March Process Industry Practices Piping. PIP PNDMV09N Needle Valve Data Sheet and Standard Terms

Transcription

1 March 2013 Process Industry Practices Piping Needle Valve Data Sheet and Standard Terms

2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PRINTING HISTORY March 2013 Issued Not printed with State funds

3 March 2013 Process Industry Practices Piping Needle Valve Data Sheet and Standard Terms Table of Contents 1. Introduction Purpose Scope Requirements... 2 Data Form PNDMV09N-D Needle Valve Data Sheet Process Industry Practices Page 1 of 5

4 Needle Valve Data Sheet and Standard Terms March Introduction 1.1 Purpose This Practice provides a data sheet and standard terms used for specifying needle valves. 1.2 Scope This Practice describes, in table format, the standard terms used in the drop down menus of the PIP needle valve data sheet appended to this Practice. 1.3 Additional New Standard Terms This first issue of this Practice contains only those standard terms used in PIP Valve Description Practices. In addition to new standard terms added by PIP as required to support new valve descriptions, future publications of this Practice may also contain additional valve description terms that are in general valve industry usage but not in the PIP Valve Descriptions Practices. Additional standard terms associated with non-pip valve descriptions may be submitted to the PIP office at info@pip.org for consideration for adoption into this Practice. 2. Requirements Table 1 provides standard terms for specifying the characteristics of a needle valve using the -D Data Sheet. The terms are included in drop down menus for each cell in the data sheet. Table 1 Needle Valve Characteristics Standard Terms Characteristic Standard Terms Valve Size Range (Min.) NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3 NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20 NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40 NPS 42 NPS 44 NPS 46 NPS 48 NPS 50 NPS 52 NPS 54 NPS 56 NPS 58 NPS 60 NPS 66 NPS 72 NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144 Valve Size Range (Max.) NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3 NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20 NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40 NPS 42 NPS 44 NPS 46 NPS 48 NPS 50 NPS 52 NPS 54 NPS 56 NPS 58 NPS 60 NPS 66 NPS 72 NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144 Process Industry Practices Page 2 of 5

5 Needle Valve Data Sheet and Standard Terms March 2013 Table 1 Needle Valve Characteristics Standard Terms (continued) Valve Size NPS 1/8 NPS 1/4 NPS 3/8 NPS 1/2 NPS 3/4 NPS 1 NPS 1-1/4 NPS 1-1/2 NPS 2 NPS 2-1/2 NPS 3 Service - Class Service - Fluid End Connection - End Connection - Style End Connection - Ends Standard Pressure Rating - Class Cryogenic Flammable General or utility NPS 3-1/2 NPS 4 NPS 5 NPS 6 NPS 8 NPS 10 NPS 12 NPS 14 NPS 16 NPS 18 NPS 20 Air - instrument Air - plant Ammonia - anhydrous liquid Butane - liquid Carbon Dioxide - dry Carbon Dioxide - wet Crude oil - sour Crude oil - sweet Fuel gas Fuel oil Glycol Hydrochloric acid Lube oil Nitrogen Compression Flanged Bolt holes tapped Bolt holes untapped BW Ferrule tube FF ANSI/AWWA C110/A21.10 ANSI/AWWA C111/A21.11 API 609 ASME B ASME B16.1 ASME B16.1 Class 125 ASME B16.11 ASME 75 ASME 125 ASME 150 ASME 200 ASME 250 ASME 300 ASME 400 ASME 600 NPS 22 NPS 24 NPS 26 NPS 28 NPS 30 NPS 32 NPS 34 NPS 36 NPS 38 NPS 40 High pressure High temperature Lethal Lugged Threaded MJ Oversized reducing flange Push On RF NPS 42 NPS 44 NPS 46 NPS 48 NPS 50 NPS 52 NPS 54 NPS 56 NPS 58 NPS 60 NPS 66 NPS 72 NPS 78 NPS 84 NPS 90 NPS 96 NPS 102 NPS 108 NPS 120 NPS 144 Low temperature Toxic Nitric acid LNG Oxygen Propane Sewer sanitary - forced/gravity Steam, condensate Sulphur - liquid Water - boiler feed Water - fresh, cooling tower Water - demineralized Water - fire - AG Water - fire - BG Water - potable Water - sea Wafer Welded RF, Molded Roll Grooved SW Tubing ASME B16.25 ASME B16.47 ASME B16.47 Series B ASME B16.5 ASME B16.5 Class 125 ASME B16.5 Class 150 ASME 800 ASME 900 ASME 1500 ASME 2000 ASME 2500 ASME 4500 ASME 6000 Process Industry Practices Page 3 of 5

6 Needle Valve Data Sheet and Standard Terms March 2013 Table 1 Needle Valve Characteristics Standard Terms (continued) Material - Body - Material Alloy 400 SS Material - Body - ASTM Number A182-F316 A351-CF8M Material - Body - Manufacturing Process Annealed Cast Die formed Forged Heat treated Precipitation hardened Other Material - Bonnet - Material Alloy 400 SS Material - Bonnet - ASTM Number A182-F316 A351-CF8M Trim Material - General Material Alloy 400 Alloy 405 Trim Material - General ASTM Number A182-F316 A351-CF8M & Design - Body - T-body & Design - Needle Ball Tip Stem & Design - Bonnet Bolted Bonnetless Extension bonnet Integral Pressure seal Seal welded Threaded Threaded-in Threaded-over Union Welded Other & Design - (Needle) Design Operation - Manual Operator Gear Handle Handle - T-bar Handwheel Handwheel - oval Lever Lever - bellcrank Lever - hi-hub with lockout Post indicator Process Industry Practices Page 4 of 5

7 Needle Valve Data Sheet and Standard Terms March 2013 Table 1 Needle Valve Characteristics Standard Terms (continued) Operation - Provided Actuator Packing Material Packing Specs Packing Mfr Proc Stem Seal Matl Stem Seal Standards - Design Standards - Dimensions Standards - Rating Standards - Testing Electric - motor Hydraulic Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM Anti-extrusion rings Corrosion inhibited Annealed Cast Die formed Asbestos-free Graphite Flexible Graphite Alloy C Buna-N EPDM Bellows seal Braided rings Diaphragm API 598 API 600 FKM - Kalrez Viton, PTFE Coating FKM PFA PFA - virgin Lantern ring Packing box purged Forged Heat treated FKM - Kalrez Viton, PTFE Coating FKM PFA PFA - virgin Laminated Solid Hydraulic - pneumatic Pneumatic MSS SP-105 MSS SP-105 API 603 API 608 RTFE PTFE PTFE, Filled TFE P energized seal Precipitation hardened Other RTFE PTFE PTFE, Filled TFE V-ring - standard V-ring - twin V-ring - vacuum Process Industry Practices Page 5 of 5

8 Needle Valve Data Sheet PNDMV09N-D Catalog Name Current valve of Valve Code Number Revision Owner/Role/URL Purchaser PIP Catalog Valve Number PIP Revision Valve Size Range (Min/Max) Valve Size Recommended Manufacturer/Supplier Valve Details Valve Size / Range Company Name URL Model Number Drawing Number Size Min Max Approved Date Purchaser Line Classes Sub-catalog Class Sub-catalog Class Sub-catalog Class Sub-catalog Class Purchaser Alternative Valve Codes Sub-catalog Code Sub-catalog Code Sub-catalog Code Sub-catalog Code Service Class/Fluid Service Temp (Min/Max) User service names F Detailed desc. Pressure (Min/Max) psi PIP Line Class End Connection Style Ends Standard Pressure Rating Pressure psi g Class Material Trim Material Material ASTM Number Material Body General Manufacturing Process Needle Seat Material ASTM Number Seat insert Bonnet ASTM Number and Design Body with Panel Nut Body Bonnet Needle Trim Design Operation Manual Operator Provided Actuator Stem Packing and Stem Seals Mfg Std Material Specifications Packing Manufacturing Process V-rings Low Emission Mfg Std Material Stem Seal Standards Design Dimension (face to face) Rating Testing Additional Information Face to Face Dimension in Valve Orientation Inclination Angle deg Centerline to Operator Top ft Dry Weight lb (from horizontal) Notes