Kennedy Valve. A Division of McWane, Inc. UL/FM PRODUCTS

Transcription

1 A Division of McWane, Inc. UL/FM PRODUCTS 02 East Water Street Elmira, NY 4902 Phone: (607) Fax: (607) Fax: (800) PRICE LIST: WW 0202 EFFECTIVE DATE: February 0, 202

2 TERMS AND CONDITIONS These prices supersede and cancel all previous prices for these products. Prices and designs are subject to change without notice. All material will be invoiced at prices in effect on the date of shipment unless a prior written agreement is in effect. All contracts, orders or agreements are subject to approval by the Kennedy Valve office in Elmira, New York. All orders once entered; are subject to a 25% cancellation charge, and are subject to increased charges depending on the status and type of material ordered. Payment terms are as follows: freight allowed in the USA, except Alaska or Hawaii, on orders of 20,000 pounds or more, on orders of 5,000 9,999, freight allowed with next truck into the area. Orders of less than 5,000 will be prepay and add. NO FREIGH ALLOWANCE ON ORDERS FOR PARTS. Kennedy reserves the right to determine routing. Invoice Dates Terms st thru 5 th 2%, 30 th of that month; net 5 th of the following month 6 th thru 3 st 2%, 5 th of the following month; net 30 th of the following month Further, a ½% penalty will be applied to all invoices over 30 days past due. The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be added to the purchase price, and shall be paid by Buyer unless Buyer provides Kennedy with the exemption certificate acceptance to the taxing authorities. TERMS AND CONDITIONS CONT. All shipments are carefully examined, counted, and packed. The cost of any special packing or special handling caused by Buyer s requirements or requests shall be added to the amount of the order. No claim for shortages or errors in shipment will be all owed unless made in writing within five (5) days of receipt of shipment. For other than truckload shipments, claims for products damaged or lost in transit should be on the carrier, as Kennedy s responsibility ceases, and title passes, on delivery to the carrier. Shipments to customers shall be at all times subject to the approval of the Kennedy Valve Credit Department. Schedules of deliveries are estimates only, and do not constitute a guarantee that shipment will be made with the time given. Product offered from stock is subject to prior sale. Kennedy will make every effort to complete delivery of products as ordered, but Kennedy assumes no responsibility or liability, and will accept no back charge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accidents, delay of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Kennedy. Kennedy may terminate any contract of sale of its products without liability of any nature, by written notice to the Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Kennedy be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

3 LIMITED WARRANTY Kennedy Valve warrants that the goods furnished hereunder, will be free from defects in material and workmanship, and will operate freely without failure or leakage under the service conditions they were installed under. If within one () year from date of initial operation, but not more than eighteen (8) months from date of shipment by Kennedy Valve of any item of product(s), the purchaser discovers that such item(s) was not as warranted above, notifies Kennedy Valve in writing within 30 days from date purchaser discovered; or should have discovered, then Kennedy Valve shall remedy such nonconformance by, at Kennedy Valve s option, adjustment or repair or replacement of the item and any affected part of the product(s) within 30 days of such notice. Purchaser shall assume all responsibility and expense for removal, reinstallation and freight in connection with the foregoing remedies. Kennedy Valve shall not be liable for incidental or consequential losses, damages, or expenses, directly or indirectly arising from the sale, handling or use of the goods, of from any other cause relating thereto, and Kennedy Valve s liability hereunder in any case is expressly limited to replacement (in the form originally shipped) of goods not complying with this agreement, or, at Kennedy Valve s election, to the replacement of, or crediting Purchaser with, an amount equal to the purchase price of such goods whether such claims are for breech of warranty or negligence. Kennedy Valve reserves the right to change material composition without prior notice as long as it meets applicable standards. TEN YEAR LIMITED WARRANTY ON KENNEDY K8A & D GUARDIAN FIRE HYDRANT Kennedy Valve Company warrants that its Kennedy Guardian Fire Hydrant will be free from defects in material and workmanship under normal and customary use and maintenance for a period of ten (0) years from the date of purchase, provided the hydrant is installed and maintained according to Kennedy Valve instructions, and applicable codes. The foregoing warranty does not cover failure of any part or parts from external forces, including but not limited to earthquakes, vandalism, vehicular or other impact, application of excessive torque to the operating mechanism or frost heave. Should any Kennedy Valve Company part or parts fail to conform to the foregoing warranty, Kennedy Valve shall, upon prompt written notice thereof, repair or replace, F.O.B. point of manufacture, such defective part or parts. Purchaser shall, if requested, return the part or parts to Kennedy Valve, transportation prepaid. Purchaser shall bear all responsibility and expense incurred for removal, reinstallation and shipping in connection with any part supplied under the foregoing warranty. THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY OR FITNESS. IN NO EVENT SHALL KENNEDY VALVE COMPANY BE RESPONSIBLE OR LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL LOSSES, DAMAGES, OR EXPENSES. Kennedy Valve Company warrants that its Resilient Wedge valves will be free from defects in material and workmanship under normal and customary use and maintenance for a period of ten (0) years from the date of purchase, provided the valve is installed and maintained according to Kennedy Valve instructions, and applicable codes. The foregoing warranty does not cover failure of any part or parts from external forces, including but not limited to earthquakes, vandalism, vehicular or other impact, application of excessive torque to the operating mechanism or frost heave. Should any Kennedy Valve Company part or parts fail to conform to the foregoing warranty, Kennedy Valve shall, upon prompt written notice thereof, repair or replace, F.O.B. point of manufacture, such defective part or parts. Purchaser shall, if requested, return the part or parts to Kennedy Valve, transportation prepaid. Purchaser shall bear all responsibility and expense incurred for removal, reinstallation and shipping in connection with any part supplied under the foregoing warranty. THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES NOT EXPRESSLY SET FORTH HEREIN, WHETHER EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY OR FITNESS. IN NO EVENT SHALL KENNEDY VALVE COMPANY BE RESPONSIBLE OR LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL LOSSES, DAMAGES, OR EXPENSES.

4 EFFECTIVE DATE INDICATOR POSTS FIGURE 2945B (REPLACE 74-25) VERTICAL TYPE TO FACTORY SETTING 2,30.00 FIGURE 2945C (REPLACE 74-29) VERTICAL TYPE TO FACTORY SETTING 2,30.00 FIGURE 2945D (REPLACE 74-44) VERTICAL TYPE TO FACTORY SETTING 2, FIGURE 64-4 PIT POST 4, MINIMUM VERTICAL POST BURY DIMENSIONS (FACTORY SETTINGS) TELESCOPING BARREL 2945A VALVE 2945B 2945C 2945D SIZE MIN MAX MIN MAX MIN MAX 4" " " " " WEIGHT POSSIBLE BURY IS UP OR DOWN /2 THE "AVAILABLE ADJUSTMENT" OF THE LISTED DEPTH INDICATOR POSTS WITH "FIXED DEPTH OF BURY" POA ADD FOR EACH ADDITIONAL 6" OVER FACTORY SETTING ON FIGURE #2945C ADD FOR VERTICAL POST USED WITH 4" VALVE OR LARGER ADD FOR OPTIONAL GEAR COVER FOR ABOVE (P/N 46053P) ADD FOR 4" HANDWHEEL ON VERTICAL POST ( /4" SQUARE NUT) ADD FOR POTTER PCVS- TAMPER (MONITOR) SWITCH, NOT MOUNTED (460275P) WALL TYPE INDICATOR POST FIGURE NUMBER ,08.00 FOR USE WITH #870A FLANGED WALL POST VALVE ON PAGE FIG 55-ANGLE WALL POST KIT, USE 64-3 POST (STYLE A INCLUDES 2-8" STEMS), (STYLE B INCLUDES 2-24" STEMS),380.00

5 EFFECTIVE DATE UL/FM - DOUBLE DISC GATE VALVES DOUBLE C7 C7 C70 C68 DISC MJ PIV MJ PIV FLG FLG SIZE W/ACC L/ACC WALL POST OS&Y 4",762.00,58.00, " 2,202.00, ,8.00 8" 3, , , " 4, , , " 6, , , " POA POA POA POA NOTE: C7 MJ GATE VALVE USE WITH 2945 VERT POST ON PAGE 4 NOTE: C70 FLG GATE VALVE USE WITH 64-3 WALL POST ON PAGE 4 NOTE: () 2 /2" - 4" HAS A /2" TAP; 6" - 2" HAS A 3/4" TAP. (2) HI-RISE, UL ONLY, 300# WWP REPLACEMENT PART NUMBERS AND PRICES ARE AVAILABLE UPON REQUEST FROM FACTORY. FIGURE # 97 CHAINWHEEL - SPROCKET & CHAIN PRICES ARE SUBJECT TO CURRENT AWWA PRICES AND PARTS DISCOUNTS, AND MAY CHANGE WHILE THIS SHEET IS IN EFFECT. G300/W300 BFV # " OG/OW #-/ /2" # ", 4", 6" #2-/ " # ", 2" #3-/2 56 7

6 EFFECTIVE DATE VERTICAL INDICATOR POSTS - EXTENSION KITS LENGTH PART# LIST 8" EXT " EXT " EXT, " EXT, " EXT, " EXT, NOTE: ABOVE EXTENSION KITS INCLUDES ALL NECESSARY GASKETS AND NUTS & BOLTS ALONG WITH THE STEM, BARREL, AND COUPLING. EXTENSION STEM COUPLING EXTENSION PIPE COUPLING PIPE COUPLING SET SCREWS WALL POST PARTS PRICE LIST ITEM # PART# DESCRIPTION LIST PRICE WP P EYE BOLT 3 WP P NUT /2-UNC PLATED 2 WP P WASHER 5/8 O PLATED 4 WP HANDWHEEL - 4" DIAMETER 20 WP COVER 54 WP P RETAINING RING 34 WP OPERATING STEM NUT 33 WP P NUTS /2-UNC PLATED 2 WP P BOLT /2-UNC x 2" 7 WP P BOLT /2-UNC x.75" 2 WP TOP SECTION 888 WP TARGET NUT 205 WP P WINDOWS - FLAT 8 WP P SCREWS 4 WP P FERRULE 9 WP P PROTECTIVE STEEL PLATE 0 WP-7A P TARGET PLATE - OPEN 26 WP-7B P TARGET PLATE - SHUT 26 WP P CLAMPS - PLATED 6 WP P NUTS /4-20 UNC 3 WP P MACH SCREW /4-20 x 7/8 LG 3 WP P PIPE PLUS - /2 NPT 6 WP-22/23/ S/A STEM 57 WP-22/23/ L STEM (ORDER BY LENGTH) POA WP P COTTER PIN /4 x 3 LG 9 WP & CRANE COUPLING 88

7 EFFECTIVE DATE UL/FM DOMESTIC BUTTERFLY VALVES (INCLUDE TAMPER PROOF DPDT SWITCHES) SIZE 2 /2" 3" 4" 6" 8" ** G300 (GROOVED) ,056.00,56.00 W300 (WAFER) , NOTE: UL/FM BUTTERFLY VALVES ARE RATED AT 300 PSI NOTE: ** 8" ARE FIGURE OG AND OW NOTE: THE G300 AND W300 ARE UL 09 LISTED FOR INDOOR OR AMBIENT OUTDOOR SERVICE WITHOUT DIRECT EXPOSURE TO PRECIPITATION OR BEING SUBMERGED. TAMPER SWITCHES FOR OG AND OW FIGURE NO. BFV PART NO TAMPER PROOF WRENCH FOR OG AND OW FIG NO PBF PART NO P MASTERGEAR ACTUATOR FOR G300 AND W300 BFV PART NO P 250 UL/FM CHECK VALVES 26 26A R BRONZE FACED RUBBER FACED TOP ENTRY #426 WITH TAPS DISC-FLANGED DISC-FLANGED WAFER CHECK GROOVED CHECK FOR USE AS A SIZE CHECK VALVE CHECK VALVE VALVE PSI VALVE 250 PSI RISER CHECK 2 /2",027.00, ",535.00, " 2, , ,404.00, " 4, ,085.00, , " 6, , " 9, , ADD FOR TAPPING: FLANGED SWING CHECK VALVES (FIG. 26 & 26A) ARE FACTORY TAPPED AT 3/4" AT POSITION 'C' FOR DRAIN. GROOVED CHECKS ARE ALSO TAPPED /2" FOR BALL DRIP. ALL OTHER TAPS ARE AN ADDER OF PER TAP TO LIST PRICE. MAXIMUM TAP SIZES ARE: 3/4" ON 2 /2" & 3" VALVES; " ON 4"; /4" ON 5" & 6", AND /2" ON 8" TO 2" VALVES. ADD FOR #426R TRIM KITS TRIM KITS INCLUDE: TWO GUAGES, TWO /4" 3-WAY GLOBE VALVES, TWO /4" PLUGS, TWO /4" X (xx") NIPPLES, AND ONE /4" OR /2" NIPPLE FOR ANGLE VALVE. 2 /2" - 4" VALVES HAVE /4" ANGLE VALVES, AND 6" & 8" VALVES HAVE A /2" ANGLE VALVE.