SIOUX STEEL HEAVY DUTY HEAD GATE # & #198400

Size: px

Start display at page:

Download "SIOUX STEEL HEAVY DUTY HEAD GATE # & #198400"

Rolf Phelps
6 years ago
Views:

1 SIOUX STEEL MANUAL NO: CREATED: 2/2012 REV G: 4/10/14 ECN , KAG HEAVY DUTY HEAD GATE # & # WARNING!: KEEP HANDS & FINGERS AWAY FROM ALL HINGED AND MOVING PARTS DURING OPERATION. SIOUX STEEL COMPANY, P.O. BOX 1265, SIOUX FALLS, SOUTH DAKOTA

2 CONTENTS SAFETY PG 3 GENERAL INFORMATION PG 4 PARTS LIST AND DIAGRAMS SERIAL NUMBERS A TO A PGS 5-8 SERIAL NUMBERS A & UP PGS 9-12 ADJUSTMENTS PG WARRANTY PG 15 2

3 SAFETY Watch for this symbol. It points out important safety precautions. It means Attention Be Alert! DEFINITIONS: CAUTION: Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury. WARNING: Indicates a hazardous situation, which, if not avoided, could result in death or serious injury. DANGER: Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. If any decals become damaged, detached, or illegible contact your dealer or Sioux Steel Company at (800) for free replacements. A careful operator, is the best operator. To help prevent accidents, read the following precautions before operating this equipment. Equipment should be operated only by those who are responsible and knowledgeable of this type of equipment. Carefully review the procedures given in this manual with all operators. It is important that all operators be familiar with and follow safety precautions. Improper use of equipment can cause serious injury or death. 1. Read the operator's manual before operating equipment. 2. Keep hands, arms, feet, and legs away from all pinch points. 3. DO NOT remove any safety devices that have been provided for your protection. 4. DO NOT work around the equipment in loose clothing that might catch in any moving parts. 5. DO NOT modify the equipment without consulting a dealer or Sioux Steel Co. 6. Do NOT clean, lubricate, or adjust equipment, while equipment is operating. 7. Inspect the equipment regularly for any damage before and after each use. If damage to equipment occurs, equipment should not be used until repairs are made. Immediately, contact your dealer or Sioux Steel Warranty Department at (800) Repair of damages should be implemented as soon as practical, with appropriate Sioux Steel replacement parts. REMEMBER: Sioux Steel Co. includes all reasonable means for accident prevention except a safe and careful operator. 3

4 GENERAL INFORMATION - The Sioux Steel Heavy Duty Head Gate has been completely assembled at the factory. - Before operating check top and bottom pivot locations for grease. Add grease if necessary. If needed, oil all other hinged and moving parts. - Note serial numbers when referring to parts list and diagrams. WARNING! Keep hands and fingers away from all hinged and moving parts during operation 4

5 S PARTS LIST SERIAL # A TO A ITEM NO. PART NUMBER DESCRIPTION QTY W HD HEADGATE WLDT LH YOKE ASSY RH YOKE ASSEMBLY RELEASE ASSEMBLY TRIP CATCH Pivot pin 7.0" LOWER RELEASE ASSY KW BUSHING LINK BAR ASSY KW YOKE RELEASE WELMENT WASHER 7/16" TYPE A/W SERIES ZP LOCK NUT - 7/16-14UNC GR /16-14 X 2 HEX HD CAPSCREW KW CATCH PIN - HEAD GATE HANDLE WELDMENT COTTER PIN - 5/32" x 1" ZP SPRING- COMPRESSION.813 OD(CUT TO LENGTH) CARRIAGE BOLT-.50 X WASHER - 1/2 FLAT TYPE A/W SERIES ZP /2-13 LOCK NUT /8 SNAP PIN ZERK- 1/4" DRIVE IN Stop Pin Wldt HAIR PIN SCREW-.50HHC-13 X 5" WARNING DECAL "PINCH POINT" DECAL- SIOUX OVAL 2.63 X NOSE BAR PIN (OPTIONAL) NOSE BAR CHAIN WELDMENT (OPTIONAL) NOSE BAR WELDMENT (OPTIONAL) SERIAL NUMBER DECAL HANDLE CAP HANDLE CAP SPRING- EXTENSION 1.50 X HEX BOLT- 1/2-13 UNS X G NUT- 1/2-13UNC HEX LOCK SPRING- DIE 4.0 X.5 2 5

S191470 PARTS DIAGRAM SERIAL # A000001 TO A001650 YOKE RELEASE SEE DETAIL ON NEXT PAGE 23 24 26 31

6 S PARTS DIAGRAM SERIAL # A TO A YOKE RELEASE SEE DETAIL ON NEXT PAGE OPTIONAL OPTIONAL 30 OPTIONAL 29 NOSE BAR COMPONENTS ARE OPTIONAL FRONT VIEW 6

S191470 PARTS DIAGRAM (CONT) SERIAL # A000001 TO A001650 14 17 18

7 S PARTS DIAGRAM (CONT) SERIAL # A TO A YOKE RELEASE DETAIL RELEASE ASSY DETAIL 7

S191470 PARTS DIAGRAM (CONT) SERIAL # A000001 TO A001650 9 20 19 18

8 S PARTS DIAGRAM (CONT) SERIAL # A TO A RELEASE ASSY SEE DETAIL ON PREVIOUS PAGE 22 BACK VIEW 8

9 S PARTS LIST SERIAL # A AND GREATER ITEM NO. PART NUMBER DESCRIPTION QTY MAINFRAME LH YOKE WLDT RH YOKE WLDT LOWER RELEASE WLDT REAR YOLK RELEASE WLDT FRONT YOLK RELEASE WLDT PIVOT BUSHING LINKAGE BAR TRIP CATCH SERIAL NUMBER DECAL HANDLE WELDMENT SPRING- EXTENSION 1.50 X HANDLE CAP HANDLE CAP WARNING DECAL "PINCH POINT" DECAL- SIOUX OVAL 2.63 X COMPRESSION SPRING KNOB W/THEADED STUD COTTER PIN - 5/32" x 1" ZP ZERK- 1/4"-28 strght-short thrds SCREW- 1/2-13 X 2 1/4 GR WASHER FLAT TYPE A/W SERIES BZ NUT-.500 HEX LOCK SCREW-.500 HHC - 13 X 6.50 GR5 ZP SCREW-.500 HHC -13 X 1.50 GR5 ZP Screw-.500 HHC - 13x4.00 GR8 ZP /8 SNAP PIN SCREW-.500 HHC-13 X 9.00 GR3 ZP SCREW-.500 HHC-13 X 5.50 GR5 ZP Stop Pin Wldt HAIR PIN COTTER X

10 S PARTS DIAGRAM SERIAL # A AND GREATER SEE DETAIL A ON NEXT PAGE A X X X 14 2X 20 4X FRONT VIEW 10

11 S PARTS DIAGRAM (CONT) SERIAL # A AND GREATER DETAIL A SCALE 1 : 8 11

12 S PARTS DIAGRAM (CONT) SERIAL # A AND GREATER BACK VIEW 12

13 ADJUSTMENTS TO ADJUST YOKES 1) REMOVE 3/8" SNAP PIN. 2) SLIDE YOKE ASSEMBLY TO ONE OF THE THREE SETTINGS PROVIDED (ALIGN HOLES). 3) REPLACE 3/8" SNAP PIN. 3/8" SNAP RING PROVIDED YOKE SETTINGS YOKE ASSEMBLY 3/8" SNAP RING YOKE ASSEMBLY PROVIDED YOKE SETTINGS 13

14 ADJUSTMENTS (CONT) READY POSITION OPENING READY POSITION ADJUSTMENT KNOB 1) ADJUST KNOB CLOCKWISE TO ADJUST READY POSITION TO A SMALLER OPENING. 2) ADJUST KNOB COUNTER-CLOCKWISE TO ADJUST READY POSITION TO A LARGER OPENING. B DETAIL B SCALE 1 : 6 14

15 NEW PRODUCT WARRANTY LIVESTOCK EQUIPMENT LIMITED WARRANTY FOR NEW SIOUX STEEL COMPANY PRODUCTS A. GENERAL PROVISIONS. Sioux Steel means Sioux Steel Company, 196 1/2 East Sixth Street, Sioux Falls, South Dakota The warranties described below are provided by Sioux Steel to the original purchasers of new products purchased from Sioux Steel or from an authorized Sioux Steel Dealer (the Products ). Under these warranties, Sioux Steel will, at its option, repair or replace at its factory any Product covered under these warranties which is found to be defective in material and workmanship during the applicable warranty term or refund the purchase price paid for the defective Product. Customer will be responsible for labor charges for removing the defective Product and reinstalling the repaired or replacement Product, any premium charge for overtime labor requested of Sioux Steel and shipping charges to and from Sioux Steel s factory. These warranties are not transferrable. B. WARRANTY PERIOD. Subject to exclusions and limitations set forth herein, each new Product is warranted for the number of years specified below. Each warranty term begins from the date of purchase regardless of delay in receipt of the Product by Customer due to the time required to process, handle, ship, assemble, construct and install the Product. Customer must retain proof of the date of purchase. Replacement parts for and repairs to the Product will be warranted only for the remainder of the original warranty term. The replacement parts for or repairs to the Product will not extend the warranty term beyond the original warranty term. Products described below include all parts, components and accessories. LIVESTOCK EQUIPMENT Victory, Cattleman s, Heavy Duty and Super Six steel construction livestock gates Lifetime labeled through the Company s Lifetime Guarantee Gate Program ( Lifetime Guaranteed Gates ) All Poly Products 2 years Post Puller/Pounder Consumer Use 1 Year Commercial or Government Use 6 Months All Other Livestock Equipment, including Bulk Bins and all Livestock Gates that are not 1 Year labeled through the Guarantee Gate Program as provided above Exclusions specific to Livestock Equipment: Damage or loss of any kind from (1) storage of feed products that are not free-flowing or that have a density greater than 40 pounds per square foot; and (2) the storage of materials other than free-flowing livestock feed. C. ITEMS COVERED SEPARATELY. The Sioux Steel warranties do not cover any parts, components or materials that are part of the Product, or used in conjunction with the Product, that are not manufactured by Sioux Steel. Such parts, components and materials will be subject to the warranties provided by the manufacturer, if any. D. WHAT IS NOT WARRANTED. Sioux Steel does not warrant and is not responsible for the following: (1) used products; (2) modification or alteration of the Products; (3) Products that have not been properly installed or not installed in accordance with the instruction manual, improper assembly, or improper construction by any persons other than Sioux Steel employees; (4) depreciation, damage or loss caused by the use of parts, components or accessories not provided by Sioux Steel, unauthorized repairs, normal wear, lack of necessary and proper maintenance, a failure to follow operating instructions/recommendations, misuse, lack of proper protection during storage, vandalism or theft, exposure to the elements or corrosive materials, accidents or acts of nature including lightning, flooding, hail, straight winds and tornadoes; and (5) cosmetic damage or damage that does not hinder the functionality of the Products. E. LIFETIME GUARANTEED GATES. The Limited Warranty for New Sioux Steel Company Products shall apply to the Lifetime Guaranteed Gates ( Gates ) for the life of the original purchaser with the exception of Section D above. Sioux Steel does not warrant and is not responsible for the following: (1) modification or alteration of the Gates; (2) cosmetic damage, normal wear and tear or damage that does not hinder the functionality of the Gates, including fading of the color; (3) damage caused by use for purposes inconsistent with its intended purpose or design; (4) damage due to use of any parts or components not supplied by the Sioux Steel. F. LIMITATIONS OF WARRANTIES AND CUSTOMER S REMEDIES. To the extent permitted by law, neither Sioux Steel, the Dealer nor any person or company affiliated with either of them makes any warranties, representations, conditions or promises express or implied as to the quality, performance or freedom from defects of the Products covered by these warranties other than those set forth herein. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NEITHER SIOUX STEEL, THE DEALER, NOR ANY PERSON OR COMPANY AFFILIATED WITH EITHER OF THEM WILL BE LIABLE FOR ANY DAMAGES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL, SPECIAL, EXEMPLARY, CONSEQUENTIAL, LOST PROFITS AND REVENUES, LOST USE OF THE PRODUCTS OR ANY OTHER PROPERTY, BODILY INJURY OR PROPERTY DAMAGE CLAIMS OF ANY PERSON, LOST COMMODITIES, REMOVAL OR STORAGE COSTS FOR THE PRODUCTS, OTHER EQUIPMENT AND COMMODITIES, DAMAGE TO THE ENVIRONMENT ARISING FROM OR IN ANY MANNER RELATED TO ANY RELEASE OF HAZARDOUS MATERIALS, AND REMEDIATION EXPENSES THEREFORE, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY OR ANY OTHER LEGAL BASIS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO INSTANCE WILL SIOUX STEEL, THE DEALER OR ANY PERSON OR COMPANY AFFILIATED WITH EITHER OF THEM BE LIABLE TO CUSTOMER OR ANY PERSON IN AN AMOUNT IN EXCESS OF THE PURCHASE PRICE PAID BY CUSTOMER FOR THE PRODUCT. G. NO DEALER WARRANTY. THE DEALER HAS NO AUTHORITY TO MAKE ANY WARRANTY, REPRESENTATION, CONDITION OR PROMISE ON BEHALF OF SIOUX STEEL, OR TO MODIFY THE TERMS OR LIMITATIONS OF THIS WARRANTY IN ANY WAY. H. GOVERNING LAW/VENUE. These warranties, and all terms set forth herein, are governed by the laws of the State of South Dakota and, where applicable, the laws of the United States of America. Any and all disputes arising from these warranties, the purchase and use of the Products, bodily injury and property damage claims or otherwise must be venued in the South Dakota Circuit Court sitting in Minnehaha County, South Dakota. Customer agrees to such venue and waives any challenge to such court s jurisdiction based upon lack of personal jurisdiction or inconvenience. I. SECURING WARRANTY SERVICE. In order to receive warranty services, customer must give Sioux Steel written notice of a warranty claim within 30 days of the date of discovery of the defective materials or workmanship, and Customer must complete the following steps: (1) Obtain from Sioux Steel a Return Goods Authorization Number ( RGA Number ) by calling the Customer Service Department at , and providing the following information: An explanation as to why the Product is being returned. The name of the territory representative, Dealer or Sioux Steel salesperson from whom the Product was purchased. The Dealer s identification number. The invoice number and date of purchase. Customer s name, phone number, fax number, mailing address and address. The date that the Product will be returned. (2) Pay the shipping charges to ship the Product to Sioux Steel s factory, and the return shipping charges. (3) Ship the Product to Sioux Steel at 196 1/2 East Sixth Street, Sioux Falls, South Dakota { } 15

HI QUAL HEAVY DUTY HEAD GATE

MANUAL NO: 208659 CREATED: 1/2017 HI QUAL HEAVY DUTY HEAD GATE 198400 WARNING!: KEEP HANDS & FINGERS AWAY FROM ALL HINGED AND MOVING PARTS DURING OPERATION. SIOUX STEEL COMPANY, 196 1/2 e. 6th St, SIOUX