SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. BHD INSTRUMENTATION LTD Argyll Road Edmonton, Alberta T6C4B2 Paul Quilichini Phone:

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 BHD INSTRUMENTATION LTD Argyll Road Edmonton, Alberta T6C4B2 Paul Quilichini Phone: CALIBRATION Valid To: December 31, 2020 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1, 5 : I. Electrical DC/Low Frequency Parameter/Equipment Range CMC 2, 3 ( ) Comments DC Voltage Generate (0 to 330) mv (0 to 3.3) V (0 to 33) V (30 to 330) V (100 to 1020) V 14 µv/v µv 7.8 µv/v + 9 µv 8.3 µv/v µv 14 µv/v µv 13 µv/v µv DC Voltage Measure 200 mv 2 V 20 V 200 V 1000 V 5.4 µv/v µv 3.7 µv/v µv 3.3 µv/v µv 5.3 µv/v + 57 µv 5.3 µv/v µv (1050 to ) V 0.15 % + 1 V High Voltage Inc. DVR- 150, DC Current Generate (0 to 330) µa (330 to 3.3) ma (3.3 to 33) ma (33 to 330) ma 330 ma to 3 A (3 to 20) A % µa % µa % µa % µa % + 39 µa % µa (A2LA Cert. No ) 11/28/2018 Page 1 of 8

2 Parameter/Equipment Range CMC 2, 3 ( ) Comments DC Current Measure 200 µa 2 ma 20 ma 200 ma 2 A 20 A 11 µa/a µa 12 µa/a µa 14 µa/a µa 47 µa/a µa % + 13 µa % µa Resistance Generate (0 to 11) Ω (11 to 33) Ω (33 to 110) Ω (110 to 330) Ω 330 Ω to 1.1 kω (3.3 to 11) kω (11 to 33) kω (33 to 110) kω (110 to 330) kω 330 kω to 1.1 MΩ (1.1 to 3.3) MΩ (3.3 to 11) MΩ (11 to 33) MΩ (33 to 110) MΩ (110 to 330) MΩ 330 MΩ to 1.1 GΩ % Ω % Ω % Ω % Ω % Ω % Ω % Ω % Ω % Ω % Ω % + 31 Ω % + 43 Ω % kω % + 24 kω 0.41 % kω % MΩ, IET Labs VRS kω 10 kω 100 kω 1 MΩ 10 MΩ 100 MΩ 1 GΩ 10 GΩ 100 GΩ 1 TΩ kω kω kω MΩ MΩ MΩ GΩ GΩ 0.95 GΩ TΩ Resistance Measure 2 Ω 20 Ω 200 Ω 2 kω 20 kω 200 kω 2 MΩ 20 MΩ 200 MΩ 2 GΩ 20 µω/ω µω 9.6 µω/ω + 15 µω 8.3 µω/ω + 63 µω 7.8 µω/ω µω 7.1 µω/ω + 14 mω 8 µω/ω + 52 mω 12 µω/ω Ω 20 µω/ω Ω % MΩ 0.14 % MΩ (A2LA Cert. No ) 11/28/2018 Page 2 of 8

3 Parameter/Equipment Range CMC 2, 3 ( ) Comments Capacitance Generate (220 to 400) pf (0.4 to 1.1) nf (1.1 to 3.3) nf (3.3 to 11) nf (11 to 33) nf (33 to 110) nf (110 to 330) nf (0.33 to 1.1) µf (1.1 to 3.3) µf (3.3 to 11) µf (11 to 33) µf (33 to 110) µf (110 to 330) µf (0.33 to 1.1) mf (1.1 to 3.3) mf (3.3 to 11) mf (11 to 33) mf (33 to 110) mf 0.41 % + 10 pf 0.32 % nf 0.34 % nf % nf % nf 0.18 % nf 0.17 % nf 0.18 % µf 0.22 % µf 0.18 % µf 0.31 % µf 0.34 % µf 0.34 % µf 0.38 % mf 0.35 % mf 0.35 % mf 0.57 % mf 0.84 % mf Electrical Simulation of Thermocouple Generate & Measure Type E (-250 to -100) C (-100 to -25) C (-25 to 350) C (350 to 650) C (650 to 1000) C 0.46 C 0.28 C 0.28 C 0.28 C 0.30 C Type J (-210 to -100) C (-100 to -30) C (-30 to 150) C (150 to 760) C (760 to 1200) C 0.33 C 0.28 C 0.28 C 0.29 C 0.31 C Type K (-200 to -100) C (-100 to -25) C (-25 to 120) C (120 to 1000) C (1000 to 1372) C 0.36 C 0.29 C 0.28 C 0.32 C 0.40 C Type T (-250 to -150) C (-150 to 0) C (0 to 120) C (120 to 400) C 0.55 C 0.32 C 0.28 C 0.28 C (A2LA Cert. No ) 11/28/2018 Page 3 of 8

4 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Voltage Generate (1 to 33) mv (100 to 500) khz % mv % mv % mv % mv 0.28 % mv 0.65 % mv (33 to 330) mv (100 to 500) khz % mv % mv % mv % mv % mv 0.15 % mv (0.33 to 3.3) V (100 to 500) khz % V % V % V % V % V 0.20 % V (3.3 to 33) V (100 to 500) khz % V % V % V % V % V % V (33 to 330) V % V % V % V % V % V (330 to 1020) V % V % V % V (A2LA Cert. No ) 11/28/2018 Page 4 of 8

5 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Voltage Measure 200 mv (10 to 10) Hz (40 to 100) Hz (100 to 2000) Hz % mv % mv % mv % mv % mv % mv 2 V (40 to 100) Hz (100 to 2000) Hz (100 to 300) khz (300 to 1000) khz % V % V % V % V % V % V % V 0.22 % V 0.79 % V 20 V (40 to 100) Hz (100 to 2000) Hz (100 to 300) khz (300 to 1000) khz % V % V % V % V % V % V % V 0.22 % V 0.79 % V 200 V 1000 V (40 to 100) Hz (100 to 2000) Hz (40 to ) Hz % V % V % V % V % V % V % V % V % V % V % V % V (1050 to ) V % kv High Voltage Inc. DVR- 150, (A2LA Cert. No ) 11/28/2018 Page 5 of 8

6 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Current Generate (29 to 330) µa (10 to 20) Hz (20 to 45) Hz 0.17 % µa % µa 0.23 % µa 0.61 % µa 1.2 % µa (0.33 to 3.3) ma (10 to 20) Hz (20 to 45) Hz 0.16 % µa % µa 0.15 % µa 0.39 % µa 0.77 % µa (3.3 to 33) ma (10 to 20) Hz (20 to 45) Hz 0.15 % µa 0.69 % µa % µa 0.15 % + 3 µa 0.31 % + 4 µa (33 to 330) ma (10 to 20) Hz (20 to 45) Hz 0.14 % µa % µa % µa 0.18 % µa 0.32 % µa (0.33 to 3) A 0.16 % µa % µa 0.46 % µa 2.0 % µa (3 to 20) A (45 to 100) Hz % A 0.12 % A 2.8 % A (A2LA Cert. No ) 11/28/2018 Page 6 of 8

7 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Current Measure 200 µa 10 Hz to 10 khz % µa % µa % µa 0.30 % µa 2 ma 10 Hz to 10 khz % µa % µa % µa 0.30 % µa 20 ma 10 Hz to 10 khz % µa % µa % µa 0.30 % µa 200 ma 10 Hz to 10 khz % µa % µa % µa 2 A 10 Hz to 10 khz % µa % µa 0.28 % µa 20 A 10 Hz to 20 khz (20 to 100) khz % µa % µa II. Mechanical Parameter/Equipment Range CMC 2, 4 ( ) Comments Pneumatic Pressure Generate & Measure Up to 15 kpa Up to 350 kpa % kpa % kpa DHI PPC4 Up to 7 MPa % kpa DHI PPC3 Hydraulic Pressure Generate & Measure Up to 112 MPa Up to 280 MPa % MPa % MPa DHI PG DHI PG (A2LA Cert. No ) 11/28/2018 Page 7 of 8

8 III. Time & Frequency Parameter/Equipment Frequency CMC 2, 3 ( ) Comments Frequency Measuring Equipment (0.01 to 120) Hz (120 to 1200) Hz (1.2 to 12) khz (12 to 120) khz (120 to 1200) khz (1.2 to 2) MHz Hz + 5 µhz 0.12 Hz + 5 µhz khz + 5 µhz 0.12 khz + 5 µhz 0.12 khz + 5 µhz MHz + 5 µhz 1 This laboratory offers commercial calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 The stated measured values are determined using the indicated instrument (see Comments). This capability is suitable for the calibration of the devices intended to measure or generate the measured value in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a percent or fraction of the reading plus a fixed floor specification. 4 The type of instrument or material being calibrated is defined by the parameter. This indicates the laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated for the listed measurement parameter. 5 This scope meets A2LA s P112 Flexible Scope Policy. (A2LA Cert. No ) 11/28/2018 Page 8 of 8

9 Accredited Laboratory A2LA has accredited BHD INSTRUMENTATION LTD. Edmonton, Alberta, CANADA for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the requirements of R205 Specific Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 28 th of November President and CEO For the Accreditation Council Certificate Number Valid to December 31, 2020 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.

10 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 BHD INSTRUMENTATION LTD Fraserwood Way Richmond, BC, Canada V6W 0A8 Paul Quilichini Phone: CALIBRATION Valid To: December 31, 2020 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1, 5 : I. Electrical DC/Low Frequency Parameter/Equipment Range CMC 2, 3 ( ) Comments DC Voltage Generate (0 to 330) mv (0 to 3.3) V (0 to 33) V (30 to 330) V (110 to 1020) V 38 µv/v µv 23 µv/v µv 26 µv/v µv 43 µv/v µv 10 µv/v µv DC Voltage Measure 200 mv 2 V 20 V 200 V 1000 V 10 µv/v µv 1.3 µv/v µv 3.6 µv/v µv 5.5 µv/v + 33 µv 5.5 µv/v µv DC Current Generate (0 to 330) µa 330 µa to 3.3 ma (3.3 to 33) ma (33 to 330) ma 330 ma to 3) A (3 to 20) A % µa % µa % µa % + 17 µa % µa % µa (A2LA Cert. No ) 12/5/2018 Page 1 of 8

11 Parameter/Equipment Frequency CMC 2, 3 ( ) Comments DC Current Measure 200 µa 2 ma 20 ma 200 ma 2 A 20 A 12 µa/a µa 13 µa/a ma 15 µa/a ma 46 µa/a ma 170 µa/a A 390 µa/a A Resistance Generate (0 to 11) Ω (11 to 33) Ω (33 to 110) Ω (110 to 330) Ω 330 Ω to 1.1 kω (3.3 to 11) kω (33 to 110) kω (110 to 330) kω 330 kω to 1.1 MΩ (1.1 to 3.3) MΩ (3.3 to 11) MΩ (11 to 33) MΩ (33 to 110) MΩ (110 to 330) MΩ 330 MΩ to 1.1 GΩ Fluke kω 10 kω 100 kω 1 MΩ 10 MΩ 100 MΩ 1 GΩ 10 GΩ 100 GΩ 1 TΩ kω kω kω MΩ MΩ MΩ GΩ GΩ 0.44 GΩ TΩ IET Labs VRS-100 Resistance Measure 2 Ω 20 Ω 200 Ω 2 kω 20 kω 200 kω 2 MΩ 20 MΩ 200 MΩ 2 GΩ 100 µω/ω µω 28 µω/ω + 25 µω 9 µω/ω + 51 µω 8 µω/ω µω 8 µω/ω + 5 mω 8 µω/ω + 51 mω 9 µω/ω Ω 20 µω/ω + 93 Ω 120 µω/ω + 9 Ω 1400 µω/ω Ω (A2LA Cert. No ) 12/5/2018 Page 2 of 8

12 Parameter/Equipment Frequency CMC 2, 3 ( ) Comments Capacitance Generate (220 to 400) pf (0.4 to 1.1) nf (1.1 to 3.3) nf (3.3 to 11) nf (11 to 33) nf (33 to 110) nf (110 to 330) nf (0.33 to 1.1) µf (1.1 to 3.3) µf (3.3 to 11) µf (11 to 33) µf (33 to 110) µf (110 to 330) µf (0.33 to 1.1) mf (1.1 to 3.3) mf (3.3 to 11) mf (11 to 33) mf (33 to 110) mf 0.23 % + 10 pf 0.16 % nf 0.34 % nf 0.18 % nf 0.08 % nf 0.18 % nf 0.17 % nf 0.18 % µf 0.22 % µf 0.18 % µf 0.31 % µf 0.34 % µf 0.34 % µf 0.38 % mf 0.35 % mf 0.35 % mf 0.57 % mf 0.84 % mf Electrical Simulation of Thermocouple Generate & Measure Type E (-250 to -100) C (-100 to -25) C (-25 to 350) C (350 to 650) C (650 to 1000) C 0.41 C 0.19 C 0.17 C 0.18 C 0.24 C Type J (-210 to -100) C (-100 to -30) C (-30 to 150) C (150 to 760) C (760 to 1200) C 0.26 C 0.19 C 0.18 C 0.19 C 0.22 C Type K (-200 to -100) C (-100 to -25) C (-25 to 120) C (120 to 1000) C (1000 to 1372) C 0.30 C 0.21 C 0.20 C 0.27 C 0.35 C Type T (-250 to -150) C (-150 to 0) C (0 to 120) C (120 to 400) C 0.51 C 0.23 C 0.18 C 0.17 C (A2LA Cert. No ) 12/5/2018 Page 3 of 8

13 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Voltage Generate (1 to 33) mv (100 to 500) khz % mv % mv % mv % mv 0.29 % mv 0.62 % mv (33 to 330) mv (100 to 500) khz % mv % mv % mv % mv % mv 0.16 % mv (0.33 to 3.3) V (100 to 500) khz % V % V % V % V % V 0.19 % V (3.3 to 33) V % mv % mv % mv % mv % mv (33 to 330) V % V % V % V % V 0.16 % V (330 to 1020) V % V % V % V (A2LA Cert. No ) 12/5/2018 Page 4 of 8

14 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Voltage Measure 200 mv (40 to 100) Hz (100 to 2000) Hz % mv % mv % mv % mv % mv 2 V (40 to 100) Hz (100 to 2000) Hz (300 to 1000) khz % mv % mv % mv % V % mv % mv 2.5 % V 20 V (40 to 100) Hz (100 to 2000) Hz (300 to 1000) khz % mv % mv % mv % V % mv % mv 1.2 % V 200 V (40 to 100) Hz (100 to 2000) Hz % mv % mv % V % mv % mv % V 1000 V (40 to ) Hz % V % V % V % V % V (A2LA Cert. No ) 12/5/2018 Page 5 of 8

15 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Current Generate (29 to 330) µa (10 to 20) Hz (20 to 45) Hz 0.18 % µa 0.11 % µa % µa 0.25 % µa 0.61 % µa 1.2 % µa (0.33 to 3.3) ma (10 to 20) Hz (20 to 45) Hz 0.17 % µa % µa % µa 0.15 % µa 0.39 % µa 0.77 % µa (3.3 to 33) ma (10 to 20) Hz (20 to 45) Hz 0.15 % µa % µa % µa % µa 0.15 % µa 0.31 % µa 33 to 330 ma (10 to 20) Hz (20 to 45) Hz 0.15 % µa % µa % µa 0.07 % µa 0.15 % µa 0.30 % µa 0.33 to 3 A 0.14 % µa % µa 0.46 % µa 2.0 % µa 3 to 20 A (45 to 100) Hz % A 0.12 % A 2.4 % A (A2LA Cert. No ) 12/5/2018 Page 6 of 8

16 Parameter/Range Frequency CMC 2, 3 ( ) Comments AC Current Measure 200 µa (10 to 5000) Hz % µa 2 ma (10 to ) Hz % µa 0.06 % µa 20 ma (10 to ) Hz % µa 0.05 % µa 200 ma (10 to ) Hz % + 24 µa % + 24 µa 2 A (10 to 2000) Hz % µa 0.23 % µa 20 A (10 to 2000) Hz % µa 0.24 % µa II. Mechanical Parameter/Equipment Range CMC 2, 4 ( ) Comments Pneumatic Pressure Generate & Measure Up to 350 kpa Up to 7 MPa % Pa % + 31 Pa DHI PPC4 III. Time & Frequency Parameter/Equipment Range CMC 2, 3 ( ) Comments Frequency Measuring Equipment (0.01 to 120) Hz (120 to 1200) Hz (1.2 to 12) khz (12 to 120) khz (120 to 1200) khz (1.2 to 2) MHz Hz + 5 µhz 0.12 Hz + 5 µhz khz + 5 µhz 0.12 khz + 5 µhz 0.12 khz + 5 µhz MHz + 5 µhz 1 This laboratory offers commercial and field calibration service. (A2LA Cert. No ) 12/5/2018 Page 7 of 8

17 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 The stated measured values are determined using the indicated instrument (see Comments). This capability is suitable for the calibration of the devices intended to measure or generate the measured value in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a percent or fraction of the reading plus a fixed floor specification. 4 The type of instrument or material being calibrated is defined by the parameter. This indicates the laboratory is capable of calibrating instruments that measure or generate the values in the ranges indicated for the listed measurement parameter. 5 This scope meets A2LA s P112 Flexible Scope Policy. (A2LA Cert. No ) 12/5/2018 Page 8 of 8

18 Accredited Laboratory A2LA has accredited BHD INSTRUMENTATION LTD. Richmond, British Columbia, CANADA for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the requirements of R205 Specific Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 5 th of December President and CEO For the Accreditation Council Certificate Number Valid to December 31, 2020 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.