 3 257133 W303 1 257KC $ 84.00 1 1/2 x 12 257134 W3012 1 257KC $ 85.34 FRPP Swivel Sink Strainer Adapter with Viton Gasket Spg x Female Thread 1 1/2 257093 W551 25 257KC $ 73.00 1 1/2 ** 156450 W551G 25 156KE $ 77.00 * Fabricated ** Pregrooved for Labline. Nut and Olive are extra. Enfield components should only be joined using Enfusion Control Units. 17

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit 1 1/2" x 12" FRPP Swivel Sink Strainer Adapter with Viton Gasket Spg x Female Thread 1 1/2 x 12 257090 W5512 25 257KC $ 122.71 Universal Trap - Solid Base, P Type EJ x Female Thread 1 1/2 257521 L501-257KC $ 499.00 Universal Trap - Clear Base, P Type EJ x Female Thread 1 1/2 257531 L511-257KC $ 499.00 Universal Trap - Clear Base, S Type EJ 1 1/2 257533 L5115-257KC $ 303.70 Adapter EJ x LN 1 1/2 257111 L111 84 257KC $ 103.41 Adapter Female Thread x LN 1 1/2 257101 L101-257KC $ 66.21 Enfusion Control Unit - Complete Kit - 257279 EHHL2600 1 257KJ $ 5,995.00 Kit includes primary hub clamps, 1 1/2" thru 6", connector cable & 5' link cable. Enfield components should only be joined using Enfusion Control Units. 18

Flame Retardant Polypropylene Chemical Waste Fittings and Accessories Description Dimension Product Significant Pkg. Class Unit Enfusion Hub Clamp - New T Bar Handle & Bushing Stainless Steel T Handle for Hub Clamps 1 1/2 257254 L26101-257KJ $ 114.55 2 257256 L26102-257KJ $ 114.55 3 257257 L26103-257KJ $ 119.53 4 257258 L26104-257KJ $ 119.53 6 257259 L26106-257KJ $ 131.93 8 257260 L26108-257KJ $ 135.76 10 257255 L261010-257KJ $ 138.83 12 257262 L261212-257KJ $ 140.40 1 1/2 to 12 257125 L2610T - 257KJ $ 35.00 Oil Impregnated Brass Bushings for Clamps 1 1/2 to 12 257094 L2610B - 257KJ $ 3.75 Connector Cable - Green Fusion Machine - 257263 L26201-257KJ $ 318.09 New Connector Cable - Yellow Fusion Machine & Handheld Machine - 257585 L26801-257KJ $ 392.87 Connector Cable - EZ Connector Cable - Yellow Fusion Machine & Handheld Machine - 257294 L26901-257KJ $ 305.91 Link Cable c/w EZ Connector Link Cable c/w Link Lead 2 ft. EZ 257268 L26260-257KJ $ 75.89 5 ft. EZ 257269 L26261-257KJ $ 88.21 10 ft. EZ 257270 L26262-257KJ $ 244.35 15 ft. EZ 257271 L26263-257KJ $ 309.43 5 ft. 257265 L26251-257KJ $ 112.53 10 ft. 257266 L26252-257KJ $ 360.11 15 ft. 257267 L26253-257KJ $ 463.01 Extension Pin 1 1/2 " - 12" 257778 C3370890 257KJ $ 17.39 Fuses Priced Per Fuse 16 AMP 257801 P52690-257KJ $ 11.18 Enfield components should only be joined using Enfusion Control Units. 19

Polypropylene Drains Description Dimension Product Significant Pkg. Class Unit F1000 Series Adjustable Floor Drain 2 Enfield 237001 F1201L - 237KI $ 1,644.63 2 Labline 237075 F1201W - 237KI $ 1,644.63 3 237011 F1301P - 237KI $ 1,561.57 4 237021 F1401P - 237KI $ 1,602.51 6 237031 F1601P - 237KI $ 1,689.63 F1000 Series Adjustable Floor Drain w/ Sediment Basket 2 Enfield 237002 F1202L - 237KI $ 1,770.96 2 Labline 237076 F1202W - 237KI $ 1,770.96 3 237012 F1302P - 237KI $ 1,698.84 4 237022 F1402P - 237KI $ 1,747.95 6 237033 F1602P - 237KI $ 1,838.91 F1000 Series Adjustable Floor Drain w/ Sediment Basket & 6" Round Funnel 2 Enfield 237003 F1203L - 237KI $ 2,078.06 2 Labline 237077 F1203W - 237KI $ 2,078.06 3 237013 F1303P - 237KI $ 1,880.27 4 237023 F1403P - 237KI $ 1,811.77 6 237034 F1603P - 237KI $ 2,055.77 F1000 Series Adjustable Floor Drain w/ 6" Round Funnel Only 2 Enfield 237004 F1204L - 237KI $ 1,838.91 2 Labline 237078 F1204W - 237KI $ 1,838.91 3 237014 F1304P - 237KI $ 1,757.15 4 237024 F1404P - 237KI $ 1,811.77 6 237032 F1604P - 237KI $ 1,910.62 F4000 Series Non-Adjustable Floor Drain 2 Enfield 237041 F4201L - 237KI $ 336.00 2 Labline 237079 F4201W - 237KI $ 336.00 3 237051 F4301P - 237KI $ 407.00 4 237061 F4401P - 237KI $ 440.00 6 237071 F4601P - 237KI $ 550.00 F4000 Series Non-Adjustable Floor Drain w/ Sediment Basket 2 Enfield 237042 F4202L - 237KI $ 337.00 2 Labline 237080 F4202W - 237KI $ 337.00 3 237052 F4302P - 237KI $ 410.00 4 237062 F4402P - 237KI $ 440.00 6 237072 F4602P - 237KI $ 600.00 F4000 Series Non-Adjustable Floor Drain w/ Sediment Basket & 6" Round Funnel 2 Enfield 237044 F4203L - 237KI $ 435.00 2 Labline 237081 F4203W - 237KI $ 442.50 3 237053 F4303P - 237KI $ 510.00 4 237063 F4403P - 237KI $ 540.00 6 237073 F4603P - 237KI $ 650.00 F4000 Series Non-Adjustable Floor Drain w/ 6" Round Funnel Only 2 Enfield 237043 F4204L - 237KI $ 438.00 2 Labline 237082 F4204W - 237KI $ 440.00 3 237054 F4304P - 237KI $ 510.00 4 237064 F4404P - 237KI $ 540.00 6 237074 F4604P - 237KI $ 650.00 20

Polypropylene Drains Description Dimension Product Significant Pkg. Class Unit Floor Cleanout with Nickel-Bronze Cover (adjustable Cleanout) Sp 2 237173 F2COB 1 237KI $ 369.00 3 237174 F3COB 1 237KI $ 482.00 4 237175 F4COB 1 237KI $ 520.00 6 237177 F6COB 1 237KI $ 832.00 Allenhead Vandalproof Screws Blank Cover for F Series Drains Round Funnel Sediment Basket Strainer for F Series Drains Grid Strainers for F Series Drains Male Iron Pipe Threaded Outlet FPT Tap for Priming Drain Assembly Trap Primer 12" Length w/ 1/2" FPT Polypropylene Drain Options - 237045 P20035 100 237KI $ 70.22 Set of 3 screws F1000 Series 237814 P20034-237KI $ 107.27 F4000 Series 237813 P20033-237KI $ 104.64 6 237810 P20017-237KI $ 406.71 F1000 Series 237809 P20016-237KI $ 210.24 F4000 Series 237808 P20015-237KI $ 157.65 F1000 Series 237807 P20013-237KI $ 267.60 F4000 Series 237806 P20011-237KI $ 206.76 3 257091 - - 237KI $ 193.73 4 257092 - - 237KI $ 251.34 3/8 237430 - - 237KI $ 115.45 1/2 237429 - - 237KI $ 117.73 2 257126-1 237KI $ 130.00 3 257127-1 237KI $ 137.00 4 257128-1 237KI $ 145.00 21

NOTES

NOTES

NOTES

1. Scope IPEX USA LLC General Terms and Conditions of Sale All sales are subject to these general terms and conditions ( General T&Cs ). In addition, certain products may be subject to product-specific terms and conditions ( Specific T&Cs ) as posted on the Vendor s website at the time of sale. In the event of a conflict between the General T&Cs and the Specific T&Cs, the Specific T&Cs shall prevail. Purchaser s order is accepted subject to these General T&Cs, to the applicable Specific T&Cs and to any terms and conditions agreed to in writing by the Vendor and Purchaser. It is expressly agreed that any terms and conditions contained in the Purchaser s order or otherwise stipulated will be deemed for the Purchaser s internal use only and will not be binding on the Vendor. 2. Orders Purchaser s orders are conditional upon satisfactory credit approval by the Vendor. The Vendor will only accept orders in excess of $100 before taxes or such greater amount as may be specified for certain products. Once confirmed by the Vendor, orders for custom-made or non-stocked products cannot be cancelled, modified or returned, except with the Vendor s written consent and upon terms which provide for indemnification of the Vendor for the costs and expenses incurred. 3. Shipments, Title to the Products and Risk of Loss Any delivery schedules stipulated are approximate only and shipment will be made within reasonable proximity thereto. Under no circumstances will the Vendor be responsible for any damage whatsoever caused by delays in shipment, whether resulting from causes within or beyond the control of the Vendor. All shipments are F.O.B. origin (Vendor s location) (American standard) or Ex Works (Vendor s location) (ICC Incoterms), as indicated on the invoice. Freight prepaid orders, when applicable, will be delivered by the carrier of the Vendor s selection, unless the use of other carriers is agreed to in writing with the Purchaser. Risk of loss and title to the Products shall in any case pass to the Purchaser upon delivery of Products to the carrier at Vendor s shipping dock or upon the invoicing of the Products, whichever occurs first. Purchaser must verify quantities and report discrepancies within 2 business days of receipt. 4. Prices All prices quoted or published are F.O.B. origin (Vendor s location) or Ex Works (Vendor s location), and do not include any sales, use, excise or any other tax or levy imposed by any present or future law, regulation or other order, on any of the Products. Published prices are subject to change without notice until orders are accepted by the issuance of an order confirmation, whereupon prices will remain firm for those shipments that take place within the 30-day period following the date of the order confirmation. For specific projects, contracts or quotations, the Vendor may agree in writing to protect prices for an extended period

IPEX USA LLC General Terms and Conditions of Sale of time. Each order may be shipped in whole or in part at the Vendor s discretion. Each shipment made will be immediately invoiced. In order to be exempt of the applicable taxes, Purchaser must provide the Vendor with applicable tax exemption certificates or other documents. 5. Terms of Payment Unless other terms of payment are agreed to in writing by the Vendor, payment is due upon delivery of the Products. If applicable, cash discounts, expressed as a percentage, are calculated on the net invoiced prices before any taxes, freight or other charges and can only be deducted from payment if the Vendor receives payment from Purchaser on or prior to the due date. Net 30 days means that payment is due within 30 days of the date of invoice and no cash discount is applicable. Overdue accounts shall bear interest at a rate of 18% per annum. The granting of credit by the Vendor is at all times based on its evaluation of the Purchaser s financial condition. If such financial condition does not justify continuance of shipment on credit, the Vendor may require full or partial payment in advance. 6. Return of Products The Vendor may accept the return of Products, at its sole discretion, but is subject in all cases to the following: a) prior to returning any Products, the Purchaser must obtain a Return Material Authorization (RMA) number from the Vendor; b) Products must be returned freight prepaid, unless otherwise authorized by the Vendor; and c) Products must be received in good saleable condition and, if required, in full carton quantities and in their original packaging. A minimum return charge of 25% of the purchase price will be applied against any credit issued pursuant to the return of Products, except in the case of a Vendor shipping error. The Vendor may apply additional charges against the credit to cover remarketing costs or may refuse to issue any credit, but will advise the Purchaser accordingly. Certain Products, such as pressure pipe and fittings, custom-made products or configurations, perishable products, obsolete products, large quantities or other specialty products cannot be returned. In certain circumstances, the Vendor may direct that Products be destroyed for credit rather than returned. 7. Changes to Products The Vendor reserves the right to make changes or improvements to its Products without assuming any further obligation. 8. Patent Rights If any claim is made against the Purchaser based on the allegation that any of the Products sold by the Vendor constitute an infringement of any patent, the Purchaser shall notify the Vendor immediately. The Vendor shall have the right, at its own option and expenses, to take any actions to protect and defend its rights.

9. Force Majeure IPEX USA LLC General Terms and Conditions of Sale The Vendor shall in no event be responsible or liable for any non-performance or delay in performance hereunder or any loss or damage of any kind or nature whatsoever, direct or indirect, suffered by the Purchaser, subsequent purchasers, end-users of the Products or any other person, as a result of any causes beyond the reasonable control of the Vendor including, without limitation, fires, floods, civil commotion, riots, wars, acts of God, embargos, acts of or acts authorized by any government or standard organizations, adoption of laws or regulations, strikes/slowdowns, lock-outs/walk-outs, labor shortages, accidents, breakdowns, power outages, delays in shipments, manufacture, transportation or delivery of goods or materials, shortages of materials or supplies, or price alterations. 10. Governing Law This agreement and all rights and obligations hereunder shall be governed by the laws of North Carolina and all actions commenced pursuant hereto shall be brought in a court of competent jurisdiction residing in Charlotte, North Carolina. The parties agree to exclude this Agreement and the purchases made thereunder from the application of the United Nations Convention on the Sale of Goods. 11. Non-waiver No delay, failure, change or waiver by the Vendor to exercise any one or more of its rights under these terms and conditions of sale shall be construed or shall operate to be a waiver thereof or a continuing waiver of such terms and conditions. 12. Warranty and Limitation of Liability 12.1 The Vendor warrants that its Products are, at the time of their sale by Vendor, free from defects resulting from Vendor s faulty manufacturing. 12.2 THERE IS NO WARRANTY, CONDITION OR REPRESENTATION OF ANY NATURE WHATSOEVER, EXPRESSED OR IMPLIED, BY STATUTE OR OTHERWISE, EXCEPT AS HEREIN CONTAINED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS OF THE PRODUCTS FOR A SPECIAL PURPOSE AND ANY OTHER WARRANTY OF QUALITY ARE EXPRESSLY DISCLAIMED. 12.3 The Vendor will, at its entire discretion either refund or replace with a Product of the same type and size as the original Product, free of charge, including shipping charges at the original point of delivery, any Product which is found to breach this Limited Warranty. 12.4 THIS LIMITED WARRANTY IS VALID ONLY AND WILL ONLY APPLY IF ALL OF THE FOLLOWING CONDITIONS ARE MET: The Product must have been used only in applications and under conditions (handling, installation, testing, use, water temperature, maintenance, repairs, etc.) that are strictly in compliance with these terms and conditions and the Vendor s

IPEX USA LLC General Terms and Conditions of Sale technical manuals and installation instructions currently available from the Vendor at the time of installation. The alleged defect must not be due to faulty installation, misalignment of products, vibration, ordinary wear and tear, corrosion, erosion, U.V. degradation, incompatible lubricants, pastes and thread sealants, unusual pressure surges or pulsation, water hammer, temperature shocking, or fouling. The Product must have been installed in good and workmanlike manner consistent with the Vendor s technical manuals and installation instructions currently available from the Vendor at the time of installation, and with the state of the art industry standards and practices, and in conformance with all applicable laws and regulations. The Product must have not been altered, damaged or modified after leaving the Vendor s premises, and must have been used in no more than one installation, show no evidence of disassembly or tampering, and have not been subjected to abnormal operating conditions, accident, abuse, misuse, unauthorized alteration, or repair. The Product must not have been subject to acts of nature such as earthquakes, fire, flood, or lightning, or any other event of force majeure. The Product must not have been subject to freezing inside any of its components. If the Product is perishable, the Product must have been used prior to the expiration date as indicated on the Product. The Claimant must notify the Vendor in writing within ten (10) days of when the alleged defect was discovered, or should have been discovered in the exercise of ordinary care, and the alleged defective Product must be promptly returned to the Vendor. Notice of an alleged defective Product under this Limited Warranty must be directed to your local IPEX Customer Service representative. Claimant must provide documentary evidence of failure, as well as the failed components themselves or representative samples of the Product that is alleged to have failed, and must agree to allow a meaningful and reasonable opportunity for Vendor to inspect the system in which the alleged defective Product was installed. 12.5 ANY LIABILITY IN RESPECT TO THE PRODUCTS IS STRICTLY LIMITED TO THEIR REFUND OR REPLACEMENT AS HEREINBEFORE SPECIFIED AND THERE SHALL NOT, IN ANY EVENT, BE ANY LIABILITY FOR ANY LABOUR CHARGES OR DAMAGES, INCLUDING WITHOUT LIMITATION DIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES. 12.6 Without limiting the generality of the foregoing, any liability or responsibility is disclaimed: for labor, materials, and/or other expenses required to replace a defective Product;

IPEX USA LLC General Terms and Conditions of Sale for any damage resulting from a defective Product; for calculations, product drawings, or engineering design specifications; regarding the accuracy of any plans, drawings, or specifications furnished to the purchaser as part of the sale of any of its products; for loss or damage resulting from failure to abide by manufacturer s warnings, safety instructions, or other precautionary guidelines. 12.7 ANY CLAIM, WHETHER IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, WITH RESPECT TO OR ARISING OUT OF THE SALE, DELIVERY, INSTALLATION, REPAIR OR USE OF ANY PRODUCTS SOLD TO PURCHASER SHALL NOT IN ANY EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS FOUND TO BE DEFECTIVE. It is the responsibility of the owner to obtain and pay for emergency repairs. 12.8 No statement, conduct, or description by the Vendor, any of its affiliates, their respective representatives, distributors or agents, in addition to or beyond this Limited Warranty, shall constitute a warranty. This Limited Warranty may only be modified in a writing signed by an officer of the Vendor. 13. IMPORTANT Without limiting any other restriction in any of the Vendor s documentation, the Products must not be used in any way related to nuclear material or to a nuclear facility and must not be used or located in Iran, North Korea, Syria, Cuba or Sudan at any time. * Specific Terms and Conditions of sale: - AquaRise - Sceptalight IPEX USA LLC General Terms and Conditions of Sale (July 2018)

Acid Waste Systems Customer Service Centers Oakville Office 1425 North Service Rd. E., Unit 3 Oakville, ON L6H 1A7 PHONE (289) 881-0120 TOLL FREE (800) 463-9572 FAX (905) 844-0826 EMAIL: orders66@ipexamerica.com Denver Office 11402 East 53rd Ave., Suite 200 Denver, CO 80239 PHONE (303) 373-1918 TOLL FREE (888) 461-5307 FAX (888) 461-5309 EMAIL: orders43@ipexamerica.com Minimum Order: SPECIFIC TERMS OF SALE $100.00 net Acid Waste Fittings $250.00 net Acid Waste Pipe and Fittings. Freight: F.O.B. our shipping point. Freight allowed on orders of $7500.00 net or greater excluding Neutratank for the Eastern US. Freight allowed on orders of $10,000 net or greater excluding Neutratank for the Western US. This applies for a single shipment to one destination within the 48 contiguous states. Freight allowed orders will be sent by carrier of IPEX s choice. Additional charges may be made for Buyerdesignated carriers, special handling, packaging, airfreight and exports. Drop shipments may be limited by Seller to geographic areas specified by IPEX. Distribution Centers Charlotte, NC P.O. Box 240696-0696 10100 Rodney Street. Pineville, North Carolina 28134 Distributed By: Stockton, CA 2928 Boeing Way Stockton, California 95206 www.ipexna.com