Siemens AG SB3 Pushbuttons and Indicator Lights, 22 mm. Application. 7 ASIsafe EMERGENCY-STOP mushroom pushbuttons (see page 9/64)

Transcription

1 General data Design The 3SB3 series is a modular range of commanding and signaling devices for front panel mounting and rear conductor connection. As an alternative, individual elements can also be supplied for use on printed circuit boards. Complete units are offered for the most commonly used applications. Standards IEC , EN , IEC , EN IEC , EN for EMERGENCY-STOP mushroom pushbuttons. Connection methods The devices are available with screw terminals (box terminals), spring-type terminals or solder pins. Screw terminals Spring-type terminals Solder pin connections The terminals are indicated in the selection and ordering data by orange bacrounds. Application Actuators and indicators and complete units The 3SB3 series is available: 7 Made of molded plastic in flat, round and square design 7 Made of metal in round design. The devices are of modern industrial design and can be mounted rapidly by a single person. The operating surfaces of the pushbuttons and illuminated pushbuttons are concave. The lenses of the indicator lights are convex. The metal version with a high degree of protection according to IP67 and NEMA 4 is available for the world market. One command point comprises: 7 An actuator or lens assembly in front of the control panel 7 A holder for mounting behind the control panel 7 Up to 3 contact blocks and/or 1 lampholder behind the control panel 7 A comprehensive range of accessories for inscription Two contact blocks can be snapped onto the actuator in the standard version. When three contact blocks or illuminated actuators are required, an additional holder must be plugged onto the actuator from the rear. 7 3SB3 01-0AB holder for 3 contact blocks or for 2 contact blocks and 1 lampholder 7 3SB3 01-0AC holder with pressure plates for actuating a central contact block when using a selector switch, key-operated switch and twin pushbutton with 3 contact blocks. For illuminated pushbuttons, illuminated switches and illuminated selector switches the holder is included in the scope of supply as standard. The contact blocks are fitted with a slow-action contact (1 NO contact or 1 NC contact) with double operating contacts. These ensure a high switching reliability even with small voltages and currents, such as 5 V/1 ma. They are suitable for use in solidstate systems as well as conventional controls. The devices are climate-proof (KTW 24) and suitable for standard industrial applications and operation in marine applications. For operation in oily atmospheres (organic oils/lubricants) we recommend actuators of polyamide type (-0PA0 versions). AS-Interface solutions The 3SB3 commanding and signaling devices can be connected to the AS-Interface communication system quickly and safely with the help of various solutions. The following solutions are available: 7 ASIsafe EMERGENCY-STOP mushroom pushbuttons (see page /64) 7 AS-Interface enclosures with 1 to 6 command points (see page /3). 7 AS-Interface front panel modules for 4 command points (see Catalog IK PI) "Intrinsic safety" type of protection EEx i according to ATEX directive 4//EC The pushbuttons and indicator lights in round design can also be used in hazardous areas. The 3SB contact blocks and the 3SB34..-1A lampholders (with 3SB A LED lamp) with screw terminals or spring-type terminals can be used. See Chapter 20 "Appendix" "Standards and approvals" "Type overview of approved devices for potentially explosive areas (ATEX explosion protection)". Safety EMERGENCY-STOP pushbuttons acc. to ISO For controls according to IEC or EN (VDE 0113 Part, the mushroom pushbuttons of the 3SB3 series are suitable for use as safety EMERGENCY-STOP pushbuttons. Safety circuits IEC and EN require positive opening, i. e. for the purposes of personal safety, the assured opening of NC contacts is expressly stipulated for the electrical equipment of machines in all safety circuits and marked according to IEC with the symbol. Category 4 according to EN 54-1 can be attained with the EMERGENCY-STOP mushroom pushbuttons if the corresponding failsafe evaluation units are selected and correctly installed, e. g. the 3TK28 safety relays or matching units from the ASIsafe, SIMATIC or SINUMERIK product ranges. /20 Siemens LV

2 Actuators and Indicators, Plastic, Round, 22 mm Complete units Selection and ordering data The following applies to all complete units: (UNIT) = 1 PS* = 1 UNIT PG = 102 Pushbutton Pushbutton with flat button Illuminated pushbutton with flat button Rated voltage of lamp Color of handle Inscription is possible by inserting a label. Contacts for front plate mounting DT Screw terminals Weight DT Spring-type terminals Weight V Pushbuttons with flat button -- Black 1 NO } 3SB AA B 3SB AA11-0CC Black 1 NC B 3SB AA B 3SB AA11-0CC Red 1 NC } 3SB AA B 3SB AA21-0CC Yellow 1 NO B 3SB AA B 3SB AA31-0CC Green 1 NO } 3SB AA B 3SB AA41-0CC Blue 1 NO B 3SB AA B 3SB AA51-0CC White 1 NO } 3SB AA B 3SB AA61-0CC Black 1 NO + 1 NC B 3SB AA B 3SB AA11-0CC Red 1 NO + 1 NC B 3SB AA B 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA B 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA B 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA B 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA B 3SB AA61-0CC Illuminated pushbuttons with flat button With integrated LED (including holder for 3 24 AC/DC 24 AC/DC Siemens AG 2010 Red 1 NC } 3SB AA B 3SB AA21-0CC Yellow 1 NO B 3SB AA B 3SB AA31-0CC Green 1 NO } 3SB AA B 3SB AA41-0CC Blue 1 NO B 3SB AA B 3SB AA51-0CC White 1 NO B 3SB AA B 3SB AA61-0CC Clear 1 NO } 3SB AA B 3SB AA71-0CC Red 1 NO + 1 NC B 3SB AA B 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA B 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA B 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA B 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA B 3SB AA61-0CC Clear 1 NO + 1 NC B 3SB AA B 3SB AA71-0CC AC Red 1 NC B 3SB AA Yellow 1 NO B 3SB AA Green 1 NO B 3SB AA Blue 1 NO B 3SB AA White 1 NO B 3SB AA Clear 1 NO B 3SB AA AC Red 1 NO + 1 NC B 3SB AA Yellow 1 NO + 1 NC B 3SB AA Green 1 NO + 1 NC B 3SB AA Blue 1 NO + 1 NC C 3SB AA White 1 NO + 1 NC B 3SB AA Clear 1 NO + 1 NC B 3SB AA AC Red 1 NC } 3SB AA B 3SB AA21-0CC Yellow 1 NO B 3SB AA B 3SB AA31-0CC Green 1 NO } 3SB AA B 3SB AA41-0CC Blue 1 NO B 3SB AA B 3SB AA51-0CC White 1 NO B 3SB AA B 3SB AA61-0CC Clear 1 NO } 3SB AA B 3SB AA71-0CC AC Red 1 NO + 1 NC B 3SB AA B 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA B 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA B 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA B 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA B 3SB AA61-0CC Clear 1 NO + 1 NC B 3SB AA B 3SB AA71-0CC /22 Siemens LV

3 Actuators and Indicators, Plastic, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Pushbutton Illuminated pushbutton with flat button Mushroom pushbuttons Color of handle Contacts for front plate mounting Illuminated pushbuttons with flat button With BA s lampholder, without lamp (including holder for 3 DT Screw terminals Weight DT Spring-type terminals Weight Red 1 NC B 3SB AA B 3SB AA21-0CC Yellow 1 NO B 3SB AA B 3SB AA31-0CC Green 1 NO B 3SB AA B 3SB AA41-0CC Blue 1 NO B 3SB AA B 3SB AA51-0CC White 1 NO B 3SB AA B 3SB AA61-0CC Clear 1 NO B 3SB AA B 3SB AA71-0CC Red 1 NO + 1 NC B 3SB AA B 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA B 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA B 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA B 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA B 3SB AA61-0CC Clear 1 NO + 1 NC B 3SB AA B 3SB AA71-0CC Mushroom push-pull buttons, Ø 40 mm, latching, with pull-to-unlatch mechanism Red 1 NC } 3SB CA B 3SB CA21-0CC NO + 1 NC B 3SB CA B 3SB CA21-0CC Mushroom push-pull button Inscription is possible by inserting a label. Siemens LV /23

4 Actuators and Indicators, Plastic, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Siemens AG 2010 Color of Contacts for handle/ front plate Lock No. mounting DT Screw terminals Weight DT Spring-type terminals Weight Selector switches Selector switches, 2 switch positions O-I, 50 operating angle Black 1 NO } 3SB KA B 3SB KA11-0CC NO + 1 NC B 3SB KA B 3SB KA11-0CC Selector switches Selector switches, 2 switch positions O-I, 0 operating angle Black 1 NO B 3SB HA NO + 1 NC B 3SB HA Selector switches, 3 switch positions switching sequence I-O-II, 2 x 50 operating angle Black 1 NO, 1 NO } 3SB DA B 3SB DA11-0CC NO + 1 NC, 1 NO + 1 NC B 3SB DA B 3SB DA11-0CC Latching Latching Latching Momentary contact type Black 1 NO, 1 NO B 3SB EA B 3SB EA11-0CC NO + 1 NC, 1 NO + 1 NC B 3SB EA C 3SB EA11-0CC Key-operated switches RONIS key-operated switches, 2 switch positions With 2 keys, removal position O + I, switching sequence O-I, 50 operating angle Latching SB 30 1 NO } 3SB AD B 3SB AD11-0CC NO + 1 NC B 3SB AD B 3SB AD11-0CC RONIS key-operated switch Twin pushbuttons Twin pushbuttons, with flat, square buttons With I/O inscription White/ White 1 NO + 1 NC, 1 NO + 1 NC D 3SB AC Twin pushbuttons with flat buttons Accessories for twin pushbuttons, see page /38. /24 Siemens LV

5 BG-PRÜFZERT Siemens AG 2010 Actuators and Indicators, Plastic, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Color of handle Contacts for front plate mounting EMERGENCY-STOP devices acc. to ISO 13850, with yellow name plate, Ø 80 mm, with inscription With rotate-to-unlatch mechanism With rotate-to-unlatch mechanism and switch position indication With pull-to-unlatch mechanism EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with positive latching function, with rotate-to-unlatch mechanism English inscription "EMERGENCY STOP" Red Red 1 NC 1 NO + 1 NC French inscription "ARRET D URGENCE" Red 1 NC Positive opening according to IEC , Appendix K. Can be used with 3TK28 safety relays. Certificate: DT Screw terminals Weight B 3SB HR B 3SB HR B 3SB HP Red 1 NO + 1 NC B 3SB HP German inscription "NOT-HALT" DT Spring-type terminals Weight Red 1 NC } 3SB HA B 3SB HA20-0CC Red 1 NO + 1 NC B 3SB HA B 3SB HA20-0CC With rotate-to-unlatch mechanism and mechanical switch position indication English inscription "EMERGENCY STOP" Red Red 1 NC 1 NO + 1 NC German inscription "NOT-HALT" Red Red 1 NC 1 NO + 1 NC With pull-to-unlatch mechanism English inscription "EMERGENCY STOP" Red Red 1 NC 1 NO + 1 NC German inscription "NOT-HALT" Red 1 NC B 3SB HR B 3SB HR B 3SB HA B 3SB HA26-0CC B 3SB HA B 3SB HA26-0CC B 3SB TR B 3SB TR B 3SB TA Red 1 NO + 1 NC B 3SB TA Siemens LV /25

6 Actuators and Indicators, Plastic, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Siemens AG 2010 Indicator lights Indicator light with smooth lens Indicator lights with lens with concentric rings Rated voltage of lamp Inscription by inserting a label is not possible. Color of lens DT Screw terminals Weight DT Spring-type terminals Weight V Indicator lights, with smooth lens With integrated LED 24 AC/DC Red } 3SB AA B 3SB AA20-0CC Yellow B 3SB AA B 3SB AA30-0CC Green } 3SB AA B 3SB AA40-0CC Blue B 3SB AA B 3SB AA50-0CC White B 3SB AA B 3SB AA60-0CC Clear } 3SB AA B 3SB AA70-0CC AC Red B 3SB AA Yellow B 3SB AA Green B 3SB AA Blue B 3SB AA White B 3SB AA Clear B 3SB AA AC Red } 3SB AA B 3SB AA20-0CC Yellow B 3SB AA B 3SB AA30-0CC Green } 3SB AA B 3SB AA40-0CC Blue B 3SB AA B 3SB AA50-0CC White B 3SB AA B 3SB AA60-0CC Clear } 3SB AA B 3SB AA70-0CC With BA s lampholder, without lamp -- Red B 3SB AA B 3SB AA20-0CC Yellow B 3SB AA B 3SB AA30-0CC Green B 3SB AA B 3SB AA40-0CC Blue B 3SB AA B 3SB AA50-0CC White B 3SB AA B 3SB AA60-0CC Clear B 3SB AA B 3SB AA70-0CC Indicator lights with lens with concentric rings With integrated LED 24 AC/DC Red } 3SB BA B 3SB BA20-0CC Yellow B 3SB BA B 3SB BA30-0CC Green } 3SB BA B 3SB BA40-0CC Blue B 3SB BA B 3SB BA50-0CC White B 3SB BA B 3SB BA60-0CC Clear } 3SB BA B 3SB BA70-0CC AC Red B 3SB BA Yellow B 3SB BA Green B 3SB BA Blue B 3SB BA White B 3SB BA Clear B 3SB BA AC Red } 3SB BA B 3SB BA20-0CC Yellow B 3SB BA B 3SB BA30-0CC Green } 3SB BA B 3SB BA40-0CC Blue B 3SB BA B 3SB BA50-0CC White B 3SB BA B 3SB BA60-0CC Clear } 3SB BA B 3SB BA70-0CC With BA s lampholder, without lamp -- Amber B 3SB BA Red B 3SB BA B 3SB BA20-0CC Yellow B 3SB BA B 3SB BA30-0CC Green B 3SB BA B 3SB BA40-0CC Blue B 3SB BA B 3SB BA50-0CC White B 3SB BA B 3SB BA60-0CC Clear B 3SB BA B 3SB BA70-0CC With BA s lampholder, with LED 130 AC Amber B 3SB BA Red B 3SB BA Yellow B 3SB BA Green B 3SB BA Blue B 3SB BA White B 3SB BA Clear B 3SB BA /26 Siemens LV

7 Actuators and Indicators, Plastic, Round, 22 mm Complete units Signaling devices Rated voltage of lamp Acoustic signaling devices, IP65 Continuous tone 2.4 khz, operational current min. 4 ma, sound pressure min. 80 db/10 cm V Color of lens DT Screw terminals 24 AC/DC Black A 3SB BA unit AC/DC B 3SB BA unit AC/DC A 3SB BA unit Acoustic signaling device Mounting in 3SB38 enclosure only with 3SB A lampholder; not possible with 3SB A lampholder for floor mounting. Special devices Degree of protection Actuators for potentiometers 2)3) With shaft Ø 6 mm, mm long Color of handle DT Without connection IP65 B 3SB CH unit Potentiometer drive Pushbuttons with extended stroke 2) for actuating relays 12 mm stroke IP65 Black B 3SB EA unit Pushbuttons with 12 mm stroke 2) Mounting in 3SB38 enclosure is not possible. 3) The potentiometer is not included in the scope of supply. Siemens LV /27

8 Actuators and Indicators, Plastic, Round, 22 mm Coordinate switches, complete Overview Operation The 3SB J contact block is used, which due to its depth cannot be built into 3SB38 enclosures. Switches are available as follows: With 2 or 4 switch positions Latching or momentary contact type With or without mechanical interlocking In the case of switches with mechanical interlock in O position, the switch is unlatched with the unlatching button at the front of the actuating lever. Inscriptions A name plate consisting of a black, plastic label holder and two or four adhesive, silver-colored inscription labels of 27 mm x 27 mm in size is available for labeling purposes. These labels can be supplied with and without customized inscription. Joystick switches control auxiliary circuits permitting movements in various directions of machines and equipment. The switches are designed for front panel mounting. They are climate-proof. Note mounting dimensions! Selection and ordering data Coordinate switches Coordinate switch, 2 switch positions Operating travel Contact closed Contact open 2 switch positions, 1 NO per direction Horizontal, momentary contact type Without mechanical locking in the O position DT Screw terminals With plastic front ring, black B 3SB DV unit With metal front ring B 3SB DV unit With mechanical locking in the O position With plastic front ring, black B 3SB DW unit With metal front ring B 3SB DW unit Vertical, momentary contact type Without mechanical locking in the O position With plastic front ring, black B 3SB FV unit With metal front ring B 3SB FV unit With mechanical locking in the O position With plastic front ring, black B 3SB FW unit With metal front ring B 3SB FW unit /28 Siemens LV

9 Actuators and Indicators, Plastic, Round, 22 mm Coordinate switches, complete Coordinate switches Coordinate switch, 2 switch positions Operating travel Contact closed Contact open 2 switch positions, 1 NO per direction Horizontal, latching Without mechanical locking in the O position DT Screw terminals With plastic front ring, black B 3SB EV unit With metal front ring B 3SB EV unit With mechanical locking in the O position With plastic front ring, black B 3SB EW unit With metal front ring B 3SB EW unit Vertical, latching Without mechanical locking in the O position With plastic front ring, black B 3SB GV unit With metal front ring B 3SB GV unit With mechanical locking in the O position With plastic front ring, black B 3SB GW unit With metal front ring B 3SB GW unit switch positions, 1 NO per direction Momentary contact type Coordinate switch, 4 switch positions Without mechanical locking in the O position With plastic front ring, black B 3SB JV unit With metal front ring B 3SB JV unit With mechanical locking in the O position With plastic front ring, black B 3SB JW unit With metal front ring B 3SB JW unit Latching Without mechanical locking in the O position With plastic front ring, black B 3SB KV unit With metal front ring B 3SB KV unit With mechanical locking in the O position With plastic front ring, black B 3SB KW unit With metal front ring B 3SB KW unit Siemens LV /2

10 Actuators and Indicators, Plastic, Round, 22 mm Coordinate switches, complete Accessories Siemens AG 2010 Spare contact blocks 3SB J Contact blocks Contact blocks with 2 contacts 1 NO, 1 NO (in scope of supply of switch) Symbols/ operating travel Contact closed Contact open DT Screw terminals C 3SB J 1 1 unit Name plates 3SB1 06-0AV DT Label holders for joystick switches 2 switch positions, horizontal, 8 mm 30 mm 2 switch positions, vertical, 30 mm 8 mm B 3SB1 06-0AU 1 1 unit B 3SB1 06-0AV 1 1 unit switch positions B 3SB1 06-0AW 1 1 unit Inscription labels 27 mm 27 mm, silver-colored, for sticking in place Without inscription B 3SB1 06-2AA units With inscription (engraved) Text lines (up to 5 lines each with 11 characters) D Graphic symbol with number acc. to ISO 7000 or IEC SB1 06-2XZ K0Y, K1Y, K2Y, or K5Y 1 1 unit D K3Y 1 1 unit Any inscription or symbol D KY 1 1 unit SB1 06-0AW For black plastic labels, see page /72. Options Customized inscriptions These labeling plates can be inscribed with text or symbols. 5 lines with 11 characters each in a letter height of 4 mm are possible. Ordering notes Append the following codes to the : Text line(s) in upper/lower case, upper case always for beginning of line (e. g. "Lift out"): K0Y Text line(s) in upper case (e. g. "LIFT OUT"): K1Y Text line(s) in lower case (e. g. "lift out"): K2Y Text line(s) in upper/lower case, all words begin with upper case letters (e. g. "Lift Out"): K5Y Symbol with number according to ISO 7000 or IEC 60417: K3Y Any inscription or symbol according to order form supplement: KY When ordering, specify the required inscription in plain text in addition to the order number and order code. In the case of special inscriptions with words in languages other than German, give the exact spelling and specify the language. In the case of multi-line inscriptions, the text must be assigned to the respective line, e. g. "Z1 = Lift, Z2 =Lower". Symbols can also be ordered with numbers according to ISO 7000 or IEC For special symbols (order code KY), a CAD drawing in DXF format can be submitted. Ordering example A label inscribed with symbol No according to ISO 7000 is required: 3SB1 06-2XZ K3Y Z = 1117 ISO For other ordering examples see page /74. /30 Siemens LV

11 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Selection and ordering data Pushbuttons with holder With flat button With raised button With raised button, latching With raised front ring With raised front ring, castellated Illuminated pushbutton with raised button Pushbuttons with flat button Pushbuttons with raised button Pushbuttons with raised button, latching by pressing in and turning to the right, unlatches by turning to the left Pushbuttons with raised front ring (height 13 mm) Pushbuttons with raised front ring, castellated (height 13 mm) Illuminated pushbuttons with flat button (including holder for 3 Illuminated pushbuttons with raised button (including holder for 3 Pushbuttons with flat button, latching, unlatches by pressing again Illuminated pushbuttons with flat button, latching, unlatches by pressing again, (including holder for 3 Inscriptions Color of handle DT Black } 3SB AA unit Red } 3SB AA unit Yellow B 3SB AA unit Green } 3SB AA unit Blue B 3SB AA unit White } 3SB AA unit Gray B 3SB AB unit Clear 2) B 3SB AA unit I Green B 3SB AA unit O Red B 3SB AB unit I White B 3SB AB unit O Black B 3SB AB unit R Blue B 3SB AC unit Black B 3SB BA unit Red B 3SB BA unit Yellow B 3SB BA unit Green B 3SB BA unit Blue B 3SB BA unit White B 3SB BA unit Black } 3SB CA unit Red B 3SB CA unit Black B 3SB AA unit Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Black B 3SB AA unit Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Amber 2) C 3SB AA unit Red 2) } 3SB AA unit Yellow 2) } 3SB AA unit Green 2) } 3SB AA unit Blue 2) B 3SB AA unit White B 3SB AA unit Clear 2) } 3SB AA unit Red B 3SB BA unit Yellow B 3SB BA unit Green B 3SB BA unit Blue B 3SB BA unit Clear B 3SB BA unit Black B 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue B 3SB DA unit White B 3SB DA unit Gray C 3SB DB unit Red 2) B 3SB DA unit Yellow 2) B 3SB DA unit Green 2) B 3SB DA unit Blue 2) B 3SB DA unit White B 3SB DA unit Clear 2) B 3SB DA unit Also available without holder. Supplement with "-Z" and quote order code "B01". 2) Inscription is possible by inserting a label. Siemens LV /31

12 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Siemens AG 2010 Mushroom pushbuttons with holder 2) Color of handle DT Mushroom pushbuttons, Ø 30 mm Black B 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Mushroom pushbuttons, Ø 40 mm Black } 3SB GA unit Red } 3SB GA unit Yellow B 3SB GA unit Green B 3SB GA unit Mushroom pushbuttons, Ø 60 mm Black B 3SB QA unit Red B 3SB QA unit Yellow B 3SB QA unit Green B 3SB QA unit Illuminated mushroom pushbuttons, Ø 30 mm (including holder for 3 Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue B 3SB DA unit White B 3SB DA unit Clear B 3SB DA unit Illuminated mushroom pushbuttons, Ø 40 mm (including holder for 3 Yellow B 3SB GA unit Green B 3SB GA unit White B 3SB GA unit Push-pull buttons, Ø 30 mm, latching, pull to unlatch Push-pull buttons, Ø 40 mm, latching, pull to unlatch Push-pull buttons, Ø 60 mm, latching, pull to unlatch Black B 3SB EA unit Red B 3SB EA unit Black } 3SB CA unit Red } 3SB CA unit Black B 3SB RA unit Red B 3SB RA unit Push-pull buttons, Ø 30 mm, can be illuminated, latching, pull to unlatch, (including holder for 3 Push-pull buttons, Ø 40 mm, can be illuminated, latching, pull to unlatch, (including holder for 3 Red B 3SB EA unit Yellow B 3SB EA unit Green B 3SB EA unit Blue B 3SB EA unit Clear B 3SB EA unit Red B 3SB CA unit Yellow B 3SB CA unit Green B 3SB CA unit Blue B 3SB CA unit Clear B 3SB CA unit Also available without holder. Supplement with "-Z" and quote order code "B01". /32 Siemens LV ) Maximum permissible equipment: 3 single-pole or 2 double-pole contact blocks. When using the 3SB3 01-0AB holder, the central command point must not be empty.

13 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Selector switches with holder Illumination Color of handle Selector switches with 2 switch positions O-I, 0 operating angle, latching DT Black B 3SB HA unit Red B 3SB HA unit Green B 3SB HA unit White B 3SB HA unit Non-illuminated Illuminated Non-illuminated Illuminated O-I, 50 operating angle, latching O-I, 50 operating angle, momentary contact type Illuminated (including holder for 3 Illuminated (including holder for 3 I-O-II, 2 x 50 operating angle, momentary contact type I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right Illuminated (including holder for 3 Illuminated (including holder for 3 Non-illuminated Non-illuminated Non-illuminated Selector switches with 3 switch positions Non-illuminated I-O-II, 2 x 50 operating angle, latching Non-illuminated Non-illuminated Illuminated (including holder for 3 Black } 3SB KA unit Red B 3SB KA unit Green B 3SB KA unit White B 3SB KA unit Red B 3SB KA unit Yellow B 3SB KA unit Green B 3SB KA unit Blue B 3SB KA unit Clear B 3SB KA unit Black } 3SB LA unit Red B 3SB LA unit Green B 3SB LA unit White B 3SB LA unit Red B 3SB LA unit Yellow B 3SB LA unit Green B 3SB LA unit Blue B 3SB LA unit Clear B 3SB LA unit Black } 3SB DA unit Red B 3SB DA unit Green B 3SB DA unit White B 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue B 3SB DA unit Clear B 3SB DA unit Black } 3SB EA unit Red B 3SB EA unit Green B 3SB EA unit White B 3SB EA unit Red B 3SB EA unit Yellow B 3SB EA unit Green B 3SB EA unit Blue B 3SB EA unit Clear B 3SB EA unit Black } 3SB GA unit Red B 3SB GA unit Green B 3SB GA unit White B 3SB GA unit Red B 3SB GA unit Yellow B 3SB GA unit Green B 3SB GA unit Blue B 3SB GA unit Clear B 3SB GA unit I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right Non-illuminated Illuminated (including holder for 3 Black B 3SB FA unit Red B 3SB FA unit Green B 3SB FA unit White B 3SB FA unit Red B 3SB FA unit Yellow B 3SB FA unit Green B 3SB FA unit Blue C 3SB FA unit Clear B 3SB FA unit Also available without holder. Supplement with "-Z" and quote order code "B01". Siemens LV /33

14 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Siemens AG 2010 Key-operated switches with holder Lock version DT Type Lock Key No./ removal color position Key-operated switches with 2 keys and 2 switch positions O-I, 50 operating angle, latching RONIS SB 30 O+I B 3SB HD unit O B 3SB HD unit I B 3SB HD unit RONIS key-operated switch CES key-operated switch BKS key-operated switch O.M.R. key-operated switch O-I, 50 operating angle, latching O-I, 50 operating angle, momentary contact type For BKS and CES special locks, see page /65. Also available without holder. Supplement with "-Z" and quote order code "B01". 2) For locks with key monitoring the supplied 3SB3 01-0AB holder must be used. The key scan is performed by a 3SB34 single-pole NC contact block which must be snap-mounted in the center position. Scanning of the switch positions must be performed by additional contact blocks which are snapmounted on the actuator. 3) Keys are not included in scope of supply. 4) According to FIAT standards; also available for other users. RONIS SB 30 O+I } 3SB AD unit O } 3SB AD unit I B 3SB AD unit CES SSG 10 O+I } 3SB LD unit O } 3SB LD unit I B 3SB LD unit LSG 1 O+I B 3SB LF unit O B 3SB LF unit CES with SSG 10 O C 3SB LD unit key monitoring 2) BKS S1 O+I B 3SB AD unit O B 3SB AD unit I B 3SB AD unit O.M.R. 4) Light blue E1 for O+I B 3SB AE unit VW 3) O B 3SB AE unit E2 for O+I B 3SB AE unit VW 3) O B 3SB AE unit E7 for O+I B 3SB AE unit VW 3) O B 3SB AE unit E for O+I B 3SB AE unit VW 3) O B 3SB AE unit Red Black Yellow O+I B 3SB AG unit O B 3SB AG unit O+I B 3SB AH unit O B 3SB AH unit O+I B 3SB AJ unit O B 3SB AJ unit O+I B 3SB AK unit O B 3SB AK unit RONIS SB 30 O } 3SB BD unit CES SSG 10 O } 3SB MD unit LSG 1 O B 3SB MF unit BKS S1 O B 3SB BD unit O.M.R. 4) Light blue Red Black Yellow O B 3SB BG unit O B 3SB BH unit O B 3SB BJ unit O B 3SB BK unit /34 Siemens LV

15 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Key-operated switches with holder RONIS key-operated switch CES key-operated switch BKS key-operated switch Lock version DT Type Lock Key No./ removal color position Key-operated switches with 2 keys and 3 switch positions I-O-II, 2 x 50 operating angle, latching I-O-II, 2 x 50 operating angle, momentary contact type RONIS SB 30 I+O+II B 3SB DD unit O B 3SB DD unit I+II B 3SB DD unit I B 3SB DD unit II B 3SB DD unit O+I B 3SB DD unit CES SSG 10 I+O+II B 3SB PD unit O B 3SB PD unit O+I B 3SB PD unit I+II B 3SB PD unit I B 3SB PD unit II B 3SB PD unit CES with SSG 10 O C 3SB PD unit key monitoring 2) BKS S1 I+O+II B 3SB DD unit II C 3SB DD unit O.M.R. 3) Light blue Red Black Yellow I+O+II B 3SB DG unit O B 3SB DG unit O B 3SB DH unit O+I B 3SB DH unit I+O+II B 3SB DJ unit O B 3SB DJ unit I+O+II B 3SB DK unit RONIS SB 30 O B 3SB ED unit CES SSG 10 O B 3SB QD unit BKS S1 O B 3SB ED unit O.M.R. 3) Black O B 3SB EJ unit O.M.R. key-operated switch I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right RONIS SB 30 O + II B 3SB GD unit O B 3SB GD unit II B 3SB GD unit CES SSG 10 O + II B 3SB SD unit O B 3SB SD unit BKS S1 O B 3SB GD unit I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right For BKS and CES special locks, see page /65. Also available without holder. Supplement with "-Z" and quote order code "B01". 2) For locks with key monitoring the supplied 3SB3 01-0AB holder must be used. The key scan is performed by a 3SB34 single-pole NC contact block which must be snap-mounted in the center position. Scanning of the switch positions must be performed by additional contact blocks which are snapmounted on the actuator. 3) According to FIAT standards; also available for other users. RONIS SB 30 O+I B 3SB FD unit O B 3SB FD unit I B 3SB FD unit CES SSG 10 O+I B 3SB RD unit O B 3SB RD unit I B 3SB RD unit BKS S1 O+I B 3SB FD unit O B 3SB FD unit I B 3SB FD unit O.M.R. 3) Light blue Black O B 3SB FG unit I B 3SB FJ unit Siemens LV /35

16 BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Siemens AG 2010 Color of handle EMERGENCY-STOP devices according to ISO and IEC , with holder 2). Can also be used with 3TK28 safety relays. EMERGENCY-STOP mushroom pushbuttons, Ø 32 mm, with positive latching acc. to ISO 13850, with rotate-to-unlatch mechanism Approval DT Red B 3SB FA unit Mushroom diameter 32 mm EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, Red with positive latching acc. to ISO 13850, with rotate-to-unlatch mechanism Mushroom diam. 40 mm, with rotate-to-unlatch mechanism with switch position indication Standard version } 3SB HA unit With mechanical switch position indication EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with positive latching acc. to ISO 13850, with pull-to-unlatch mechanism A 3SB HA unit Red B 3SB TA unit Mushroom diameter 40 mm, pull-to-unlatch mechanism EMERGENCY-STOP mushroom pushbuttons, Ø 60 mm, with positive latching acc. to ISO 13850, with rotate-to-unlatch mechanism Red B 3SB AA unit Mushroom diameter 60 mm Mushroom diameter 40 mm, with RONIS key-operated switch EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with RONIS key-operated switches, lock No. SB 30, with positive latching acc. to ISO 13850, unlocking only possible using key EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with CES lock, lock No. SSG 10, with positive latching acc. to ISO 13850, unlocking only possible using key EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with BKS lock, lock No. S1, with positive latching acc. to ISO 13850, unlocking only possible using key For BKS and CES special locks, see page /65. Red B 3SB BA unit Red B 3SB KA unit Red B 3SB LA unit EMERGENCY-STOP mushroom Red B 3SB MA unit pushbuttons, Ø 40 mm, with O.M.R. key-operated Mushroom diameter 40 mm, switch, lock No , with CES key-operated switch with positive latching acc. to ISO 13850, unlocking only possible using key Also available without holder. Supplement with "-Z" and quote order code "B01". 2) The yellow backing plates must be ordered separately, see Accessories. /36 Siemens LV

17 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Signaling elements with holder Indicator light with concentric rings Color of lens DT Indicator lights Amber B 3SB AA unit With smooth lens 2) Red } 3SB AA unit Yellow B 3SB AA unit Green } 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Clear } 3SB AA unit Indicator lights Amber B 3SB BA unit With lens with concentric rings 2) Red B 3SB BA unit Yellow B 3SB BA unit Green B 3SB BA unit Blue B 3SB BA unit White B 3SB BA unit Clear B 3SB BA unit Acoustic signaling devices, IP40 3) Black B 3SB AA unit For acoustic signal transformer 24 V DC 4) (without BA s base) Acoustic signaling device Also available without holder. Supplement with "-Z" and quote order code "B01". 2) Inscription by inserting a label is not possible. 3) For acoustic signaling devices, IP65, see Complete Units. 4) To order 3SB102-2BN acoustic signal transformers separately, see Accessories. The 3SB A lampholder is also required; only version with screw terminals can be used. With front mounting, use in the enclosure is also possible. Inscriptions Twin pushbuttons with indicator light with holder Twin pushbuttons with indicator light, With flat, square buttons, including holder for 3 elements Color of handle DT I/O 2) Green/Red B 3SB BC unit I/O 2) White/Black B 3SB BC unit / 2) Green/Red D 3SB BC unit Twin pushbutton with indicator light, with flat buttons Twin pushbuttons with indicator light, With flat and raised, square buttons, including holder for 3 elements I/O 2) Green/Red B 3SB DC unit I/O 2) White/Black B 3SB DC unit Twin pushbutton with indicator light, with flat and raised buttons Also available without holder. Supplement with "-Z" and quote order code "B01". 2) Black inscription for green, red and white buttons; white inscription on black button. Siemens LV /37

18 Actuators and Indicators, Plastic, Round, 22 mm Actuators and indicators Siemens AG 2010 Twin pushbuttons with holder Twin pushbuttons, with flat, square buttons Twin pushbuttons, with flat and raised, square button Inscriptions Color of handle DT I/O 2) Green/Red B 3SB AC unit I/O 2) White/Black B 3SB AC unit I/O 2) Green/Red B 3SB CC unit I/O 2) White/Black B 3SB CC unit Twin pushbuttons with flat buttons Also available without holder. Supplement with "-Z" and quote order code "B01". 2) Black inscription for green, red and white buttons; white inscription on black button. Accessories for twin pushbuttons Use DT Label holders 70 mm x 30 mm For inscription label 12.5 mm x 27 mm Twin pushbuttons B 3SB3 22-0AY units Label holders Protective caps, clear Silicone, for degree of protection IP67 Twin pushbuttons with flat buttons B 3SB3 21-0AQ 1 1 unit Protective cap For blank labels see pages /70 and /71. /38 Siemens LV

19 Actuators and Indicators, Plastic, Square, 26 mm 26 mm Complete units Selection and ordering data Pushbutton Pushbutton Illuminated pushbuttons Pushbuttons with flat button Illuminated pushbuttons with flat button With integrated LED (including holder for 3 Illuminated pushbuttons with flat button With integrated LED (including holder for 3 Illuminated pushbuttons with flat button With BA s lampholder without lamp (including holder for 3 Inscription is possible by inserting a label. Rated voltage of lamp V Color of handle Contacts for front plate mounting DT Screw terminals -- Black 1 NO B 3SB AA unit Black 1 NC B 3SB AA unit Red 1 NC B 3SB AA unit Yellow 1 NO B 3SB AA unit Green 1 NO B 3SB AA unit Blue 1 NO B 3SB AA unit White 1 NO B 3SB AA unit AC/DC Black 1 NO + 1 NC B 3SB AA unit Red 1 NO + 1 NC B 3SB AA unit Yellow 1 NO + 1 NC B 3SB AA unit Green 1 NO + 1 NC B 3SB AA unit Blue 1 NO + 1 NC C 3SB AA unit White 1 NO + 1 NC B 3SB AA unit Red 1 NC B 3SB AA unit Yellow 1 NO B 3SB AA unit Green 1 NO B 3SB AA unit Blue 1 NO B 3SB AA unit White 1 NO B 3SB AA unit Clear 1 NO B 3SB AA unit Red 1 NO + 1 NC B 3SB AA unit Yellow 1 NO + 1 NC B 3SB AA unit Green 1 NO + 1 NC B 3SB AA unit Blue 1 NO + 1 NC B 3SB AA unit White 1 NO + 1 NC B 3SB AA unit Clear 1 NO + 1 NC B 3SB AA unit AC Red 1 NC B 3SB AA unit Yellow 1 NO C 3SB AA unit Green 1 NO B 3SB AA unit Blue 1 NO C 3SB AA unit White 1 NO B 3SB AA unit Clear 1 NO B 3SB AA unit Red 1 NO + 1 NC B 3SB AA unit Yellow 1 NO + 1 NC C 3SB AA unit Green 1 NO + 1 NC B 3SB AA unit Blue 1 NO + 1 NC C 3SB AA unit White 1 NO + 1 NC C 3SB AA unit Clear 1 NO + 1 NC B 3SB AA unit Red 1 NC B 3SB AA unit Yellow 1 NO B 3SB AA unit Green 1 NO B 3SB AA unit Blue 1 NO B 3SB AA unit White 1 NO B 3SB AA unit Clear 1 NO B 3SB AA unit Red 1 NO + 1 NC B 3SB AA unit Yellow 1 NO + 1 NC B 3SB AA unit Green 1 NO + 1 NC B 3SB AA unit Blue 1 NO + 1 NC B 3SB AA unit White 1 NO + 1 NC B 3SB AA unit Clear 1 NO + 1 NC B 3SB AA unit Siemens LV /3

20 Actuators and Indicators, Plastic, Square, 26 mm 26 mm Complete units Siemens AG 2010 Color of handle EMERGENCY-STOP devices acc. to ISO 13850, with yellow name plate, Ø 80 mm, with inscription. Can also be used with 3TK28 safety relays. EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with positive latching function With rotate-to-unlatch mechanism Contacts for front plate mounting DT Screw terminals Red 1 NC 2) B 3SB HA unit ) 1 NO + 1 NC B 3SB HA unit EMERGENCY-STOP mushroom pushbutton Rotate-to-unlatch mechanism German inscription "NOT-HALT". 2) Positive opening according to IEC , Appendix K. Signaling devices Indicator lights Indicator lights With integrated LED Indicator lights With integrated LED Indicator lights With BA s lampholder (without lamp) Rated voltage of lamp Color of lens DT Screw terminals V 24 AC/DC Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Clear B 3SB AA unit AC Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Clear B 3SB AA unit Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Clear B 3SB AA unit /40 Siemens LV

21 Actuators and Indicators, Plastic, Square, 26 mm 26 mm Actuators and indicators Selection and ordering data Pushbuttons and switches with holder Pushbutton Pushbuttons with flat button Pushbuttons with raised front ring (height 13 mm) Color of handle DT Black B 3SB AA unit Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Clear 2) B 3SB AA unit Black B 3SB AA unit Red B 3SB AA unit Green C 3SB AA unit White B 3SB AA unit Pushbutton with raised front ring Pushbuttons with raised front ring, castellated (height 13 mm) Black C 3SB AA unit Red C 3SB AA unit Yellow C 3SB AA unit Green C 3SB AA unit White C 3SB AA unit Pushbutton with raised front ring, castellated Illuminated pushbuttons with flat button (including holder for 3 Red 2) B 3SB AA unit Yellow 2) B 3SB AA unit Green 2) B 3SB AA unit Blue 2) B 3SB AA unit White B 3SB AA unit Clear 2) B 3SB AA unit Illuminated pushbuttons Pushbuttons, latching, with flat button, unlocking by pressing again Black B 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue C 3SB DA unit White B 3SB DA unit Pushbutton Illuminated pushbuttons, latching, with flat button (including holder for 3, unlocking by pressing again Red 2) B 3SB DA unit Yellow 2) B 3SB DA unit Green 2) B 3SB DA unit Blue 2) B 3SB DA unit White B 3SB DA unit Clear 2) B 3SB DA unit Illuminated pushbutton Also available without holder. Supplement with "-Z" and quote order code "B01". 2) Inscription is possible by inserting a label. Siemens LV /41

22 Actuators and Indicators, Plastic, Square, 26 mm 26 mm Actuators and indicators Siemens AG 2010 Selector switches with holder Selector switches Selector switches Illumination Selector switches with 2 switch positions O-I, 50 operating angle, latching O-I, 50 operating angle, momentary contact type Illuminated (including holder for 3 Selector switch, illuminated Non-illuminated Non-illuminated Illuminated (including holder for 3 Color of handle DT Black B 3SB KA unit Red B 3SB KA unit Green B 3SB KA unit White B 3SB KA unit Red B 3SB KA unit Yellow B 3SB KA unit Green B 3SB KA unit Blue B 3SB KA unit Clear B 3SB KA unit Black B 3SB LA unit Red C 3SB LA unit Green C 3SB LA unit White C 3SB LA unit Red B 3SB LA unit Yellow C 3SB LA unit Green C 3SB LA unit Blue C 3SB LA unit Clear B 3SB LA unit I-O-II 2 x 50 operating angle, momentary contact type I-O-II 2 x 50 operating angle, momentary contact type to the left, latching to the right Illuminated (including holder for 3 Illuminated (including holder for 3 Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue C 3SB DA unit Clear B 3SB DA unit Black B 3SB EA unit Red B 3SB EA unit Green C 3SB EA unit White C 3SB EA unit Red C 3SB EA unit Yellow C 3SB EA unit Green B 3SB EA unit Blue C 3SB EA unit Clear B 3SB EA unit Black B 3SB GA unit Green C 3SB GA unit White B 3SB GA unit I-O-II 2 x 50 operating angle, latching to the left, momentary contact type to the right Selector switch, illuminated Selector switches with 3 switch positions I-O-II Non-illuminated Black B 3SB DA unit x 50 operating angle, Red B 3SB DA unit latching Green C 3SB DA unit White C 3SB DA unit Non-illuminated Non-illuminated Non-illuminated Black B 3SB FA unit Red C 3SB FA unit Green B 3SB FA unit Also available without holder. Supplement with "-Z" and quote order code "B01". /42 Siemens LV

23 Actuators and Indicators, Plastic, Square, 26 mm 26 mm Actuators and indicators Key-operated switches with holder RONIS key-operated switch CES key-operated switch Lock version DT Type Lock Key No./ removal color position Key-operated switches with 2 keys and 2 switch positions O-I, 50 operating angle, latching O-I, 50 operating angle, momentary contact type RONIS SB 30 O+I B 3SB AD unit O B 3SB AD unit CES SSG 10 O+I B 3SB LD unit O B 3SB LD unit I B 3SB LD unit BKS O.M.R. 3) Red LSG 1 O+I C 3SB LF unit O B 3SB LF unit E2 for O B 3SB AE unit VW 2) E7 for O+I B 3SB AE unit VW 2) O B 3SB AE unit E for O B 3SB AE unit VW 2) Black O B 3SB AH unit O+I B 3SB AJ unit RONIS SB 30 O B 3SB BD unit CES SSG 10 O B 3SB MD unit O.M.R. key-operated switch Key-operated switches with 2 keys and 3 switch positions I-O-II, 2 x 50 operating angle, latching RONIS SB 30 I+O+II B 3SB DD unit CES SSG 10 I+O+II B 3SB PD unit O B 3SB PD unit I-O-II, 2 x 50 operating angle, momentary contact type RONIS SB 30 O B 3SB ED unit CES SSG 10 O B 3SB QD unit I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right CES SSG 10 O B 3SB SD unit I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right CES SSG 10 O+I C 3SB RD unit For BKS and CES special locks, see page /65. Also available without holder. Supplement with "-Z" and quote order code "B01". 2) Keys are not included in scope of supply. 3) According to FIAT standards; also available for other users. Siemens LV /43

24 BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT BG-PRÜFZERT Actuators and Indicators, Plastic, Square, 26 mm 26 mm Actuators and indicators Siemens AG 2010 EMERGENCY-STOP devices according to ISO and IEC , with holder 2). Can also be used with 3TK28 safety relays. EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with positive latching acc. to ISO 13850, rotate-to-unlatch mechanism Color of handle Approval DT Red B 3SB HA unit EMERGENCY-STOP mushroom pushbutton Rotate-tounlatch mechanism EMERGENCY-STOP mushroom pushbutton with RONIS key-operated switch EMERGENCY-STOP mushroom pushbutton with CES key-operated switch EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with RONIS key-operated switch (with 2 keys), lock No. SB 30, with positive latching acc. to ISO 13850, unlocking only possible using key EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with CWS key-operated switch (with 2 keys), lock No. SSG 10, with positive latching acc. to ISO 13850, unlocking only possible using key EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with BKS key-operated switch (with 2 keys), lock No. S1, with positive latching acc. to ISO 13850, unlocking only possible using key EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with O.M.R. key-operated switch (with 2 keys), lock No with positive latching acc. to ISO 13850, unlocking only using key Red B 3SB BA unit Red B 3SB KA unit Red B 3SB LA unit Red B 3SB MA unit EMERGENCY-STOP mushroom pushbutton with O.M.R. key-operated switch For BKS and CES special locks, see page /65. Also available without holder. Supplement with "-Z" and quote order code "B01". 2) The yellow backing plates must be ordered separately, see Accessories. Signaling elements with holder Color of lens DT Indicator lights Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit Clear B 3SB AA unit White B 3SB AA unit Indicator lights Also available without holder. Supplement with "-Z" and quote order code "B01". /44 Siemens LV

25 Selection and ordering data The following applies to all complete units: (UNIT) = 1 PS* = 1 UNIT PG = 102 Siemens AG 2010 Actuators and Indicators, Metal, Round, 22 mm Complete units Rated voltage of lamp Color of handle Contacts for front plate mounting DT Screw terminals Weight DT Spring-type terminals Weight Pushbutton Pushbutton with flat button Illuminated pushbutton with flat button Inscription is possible by inserting a label. V Pushbuttons with flat button -- Black 1 NO } 3SB AA C 3SB AA11-0CC Black 1 NC B 3SB AA C 3SB AA11-0CC Red 1 NC } 3SB AA C 3SB AA21-0CC Yellow 1 NO B 3SB AA C 3SB AA31-0CC Green 1 NO } 3SB AA C 3SB AA41-0CC Blue 1 NO B 3SB AA C 3SB AA51-0CC White 1 NO } 3SB AA C 3SB AA61-0CC Black 1 NO + 1 NC B 3SB AA C 3SB AA11-0CC Red 1 NO + 1 NC B 3SB AA C 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA C 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA C 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA C 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA C 3SB AA61-0CC Clear 1 NO + 1 NC C 3SB AA Illuminated pushbuttons with flat button with integrated LED 24 AC/DC Red 1 NC } 3SB AA C 3SB AA21-0CC Yellow 1 NO B 3SB AA C 3SB AA31-0CC Green 1 NO } 3SB AA C 3SB AA41-0CC Blue 1 NO B 3SB AA C 3SB AA51-0CC White 1 NO B 3SB AA C 3SB AA61-0CC Clear 1 NO } 3SB AA C 3SB AA71-0CC Red 1 NO + 1 NC B 3SB AA C 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA C 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA C 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA C 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA C 3SB AA61-0CC Clear 1 NO + 1 NC B 3SB AA C 3SB AA71-0CC AC Red 1 NC B 3SB AA Yellow 1 NO B 3SB AA Green 1 NO B 3SB AA Blue 1 NO B 3SB AA White 1 NO B 3SB AA Clear 1 NO D 3SB AA Red 1 NO + 1 NC B 3SB AA Yellow 1 NO + 1 NC B 3SB AA Green 1 NO + 1 NC B 3SB AA Blue 1 NO + 1 NC D 3SB AA White 1 NO + 1 NC B 3SB AA Clear 1 NO + 1 NC D 3SB AA AC Red 1 NC } 3SB AA C 3SB AA21-0CC Yellow 1 NO B 3SB AA C 3SB AA31-0CC Green 1 NO } 3SB AA C 3SB AA41-0CC Blue 1 NO D 3SB AA C 3SB AA51-0CC White 1 NO B 3SB AA C 3SB AA61-0CC Clear 1 NO } 3SB AA C 3SB AA71-0CC Red 1 NO + 1 NC B 3SB AA C 3SB AA21-0CC Yellow 1 NO + 1 NC B 3SB AA C 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA C 3SB AA41-0CC Blue 1 NO + 1 NC D 3SB AA C 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA C 3SB AA61-0CC Clear 1 NO + 1 NC B 3SB AA C 3SB AA71-0CC Siemens LV /45

26 Actuators and Indicators, Metal, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Siemens AG 2010 Rated voltage of lamp Color of handle Contacts for front plate mounting DT Screw terminals Weight DT Spring-type terminals Weight Pushbutton Illuminated pushbutton with flat button Illuminated pushbutton with flat button V Pushbuttons with flat button with BA s lampholder, without lamp -- Red 1 NC B 3SB AA C 3SB AA21-0CC Amber 1 NO D 3SB AA Yellow 1 NO B 3SB AA C 3SB AA31-0CC Green 1 NO B 3SB AA C 3SB AA41-0CC Blue 1 NO B 3SB AA C 3SB AA51-0CC White 1 NO B 3SB AA C 3SB AA61-0CC Clear 1 NO B 3SB AA B 3SB AA71-0CC Red 1 NO + 1 NC B 3SB AA C 3SB AA21-0CC Amber 1 NO + 1 NC C 3SB AA Yellow 1 NO + 1 NC B 3SB AA C 3SB AA31-0CC Green 1 NO + 1 NC B 3SB AA C 3SB AA41-0CC Blue 1 NO + 1 NC B 3SB AA C 3SB AA51-0CC White 1 NO + 1 NC B 3SB AA C 3SB AA61-0CC Clear 1 NO + 1 NC B 3SB AA C 3SB AA71-0CC Illuminated pushbuttons with flat solvent-resistant button 2), with integrated LED 24 V AC/DC Mushroom pushbuttons Red 1 NC B 3SB AA21-0PA Yellow 1 NO B 3SB AA31-0PA Green 1 NO B 3SB AA41-0PA Blue 1 NO B 3SB AA51-0PA White 1 NO B 3SB AA61-0PA Clear 1 NO B 3SB AA71-0PA Red 1 NO + 1 NC B 3SB AA21-0PA Yellow 1 NO + 1 NC B 3SB AA31-0PA Green 1 NO + 1 NC B 3SB AA41-0PA Blue 1 NO + 1 NC B 3SB AA51-0PA White 1 NO + 1 NC B 3SB AA61-0PA Clear 1 NO + 1 NC B 3SB AA71-0PA Mushroom push-pull buttons, Ø 40 mm, latching with pull-to-unlatch mechanism -- Red 1 NC B 3SB CA C 3SB CA21-0CC NO + 1 NC B 3SB CA C 3SB CA21-0CC Mushroom push-pull button Inscription is possible by inserting a label. 2) Not suitable for laser inscription. /46 Siemens LV

27 Actuators and Indicators, Metal, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Color of Contacts for handle/ front plate Lock No. mounting DT Screw terminals Weight DT Spring-type terminals Weight Selector switches Selector switches Selector switches, 2 switch positions O-I, 50 operating angle Black Heavy duty Selector switches, 3 switch positions switching sequence I-O-II, 2 x 50 operating angle Latching Standard Latching Momen tary contact type 1 NO } 3SB KA C 3SB KA11-0CC NO + 1 NC B 3SB KA C 3SB KA11-0CC NO C 3SB PA NO + 1 NC C 3SB PA Black 1 NO, 1 NO } 3SB DA C 3SB DA11-0CC Heavy duty 1 NO + 1 NC, 1 NO + 1 NC } 3SB DA C 3SB DA11-0CC NO, 1 NO C 3SB SA NO + 1 NC, 1 NO + 1 NC C 3SB SA Black 1 NO, 1 NO } 3SB EA C 3SB EA11-0CC Heavy duty 1 NO + 1 NC, 1 NO + 1 NC B 3SB EA C 3SB EA11-0CC NO, 1 NO C 3SB TA NO + 1 NC, 1 NO + 1 NC C 3SB TA Key-operated switches RONIS key-operated switch RONIS key-operated switch, 2 switch positions With 2 keys, removal position O + I, switching sequence O-I, 50 operating angle Latching SB 30 1 NO } 3SB AD C 3SB AD11-0CC NO + 1 NC B 3SB AD C 3SB AD11-0CC Siemens LV /47

28 Actuators and Indicators, Metal, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Color of handle Contacts for front plate mounting EMERGENCY-STOP devices acc. to ISO 13850, with yellow name plate, Ø 80 mm, with inscription EMERGENCY-STOP mushroom pushbutton Rotate-to-unlatch mechanism EMERGENCY-STOP mushroom pushbuttons with rotate-to-unlatch mechanism and switch position indication EMERGENCY-STOP mushroom pushbutton Pull-to-unlatch mechanism EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with positive latching function, with rotate-to-unlatch mechanism English inscription "EMERGENCY STOP" Red 1 NC 1 NO + 1 NC French inscription "ARRET D URGENCE" Red 1 NC 1 NO + 1 NC German inscription "NOT-HALT" Red 1 NC 1 NO + 1 NC Positive opening according to IEC , Appendix K. Can be used with 3TK28 safety relays. DT Screw terminals Weight B 3SB HR B 3SB HR B 3SB HP B 3SB HP DT Spring-type terminals Weight } 3SB HA B 3SB HA20-0CC B 3SB HA B 3SB HA20-0CC NC + 1 NC -- B 3SB HA20-0CC With rotate-to-unlatch mechanism and mechanical switch position indication English inscription "EMERGENCY STOP" Red 1 NC B 3SB HR NO + 1 NC B 3SB HR German inscription " NOT-HALT" Red 1 NC B 3SB HA B 3SB HA26-0CC NO + 1 NC B 3SB HA B 3SB HA26-0CC With pull-to-unlatch mechanism English inscription "EMERGENCY STOP" Red 1 NC 1 NO + 1 NC German inscription "NOT-HALT" Red 1 NC 1 NO + 1 NC Siemens AG 2010 B 3SB TR B 3SB TR B 3SB TA B 3SB TA20-0CC B 3SB TA B 3SB TA20-0CC NC + 1 NC -- B 3SB TA20-0CC /48 Siemens LV

29 Actuators and Indicators, Metal, Round, 22 mm Complete units (UNIT) = 1 PS* = 1 UNIT PG = 102 Indicator lights Indicator lights Rated voltage of lamp Inscription by inserting a label is not possible. Color of lens DT Screw terminals Weight DT Spring-type terminals Weight V Indicator lights with lens with concentric rings With integrated LED 24 AC/DC Red } 3SB BA C 3SB BA20-0CC Yellow B 3SB BA C 3SB BA30-0CC Green } 3SB BA C 3SB BA40-0CC Blue B 3SB BA C 3SB BA50-0CC White B 3SB BA C 3SB BA60-0CC Clear } 3SB BA C 3SB BA70-0CC AC Red B 3SB BA B 3SB BA20-0CC Yellow B 3SB BA B 3SB BA30-0CC Green B 3SB BA B 3SB BA40-0CC Blue B 3SB BA B 3SB BA50-0CC White B 3SB BA B 3SB BA60-0CC Clear B 3SB BA B 3SB BA70-0CC AC Red } 3SB BA C 3SB BA20-0CC Yellow B 3SB BA C 3SB BA30-0CC Green } 3SB BA C 3SB BA40-0CC Blue B 3SB BA C 3SB BA50-0CC White B 3SB BA C 3SB BA60-0CC Clear } 3SB BA C 3SB BA70-0CC With BA s lampholder, without lamp -- Red B 3SB BA C 3SB BA20-0CC Yellow B 3SB BA C 3SB BA30-0CC Green B 3SB BA C 3SB BA40-0CC Blue B 3SB BA C 3SB BA50-0CC White B 3SB BA C 3SB BA60-0CC Clear B 3SB BA C 3SB BA70-0CC Siemens LV /4

30 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Selection and ordering data Siemens AG 2010 Pushbuttons with holder Pushbuttons with flat button Pushbuttons with raised button Pushbutton with raised front ring Illuminated pushbuttons with flat button Illuminated pushbuttons with raised button Pushbutton with flat button Also available without holder. Supplement with " Z" and quote order code "B01". 2) Inscription is possible by inserting a label. 3) Not suitable for laser inscription. Pushbuttons with flat button Pushbuttons with flat solvent-resistant button 3) Pushbuttons with raised button Pushbuttons with raised front ring (height 15.5 mm) Illuminated pushbuttons with flat button (including holder for 3 Illuminated pushbuttons with flat solvent-resistant button 3) (including holder for 3 Illuminated pushbuttons with raised button (including holder for 3 Pushbuttons with flat button, latching Unlatches by pressing again Illuminated pushbuttons with flat button, latching Unlatches by pressing again (including holder for 3 Inscriptions Color of handle DT Black } 3SB AA unit Red } 3SB AA unit Yellow B 3SB AA unit Green } 3SB AA unit Blue B 3SB AA unit White } 3SB AA unit Gray B 3SB AB unit Clear 2) B 3SB AA unit I Green B 3SB AA unit O Red B 3SB AB unit I White B 3SB AB unit O Black B 3SB AB unit R Blue D 3SB AC unit Red C 3SB AA21-0PA0 1 1 unit Yellow C 3SB AA31-0PA0 1 1 unit Green C 3SB AA41-0PA0 1 1 unit Blue C 3SB AA51-0PA0 1 1 unit White C 3SB AA61-0PA0 1 1 unit Black B 3SB BA unit Red B 3SB BA unit Yellow B 3SB BA unit Green B 3SB BA unit Blue B 3SB BA unit White B 3SB BA unit Black B 3SB AA unit Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White B 3SB AA unit Amber 2) D 3SB AA unit Red 2) } 3SB AA unit Yellow 2) B 3SB AA unit Green 2) } 3SB AA unit Blue 2) B 3SB AA unit White B 3SB AA unit Clear 2) } 3SB AA unit Red 2) C 3SB AA21-0PA0 1 1 unit Yellow 2) C 3SB AA31-0PA0 1 1 unit Green 2) C 3SB AA41-0PA0 1 1 unit Blue 2) C 3SB AA51-0PA0 1 1 unit White C 3SB AA61-0PA0 1 1 unit Clear 2) C 3SB AA71-0PA0 1 1 unit Amber D 3SB BA unit Red B 3SB BA unit Yellow B 3SB BA unit Green B 3SB BA unit Blue B 3SB BA unit Clear B 3SB BA unit Black B 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue B 3SB DA unit White B 3SB DA unit Gray D 3SB DB unit Amber 2) D 3SB DA unit Red 2) B 3SB DA unit Yellow 2) B 3SB DA unit Green 2) B 3SB DA unit Blue 2) B 3SB DA unit White B 3SB DA unit Clear 2) B 3SB DA unit /50 Siemens LV

31 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Mushroom pushbuttons with holder Color of handle DT Mushroom pushbuttons, Ø 30 mm Black B 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Mushroom pushbutton, Ø 30 mm Mushroom pushbuttons, Ø 40 mm Black B 3SB GA unit Red B 3SB GA unit Yellow B 3SB GA unit Green B 3SB GA unit Mushroom pushbuttons, Ø 60 mm Black B 3SB QA unit Red B 3SB QA unit Yellow B 3SB QA unit Green B 3SB QA unit Mushroom pushbutton, Ø 40 mm Illuminated mushroom pushbuttons, Ø 30 mm (including holder for 3 Illuminated mushroom pushbuttons, Ø 40 mm (including holder for 3 Amber D 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit White B 3SB DA unit Amber D 3SB GA unit Yellow B 3SB GA unit Green B 3SB GA unit White B 3SB GA unit Illuminated mushroom pushbuttons, Ø 60 mm (including holder for 3 Amber D 3SB QA unit Yellow B 3SB QA unit Green B 3SB QA unit White B 3SB QA unit Illuminated mushroom pushbutton, Ø 60 mm Push-pull buttons, Ø 30 mm, latching, with pull-to-unlatch Black B 3SB EA unit Red B 3SB EA unit Push-pull buttons, Ø 40 mm, latching, with pull-to-unlatch Black B 3SB CA unit Red B 3SB CA unit Yellow B 3SB CA unit Green D 3SB CA unit Push-pull button, Ø 30 mm Push-pull buttons, Ø 60 mm, latching, with pull-to-unlatch Black B 3SB RA unit Red B 3SB RA unit Push-pull button, Ø 40 mm Push-pull button, Ø 60 mm, can be illuminated Push-pull buttons, Ø 30 mm, latching, with pull-to-unlatch, can be illuminated, (including holder for 3 Push-pull buttons, Ø 40 mm, latching, with pull-to-unlatch, can be illuminated, (including holder for 3 Push-pull buttons, Ø 60 mm, latching, with pull-to-unlatch, can be illuminated, (including holder for 3 Also available without holder. Supplement with " Z" and quote order code "B01". Amber D 3SB EA unit Red B 3SB EA unit Yellow B 3SB EA unit Green B 3SB EA unit Blue B 3SB EA unit Clear B 3SB EA unit Amber D 3SB CA unit Red B 3SB CA unit Yellow B 3SB CA unit Green B 3SB CA unit Blue B 3SB CA unit Clear B 3SB CA unit Amber D 3SB RA unit Red B 3SB RA unit Yellow B 3SB RA unit Green D 3SB RA unit Blue B 3SB RA unit Clear D 3SB RA unit Siemens LV /51

32 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Siemens AG 2010 Selector switches with holders Selector switch, 2 switch positions, standard version, 0 Selector switch, 2 switch positions, standard version, 50 Selector switch, 2 switch positions, heavy-duty version Selector switch, 2 switch positions, long handle Illumination Color of handle Selector switches with 2 switch positions O-I, 0 operating angle, latching O-I, 50 operating angle, latching Non-illuminated, standard version Non-illuminated, with solventresistant knob Illuminated, standard version, (including holder for 3 Non-illuminated, standard version Non-illuminated, with solventresistant knob Illuminated, standard version, (including holder for 3 Illuminated, with solventresistant knob (including holder for 3 Non-illuminated, heavy-duty version Illuminated, heavy-duty version, (including holder for 3 Non-illuminated, long handle Illuminated, long handle, (including holder for 3 Also available without holder. Supplement with " Z" and quote order code "B01". DT Black } 3SB HA unit Red A 3SB HA unit Green D 3SB HA unit White B 3SB HA unit Black B 3SB HA11-0PA0 1 1 unit Red B 3SB HA21-0PA0 1 1 unit Green B 3SB HA41-0PA0 1 1 unit Amber C 3SB HA unit Red C 3SB HA unit Yellow C 3SB HA unit Green C 3SB HA unit Blue C 3SB HA unit Clear C 3SB HA unit Black } 3SB KA unit Red B 3SB KA unit Green B 3SB KA unit White B 3SB KA unit Black D 3SB KA11-0PA0 1 1 unit Red D 3SB KA21-0PA0 1 1 unit Green B 3SB KA41-0PA0 1 1 unit Amber D 3SB KA unit Red B 3SB KA unit Yellow B 3SB KA unit Green B 3SB KA unit Blue B 3SB KA unit Clear B 3SB KA unit Red D 3SB KA21-0PA0 1 1 unit Green D 3SB KA41-0PA0 1 1 unit Blue D 3SB KA51-0PA0 1 1 unit Clear D 3SB KA71-0PA0 1 1 unit Black B 3SB PA unit Red C 3SB PA unit Green C 3SB PA unit White C 3SB PA unit Amber C 3SB PA unit Red C 3SB PA unit Yellow C 3SB PA unit Green C 3SB PA unit Blue C 3SB PA unit Clear C 3SB PA unit Black C 3SB PA unit Red C 3SB PA unit Green C 3SB PA unit White C 3SB PA unit Red C 3SB PA unit Yellow C 3SB PA unit Green C 3SB PA unit Blue C 3SB PA unit Clear C 3SB PA unit /52 Siemens LV

33 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Selector switches with holders Selector switch, 2 switch positions, standard version Selector switch, 2 switch positions, heavy-duty version Selector switch, 2 switch positions, long handle Illumination Color of handle Selector switches with 2 switch positions O-I, 50 operating angle, momentary contact type Non-illuminated, standard version Non-illuminated, with solventresistant knob Illuminated, standard version, (including holder for 3 Illuminated, with solventresistant knob (including holder for 3 Non-illuminated, heavy-duty version Illuminated, heavy-duty version, (including holder for 3 Non-illuminated, long handle Illuminated, long handle, (including holder for 3 Also available without holder. Supplement with " Z" and quote order code "B01". DT Black } 3SB LA unit Red B 3SB LA unit Green B 3SB LA unit White B 3SB LA unit Black B 3SB LA11-0PA0 1 1 unit Red B 3SB LA21-0PA0 1 1 unit Green B 3SB LA41-0PA0 1 1 unit Amber D 3SB LA unit Red B 3SB LA unit Yellow B 3SB LA unit Green B 3SB LA unit Blue B 3SB LA unit Clear B 3SB LA unit Red D 3SB LA21-0PA0 1 1 unit Green D 3SB LA41-0PA0 1 1 unit Blue D 3SB LA51-0PA0 1 1 unit Clear B 3SB LA71-0PA0 1 1 unit Black C 3SB QA unit Red C 3SB QA unit Green C 3SB QA unit White C 3SB QA unit Amber C 3SB QA unit Red C 3SB QA unit Yellow C 3SB QA unit Green C 3SB QA unit Blue C 3SB QA unit Clear C 3SB QA unit Black C 3SB QA unit Red C 3SB QA unit Green C 3SB QA unit Red C 3SB QA unit Yellow C 3SB QA unit Green C 3SB QA unit Blue C 3SB QA unit Clear C 3SB QA unit Siemens LV /53

34 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Siemens AG 2010 Selector switches with holders Selector switch, 3 switch positions, standard version Selector switch, 3 switch positions, heavy-duty version Selector switch, 3 switch positions, long handle Illumination Color of handle Selector switches with 3 switch positions I-O-II, 2 x 50 operating angle, latching I-O-II, 2 x 50 operating angle, momentary contact type Non-illuminated, standard version Non-illuminated, with solventresistant knob Illuminated, standard version (including holder for 3 Illuminated, with solventresistant knob (including holder for 3 Non-illuminated, heavy-duty version Illuminated, heavy-duty version, (including holder for 3 Non-illuminated, long handle Illuminated, long handle (including holder for 3 Non-illuminated, standard version Non-illuminated, with solventresistant knob Illuminated, standard version, (including holder for 3 Illuminated, with solventresistant knob (including holder for 3 Also available without holder. Supplement with " Z" and quote order code "B01". DT Black } 3SB DA unit Red B 3SB DA unit Green B 3SB DA unit White B 3SB DA unit Black B 3SB DA11-0PA0 1 1 unit Red B 3SB DA21-0PA0 1 1 unit Green B 3SB DA41-0PA0 1 1 unit Amber D 3SB DA unit Red B 3SB DA unit Yellow B 3SB DA unit Green B 3SB DA unit Blue B 3SB DA unit Clear B 3SB DA unit Red B 3SB DA21-0PA0 1 1 unit Green D 3SB DA41-0PA0 1 1 unit Blue B 3SB DA51-0PA0 1 1 unit Clear D 3SB DA71-0PA0 1 1 unit Black B 3SB SA unit Red C 3SB SA unit Green C 3SB SA unit White C 3SB SA unit Amber C 3SB SA unit Red C 3SB SA unit Yellow C 3SB SA unit Green C 3SB SA unit Blue C 3SB SA unit Clear C 3SB SA unit Black C 3SB SA unit Red C 3SB SA unit Green C 3SB SA unit White C 3SB SA unit Red C 3SB SA unit Yellow C 3SB SA unit Green C 3SB SA unit Blue C 3SB SA unit Clear C 3SB SA unit Black } 3SB EA unit Red B 3SB EA unit Green B 3SB EA unit White B 3SB EA unit Black B 3SB EA11-0PA0 1 1 unit Red B 3SB EA21-0PA0 1 1 unit Green B 3SB EA41-0PA0 1 1 unit Amber D 3SB EA unit Red B 3SB EA unit Yellow B 3SB EA unit Green B 3SB EA unit Blue B 3SB EA unit Clear B 3SB EA unit Red B 3SB EA21-0PA0 1 1 unit Green B 3SB EA41-0PA0 1 1 unit Blue B 3SB EA51-0PA0 1 1 unit Clear D 3SB EA71-0PA0 1 1 unit /54 Siemens LV

35 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Selector switches with holders Selector switch, 3 switch positions, standard version Selector switch, 3 switch positions, heavy-duty version Selector switch, 3 switch positions, long handle Illumination Selector switches with 3 switch positions I-O-II, 2 x 50 operating angle, momentary contact type I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right I-O-II, 2 x 50 operating angle, latching to the left, momentary contact type to the right Non-illuminated, heavy-duty version Illuminated, heavy-duty version, (including holder for 3 Non-illuminated, long handle Illuminated, long handle (including holder for 3 Non-illuminated, standard version Illuminated, standard version, (including holder for 3 Non-illuminated, heavy-duty version Illuminated, heavy-duty version Non-illuminated, long handle Non-illuminated, standard version Illuminated, standard version, (including holder for 3 Non-illuminated, heavy-duty version Illuminated, heavy-duty version Non-illuminated, long handle Also available without holder. Supplement with " Z" and quote order code "B01". Color of handle DT Black B 3SB TA unit Red C 3SB TA unit Green C 3SB TA unit White C 3SB TA unit Amber C 3SB TA unit Red C 3SB TA unit Yellow C 3SB TA unit Green C 3SB TA unit Blue C 3SB TA unit Clear C 3SB TA unit Black C 3SB TA unit Red C 3SB TA unit Green C 3SB TA unit White D 3SB TA unit Red C 3SB TA unit Yellow C 3SB TA unit Green C 3SB TA unit Blue C 3SB TA unit Clear C 3SB TA unit Black B 3SB GA unit Red B 3SB GA unit Green B 3SB GA unit White B 3SB GA unit Amber D 3SB GA unit Red D 3SB GA unit Yellow D 3SB GA unit Green B 3SB GA unit Blue D 3SB GA unit Clear D 3SB GA unit Black C 3SB VA unit Red C 3SB VA unit Green C 3SB VA unit White C 3SB VA unit Amber C 3SB VA unit Red C 3SB VA unit Yellow C 3SB VA unit Green C 3SB VA unit Blue C 3SB VA unit Clear C 3SB VA unit Black C 3SB VA unit Red C 3SB VA unit Black B 3SB FA unit Red D 3SB FA unit Green B 3SB FA unit White B 3SB FA unit Amber D 3SB FA unit Red D 3SB FA unit Yellow D 3SB FA unit Green B 3SB FA unit Blue D 3SB FA unit Clear B 3SB FA unit Black C 3SB UA unit Red C 3SB UA unit Green C 3SB UA unit White C 3SB UA unit Amber C 3SB UA unit Red C 3SB UA unit Yellow C 3SB UA unit Green C 3SB UA unit Blue C 3SB UA unit Clear C 3SB UA unit Black C 3SB UA unit Red C 3SB UA unit Green C 3SB UA unit White C 3SB UA unit Siemens LV /55

36 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Siemens AG 2010 Key-operated switches with holder RONIS key-operated switch CES key-operated switch BKS key-operated switch O.M.R. key-operated switch Lock version DT Type Lock Key No./ removal color position Key-operated switches with 2 keys, 2 switch positions O-I, 50 operating angle, latching O-I, 50 operating angle, momentary contact type For BKS and CES special locks, see page /65. Also available without holder. Supplement with " Z" and quote order code "B01". 2) Keys are not included in scope of supply. 3) According to FIAT standards; also available for other users. RONIS SB 30 O+I } 3SB AD unit O } 3SB AD unit I B 3SB AD unit CES SSG 10 O+I } 3SB LD unit O } 3SB LD unit I B 3SB LD unit LSG 1 O+I B 3SB LF unit O B 3SB LF unit BKS S1 O+I B 3SB AD unit O B 3SB AD unit O.M.R. 3) Light blue E1 for O B 3SB AE unit VW 2) E2 for O+I B 3SB AE unit VW 2) O B 3SB AE unit E7 for O+I B 3SB AE unit VW 2) O B 3SB AE unit E for O B 3SB AE unit VW 2) Red Black Yellow O+I B 3SB AG unit O B 3SB AG unit I B 3SB AG unit O+I B 3SB AH unit O B 3SB AH unit I B 3SB AH unit O+I B 3SB AJ unit O B 3SB AJ unit I B 3SB AJ unit O+I B 3SB AK unit O B 3SB AK unit I B 3SB AK unit RONIS SB 30 O } 3SB BD unit CES SSG 10 O } 3SB MD unit LSG 1 O B 3SB MF unit BKS S1 O B 3SB BD unit O.M.R. 3) Light blue Red Black Yellow O B 3SB BG unit O B 3SB BH unit O B 3SB BJ unit O B 3SB BK unit /56 Siemens LV

37 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Key-operated switches with holder RONIS key-operated switch CES key-operated switch Lock version DT Type Lock Key No./ removal color position Key-operated switches with 2 keys, 3 switch positions I-O-II, 2 x 50 operating angle, latching I-O-II, 2 x 50 operating angle, momentary contact type RONIS SB 30 I+O+II B 3SB DD unit O B 3SB DD unit I+II B 3SB DD unit I B 3SB DD unit II B 3SB DD unit O+I B 3SB DD unit CES SSG 10 O+I+II B 3SB PD unit O B 3SB PD unit I+II B 3SB PD unit I B 3SB PD unit II B 3SB PD unit BKS S1 O C 3SB DD unit I+II C 3SB DD unit O.M.R. 2) Light blue Red Black I+O+II B 3SB DG unit I+O+II B 3SB DH unit I+O+II B 3SB DJ unit O B 3SB DJ unit RONIS SB 30 O B 3SB ED unit CES SSG 10 O B 3SB QD unit BKS S1 O B 3SB ED unit O.M.R Black O B 3SB EJ unit BKS key-operated switch O.M.R. key-operated switch I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right I-O-II, 2 x 50 operating angle, momentary contact type to the left, latching to the right RONIS SB 30 O + II B 3SB GD unit O B 3SB GD unit CES SSG 10 O + II B 3SB SD unit O B 3SB SD unit II B 3SB SD unit BKS S1 O + II C 3SB GD unit O C 3SB GD unit O.M.R Yellow II C 3SB GK unit RONIS SB 30 O+I B 3SB FD unit CES SSG 10 O+I B 3SB RD unit O B 3SB RD unit I B 3SB RD unit BKS S1 O+I C 3SB FD unit O B 3SB FD unit I B 3SB FD unit For BKS and CES special locks, see page /65. Also available without holder. Supplement with " Z" and quote order code "B01". 2) According to FIAT standards; also available for other users. Siemens LV /57

38 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Siemens AG 2010 EMERGENCY-STOP devices according to ISO and IEC with holder 2). Can also be used with 3TK28 safety relays. EMERGENCY-STOP mushroom pushbuttons, Ø 32 mm, with positive latching acc. to ISO 13850, with rotate-to-unlatch mechanism Color of handle DT Red B 3SB FA unit Mushroom diameter 32 mm Mushroom diameter 40 mm, with rotate-to-unlatch mechanism, with switch position indication EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with positive latching acc. to ISO 13850, with rotate-to-unlatch mechanism Red Standard version } 3SB HA unit With mechanical switch position indication A 3SB HA unit With pull-to-unlatch mechanism Red B 3SB TA unit EMERGENCY-STOP mushroom pushbuttons, Ø 60 mm, with positive latching acc. to ISO 13850, with rotate-to-unlatch mechanism Red B 3SB AA unit Mushroom diameter 40 mm, pull-to-unlatch mechanism Mushroom diameter 60 mm Mushroom diameter 40 mm, with RONIS key-operated switch EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with RONIS key-operated switch, (with 2 keys), lock No. SB 30, with positive latching acc. to ISO 13850, unlocking only possible using key Red B 3SB BA unit EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with CES key-operated switch, (with 2 keys), lock No. SSG 10, with positive latching acc. to ISO 13850, unlocking only possible using key Red B 3SB KA unit EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with BKS key-operated switch, (with 2 keys), lock No. S1, with positive latching acc. to ISO 13850, unlocking only possible using key Red B 3SB LA unit EMERGENCY-STOP mushroom pushbuttons, Ø 40 mm, with O.M.R. key-operated switch (with 2 keys), lock No with positive latching acc. to ISO 13850, unlocking only using key Red B 3SB MA unit Mushroom diameter 40 mm, with CES key-operated switch For BKS and CES special locks, see page /65. Also available without holder. Supplement with " Z" and quote order code "B01". 2) The yellow backing plates must be ordered separately, see Accessories. /58 Siemens LV

39 Actuators and Indicators, Metal, Round, 22 mm Actuators and indicators Also available without holder. Supplement with " Z" and quote order code "B01". 2) Inscription by inserting a label is not possible. 3) Not suitable for laser inscription. Signaling elements with holder Indicator light with smooth lens Indicator lights with lens with concentric rings 2) Color of lens DT Amber B 3SB BA unit Red } 3SB BA unit Yellow B 3SB BA unit Green } 3SB BA unit Blue B 3SB BA unit White B 3SB BA unit Clear } 3SB BA unit Indicator lights Amber B 3SB AA unit with smooth lens 2) Red B 3SB AA unit Yellow B 3SB AA unit Green B 3SB AA unit Blue B 3SB AA unit White } 3SB AA unit Clear B 3SB AA unit Indicator lights with smooth solventresistant lens 2)3) Red C 3SB AA20-0PA0 1 1 unit Yellow D 3SB AA30-0PA0 1 1 unit Green C 3SB AA40-0PA0 1 1 unit Blue D 3SB AA50-0PA0 1 1 unit White C 3SB AA60-0PA0 1 1 unit Clear C 3SB AA70-0PA0 1 1 unit Siemens LV /5

40 Components for Actuators and Indicators Contact blocks and lampholders Selection and ordering data Diagram Operating travel Contact blocks for front plate mounting 3SB B 3SB M Contact blocks with one contact Mounting depth: 50 mm Contact closed Contact open DT Screw terminals 1 NO } 3SB B 1 1 unit NO with goldplated contacts C 3SB BA 1 1 unit NC 1 NC with goldplated contacts } 3SB C 1 1 unit C 3SB CA 1 1 unit With mounting monitoring contact 2), mounting depth 63 mm 1 NC Siemens AG 2010 B 3SB M 1 1 unit SB A Contact blocks with 2 contacts Mounting depth 63 mm (including unit labeling plate) 1 NO + 1 NC } 3SB A 1 1 unit NO + 1 NC B 3SB AA 1 1 unit with gold-plated contacts 1 NO leading + 1 NC lagging 1 NO leading + 1 NC lagging with gold-plated contacts B 3SB H 1 1 unit D 3SB HA 1 1 unit NO B 3SB D 1 1 unit NO with goldplated contacts B 3SB DA 1 1 unit NC B 3SB E 1 1 unit NC with goldplated contacts B 3SB EA 1 1 unit Blocks with 2 diodes type 1N 4007 Mounting depth: 63 mm U RMS = max. 250 V I FAV = 0.8 A at T u = 60 C B 3SB A 1 1 unit SB A Positive opening according to IEC , Appendix K. 2) The NC contact opens automatically upon disconnection of the actuator. On delivery, the contact is open (= safe state). Activation (= NC contacts on the non-actuated control device are closed) takes place upon first-time actuation after the contact block is snapped onto the actuator. Unsuitable for mounting in 3SB38 enclosures. /60 Siemens LV

41 Components for Actuators and Indicators Contact blocks and lampholders Diagram Rated voltage of lamp Contact blocks for front plate mounting 3SB A 3SB F 3SB PA 3SB BA s lampholders, mounting depth 50 mm Use these lamps only. 2) The lampholder with separate lamp test function can not be installed in an enclosure. 3) For circuit examples, see note on Technical Information on page /1. V DT Screw terminals 4) Not suitable for LEDs which are suitable only for AC or DC. 5) Not suitable for LED for 24/48/230 V AC/DC. For connecting to DC, X5 must be connected to L. Without lamp Acc. to lamp } 3SB A 1 1 unit With 24 V incandescent lamp (3SX1 344) 24 AC/DC B 3SB D 1 1 unit BA s lampholders, mounting depth 50 mm With built-in resistor for longer endurance and with 130 V lamp (3SX1 73 With integrated voltage reducer and with 130 V lamp (3SX1 73 BA s lampholders with separate lamp test function 2)3) With integrated voltage reducer and with 130 V lamp (3SX1 73 Without lamp For incandescent lamp, max. 2.6 W; for LED lamp, 24/48/230 V AC/DC 4) Without lamp For incandescent lamp, max. 2.6 W; for LED lamp, AC or DC 5) Without lamp For incandescent lamp, max. 2.6 W; for glow lamp, AC Lampholders with integrated LED Mounting depth: 50 mm 110/130 AC/DC B 3SB B 1 1 unit / 240 AC B 3SB C 1 1 unit / 240 AC B 3SB F 1 1 unit Acc. to lamp B 3SB G 1 1 unit Acc. to lamp B 3SB L 1 1 unit Acc. to lamp B 3SB H 1 1 unit Yellow X1 24 AC/DC B 3SB PA 1 1 unit Red k } 3SB PB 1 1 unit Green X2 + k } 3SB PC 1 1 unit Blue B 3SB PD 1 1 unit White NSD0_0122b } 3SB PE 1 1 unit Yellow X1 110 AC B 3SB QA 1 1 unit Red k B 3SB QB 1 1 unit Green + k B 3SB QC 1 1 unit Blue B 3SB QD 1 1 unit White X2 B 3SB QE 1 1 unit Yellow X1 230 AC B 3SB RA 1 1 unit Red k } 3SB RB 1 1 unit Green + k } 3SB RC 1 1 unit Blue B 3SB RD 1 1 unit White X2 } 3SB RE 1 1 unit Transformers For snapping onto 3SB A lampholder For incandescent lamp AC, max. 2 W Mounting depth: 7 mm AC/DC-LED X5 X1 (L+) X5 X1 (L+) X2 (L-) NSD0_00044b X2 (L-) NSD0_00046a NSD0_0126b NSD0_0126b 127 / 24 B 3SB A 1 1 unit / 24 B 3SB C 1 1 unit / 24 D 3SB E 1 1 unit / 24 B 3SB F 1 1 unit / 6 B 3SB M 1 1 unit / 6 B 3SB P 1 1 unit / 6 B 3SB S 1 1 unit / 6 B 3SB U 1 1 unit / 6 D 3SB W 1 1 unit Siemens LV /61

42 Components for Actuators and Indicators Contact blocks and lampholders Siemens AG 2010 V Contact blocks for front plate mounting 3SB B 3SB M 3SB A 3SB C 3SB3403-1PA Rated voltage of lamp/ Diagram Operating travel/color Contact closed Contact open Contact blocks with one contact Mounting depth 50 mm DT Spring-type terminals 1 NO B 3SB B 1 1 unit NO with B 3SB BA 1 1 unit gold-plated contacts 1 NC B 3SB C 1 1 unit NC with gold-plated contacts With mounting monitoring contact 2), mounting depth 63 mm 1 NC Contact blocks with 2 contacts Mounting depth 63 mm B 3SB CA 1 1 unit B 3SB M 1 1 unit NO B 3SB D 1 1 unit NO with D 3SB DA 1 1 unit gold-plated contacts 2 NC B 3SB E 1 1 unit NC with D 3SB EA 1 1 unit gold-plated contacts BA s lampholders, mounting depth 50 mm Without lamp Acc. to lamp B 3SB A 1 1 unit With integrated voltage reducer and with 130 V lamp (3SX1 73 3) Lampholders with integrated LED Mounting depth: 50 mm 1 NO + 1 NC B 3SB A 1 1 unit NO + 1 NC B 3SB AA 1 1 unit with goldplated con- tacts 1 NO leading + B 3SB H 1 1 unit NC lagging 1 NO leading + B 3SB HA 1 1 unit NC lagging with gold-plated contacts 230/240 V AC B 3SB C 1 1 unit V AC/DC Yellow B 3SB PA 1 1 unit X1 Red B 3SB PB 1 1 unit k Green B 3SB PC 1 1 unit X2 + k Blue B 3SB PD 1 1 unit White B 3SB PE 1 1 unit NSD0_0122b 110 V AC Yellow B 3SB QA 1 1 unit X1 Red B 3SB QB 1 1 unit k Green B 3SB QC 1 1 unit k Blue B 3SB QD 1 1 unit White B 3SB QE 1 1 unit X2 NSD0_0126b 230 V AC Yellow B 3SB RA 1 1 unit X1 Red B 3SB RB 1 1 unit k Green B 3SB RC 1 1 unit k Blue B 3SB RD 1 1 unit White B 3SB RE 1 1 unit X2 NSD0_0126b Positive opening according to IEC , Appendix K. 2) The NC contact opens automatically upon disconnection of the actuator. On delivery, the contact is open (= safe state). /62 Siemens LV For more explanations see footnote on page /60. Unsuitable for mounting in 3SB38 enclosures. 3) Use these lamps only.

43 Components for Actuators and Indicators Contact blocks and lampholders Diagram Operating travel Contact blocks for use on printed circuit boards 3SB B 3SB A Contact blocks with one contact Mounting depth 44 mm Contact closed Contact open DT Solder pin connections 1 NO B 3SB B 1 1 unit NC B 3SB C 1 1 unit Wedge base lampholders W2 x 4.6 d Mounting depth: 44 mm Without lamp B 3SB A 1 1 unit DT Holders for 3 contact blocks, for front panel mounting 3SB3 01-0AB Holders for pushbuttons and switches 2) For snapping on 3 blocks (for illuminated pushbuttons and illuminated selector switches the holder is included in the scope of supply) Holders for selector switches, key-operated switches and twin pushbuttons With pressure plate for actuating the central contact block of 3 contact blocks 3SB3 01-0AC Pressure plates for use on printed circuit boards Pressure plates for selector switches and key-operated switches For actuating the central contact 3SB3 01-0AW block of 3 contact blocks Accessories for printed circuit boards Holders for printed circuit boards For mounting the command devices on the printed circuit board (screw is included in the scope of supply) Positive opening according to IEC , Appendix K. 2) Holder also for mushroom pushbutton and push-pull button. } 3SB3 01-0AB units } 3SB3 01-0AC units B 3SB3 01-0AW units B 3SB3 01-0AA units SB3 01-0AA Siemens LV /63

44 Components for Actuators and Indicators AS-Interface F adapters for EMERGENCY-STOP devices Overview The AS-Interface F adapter is used to connect an EMERGENCY- STOP device according to ISO from the 3SB3 series to the AS-Interface bus system. The F adapter is suitable for control devices with mounting on front plates. The F adapter has a safe AS-Interface 2E slave and is snapped from behind onto the EMERGENCY-STOP device (actuator). In the 2I/1O expanded version, an output is also available for actuating an indicator light with LED. Connection to the AS-Interface bus cable is made with screw terminal or spring-type terminals depending on the version. Addressing is performed using the AS-Interface connection or the integrated addressing socket. Safety category 4 (SIL3) is achieved with the adapter. Selection and ordering data DT Screw terminals AS-Interface F adapters for 3SB3 EMERGENCY-STOP actuator For mounting on front plate 2I } 3SF AA unit I/1O, with output for LED control } 3SF AB unit SF AA03 DT Spring-type terminals AS-Interface F adapters for 3SB3 EMERGENCY-STOP actuator For mounting on front plate 2I } 3SF AA unit I/1O, with output for LED control } 3SF AB unit SF AA04 AS-Interface F adapters for 3SB3 EMERGENCY-STOP actuator For mounting on front plate DT Insulation piercing method 2I } 3SF AA unit I/1O, with output for LED control } 3SF AB unit SF AA05 /64 Siemens LV

45 Components for Actuators and Indicators Special locks Options Special locks for key-operated switches The BKS and CES plastic and metal key-operated switches, round and square versions, can be optionally equipped with special locks. In this case the of the matching key-operated switch must be supplemented with "-Z", the matching order code "Y01" or "Y02" and the required lock number. Order code Y01 Y02 In accordance with the table of special locks No Yes Normal delivery time 25 working days 5 working days Additional price per unit Ordering example On request 3SB LD01-Z Y01 Z = SSG18 On request 3SB LD01-Z Y02 Z = SSG11 Master and master-pass key systems The following key systems can be supplied with BKS and CES key-operated switches: 7 Central lock systems 7 Master key systems 7 Central master key systems 7 Master-pass key systems When placing an order you must supplement the of the matching key-operated switches with "-Z" and quote the order code "Y03". Please enquire for price and delivery time. Available special locks with order code "Y02" Key-operated switch CES SSG 11 to SSG 15 BKS E1, E2, E7, E BKS E EMERGENCY-STOP mushroom pushbuttons CES SSP BKS E2, E7, E with order code 3SB3... 4LD.. Z Y02 3SB3... 4MD01. Z Y02 3SB3... 4PD.. Z Y02 3SB3... 4QD.. Z Y02 3SB3... 4RD.. Z Y02 3SB3... 4SD.. Z Y02 3SB3... 5AD.. Z Y02 3SB3... 5BD01. Z Y02 3SB3... 5DD.. Z Y02 3SB3... 5ED01 Z Y02 3SB3... 5FD01 Z Y02 3SB3... 5GD01 Z Y02 3SB3... 5FD51 Z Y02 3SB3... 1KA20 Z Y02 3SB3... 1LA20 Z Y02 Master pass key Main group key Sub group key Example of master-pass key system NSD0_00075 Delivery of these BKS key-operated switches (locks for VW) without key. Notes 7 For all special locks, an additional price applies. 7 The order code "Y01" or "Y02" must be quoted in accordance with the above table. Automated processing of the order with a defined delivery time can be guaranteed only for correctly submitted orders. 7 For applications in which access security is important and several lock numbers are used, we recommend the use of BKS or CES key-operated switches. 7 Special locks for VW (E1, E2,...) will be delivered without keys, all others with 2 keys. Siemens LV /65

46 Inscriptions Laser inscriptions Siemens AG 2010 Overview Inscription of actuators and indicators Actuators and indicators of plastic as well as metal version can be optionally inscribed with a laser. Pushbutton (metal) with laser inscription The actuators of the pushbuttons, illuminated pushbuttons, mushroom pushbuttons and illuminated mushroom pushbuttons can be inscribed as well as the lenses of the indicator lights. Selector switches can be inscribed only if they are made of plastic (only one text line on the front ring). Pushbutton and selector switch (plastic) with laser inscription A letter height of 4 mm is used as standard for text inscriptions: The typeface used is Arial. Other letter heights and typefaces are possible, but must be specified when ordering. For round buttons and lenses, the possible number of characters per line is: 10 characters for one line of text 8 characters for 2 lines of text 6 characters for 3 lines of text, but 10 characters in the middle line On square buttons and lenses, 10 characters are possible per line. Ordering notes When ordering, supplement the of the actuator or the indicator light with " Z" and an order code: Text line in upper/lower case, always upper case for beginning of line (e. g. "Lift out"): Y10 Text in upper case (e. g. "LIFT OUT"): Y11 Text in lower case (e. g. "lift out"): Y12 Text in upper/lower case, all words begin with capital letters (e. g. "Lift Out"): Y15 Symbol with number according to ISO 7000 or IEC 60417: Y13 Any inscription or symbol according to order form supplement: Y1 Additional price per unit for Y10 to Y1 on request. When ordering, specify the required inscription in plain text in addition to the order number and order code. In the case of special inscriptions with words in languages other than German, give the exact spelling and specify the language (see ordering example. In the case of multi-line inscriptions, the text must be assigned to the respective line, e. g. "Z1 = Lift, Z2 =Lower". For long words you can also specify the end-of-line division. Symbols can also be ordered with numbers according to ISO 7000 or IEC (see ordering example 2 and 3). For special symbols (order code Y, a CAD drawing in DXF format can be submitted. Ordering example 1 A round pushbutton with the inscription "Reset" is required: 3SB AA41 Z Y10 Z = Reset (English) Ordering example 2 A square pushbutton inscribed with symbol No. 538 according to IEC is required: 3SB AA31 Z Y13 Z = 538 IEC Ordering example 3 A round pushbutton inscribed with symbol No according to ISO 7000 is required: 3SB AA41 Z Y13 Z = 1118 ISO /66 Siemens LV

47 Inscriptions Inscriptions by laser printer Overview Label inscriptions Using the Label Designer software, which can be downloaded from the Internet, and the inscription labels for laser inscription you can create your own customized labels with a standard laser printer. The self-adhesive or snap-on labels can be stuck or snapped onto the corresponding label holders (see Name plates). Round labels are provided for inserting in illuminated pushbuttons and switches. The labels are suitable for printing with one to three lines of text or symbols. For applications with more exacting requirements we recommend factory-printed inscription labels and insert labels (laserprinted or engraved depending on the type). You can find the Label Designer software on the Internet at: Selection and ordering data Labels for printing Color DT Insert labels Milky A 3SB3 01-2AB units For inserting in round illuminated pushbuttons and illuminated switches Inscription labels 12.5 mm x 27 mm For sticking onto label holder Inscription labels 27 mm x 27 mm For sticking onto label holder Inscription labels 17.5 mm x 28 mm For snapping onto label holder Inscription labels 22 mm x 22 mm For sticking onto enclosure White A 3SB3 02-2AA units White A 3SB3 03-2AA units White A 3SB3 05-2AA units White A 3SB3 06-2AA units Siemens LV /67

48 Inscriptions Insert labels Siemens AG 2010 Overview Pushbuttons (clear) and illuminated pushbuttons with a flat button can be fitted with insert labels for identification purposes, but indicator lights cannot. These insert labels are made of clear, transparent plastic with black inscription; they can be fitted in any 0 angle. Inscriptions The inscriptions have upper case initial letters. Graphic symbols, including those not listed in the catalog, are according to ISO 7000 or IEC (see page /6). The insert labels without inscription are suitable for user marking with permanent pen. Selection and ordering data (UNIT) = 100 (customized inscription: PS* = 10 units (customized inscription: 1 unit) PG = 102 Insert labels Inscription/Symbol Symbol No. DT Round range Weight DT Square range Weight For self-inscription Blank B 3SB1 01-4AS B 3SB3 40-4AA With inscription Ein B 3SB1 01-4AB B 3SB3 40-4AB On B 3SB1 01-4EB C 3SB3 40-4EB Aus B 3SB1 01-4AC C 3SB3 40-4AC Off B 3SB1 01-4EC C 3SB3 40-4EC Auf B 3SB1 01-4AD B 3SB3 40-4AD Up B 3SB1 01-4ED C 3SB3 40-4ED Ab B 3SB1 01-4AE B 3SB3 40-4AE Down B 3SB1 01-4EE C 3SB3 40-4EE Vor B 3SB1 01-4AF Forward B 3SB1 01-4EF C 3SB3 40-4EF Zurück B 3SB1 01-4AG Reverse B 3SB1 01-4EG C 3SB3 40-4EG Rechts B 3SB1 01-4AH Right C 3SB1 01-4EH Links B 3SB1 01-4AJ Left C 3SB1 01-4EJ Auf B 3SB1 01-4AD B 3SB3 40-4AD Open B 3SB1 01-4EP Zu B 3SB1 01-4AL B 3SB3 40-4AL Close B 3SB1 01-4EQ Schnell B 3SB1 01-4AM B 3SB3 40-4AM Fast B 3SB1 01-4ER Langsam B 3SB1 01-4AN B 3SB3 40-4AN Slow B 3SB1 01-4ES Betrieb B 3SB1 01-4AP Running B 3SB1 01-4EV Störung B 3SB1 01-4AQ C 3SB3 40-4AQ Fault B 3SB1 01-4EW Einrichten B 3SB1 01-4AR Reset B 3SB1 01-4EM C 3SB3 40-4EM Test B 3SB1 01-4EN Start B 3SB1 01-4EK B 3SB3 40-4EK Halt B 3SB1 01-4AK B 3SB3 40-4AK Stop B 3SB1 01-4EL B 3SB3 40-4EL With graphic symbol O (Off) 5008 IEC B 3SB1 01-4MB B 3SB3 40-4MB I (On) 5007 IEC B 3SB1 01-4MC B 3SB3 40-4MC II (On) -- B 3SB1 01-4MD B 3SB3 40-4MD Electric motor 0011 ISO B 3SB1 01-4PA Motion in direction of arrow 5022 IEC B 3SB1 01-4NA B 3SB3 40-4NA Increase, plus 5005 IEC B 3SB1 01-4NG B 3SB3 40-4NG Decrease, minus 5006 IEC B 3SB1 01-4MC B 3SB3 40-4MC With customized inscription For inscriptions or symbols see "Options" 3SB1 01-4AZ 3SB3 40-4AZ Text line(s) or symbol with No. D K0Y, K1Y, K2Y, K3Y or K5Y B K0Y, K1Y, K2Y, K3Y or K5Y Any inscription or symbol D KY B KY /68 Siemens LV

49 Inscriptions Insert labels Options Customized inscriptions The labels can be inscribed with text and symbols not listed in the ordering data. By default, a letter height of 4 mm (for a single line of text) or 3 mm (for 2 or 3 lines of text) is used for text inscriptions. The typeface used is Arial. Other letter heights and typefaces are possible, but must be specified when ordering. For round insert labels, the maximum possible number of characters per line is: 10 characters for one line of text 8 characters for 2 lines of text 6 characters for 3 lines of text, but 10 characters in the middle line On square insert labels, 10 characters are possible per line. Examples for customized inscription Lift Off Two-line inscription in upper/lower case lettering (K0Y) LIFT Single-line inscription in upper case lettering (K1Y) lift off down Three-line inscription in lower case letters (K2Y) Symbol number 5011 according to IEC (K3Y) Ordering notes Append the following codes to the : Text line(s) in upper/lower case, upper case always for beginning of line (e. g. "Lift out"): K0Y Text line(s) in upper case (e. g. "LIFT OUT"): K1Y Text line(s) in lower case (e. g. "lift out"): K2Y Text line(s) in upper/lower case, all words begin with upper case letters (e. g. "Lift Out"): K5Y Symbol with number according to ISO 7000 or IEC 60417: K3Y Any inscription or symbol according to order form supplement: KY When ordering, specify the required inscription in plain text in addition to the order number and order code. In the case of special inscriptions with words in languages other than German, give the exact spelling and specify the language. In the case of multi-line inscriptions, the text must be assigned to the respective line, e. g. "Z1 = Lift, Z2 =Lower". For long words you can also specify the end-of-line division (see ordering example. Symbols can also be ordered with numbers according to ISO 7000 or IEC (see ordering example 2 and 3). For special symbols (order code KY), a CAD drawing in DXF format can be submitted. Ordering example 1 A label with 2 lines of text is required: 3SB1 01 4AZ K1Y Z1 = LIFT Z2 = LOWER Ordering example 2 A label inscribed with symbol No according to IEC is required: 3SB1 01 4AZ K3Y Z = 5011 IEC Ordering example 3 A label inscribed with symbol No according to ISO 7000 is required: 3SB1 01 4AZ K3Y Z = 1118 ISO Any symbol according to order form supplement (KY) Siemens LV /6

50 Inscriptions Name plates Siemens AG 2010 Overview The name plates consist of a black plastic label holder and an inscription label (black with white print or silver-colored with black print) for sticking or snapping in place. They are not suitable for EMERGENCY-STOP pushbuttons. Note mounting dimensions! Inscriptions The inscriptions have upper case initial letters. The typeface is Arial. Graphic symbols, including those not listed in the tables, are according to ISO 7000 or IEC (see page /74). Self-adhesive labels There are 2 sizes available for the round and square ranges: Label holders 30 mm 45 mm 7 mm with inscription label 12.5 mm 27 mm. Label holders 30 mm 60 mm 7 mm with inscription label 27 mm 27 mm. Snap-on labels The following version is available for the round range: Label holders 2.8 mm 51 mm 3 mm with inscription label 17.5 mm 28 mm (inscription area: 17.5 mm 27 mm). Selection and ordering data (UNIT) = 100 (customized inscription: PS* = 10 units (customized inscription: 1 unit) PG = 102 Inscription labels, self-adhesive, 12.5 mm 27 mm Inscriptions DT Black Weight DT Silver-colored Weight For self-inscription Blank } 3SB3 02-1AA B 3SB1 01-2AA For label holders see page /73. With inscription Ein B 3SB3 02-1AB B 3SB1 01-2AB On B 3SB3 02-1EB B 3SB1 01-2EB Aus B 3SB3 02-1AC B 3SB1 01-2AC Off B 3SB3 02-1EC B 3SB1 01-2EC Auf B 3SB3 02-1AD B 3SB1 01-2AD Up B 3SB3 02-1ED B 3SB1 01-2ED Ab B 3SB3 02-1AE B 3SB1 01-2AE Down B 3SB3 02-1EE B 3SB1 01-2EE Vor B 3SB3 02-1AF B 3SB1 01-2AF Forward B 3SB3 02-1EF Zurück B 3SB3 02-1AG B 3SB1 01-2AG Reverse B 3SB3 02-1EG Rechts B 3SB3 02-1AH B 3SB1 01-2AH Right B 3SB3 02-1EH B 3SB1 01-2EH Links B 3SB3 02-1AJ B 3SB1 01-2AJ Left B 3SB3 02-1EJ B 3SB1 01-2EJ Auf B 3SB3 02-1AD B 3SB1 01-2AD Open B 3SB3 02-1EP B 3SB1 01-2EP Zu B 3SB3 02-1AL B 3SB1 01-2AL Close B 3SB3 02-1EQ B 3SB1 01-2EQ Schnell -- B 3SB1 01-2AM Fast -- B 3SB1 01-2ER Langsam -- B 3SB1 01-2AN Slow -- B 3SB1 01-2ES Halt B 3SB3 02-1AK B 3SB1 01-2AK Stop B 3SB3 02-1EK B 3SB1 01-2EK Start B 3SB3 02-1EL B 3SB1 01-2EL Test B 3SB3 02-1EN B 3SB1 01-2EN Betrieb B 3SB3 02-1AP B 3SB1 01-2AP Running -- B 3SB1 01-2EV Störung B 3SB3 02-1AQ B 3SB1 01-2AQ Fault B 3SB3 02-1EW B 3SB1 01-2EW Einrichten -- B 3SB1 01-2AR Reset -- B 3SB1 01-2EM Stop Start B 3SB3 02-1BC B 3SB1 01-2BC Hand Auto C 3SB3 02-1BA B 3SB1 01-2BA Man Auto B 3SB3 02-1EU B 3SB1 01-2EU Hand O Auto -- B 3SB1 01-2BE Man O Auto -- B 3SB1 01-2ET /70 Siemens LV

51 (UNIT) = 100 (customized inscription: PS* = 10 units (customized inscription: 1 unit) PG = 102 Inscription labels, self-adhesive, 12.5 mm 27 mm Siemens AG 2010 Inscriptions Inscriptions DT Black Weight DT Silver-colored Name plates Weight With graphic symbol O B 3SB3 02-1MB B 3SB1 01-2MB I B 3SB3 02-1MC B 3SB1 01-2MC II -- C 3SB1 01-2MD III -- B 3SB1 01-2ME O I B 3SB3 02-1MF B 3SB1 01-2MF I O II B 3SB3 02-1MG B 3SB1 01-2MG O 2 -- B 3SB1 01-2MK B 3SB3 02-1ML B 3SB3 02-1NJ B 3SB1 01-2NA B 3SB3 02-1NA B 3SB1 01-2NJ With customized inscription For inscriptions or symbols see "Options" 3SB3 02-1XZ 3SB1 01-2XZ Text line(s) C K0Y D K0Y Text line(s) or symbol with No. B K1Y, K2Y, K3Y or K5Y D K1Y, K2Y, K3Y or K5Y Any inscription or symbol B KY D KY Inscription labels, self-adhesive, 27 mm 27 mm For self-inscription With inscription For label holders see page /73. Inscriptions DT Black Weight DT Silver-colored Weight For self-inscription Blank B 3SB3 03-1AA B 3SB1 06-2AA With inscription Ein B 3SB3 03-1AB On B 3SB3 03-1EB Aus B 3SB3 03-1AC Off B 3SB3 03-1EC Auf B 3SB3 03-1AD Ab B 3SB3 03-1AE Vor B 3SB3 03-1AF Zurück B 3SB3 03-1AG Rechts B 3SB3 03-1AH Links B 3SB3 03-1AJ Auf B 3SB3 03-1AD Zu B 3SB3 03-1AL Halt B 3SB3 03-1AK Start B 3SB3 03-1EL Betrieb B 3SB3 03-1AP Störung B 3SB3 03-1AQ Stop Start B 3SB3 03-1BC Hand Auto B 3SB3 03-1BA With graphic symbol O C 3SB3 03-1MB O I B 3SB3 03-1MF B 3SB3 03-1NA With customized inscription For inscriptions or symbols see "Options" 3SB3 03-1XZ 3SB1 06-2XZ Text line(s) C K0Y D K0Y Text line(s) or symbol with No. B K1Y, K2Y, K3Y or K5Y D K1Y, K2Y, K3Y or K5Y Any inscription or symbol B KY D KY Siemens LV /71

52 Inscriptions Name plates (UNIT) = 100 (customized inscription: PS* = 10 units (customized inscription: 1 unit) PG = 102 Inscription labels, for snapping on, 17.5 mm 28 mm For label holders see page /73. Siemens AG 2010 Inscriptions DT Black Weight DT Silver-colored Weight For self-inscription Blank B 3SB3 05-1AA B 3SB1 04-2AA With inscription Ein B 3SB3 05-1AB B 3SB1 04-2AB On B 3SB3 05-1EB B 3SB1 04-2EB Aus B 3SB3 05-1AC B 3SB1 04-2AC Off C 3SB3 05-1EC B 3SB1 04-2EC Auf B 3SB3 05-1AD B 3SB1 04-2AD Up B 3SB3 05-1ED Ab B 3SB3 05-1AE B 3SB1 04-2AE Down C 3SB3 05-1EE Vor C 3SB3 05-1AF B 3SB1 04-2AF Forward B 3SB3 05-1EF Zurück B 3SB3 05-1AG B 3SB1 04-2AG Reverse B 3SB3 05-1EG B 3SB1 04-2EG Rechts B 3SB3 05-1AH B 3SB1 04-2AH Right B 3SB3 05-1EH Links -- B 3SB1 04-2AJ Auf B 3SB3 05-1AD B 3SB1 04-2AD Open C 3SB3 05-1EP Zu B 3SB3 05-1AL B 3SB1 04-2AL Close C 3SB3 05-1EQ Halt B 3SB3 05-1AK B 3SB1 04-2AK Stop B 3SB3 05-1EK B 3SB1 04-2EK Start B 3SB3 05-1EL B 3SB1 04-2EL Test -- B 3SB1 04-2EN Betrieb B 3SB3 05-1AP B 3SB1 04-2AP Running C 3SB3 05-1EV Störung B 3SB3 05-1AQ B 3SB1 04-2AQ Fault B 3SB3 05-1EW B 3SB1 04-2EW Einrichten -- B 3SB1 04-2AR Reset -- B 3SB1 04-2EM Stop Start B 3SB3 05-1BC B 3SB1 04-2BC Hand Auto B 3SB3 05-1BA B 3SB1 04-2BA Man Auto B 3SB3 05-1EU C 3SB1 04-2EU Man O Auto -- B 3SB1 04-2ET With graphic symbol O C 3SB3 05-1MB B 3SB1 04-2MB I C 3SB3 05-1MC B 3SB1 04-2MC O I B 3SB3 05-1MF B 3SB1 04-2MF I O II -- B 3SB1 04-2MG O 2 -- B 3SB1 04-2MK B 3SB3 05-1NA B 3SB1 04-2NA B 3SB3 05-1NJ B 3SB1 04-2NJ With customized inscription For inscriptions or symbols see "Options" 3SB3 05-1XZ 3SB1 04-2XZ Text line(s) C K0Y D K0Y Text line(s) or symbol with No. B K1Y, K2Y, K3Y or K5Y D K1Y, K2Y, K3Y or K5Y Any inscription or symbol B KY D KY /72 Siemens LV

53 Inscriptions Name plates Label holders for inscription labels 12.5 mm 27 mm DT Black For round range, flat B 3SB3 22-0AV units For potentiometer drives 3SB CH07 B 3SB3 22-0AS 1 1 unit For square range, flat B 3SB3 42-0AX units Label holders for inscription labels 27 mm 27 mm For round range, flat B 3SB3 23-0AV units For round range, raised C 3SB3 23-0AX 1 10 units For potentiometer drives, flat B 3SB3 23-0AS 1 1 unit For square range, flat B 3SB3 43-0AX unit Label holders for inscription labels 17.5 mm 28 mm For round design } 3SB3 25-0AV units This label holder can also be used for pushbuttons with dust covers if the front panel thickness of 3 mm is not exceeded. Siemens LV /73

54 Inscriptions Name plates Siemens AG 2010 Options Customized inscriptions The labels can be inscribed with text and symbols not listed in the ordering data. The following letter heights are used as standard for text inscriptions: Label size 12.5 mm 27 mm: maximum 3 lines with letter height 4 mm (1-line), 3.5 mm (2-line) or 2.5 mm (3-line) Label size 27 mm 27 mm: maximum 5 lines with letter height 4 mm (1- to 5-line) Label size 17.5 mm 28 mm: maximum 3 lines with letter height 4 mm (1- and 2-line) or 3 mm (3-line) Up to 11 characters per line are possible. The typeface used is Arial. Other letter heights and typefaces are possible, but must be specified when ordering. Examples for customized inscription Two-line inscription in upper/lower case lettering (K0Y) Single-line inscription in upper case lettering (K1Y) Three-line inscription in lower case letters (K2Y) Symbol number 5011 according to IEC (K3Y) Any symbol according to order form supplement (KY) Ordering notes Append the following codes to the : Text line(s) in upper/lower case, upper case always for beginning of line (e. g. "Lift out"): K0Y Text line(s) in upper case (e. g. "LIFT OUT"): K1Y Text line(s) in lower case (e. g. "lift out"): K2Y Text line(s) in upper/lower case, all words begin with upper case letters (e. g. "Lift Out"): K5Y Symbol with number according to ISO 7000 or IEC 60417: K3Y Any inscription or symbol according to order form supplement: KY When ordering, specify the required inscription in plain text in addition to the order number and order code. In the case of special inscriptions with words in languages other than German, give the exact spelling and specify the language. In the case of multi-line inscriptions, the text must be assigned to the respective line, e. g. "Z1 = Lift, Z2 =Lower". For long words you can also specify the end-of-line division (see ordering example. Symbols can also be ordered with numbers according to ISO 7000 or IEC (see ordering example 2 and 3). For special symbols (order code KY), a CAD drawing in DXF format can be submitted. Ordering example 1 A label with 2 lines of text is required: 3SB3 02 1XZ K1Y Z1 = LIFT Z2 = LOWER Ordering example 2 A label inscribed with symbol No according to IEC is required: 3SB3 02 1XZ K3Y Z = 5011 IEC Ordering example 3 A label inscribed with symbol No according to ISO 7000 is required: 3SB3 02 1XZ K3Y Z = 1118 ISO /74 Siemens LV

55 Accessories and Spare Parts Buttons and lenses Selection and ordering data Buttons and lenses for round version 3SB3 30-0CA6 3SB3 30-0EA3 3SB3 30-0DA4 3SB3 30-0FA4 3SB3 30-0GA3 3SB3 30-0HA4 3SB3 30-6BA3 In scope of supply of pushbuttons or indicator lights. 2) Not suitable for laser inscription. Color DT Buttons, flat For round illuminated pushbuttons and illuminated switches, plastic version Buttons, flat For round pushbuttons and switches, metal version Buttons, raised For round illuminated pushbuttons and illuminated switches, plastic version Buttons, raised For round pushbuttons and switches, metal version Buttons, flat For round illuminated pushbuttons and illuminated switches, metal version Buttons, flat, solvent-resistant 2), For round illuminated pushbuttons and switches, metal version Buttons, raised For round illuminated pushbuttons and illuminated switches, metal version Lenses, smooth For round indicator lights, plastic and metal version 3SB3 30-6CA3 Buttons and lenses for square version 3SB3 50-0CA6 3SB3 50-6AA2 Lenses with concentric rings For round indicator lights, plastic and metal version Buttons, flat For square illuminated pushbuttons and illuminated switches, plastic version Lenses, smooth For square indicator lights, plastic version Red B 3SB3 30-0CA units Yellow B 3SB3 30-0CA units Green B 3SB3 30-0CA units Blue B 3SB3 30-0CA units White B 3SB3 30-0CA units Clear B 3SB3 30-0CA units Black B 3SB3 30-0EA units Red B 3SB3 30-0EA units Yellow B 3SB3 30-0EA units Green B 3SB3 30-0EA units Blue B 3SB3 30-0EA units White B 3SB3 30-0EA units Clear B 3SB3 30-0EA units Red B 3SB3 30-0DA units Green B 3SB3 30-0DA units Clear B 3SB3 30-0DA units Black D 3SB3 30-0FA units Red C 3SB3 30-0FA units Yellow C 3SB3 30-0FA units Green C 3SB3 30-0FA units Blue C 3SB3 30-0FA units White C 3SB3 30-0FA units Clear C 3SB3 30-0FA units Amber B 3SB3 30-0GA units Red B 3SB3 30-0GA units Yellow B 3SB3 30-0GA units Green B 3SB3 30-0GA units Blue B 3SB3 30-0GA units White B 3SB3 30-0GA units Clear B 3SB3 30-0GA units Red B 3SB3 30-0GA20-0PA units Yellow B 3SB3 30-0GA30-0PA units Green B 3SB3 30-0GA40-0PA units Blue B 3SB3 30-0GA50-0PA units White B 3SB3 30-0GA60-0PA units Clear B 3SB3 30-0GA70-0PA units Amber C 3SB3 30-0HA units Red C 3SB3 30-0HA units Yellow C 3SB3 30-0HA units Green C 3SB3 30-0HA units Blue C 3SB3 30-0HA units White C 3SB3 30-0HA units Clear C 3SB3 30-0HA units Amber C 3SB3 30-6BA units Red B 3SB3 30-6BA units Yellow B 3SB3 30-6BA units Green B 3SB3 30-6BA units Blue B 3SB3 30-6BA units White B 3SB3 30-6BA units Clear B 3SB3 30-6BA units Amber B 3SB3 30-6CA units Red B 3SB3 30-6CA units Yellow B 3SB3 30-6CA units Green B 3SB3 30-6CA units Blue B 3SB3 30-6CA units White B 3SB3 30-6CA units Clear B 3SB3 30-6CA units Red B 3SB3 50-0CA units Yellow B 3SB3 50-0CA units Green B 3SB3 50-0CA units Blue B 3SB3 50-0CA units White B 3SB3 50-0CA units Clear B 3SB3 50-0CA units Red B 3SB3 50-6AA units Yellow B 3SB3 50-6AA units Green B 3SB3 50-6AA units Blue B 3SB3 50-6AA units White B 3SB3 50-6AA units Clear B 3SB3 50-6AA units Siemens LV /75

56 Accessories and Spare Parts Lamps, acoustic signal transformers and keys Selection and ordering data Lamps, BA s bases 3SB1 02-0AY 3SB3 01-1PA 3SB1 02-4MC 3SX1 703 Rated voltage Color DT Incandescent lamps 1.2 W Length up to 28 mm, max. bulb diameter 10 mm Incandescent lamps 2 W Length up to 28 mm, max. bulb diameter 10 mm Incandescent lamps 2.6 W Length 28 mm, bulb diameter 10 mm Multi-incandescent lamps 1.2 W, Endurance h, high resistance to vibration LED lamps, super-bright Length up to 28 mm, max. bulb diameter 10 mm, max. operational current 15 ma LED lamps Length up to 28 mm, max. bulb diameter 10 mm, max. operational current 15 ma LED lamps, flashing (1.4 Hz), length up to 28 mm, bulb diameter 10 mm, operational current ma Glow lamps 3) Length 28 mm, bulb diameter 10 mm, operational current 1.8 ma Lamp extractors For lamps with BA s base V 24 AC/DC Clear A 3SB1 02-0AY 1 10 units AC/DC Clear A 3SX units AC/DC A 3SX units AC/DC A 3SX units AC/DC B 3SB1 02-2AF 1 10 units AC/DC B 3SB1 02-1AP 1 10 units AC/DC A 3SR units ) Clear } 3SX units AC/DC B 3SB1 02-2BU 1 10 units AC/DC Red } 3SB3 01-1CA 1 10 units Yellow B 3SB3 01-1BA 1 10 units Green } 3SB3 01-1DA 1 10 units Blue B 3SB3 01-1PA 1 10 units White } 3SB3 01-1QA 1 10 units AC/DC Red B 3SB3 01-1CC 1 10 units Yellow B 3SB3 01-1BC 1 10 units Green B 3SB3 01-1DC 1 10 units Blue B 3SB3 01-1PC 1 10 units White B 3SB3 01-1QC 1 10 units AC, DC, if X1 at "+" Siemens AG 2010 Red B 3SB3 01-1CD 1 10 units Yellow B 3SB3 01-1BD 1 10 units Green B 3SB3 01-1DD 1 10 units Blue B 3SB3 01-1PD 1 10 units White B 3SB3 01-1QD 1 10 units AC, Red B 3SB3 01-1CF 1 10 units DC, Yellow B 3SB3 01-1BF 1 10 units if X1 at "+" Green B 3SB3 01-1DF 1 10 units Blue B 3SB3 01-1PF 1 10 units White B 3SB3 01-1QF 1 10 units AC/DC Red B 3SB3 01-1CG 1 10 units Yellow B 3SB3 01-1BG 1 10 units Green B 3SB3 01-1DG 1 10 units Blue B 3SB3 01-1PG 1 10 units White B 3SB3 01-1QG 1 10 units Red D 3SB1 02-4AJ 1 10 units Yellow D 3SB1 02-4BJ 1 10 units Green D 3SB1 02-4CJ 1 10 units DC Red B 3SB1 02-4LC 1 10 units Yellow C 3SB1 02-4MC 1 10 units Green C 3SB1 02-4NC 1 10 units AC Clear A 3SX units AC Clear A 3SX units AC Green C 3SX units } 3SB1 02-2AD 1 1 unit SB1 02-2AD Essential accessories when using lampholders with BA s base and delivery without lamp. 2) Also for 230 V when used with a 3SB C voltage reducer. 3) Due to the inherent orange color of glow lamps and their lower luminance level compared to incandescent lamps, it is recommended that they should only be used with clear or red screw lenses and in areas where ambient light levels are not very high. /76 Siemens LV

57 Accessories and Spare Parts Lamps, acoustic signal transformers and keys Lamps, Wedge bases 3SB2 08-1AE 3SB3 01-1SB 3SB3 01-1VE Incandescent lamps Wedge base W2 4.6 d, 1.0 W LED lamps, super-bright Wedge base W2 4.6 d, operational current 10 ma Lamp extractors For lamps with bases W2 4.6 d Rated voltage V Color DT 6 AC/DC Clear C 3SB2 08-1AA units AC/DC B 3SB2 08-1AB units AC/DC } 3SB2 08-1AC units AC/DC A 3SB2 08-1AD units AC/DC B 3SB2 08-1AE 1 10 units AC/DC B 3SB2 08-1AF 1 10 units AC/DC Red B 3SB3 01-1SB 1 10 units Yellow B 3SB3 01-1RB 1 10 units Green B 3SB3 01-1TB 1 10 units White B 3SB3 01-1UB 1 10 units Blue B 3SB2 08-1BD 1 10 units AC/DC Red B 3SB3 01-1SE 1 10 units Yellow B 3SB3 01-1RE 1 10 units Green B 3SB3 01-1TE 1 10 units White B 3SB3 01-1UE 1 10 units Blue D 3SB3 01-1VE 1 10 units } 3SB2 08-2AB 1 1 unit SB2 08-2AB Lamp adapters For fitting a lamp with a wedge base socket into a BA s lampholder 3SB1 02-1AU Acoustic signal transformers, BA s base 3SB1 02-2BN Can be used with lamp adapters in lampholders with BA s base. 2) For increased protection, the IP65 acoustic signaling device (complete unit) can be used. Keys for actuators 2) 3SY1 054 Acoustic signal transformers For acoustic signaling devices 2) Operational current 25 ma, 0.6 W, sound pressure 80 db/10 cm Included in scope of supply of the key-operated switches and the EMERGENCY-STOP mushroom pushbuttons with lock. 2) Also available with special lock. Supplement with "-Z" and quote the required lock in plain text. Additional price on request. This does not include locks for VW and main and general locking systems. C 3SB1 02-1AU 1 1 unit DC B 3SB1 02-2BN 1 1 unit Lock Color DT Manufacturer Lock No. Ronis SB 30 B 3SB3 10-4A 1 1 unit BKS S1 A 3SY unit CES LSG 1 B 3SB1 10-2F 1 1 unit SSG 10 B 3SY unit SSP A 3SY unit IKON K1 A 3SY unit O.M.R Light blue C 3SB1 10-2L 1 1 unit Red B 3SB1 10-2M 1 1 unit Black B 3SB1 10-2N 1 1 unit Yellow D 3SB1 10-2P 1 1 unit Siemens LV /77

58 Accessories and Spare Parts Protective covers Selection and ordering data Use Color DT Protective caps, degree of protection IP67 3SB3 21-0AJ Material: elastolan Protective caps For round version PVC Protective caps For square version Flat button (plastic) Clear B 3SB3 21-0AJ 1 1 unit Flat button Clear B 3SB3 21-0AM 1 1 unit (metal), raised button (plastic) Raised button (metal) Flat button (plastic) Clear C 3SB1 02-2AN 1 1 unit Clear B 3SB3 41-0AJ 1 1 unit SB3 41-0AJ Material: silicone Protective caps For round version Flat button (plastic) Clear B 3SB3 21-0AH 1 1 unit SB3 21-0AH Flat button Clear B 3SB1 02-0AK 1 1 unit (metal), raised button (plastic) 3SB1 02-0AK Raised button (metal) Clear B 3SB1 02-0AN 1 1 unit SB1 02-0AN Protective caps For round version Selector switch (plastic and metal, normal handle) Clear B 3SB3 21-0BA 1 1 unit SB3 21-0BA Protective caps For round version Mushroom push-pull button, Ø 40 mm (plastic and metal) Clear B 3SB1 02-2BH 1 1 unit SB1 02-2BH EMERGENCY- STOP mushroom pushbutton, Ø 40 mm (plastic and metal) Clear B 3SB3 21-0BU 1 1 unit SB3 21-0BU Protective caps For square version Flat button (plastic) Clear B 3SB3 41-0AH 1 1 unit SB3 41-0AH Not for mounting in 3SB38 enclosure with 3SB34 20 or 3SB34 23 contact blocks and lampholders for floor mounting. Not to be used with label holder. /78 Siemens LV

59 Accessories and Spare Parts Protective covers Other protective caps Use Color DT Sealable caps For round version Flat button (plastic) Black B 3SB1 02-0AL 1 1 unit SB1 02-0AL Flat button (metal), raised button (plastic) Clear B 3SB1 02-2AR 1 1 unit SB1 02-2AR Key-operated switch BKS, CES, IKON, O.M.R. Clear B 3SB3 21-0BT 1 1 unit SB3 21-0BT Protective collars for front plates 3SB3 21-0AX Protective collars for EMERGENCY-STOP 2) For round version Protective collars for EMERGENCY-STOP for 5 padlocks 2) For round version Dust covers For use in dusty environments EMERGENCY- STOP mushroom pushbutton without lock EMERGENCY- STOP mushroom pushbutton with lock 3SB3...-1AA20 EMERGENCY- STOP mushroom pushbutton Yellow } 3SB3 21-0AK 1 1 unit Gray C 3SB3 21-0AP 1 1 unit Yellow B 3SB3 21-0AX 1 1 unit Yellow } 3SB3 21-0CG 1 1 unit SB3 21-0CG Sun collars For round version Illuminated pushbuttons Black B 3SB3 21-0AS 1 1 unit SB3 21-0AS Blanking plugs for spare command points for front plates Blanking plugs For round version Plastic version Black } 3SB3 21-0AA 1 10 units SB3 21-0AA Blanking plugs For square version Plastic version Black B 3SB3 41-0AA 1 1 unit SB3 41-0AA Blanking plugs For round version Metal version Aluminized B 3SB1 02-0AQ 1 10 units SB1 02-0AQ Unsuitable for mounting in 3SB38 enclosures. Not to be used with label holder. 2) The protective collar must only be used to protect against inadvertent actuating and must be fitted to allow unimpeded actuation of the EMERGENCY- STOP mushroom pushbutton. Siemens LV /7

60 Accessories and Spare Parts Miscellaneous accessories Selection and ordering data Use Inscriptions DT Yellow name plates for EMERGENCY-STOP 3SB3 21-0AC 3SB3 21-0BW 3SB3 21-0DA Inscription labels For use on front plates Name plates, round Self-adhesive, external diameter 80 mm, hole 23 mm Name plates, round Self-adhesive, external diameter 80 mm, cut-out 26 mm 26 mm Name plates, round 1 mm thick, external diameter 75 mm, hole 22.5 mm Name plates, round Self-adhesive, external diameter 60 mm, hole 23 mm Illuminated, suitable as signaling device for EMER- GENCY-STOP, with plug-in connection for 24 V AC/DC 2) Inscription labels For supporting dust resistance EMERGENCY- STOP mushroom pushbutton (round version) EMERGENCY- STOP mushroom pushbuttons (square version) EMERGENCY- STOP mushroom pushbuttons (round version) EMERGENCY- STOP mushroom pushbutton (round version) Blank B 3SB3 21-0AB 1 1 unit languages, de, en, it, es B 3SB3 21-0BW 1 1 unit NOT-HALT B 3SB3 21-0AC 1 1 unit NOT-AUS B 3SB3 21-0CK 1 1 unit EMERGENCY STOP ARRET D URGENCE B 3SB3 21-0AD 1 1 unit B 3SB3 21-0AG 1 1 unit EMERGENZA B 3SB3 21-0AN 1 1 unit Blank B 3SB3 41-0AB 1 1 unit NOT-HALT B 3SB3 41-0AC 1 1 unit NOT-AUS B 3SB3 41-0BX 1 1 unit EMERGENCY STOP B 3SB3 41-0AD 1 1 unit Blank B 3SB1 02-2BA 1 1 unit NOT-HALT B 3SB1 02-2BB 1 1 unit NOT-AUS B 3SB3 21-0CH 1 1 unit Blank B 3SB3 21-0DA 1 1 unit NOT-HALT B 3SB3 21-0DK 1 1 unit NOT-AUS B 3SB3 21-0DC 1 1 unit EMERGENCY STOP B 3SB3 21-0DD 1 1 unit Contact blocks B 3SB3 01-0CH units SB3 01-0CH Unit labeling plates Contact blocks B 3TX H units TX H For front panel thickness of max. 4 mm. 2) The illuminated label can also be operated through the AS-Interface F adapter (see page /64). /80 Siemens LV