KME WARRANTY SUMMARY 2016

Transcription

1 TAB 6 WARRANTIES

2 KME WARRANTY SUMMARY 2016 The following warranty requirements are considered minimum at KME. No KME warranties are ever pro-rated. All warranties will cover all labor and parts replacement during the warranty period. Parts replaced under this warranty will be of original equipment manufacturer (OEM) quality or higher. Service to the vehicle/equipment will be at a level to maintain or meet the manufacturer's requirements to sustain the warranty. This warranty, however, does not include items that must be replaced through ordinary wear and tear. Those parts ordinarily replaced through the servicing program will be replaced as part of the servicing program of equipment/vehicles, if appropriate. Listed below is a brief summary of the warranties offered by KME and the major component manufacturers included in the KME proposal. APPARATUS BODY 10 YEARS HIGHLY ADVANTAGEOUS KME BUILT CHASSIS 5 YEARS HIGHLY ADVANTAGEOUS KME FRAME UNLIMITED EXCEEDS HIGHLY ADVANTAGEOUS ALLISON TRANSMISSION 5 YEARS HIGHLY ADVANTAGEOUS CUMMINS ENGINE 10 YEARS HIGHLY ADVANTAGEOUS ELECTRICAL 5 YEARS ADVANTAGEOUS PUMP PARTS 5 YEARS HIGHLY ADVANTAGEOUS PUMP LABOR 5 YEARS HIGHLY ADVANTAGEOUS WATER TANK LIFETIME EXCEEDS HIGHLY ADVANTAGEOUS AERIAL DEVICE 20 YEARS EXCEEDS HIGHLY ADVANTAGEOUS STABILIZATION STRUCTURE 20 YEARS EXCEEDS HIGHLY ADVANTAGEOUS FIXED WATERWAY 10 YEARS ADVANTAGEOUS RUST 10 YEARS HIGHLY ADVANTAGEOUS PAINT 10 YEARS HIGHLY ADVANTAGEOUS GRAPHICS 10 YEARS HIGHLY ADVANTAGEOUS

3 ADDITIONAL WARRANTIES OFFERED BY KME STAINLESS STEEL PIPING AKRON VALVES BOSTROM SEATS KME CAB STRUCTURAL KME COOLING SYSTEM USSC SEATING 10 YEARS 10 YEARS 5 YEARS 10 YEARS 5 YEARS 6 YEARS

4 KME PROVIDES THE STRONGEST WARRANTY PACKAGE IN THE INDUSTRY. NO KME WARRANTY IS PRO-RATED KME WARRANTY, STARTING ON DELIVERY DATE Warranty coverage by KME will begin on the date of delivery to the customer. WARRANTY - BODY STRUCTURE - 10 YEARS The proposed body will be warranted against structural defects for a period of ten (10) years from the date of acceptance of the unit. Details of warranty coverage, limitations and exclusions are included in the specific warranty document. WARRANTY - KME CHASSIS - 5 YEARS The proposed vehicle includes a five (5) year new vehicle warranty, upon delivery and acceptance of the vehicle. The warranty will ensure that the vehicle has been manufactured to the proposed contract specifications and will be free from defects in material and workmanship that may appear under normal use and service within the warranty period. The warranty may be subject to different time and mileage limitations for specific components and parts. This warranty is issued to the original purchaser of the vehicle. The warranty will not apply to tires, batteries, or other parts or components that are warranted directly by their manufacturers. The warranty will not apply to routine maintenance requirements as described in the service and operators manual. No warranty whether express, implied, statutory or otherwise including, but not limited to any warranty of merchantability or fitness for purpose will be imposed. OVERALL UNIT AND CUSTOM CHASSIS - 5 YEARS All components and parts of the vehicle are warranted for a period of five (5) years from acceptance of the vehicle, unless excluded elsewhere in this warranty or described as having longer time limitations. WARRANTY - CUSTOM CHASSIS FRAME RAILS - UNLIMITED TIME AND MILEAGE The proposed KME custom chassis frame and cross members will be warranted for an unlimited time period. A copy of KME's frame rail warranty will be supplied to define additional details of the warranty provisions. WARRANTY - TRANSMISSION - 5 YEARS The proposed Allison transmission will be provided with a five (5) year warranty. A copy of the Allison transmission warranty will be supplied to the purchaser to define additional details of the warranty provisions.

5 WARRANTY - EXTENDED WARRANTY, CUMMINS ISX ENGINES - 10 YEARS The Cummins engine will be warranted for a period of Ten (10) years or 200,000 miles, whichever occurs first. 100% parts and labor $100 Deductible* after base warranty Complete engine coverage includes EGR components (excluding all maintenance components and accessories which bear the name of another company) Maintenance components excluded from coverage include, but are not limited to: fuel injectors, fuel pump, turbocharger, air compressor, fan clutch, water pump, fan hub, fan idler pulley assembly, vibration damper, belts, hoses, belt tensioner, and thermostat. Major components Engine cylinder block casting Engine cylinder head castings and capscrews Engine crankshaft forging Engine camshaft forging Engine connecting rods Flywheel housing Intake manifold castings Valve covers Oil cooler cover/filter heads Oil pan Gear cover and housing Gear train gears Crankshaft gear Camshaft idler gear Accessory drive gear Fuel pump drive gear WARRANTY - ELECTRICAL - 5 YEARS KME provides a 5 year electrical warranty as a part of the 5 year chassis warranty shown above.

6 WARRANTY - PUMP PARTS - 10 YEARS Waterous warrants, to the original Buyer only, that products manufactured by Waterous will be free from defects in material and workmanship under normal use and service for a period of ten (10) years from the date the product is first placed in service. This warranty covers 100% of all parts for the full term of the warranty. WARRANTY - PUMP LABOR - 10 YEARS Waterous warrants, to the original Buyer only, that products manufactured by Waterous will be free from defects in material and workmanship under normal use and service for a period of ten (10) years from the date the product is first placed in service. This warranty covers 100% of all labor for the full term of the warranty. WARRANTY - WATER TANK - LIFETIME The proposed water tank will be warranted by the water tank manufacturer for the "Lifetime" of the unit. A copy of the manufacturer's warranty will be supplied to define additional details of the warranty provisions. WARRANTY - AERIAL DEVICE STRUCTURE - 20 YEARS The proposed aerial device weldment, including outriggers, torque box, turntable and ladder sections will be warranted against loss of integrity or failure due to defects in material or workmanship for a period of twenty (20) years from the date of acceptance of the unit. WARRANTY - STABILIZATION STRUCTURE - 20 YEARS KME provides a 20 year warranty on the aerial stabilization components as part of the aerial device structural warranty shown above. WARRANTY - AERIAL WATERWAY - 10 YEARS The proposed aerial waterway will be covered by a ten (10) year warranty to cover the waterway seals and individual tube assemblies. A copy of this warranty will be provided to the end user. WARRANTY - CORROSION - 10 YEARS The proposed cab and body will be warranted against rust-through or perforation, due to corrosion from within, for a period of ten (10) years. Perforation is defined as a condition in which an actual hole occurs in a sheet metal panel due to rust or corrosion from within. Surface rust or corrosion caused by chips or scratches in the paint is not covered by this warranty. WARRANTY - PAINT - 10 YEARS The proposed paint finish will be warranted for a period of ten (10) years from the date of acceptance of the unit. Details of warranty coverage, limitations and exclusions are included in the specific warranty document.

7 WARRANTY - LETTERING - 10 YEARS Kovatch Mobile Equipment Corporation shall provide a ten (10) year warranty against defects in material and workmanship for all graphic processes. Any valid claims must be made in writing with in 15 days of the determination of any defects to KME Fire Apparatus. KME Fire Apparatus will at its option make any necessary repairs either at a local authorized service center or at the factory, if required. KME Fire Apparatus will make the final decision as to where the repairs are to be made and any transportation cost are the owners responsibility, KME will at its option repair or replace any verified defects in workmanship or materials at no cost to the owner provided all the requirements of this warranty have been met. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. THE COMPANY MAKES NO OTHER WARRANTY, EXPRESSED OF IMPLIED, AND SPECIFICALLY, DISCLAIMS ANY IMPLIED WARRANTY INCLUDING THE WARRANTY OF MERCHANTABILITY. KME continually strives to improve its products and therefore, reserves the right to make improvements or changes without incurring any obligations to make such changes or additions on equipment previously sold. WARRANTY - CAB STRUCTURE - 10 YEARS The proposed cab will be warranted against structural defects for a period of ten (10) years from the date of acceptance of the unit. Details of warranty coverage, limitations and exclusions are included in the specific warranty document. WARRANTY - STAINLESS STEEL PLUMBING WARRANTY - 10 YEARS The proposed stainless steel plumbing will be warranted for a period of ten (10) years from the date of acceptance of the unit. Details of warranty coverage, limitations and exclusions are included in the specific warranty document. WARRANTY - RUNG COVERS - 10 YEARS The proposed composite fiberglass rung covers will be free from defects in material and workmanship for a period of 10 years. The warranty above will apply to the products being subjected to foot traffic, for which they were designed. It will not apply when they are being subjected to heavy machinery, steel or plastic wheeled dollies, or to solvent cleaning.

8 WARRANTY - COOLING SYSTEM - CUSTOM CHASSIS - 5 YEARS Kovatch Mobile Equipment (KME) warrants all Cooling System Equipment components used in the construction of KME Fire Apparatus against defects and workmanship provided the apparatus is used in a normal and reasonable manner. This warranty is extended only to the original user-purchaser for a period of five (5) years from the date of delivery / acceptance to the original user-purchaser, whichever occurs first. This warranty applies to both purchased, fabricated and manufacturer supplied, coolant system components, and is not provided in lieu of any Vendor provided warranties. All coolant system components provided by the engine manufacturer are covered by the engine manufacturer s warranty only WARRANTY - AKRON PRODUCTS - 5 YEARS The limited warranty set forth here against defective materials or workmanship for a period of five (5) years will be given by Akron Brass Co. with respect to Akron Brass Co. products purchased and used in the United States and Canada respectively. WARRANTY - HEAVY DUTY VALVES - 10 YEARS Akron Brass warrants Heavy Duty Swing-Out Valves for a period of ten (10) years after purchase against defects in material or workmanship. Akron Brass will repair or replace any Heavy Duty Swing Out Valve which fails to satisfy this warranty. WARRANTY - SEATING - 5 YEARS HO Bostrom will warrant each new seat manufactured, to be free from defects in materials and workmanship when delivered to the original purchaser for a period of five (5) years. Labor to remove or reinstall and transportation of defective items will not be covered by, or any allowance made for said cost under this warranty. WARRANTY RELATED APPARATUS TRANSPORT - 2 YEARS Should any warranty repair require transportation of the apparatus to a repair facility outside the Department s city limits, the manufacturer will provide a pickup and delivery service for the first two (2) years of warranty coverage, at no charge to the Fire Department.

9 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS NEW PRODUCT WARRANTY (Domestic Fire Service Sales) Kovatch Mobile Equipment Corporation ("KME"), hereby warrants to the original purchaser (first end users) that any new products manufactured by KME shall be free from defects in material and workmanship under normal use, maintenance and service for a period of five (5) year from date of delivery, subject to the conditions and exceptions stated herein. Under this warranty, KME'S obligation is limited to the repair or replacement at KME'S option, at its factory, by its representative, or by its authorized service facility, of any part found to be defective by KME. If KME deems it necessary, all parts for which warranty claim is made, shall be returned to KME, transportation charges prepaid, for examination by KME who shall be the sole judge as to whether such part was defective in material or workmanship under normal use, maintenance or service. THIS WARRANTY DOES NOT APPLY TO: 1. Any product or component which has been subjected to misuse, neglect, alteration, accident or lack of normal maintenance, or which has been operated above factory rated capacity. 2. Routine maintenance items; such as filters, belts and lights, and routine maintenance service, such as normal lubrication or proper adjustments. 3. Components manufactured by others that are warranted by the manufactures thereof to the original purchaser; such as, engines, tires, rims, ignition apparatus, horn or other signal devices, generators, batteries, speedometers, and other trade accessories. THIS WARRANTY IS EXPRESSLY GRANTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. KME neither assumes nor authorizes any other person to make or assume for it any other obligation, liability or warranty or to make any other representation on its behalf in connection with the sale or use of the new product covered by this warranty. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

10 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL COOLING SYSTEM WARRANTY (Domestic Fire Service Sales) Kovatch Mobile Equipment (KME) warrants all Cooling System Equipment components used in the construction of KME Fire Apparatus against defects and workmanship provided the apparatus is used in a normal and reasonable manner. This warranty is extended only to the original user-purchaser for a period of three (3) years from the date of delivery / acceptance to the original user-purchaser, whichever occurs first. This warranty applies to both purchased and fabricated, manufacturer supplied, coolant system components, and is not provided in lieu of any Vendor provided warranties. All coolant system components provided by the engine manufacturer are covered by the engine manufacturer s warranty only. THIS WARRANTY IS EXPRESSLY GRANTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience KME neither assumes nor authorizes any other person to make or assume for it any other obligation, liability or warranty or to make any other representation on its behalf in connection with the sale or use of the new product covered by this warranty. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

11 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS FIVE (5) YEAR LETTERING WARRANTY (Domestic Fire Service Sales) Kovatch Mobile Equipment Corporation will provide a five (5) year warranty against defects in material and workmanship for all graphic processes. Any valid claims must be made in writing within 15 days of the determination of any defects to KME Fire Apparatus. KME Fire Apparatus will at its option make any necessary repairs either at a local authorized service center or at the factory, if required. KME Fire Apparatus will make the final decision as to where the repairs are to be made and any transportation cost are the owners responsibility, KME will at its option repair or replace any verified defects in workmanship or materials at no cost to the owner provided all the requirements of this warranty have been met. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. THE COMPANY MAKES NOT OTHER WARRANTY, EXPRESSED OF IMPLIED, AND SPECIFICALLY, DISCLAIMS ANY IMPLIED WARRANTY INCLUDING THE WARRANTY OF MERCHANTABILITY. KME continually strives to improve its products and therefore, reserves the right to make improvements or changes without incurring any obligations to make such changes or additions on equipment previously sold. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

12 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS NEW SHEET METAL BODY WARRANTY (Domestic Fire Service Sales) KME FIRE APPARATUS DIVISION of KOVATCH MOBILE EQUIPMENT CORP., ("KME") hereby warrants to the original purchaser (first end user) that any new fire apparatus body manufactured by KME shall be free from structural defects under normal use, maintenance, or service for a period of ten (10) years from date of delivery, subject to the conditions and exceptions stated herein. Under this warranty, KME'S obligation is limited to the repair or replacement at KME'S option, at its factory, by it's representative, or by its authorized service facility, of any structural part of the fire apparatus body found to be defective by KME. For purposes of this warranty, fire apparatus body is defined as all sheet metal and welds. THIS WARRANTY DOES NOT APPLY TO: 1. Hinges, door latches, bolt-on items or accessories or other items that are not an integral part of the body itself. 2. Any part or component which has been subjected to misuse, abuse, neglect, alteration, or lack of normal maintenance. 3. Components that may be manufactured by others and that are warranted by the manufacturers thereof to the original purchaser. THIS WARRANTY IS EXPRESSLY GRANTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. KME neither assumes nor authorizes any other person to make or assume for it any other obligation, liability or warranty or to make any other representation on its behalf in connection with the sale or use of the new product covered by this warranty. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period

13 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS NEW SHEET METAL CAB WARRANTY (Domestic Fire Service Sales) KME FIRE APPARATUS DIVISION of KOVATCH MOBILE EQUIPMENT CORP., ("KME") hereby warrants to the original purchaser (first end user) that any new fire apparatus cab manufactured by KME shall be free from structural defects under normal use, maintenance, or service for a period of ten (10) years from date of delivery, subject to the conditions and exceptions stated herein. Under this warranty, KME'S obligation is limited to the repair or replacement at KME'S option, at its factory, by it's representative, or by its authorized service facility, of any structural part of the fire apparatus cab found to be defective by KME. For purposes of this warranty, fire apparatus cab is defined as all sheet metal and welds. THIS WARRANTY DOES NOT APPLY TO: 1. Hinges, door latches, bolt-on items or accessories or other items that are not an integral part of the cab itself. 2. Any part or component which has been subjected to misuse, abuse, neglect, alteration, or lack of normal maintenance. 3. Components that may be manufactured by others and that are warranted by the manufacturers thereof to the original purchaser. 4. Cab components damaged as a result of corrosion, including but not limited to exposure to salt, acidic material, or other damaging chemicals. THIS WARRANTY IS EXPRESSLY GRANTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. KME neither assumes nor authorizes any other person to make or assume for it any other obligation, liability or warranty or to make any other representation on its behalf in connection with the sale or use of the new product covered by this warranty. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

14 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME Fire Apparatus 10 Year Corrosion Limited Warranty KME Fire Apparatus provides to the original owner a rustproofing warranty for a period of ten (10) years on new fire apparatus that is operated for non-commercial purposes, provided the owner to whom this warranty is issued follows the Customer Responsibilities set forth below. This warranty commences on the date of application of rustproofing material, and is non-transferable. The apparatus is warranted against rust perforation from the inside out (rust through) of any covered area(s). KME will at its discretion either (1) repair, or (2) replace the rusted through covered area(s). CUSTOMER RESPONSIBILITIES: 1. Inspections. Customer shall have the apparatus inspected once a year by an authorized KME service provider. Records of such inspections shall be kept and presented to KME upon demand. 2. Damage to Fire Truck. If the fire truck is involved in a collision or other incident that damages the rustproofing application, the owner must notify KME within thirty (30) days of such occurrence. If notice is not given, then this warranty shall automatically become null and void. If KME is notified as required, KME will inspect the vehicle, and if KME determines it necessary in order to continue this warranty, KME will perform either partial or complete reapplication of the rust preventative material at the then-current rates to be charged to the customer. 3. Rust-through Claims Procedure. In the event of rust through during the term of this warranty, the customer must notify KME within thirty (30) days of the first notice of rust. Conformance by the customer with the thirty (30) day notice requirement will be judged by KME on the basis of the extent of damage resulting from rust-through. If, in the opinion of KME, the rust-through is substantially larger than that which could have reasonably occurred within thirty (30) days of the first notice of rust-through, no such claim will be valid under this warranty. Further, in no event shall a claim be considered timely if made later than the last day of the term of this warranty. EXCLUSIONS: Service provided by KME or its authorized representative under this warranty does not include the following: A. Repair or replacement of exhaust systems, which are not covered. B. Repair or replacement of any parts damaged by rusting through, if such repair or replacement was performed before obtaining KME s authorization in writing. C. This warranty does not apply to exterior surface or cosmetic rust, rust caused by external damage from any cause, such as dents, scratches, chipped paint, etc. D. Repair or replacement of parts damaged by rusting through on any fire truck whose owner does not present us with copies of inspection records showing that all required inspections have been timely performed. E. Repair or replacement of parts damaged by rusting through if such parts were repaired or replaced because of rust damage and such parts were not treated with rust preventative compound within thirty (30) days of repair or replacement. F. This limited warranty applies only to exterior body and cab paint. Paint on the vehicle s undercarriage, cab and body interior is warranted only under the KME proposed general warranty. G. Those areas within the vehicle that are foam or caulk filled. DISCLAIMER OF IMPLIED WARRANTIES: THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Some states do not allow disclaimers of or limitations on duration of implied warranties, so these limitations may not apply to you. INCIDENTAL AND CONSEQUENTIAL DAMAGES EXCLUDED: The customer shall not be entitled to recover from KME, its successors or assigns, any consequential damages to property, damages for loss of use, loss of time, loss of profits or income, or any other incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

15 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS/PPG 10-YEAR PAINT WARRANTY COMMERCIAL FLEET WARRANTY PPG Fleet Finishes provides a PPG 10 Year Paint Performance Guarantee, backed by superior DELTA DELFLEET, DURETHANE, and specific related products. PPG Fleet Finishes guarantees to the original owner of the vehicle the durability of any paint work performed to PPG certification standards for a period of ten (10) years. TERMS & CONDITIONS The KME/PPG 10 Year Paint Performance Guarantee covers the areas of the vehicle finished with specified products for a period of ten (10) years beginning the day the vehicle was delivered from the PPG Certified Original Equipment Manufacturer to the original vehicle owner. The finished areas, as outlined on this Warranty Certificate, are covered for the following paint failures: Guarantee Inclusions: Peeling or delamination of the topcoat and/or other layers of paint Cracking or checking Loss of gloss caused by cracking, checking and hazing Any paint failure caused by defective PPG Fleet Finishes which are covered by this guarantee Guarantee Exclusions: Paint deterioration caused by blisters or other film degradation due to rust or corrosion originating from the substrate Hazing, chalking or loss of gloss caused by improper care, abrasive polishes, cleaning agents, heavy duty pressure washing, or aggressive mechanical wash systems Paint deterioration caused by abuse, accidents, acid rain, chemical fallout or acts of nature Custom finishes, exotic finishes, or any finishes other than standard finishes and procedures Finishes on vehicles used for competitive purposes Failures resulting from product misuse or abuse Repairs done over previously refinished areas unless stripped to bare metal or appropriate substrate Claims presented without proper guarantee documentation Failure on finishes containing Non-PPG Finishes approved products Failure on finishes performed by Non-PPG Certified Refinish Technicians Failure on finishes performed by Non-PPG Certified Repair Centers Failure on finishes performed by PPG Certified Refinisher who have allowed their certification to expire

16 These are the only guarantees (warranties) that PPG makes, and all other expressed or implied warranties, including without limitation, any warranty of fitness for particular purpose or use, are disclaimed by PPG. This program contains the exclusive remedies with respect to any failure of the products to conform to the warranties given above or as to any injury or damage arising from any nonconforming products. In no event shall PPG be liable under any theory of recovery, whether based on negligence of any kind, contract, strict liability or tort, for any indirect, special, incidental or consequential damage, in any way related to, arising or resulting from the purchase of use of the products. Owner Responsibilities: The owner must have yearly inspections of the paint that is covered by this warranty performed by a qualified KME or PPG representative. Records of such inspections shall be maintained by the owner and presented to KME upon request. Failure to have required annual inspections will void the warranty. The owner must notify KME of any paint defects within five (5) business days of discovery. The owner must schedule a KME /PPG representative to inspect the defect within ten (10) business days after discovery. Once the defect has been identified and approved for warranty repair by the KME/PPG representative, the vehicle owner has fourteen (14) working days to schedule the repair. All costs related to annual inspections and defect inspections, including transportation, are the owner s sole responsibility. All transportation for warranty repairs is the sole responsibility of the owner. Other Exclusions: This warranty is specific to the cab and body finish. The underside of the cab and body, any ladder and ladder components, framework and chassis are not covered by this paint warranty. Vendor-supplied or up-fitted items, including, but not limited to, A/C roof condensers, lighting, generators, plumbing fixtures, ladder racks, etc., are not covered. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

17 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS 10-STAINLESS STEEL PLUMBING WARRANTY (Domestic Fire Service Sales) Kovatch Mobile Equipment (KME) warrants all KME manufactured stainless steel plumbing components used in the construction of KME Fire Apparatus water/foam plumbing systems against defects and workmanship provided the apparatus is used in a normal and reasonable manner. This warranty is extended only to the original user-purchaser for a period of ten years from the date of delivery. THIS WARRANTY IS EXPRESSLY GRANTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. KME neither assumes nor authorizes any other person to make or assume for it any other obligation, liability or warranty or to make any other representation on its behalf in connection with the sale or use of the new product covered by this warranty. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

18 One Industrial Complex Nesquehoning, PA (800) [Phone] (570) [Fax] URL KME FIRE APPARATUS AERIAL WATERWAY WARRANTY (Domestic Fire Service Sales) KME FIRE APPARATUS DIVISION of KOVATCH MOBILE EQUIPMENT CORP., ("KME") hereby warrants to the original purchaser (first end user) that any new fire apparatus aerial waterway manufactured by KME shall be free from structural defects under normal use, maintenance, or service for a period of ten (10) years from date of delivery, subject to the conditions and exceptions stated herein. Under this warranty, KME'S obligation is limited to the repair or replacement at KME'S option, at its factory, by it's representative, or by its authorized service facility, of any structural or sealing of the fire apparatus waterway found to be defective by KME. THIS WARRANTY DOES NOT APPLY TO: 1. Bent or damaged waterway tubes from misuse. 2. Worn or damaged waterway tubes from lack of maintenance. 3. Damaged seals or waterway tubes due to over pressurization or pressure spikes. 4. Damaged or worn seals due to misuse or lack of maintenance. 5. Any part or component which has been subjected to misuse, abuse, neglect, alteration, or lack of normal maintenance. 6. Components that may be manufactured by others and that are warranted by the manufacturers thereof to the original purchaser. THIS WARRANTY IS EXPRESSLY GRANTED IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. KME shall not be liable to the original purchaser or anyone else for consequential, incidental, special or direct damages, including, but not limited to, any claims for loss of profits, down time, loss of use or inconvenience. KME neither assumes nor authorizes any other person to make or assume for it any other obligation, liability or warranty or to make any other representation on its behalf in connection with the sale or use of the new product covered by this warranty. GSO# Vin.#

19 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS CHASSIS LIFETIME FRAME WARRANTY (Domestic Fire Service Sales) KOVATCH MOBILE EQUIPMENT CORP. warrants to the original purchaser of a KME chassis that the frame and frame cross members are free of defects in material and workmanship for the lifetime of the vehicle, provided that the chassis is used in a normal and reasonable manner. KOVATCH MOBILE EQUIPMENT CORP'S obligation under this warranty is strictly limited to repairing or replacing, as KOVATCH MOBILE EQUIPMENT CORP. may elect, any part or parts of such frame or frame members which KOVATCH MOBILE EQUIPMENT CORP'S examination discloses to be defective in material or workmanship. Any part or parts considered to be covered by the conditions of this warranty shall be returned, freight prepaid, to the Company's factory at Nesquehoning, Pennsylvania. This warranty shall be null and void if the frame shows evidence of alterations, cutting, splicing, welding or drilling of rails or flanges without the written authorization of KOVATCH MOBILE EQUIPMENT CORP. Further, this warranty shall be void if the vehicle is involved in an accident, shows signs of abuse or evidence of being operated in a manner, or for a purpose, not recommended by KOVATCH MOBILE EQUIPMENT CORP. Chassis frame components damaged as a result of corrosion, including but not limited to exposure to salt, acidic material, or other damaging chemicals are not covered under this warranty. Nothing contained in this warranty shall make KOVATCH MOBILE EQUIPMENT CORP. liable beyond the express limitations hereof, for loss, injury or damage of any kind to any person or entity resulting from any defect or failure in the chassis or frame. To the extent permitted by law, THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. To the extent permitted by law, this warranty is also in lieu of all other obligations or liabilities on the part of KOVATCH MOBILE EQUIPMENT CORP., or the Seller, including liability for incidental and consequential damages. KOVATCH MOBILE EQUIPMENT CORP. makes no representation that the chassis or frame has the capacity to perform any functions other than as contained in the Company's written literature, catalogs or specification accompanying delivery of the chassis.

20 No person or affiliated company representative is authorized to give any other warranties or to assume any other liability on behalf of KOVATCH MOBILE EQUIPMENT CORP. in connection with the sale, servicing or repair of any KME Chassis. KOVATCH MOBILE EQUIPMENT CORP. reserves the right to make design changes or improvements in its products without imposing any obligation upon itself to change or improve previously manufactured products. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

21 One Industrial Complex Nesquehoning, PA (800) [Phone] - (570) [Fax] URL KME FIRE APPARATUS - AERIAL DEVICE TWENTY (20) YEAR STRUCTURAL WARRANTY (Domestic Fire Service) l. LIMITED WARRANTY. Except as provided below, for a period beginning on the date of acceptance by the original purchaser/first end user ( Buyer ) and ending on the first to occur of the expiration of twenty (20) years or 100,000 miles of use KME Fire Apparatus warrants to the first end user that each new Aerial Device of its manufacture which is installed on its Fire and Rescue Apparatus vehicles shall be free of defects in materials and workmanship. This warranty shall apply to all structural load-supporting elements of the Aerial Device that are made of ductile material, as identified in the KME Fire Apparatus specifications for the Aerial Device. This warranty shall be void if, or to the extent that, the Aerial Device is not maintained in strict compliance with NFPA Standard 1911 in effect at time of sale, and including such periodic inspections and testing by qualified third parties as are required by that Standard as it may be in effect from time to time. Proof of such compliance shall accompany any claims under this warranty. Identification of third-party testing agencies known to KME Fire Apparatus to be qualified for such purposes may be obtained from the KME Customer Service Department. This limited warranty shall apply only if the Aerial Device is properly maintained and used in service which is normal to the particular vehicle on which it is installed. Normal service means service which does not subject the Aerial Device or vehicle to stresses or impacts greater than those that normally result from the careful use of the Aerial Device or vehicle. If the Buyer discovers a defect or nonconformity, it must notify KME Fire Apparatus in writing within thirty (30) days after the date of discovery. This limited warranty is not transferable by the first end user. KME Fire Apparatus makes no warranty whatsoever as to: (1) Integral parts, components, attachments or trade accessories not manufactured by KME Fire Apparatus, but instead, the applicable warranties, if any, of the respective manufacturers thereof shall apply; (2) Any Aerial Device, or component, part, attachment or accessory damaged by misuse, neglect or accident; (3) Any vehicle chassis or component, part, attachment or accessory that shall have been repaired, altered or assembled in any way by others than KME which, in the sole judgment of KME Fire Apparatus, affects the performance, integrity, stability or purpose for which it was manufactured; or (4) Products or parts which are not defective but which may wear out and have to be replaced during the warranty period, including, but not limited to, hoses, fluids, gaskets and light bulbs. KME Fire Apparatus assumes no responsibility for the assembly of its parts or sub-assemblies into finished products unless such assembly is performed by KME Fire Apparatus. 2. DISCLAIMERS OF WARRANTIES. THE WARRANTIES SET FORTH IN PARAGRAPH 1 ARE THE EXCLUSIVE WARRANTIES GIVEN BY KME FIRE APPARATUS. KME FIRE APPARATUS HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTIES OTHERWISE ARISING FROM COURSE OF DEALING OR USAGE OF TRADE, EXCEPT AS PROHIBITED BY LAW.

22 3. BUYER S REMEDIES. If the product fails to conform to the warranties as set forth in paragraph 1 and such nonconformity is not due to accident, misuse, improper maintenance, or other cause excluded under paragraph 1, Buyer shall notify KME Fire Apparatus as provided in paragraph 1, and shall make the product available for inspection by KME Fire Apparatus or its designated agent. At the request of KME Fire Apparatus, any defective part shall be returned to KME Fire Apparatus for examination, with transportation charges prepaid and assumed by shipper. Within a reasonable time after receipt, KME Fire Apparatus shall provide, at its option, with regard to a covered warranty claim, repair or replacement of any nonconforming or defective parts. Repair or replacement shall be made only by a facility approved in advance by KME Fire Apparatus. THIS REMEDY SHALL BE THE EXCLUSIVE AND SOLE REMEDY FOR ANY BREACH OF WARRANTY. 4. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. EXCEPT AS REQUIRED BY LAW, IN NO EVENT SHALL KME FIRE APPARATUS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM NON-DELIVERY OR FROM THE USE, MISUSE OR INABILITY TO USE THE PRODUCT OR FROM DEFECTS IN THE PRODUCT OR FROM THE NEGLIGENCE OF KME FIRE APPARATUS OR FROM TORT. This exclusion applies regardless of whether such damages are sought for breach of warranty, breach of contract, negligence or strict liability in tort or under any other legal theory. Note: Surety Bond, if a part of the sale of the vehicle to which this limited warranty is provided, applies only to the Basic One-Year Warranty for such vehicle, and not to any other warranty, extended or otherwise, made by KME Fire Apparatus or any KME Fire Apparatus Supplier. KME continually strives to improve its products and, therefore, reserves the right to make improvements or changes without incurring any obligations to make such changes or additions on equipment previously sold. Legal Remedies: Any claim or controversy arising out of or relating to this limited warranty, or beach thereof, shall be settled by arbitration administered by the American Arbitration Association in Milwaukee, Wisconsin in accordance with the Commercial Arbitration Rules of the American Arbitration Association. The laws of the State of Wisconsin shall be applied in any arbitration proceedings, without regard to principles of conflict of law. Each party shall bear its own costs, fees and expenses of arbitration. The arbitrator(s) determination and the basis for that determination shall be in writing and shall include an explanation of the basis for the determination. The determination of the arbitrator(s) shall be final and binding and judgment upon such determination may be entered in any court having jurisdiction. The arbitration proceedings and arbitration award shall be maintained by the parties as strictly confidential, except as otherwise required by court order or as is necessary to confirm, vacate, or enforce the award and for disclosure in confidence to the parties respective attorneys, tax advisors, or senior management personnel. Furthermore, any action for breach of warranty must be commenced within three months following the expiration of the warranty period.

23

24

25 HEAVY SERVICE WARRANTY INFORMATION Heavy Service Vehicles Airport Rescue Fire (ARF) Airport Shuttle Asphalt Truck Block Truck Bottom Dump Trailer Combination Cementing Vehicle City Bus Commercial Pick-Up Concrete Pumper Construction Material Hauler Crash Fire Rescue (CFR) Mixer Demolition Drill Rig Dump Emergency Service Equipment Hauling Flatbed Trailer Hauler Flatbed Truck Fracturing Truck Front Loader Geophysical Exploration Hopper Trailer Combinations Landscaping Truck Liquid Waste Hauler Log Hauling Lowboy Michigan Special Gravel Trains Michigan Special Log Hauler Michigan Special Steel Hauler Michigan Special Waste Vehicle Municipal Dump Rapid Intervention Vehicle (RIV) Rear Loader (Refuse) Recycling Truck Residential Pick-Up (Refuse) Rigging Truck Roll-Off Scrap Truck Semi-End Dump Sewer/Septic Vacuum Shuttle Bus Side Loader Snowplow/Snowblower Steel Hauling Tanker Tank Truck Tractors with Pole Trailers Tractor/Trailer with Jeeps Transfer Dump Transfer Vehicle Transit Bus Trolley Utility Truck Winch Truck Heavy Service Typically Is Moderate mileage operation (less than 60,000 miles per year) On/Off road vocations (10% or more off-road) Moderate to frequent stops/starts (up to 10 stops per mile) Front Drive/Non-Drive Steer Axles 2/Unl/P&L FD-965 FF-941 FF-942 FF-943 FF-944 FF-946 FF-961 FF-966 FF-967 FG-941 FG-943 FH-941 FH-946 FL-941 FL-943 MFS-6-151A-N MFS-6-153B MFS-6-162B MFS-6-162C MFS-7-113C-N MFS-7-153C-N MFS-7-163C-N MFS-8-113B-N MFS-8-153B-N MFS-8-163B-N MFS A MFS A-N Coverage under Meritor s warranty requires that the application of products be properly approved pursuant to OEM and Meritor approvals. Refer to TP-9441 for axles, SP-8320 for trailer axles, TP for drivelines, and/ or contact Meritor regarding specific application approval questions on any product line. MFS A-N MFS MFS-12E-122 MFS A-N MFS A-N MFS MFS MFS A-N MFS A-N MFS MFS MFS A-N MFS A-N MFS A-N MFS A-N MFS A-N RF RF MX MX MX MX MX MX MX MX MX MX MX Drivelines 1/Unl/P&L RPL 92N MXL Rear Drive Single Axles 2/Unl/P&L MS-17-14X RS /145/A MS-19-14X RS MS MS-21-14X RS RS /A RS RC RC RH RS RC RS RS /380 RC RC RS RS MS MS SP RS /380 MS MS SP RS /380 MS RS RC RC MT MT SP

26 HEAVY SERVICE WARRANTY INFORMATION Rear Drive Tandem/Tridem Axles 2/Unl/P&L MT-34-14X/P RT /P/A MT-40-14X/P RT /A MT-44-14X/P RT /P RT MT MT SP RT /380 1,2 MT MT SP RT /380 1,2 RT MT RZ-166 RZ Axle model designated will vary according to options and variations specified on these axles. Contact Meritor Axle Applications Engineering for details. 2 Each vehicle must have a Request for Application Recommendation (RAR) approved by Meritor prior to vehicle build. All RARs must identify the chassis number or VIN. Refer to Product Information Letter #303 and #396 for further details. Brake Components Rear Drive Tandem 3/Unl/P&L Trailer Air Suspension Systems Cam P 3/Unl/P Cam P 3 2/100/P Cam Cast Plus 2/100/P&L Q+ Drum Brake 3/Unl/P&L Q+ Drum Brake 2 2/100/P&L ASA 3/Unl/P ASA 2 2/100/P Hubs/Cast Drums and Other Wheel-end Components 1/Unl/P Hydraulic Disc Brakes 1/Unl/P All Other Brakes 1/Unl/P EX+ Air Disc Brake 2/100/P&L 1 Based on stamped wear diameter max. 2 Applies to City Bus, Trolley, Shuttle Bus and Airport Shuttle only. 3 Warranty for all non-meritor ASAs supplied by Meritor for all Heavy Service vocations is 1/100/P. Transfer Cases 1/Unl/P MTC-4208 MTC-4210 MTC-4213 T-2111 T-2119 T-2120 RT /P/A 3 RT /P/A 1,3 RT EH/P/A 2,3 RT /P/A 3 1 U.S. only. Canadian warranty = 1/Unl/P for combination vehicles only. 2 Axle model designated will vary according to options and variations specified on these axles. Contact Meritor Axle Applications Engineering for details. 3 Each vehicle must have a Request for Application Recommendation (RAR) approved by Meritor prior to vehicle build. All RARs must identify the chassis number or VIN. Refer to Product Information Letter #303 and #396 for further details. Meritor Tire Inflation System by PSI MTIS Components 3/500/P&L MTA (Trailing Arm) Major Structural Components 1 5/Unl/P, 1/Unl/L Height Control Valve 1/Unl/P&L Shock Absorbers 2/Unl/P&L Air Springs 2/Unl/P, 1/Unl/L Bushings 1 5/Unl/P, 3/Unl/L 1 Raw wood applications 3/Unl/P, 1/Unl/L (For axle and ABS coverage, refer to appropriate product warranties.) Center Non-drive Axles 2/Unl/P&L MC Trailer Axles Beam and Brackets 1 5/Unl/P, 1/Unl/L Wheel End Systems 2 Standard System 3 1/Unl/P&L Series is 3/Unl/P, 1/Unl/L. 2 Includes hub, wheel seals and wheel bearings all systems require annual inspections and proper documentation to ensure full coverage. 3 When installed by Meritor. (For brake components and ABS coverage, refer to appropriate product warranties.) 9

27 TERMS AND CONDITIONS Coverage Exclusions Product Description All The cost of any repairs, replacements or adjustments to a covered component (1) associated with noise; (2) resulting from the use or installation of non-genuine Meritor components or materials; (3) due to vibration associated with improper operation or misapplication of drivetrain components; and (4) damage resulting from corrosion. Front Axles King Pin Bushings. Rear Axles Self-contained traction equalizers and oil filters. The use of NoSPIN differentials will result in the exclusion of axle shafts from warranty considerations. NoSPIN is a product of Eaton. ASA Boot and bushing. Bent, broken, over-torqued, missing or otherwise damaged pawl assemblies. Cam Brake Brake lining wear and brake shoe rust-jacking. Disc Brake Pad wear, rotor wear. Coverage Limitations Product Description All Any claim beyond 60 days from date of repair will not be accepted or honored under this warranty program. Products purchased on an incomplete vehicle (glider) are limited to one year, unlimited miles parts only (1/Unl/P). Front Axles Tie rod and tie rod ends limited to 3-year/300,000-mile or published vocational coverage, whichever is less. Wheel seals, gaskets and wheel bearings are covered for 1 year/unlimited miles if the wheel end equipment is supplied and assembled by Meritor. Rear Axles Pinion and through shaft seals limited to 3-year/300,000-mile or published vocational coverage, whichever is less, if yoke is installed by Meritor. If yoke is not installed by Meritor, then Meritor does not warrant pinion seals. Wheel seals, gaskets and wheel bearings are covered for 1 year/unlimited miles if the wheel end equipment is supplied and assembled by Meritor. Rear Axles The Meritor breather part number A-2297-C-8765 with A-3196-J-1336 hose must be used for eligibility of any potential warranty consideration relating to contamination and/or loss of lube in axles. Cam Brake Limited to bracket, brake spider and camshaft structural integrity. STEELite X30 Wearable life is up to the discard diameter of the drum. Disc Brake Warranty coverage for boots, seals, bushings and pins is 2/200/P. Warranty coverage for pads is 1/100/P. Warranty coverage on vehicles with 1,850 lb-ft engine torque and over may be reduced on individual drivetrain components. Contact your Meritor representative for specific details. 11

28 TERMS AND CONDITIONS (1) What is Covered by this Commercial Warranty? Meritor Inc. warrants to the owner ( Owner ) that the components listed in this publication, which have been installed by an Original Equipment Manufacturer ( OEM ) as original equipment in vehicles licensed for on-highway use, will be free from defects in material and workmanship. This warranty coverage begins only after the expiration of the OEM s vehicle warranty for the applicable covered components. Warranty coverage ends at the expiration of the applicable time period from the date of vehicle purchase by the first Owner, or, the applicable mileage limitation, whichever occurs first. Duration of coverage varies by component and vocation as detailed elsewhere in this warranty statement. Some components are warranted for parts only and the Owner must pay any labor costs associated with the repair or replacement of the component. Other components are warranted for both parts and reasonable labor to repair or replace the subject component. Components (whether new, used or remanufactured) installed as replacements under this warranty are warranted only for the remainder of the original period of time or mileage under the original warranty. For certain components, coverage requires the use of specific extended drain interval or synthetic lubricants. For further information about lubrication and maintenance, see Meritor publication Maintenance Manual Number l and the applicable Meritor maintenance manual for the product in question. Other conditions and limitations applicable to this warranty are detailed below. (2) Designation of Vocational Use Required. To obtain warranty coverage, each Owner must notify Meritor through the OEM new truck and/or trailer dealer of the intended vocational use of the vehicle into which the Meritor components have been incorporated prior to the vehicle in-service date. This notification may be accomplished by registering the vehicle through your OEM new truck and/or trailer dealer or with Meritor directly. Failure to notify Meritor of (I) the intended vocational use of the vehicle or (II) a change in vocational use from that which was originally designated, will result in the application of a one year, unlimited mileage, parts only warranty (1/Unl/P) from the initial in-service date. A second Owner and each subsequent Owner must also notify Meritor as to the intended vocational use of the vehicle. This notification can be sent directly to Meritor or through the OEM new truck and/or trailer dealer. The duration and mileage coverage of this warranty cannot exceed the coverage extended to the first Owner after his or her initial designation of vocational use. Coverage under Meritor s warranty requires that the application of products be properly approved pursuant to OEM and Meritor approvals. Refer to TP-9441 for axles, SP-8320 for trailer axles, TP for drivelines, and/or contact Meritor regarding specific application approval questions on any product line. (3) What is the Cost of this Warranty? There is no charge to the Owner for this warranty. (4) What is not Covered by this Warranty? This warranty does not cover normal wear and tear; nor does it cover a component that fails, malfunctions or is damaged as a result of (I) improper installation, adjustment, repair or modification (including the use of unauthorized attachments or changes or modification in the vehicle s configuration, usage, or vocation from that which was originally approved by Meritor), (II) accident, natural disaster, abuse, or improper use (including loading beyond the specified maximum vehicle weight or altering engine power settings to exceed the axle and/or driveline capacity), or (III) improper or insufficient maintenance (including deviation from approved lubricants, change intervals, or lube levels). This warranty does not cover any component or part that is not sold by Meritor. For vehicles that operate full or part time outside of the United States and Canada, a one year, unlimited mileage, parts only warranty (1/Unl/P) will apply. (5) Remedy. The exclusive remedy under this warranty shall be the repair or replacement of the defective component at Meritor s option. Meritor reserves the right to require that all applicable failed materials are available and/or returned to Meritor for review and evaluation. (6) Disclaimer of Warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESSED, IMPLIED OR STATUTORY INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. (7) Limitation of Remedies. In no event shall Meritor be liable for special, incidental, indirect, or consequential damages of any kind or under any legal theory, including, but not limited to, towing, downtime, lost productivity, cargo damage, taxes, or any other losses or costs resulting from a defective covered component. (8) To Obtain Service. If the Owner discovers within the applicable coverage period a defect in material or workmanship, the Owner must promptly give notice to either Meritor or the dealer from which the vehicle was purchased. To obtain service, the vehicle must be taken to any participating OEM new truck and/or trailer dealer or authorized Meritor service location. The dealer will inspect the vehicle and contact Meritor for an evaluation of the claim. When authorized by Meritor, the dealer will repair or replace during the term of this warranty any defective Meritor component covered by this warranty. (9) Entire Agreement. This is the entire agreement between Meritor and the Owner about warranty and no Meritor employee or dealer is authorized to make any additional warranty on behalf of Meritor. This agreement allocates the responsibilities for component failure between Meritor and the Owner. Vehicle models, brands and names depicted herein are the property of their respective owners, and are not in any way associated with Meritor, Inc., or its affiliates. Meritor Heavy Vehicle Systems, LLC 2135 West Maple Road Troy, Michigan USA For more information: call Ontrac at or visit meritor.com 2015 Meritor, Inc. Litho in USA, SP Revised (47865/11900)

29

30 Cummins Inc. Box 3005 Columbus, IN U.S.A. Bulletin Printed in U.S.A. Rev. 7/ Cummins Inc.

31 MANUFACTURER S 5-YEAR LIMITED WARRANTY Smart Power Systems (Seller) warrants to the original BUYER (whether it be an OEM, dealer, re-seller, or end-user) the following warranty covering the Smart Power hydraulic generator system manufactured by Smart Power and supplied by Smart Power. A Smart Power generator system, covered under this warranty, consists of the generator tray assembly and it components, the Command and Control Center digital meter panel display, and the hydraulic drive pump supplied by Smart Power to the installer. Smart Power warrants that the generator system will be free from defects in materials and workmanship provided such goods are operated and maintained in accordance with SPS s written instructions for a period of five (5) years OR 1000 hours from the date the product is placed in service (not to exceed 30 calendar days after the apparatus on which the generator has been delivered to the end-user if applicable), OR five and one-half (5-1/2) years from the date of shipment by Smart Power to the installer, OR 1000 hours of product use, whichever comes first. There is no other express warranty. Implied warranties, including merchantability and fitness for a particular purpose, are limited to periods of warranty as set forth above. In no event is Smart Power liable for incidental or consequential damages. Any and all implied warranties are excluded. Only components supplied by Smart Power are covered under this warranty. Repair or replacement parts are warranted for ninety (90) days from date of purchase, excluding labor and travel expenses. Any part repaired or replaced during the warranty period assumes the remainder of the warranty or ninety (90) days, whichever is greater. The end-user must complete and return to Smart Power the Smart Power warranty registration card provided with the generator set at time of delivery. The Buyer (OEM, dealer, reseller, end-user) must notify Smart Power, an authorized dealer, or a designated Smart Power representative, in writing, within fifteen (15) calendar days after the goods or parts fail to meet this warranty, or a defect is discovered. When requested in writing by Smart Power, defective products must be returned promptly to Smart Power. Smart Power s sole liability shall be limited to the repair or replacement of the product, including parts and labor, at Smart Power s option, of the parts that do not conform to this warranty. A Returned Material Authorization (RMA) is required for all products and parts and may be requested by phone, fax, , or mail. Failure to make timely delivery to the Seller of the product claimed to be defective shall void any warranty. Unless previous written agreements have been made between the Buyer and the Seller, the Buyer shall be responsible for all freight and shipping charges in connection with delivery of the product claimed to be defective to Seller at its manufacturing facility, and the delivery of repaired or replacement product or parts to the Buyer. Product claimed to be defective must be shipped by end-user freight prepaid. Returned or replaced product and/or parts will be shipped Buyer freight collect. If the Product is repaired under warranty, the associated freight charges will be reimbursed to the Buyer NORTH US-131, REED CITY, MICHIGAN Fax

32 If Smart Power ultimately determines that no warranty coverage is available for a product claimed to be defective, whether determination is based on the warranty being voided, the product failure being due to a cause not covered by the warranty, the failure to make a timely and proper warranty claim, or otherwise, the Buyer shall have the option of either (i) having the product returned to it freight collect, without repair or replacement, or (ii) if Seller determines that the product is repairable, provide costs of repair to buyer, buyer authorizing to have the product repaired by Seller upon receipt of purchase or returned to Buyer freight collect. Owner s responsibilities: The owner is obligated to operate and maintain the generator in accordance with the recommendations published by SPS in the owner s manual. The owner is responsible for the costs associated with such maintenance and any adjustments that may be required. This warranty excludes any responsibility or liability of Smart Power for: 1. Damages or defects caused by normal wear, accident, misuse, abuse, abnormal operating conditions, negligence, corrosion, accident causes, or attributable to written specifications or instructions furnished by the installer; 2. Product that is not properly maintained in accordance with the Seller s product manuals and operating instructions guidelines; 3. Damages caused by operator error; 4. Damages or defects caused by improper installation; 5. Damages or defects caused by inadequate water drainage provided by the installer in the area where the genset is installed or stored; 6. Damages or defects caused by inadequate air flow space or ventilation provided by the installer in the area where the genset is installed; 7. Any product or part altered or modified by the installer or service facility without written prior consent by Smart Power; 8. Cost of normal maintenance, adjustments, installation or start-up; 9. Normal wear items and components needing periodic maintenance such a rubber hoses and filters. 10. Excessive labor due to components being concealed in vehicle as a result of installation 11. Water, road debris, excessive dirt, salt, abrasive particles, or large foreign objects found in the generator NORTH US-131, REED CITY, MICHIGAN Fax

33 THERE IS NO OTHER EXPRESSED WARRANTY. IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO PERIODS OF WARRANTY SET FORTH ABOVE. TO THE EXTENT PERMITTED BY LAW, ANY AND ALL IMPLIED WARRANTIES ARE EXCLUDED. NOTE: Some states and provinces do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. IN NO EVENT IS SPS LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. NOTE: Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that may vary from state to state or province. No person is authorized to give any other warranties or to assume any other liabilities on SPS s behalf, unless made or assumed in writing by an officer of SPS, and no person is authorized to give any warranties or assume any other liability on behalf of seller unless made or assumed in writing by seller. Contact your SPS distributor for questions regarding your warranty rights and responsibilities at (231) ; or visit our website at NOTE: This warranty DOES NOT cover the XRT rescue tool pump, and its components or the rescue tools. Reference XRT manual for rescue tool pump warranty NORTH US-131, REED CITY, MICHIGAN Fax

34 Warranty Registration Hydraulic Generator In Service Date: Generator Model: Pump Serial Number: (Located under vehicle, on or near PTO) Truck Purchased From: (Apparatus Mfg.) Apparatus Manufacturer s Shop Order Number: (If applicable) End User / Department Address: City State: Zip: Contact Person: Phone: Return this card by one of the following methods: sales@smartpower.com Fax: (231) Submit on line at Mail: Smart Power Systems, 5000 North US 131, Reed City MI Proud of your new truck? Please send us pictures of your new truck with our generator installation and we will post them on the web. Your generator comes with a manufacturer s 5-year limited warranty SPS Warranty 1 from the date the product is first placed into service, or five and one-half (5 ½) years from the date of shipment by Smart Power to original purchaser, whichever period shall be the first to expire. In service date will not exceed 30 days after delivery to end user. Demo truck warranty begins at the time truck in titled. Please refer to your owner s manual for a description of coverage. WARNING: THE COMPLETED WARRANTY REGRISTRATION CARD IS REQUIRED FOR THE PERFORMANCE OF ANY WARRANTY SERVICE. PLEASE RETURN THE CARD WITHIN 30 CALENDAR DAYS AFTER DELIVERY OF APPARATUS TO END USER TO ENSURE THAT YOUR SERVICE IS NOT DENIED OR DELAYED PENDING PROOF OF PURCHASE INFORMATION VERIFICATION. SPS Warranty NORTH US-131, REED CITY, MICHIGAN Phone: (231) Fax: (231)

35 USSC LLC Valor Fire Seating Six Year Limited Warranty WARRANTY: USSC warrants to the original buyer that its Driver Seats are free from defects in material and workmanship for the following components: Metal Components Six (6) years Plastic Components Three (3) years Moving Components Three (3) years Upholstered Components One (1) year Warranty period begins at time of installation. Each seat will be numbered (serialized) for identification. This number must be presented with any warranty claim. NON-PRORATED REPLACEMENT: In the event that a warranty-covered failure should occur within the warranty period, USSC will repair or replace the seat without charge and without prorating, at USSC's option. This is the sole and exclusive remedy for breach of any warranty. Any replacement seat or part is only covered by this warranty for the remainder of warranty period applicable to the original seat. EXCLUSIONS: This warranty specifically excludes foam, upholstery material, belts, and items exposed to normal wear and tear such as metal\ finish and paint and does not apply to any seat that is damaged as result of accident, improper installation, intentional damage, abuse, vandalism, negligence, misuse, improper operating conditions, or extreme natural phenomena. No removal or re-installation labor will be paid for. This warranty is provided directly to the purchaser only and does not extend to any subsequent party and is solely for the USSC product as it is originally manufactured. INCIDENTAL, CONSEQUENTIAL DAMAGES, & LIMITATIONS: This warranty shall be in lieu of any other warranty, expressed warranty, expressed or implied, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. The purchaser s sole and exclusive remedy against USSC shall be for the repair and replacement of the defective product as provided herein. No other remedy; including but not limited to incidental or consequential damages for lost profits, lost sales, injury to person or property, shipping, freight, installation, removal, or any other incidental or consequential loss shall be available to the purchaser. NOTIFICATION: All reports, claims, or notices required by the warranty to be provided to USSC must be in writing and delivered to: Attention USSC Warranty Claim Department, 150 Gordon Drive, Exton, PA Repairs being claimed for warranty must be sent to USSC for prior approval and warranty acceptance before any warranty claims can be made. Parts being claimed for warranty must be sent to USSC for prior approval and warranty acceptance before any warranty claims can be made. INSPECTION AND VERIFICATION: The owner must provide access to the failed seat so that USSC's authorized representative can perform an on-site inspection. Alternatively, USSC may ask the owner to ship the failed seat to USSC's laboratory for inspection. Within 30 days of the inspection, either on-site or in the laboratory, USSC will render an opinion as to whether or not the claimed failure is covered by the warranty. GENERAL MAINTENANCE: USSC provides the proper maintenance instructions, as well as recommended service intervals with each seat. Warranty is contingent upon documented performance of recommended maintenance and service. All replacement parts should be recommended or authorized USSC components. Failure to purchase proper components will null and void the warranty. DESIGN: USSC reserves the right to modify parts and design specifications without notice as long as the seats meet general specifications, unless otherwise committed per contract. In case further non-conforming changes have to be incorporated, USSC will submit such changes to customer for prior approval.

36

37

38

39

40

41

42

43

44

45

46

47 E f f e c t i v e 1 A u g u s t, UNITED PLASTIC FABRICATING, INC. WARRANTY FOR: POLY-TANK, POLYSIDE, INTEGRATOR, ELLIPSE, ELLIP-T-TANK & DEFENDER LIFETIME SERVICE WARRANTY United Plastic Fabricating, Inc. (hereinafter called UPF ) warrants each POLY-TANK, Booster/Foam Tank POLYSIDE Wetside Tank, Integrator Tank/Body, ELLIPSE Elliptical Tank, Ellip-T-Tank Tank and DEFENDER Skid Tank to be free from defects in material and workmanship for the service life of the original vehicle (vehicle must be actively used in an emergency response for fire suppression). All UPF Tanks must be installed and operated in accordance with the UPF Installation and Operating Guidelines. Failure to do so can void the warranty. Every UPF Tank is inspected and tested before leaving our facility. Should your UPF Tank require service, please notify UPF via , fax, in writing or by calling UPF at Please provide the serial number, a description of the service request, the location along with the phone number and name of the contact person. Our goal is to have scheduled work completed within a reasonable time period. Under a valid warranty claim, UPF will cover the cost to repair the UPF Tank including the customary and reasonable costs to make the tank accessible such as the removal and reinstallation of the tank if authorized in advance (pre-approved) by UPF. The warranty will not cover tanks that have been improperly installed, operated, misused, abused, or modified from its intended or designed use. Serial number must not have been altered, defaced or removed. Tanks that are not stored or installed properly which results in the tank suffering UV damage will not be covered by this agreement. Should UPF determine that the service claim is valid under this warranty for a tank located outside of the United States and Canada, UPF will assume the costs for labor and material for the warranty repair as described above plus all travel costs to the U.S. port of embarkation. Costs for airline travel outside of the U.S. and Canada will not be the responsibility of UPF. In the event the tank shall become stationed in an area of the world that is considered to be a war zone or where unsafe conditions exist for the safe passage of United States Nationals, as reported by the United States Department of State, ( and a request to perform service or warranty repairs, UPF reserves the right to refuse to honor such requests. It is the purchaser s responsibility to relocate the tank to an area where such repairs can be performed without undue risk to UPF employees or their designee. UPF will make every reasonable effort to support our products though alternative means. For Ellipse elliptical tanks, a separate five year warranty provided by the subcontractor is applied to the sub-frames, chute linings (rubber isolation strips) and metal components. The stainless steel wrap provided by UPF shall be warranted by the subcontractor performing the wrap installation in accordance with their warranty in place at the time of the installation. UPF will not be liable for any warranty costs associated with the wrap, sub-frames, chute linings (rubber isolation strips) and metal components but will assist with all claims on behalf of its customer. For PolySide wetsided tanks and Integrator Tank/Body units, all polypropylene components related to the tank shall carry the standard UPF lifetime Continued on back

48 UNITED PLASTIC FABRICATING, INC. WARRANTY FOR: POLY-TANK, POLYSIDE, INTEGRATOR, ELLIPSE, ELLIP-T-TANK & DEFENDER service warranty. Other polypropylene components, including but not limited to compartments, wheel wells, fenders and other body related components shall be warranted by UPF for a period of ten years. The warranty for the PolySide and Integrator units excludes paint or hardware, which shall be covered by the manufacturer of the paint/hardware. All UPF tanks 50 gallons or less utilized for non-fire applications and installed on specialty vehicles such as ATVs, trailers, boats, etc. are covered under a separate warranty policy available from UPF. Further, UPF Protector foam and water trailers are warranted under a separate warranty policy available from UPF. This UPF warranty is transferable within the United States only with prior written approval by UPF (except an original apparatus manufacturer may assign this warranty to the first titled owner/lessee of the apparatus). UPF will NOT reimburse any unnecessary work and/or work that has not been pre-approved. Any and all third party charges must be preauthorized and approved in writing by UPF prior to commencing the work. Any unauthorized third party repairs, alterations, actions or modifications will not be covered and can void the warranty. UPF will be the sole determining authority as to whether a service claim will be valid and covered under this warranty. In no event will UPF be liable for an amount in excess of the purchase price of the booster/foam tank at the time of manufacture or for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of failure of its product. Loss of contents (water, foam, etc.) shall not be the responsibility of UPF. Further, UPF is not responsible for costs associated with service repairs to chassis, sub-frames, bodies, valves, dumps, hoses, pressure vacuum vents, and other components (i.e. liquid level transducers, etc.). Further, UPF will not cover the cost for travel of the vehicle to and from a repair facility. This warranty contains the entire warranty. It is the sole warranty and price agreements or representation, whether oral or written, are either merged herein or expressly cancelled. UPF neither assumes, nor authorizes any person supposing to act on its behalf to change, nor assume for it, any warranty or liability concerning its product. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow exclusion or limitation or incidental or consequential damage, so the above limitation or exclusion may not apply to you. Since some states do not allow limitations on the length of an implied warranty, the above limitation may not apply to you. THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, WHICH EX- TEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITION- ALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATION OR LIABILITIES ON THE PART OF UPF. POLY-TANK,& POLYSIDE are registered trademarks of UPF, Inc. INTEGRATOR, ELLIPSE, ELLIP-T-TANK & DEFENDER are trademarks of UPF, Inc. 08/01/09 UPF, Inc. Printed in the USA

49 WATEROUS COMPANY ("WATEROUS") warrants, to the Original Buyer only, that products manufactured by WATEROUS will be free from defects in material and workmanship under normal use and service for a period of five (5) years from the date the product is first placed in service, or five and one-half (5-1/2) years from the date of shipment by WATEROUS, whichever period shall be the first to expire; provided the Buyer notifies WATEROUS, in writing, of the defect in said product within the warranty period, and said product is found by WATEROUS to be nonconforming with the aforesaid warranty. When required in writing by WATEROUS, defective products must be promptly returned by Buyer to WATEROUS at WATEROUS' plant at South St. Paul, Minnesota, or at such other place as may be specified by WATEROUS, with transportation and other charges prepaid. Return Material Authorization (RMA) is required for all products and parts and may be requested by phone, FAX or mail. Subject to the limitations contained in the last paragraph hereof, this warranty covers labor to dismantle, remove and reinstall such covered product or parts. The aforesaid warranty excludes and responsibility or liability of WATEROUS for: (a) provided for such products shall be the warranty provided by the manufacturer thereof which, if assignable, WATEROUS will assign to Buyer, if requested damages or defects due to accident, abuse, misuse, abnormal operating conditions, negligence, accidental causes, or improper maintenance or attributable to written specifications or instructions furnished by Buyer; (b) defects in products manufactured by others and furnished by WATEROUS hereunder, it being understood and agreed by the parties that the only warranty by Buyer; (c) any product or part, altered, modified, serviced or repaired other than by WATEROUS, without its prior written consent; and (d) the cost of transporting, storing, or insuring the defective product or part. (e) normal wear items (packing, strainers, filters, light bulbs, anodes, intake screens, mechanical seals, etc.). This Warranty is subject to WATEROUS' Conditions of Sale (Waterous Company form number F-2190) as currently in effect all of which, except the Warranty Section thereof, are herein incorporated and by this reference made a part hereof. All other warranties are excluded, whether express or implied by operation of law or otherwise, including all implied warranties of merchantability of fitness for purpose. WATEROUS shall not be liable for consequential or incidental damages directly or indirectly arising or resulting from the breach of any of the terms of this limited warranty or from the sale, handling, or use of any WATEROUS product or part. WATEROUS' liability hereunder, either for breach of warranty or for negligence, is expressly limited at WATEROUS' option: (a) to the replacement at the agreed point of delivery of any product or part, which upon inspection by WATEROUS or its duly authorized representative, is found not to conform to the limited warranty set forth above, or (b) to the repair of such product or part, or (c) to the refund or crediting to Buyer or the net sales price of the defective product or part, less reasonable depreciation. Waterous Total Protection Package TPP-5 Buyer's remedies contained herein are exclusive of any other remedy otherwise available to Buyer. Under either such options (A) or (B), WATEROUS agrees 1. to either furnish the labor required to dismantle, remove and reinstall the product where located at Buyer's premises or, at WATEROUS' option. 2. to reimburse Buyer for its reasonable and accountable costs of such labor. Waterous Company 125 Hardman Avenue South South St. Paul, MN USA F-2625 (09/08)

50 Hale, Inc. 607 N.W. 27th Ave. Ocala, FL HALE Warranty Statement Subject to the following general and specific terms and conditions, Hale, Inc. ( Hale ) hereby warrants to the original Purchaser * that Products sold under Hale and Class 1 brands will be free of defects in material and workmanship for the applicable Warranty Period. General terms and conditions applicable for all Products are set forth under the heading General Terms and Conditions below. Product specific terms and conditions, including Warranty Periods and Warranty Coverages, are set forth in the Tables following the General Terms and Conditions. General Terms and Conditions The following limitations, exclusions, procedures and other terms and conditions shall apply for all Products: Warranty is voided if: Product is used for an application, with products or in a manner other than the application, products and manner for which such Product is designed and intended Product is subjected to a use, service, condition or environment other than a use, service, condition or environment for which such Product is designed and intended Product is not properly installed Product is not properly maintained in accordance with Hale s instruction manual and industry standards Product is altered, modified, serviced (except routine maintenance performed in accordance with Hale s instruction manual for Product and Industry accepted standards and guidelines), or repaired by a person other than Hale or a person authorized by Hale to make such alteration or modification or perform such service or repair Hale is not paid the full amount of the purchase price for Product when due No Warranty covers: Ordinary wear and tear Failure due to compliance with a specification or design provide or required by Purchaser Failure due to improper operation, excess pressure, excess voltage or other similar cause Failure due to operator error Damage during or after shipment and failure attributable thereto or resulting there from Failure attributable to or resulting from the failure or substandard, inadequate or improper performance of any part, component or equipment not supplied by Hale Failure attributable to or resulting from the failure or substandard, inadequate or improper performance of any third party (e.g., not Hale or Class 1 brand) part, component, product or equipment, whether or not combined, packaged, incorporated, installed or used with a Hale or Class 1 brand part, component, product or equipment. Hale shall have no obligation under any Warranty unless Purchaser or its customer promptly notifies Hale of the failure giving rise to the Warranty claim, such notice is received by Hale within the applicable Warranty Period, and Hale is provided with such information, data and records (including, but not limited to, in service date, run hours, and service and repair records) as Hale may reasonable request in evaluating the Warranty claim. The notice of failure must be given in writing, identify the Product claimed to be defective (including serial number, if any), and describe in reasonable detail the circumstances surrounding the failure. Repaired Product and replacement Product shall be warranted only for the remainder of the original Warranty Period. * The Purchaser is the original purchaser from Hale, whether the original purchaser is a distributor, dealer or other reseller, an OEM, or an end user. Hale, Inc. - Warranty Statement Page 1 Effective January 1, 2013

51 Hale reserves the right to use reconditioned parts for Warranty repairs and to use reconditioned Products for Warranty replacements. Hale shall have the right to physically inspect Product claimed to be defective. If requested by Hale, Purchaser shall deliver the Product claimed to be defective to Hale at its manufacturing facility or to another party or location designated by Hale. In such event, Hale shall issue to Purchaser a Return Materials Authorization (RMA) for the Product to be delivered. The Product must be delivered to Hale within 30 days of issuance of the RMA. The RMA number must be included with the Product when delivered to Hale. Failure to make timely delivery to Hale of the Product claimed to be defective shall void any Warranty. Purchaser or its customer shall be responsible for all freight and shipping changes in connection with the delivery of Product claimed to be defective to Hale at its manufacturing facility or to another party or location designated by Hale and the delivery of repaired or replacement Product or parts to Purchaser. Product claimed to be defective must be shipped by Purchaser freight prepaid. Repaired and replacement Product and parts therefore will be shipped to Purchaser freight collect. Purchaser shall bear all risk of loss or damage during shipment. If requested to do so by Purchaser, Hale may, at its sole option and in its sole discretion, supply a replacement Product or part to Purchaser prior to making a final determination as to whether Warranty Coverage is available. If Hale ultimately determines that no Warranty Coverage is available for the Product claimed to be defective, whether the determination is based on the Warranty being voided, the Product failure being due to a cause not covered by the Warranty, the failure to make a timely and proper Warranty claim, or otherwise, Purchaser or its customer will be required to purchase the replacement Product or part that has been supplied to it by Hale at the price at which Purchaser is then entitled to purchase such Product or part under the Supply Agreement. If Hale ultimately determines that no Warranty Coverage is available for a Product claimed to be defective, whether the determination is based on the Warranty being voided, the Product failure being due to a cause not covered by the Warranty, the failure to make a timely and proper Warranty claim, or otherwise, Purchaser shall have the option of either (i) having the Product returned to it freight collect, without repair or replacement, or (ii) if Hale determines that the Product is repairable, have the Product repaired by Hale or another party designated by it on a time and materials basis at Hale s then current standard charges for non-warranty repairs and then returned to Purchaser freight collect. HALE S WARRANTY AS SET FORTH HEREIN IS HALE S SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON- INFRINGMENT ALL OF WHICH OTHER WARRANTIES ARE EXPRESSLY EXCLUDED. THE RIGHTS AND REMEDIES SET FORTH HEREIN ARE THE SOLE AND EXCLUSIVE RIGHTS AND REMEDIES AGAINST HALE. EXCEPT FOR THE SPECIFIC LIABILITIES AND OBLIGATIONS PROVIDED HEREIN, HALE SHALL HAVE NO LIABILITY OR OBLIGATION WITH RESPECT TO ANY PRODUCT CLAIMED TO BE DEFECTIVE IN ANY MANNER. UNDER NO CIRCUMSTANCES SHALL HALE BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, LOST OR UNREALIZED SALES, REVENUES, PROFITS, INCOME, COST SAVINGS OR BUSINESS, LOST OR UNREALIZED CONTRACTS, LOSS OF GOODWILL, DAMAGE TO REPUTATION, LOSS OF PROPERTY, LOSS OF INFORMATION OR DATA, LOSS OF PRODUCTION, DOWNTIME, OR INCREASED COSTS, IN CONNECTION WITH ANY PRODUCT, EVEN IF HALE IS ADVISED OR PLACED ON NOTICE OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING THE FAILURE OF ANY ESSENTIAL PURPOSE OF ANY PRODUCT. Hale, Inc. - Warranty Statement Page 2 Effective November 1, 2012

52 Pumps Mid-Ship, Rear Mount, and Booster (Excludes all Engine Driven Units) Product * Fire Service Applications (non-marine) HALE, INC. Product Specific Warranty Terms and Conditions Warranty Period Warranty Coverage ** Earlier of (i) 5 years from in service date of vehicle or equipment in which Product is initially installed, or (ii) 5-1/2 years from date of shipment of Product to original Purchaser. (January 1, 2013) Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. At time pump is ordered, original Purchaser may take Standard Warranty at no charge or purchase Extended Warranty for an additional charge which will be quoted by Hale at original purchaser's request at time of order. Under Standard Warranty, Hale will cover parts and labor for first 2 years of Warranty Period and parts only (no labor) for remainder of the Warranty Period. Under Extended Warranty (if purchased by original Purchaser), Hale will cover parts and labor for the full Warranty Period. Engine Driven Units *** Marine, Refueller and Other Applications Pump Ends Backpacks Floats HP Portables Cross-Chassis Skids Trailer Units Earlier of (i) 2 years from the date of shipment of Product to original Purchaser, or (ii) 2,000 run hours. If not used for rental or contracting, 2 years from the date of shipment of Product to original Purchaser. If used for rental or contracting, earlier of (i) 6 months from date of shipment to original Purchaser, or (ii) 1,000 run hours. If not used for rental or contracting, 3 years from the date of shipment of Product to original Purchaser. If used for rental or contracting, earlier of (i) 6 months from date of shipment to original Purchaser, or (ii) 1,000 run hours. Earlier of (i) 12 months from date of shipment to original Purchaser, or (ii) 1,000 run hours. When labor is covered, Service Provider will be reimbursed at Hale's then current standard labor hours and rates for labor to make repair (if not repaired by Hale) and to remove defective Product and re-install repaired or replacement Product. Hale's approval of repair estimate is required prior to performance of repair work. If applicable, actual mileage will be reimbursed at Hale's then current mileage reimbursement rate. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. Repair labor is included, but any other labor (including removal and reinstallation) and mileage are excluded. Service Provider will be reimbursed at Hale's then current standard labor hours and rates for labor to make repair (if not repaired by Hale). Hale's written authorization of repair estimate is required prior to performance of repair work. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Hale, Inc. - Warranty Statement Page 3 Effective November 1, 2012

53 Pump Modules Pump Body Weldments, Stainless Manifolds, and Fabricated Panels Product * Warranty Period Warranty Coverage ** 10 years from the date of shipment of Product to original Purchaser HALE, INC. Product Specific Warranty Terms and Conditions (January 1, 2013) Repair or replacement of Product that Hale determines failed (including cracks resulting from stress and rust through of panels) during Warranty Period due to a defect in material or workmanship. No labor is included. Pump modules are built to original Purchaser's specification or design. Although individual Hale and Class 1 components used for pump modules comply with NFPA standards, pump modules are not NFPA compliant. Original Purchaser is solely responsible for (i) ensuring finished pump houses are NFPA complaint and adhere to industry accepted standards and guidelines, and (ii) supplying manuals that include appropriate directions, instructions and warnings concerning pump house operation. Foam CAFS Systems, FoamLogix Proportioners, and EZ Fill 1 year from the date of shipment to original Purchaser. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Pump Repair & Replacement Parts Pressure Gauges 90 days from date of shipment of Product to original Purchaser. 3 years from date of shipment of Product to the original Purchaser. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Plumbing 2 years from date of shipment of Product to original Purchaser. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Valves Electronics SVS Torrent Valves Class 1 Valves 10 years from date of shipment of Product to original Purchaser on everything except seal. 2 years from date of shipment of Product to original Purchaser on seal. 10 years from date of shipment of Product to original Purchaser on everything except seal. No warranty on seal. 2 years from date of shipment of Product to original Purchaser. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. Repair or replacement of Product that Hale determines failed during Warranty Period due to a defect in material or workmanship. No labor is included. * When Products are combined to form a module or package, each Product will have its own separate Warranty Period and Warranty Coverage. ** For each Product, Hale will have the option to refund to Purchaser (in cash or by credit) the purchase price Hale was paid for such Product, less depreciation determined on a straight line basis over the Warranty Period, in lieu of repair or replacement (including, when applicable, labor). The decision whether to repair, replace or refund (and, if there is a refund, whether to refund in cash or by credit) shall be made by Hale in its sole discretion. *** All engine related service, performance and warranty issues will be handled by the engine OEM or their local distributor. Hale, Inc. - Warranty Statement Page 4 Effective November 1, 2012

54 Akron Brass Co. LIMITED WARRANTY IMPORTANT! READ IMMEDIATELY The limited warranty set forth below is given by Akron Brass Co. with respect to Akron Brass Co. products purchased and used in the United States and Canada, respectively. This limited warranty is only effective upon proof of purchase to Akron Brass Co. or an authorized Akron Brass Co. Service Facility in the U.S.A. or Canada. Akron Brass Co. products, when delivered to you in new condition in their original containers or mounted (no responsibility or liability is taken on warranties for incorrect or faulty mounting by others) are warranted against defective materials or workmanship for a period of five (5) years from the date of original delivery to the first end user. Five years for "The Hose Tester" Defective products or parts returned to an authorized Akron Brass Co. U.S.A. or Canada Service Facility, and proven to be defective upon inspection, will be exchanged for new parts or comparable rebuilt parts. The warranty period for replacement parts shall begin upon shipment of the same, but shall in no event exceed the warranty period of the defective part. When returning any Akron Brass Co. products under this limited warranty, you must prepay the shipping charges, if any, and enclose a complete explanation of the problem. Akron Brass Co. products covered by this limited warranty will be repaired or replaced and returned to you without charge by a Factory Service Center or any authorized Akron Brass Co. U.S.A. or Akron Brass Co. Canada Service Facility. Repairs not under warranty will be at such cost as Akron Brass Co. U.S.A. or Akron Brass Co. Canada, or an authorized Service Facility, may from time to time generally establish. This limited warranty covers all defects encountered in the normal use of Akron Brass Co. products, except in the following cases: (A) Loss or damage to any Akron Brass Co. products due to abuse, mishandling, alteration, accident, electrical current fluctuations, or failure to follow operating, mounting, and maintenance instructions. (B) There is no warranty on any Quartz or incandescent lamp or glass lens. (C) Use of parts or supplies which do not meet Akron Brass Co. U.S.A. or Akron Brass Co. Canada's specifications and which damage any Akron Brass Co., Inc. product causing abnormally frequent service calls or service problems. (D) If any Akron Brass Co. product has had its serial number or dating altered or removed. NO IMPLIED WARRANTY, (OR CONDITION*), INCLUDING ANY IMPLIED WARRANTY (OR CONDITION*) OF MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO ALL AKRON BRASS CO. PRODUCTS AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO ANY AKRON BRASS CO. PRODUCT SHALL BIND AKRON BRASS CO. U.S.A. OR AKRON BRASS CO. CANADA, (SOME STATE OR PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LAST, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) NEITHER AKRON BRASS CO. U.S.A. OR AKRON BRASS CO. CANADA, NOR ANY OTHER PERSON, FIRM OR CORPORATION, IS RESPONSIBLE FOR LOSS OF PROFITS, EXPENSE OR INCONVENIENCE, OR FOR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE AKRON BRASS CO. PRODUCTS WHETHER ON ACCOUNT OF NEGLIGENCE OR OTHERWISE, OR BY FAILURE TO CONFORM TO ANY EXPRESS OR IMPLIED WARRANTIES, (SOME STATES OR PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF AKRON BRASS CO. PRODUCTS. The limited warranty gives you specific legal rights, and you may also have other rights which may vary from state to state or province to province and unless otherwise required shall be Governed by the Laws and limitations of the State of Illinois. * In Canada

55 Other Quality Akron Brass Co. Products: Pull-Up Models Push-Up Models Through The Roof Models Non-Telescoping Swivel Bases PL-Hand Portable Flood Lights Tripods / Portable Light Towers Dual Heads can be mounted on any model PL-Hand Portables mounted on Poles or Tripods MANUAL/ELECTRIC REWIND REELS Live Cord Reels Live Cord Reel w/ Beta Light Cord Reels w/ Gang Box Non-Live Cord Reels Electric/Manual Rewind Reels PIKE POLES & MORE 2' - 16' Fiberglass Pike Poles - Available in solid I-Beam and Oval or hollow Round fiberglass 10' - 16' Double Gripper Pike Poles that can be shipped UPS - Oval or Round only Stainless Steel Mounting Brackets for Pike Poles and other Equipment Axes with either Fiberglass or Wooden Handles Pinch Point Bars, Fire Brooms, Rakes & Beaters Super Spanner, designed to fit most locking and non-locking 4" & 5" Storz couplings and 1-1/2" through 3" rocker lug type fire hose couplings Apparatus Flow Test Kits Hydrant Flow Test Kits Hand Held Pitots WATER FLOW TEST EQUIPMENT Line and Cap Gauges Apparatus Test Gauge Sets Hand Held Pump Speed Tachometers "THE HOSE TESTER" For testing 1" through 6" hose as required by NFPA. Call Anytime Fax: PHONE: or FAX: or Available in Canada through AKRON MANUFACTURING COMPANY PHONE: FAX: WARRANTY AND DISCLAIMER: We warrant Akron Brass products for a period of five (5) years after purchase against defects in materials or workmanship. Akron Brass will repair or replace product which fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Products must be promptly returned to Akron Brass for warranty service. We will not be responsible for: wear and tear; any improper installation, use, maintenance or storage; negligence of the owner or user; repair or modification after delivery; damage; failure to follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOS INCLUDED IN THIS WARRANTY STATEMENT, AND WE DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or indirect damage (included, but not limited to, any loss or profits) from any cause whatsoever. No person has authority to change this warranty. A Premier Farnell Company

56 Akron Brass warrants Heavy Duty Swing-Out Valves for a period of ten (10) years after purchase against defects in material or workmanship. Akron Brass will repair or replace any Heavy Duty Swing- Out Valve which fails to satisfy this warranty. Repair or replacement shall be at the discretion of Akron Brass. Electrical components shall carry our standard five (5) year warranty. We will not be responsible for: wear and tear; any improper installation, use or maintenance; negligence of the owner or user; repair or modification after delivery; failure to follow our instructions or recommendations; or anything else beyond our control. WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, OTHER THAN THOSE INCLUDED IN THIS WARRANTY STATEMENT, AND WE DISCLAIM ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Further, we will not be responsible for any consequential, incidental or indirect damages (including, but not limited to, any loss of profits) from any cause whatsoever. No person has authority to change this warranty. An ISO 9001: 2000 Registered Company AKRON BRASS 10 YEAR WARRANTY ON HEAVY DUTY SWING-OUT VALVES