2011 ADVANCED MANUFACTURING TECHNOLOGY

Size: px
Start display at page:

Download "2011 ADVANCED MANUFACTURING TECHNOLOGY"

Transcription

1

2 Name :. Roll No. :..... Invigilator s Signature :.. CS/B. Tech (ME/PE)/SEM-7/ME-701/ ADVANCED MANUFACTURING TECHNOLOGY Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates are required to give their answers in their own words as far as practicable. GROUP A ( Multiple Choice Type Questions ) 1. Choose the correct alternatives for the following : 10 1 = 10 i) Rapid prototyping is a kind of a) forming process b) joining process c) generative manufacturing process d) finishing process. ii) Group technology brings together and organizes a) common parts, problems and tasks b) automation and tool production c) documentation and analysis d) parts and simulation analysis. iii) Feature recognition is related to a) Computer aided process planning b) Computer aided material planning c) Robotic welding d) none of these [ Turn over

3 CS/B. Tech (ME/PE)/SEM-7/ME-701/ iv) Compared to conventional machining of metals. AWJM provides a) higher MRR b) Higher dimensional accuracy c) better surface finish d) all of these e) none of these. v) Production flow analysis is a technique used in relation to a) assembly line balancing b) group technology c) automated inspection system d) all of these. vi) Expert system is related to a) CMM b) CAD c) Al d) CNC Machines. vii) The fundamental philosophy of CIM is a) Value engineering b) Reverse engineering c) Concurrent engineering d) Sequential engineering. viii) The mechanism of AGV is based on the principle of a) triangulation b) interferometry c) embedded wire guided method d) none of these. ix) MRR in ECM depends on a) hardness of work material b) atomic weight of work material c) thermal conductivity of work material d) ductility of work material

4 CS/B. Tech (ME/PE)/SEM-7/ME-701/ x) Transfer lines are a) soft automation b) hard automation c) flexible automation d) all of these. GROUP B ( Short Answer Type Questions ) Answer any three of the following. 3 5 = a) What are the objectives of computer aided quality control? b) Differentiate between hard automation and soft automation a) What is the working principle of a non-contact inspection method? b) What do you mean by concurrent engineering? a) Explain composite part concept. b) What do you understand by Production Flow Analysis? a) What are the different types of flexibilities in FMS? b) How is G.T. useful in FMS? a) Mention various elements of CIM. b) State the role of DBMS in CIM environment a) What do you mean by cloud point data in CAD? b) State the salient features of solid modeling GROUP C ( Long Answer Type Questions ) Answer any three of the following = a) With simple diagrams explain the effect of various process parameters in an USM process [ Turn over

5 CS/B. Tech (ME/PE)/SEM-7/ME-701/ b) Explain in short the various components used in USM machining unit a) In an electrochemical machining process with a pure iron work piece, a removal rate of 5 cm 3 /min is desired. Determine the current required. The gram atomic weight, valency and density of iron are 3 56 gm, 2, 7 8 gm/ cm respectively. b) In ECM process, why is electrolyte flow necessary? c) Explain the reasons for poor surface finish in an ECM process. d) Discuss in short the effects of ECM on materials a) During an electric discharge drilling of a 10 mm square hole in a low carbon steel plate of 5 mm thickness, brass tool and kerosene are used. The resistance and the capacitance in the relaxation circuit are 50 ohm and 10 micro Farad respectively. The supply voltage is 200 volts and the gap is maintained at such a value that the discharge takes place at 150 volts. Estimate the time required to complete the drilling operation. b) Explain any two EDM circuit for supplying pulsating dc current a) Discuss about the CAPP system. b) Define Group Technology concept in detail. c) What do you mean by rapid prototyping? a) Discuss about the co-ordinate measuring machines. b) Describe the application of automated integration in CAD/CAM/CIM system

6 Name :. Roll No. :..... Invigilator s Signature :.. CS/B.TECH(ME)/SEP.SUPPLE/SEM-7/ME-701/ ADVANCED MANUFACTURING TECHNOLOGY Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates are required to give their answers in their own words as far as practicable. GROUP A ( Multiple Choice Type Questions ) 1. Choose the correct alternatives for the following : 10 1 = 10 i) Mechanics of material removal in EDM is a) melting and evaporation aided by cavitation b) mechanical cutting action c) melting d) electrolysis. ii) Which one of the following is a binary sensor? a) Accelerometer b) DC Tachometer c) Proximity switch d) Thermistor. iii) Diamond tools should be used for high speed machining of a) cast iron jobs b) mild steel jobs c) aluminium jobs d) carbide jobs. SS-322 [ Turn over

7 CS/B.TECH(ME)/SEP.SUPPLE/SEM-7/ME-701/2012 iv) CAPP is fully integrated with a) CAD and CAM b) only CAD c) only CAM d) none of these. v) The hardest manufactured cutting tool material is a) diamond b) ceramic c) carbon boron nitride d) tungsten carbide. vi) The fundamental philosophy of Computer Integrated Manufacturing is a) Sequential Engineering b) Concurrent Engineering c) Reserve Engineering d) Value Engineering. vii) The mechanism of AGV is based on the principle of a) acoustic emission b) embedded wire guided method c) interferometry d) triangulation. viii) The dielectric fluid is used in ix) a) ECM b) USM c) AJM d) EDM. In EBM process, the maximum material removal rate is a) 20 mm 3 /min b) 30 mm 3 /min c) 10 mm 3 /min d) 40 mm 3 /min. x) Lower machining accuracy is obtained in a) PAM b) LBM c) EBM d) EDM. SS-322 2

8 CS/B.TECH(ME)/SEP.SUPPLE/SEM-7/ME-701/2012 GROUP B ( Short Answer Type Questions ) Answer any three of the following. 3 5 = With a simple diagram explain the working of Plasma Arc Machining. 3. a) What do you mean by flexible manufacturing system? b) Define rapid prototyping Use successive approximation method to convert an input signal of 6 8 V from analog to digital signal for a 6-bit Register of an ADC with a full scale range of 10 V. 5. Write down the benefits of FMs. GROUP C ( Long Answer Type Questions ) Answer any three of the following = a) Draw the resistance-capacitance relaxation circuit used in EDM. Show the variation of instantaneous voltage across the tool-workpiece gap along with the time. Prove that t V = V 1 e RC. Notations have their usual 0 meanings. b) During an electric discharge drilling of a 10 mm square hole in a low carbon steel plate of 5 mm thickness, brass tool and kerosene are used. The resistance and the capacitance in the relaxation circuit are 50 Ω and 10 μf, respectively. the supply voltage is 200 volts and the gap is maintained at such a value that the discharge (sparking) takes place at 150 volts. Estimate the time required to complete the drilling operation. Use the correlation 1 54 Q = 27 7 W. ( ) + 7 SS [ Turn over

9 CS/B.TECH(ME)/SEP.SUPPLE/SEM-7/ME-701/ a) Describe the fundamental principles of metal removal in Electro-chemical Machining. Briefly explain the significance of Electrolyte used in ECM and also the importance of 'Tool-work gap'. b) Discuss the mechanism of material removal for Abrasive Jet Machining. How to select the best possible abrasive and nozzle material to be used in this process? c) Write a note on the special features of the equipments used in Water Jet Machining a) Explain the main factors that affect the AJM removal rate. b) Explain LBM and show using a line sketch, the material removal mechanism of the process. c) State three commonly used graphics standards and mention their advantages with reference to specific application a) Explain the selective layer sintering process. b) Under what circumstances is Reverse Engineering recommended? c) Explain with a neat sketch the geometry of a drilled hole using LBM a) Explain detail integration of CAD with CAM. b) Describe the basic principle of operation of AGV. c) List application of AGV in CIM ============= SS-322 4

10 Name : Roll No. :.... Invigilator s Signature :.. CS/B.Tech (ME,PE)/SEPARATE SUPPLE/SEM-7/HU-702/ ENGG. ECONOMICS & FINANCIAL MANAGEMENT Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates are required to give their answers in their own words as far as practicable. GROUP A ( Multiple Choice Type Questions ) 1. Choose the correct alternatives for any ten of the following : 10 1 = 10 i) In a highly populated country production is increasing in a) G. P. Ratio b) A. P. Ratio c) Double rate of population increase d) None of these. ii) Use of three dimension land is required at a) Village area b) City c) Hilly area d) All of these. SS-174 [ Turn over

11 CS/B.Tech (ME,PE)/SEPARATE SUPPLE/SEM-7/HU-702/2011 iii) When a demand of product is non-elastic it is a a) Essential goods b) Luxurious goods c) Goods with many substitutes d) None of these. iv) Match each item in the left hand Column A with an appropriate item in the right hand Column B. Column A Broaching Soldering Minimum level of production Kanban Column B Metal joining Metal cutting Flow control system Break-even analysis v) Demand and supply is smoothly regulated in a) Competitive market b) Monopoly market c) Duo-poly market d) Oligopoly market. vi) Break-even point is connected with a) Standard costing b) Job costing c) Critical path analysis d) Marginal costing. vii) Textile industries are a) Contract costing b) Process costing c) Uniform costing d) Marginal costing. viii) Demand estimation depends on a) Profit maximization b) Market experiments c) Long-run survival d) Management utility maximization. SS-174 2

12 CS/B.Tech (ME,PE)/SEPARATE SUPPLE/SEM-7/HU-702/2011 ix) Net present value decides by a) F = P( 1 + i) n b) P = F ( 1 + i) n c) P = P = # n t=1 ct ( 1 + k)t " co n ct d) P = # ( 1 + r)t " co = 0. t=1 x) Halsey plan decides by a) Time taken Time wage rate b) Time taken Time wage rate Time saved Time wage rate Time taken Time allowed c) Time taken Time wage rate + 50% of time saved time wage rate d) None of these. xi) Patents is a) Asset b) Liability c) Source of Income d) None of these. xii) When gross profit is 25% of cost of goods sold, sale is a) 4 times of gross profit b) 5 times of gross profit c) Ten times of gross profit d) 3 times of gross profit. SS [ Turn over

13 CS/B.Tech (ME,PE)/SEPARATE SUPPLE/SEM-7/HU-702/2011 GROUP B ( Short Answer Type Questions ) Answer any three of the following. 3 5 = The modern meaning of economics renders help in various matters of decision making. Discuss. 3. Define the meaning of production. Describe briefly the function of production. 4. State and explain the law of marginal utility. Mention its limitation and importance. 5. Distinguish between any two of the following : a) Individual s demand and market demand b) Firm and industry demand c) Autonomous and derived demand d) Perishable and durable goods. 6. Why does the government intervene through various means in product pricing? Discuss. SS-174 4

14 CS/B.Tech (ME,PE)/SEPARATE SUPPLE/SEM-7/HU-702/2011 GROUP C ( Long Answer Type Questions ) Answer any three of the following = a) Define the maximizing of firm. Explain briefly the main objectives of firm. b) A carpenter makes 100 chairs per month and sells them at Rs. 150 per piece. His expenses on rent of the shop, cost of wood and other materials are worth Rs. 5,000. He employs two workers those monthly wage bills stand at Rs. 2,400 and pays electricity bill of about Rs. 500 per month. He has invested Rs. 50,000 in the form of machines tools and inventories in the business, of which Rs. 25,000 is from his own fund and the remaining Rs. 25,000 is a loan from Bank at the interest rate of 18% per annum, Further, assuming imputed cost of his own time, his wife s time and his own savings of Rs. 25,000 for the month are Rs. 3,000, Rs. 1,000 and Rs. 250 respectively, calculate : i) Total receipts ii) iii) iv) Total explicit costs Total implicit costs Business ( Accounting ) profit v) Economic profit SS [ Turn over

15 CS/B.Tech (ME,PE)/SEPARATE SUPPLE/SEM-7/HU-702/ A company is considering the following investment projects : Cash flow Project Yr 0 Yr 1 Yr 2 Yr 3 A B C D Rank the projects according to the following methods. (1) Payback (2) NPV assuming discount rates of 10 and 30 percent. P.V. at Re. 30% At the end of 1 yr At the end of 2nd yr At the end of 3rd yr X co. has made plans for the next year. It is estimated that the company will employ total assets of Rs. 8,00,000, 50% of the assets being financed by borrowed capital at an interest cost of 8% per year. The direct costs for the year are estimated of Rs. 4,80,000 and all other operating expenses are estimated at Rs. 80,000. The goods will be sold to customers at 150% of direct costs. Tax rate is assumed to be 50%. You are required to calculate : i) Net profit margin ii) iii) Return on Assets Assets turnover and iv) Return on owner s equity SS-174 6

16 WBUT Mechanical Engineering 7th Semester Previous Year Question Paper 50% OFF Publisher : Faculty Notes Author : Panel Of Experts Type the URL : Get this ebook

2011 FINANCIAL MANAGEMENT - III

2011 FINANCIAL MANAGEMENT - III http://www.makaut.com Name :. Roll No. :..... Invigilator s Signature :.. 2011 FINANCIAL MANAGEMENT - III Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates

More information

R13 SET - 1 PART B. 5. a) Evaluate Sole trader form of organisation. b) Explain the Innovations theory of business cycles. (7M+9M)

R13 SET - 1 PART B. 5. a) Evaluate Sole trader form of organisation. b) Explain the Innovations theory of business cycles. (7M+9M) R13 SET - 1 1. a) Write a brief note about Macro Economics b) What is Isoquants c) What is an Optimum costs d) Explain the Margin of safety e) Distinguish between Public Company Vs Private Company f) Explain

More information

Time: 3 hours Max. Marks: 70. PART B (Answer all five units, 5 X 10 = 50 Marks) UNIT I

Time: 3 hours Max. Marks: 70. PART B (Answer all five units, 5 X 10 = 50 Marks) UNIT I Code: 13A52501 R13 B.Tech III Year II Semester (R13) Regular & Supplementary Examinations May/June 2017 (Common to ME, ECE and EIE) Time: 3 hours Max. Marks: 70 PART A (Compulsory Question) 1 Answer the

More information

I B.Com PA [ ] Semester II Core: Management Accounting - 218A Multiple Choice Questions.

I B.Com PA [ ] Semester II Core: Management Accounting - 218A Multiple Choice Questions. 1 of 23 1/27/2018, 11:53 AM Dr.G.R.Damodaran College of Science (Autonomous, affiliated to the Bharathiar University, recognized by the UGC)Reaccredited at the 'A' Grade Level by the NAAC and ISO 9001:2008

More information

Roll No. :... Invigilator's Signature :. CS/B.Tech(N)/CE/EE/CSE/ECE/IT/EIE/ICE/BME/CHE/FT/ PWE/CT/EEE/SEM-5/HU-501/

Roll No. :... Invigilator's Signature :. CS/B.Tech(N)/CE/EE/CSE/ECE/IT/EIE/ICE/BME/CHE/FT/ PWE/CT/EEE/SEM-5/HU-501/ Name : Roll No. :... Invigilator's Signature :. CS/B.Tech(N)/CE/EE/CSE/ECE/IT/EIE/ICE/BME/CHE/FT/ 2012 ECONOMICS FOR ENGINEERS Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate

More information

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad INFORMATION TECHNOLOGY

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad INFORMATION TECHNOLOGY INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad - 500 043 INFORMATION TECHNOLOGY QUESTION BANK Course Name : MANAGERIAL ECONOMICS AND FINANCIAL Course Code : A40010 Class : II B.TECH-II

More information

157. PROFILE ON THE PRODUCTION OF BOLTS AND NUTS

157. PROFILE ON THE PRODUCTION OF BOLTS AND NUTS 157. PROFILE ON THE PRODUCTION OF BOLTS AND NUTS 157-1 TABLE OF CONTENTS PAGE I. SUMMARY 157-2 II. PRODUCT DESCRIPTION & APPLICATION 157-2 III. MARKET STUDY AND PLANT CAPACITY 157-3 A. MARKET STUDY 157-3

More information

Carolyn Nelson Instructor

Carolyn Nelson Instructor Coffeyville Community College BUSN-221 COURSE SYLLABUS FOR Managerial Accounting Fall 2015 Carolyn Nelson Instructor COURSE NUMBER: COURSE TITLE: BUSN-221 Managerial Accounting CREDIT HOURS: 3 INSTRUCTOR:

More information

Roll No. :... Invigilator s Signature :.. CS/B.TECH(IT)/SEM-5/M(CS)-511/ OPERATIONS RESEARCH AND OPTIMIZATION TECHNIQUES

Roll No. :... Invigilator s Signature :.. CS/B.TECH(IT)/SEM-5/M(CS)-511/ OPERATIONS RESEARCH AND OPTIMIZATION TECHNIQUES Name : Roll No. :.... Invigilator s Signature :.. CS/B.TECH(IT)/SEM-5/M(CS)-511/2011-12 2011 OPERATIONS RESEARCH AND OPTIMIZATION TECHNIQUES Time Allotted : 3 Hours Full Marks : 70 The figures in the margin

More information

MOCK TEST PAPER INTERMEDIATE (IPC): GROUP I PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT

MOCK TEST PAPER INTERMEDIATE (IPC): GROUP I PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT MOCK TEST PAPER INTERMEDIATE (IPC): GROUP I PAPER 3: COST ACCOUNTING AND FINANCIAL MANAGEMENT Test Series: March 2018 Answers are to be given only in English except in the case of the candidates who have

More information

Oerlikon Focus on surface solutions and additive manufacturing. Dr. Roland Fischer, CEO 18 th Kepler Cheuvreux Swiss Seminar Zurich, March 28, 2017

Oerlikon Focus on surface solutions and additive manufacturing. Dr. Roland Fischer, CEO 18 th Kepler Cheuvreux Swiss Seminar Zurich, March 28, 2017 Oerlikon Focus on surface solutions and additive manufacturing Dr. Roland Fischer, CEO 18 th Kepler Cheuvreux Swiss Seminar Zurich, March 28, 2017 Agenda 1 Oerlikon Group - Strategic Priorities 2 Surface

More information

Stock-Aware Toolpath Accelerates CAM Programming

Stock-Aware Toolpath Accelerates CAM Programming Stock-Aware Toolpath Accelerates CAM Programming A Technical Overview contents Optimizing Programming Time with In-Process Stock Models.. 2 The ESPRIT Stock Automation Engine... 2 Accelerating the Calculation

More information

CAPITAL MARKETS DAY Managing the downturn. Anders Thelin

CAPITAL MARKETS DAY Managing the downturn. Anders Thelin CAPITAL MARKETS DAY 2009 Managing the downturn Anders Thelin President Sandvik Capital Markets Day September 2009 page 1 Managing the downturn Business update Background Tactics and way of working Structural

More information

Power dissipation comparable to SOT23 Package height typ mm AEC-Q101 qualified

Power dissipation comparable to SOT23 Package height typ mm AEC-Q101 qualified Rev. 1 12 October 2017 Preliminary data sheet 1 Product profile 1.1 General description General-purpose Zener diode, encapsulated in an SOD882D leadless ultra small Surface-Mounted Device (SMD) plastic

More information

195. PROFILE ON THE PRODUCTION OF WATER HEATER

195. PROFILE ON THE PRODUCTION OF WATER HEATER 195. PROFILE ON THE PRODUCTION OF WATER HEATER 195-1 TABLE OF CONTENTS PAGE I. SUMMARY 195-2 II. PRODUCT DESCRIPTION & APPLICATION 195-2 III. MARKET STUDY AND PLANT CAPACITY 195-3 A. MARKET STUDY 195-3

More information

Halcyon Technology PLC. HTECH Opportunity Day Q2 18

Halcyon Technology PLC. HTECH Opportunity Day Q2 18 Halcyon Technology PLC. HTECH Opportunity Day Q2 18 19/09/18 Halcyon Timeline 2 Year Milestones 1993 Halcyon Metal Co., Ltd. first established for the manufacturing of jigs & fixtures and other metal fabricated

More information

166. PROFILE ON THE PRODUCTION OF DOOR LOCKS

166. PROFILE ON THE PRODUCTION OF DOOR LOCKS 166. PROFILE ON THE PRODUCTION OF DOOR LOCKS 166-1 TABLE OF CONTENTS PAGE I. SUMMARY 166-2 II. PRODUCT DESCRIPTION & APPLICATION 166-2 III. MARKET STUDY AND PLANT CAPACITY 166-3 A. MARKET STUDY 166-3 B.

More information

SAMPLE QUESTION PAPER 2 ECONOMICS Class XII BLUE PRINT

SAMPLE QUESTION PAPER 2 ECONOMICS Class XII BLUE PRINT SAMPLE QUESTION PAPER 2 ECONOMICS Class XII Maximum Marks: 00 Time: 3 hours BLUE PRINT Sl. No. Forms of Questions Content Unit Very Short ( Mark) Short Answer (3,4 Marks) Long Answer (6 Marks) Total. Unit

More information

CFA Program Financial Accounting (Text Book) - Study Plan

CFA Program Financial Accounting (Text Book) - Study Plan CFA Program Financial Accounting (Text Book) - Study Plan S.No 1. Introduction to Accounting and Financial Statements The meaning of Accounting Attributes of Accounting Output of accounting process Use

More information

183. PROFILE ON ASSEMBLY OF REFRIGERATOR

183. PROFILE ON ASSEMBLY OF REFRIGERATOR 183. PROFILE ON ASSEMBLY OF REFRIGERATOR 183-1 TABLE OF CONTENTS PAGE I. SUMMARY 183-2 II. PRODUCT DESCRIPTION & APPLICATION 183-2 III. MARKET STUDY AND PLANT CAPACITY 183-3 A. MARKET STUDY 183-3 B. PLANT

More information

50 V, 3 A PNP low VCEsat (BISS) transistor

50 V, 3 A PNP low VCEsat (BISS) transistor Rev. 6 28 June 2011 Product data sheet 1. Product profile 1.1 General description PNP low V CEsat Breakthrough In Small Signal (BISS) transistor in a small SOT457 (SC-74) Surface-Mounted Device (SMD) plastic

More information

1 PREFACE

1   PREFACE 22 PREFACE Machine Tools are Basic Investment and Production machines used to produce high value-added technologies in all sectors of manufactured goods and manufacturing industry, especially critical

More information

200. PROFILE ON THE PRODUCTION OF WOOD SCREW & RIVETS

200. PROFILE ON THE PRODUCTION OF WOOD SCREW & RIVETS 200. PROFILE ON THE PRODUCTION OF WOOD SCREW & RIVETS 200-1 TABLE OF CONTENTS PAGE I. SUMMARY 200-2 II. PRODUCT DESCRIPTION & APPLICATION 200-2 III. MARKET STUDY AND PLANT CAPACITY 200-3 A. MARKET STUDY

More information

182. PROFILE ON THE PRODUCTION OF PRINTED CIRCUIT BOARD

182. PROFILE ON THE PRODUCTION OF PRINTED CIRCUIT BOARD 182. PROFILE ON THE PRODUCTION OF PRINTED CIRCUIT BOARD 182-1 TABLE OF CONTENTS PAGE I. SUMMARY 182-2 II. PRODUCT DESCRIPTION & APPLICATION 182-3 III. MARKET STUDY AND PLANT CAPACITY 182-3 A. MARKET STUDY

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y4, 125 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y4, 125 V AC AC Line Rated Ceramic Disc Capacitors Class X1, V AC / Class Y4, 125 V AC FEATURES Complying with IEC 6384-14 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer

More information

metallbearbeitung becker gmbh The metal processors

metallbearbeitung becker gmbh The metal processors metallbearbeitung becker gmbh The metal processors Since 1996 2 Quality right from the start. Metallbearbeitung Becker GmbH was founded in Dautphetal in 1996. In 2001, the company moved to its production

More information

1 The ECN module. Note

1 The ECN module. Note Version 1.11.0 NOVA ECN tutorial 1 The ECN module The ECN is an optional module for the Autolab PGSTAT. The ECN module provides the means to perform Electrochemical Noise measurements (ECN). Electrochemical

More information

PMBFJ111; PMBFJ112; PMBFJ113

PMBFJ111; PMBFJ112; PMBFJ113 SOT23 PMBFJ111; PMBFJ112; PMBFJ113 Rev. 4 20 September 2011 Product data sheet 1. Product profile 1.1 General description Symmetrical in a SOT23 package. 1.2 Features and benefits High-speed switching

More information

BAT54 series 1. Product profile 2. Pinning information Schottky barrier diodes 1.1 General description 1.2 Features and benefits

BAT54 series 1. Product profile 2. Pinning information Schottky barrier diodes 1.1 General description 1.2 Features and benefits SOT2 Rev. 5 5 October 2012 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small SOT2 (TO-26AB) Surface-Mounted Device (SMD) plastic

More information

Postal Test Paper_P8_Intermediate_Syllabus 2016_Set 4 Paper 8- Cost Accounting

Postal Test Paper_P8_Intermediate_Syllabus 2016_Set 4 Paper 8- Cost Accounting Paper 8- Cost Accounting Academics Department, The Institute of Cost Accountants of India (Statutory Body under an Act of Parliament) Page 1 Paper 8 - Cost Accounting Full Marks :100 Time allowed: 3 hours

More information

INSTRUCTIONS TO CANDIDATES

INSTRUCTIONS TO CANDIDATES Society of Actuaries Canadian Institute of Actuaries Exam MLC Models for Life Contingencies Tuesday, April 25, 2017 8:30 a.m. 12:45 p.m. MLC General Instructions 1. Write your candidate number here. Your

More information

FORM 10-QSB. SOLIGEN TECHNOLOGIES, INC. (Exact name of small business issuer as specified in its charter)

FORM 10-QSB. SOLIGEN TECHNOLOGIES, INC. (Exact name of small business issuer as specified in its charter) UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 10-QSB [X] QUARTERLY RE PORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the quarterly period ended

More information

Talent Attraction USING DATA TO IDENTIFY AND ADDRESS WORKFORCE CHALLENGES

Talent Attraction USING DATA TO IDENTIFY AND ADDRESS WORKFORCE CHALLENGES Talent Attraction USING DATA TO IDENTIFY AND ADDRESS WORKFORCE CHALLENGES Topics The EDO dilemma Jobs and skills shortage Threats (and benefits) of automation Workforce trends Geography of jobs Emerging

More information

BY TYPE, ($ MILLIONS)... 5

BY TYPE, ($ MILLIONS)... 5 CHAPTER ONE: INTRODUCTION... 1 STUDY GOALS AND OBJECTIVES... 1 REASONS FOR DOING THE STUDY... 1 CONTRIBUTION OF THE STUDY... 2 SCOPE AND FORMAT... 2 INFORMATION SOURCES... 2 ANALYST S CREDENTIALS... 2

More information

SUGGESTED SOLUTION INTERMEDIATE M 19 EXAM. Test Code CIM 8069

SUGGESTED SOLUTION INTERMEDIATE M 19 EXAM. Test Code CIM 8069 SUGGESTED SOLUTION INTERMEDIATE M 19 EXAM SUBJECT- F.M. Test Code CIM 8069 (Date :09.09.2018) Head Office : Shraddha, 3 rd Floor, Near Chinai College, Andheri (E), Mumbai 69. Tel : (022) 26836666 1 P a

More information

PAPER 3 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING Answer all questions.

PAPER 3 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING Answer all questions. Question 1 (i) (ii) PAPER 3 : COST ACCOUNTING AND FINANCIAL MANAGEMENT PART I : COST ACCOUNTING Answer all questions. What is Cost accounting? Enumerate its important objectives. Distinguish between Fixed

More information

INTERMEDIATE EXAMINATION

INTERMEDIATE EXAMINATION INTERMEDIATE EXAMINATION GROUP II (SYLLABUS 2008) SUGGESTED ANSWERS TO QUESTIONS DECEMBER 2011 Paper-8 : COST AND MANAGEMENT ACCOUNTING Time Allowed : 3 Hours Full Marks : 100 The figures in the margin

More information

THERMOPILE DETECTORS FOR MEASUREMENT. TPD 1T 0224, TPD 1T 0524, TPD 1T 0624 General-Purpose Thermopile

THERMOPILE DETECTORS FOR MEASUREMENT. TPD 1T 0224, TPD 1T 0524, TPD 1T 0624 General-Purpose Thermopile THERMOPILE DETECTORS FOR MEASUREMENT THERMOPILE DETECTORS FOR MEASUREMENT TPD 1T 0224, TPD 1T 0524, TPD 1T 0624 General-Purpose Thermopile Applications This is our general-purpose range of thermopile detectors

More information

KENDRIYA VIDYALAYA SANGATHAN ERNAKULAM REGION SECOND PRE-BOARD EXAMINATION CLASS XII ECONOMICS (30) Time Allowed- 3 Hours

KENDRIYA VIDYALAYA SANGATHAN ERNAKULAM REGION SECOND PRE-BOARD EXAMINATION CLASS XII ECONOMICS (30) Time Allowed- 3 Hours KENDRIYA VIDYALAYA SANGATHAN ERNAKULAM REGION SECOND PRE-BOARD EXAMINATION 208-9 CLASS XII ECONOMICS (0) MM-80 Time Allowed- Hours General Instructions: i. All questions in both sections are compulsory.

More information

R10 SET a) Explain the exceptions to the law of demand. b) Discuss various determinants of demand for electronic gadgets.

R10 SET a) Explain the exceptions to the law of demand. b) Discuss various determinants of demand for electronic gadgets. R10 SET - 1 II B. Tech I Semester Regular Examinations, March 2014 MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS (Com. to EEE, ME, ECE, EIE, CSE, IT, ECC, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE

More information

The Professional Tools. CNC Rapid Prototyping machine 3 axes 3D High accuracy TECHNODRILL 3 New model. Education license.

The Professional Tools. CNC Rapid Prototyping machine 3 axes 3D High accuracy TECHNODRILL 3 New model. Education license. Circuit imprimé Français 240 rue Hélène Boucher 78530 BUC - FRANCE - Tél. : 33 (0) 1 3966 9683- Fax. : 33 (0) 1 3966 9778- E-mail : cif@cif.fr Web : www.cif.fr C.I.F. CNC Rapid Prototyping machine 3 axes

More information

Free of Cost ISBN : Appendix. CMA (CWA) Inter Gr. II (Solution upto Dec & Questions of June 2013 included)

Free of Cost ISBN : Appendix. CMA (CWA) Inter Gr. II (Solution upto Dec & Questions of June 2013 included) Free of Cost ISBN : 978-93-5034-631-0 Appendix CMA (CWA) Inter Gr. II (Solution upto Dec. 2012 & Questions of June 2013 included) Paper - 8 : Cost and Management Accounting Chapter - 3 : Labour Accounting

More information

107. PROFILE ON THE PRODUCTION REFRACTORY BRICKS

107. PROFILE ON THE PRODUCTION REFRACTORY BRICKS 107. PROFILE ON THE PRODUCTION REFRACTORY BRICKS 107-1 TABLE OF CONTENTS PAGE I. SUMMARY 107-2 II. PRODUCT DESCRIPTION & APPLICATION 107-3 III. MARKET STUDY AND PLANT CAPACITY 107-3 A. MARKET STUDY 107-3

More information

Designing with an Inverted-F PCB Antenna

Designing with an Inverted-F PCB Antenna Page 1 Application Note 5052 24 April 2008 Designing with an Inverted-F PCB Antenna For the EM250 and EM2 Platforms This document describes an Inverted-F PCB antenna designed by Ember for use with both

More information

186. PROFILE ON THE PRODUCTION OF SHOCK ABSORBER (HYDRAULIC)

186. PROFILE ON THE PRODUCTION OF SHOCK ABSORBER (HYDRAULIC) 186. PROFILE ON THE PRODUCTION OF SHOCK ABSORBER (HYDRAULIC) 186-1 TABLE OF CONTENTS PAGE I. SUMMARY 186-2 II. PRODUCT DESCRIPTION & APPLICATION 186-3 III. MARKET STUDY AND PLANT CAPACITY 186-4 A. MARKET

More information

Highway Engineering-II

Highway Engineering-II Highway Engineering-II Chapter 7 Pavement Management System (PMS) Contents What is Pavement Management System (PMS)? Use of PMS Components of a PMS Economic Analysis of Pavement Project Alternative 2 Learning

More information

Multilayer Ceramic Chip Capacitor

Multilayer Ceramic Chip Capacitor .. Features -Wide capacitance range, extremely compost size -Low inductance of capacitor for high frequency application -Excellent solderability and resistance to soldering heat, suitable for flow and

More information

State of Stress in Three Dimensions

State of Stress in Three Dimensions State of Stress in Three Dimensions Theories of failure Introduction: Due to large numbers of examples of compound stresses met with in engineering practice, the cause of failure or permanent set under

More information

INVITATION FOR QUOTATION. TEQIP-III/2017/nitr/Shopping/5 01/11/2017

INVITATION FOR QUOTATION. TEQIP-III/2017/nitr/Shopping/5 01/11/2017 INVITATION FOR QUOTATION TEQIP-III/2017/nitr/Shopping/5 01/11/2017 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the

More information

NODIA AND COMPANY. GATE SOLVED PAPER Chemical Engineering Plant Design and Economics. Copyright By NODIA & COMPANY

NODIA AND COMPANY. GATE SOLVED PAPER Chemical Engineering Plant Design and Economics. Copyright By NODIA & COMPANY No part of this publication may be reproduced or distributed in any form or any means, electronic, mechanical, photocopying, or otherwise without the prior permission of the author. GATE SOLVED PAPER Chemical

More information

Time allowed : 3 hours Maximum marks : 100. Total number of questions : 8 Total number of printed pages : 7 PART A

Time allowed : 3 hours Maximum marks : 100. Total number of questions : 8 Total number of printed pages : 7 PART A : 1 : Roll No... Time allowed : 3 hours Maximum marks : 100 Total number of questions : 8 Total number of printed pages : 7 PART A (Answer Question No.1 which is compulsory and any two of the rest from

More information

156. PROFILE ON THE PRODUCTION OF BOILER

156. PROFILE ON THE PRODUCTION OF BOILER 156. PROFILE ON THE PRODUCTION OF BOILER 156-1 TABLE OF CONTENTS PAGE I. SUMMARY 156-2 II. PRODUCT DESCRIPTION & APPLICATION 156-2 III. MARKET STUDY AND PLANT CAPACITY 156-3 A. MARKET STUDY 156-3 B. PLANT

More information

INVITATION TO BID # 465

INVITATION TO BID # 465 INVITATION TO BID # 465 Luzerne County Community College wishes to solicit bids for the work listed below. Bids must be received in the College's Purchasing Department (Building #5, Room 513) by Noon on

More information

Fairfield Public Schools

Fairfield Public Schools Mathematics Fairfield Public Schools Financial Algebra 42 Financial Algebra 42 BOE Approved 04/08/2014 1 FINANCIAL ALGEBRA 42 Financial Algebra focuses on real-world financial literacy, personal finance,

More information

MGT201 Financial Management All Subjective and Objective Solved Midterm Papers for preparation of Midterm Exam2012 Question No: 1 ( Marks: 1 ) - Please choose one companies invest in projects with negative

More information

153. PROFILE ON THE PRODUCTION OF AUTO- RADIATOR, FUEL TANK AND SILENCERS

153. PROFILE ON THE PRODUCTION OF AUTO- RADIATOR, FUEL TANK AND SILENCERS 153. PROFILE ON THE PRODUCTION OF AUTO- RADIATOR, FUEL TANK AND SILENCERS 153-1 TABLE OF CONTENTS PAGE I. SUMMARY 153-2 II. PRODUCT DESCRIPTION & APPLICATION 153-2 III. MARKET STUDY AND PLANT CAPACITY

More information

Suggested Answer_Syl12_Dec2015_Paper 10 INTERMEDIATE EXAMINATION GROUP II (SYLLABUS 2012)

Suggested Answer_Syl12_Dec2015_Paper 10 INTERMEDIATE EXAMINATION GROUP II (SYLLABUS 2012) INTERMEDIATE EXAMINATION GROUP II (SYLLABUS 2012) SUGGESTED ANSWERS TO QUESTIONS DECEMBER 2015 Paper-10: COST AND MANAGEMENT ACCOUNTANCY Time Allowed : 3 Hours Full Marks : 100 The figures in the margin

More information

INSTRUCTIONS TO CANDIDATES

INSTRUCTIONS TO CANDIDATES Society of Actuaries Canadian Institute of Actuaries Exam MLC Models for Life Contingencies Friday, October 30, 2015 8:30 a.m. 12:45 p.m. MLC General Instructions 1. Write your candidate number here. Your

More information

322 Roll No : 1 : Time allowed : 3 hours Maximum marks : 100

322 Roll No : 1 : Time allowed : 3 hours Maximum marks : 100 2/2013/CMA (N/S) Roll No : 1 : Time allowed : 3 hours Maximum marks : 100 Total number of questions : 6 Total number of printed pages : 7 NOTE : 1. Answer ALL Questions. 2. All working notes should be

More information

CLASSIFICATION OF COST

CLASSIFICATION OF COST Cost Accounting Standard 1 CLASSIFICATION OF COST Draft Developed by Technical Support and Practice Development Committee Institute of Cost and Managemet Accountants of Pakistan Implementation Status This

More information

MTP_Intermediate_Syl2016_June2018_Set 1 Paper 8- Cost Accounting

MTP_Intermediate_Syl2016_June2018_Set 1 Paper 8- Cost Accounting Paper 8- Cost Accounting DoS, The Institute of Cost Accountants of India (Statutory Body under an Act of Parliament) Page 1 Cost Accounting Full Marks: 100 Time allowed: 3 hours Section- A Answer the following

More information

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad

INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 COMPUTER SCIENCE AND ENGINEERING TUTORIAL QUESTION BANK Course Name : MANAGERIAL ECONOMICS AND FINANCIAL ANALYSIS Course

More information

SINGULUS TECHNOLOGIES. Results for the First Quarter 2015

SINGULUS TECHNOLOGIES. Results for the First Quarter 2015 SINGULUS TECHNOLOGIES Results for the First Quarter 2015 May 2015 Agenda 05/2015-2 - 1 Financials First Quarter 2 Capital Measures 3 Strategic Development 4 Appendix Key Financials 05/2015-3 - In million

More information

Evaluation Board User Guide UG-129

Evaluation Board User Guide UG-129 Evaluation Board User Guide UG-129 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com Universal Evaluation Board for Dual High Speed Op Amps

More information

Roll No : 1 : Time allowed : 3 hours Maximum marks : 100. Total number of questions : 8 Total number of printed pages : 11

Roll No : 1 : Time allowed : 3 hours Maximum marks : 100. Total number of questions : 8 Total number of printed pages : 11 Roll No : 1 : Time allowed : 3 hours Maximum marks : 100 Total number of questions : 8 Total number of printed pages : 11 NOTE : All working notes should be shown distinctly. PART A (Answer Question No.1

More information

Cost and Management Accounting

Cost and Management Accounting Paper 2B Cost and Management Accounting Syllabus................................................ 2.314 Bird's-Eye View.......................................... 2.315 Line Chart Showing Relative Importance

More information

BOOM 1-Year Price & Volume

BOOM 1-Year Price & Volume OUR STORY DMC is a diversified technology company. We are focused on growing our company by investing in people, products and businesses that serve niche global markets. Today, our portfolio consists of

More information

SUGGESTED SOLUTIONS. KE2 Management Accounting Information. March All Rights Reserved

SUGGESTED SOLUTIONS. KE2 Management Accounting Information. March All Rights Reserved SUGGESTED SOLUTIONS KE2 Management Accounting Information March 2017 All Rights Reserved Answer 01 SECTION 01 1.1 Relevant Learning outcome : 1.1.2 Explain the nature, scope and purpose of cost classifications

More information

: Sumitomo Metal Industries, Ltd. Consolidated Financial Situation and Business Results for the Third Quarter of FY 2009 (ending March 31, 2010)

: Sumitomo Metal Industries, Ltd. Consolidated Financial Situation and Business Results for the Third Quarter of FY 2009 (ending March 31, 2010) Sumitomo Metal Industries, Ltd. Consolidated Financial Situation and Business Results for the Third Quarter of FY 2009 (ending March 31, 2010) The following information was originally prepared and published

More information

187. PROFILE ON THE PRODUCTION OF SHOCK ABSORBER (SPRING)

187. PROFILE ON THE PRODUCTION OF SHOCK ABSORBER (SPRING) 187. PROFILE ON THE PRODUCTION OF SHOCK ABSORBER (SPRING) 187-1 TABLE OF CONTENTS PAGE I. SUMMARY 187-2 II. PRODUCT DESCRIPTION & APPLICATION 187-2 III. MARKET STUDY AND PLANT CAPACITY 187-3 A. MARKET

More information

edunepal_info

edunepal_info facebook.com/edunepal.info @ edunepal_info TRIBHUVAN UNIVERSITY 1.Brief Answer Questions: [10 1=10] i. Write the characteristic equation of SR flip flop. ii. BIM/Fourth Semester/ITC 220: Computer Organization

More information

MTP_Intermediate_Syl2016_June2018_Set 2 Paper 8- Cost Accounting

MTP_Intermediate_Syl2016_June2018_Set 2 Paper 8- Cost Accounting Paper 8- Cost Accounting DoS, The Institute of Cost Accountants of India (Statutory Body under an Act of Parliament) Page 1 Cost Accounting Full Marks: 100 Time allowed: 3 hours Section- A Answer the following

More information

JEM034 Corporate Finance Winter Semester 2018/2019

JEM034 Corporate Finance Winter Semester 2018/2019 JEM034 Corporate Finance Winter Semester 2018/2019 Lecture #4 Olga Bychkova Topics Covered Today Finalize more practical guidance on making investment decisions with NPV rule and capital budgeting (chapter

More information

81178 Seat No. Third Year B. B. A. Examination April / May 2003 Management Accountancy

81178 Seat No. Third Year B. B. A. Examination April / May 2003 Management Accountancy 81178 Seat No. Third Year B. B. A. Examination April / May 2003 Management Accountancy Time : 3 Hours] [Total Marks : 70 Instructions : (1) Figures to the right indicate marks of the questions. (2) Show

More information

Type AXLH -40 ºC to +150 ºC High Performance Axial Leaded Aluminum Electrolyic Capacitors

Type AXLH -40 ºC to +150 ºC High Performance Axial Leaded Aluminum Electrolyic Capacitors High Performance Axial Leaded Aluminum Electrolyic Capacitors Type AXLH capacitors are a new generation of high performance aluminum electrolytic capacitors rated up to 2000 hours at 150 ºC. They are designed

More information

Analysts and Investors Briefing September 4, ThyssenKrupp

Analysts and Investors Briefing September 4, ThyssenKrupp Analysts and Investors Briefing September 4, 2009 0 Analysts and Investors Briefing September 4, 2009 1 Summary Update on today s Supervisory Board Meeting on: New Organization Restructuring Concept Capex

More information

THE PROXIMITY OF MICROVIAS TO PTHs AND ITS IMPACT ON THE RELIABILITY

THE PROXIMITY OF MICROVIAS TO PTHs AND ITS IMPACT ON THE RELIABILITY THE PROXIMITY OF MICROVIAS TO s AND ITS IMPACT ON THE RELIABILITY Anthony Primavera Manager - CSP Consortium Universal Instruments Corporation Binghamton, New York 13902-0825. Jaydutt Joshi Package Development

More information

(SOUTHCO UTILITY) Annexure V

(SOUTHCO UTILITY) Annexure V Annexure V SOUTHCO UTILITY/RECLAIMATION OF BURNT TRANSFORMER OIL/05/2017 18 Date: 18 10 2017 RECLAIMATION OF BURNT TRANSFORMER OIL AND SUPPLY OF RECLAIMED OIL IN NEW BARRELS SUPPLIER INFORMATION THE BIDDERS

More information

Higher National Diploma in Accountancy Third Year, First Semester Examination 2014 DA3101-Advanced Management Accounting

Higher National Diploma in Accountancy Third Year, First Semester Examination 2014 DA3101-Advanced Management Accounting [All Rights Reserved] SLIATE SLIAE SRI LANKA INSTITUTE OF ADVANCED TECHNOLOGICAL EDUCATION (Established in the Ministry of Higher Education, vide in Act No. 29 of 1995) Higher National Diploma in Accountancy

More information

PART I : ENGINEERING ECONOMY

PART I : ENGINEERING ECONOMY PART I : ENGINEERING ECONOMY 1. INTEREST FORMULAS 1. What will be the amount accumulated by each of these present investments? a. LE 8,000 in 8 years at 12% compounded annually. b. LE 2,500 in 43 years

More information

Done by: MOHAMAD KHAIRUL HAJI MATUSIN YEAR 7A 2012 SEKOLAH MENENGAH JPK FUN & GAMES HOME

Done by: MOHAMAD KHAIRUL HAJI MATUSIN YEAR 7A 2012 SEKOLAH MENENGAH JPK FUN & GAMES HOME Add pic 1. 2. RESEARCH 3. IDEATION 4. DEVELOPMENT Done by: MOHAMAD KHAIRUL HAJI MATUSIN YEAR 7A 2012 5. PLANNING 6. REALISATION 7. TESTING / SEKOLAH MENENGAH FUN & GAMES HOME Mohamad Matusin

More information

A Physical Unclonable Function based on Capacitor Mismatch in a Charge-Redistribution SAR-ADC

A Physical Unclonable Function based on Capacitor Mismatch in a Charge-Redistribution SAR-ADC A Physical Unclonable Function based on Capacitor Mismatch in a Charge-Redistribution SAR-ADC Qianying Tang, Won Ho Choi, Luke Everson, Keshab K. Parhi and Chris H. Kim University of Minnesota Department

More information

General claims policy

General claims policy USA Light flat products INTRODUCTION This general claims policy covers light flat sheet and tin mill products produced at all ArcelorMittal USA flat facilities. It covers the major points of a claim policy,

More information

P8_Practice Test Paper_Syl12_Dec13_Set 3

P8_Practice Test Paper_Syl12_Dec13_Set 3 Paper 8 : Cost Accounting and Financial Management Full Marks: 100 Time : 3 hours This question paper is divided into two sections, Section A- Cost Accounting (60 marks) and Section B - Financial Management

More information

All In One MGT201 Mid Term Papers More Than (10) BY

All In One MGT201 Mid Term Papers More Than (10) BY All In One MGT201 Mid Term Papers More Than (10) BY http://www.vustudents.net MIDTERM EXAMINATION MGT201- Financial Management (Session - 2) Question No: 1 ( Marks: 1 ) - Please choose one Why companies

More information

2018 Business Priorities

2018 Business Priorities 2018 Business Priorities Lorenzo Grandi Designated President, Finance, Infrastructure and Services and Chief Financial Officer ST Revenues 2 1Q18 Revenues = $2.23B 1Q18 revenues up 22.2% year-over-year

More information

D.K.M COLLEGE FOR WOMEN (AUTONOMOUS),VELLORE-1. PG & RESEARCH DEPARTMENT OF COMMERCE ACCOUNTING AND BUSINESS FOR MANAGERS BSC - ISM

D.K.M COLLEGE FOR WOMEN (AUTONOMOUS),VELLORE-1. PG & RESEARCH DEPARTMENT OF COMMERCE ACCOUNTING AND BUSINESS FOR MANAGERS BSC - ISM D.K.M COLLEGE FOR WOMEN (AUTONOMOUS),VELLORE1. PG & RESEARCH DEPARTMENT OF COMMERCE ACCOUNTING AND BUSINESS FOR MANAGERS BSC ISM UNIT I SECTION A 2 MARKS 1. Define Accounting. 2. What is Journal? 3. Write

More information

COMMERCE & LAW PROGRAM DIVISION (CLPD) ANSWER KEY TO CS-EXECUTIVE DECEMBER-2014 (ATTEMPT) CODE-C SUBJECT : COST & MANAGEMENT ACCOUNTING

COMMERCE & LAW PROGRAM DIVISION (CLPD) ANSWER KEY TO CS-EXECUTIVE DECEMBER-2014 (ATTEMPT) CODE-C SUBJECT : COST & MANAGEMENT ACCOUNTING COMMERCE & LAW PROGRAM DIVISION (CLPD) ANSWER KEY TO CS-EXECUTIVE DECEMBER-2014 (ATTEMPT) CODE-C SUBJECT : COST & MANAGEMENT ACCOUNTING 1. If the minimum stock level and average stock level of raw material

More information

VENTURE CAPITAL TAX INCENTIVES GUIDELINES

VENTURE CAPITAL TAX INCENTIVES GUIDELINES VENTURE CAPITAL TAX INCENTIVES GUIDELINES Issued: 28 August 2001 Amended: 18 April 2014 CONTENTS Page 1.0 INTRODUCTION 3 2.0 DEFINITIONS 3 3.0 TAX INCENTIVES 6 4.0 QUALIFYING CRITERIA 8 5.0 APPLICATION

More information

Tribhuvan University

Tribhuvan University Tribhuvan University Faculty of Management Model Question BBA/BIM /4 th Semester/Cost and Management Accounting F.M.: 60 Time: 3 Hrs. P.M.: 27 Candidates are required to give answers in their own words

More information

Introduction to Finance. 1 March Examination Paper. Time: 3 hours

Introduction to Finance. 1 March Examination Paper. Time: 3 hours Introduction to Finance 1 March 2016 Examination Paper Answer any FOUR (4) questions. Clearly cross out surplus answers. Failure to do this will result in only the first FOUR (4) answers being marked.

More information

Type 943C, Polypropylene Capacitors, for High Pulse, Snubber Very High dv/dt for Snubber Applications

Type 943C, Polypropylene Capacitors, for High Pulse, Snubber Very High dv/dt for Snubber Applications Type 943 oval, axial film capacitors utilize a hybrid section design of polypropylene film, metal foils and metallized polypropylene dielectric to achieve both high peak current as well as superior rms

More information

Presented by: David Little Chairman, President & CEO. Kent Yee Senior Vice President & CFO NASDAQ: DXPE AUGUST 2017

Presented by: David Little Chairman, President & CEO. Kent Yee Senior Vice President & CFO NASDAQ: DXPE AUGUST 2017 Presented by: David Little Chairman, President & CEO Kent Yee Senior Vice President & CFO Mac McConnell Senior Vice President & CAO NASDAQ: DXPE AUGUST 2017 FORWARD LOOKING STATEMENTS This presentation

More information

College of Engineering, Pune

College of Engineering, Pune College of Engineering, Pune Wellesley Road, Shivajinagar, Pune 411 005, Maharashtra, India. www.coep.org.in Ph. No. (020) 25507009,7335 Fax. No. (020) 25507299 INVITATION FOR QUOTATION TEQIP-II/2017/coep/Shopping/16

More information

The Professional Tools. Laboratory for manufacturing of double sided PCBs With through holes METEOR Chemical process - Reference: Z13040

The Professional Tools. Laboratory for manufacturing of double sided PCBs With through holes METEOR Chemical process - Reference: Z13040 Circuit imprimé Français 240 rue Hélène Boucher 78530 BUC - FRANCE - Tél. : 33 (0) 3966 - Fax. : 33 (0) 4547 64 - E-mail : cif@cif.fr Web : www.cif.fr C.I.F. Ed.40702 Laboratory for manufacturing of double

More information

Contents. Preface to the eighth edition... Preface to the seventh edition... Foreword... CHAPTER 1 The context of costing... 1

Contents. Preface to the eighth edition... Preface to the seventh edition... Foreword... CHAPTER 1 The context of costing... 1 Contents Preface to the eighth edition... Preface to the seventh edition... Foreword... Page v vii ix CHAPTER 1 The context of costing... 1 LEARNING OUTCOMES... 1 CHAPTER OUTLINE... 1 THE NEED FOR RELEVANT

More information

SUGGESTED SOLUTIONS/ ANSWERS WINTER 2018 EXAMINATIONS 1 of 7 MANAGEMENT ACCOUNTING [M5] MANAGERIAL LEVEL-2 MARKS

SUGGESTED SOLUTIONS/ ANSWERS WINTER 2018 EXAMINATIONS 1 of 7 MANAGEMENT ACCOUNTING [M5] MANAGERIAL LEVEL-2 MARKS SUGGESTED SOLUTIONS/ ANSWERS WINTER 2018 EXAMINATIONS 1 of 7 Question No. 2 (a) (i) Daily Break-even Volume in Lunches and Dinners: Contribution Margin on Lunches and Dinners: Variable cost percentage

More information

Management Accounting (F2/FMA) September 2015 to August 2016 (for CBE exams up to 22 September 2016)

Management Accounting (F2/FMA) September 2015 to August 2016 (for CBE exams up to 22 September 2016) Management Accounting (F2/FMA) September 2015 to August 2016 (for CBE exams up to 22 September 2016) This syllabus and study guide are designed to help with teaching and learning and is intended to provide

More information

2011 FINANCIAL MANAGEMENT

2011 FINANCIAL MANAGEMENT Name :. Roll No. :..... Invigilator s Signature :.. CS / MBA (NEW) / SEM-2 (FT) / MB-207 / 2011 2011 FINANCIAL MANAGEMENT Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full

More information

Insertion loss (db) TOP VIEW SIDE VIEW BOTTOM VIEW. 4x ± ± Orientation Marker Denotes Pin Location 4x 0.

Insertion loss (db) TOP VIEW SIDE VIEW BOTTOM VIEW. 4x ± ± Orientation Marker Denotes Pin Location 4x 0. Model DC4759J52AHF Ultra Low Profile 85 2dB Directional Coupler Description The DC4759J52AHF is a low cost, low profile sub-miniature high performance 2 db directional coupler in an easy to use RoH compliant,

More information