DOMESTIC PRICE LIST PIPE FITTING ACCESSORIES EFFECTIVE FEBRUARY 25, 2019 version: EFFECTIVE: FEBRUARY 25, 2019 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax: (951) 898-9561 HOUSTON CALL CENTER (U.S.) Toll Free: (800) 999-3009 Fax: (281) 558-9000 CAMBRIDGE CALL CENTER (CANADA) Toll Free: (888) 893-7827 Fax: (519) 650-1553 Star Pipe Products 4018 Westhollow Parkway Houston, Texas 77082 Corporate Headquarters 800.999.3009 Toll Free 281.558.3000 Telephone 281.558.9000 Fax
General Terms and Conditions GENERAL DELIVERY WARRANTY LIABILITY DISCLAIMER RETURNS SHIPMENTS PRODUCTS PRICES These terms and conditions shall control with respect to any purchase order or sale of Seller s products. No waiver, alteration or modification of these terms and conditions whether on Buyer s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller. Seller will make every effort to complete delivery of products as indicated on Seller s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no back charge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatsoever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay. Seller warrants for one year from the date of shipment Seller s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller s examination shall disclose to its satisfaction that the product is defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective product or workmanship or damage resulting from the same. No adjustment shall be implemented unless product in question is returned to seller in its originally installed condition, still connected to other components of the joint. Buyer must contact Seller as quickly as possible so Seller can assess product in its installed condition. No claims will be honored unless claim is made within forty-five (45) days of the defect being found. Where engineering design or fabrication work is supplied, Buyer s acceptance of Seller s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller s product warranty. THIS IS SELLER S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or product. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller s factory, in any manner; (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives. This warranty is non-transferable. Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under Warranty above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer. Per AWWA/ANSI C110 A21.10, the flanged joint is generally specified for above ground service. Underground use of the flanged joint is generally not desirable due to the rigidity of the joint. Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following: (a) All material returned must, on its arrival at Seller s plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda. All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller s responsibility ceases, and title passes, on delivery to the carrier. Orders covering special or non-standard products are not subject to cancellation except on such terms as Seller may specify on application. Prices and designs are subject to change without notice. All prices are F.O.B. Point of Shipment, unless otherwise stated. FORCE MAJEURE Seller shall not be responsible or liable in any way for any failure to perform due to acts of God, fire, flood, serious accidents, foreign or United States embargo, war or riot, serious shortages, unavailability or significant price increases in commodities, materials or components, labor disputes, interruption of transportation, loss of essential production services, laws, rules, regulations, instructions or acts of any U.S. or foreign governmental authority, or by any other event beyond the reasonable control of Seller or its subcontractors. TAXES The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be added to the purchase price and shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptable to the taxing authorities. Page 2
TABLE OF CONTENTS UTILITY PIPE FITTINGS ACCESSORIES General Terms & Conditions pg. 2 MJ Glands pg. 5-6 Pre-Packaged MJ Accessories pg. 6-10 Page 3
NOTES: REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR PIPE PRODUCTS Page 4
Size (inches) Compliant Weight (lbs.) Crate Qty List Price GLAND PACK - COMPACT MJ GLAND, MJ GASKET & T-HEAD BOLTS & NUTS 3 MJGP03DD MJGP03D 5 360 $21.00 4 MJGP04DD MJGP04D 7 360 $26.00 6 MJGP06DD MJGP06D 10 204 $31.00 8 MJGP08DD MJGP08D 12 175 $36.00 10 MJGP10DD MJGP10D 16 108 $50.00 12 MJGP12DD MJGP12D 17 72 $53.00 14 MJGP14DD MJGP14D 24 60 $87.00 16 MJGP16DD MJGP16D 30 60 $92.00 18 MJGP18DD MJGP18D 45 $122.00 20 MJGP20DD MJGP20D 60 $158.00 24 MJGP24DD MJGP24D 70 $220.00 30 MJGP30DD MJGP30D 123 $524.00 36 MJGP36DD MJGP36D 161 $1,130.00 42 MJGP42DD MJGP42D 296 $1,650.00 48 MJGP48DD MJGP48D 340 $2,025.00 TRANSITION GLAND PACK - COMPACT MJ GLAND, MJ TRANSITION GASKET & T-HEAD BOLTS & NUTS 3 MJGPT03DD MJGPT03D 7 360 $21.00 4 MJGPT04DD MJGPT04D 8 360 $27.00 6 MJGPT06DD MJGPT06D 12 204 $33.00 8 MJGPT08DD MJGPT08D 15 175 $39.00 10 MJGPT10DD MJGPT10D 20 108 $54.00 12 MJGPT12DD MJGPT12D 25 72 $57.00 GLAND PACK WITH STAR BLUE BOLTS - COMPACT MJ GLAND, MJ GASKET WITH FLUOROPOLYMER COATED T-HEAD BOLTS & NUTS 3 MJGPCB03DD MJGPCB03D 5 360 $31.00 4 MJGPCB04DD MJGPCB04D 8 360 $36.00 6 MJGPCB06DD MJGPCB06D 12 204 $46.00 8 MJGPCB08DD MJGPCB08D 15 175 $50.00 10 MJGPCB10DD MJGPCB10D 20 108 $69.00 12 MJGPCB12DD MJGPCB12D 25 72 $72.00 14 MJGPCB14DD MJGPCB14D 35 60 $109.00 16 MJGPCB16DD MJGPCB16D 42 60 $119.00 Page 5
Size (inches) Compliant Weight (lbs.) Crate Qty List Price EPOXY COATED GLAND PACK* - COMPACT MJ GLAND, MJ GASKET & T-HEAD BOLTS & NUTS 3 MJGP03FDD MJGP03FD 5 360 $24.00 4 MJGP04FDD MJGP04FD 7 360 $28.00 6 MJGP06FDD MJGP06FD 10 204 $33.00 8 MJGP08FDD MJGP08FD 12 175 $39.00 10 MJGP10FDD MJGP10FD 16 108 $54.00 12 MJGP12FDD MJGP12FD 17 72 $57.00 14 MJGP14FDD MJGP14FD 24 60 $94.00 16 MJGP16FDD MJGP16FD 30 60 $99.00 18 MJGP18FDD MJGP18FD 45 $134.00 20 MJGP20FDD MJGP20FD 60 $172.00 24 MJGP24FDD MJGP24FD 70 $240.00 30 MJGP30FDD MJGP30FD 123 $574.00 36 MJGP36FDD MJGP36FD 161 $1,271.00 42 MJGP42FDD MJGP42FD 296 $1,840.00 48 MJGP48FDD MJGP48FD 340 $2,264.00 *Gland is FBE with standard accessories VALVE PACK - COMPACT MJ GLAND, MJ GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS 4 MJGPV04DD MJGPV04D 8 360 $31.00 6 MJGPV06DD MJGPV06D 12 204 $37.00 8 MJGPV08DD MJGPV08D 15 175 $41.00 10 MJGPV10DD MJGPV10D 20 108 $61.00 12 MJGPV12DD MJGPV12D 25 72 $65.00 TRANSITION VALVE PACK - COMPACT MJ GLAND, MJ TRANSITION GASKET WITH ANTI-ROTATIONAL BOLTS & NUTS 4 MJGPVT04DD MJGPVT04D 8 360 $32.00 6 MJGPVT06DD MJGPVT06D 12 204 $39.00 8 MJGPVT08DD MJGPVT08D 15 175 $45.00 10 MJGPVT10DD MJGPVT10D 20 108 $66.00 12 MJGPVT12DD MJGPVT12D 25 72 $68.00 DUCTILE IRON MJ GLAND - COMPACT 2 MJG02D 2 800 $11.00 3 MJG03D 3 600 $12.00 4 MJG04D 3 500 $14.00 6 MJG06D 5 360 $15.00 8 MJG08D 6 270 $18.00 10 MJG10D 8 180 $27.00 Page 6
Size (inches) Compliant Weight (lbs.) Crate Qty List Price 12 MJG12D 9 120 $28.00 14 MJG14D 13 64 $50.00 16 MJG16D 17 50 $51.00 18 MJG18D 30 50 $78.00 20 MJG20D 35 25 $91.00 24 MJG24D 50 25 $133.00 30 MJG30D 85 10 $326.00 36 MJG36D 115 10 $938.00 42 MJG42D 143 10 $1,269.00 48 MJG48D 237 10 $1,600.00 DUCTILE IRON MJ GLAND - COMPACT - BARE 2 MJG02UD 2 800 $11.00 3 MJG03UD 3 600 $12.00 4 MJG04UD 3 500 $14.00 6 MJG06UD 5 360 $15.00 8 MJG08UD 6 270 $18.00 10 MJG10UD 8 180 $27.00 12 MJG12UD 9 120 $28.00 14 MJG14UD 13 64 $50.00 16 MJG16UD 17 50 $51.00 18 MJG18UD 30 50 $78.00 20 MJG20UD 35 25 $91.00 24 MJG24UD 50 25 $133.00 30 MJG30UD 85 10 $326.00 36 MJG36UD 115 10 $938.00 42 MJG42UD 143 10 $1,269.00 48 MJG48UD 237 10 $1,600.00 EPOXY COATED DUCTILE IRON MJ GLAND - COMPACT 3 MJG03FD 3 600 $14.00 4 MJG04FD 3 500 $16.00 6 MJG06FD 5 360 $17.00 8 MJG08FD 6 270 $21.00 10 MJG10FD 8 180 $31.00 12 MJG12FD 9 120 $32.00 14 MJG14FD 13 64 $57.00 16 MJG16FD 17 50 $58.00 18 MJG18FD 30 50 $90.00 20 MJG20FD 35 25 $104.00 24 MJG24FD 50 25 $153.00 30 MJG30FD 85 10 $375.00 36 MJG36FD 115 10 $1,079.00 42 MJG42FD 143 10 $1,459.00 48 MJG48FD 237 10 $1,839.00 Page 7
Size (inches) Compliant Weight (lbs.) Crate Qty List Price DUCTILE IRON MJ SWIVEL GLAND - COMPACT 4 MJGS04D 7 100 $54.00 6 MJGS06D 8 100 $57.00 8 MJGS08D 10 100 $91.00 12 MJGS12D 12 50 $133.00 EPOXY COATED DUCTILE IRON MJ SWIVEL GLAND - COMPACT 4 MJGS04FD 7 100 $62.00 6 MJGS06FD 8 100 $66.00 8 MJGS08FD 10 100 $104.00 12 MJGS12FD 12 50 $153.00 ORDERING INFORMATION PIPE QTY C153 T-BOLT C110 T-BOLT STARGRIP REQ. T-BOLT 2 2 5/8 x 3 5/8 x 3 N/A 3 4 5/8 x 3 5/8 x 3 5/8 x 3 4 4 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 6 6 3/4 x 3 1/2 3/4 x 3 1/2 3/4 x 3 1/2 8 6 3/4 x 3 1/2 3/4 x 4 3/4 x 4 10 8 3/4 x 3 1/2 3/4 x 4 3/4 x 4 12 8 3/4 x 3 1/2 3/4 x 4 3/4 x 4 14 10 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2 16 12 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2 18 12 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2 20 14 3/4 x 4 3/4 x 4 1/2 3/4 x 4 1/2 24 16 3/4 x 4 1/2 3/4 x 5 3/4 x 5 30 20 1 x 5 1/2 1 x 6 1 x 6 36 24 1 x 5 1/2 1 x 6 1 x 6 42 28 1 1/4 x 6 1 1/4 x 6 1/2 1 1/4 x 8 1/2 48 32 1 1/4 x 6 1 1/4 x 6 1/2 1 1/4 x 8 1/2 Page 8