GUJARAT STATE ELECTRICITY CORPORATION LIMITED Wanakbori Thermal Power Station, Taluka:Galteshwar, Dist:Kheda 388239. Ph. 91-2699-235522 Fax: 91-2699-235607, e-mail: wtps.ceg@gebmail.com; wtps.se-tech@gebmail.com, Website: www.gsecl.in AN ISO-9001:2008, ISO-14001:2004, OHSAS 18001:2007 Certified Power Plant CIN: U40100GJ1993SGC019988 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- WEB ENQUIRY RFQ 39736M(WE) SUPPLY OF KAOWOOL FOR BOILER UNIT-7 AT WTPS Sealed item rate supply quotations are invited & to be submitted by party, should contain details as below. Submission of your offer should contain details on your envelope as per below details, otherwise your offer may not be considered. PLEASE SUBMIT THIS ENTIRE TENDER DOCUMENT DULY FILLED AND SIGNED WITH COMPANY S SEAL AFFIXED ON IT. Estimated Cost () 30072/- Tender Fee(By DD only) () (Non refundable ) 500/- EMD(By DD/B.G. / SSI/NSIC Only)() (refundable ) 500/- Last Date Of Submission of Offer Up To 3.00 P.M (BY RPAD / SPEED POST & DATE OF ENQUIRY OPENING. AT 3:30 PM (If POSSIBLE) SECURITY DEPOSIT( TO BE DEPOSTED WITHIN 10 DAYS FROM THE DATE OF LOI) Validity Of Rates:- Delivery Period Sample Approval Required TEST CERTIFICATE REQUIRED AS PER TENDER NOTICE 10% OF THE END COST 120 Days From The Actual Date Of Opening Of The Enquiry 2 MONTHS NO YES Without EMD and TENDER FEE your offer is likely to be rejected. The DD shall be of the Dena-Bank in favour of GSECL and payable at Wanakbori. Yours Faithfully, CHIEF ENGINEER (C&O) GSECL, WTPS Note :- (1) Please submit your offer by RPAD / SPEED POST ONLY. Hand delivery & courier will not be acceptable. (2) Pl. Give your PAN No.. Pl. mention VAT No./ TIN No.. COMPANY ROUND SEAL RFQ-39736M (WE) Page 1 OF 7
TA-THASRA DIST. - KHEDA - 388239 SCHEDULE-B (Price Bid) Description: SUPPLY OF KAOWOOL FOR BOILER UNIT-7 AT WTPS Reference No.: WP/SUPPLY/TECH/RFQ-39736M/WE/BMD-3 E-Urja RFQ No.: 39736 Sr. No. 1 Description of materials with details of Specifications KAO WOOL PACKING, SIZE 1" X 2' X 25' OF AIR PREHEATER, TYPE 27 VI (T) 72" / 27 VI (T) 80" Quantity Required 21 UOM Numb er Quantit y Offered by Tender er Unit Ex- Work s In Packaging and Forwarding Charges per Unit in Excise Duty per unit in Sales Tax per unit in Insurance Charges per unit in Freight Charge s per unit in Unit End Cost Price in Total End Cost Price in TECHNICAL SPECIFICATION: SIZE: 1 INCH x 2 FOOT x 25 FOOT Classified Temp. 1260 degree C Colour: White Composition: Alumina: 42-47, Silica: 53-58, Zircon: Nil Fiber index: Min. 48 Mean Fiber Dia micron: 2.6-3.4 Melting point : 1760 degree C Tensile Strength KPA: For density 128 kg/m3 55 Min. 80 Type. Size Tolerance : Thickness : 00 mm, Width : 0 to +3 mm, Length : 0 to +150 mm. Permanent Linear shrinkage: 24 hrs. soaking period- max. 3.5 mm. Thermal conductivity W/mk: At 600 degree C mean temperature: 0.12. COMPANY ROUND SEAL RFQ-39736M (WE) Page 2 OF 7
TERMS AND CONDITIONS: Preferred Make Of kaowool: Rockwool/Lloyd/Minrock/Polybond M/s.Minwool, M/s.Thermax Heat Tracers, M/s.Lloyds Insultaion, M/s.Rockwool, M/s.U P Twiga Fibre Glass, M/s.Hydrabad Indusctries. 1) Bidder shall have to submit OEM / Authorized Dealership / Authorized Distributorship certificate along with the Technical Bid. Bidder shall have to confirm to submit purchase proof of the supplied items in case bidder is not OEM / Authorized dealer. 2) Bidder must have to submit past executed purchase order copy of GSECL/GEB or other SEB's, NTPC/IPP for same item otherwise offer may be liable for rejection without any correspondence 3) Quantity variation +/- 5 % in Sq. Mtr. is acceptable. 4) Supplier has to submit material test certificate including with all the technical specification. 5) Supplied material must be packed to avoid any transit damage. 6) Bidder shall have to submit copy of pan card with technical bid. COMPANY ROUND SEAL RFQ-39736M (WE) Page 3 OF 7
GENERAL TERMS AND CONDITIONS OF ENQUIRY 1. The quantities mentioned are approximate and may be less or more while placing of order. 2. Please mention your VAT No./ TIN NO. In your quotation / offer. Please mention the applicable taxes separately in SCHEDULE B only. 3. PENALTY TERMS: Any delay that may take place in supply and / or erection, testing and commissioning activities beyond contractual cutoff date / stipulated period in the order shall be subjected to penalty (not liquidated damages) at 1/2 % per week on delayed portion value (i.e. End cost) will be levied subject to maximum 10% of the contract value.(i.e. End cost) 4. GUARANTEE TERMS : If the goods/stores and equipment are found defective due to bad design materials or workmanship their same should be repaired or replaced by you free of charge if reported within 18 month of their receipt at site or 12 months from the date of commissioning of equipment whichever is earlier. 5. PAYMENT TERMS: (Payment shall be made by GSECL for the material supplied at 80 % against TRC within 30 days and balance 20% within 45 days after receipt of SR note from consignee from the date of receipt of materials at our site. 6. VALIDITY TERMS:- Validity of offer should be 120 days from the date of actual opening of the enquiry. 7. Conditional offer shall not be accepted. 8. The offer received after due date and time specified in the enquiry, will not be accepted. Once the offer submitted by the bidder before due date of submission, the bidder will not be allowed to submit revised/additional/modified/ other after opening of enquiry. 9. F.O.R.: The rates may please be quoted firm and for delivery at FOR our WANAKBORI TPS Store. 10. If required Suppler shall have to submit all the necessary documents like material Test certificate, other required test certificates, guarantee certificate, invoice etc along with supply. Without relevant required documents, further process of payment will not be initiated. 11. Supplier shall have to submit Invoice along with material to get C form wherever applicable. In short C form cannot be issued in absence of Invoice. 12. JURISDICTION: (a) All disputes pertaining to this shall be at Thasra or Dakor court. (b) Arbitration: All questions, disputes or differences whatsoever which may at any time arise between the parties to this agreement touching the agreement or subject matter thereof, arising out of or in relation there to and whether as to construction or otherwise shall be referred to the decision of the Sole Arbitrator, appointed by the CMD, GSECL, for that purpose, who shall be a retired High Court Judge or retired District and Sessions Judge, and the decision of the said Arbitrator shall be final and binding upon the parties. Reference to the arbitrator shall be governed by the provisions of Indian Arbitration & Conciliation Act. 1996 as amended from time to time and the rules made there under. The Arbitration proceeding shall be conducted at HO, GSECL, Vadodara or at such places as the Sole Arbitrator may be determined. The award of Sole Arbitrator shall be final & binding upon the parties. 13. FREE REPLACEMENT: If the materials supplied by successful bidder are not as per order specifications/sample and/or requirement the same will have to be replaced within 15 days at own risk &cost. 14. STATUTARY VARIATION: Any statutory increase or decrease in the above taxes/ duties if take place within the original contractual delivery period will be to the GSECL's account, subject to the claim being supported by documentary evidence. However, if decrease in the above takes place after the contractual delivery date the advantage will be passed on to the GSECL. COMPANY ROUND SEAL RFQ-39736M (WE) Page 4 OF 7
15. TERMINATION OF CONTRACT: The GSECL. Reserves the right to terminate the contract at any time without assigning any reason, whatsoever by giving a notice of one month. Supplier will not be entitled for any compensation / damages / losses whatsoever on account of the contract. 16. The exemption in payment of EMD shall be given to the small, Cottage & tiny industrial units registered under small scale industries of Gujarat state and holding subsequent registration with CSPO / NSIC / DGS&D registration certificates for manufacturing of item under tender. 17. REJECTION: Please note that if rejected material will not be collected by supplier from WTPS.store within one month, then rejected material shall be disposed & forfeited. The undersigned reserves the right to reject any or all the quotations without assigning any reasons thereof. CHIEF ENGINEER (C&O) GSECL, WTPS COMPANY ROUND SEAL RFQ-39736M (WE) Page 5 OF 7
CERTIFICATE-A ON FIRM S LETTER HEAD ONLY ENQUIRY FOR SUPPLY OF I / WE THE AUTHORISED SIGNATORY OF M/S HEREBY CERTIFY THAT M/S IS NOT RELATED WITH OTHER FIRMS WHO HAVE SUBMITTED QUOTATIONS FOR THE SAME UNDER THIS ENQUIRY. COMPANY ROUND SEAL RFQ-39736M (WE) Page 6 OF 7
FORM-A Please submit this form duly filled, signed and with company s round seal along with price bid in price bid cover. (1) Basic Cost. (2) E D Inclusive/Exclusive ( %) (3) Taxes: ST/CST/VAT/ Inclusive/Exclusive ( %) (4) Freight charges ( %) (5) Packing & Forwarding ( %) (6) Insurance charges ( % ) Other if any (7) Total (material END cost) (8) Rates offered for: Destination i.e. WTPS/Sevalia Rly.Stn./or Godhra at transporter s Godown BIDDER S SIGN. WITH SEAL & DATE COMPANY ROUND SEAL RFQ-39736M (WE) Page 7 OF 7