ABS Industrial System

Price List: DIALMIUS0210171 Effective: February 10, 2017 Supercedes: January 1, 2016 PRICE LIST ABS Industrial System IPEX USA LLC Customer Service Center Oakville Office (289) 881-0120 TOLL FREE (800) 463-9572 FAX (905) 844-0826 Denver Office (303) 373-1918 TOLL FREE (888) 461-5307 FAX (888) 461-5309 www.ipexna.com

Discount Product Description Discount Multiplier Code 346AA 346AB 337IB 337IC 337ID 337HD 437HF Duraplus Pipe through 8" Duraplus Pipe 10 and 12" Duraplus Fittings through 8" Duraplus Fittings 10 and 12" Duraplus Valves through 8" Duraplus Cements & Cleaners Cobra Pipe Clips Viton is a registered trademark of DuPont Dow Elastomers. Price Class Codes Product Listing Adapters 9 Backing Rings 5 Bends 6, 7 Butterfly Valves 11 Caps 5 Couplings 3 Elbows 6 Flanges 3, 4, 5 Gaskets 4 MEK Cleaner 12 Nipples 8 Pipe 2 Pipe Clips 3 Plugs 10 Reducer Bushings 8 Reducer Couplers 9 Saddles 7 Solvent Cement 12 Strainers 11 Tees 7 Transition Coupling 11 Unions 5, 6, 11 Valves 10, 11 Wyes 7, 8

Description Size Product Significant Std. Length Class Unit inches Code Number feet Code Price The standard pipe length is 10 feet for 3/8" and 1/2" pipe. The standard length for all other sizes is 20 feet. Pipe - 90 psi at 73º F 10 346034 542114 20 346AB $ 72.74 12 346035 542115 20 346AB $ 97.89 Pipe - 145 psi at 73º F 1 346003 511104 20 346AA $ 2.18 1 1/2 346004 511106 20 346AA $ 4.42 2 346005 511107 20 346AA $ 6.77 3 346007 511109 20 346AA $ 15.15 4 346008 511110 20 346AA $ 22.62 6 346009 511112 20 346AA $ 44.60 8 346010 511113 20 346AA $ 70.22 Pipe - 180 psi at 73º F 1 346013 512104 20 346AA $ 2.76 1 1/4 346014 512105 20 346AA $ 4.19 1 1/2 346015 512106 20 346AA $ 5.40 2 346011 512107 20 346AA $ 8.67 3 346016 512109 20 346AA $ 18.42 4 346017 512110 20 346AA $ 29.74 6 346012 512112 20 346AA $ 53.62 Note: 180 psi pipe is a non-stock item available upon special request. Minimum runs are required. Please consult with customer service. Pipe - 230 psi at 73º F 3/8 346018 513101 10 346AA $ 1.67 1/2 346019 513102 10 346AA $ 1.81 3/4 346020 513103 20 346AA $ 2.24 1 346021 513104 20 346AA $ 2.99 1 1/4 346022 513105 20 346AA $ 4.65 1 1/2 346023 513106 20 346AA $ 6.14 2 346024 513107 20 346AA $ 9.30 3 346025 513109 20 346AA $ 19.92 4 346026 513110 20 346AA $ 32.55 Class "T" - Suitable for Threading 3/8 346033 514101 10 346AA $ 2.01 1/2 346027 514102 10 346AA $ 2.24 3/4 346028 514103 20 346AA $ 2.69 1 346029 514104 20 346AA $ 3.79 1 1/4 346030 514105 20 346AA $ 5.57 1 1/2 346031 514106 20 346AA $ 7.23 2 346032 514107 20 346AA $ 10.62 2

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price Saddle Clip - Polypropylene Cobra Pipe Clip - Polypropylene Note: * 3/8" ½" and ¾" and 1" pipe clips are supplied without retaining bands. Coupling Soc Flange - Full Face, Drilled ASA 150 Soc 3/8 337453 455101 10 337IB $ 3.10 1/2 337454 455102 10 337IB $ 3.39 3/4 337455 455103 10 337IB $ 3.79 1 337456 455104 10 337IB $ 4.59 1 1/4 337457 455105 10 337IB $ 5.05 1 1/2 337458 455106 10 337IB $ 6.14 2 337459 455107 10 337IB $ 7.35 3 337460 455109 5 337IB $ 15.90 4 337461 455110 5 337IB $ 20.38 * 3/8 437340 434305 10 437HF $ 2.30 * 1/2 437341 434306 10 437HF $ 2.41 * 3/4 437342 434307 10 437HF $ 2.69 * 1 437343 434308 10 437HF $ 3.79 1 1/4 437344 434309 10 437HF $ 4.01 1 1/2 437345 434310 10 437HF $ 4.36 2 437346 434311 10 437HF $ 5.97 2 1/2 437347 434312 10 437HF $ 8.78 3 437348 434313 10 437HF $ 11.77 4 437349 434314 10 437HF $ 20.85 6 437432 434317 10 437HF $ 37.89 3/8 337021 100101 10 337IB $ 4.42 1/2 337022 100102 10 337IB $ 4.59 3/4 337023 100103 10 337IB $ 4.94 1 337024 100104 10 337IB $ 6.60 1 1/4 337025 100105 10 337IB $ 9.36 1 1/2 337026 100106 10 337IB $ 12.12 2 337027 100107 10 337IB $ 17.40 3 337028 100109 5 337IB $ 45.69 4 337029 100110 5 337IB $ 66.48 6 337030 100112 5 337IB $ 147.66 8 337031 100113 1 337IB $ 315.76 10 337032 100114 1 337IB $ 436.15 12 337033 100115 1 337IB $ 560.73 Note: A metal backing ring must be used with this flange. 1/2 337353 322102 10 337IB $ 32.55 3/4 337354 322103 10 337IB $ 32.55 1 337355 322104 10 337IB $ 33.59 1 1/4 337356 322105 10 337IB $ 41.80 1 1/2 337357 322106 10 337IB $ 44.60 2 337358 322107 10 337IB $ 59.42 3 337359 322109 5 337IB $ 103.11 4 337360 322110 5 337IB $ 126.65 6 337361 322112 1 337IB $ 207.71 3

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price Flange - Full Face, Undrilled Soc Note: A metal backing ring must be used with this flange. 1/2 337226 129102 10 337IB $ 27.39 3/4 337227 129103 10 337IB $ 27.39 1 337228 129104 10 337IB $ 28.08 1 1/4 337229 129105 10 337IB $ 34.96 1 1/2 337230 129106 10 337IB $ 37.37 2 337231 129107 10 337IB $ 49.72 3 337232 129109 5 337IB $ 86.29 4 337233 129110 5 337IB $ 105.98 6 337234 129112 1 337IB $ 177.45 Gasket - Full Face, Drilled ASA 150, EPDM 1/2 337439 426102 10 337IB $ 5.97 3/4 337440 426103 10 337IB $ 5.97 1 337441 426104 10 337IB $ 6.60 1 1/4 337442 426105 10 337IB $ 8.15 1 1/2 337443 426106 10 337IB $ 9.82 2 337444 426107 10 337IB $ 12.69 3 337445 426109 5 337IB $ 17.51 4 337446 426110 5 337IB $ 23.59 6 337447 426112 1 337IB $ 37.72 Flange - Stub Soc Note: A metal backing ring must be used with this flange. 2 337235 135107 10 337IB $ 39.04 3 337236 135109 5 337IB $ 76.53 4 337237 135110 5 337IB $ 94.73 6 337238 135112 1 337IB $ 175.57 8 337239 135113 1 337IB $ 234.01 10 337243 139114 1 337IC $ 259.38 12 337244 139115 1 337IC $ 292.80 Gasket - Stub Flange, EPDM 2 337448 431107 10 337IB $ 4.01 3 337449 431109 5 337IB $ 6.20 4 337450 431110 5 337IB $ 8.09 6 337451 431112 1 337IB $ 14.92 8 337452 431113 1 337IB $ 29.51 10 337422 411114 1 337IC $ 30.66 12 337423 411115 1 337IC $ 35.82 Note: It is essential that steel backing rings are used with all types of stub, full face and blind flanges. 4

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price Backing Ring - Galv., M.S. Drilled ASA 150 Note: For use with flanges. 1/2 337426 425102 1 337IB $ 25.37 3/4 337427 425103 1 337IB $ 25.37 1 337428 425104 1 337IB $ 28.36 1 1/4 337429 425105 1 337IB $ 29.17 1 1/2 337430 425106 1 337IB $ 30.66 2 337431 425107 1 337IB $ 37.09 3 337433 425109 1 337IB $ 55.58 4 337434 425110 1 337IB $ 65.45 6 337435 425112 1 337IB $ 103.34 8 337436 425113 1 337IB $ 149.27 10 337437 425114 1 337IC $ 338.89 12 337438 425115 1 337IC $ 468.42 Blind Flange - Drilled ASA 150 Note: A metal backing ring must be used with this flange. 3 337364 325109 5 337IB $ 121.71 4 337365 325110 5 337IB $ 165.52 6 337366 325112 1 337IB $ 297.44 8 337367 325113 1 337IB $ 429.20 10 337368 325114 1 337IC $ 532.32 12 337383 325115 1 337IC $ 615.39 Undrilled flanges are available at the same price as drilled. Order code 131. Cap Soc 3/8 337245 140101 10 337IB $ 4.08 1/2 337246 140102 10 337IB $ 4.59 3/4 337247 140103 10 337IB $ 5.40 1 337248 140104 10 337IB $ 9.82 1 1/4 337249 140105 10 337IB $ 11.08 1 1/2 337250 140106 10 337IB $ 17.05 2 337251 140107 10 337IB $ 21.36 3 337252 140109 5 337IB $ 56.67 4 337253 140110 5 337IB $ 75.78 Union - EPDM Seal Soc 3/8 337270 205101 10 337IB $ 18.09 1/2 337271 205102 10 337IB $ 22.05 3/4 337272 205103 10 337IB $ 24.63 1 337273 205104 10 337IB $ 32.15 1 1/4 337274 205105 10 337IB $ 39.27 1 1/2 337275 205106 10 337IB $ 55.91 2 337276 205107 10 337IB $ 73.95 3 337277 205109 5 337IB $ 195.71 4 337278 205110 5 337IB $ 256.06 5

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price Union ABS Soc x Brass Female Thread 1/2 337280 212102 10 337IB $ 34.96 3/4 337281 212103 10 337IB $ 50.18 1 337282 212104 10 337IB $ 64.94 1 1/4 337000 212105 10 337IB $ 74.00 1 1/2 337283 212106 5 337IB $ 99.38 2 337284 212107 5 337IB $ 166.89 * Discontinued when stock is depleted 90º Elbow Soc 3/8 337132 115101 10 337IB $ 6.20 1/2 337133 115102 10 337IB $ 6.66 3/4 337134 115103 10 337IB $ 7.81 1 337135 115104 10 337IB $ 10.62 1 1/4 337136 115105 10 337IB $ 18.03 1 1/2 337137 115106 10 337IB $ 23.26 2 337138 115107 10 337IB $ 35.19 3 337139 115109 5 337IB $ 60.91 4 337140 115110 5 337IB $ 87.26 6 337141 115112 1 337IB $ 324.37 8 337142 115113 1 337IB $ 545.40 * 10 337011 115114 1 337IC $ 791.81 * 12 337012 115115 1 337IC $ 967.83 * Only available in spigot x spigot. 45º Elbow Soc 3/8 337156 119101 10 337IB $ 9.82 1/2 337157 119102 10 337IB $ 11.65 3/4 337158 119103 10 337IB $ 12.17 1 337159 119104 10 337IB $ 15.10 1 1/4 337160 119105 10 337IB $ 22.10 1 1/2 337161 119106 10 337IB $ 28.64 2 337162 119107 10 337IB $ 39.55 3 337163 119109 5 337IB $ 64.94 4 337164 119110 5 337IB $ 103.11 6 337165 119112 1 337IB $ 284.42 8 337166 119113 1 337IB $ 529.78 * 10 337013 119114 1 337IC $ 535.71 * 12 337014 119115 1 337IC $ 681.58 * Only available in spigot x spigot. 90º Bend - Short Radius Soc 1/2 337148 118102 10 337IB $ 21.13 3/4 337149 118103 10 337IB $ 25.72 1 337150 118104 10 337IB $ 35.25 1 1/4 337151 118105 10 337IB $ 50.76 1 1/2 337152 118106 10 337IB $ 63.50 2 337153 118107 10 337IB $ 83.53 3 337154 118109 5 337IB $ 184.63 4 337155 118110 5 337IB $ 303.47 *** All Threads are BSP tapered unless otherwise noted *** 6

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price 90º Bend - Long Radius Sp 3 337320 309109 1 337IB $ 210.76 4 337321 309110 1 337IB $ 366.69 6 337322 309112 1 337IB $ 639.44 8 337323 309113 1 337IB $ 1,074.16 * 10 337384 309114 1 337IC $ 1,149.54 enter Line Radius = 4x * 12 337385 309115 1 337IC $ 1,724.57 * Please note centerline radius of 10" & 12" is 6D 45º Bend - Long Radius Sp 3 337330 310109 1 337IB $ 166.09 4 337331 310110 1 337IB $ 246.87 6 337332 310112 1 337IB $ 488.00 8 337333 310113 1 337IB $ 947.28 * 10 337386 310114 1 337IC $ 1,032.54 enter Line Radius = 4x * 12 337387 310115 1 337IC $ 1,325.97 * Please note centerline radius of 10" & 12" is 6D Tee Soc Saddle Soc 45º Wye Soc 3/8 337170 122101 10 337IB $ 5.51 1/2 337171 122102 10 337IB $ 7.46 3/4 337172 122103 10 337IB $ 9.36 1 337173 122104 10 337IB $ 14.13 1 1/4 337174 122105 10 337IB $ 20.15 1 1/2 337175 122106 10 337IB $ 31.18 2 337176 122107 10 337IB $ 45.01 3 337177 122109 5 337IB $ 79.12 4 337178 122110 5 337IB $ 112.93 6 337179 122112 1 337IB $ 364.28 8 337180 122113 1 337IB $ 621.76 * 10 337015 122114 1 337IC $ 927.31 * 12 337016 122115 1 337IC $ 1,209.83 * Only available in spigot tees. 2 x 1 1/4 337205 126129 1 337IB $ 48.91 3 x 1 337207 126132 1 337IB $ 77.50 3 x 1 1/2 337208 126134 1 337IB $ 77.50 4 x 1 337209 126137 1 337IB $ 103.22 4 x 2 337210 126140 1 337IB $ 103.22 6 x 1 337211 126143 1 337IB $ 128.77 6 x 1 1/2 337212 126145 1 337IB $ 128.77 6 x 2 337213 126146 1 337IB $ 128.77 1/2 337214 128102 10 337IB $ 30.66 3/4 337215 128103 10 337IB $ 33.18 1 337216 128104 10 337IB $ 35.19 1 1/4 337217 128105 10 337IB $ 45.01 1 1/2 337218 128106 10 337IB $ 57.13 2 337219 128107 10 337IB $ 86.98 7

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price 45º Wye - Fabricated Sp x Sp 3 337220 128109 1 337IB $ 798.01 4 337221 128110 1 337IB $ 832.46 6 337222 128112 1 337IB $ 989.14 8 337223 128113 1 337IB $ 1,344.34 10 337224 128114 1 337IC $ 1,543.55 12 337225 128115 1 337IC $ 2,063.87 Reducer Bushing Sp x Soc 1/2 x 3/8 337050 109121 10 337IB $ 6.20 3/4 x 1/2 337051 109122 10 337IB $ 6.66 1 x 1/2 337052 109123 10 337IB $ 7.23 1 x 3/4 337053 109124 10 337IB $ 7.23 1 1/4 x 1/2 337045 109116 10 337IB $ 7.81 1 1/4 x 3/4 337046 109117 10 337IB $ 7.81 1 1/4 x 1 337054 109125 10 337IB $ 7.81 1 1/2 x 1/2 337047 109118 10 337IB $ 10.91 1 1/2 x 3/4 337048 109119 10 337IB $ 10.91 1 1/2 x 1 337055 109126 10 337IB $ 10.91 1 1/2 x 1 1/4 337056 109127 10 337IB $ 10.91 2 x 3/4 337049 109120 10 337IB $ 15.55 2 x 1 337057 109128 10 337IB $ 15.55 2 x 1 1/4 337058 109129 10 337IB $ 15.55 2 x 1 1/2 337059 109130 10 337IB $ 15.55 3 x 1 1/2 337061 109134 5 337IB $ 39.67 3 x 2 337062 109135 5 337IB $ 39.67 4 x 3 337064 109141 5 337IB $ 58.50 6 x 4 337065 109147 1 337IB $ 135.49 8 x 6 337066 109152 1 337IB $ 264.66 10 x 8 337067 109157 1 337IC $ 679.63 12 x 10 337068 109162 1 337IC $ 760.52 Reducer Bushing Male Thread x Female Thread ** 3/4 x 1/2 337076 113122 10 337IB $ 10.85 ** Discontinued when stock is depleted Reducer Bushing Sp x Female Thread Nipple Sp x NPT 1/2 x 3/8 337072 111121 10 337IB $ 9.01 3/4 x 1/2 337073 111122 10 337IB $ 10.17 1 x 3/4 337074 111124 10 337IB $ 14.24 3/8 337340 314101 10 337IB $ 3.73 1/2 337341 314102 10 337IB $ 4.54 3/4 337342 314103 10 337IB $ 4.65 1 337343 314104 10 337IB $ 6.72 1 1/4 337344 314105 10 337IB $ 8.04 1 1/2 337345 314106 10 337IB $ 9.30 2 337346 314107 10 337IB $ 11.82 3 337347 314109 5 337IB $ 22.05 4 337348 314110 5 337IB $ 33.18 *** All Threads are BSP tapered unless otherwise noted *** 8

Description Size Product Significant Standard Class Unit inches Code Number Packaging Code Price Reducer Coupler Soc 1/2 x 3/8 337120 114121 10 337IB $ 5.74 3/4 x 1/2 337121 114122 10 337IB $ 6.20 1 x 3/4 337122 114124 10 337IB $ 7.64 1 1/4 x 1 337123 114125 10 337IB $ 11.77 1 1/2 x 1 1/4 337124 114127 10 337IB $ 14.18 2 x 1 1/2 337125 114130 10 337IB $ 23.54 3 x 2 337126 114135 5 337IB $ 54.26 4 x 3 337127 114141 5 337IB $ 85.72 6 x 4 337128 114147 1 337IB $ 275.29 8 x 6 337129 114152 1 337IB $ 368.81 10 x 8 337130 114157 1 337IC $ 948.49 12 x 10 337131 114162 1 337IC $ 1,052.00 Female Adapter Soc x FPT 1/2 337094 102102 1 337IB $ 12.17 3/4 337095 102103 1 337IB $ 14.13 1 337096 102104 1 337IB $ 16.59 1 1/4 337097 102105 1 337IB $ 23.54 1 1/2 337098 102106 1 337IB $ 31.63 2 337099 102107 1 337IB $ 41.63 3 337100 102108 1 337IB $ 109.26 4 337101 102109 1 337IB $ 153.75 Female Adapter Sp x Female Thread 1/2 337257 153102 10 337IB $ 12.17 3/4 337258 153103 10 337IB $ 14.13 1 337259 153104 10 337IB $ 16.54 1 1/4 337260 153105 10 337IB $ 21.70 1 1/2 337261 153106 10 337IB $ 31.63 2 337262 153107 10 337IB $ 41.63 Male Adapter Soc x MPT 1/2 337086 103102 1 337IB $ 5.80 3/4 337087 103103 1 337IB $ 8.32 1 337088 103104 1 337IB $ 11.14 1 1/4 337089 103105 1 337IB $ 16.48 1 1/2 337090 103106 1 337IB $ 25.32 2 337091 103107 1 337IB $ 27.50 3 337092 103108 1 337IB $ 93.64 4 337093 103109 1 337IB $ 131.87 Note: Systems using plastic threaded components are restricted to 180 psi. The use of PTFE sealing tape is recommended. *** All Threads are BSP tapered unless otherwise noted *** 9

VKD T DUAL BLOCK DUAL BLOCK VKD Description Size Product Significant Standard inches Code Number Packaging Plug Male Thread Class Code Unit Price 1/2 337264 155102 10 337IB $ 9.18 3/4 337265 155103 10 337IB $ 10.79 1 337266 155104 10 337IB $ 14.13 1 1/4 337267 155105 10 337IB $ 18.09 1 1/2 337268 155106 10 337IB $ 22.68 2 337269 155107 10 337IB $ 25.60 VXE True Union Ball Valve - EPDM Seals Soc 1/2 337810 902111 1 337ID $ 58.96 3/4 337811 902112 1 337ID $ 71.64 1 337812 902113 1 3371D $ 84.91 1 1/4 337813 902114 1 337ID $ 109.36 1 1/2 337814 902115 1 337ID $ 138.07 2 337816 902116 1 3371D $ 173.95 Note: Please refer to Valve price list for VXE Easy Fit Accessories VKD True Union Ball Valve - EPDM Seals Soc 3/8 337801 902101 1 337ID $ 88.48 1/2 337802 902102 1 337ID $ 90.66 3/4 337803 902103 1 337ID $ 105.75 1 337804 902104 1 337ID $ 132.50 1 1/4 337805 902105 1 337ID $ 165.92 1 1/2 337806 902106 1 337ID $ 216.67 2 337807 902107 1 337ID $ 349.18 3 337808 902109 1 337ID $ 654.03 4 337809 902110 1 337ID $ 1,370.52 SXE True Union Ball Check Valve - EPDM Seals Soc 1/2 337501 HOSXA102 1 3371D $ 122.39 3/4 337502 HOSXA102 1 3371D $ 144.75 1 337503 HOSXA102 1 3371D $ 151.35 1 1/4 337504 HOSXA102 1 3371D $ 252.58 1 1/2 2 337505 HOSXA102 1 3371D $ 276.25 337506 HOSXA102 1 3371D $ 347.26 10

Description Size Product Significant Standard inches Code Number Packaging VM Manual Diaphragm Valve-EPDM Diaphragm, T/U Soc Class Code Unit Price FK, EPDM Seals - Glass filled PP Body FK, Viton Seals - Glass filled PP body RV Y-Strainer EPDM Seals Soc Transition Union ABS Soc x Brass MPT 1/2 337110 H0UMA102 1 337ID $ 222.58 3/4 337111 H0UMA103 1 337ID $ 256.92 1 337112 H0UMA104 1 337ID $ 325.57 1 1/4 337113 H0UMA105 1 337ID $ 384.77 1 1/2 337114 H0UMA106 1 337ID $ 520.89 2 337115 H0UMA107 1 337ID $ 627.39 *3 337649 H0VMA209 1 337ID $ 1,124.57 *4 337116 H0VMA210 1 337ID $ 2,278.70 2 337651 680107 1 337ID $ 248.58 3 337652 680109 1 337ID $ 343.32 4 337653 680110 1 337ID $ 358.70 6 337654 680112 1 337ID $ 793.14 8 337655 680113 1 337ID $ 958.82 2 337656 681107 1 337ID $ 443.91 3 337657 681109 1 337ID $ 485.36 4 337658 681110 1 337ID $ 657.02 6 337659 681112 1 337ID $ 1,000.27 8 337660 681113 1 337ID $ 1,266.60 1/2 337739 846102 1 337ID $ 106.39 3/4 337740 846103 1 337ID $ 127.68 1 337741 846104 1 337ID $ 219.25 1 1/4 337742 846105 1 337ID $ 237.97 1 1/2 337743 846106 1 337ID $ 252.61 2 337744 846107 1 337ID $ 289.98 1/2 337103 217102 10 337IB $ 34.96 3/4 337104 217103 10 337IB $ 43.63 1 337109 217104 10 337IB $ 56.14 1 1/4 337191 217105 10 337IB $ 83.25 1 1/2 337192 217106 10 337IB $ 99.38 2 337193 217107 10 337IB $ 137.09 *** All Threads are BSP tapered unless otherwise noted *** Transition Coupling ABS Compression x Copper Compression Note: Other diaphragm materials available upon request. * 3" and 4" are spigot ended 1/2 337994 115102 1 337IB $ 40.20 3/4 337995 115103 1 337IB $ 37.36 1 337996 115104 1 337IB $ 54.32 1 1/4 337997 115105 1 337IB $ 68.45 1 1/2 337998 115106 1 337IB $ 95.72 11

Description Size Product Significant Standard inches Code Number Packaging Solvent Cement Class Code Unit Price Low VOC 1 pint 337085 461392 12 337HD $ 29.74 1 quart 337084 461393 12 337HD $ 48.51 MEK Cleaner 1 pint 337468 461397 12 337HD $ 15.50 1 quart 337469 461398 12 337HD $ 27.27 An indication of the number of joints likely to be made per quart of Duraplus cement is as follows (it is recommended that MEK Cleaner order equals one-half the quantity of solvent cement required): Size: inches 3/8-1 1 ¼ - 2 3 4 6 8 10 12 Joints: 290 144 48 32 16 10 4 4 12

NOTES

IPEX USA LLC www.ipexna.com ( Vendor ) Terms and Conditions of Sale 1. Scope All sales are subject to these general terms and conditions ( General T&C s ). In addition, certain products may be subject to product-specific terms and conditions ( Specific T&C s ) as posted on the Vendor s website at the time of sale. Purchaser s order is accepted subject to these General T&C s, to the applicable Specific T&C s and to any terms and conditions agreed to in writing by the Vendor and Purchaser. It is expressly agreed that any terms and conditions contained in the Purchaser s order or otherwise stipulated will be deemed for the Purchaser s internal use only and will not be binding on the Vendor. 2. Orders Purchaser s orders are conditional upon satisfactory credit approval by the Vendor. The Vendor will only accept orders in excess of $100 before taxes or such greater amount as may be specified for certain products. Once confirmed by the Vendor, orders for custom-made products manufactured to the Purchaser s specifications and orders for large quantities of non-inventoried products cannot be cancelled, modified or returned, except with the Vendor s written consent and upon terms which provide for indemnification of the Vendor for the costs and expenses incurred. 3. Shipments Delivery schedules stipulated in either the quotation ( Quotation ) or the order confirmation ( Order Confirmation ) are approximate only and shipment will be made within reasonable proximity thereto. Under no circumstances will the Vendor be responsible for any damage whatsoever caused by delays in shipment, whether resulting from causes within or beyond the control of the Vendor. All shipments are F.O.B. the Vendor s location per the American standard sales terminology or Ex Works per the Incoterms international rules applied to foreign trade contracts. The Vendor shall bear no liability for Products lost or damaged during transit. The Vendor may agree to different shipment terms as specified in the Quotation or in the Order Confirmation. Freight prepaid orders, when applicable, will be delivered by the carrier of the Vendor s selection, unless the use of other carriers is agreed to in writing with the Purchaser. Purchaser must verify quantities and report discrepancies within 2 business days of receipt. 4. Prices All prices quoted or published are F.O.B. the Vendor s location or Ex Works. Published prices are subject to change without notice until orders are accepted by the issuance of an Order Confirmation, whereupon prices will remain firm for those shipments that take place within the 30-day period following the date of the Order Confirmation. For specific projects, contracts or Quotations, the Vendor may agree in writing to protect prices for an extended period of time. Each order may be shipped in whole or in part at the Vendor s discretion. Each shipment made will be immediately invoiced. Quoted or published prices do not include any sales, use, excise or any other tax or levy imposed by any present or future law, regulation or other order, on any of the Products. The IPEX USA LLC General Terms & Conditions of Sale April 2010

Purchaser must provide the Vendor with tax exemption certificates or other documents, as required by the specific tax jurisdiction, in order not to be charged for any of the applicable taxes. 5. Terms of Payment Unless other terms of payment are agreed to in writing by the Vendor, payment is due upon delivery of the Products. If applicable, cash discounts, expressed as a percentage, are calculated on the net invoiced prices before any taxes, freight or other charges and can only be deducted from payment if the Vendor receives payment from Purchaser on or prior to the due date. Net 30 days means that payment is due within 30 days of the date of invoice and no cash discount is applicable. Overdue accounts shall bear interest at a rate of 18% per annum. The granting of credit by the Vendor is at all times based on its evaluation of the Purchaser s financial condition. If such financial condition does not justify continuance of shipment on credit, the Vendor may require full or partial payment in advance. 6. Title to the Goods Sold The Purchaser acknowledges and agrees that so long as the Products are in Vendor s possession, title to the Products shall remain with the Vendor until full payment therefore is received by the Vendor. The Purchaser agrees to defend, indemnify and save the Vendor harmless from any and all costs, expenses and damages arising out of any claims asserted against the Vendor pursuant to the exercise of its ownership rights or any recourse in payment of purchase price. 7. Return of Products The Vendor may accept the return of Products, subject to the following: a) prior to returning any Products, the Purchaser must obtain a Return Material Authorization (RMA) number from the Vendor, b) Products must be returned freight prepaid, unless otherwise authorized by the Vendor and c) Products must be received in good saleable condition and, if required, in full carton quantities and in their original packaging. A minimum return charge of 25% of the purchase price will be applied against any credit issued pursuant to the return of Products, except in the case of a Vendor shipping error. The Vendor may apply additional charges against the credit to cover remarketing costs or may refuse to issue any credit, but will advise the Purchaser accordingly. Certain Products, such as pressure pipe, custom-made configurations, obsolete products, excessive quantities or other specialty products cannot be returned. The Vendor may direct that Products be destroyed for credit rather than returned. 8. Changes to Products The Vendor reserves the right to make changes or improvements to its Products without assuming any further obligation. 9. Patent Rights If any claim is made against the Purchaser based on the allegation that any of the Products sold by the Vendor constitute an infringement of any U.S. or Canadian patent, the Purchaser shall notify the Vendor immediately. The Vendor shall have the right, at its own option and expenses, to take any actions to protect and defend its rights. IPEX USA LLC General Terms & Conditions of Sale April 2010

10. Force Majeure The Vendor shall in no event be responsible or liable for any non-performance or delay in performance hereunder or any loss or damage of any kind or nature whatsoever, direct or indirect, suffered by the Purchaser, subsequent purchasers, ultimate users of the goods or any other person, as a result of any causes beyond the reasonable control of the Vendor including, without limitation, price alterations, delay in shipments, strikes, lock-outs, fires, floods, civil commotion, riots, wars, acts of God, embargos, labor shortages, walk-outs, work slowdowns, accidents, breakdowns, delays in manufacture, transportation or delivery of goods or materials, shortages of materials or supplies, government acts or regulations or licensing action. 11. Governing Law This agreement and all rights and obligations hereunder shall be governed by the laws of the state of North Carolina and all actions commenced pursuant hereto shall be brought in a court of competent jurisdiction residing in the state of North Carolina. 12. Non-waiver No delay, failure, change or waiver by the Vendor to exercise any one or more of these terms and conditions of sale shall be construed or shall operate to be a waiver thereof or a continuing waiver of such terms and conditions. 13. Warranty and Limitation of Liability 13.1. All of the Vendor s Products are guaranteed against defects resulting from faulty workmanship or materials, subject to the limitations, exceptions, disclaimers and conditions stipulated hereunder or specified with respect to particular products and posted, updated or amended on the Vendor s website or stipulated in the product literature, 13.2. The Vendor will replace, free of charge, including shipping charges for the replacement Products, any Products which are found to be defective in workmanship or material, provided that the following conditions are met: 13.2.1. the Vendor is promptly notified in writing of such defect immediately upon discovery of same and the defective Product is promptly returned to the Vendor. Claimant must provide documentary evidence of failure, as well as the failed components or representative samples of Product(s) that are alleged to have failed and agree to inspection by the Vendor of the system in which the alleged defective Product(s) was/(were) installed. 13.2.2. the Products have not been altered or modified after leaving the Vendor s premises, have not been used in more than one installation, show no evidence of disassembly or tampering, are not and have not been subjected to abnormal operating conditions, accident, abuse, misuse, unauthorized alteration or repair and the defect is not due, without limitation, to faulty installation, misalignment of Products, vibration, ordinary wear and tear, corrosion, erosion, U.V. degradation, incompatible lubricants, pastes and thread sealants, unusual pressure surges or pulsation, water hammer, temperature shocking or fouling, acts of nature such as earthquakes, fire, flood or lightning or any other event of force majeure. IPEX USA LLC General Terms & Conditions of Sale April 2010

13.2.3. if the Product is perishable, the Product has been used or installed prior to the expiry date printed on the Product; 13.2.4. the Products have been used in applications or under conditions that are in accordance with the technical information or literature available from the Vendor. 13.3. Limited warranty periods may apply to certain products. Where applicable, these are posted on the Vendor s website. 13.4. The Vendor disclaims any liability or responsibility: 13.4.1. for labor, materials and/or other expenses required to replace the defective Product or to repair any damage resulting from the use thereof; 13.4.2. for the Purchaser s calculations, product drawings or engineering design specifications; 13.4.3. regarding the accuracy of any plans, drawings or specifications furnished to the purchaser as part of the sale of any of its products; 13.4.4. for loss or damage resulting from failure to abide by manufacturer s warnings, safety instructions or other precautionary guidelines. 13.5. ANY CLAIM OF LIABILITY ASSERTED AGAINST THE VENDOR WHETHER IN CONTRACT OR IN TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, WITH RESPECT TO OR ARISING OUT OF THE SALE, DELIVERY, INSTALLATION, REPAIR OR USE OF ANY PRODUCTS SOLD TO BUYER SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCTS FOUND TO BE DEFECTIVE. It is the responsibility of the owner to obtain and pay for emergency repairs. 13.6. THE VENDOR S LIABILITY IN RESPECT TO THE SALE IS STRICTLY LIMITED TO THE REPLACEMENT OF PRODUCTS AS HEREINBEFORE SPECIFIED AND THE VENDOR SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY DAMAGES WHETHER FOR THE LOSS OF USE OR BUSINESS INTERRUPTION OR ANY OTHER CLAIM FOR INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES. THERE IS NO WARRANTY, CONDITION OR REPRESENTATION OF ANY NATURE WHATSOEVER, EXPRESSED OR IMPLIED, BY STATUTE OR OTHERWISE, EXCEPT AS HEREIN CONTAINED AND THE VENDOR DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS OF ITS PRODUCTS FOR A SPECIAL PURPOSE OR OTHER WARRANTY OF QUALITY. * * * IPEX USA LLC General Terms & Conditions of Sale April 2010

IPEX USA LLC Customer Service Centers Oakville Office 1425 North Service Rd. E., Unit 3 Oakville, ON L6H 1A7 (289) 881-0120 TOLL FREE (800) 463-9572 FAX (905) 844-0826 Denver Office 11402 East 53rd Ave, Suite 200 Denver, CO 80239 (303) 373-1918 TOLL FREE (888) 461-5307 FAX (888) 461-5309 Distribution Centers Specific Terms of Sale Minimum Order: $100.00 net w/o Duraplus pipe. Not including transportation charges. $250.00 net with Duraplus pipe. Not including transportation charges. Freight: F.O.B. our shipping point. Freight allowed on orders of $6000.00 net or greater. This applies for a single shipment to one destination within the 48 contiguous states. Freight allowed orders will be sent by carrier of IPEX s choice. Additional charges may be made for Buyerdesignated carriers, special handling, packaging, airfreight and exports. Drop shipments may be limited by Seller to geographic areas specified by IPEX. Charlotte, NC P.O. Box 240696-0696 10100 Rodney Street. Pineville, North Carolina 28134 Houston, TX 2228 Wirtcrest, Suite H Houston, Texas 77055 Louisville, KY 2000 Watterson trail Louisville, Kentucky 40299 Stockton, CA 2928 Boeing Way Stockton, California 95206 Distributed By: www.ipexna.com Products manufactured by IPEX Inc. and distributed in the United States by IPEX USA LLC. Duraplus is a trademark of IPEX Branding Inc.